View
0
Download
0
Category
Preview:
Citation preview
200-HWI
ITEM NO. _______________________
W164 n9221 Water street • p.O. Box 450 • Menomonee Falls, Wisconsin 53052-0450 • U.s.a. PHONE: 262.251.3800 800.558.8744 U.S.A./CANADA FAX: 262.251.7067 800.329.8744 U.S.A. ONLY
www.alto-shaam.comD U E T O O N G O I N G P R O D U C T I M P R O V E M E N T , S P E C I F I C A T I O N S A R E S U B J E C T T O C H A N G E W I T H O U T N O T I C E .P R I N T E D I N U . S . A .
200-HW series HOT FOOD HOLDiNG DrOP-iN WeLL
#08B - 06/16
Short Form Spec
The Alto-Shaam 200-HW is a hot food holding well with a stainless steel exterior. The hot well includes stainless steel interior walls with coved corners on two sides. HW and HWLF models are controlled by a single adjustable thermostat with a range of 1 through 10 and includes an indicator light. 200-HWI and 200-HWILF models are controlled by two (2) adjustable thermostats, one for each well, with a range of 1 through 10, each with an indicator light. The thermostat control is attached to the hot well base by a 72" (1829mm) flexible and water tight conduit. The hot well base is available in two depths. The 4-3/8" (111mm) deep hot well holds 4" (100mm) deep pans and the 6-3/8" (162mm) deep hot well holds 6" (150mm) deep pans. Both hot wells hold a combination of standard (gastronorm) pan sizes. The HW and HWLF hot wells include four (4) half/third-size pan divider bars and one (1) full-size pan divider bar. The HW/D443 and HW/D643 hot wells include six (6) half/third-size pan divider bars and one (1) large pan divider bar. The HWI and HWILF hot wells include four (4) half/third-size pan divider bars. The HWI/D443 and HWI/D643 hot wells include six (6) half/third-size pan divider bars.
MODEL 200-HW/D4: 4-3/8" (111mm) depth, accepts two (2) full-size (gastronorm) pans MODEL 200-HW/D6: 6-3/8" (162mm) depth, accepts two (2) full-size (gastronorm) pans MODEL 200-HW/D443: 4-3/8" (111mm) depth, accepts two (2) full-size (gastronorm) pans and two (2) third-size pans MODEL 200-HW/D643: 6-3/8" (162mm) depth, accepts two (2) full-size (gastronorm) pans and two (2) third-size pans MODEL 200-HWLF/D4: 4-3/8" (111mm) depth, accepts two (2) full-size (gastronorm) pans MODEL 200-HWLF/D6: 6-3/8" (162mm) depth, accepts two (2) full-size (gastronorm) pans MODEL 200-HWI/D4: 4-3/8" (111mm) depth, accepts two (2) full-size (gastronorm) pans MODEL 200-HWI/D6: 6-3/8" (162mm) depth, accepts two (2) full-size (gastronorm) pans MODEL 200-HWI/D443: 4-3/8" (111mm) depth, accepts two (2) full-size (gastronorm) pans and two (2) third-size pans MODEL 200-HWI/D643: 6-3/8" (162mm) depth, accepts two (2) full-size (gastronorm) pans and two (2) third-size pans MODEL 200-HWILF/D4: 4-3/8" (111mm) depth, accepts two (2) full-size (gastronorm) pans MODEL 200-HWILF/D6: 6-3/8" (162mm) depth, accepts two (2) full-size (gastronorm) pans
FactOry-InstaLLED OptIOns • Voltage Choices:
120V 208-240V 230V
• Control Box Cord Location: Back, Standard Bottom, Option
200-HW
200-HWLF
• The gentle heating capability of Halo Heat signifi cantly extends hot food holding life without
continuing the cooking process.• Provides a more appealing product with better
appearance and fresher taste.• Front-of-the-house use with an existing counter, overhead
heating, and sneeze guard system or drop into a prep table for hot food plating convenience.
• Easy drop-in installation without the need of water or drainage connections and the related installation and water usage costs.
• Maintenance savings with the elimination of lime and scale buildup associated with steam table holding.
• Increase employee safety with the elimination of burning steam when changing pans.
• Adjustable thermostat with remote control suitable for mounting provides holding temperature fl exibility without high steam table temperatures to scorch or burn.
• Stainless steel interior walls are easy to clean with coved corners on two sides of the well.
• HWI series with individual wells and independent controls expands your menu options.
IP X3
W164 N9221 Water Street • P.O. Box 450 • Menomonee Falls, Wisconsin 53052-0450 • U.S.A. PHONE: 262.251.3800 800.558.8744 U.S.A./CANADA FAX: 262.251.7067 800.329.8744 U.S.A. ONLY
www.alto-shaam.comD U E T O O N G O I N G P R O D U C T I M P R O V E M E N T , S P E C I F I C A T I O N S A R E S U B J E C T T O C H A N G E W I T H O U T N O T I C E . P R I N T E D I N U . S . A .#08B - 06/16
200-HW SERIES HOT FOOD HOLDiNG DrOP-iN WeLL
1-9/16"(39mm)
23-1
/8" (
586m
m)
20-3
/16"
(512
mm
)W
ELL
1-1/
2" (3
8mm
)
6-15/16" (175mm)
5" (127mm)
5"(126mm)
28-1/16" (712mm)
25" (635mm)WELL
200-HW/D4
1-9/16"(39mm)
28-1/16" (712mm)
25" (635mm)WELL
30-3
/16"
(765
mm
)
27-1
/4" (
691m
m)
WEL
L1-
1/2"
(38m
m)
1-7/
8"
(46m
m)
4-1/
8"
(104
mm
)
27-1
/4" (
691m
m)
WEL
L
29-1
/16"
(738
mm
)9/
16" (
14m
m) F
LAN
GE
4-3/8" (111mm)WELL
200-HW/D443
7-5/16" (185mm)5-9/16" (140mm)
26-5/8" (676mm)
3/4" (19mm)FLANGE
3/4" (19mm)FLANGE
6" (152mm)
Optional stainless steel heat shield(not factory supplied)
20-3
/16"
(512
mm
)W
ELL
22-1
/16"
(559
mm
)
4-3/8" (111mm)WELL
7-5/16" (185mm)5-9/16" (140mm)
1-7/
8"
(46m
m)
4-1/
8"
(104
mm
)
9/16
" (14
mm
) FLA
NG
E
6" (1
52m
m)
Conduit when exiting bottom
11" (278mm)
6"(152mm)
5" (126mm)
Conduit when exiting back4-
15/1
6"(1
25m
m) 4"
(102
mm
)
Ø 3/16"(5mm)
6-15/16" (175mm)
6-7/16"(163mm) 2-
1/2"
(63m
m)
4-15
/16"
(125
mm
)
1/4" (6mm)
3-3/16"(81mm)
31-3/8" (796mm)
25" (635mm)WELL
27-1
/16"
(686
mm
)
20-3
/16"
(512
mm
)W
ELL
3-7/
16" (
87m
m)
6-15/16" (175mm)
5" (127mm)
5"(126mm)
26-5/8" (676mm)
2-7/16" (60mm)FLANGE
2-7/16" (60mm)FLANGE
7-5/16" (185mm)
5-9/16" (141mm)
20-3
/16"
(512
mm
)W
ELL
22-1
/16"
(559
mm
)
2-1/
2" (6
3mm
)FL
ANG
E
4-3/8" (111mm)WELL 1-
7/8"
(46m
m)
4-1/
8" (1
04m
m)
6" (1
52m
m)
Conduit when exiting bottom
11" (278mm)
6"(152mm)
5" (126mm)
Conduit when exiting back
4-15
/16"
(125
mm
)4"
(102
mm
)
6-15/16" (175mm)
6-7/16" (163mm)
1/4" (6mm)
Ø 3/16" (5mm)
4-15
/16"
(125
mm
)
2-1/
2" (6
3mm
)
6" (152mm)
Optional stainless steel heat shield(not factory supplied)
200-HWLF/D4
200-HWLF SERIES HOT FOOD HOLDiNG DrOP-iN WeLL
INSTALLATION REQUIREMENTS- Appliance must be installed level and must not be installed in any area
where it may be directly affected by steam, grease, dripping water, high temperatures, or any other severely adverse conditions.
- To maintain proper food temperature, overhead heating is required.- Countertop material must withstand temperatures up to 200°F (93°C). - A stainless steel heat shield is recommended if the area under the
appliance is used for storage.
CLEARANCE REQUIREMENTS
1" (25mm) from combustible surfaces
OPTIONS & ACCESSORIES
Pan Divider Bar — HALF-SIZE/THIRD-SIZE . . . . . . . . . . . . . . . . . . . . . . 11318 Pan Divider Bar — FULL-SIZE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16019 Pan Divider Bar — D443/D643 SIZE . . . . . . . . . . . . . . . . . . . . . . . . . . 1012405 Locking Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5020849
200-HW PRODUCT\PAN CAPACITY* D4: 48 lb (22 kg) / D443: 64 lbs (29 kg) MAX.
MAX. VOLUME: D4: 29 qt (28 L) / D443: 37.8 qt (35.5 L)FULL-SIZE PANS: Two (2) 12" x 20" x 4"
GN 1/1 (325mm x 530mm x 100mm)HALF-SIZE PANS: Four (4) 12" x 10" x 4"
GN 1/2 (325mm x 265mm x 100mm)THIRD-SIZE PANS: D4: Six (6) 12" x 6" x 4" / D443: Eight (8) 12" x 6" x 4"
GN 1/3 (325mm x 176mm x 100mm)* Based on 4" (100mm) deep pans. Will also accept 2-1/2" (65mm) deep pans; D6 hot wells will accept 6" (150mm) deep pans.
W164 N9221 Water Street • P.O. Box 450 • Menomonee Falls, Wisconsin 53052-0450 • U.S.A. PHONE: 262.251.3800 800.558.8744 U.S.A./CANADA FAX: 262.251.7067 800.329.8744 U.S.A. ONLY
www.alto-shaam.comD U E T O O N G O I N G P R O D U C T I M P R O V E M E N T , S P E C I F I C A T I O N S A R E S U B J E C T T O C H A N G E W I T H O U T N O T I C E .P R I N T E D I N U . S . A .
26-5/8" (676mm)
9/16" (14mm)FLANGE
10-7/16" (264mm)
9-15/16" (252mm)1/4" (6mm)
Ø 3/16" (5mm)
4-15
/16"
(125
mm
)
2-1/
2" (6
3mm
)
23-3
/16"
(588
mm
)
20-3
/16"
(512
mm
)W
ELL
1-5/16" (33mm)
27-5/8" (701mm)
12" (305mm)WELL
10-7/16" (264mm)
WATERTIGHTCONDUIT
8-1/2" (216mm)
5"(126mm)
200-HWI/D4
7-5/16" (185mm)
5-9/16" (141mm)
20-3
/16"
(512
mm
)W
ELL
22-1
/16"
(559
mm
)
5/8"
(16m
m)
FLAN
GE
1-7/
8" (4
6mm
)
4-1/
8" (1
04m
m)
4-3/8" (111mm)WELL
1-1/2"(38mm) WATERTIGHT
CONDUIT
5"(126mm)
1-5/16" (33mm)
27-5/8" (701mm)
12" (305mm)WELL
30-1
/4" (
767m
m)
27-1
/4" (
691m
m)
WEL
L
10-7/16" (264mm)
8-1/2" (216mm)
200-HWI/D443
1-7/
8" (4
6mm
)
4-1/
8" (1
04m
m)
27-1
/4" (
691m
m)
WEL
L
29-1
/16"
(738
mm
)
5/8" (16mm)FLANGE
4-3/8" (111mm)WELL
7-5/16" (185mm)
5-9/16" (141mm)
6" (152mm)
Optional stainless steel heat shield(not factory supplied)
6" (1
52m
m)
Conduit when exiting bottom
11" (278mm)
6"(152mm)
5" (126mm)
Conduit when exiting back
4-15
/16"
(125
mm
)4"
(102
mm
)
#08B - 06/16
200-HWI series HOT FOOD HOLDiNG DrOP-iN WeLL
200-HWILF seriesHOT FOOD HOLDiNG DrOP-iN WeLL
4-15
/16"
(125
mm
)
2-1/
2" (6
3mm
)
10-7/16" (264mm)
9-15/16" (252mm)1/4" (6mm)
Ø 3/16" (5mm)
200-HWILF/D4
7-5/16" (185mm)
5-9/16" (141mm)
20-3
/16"
(512
mm
)W
ELL
22-1
/16"
(559
mm
)
2-1/
2" (6
3mm
)FL
ANG
E
1-7/
8" (4
6mm
)4-
1/8"
(104
mm
)
3-1/8" (79mm)
31-1/4" (792mm)
12" (305mm)WELL
27-1
/16"
(686
mm
)
20-3
/16"
(512
mm
)W
ELL
10-7/16" (264mm)
8-1/2" (216mm)
5"(126mm)
WATERTIGHTCONDUIT
3-7/
16" (
87m
m)
6" (1
52m
m)
Conduit when exiting bottom
11" (278mm)
6"(152mm)
5" (126mm)
Conduit when exiting back
4-15
/16"
(125
mm
)4"
(102
mm
)
26-5/8" (676mm)
2-5/16" (58mm)FLANGE
6" (152mm)
Optional stainless steel heat shield(not factory supplied)
W164 N9221 Water Street • P.O. Box 450 • Menomonee Falls, Wisconsin 53052-0450 • U.S.A. PHONE: 262.251.3800 800.558.8744 U.S.A./CANADA FAX: 262.251.7067 800.329.8744 U.S.A. ONLY
www.alto-shaam.comD U E T O O N G O I N G P R O D U C T I M P R O V E M E N T , S P E C I F I C A T I O N S A R E S U B J E C T T O C H A N G E W I T H O U T N O T I C E . P R I N T E D I N U . S . A .#08B - 06/16
DIMENSIONS:
OVERALL EXTERIOR WELL INTERIOR COUNTER CUTOUT CONTROL BOX CUTOUT*
height width depth height width depth width depth height width depth
200-HW/D4 7-5/16"(185mm)
28-1/16"(712mm)
23-1/8"(586mm)
4-3/8"(111mm)
25"(635mm)
20-3/16"(512mm)
27"(686mm)
22-1/2"(572mm)
4-1/4"(108mm)
5-1/4"(133mm)
10-13/16"(274mm)
200-HW/D6 9-5/16"(235mm)
28-1/16"(712mm)
23-1/8"(586mm)
6-3/8"(162mm)
25"(635mm)
20-3/16"(512mm)
27"(686mm)
22-1/2"(572mm)
4-1/4"(108mm)
5-1/4"(133mm)
10-13/16"(274mm)
200-HW/D443 7-5/16"(184mm)
28-1/16"(712mm)
30-3/16"(765mm)
4-3/8"(111mm)
12"(304mm)
27-1/4"(691mm)
27"(686mm)
29-1/2"(749mm)
4-1/4"(108mm)
5-1/4"(133mm)
10-13/16"(274mm)
200-HW/D643 9-3/16"(233mm)
28-1/16"(712mm)
30-3/16"(765mm)
6-3/8"(162mm)
12"(304mm)
27-1/4"(691mm)
27"(686mm)
29-1/2"(749mm)
4-1/4"(108mm)
5-1/4"(133mm)
10-13/16"(274mm)
200-HWLF/D4 7-5/16"(184mm)
31-3/8"(796mm)
27-1/16"(686mm)
4-3/8"(111mm)
25"(635mm)
20-3/16"(512mm)
27"(686mm)
22-1/2"(572mm)
4-1/4"(108mm)
5-1/4"(133mm)
10-13/16"(274mm)
200-HWLF/D6 9-1/4"(234mm)
31-3/8"(796mm)
27-1/16"(686mm)
6-3/8"(162mm)
25"(635mm)
20-3/16"(512mm)
27"(686mm)
22-1/2"(572mm)
4-1/4"(108mm)
5-1/4"(133mm)
10-13/16"(274mm)
200-HWI/D4 7-5/16"(185mm)
27-5/8"(701mm)
23-3/16"(588mm)
4-3/8"(111mm)
12"(304mm)
20-3/16"(512mm)
27"(686mm)
22-1/2"(572mm)
4-1/4"(108mm)
8-3/4"(222mm)
10-13/16"(274mm)
200-HWI/D6 9-5/16"(236mm)
27-5/8"(701mm)
23-3/16"(588mm)
6-3/8"(162mm)
12"(304mm)
20-3/16"(512mm)
27"(686mm)
22-1/2"(572mm)
4-1/4"(108mm)
8-3/4"(222mm)
10-13/16"(274mm)
200-HWI/D443 7-5/16"(185mm)
27-5/8"(701mm)
30-1/4"(767mm)
4-3/8"(111mm)
12"(304mm)
27-1/4"(691mm)
27"(686mm)
29-1/2"(749mm)
4-1/4"(108mm)
8-3/4"(222mm)
10-13/16"(274mm)
200-HWI/D643 9-1/4"(234mm)
27-5/8"(701mm)
30-1/4"(767mm)
6-3/8"(162mm)
12"(304mm)
27-1/4"(691mm)
27"(686mm)
29-1/2"(749mm)
4-1/4"(108mm)
8-3/4"(222mm)
10-13/16"(274mm)
200-HWILF/D4 7-5/16"(185mm)
31-1/4"(792mm)
27-1/16"(686mm)
4-3/8"(111mm)
12"(304mm)
20-3/16"(512mm)
27"(686mm)
22-1/2"(572mm)
4-1/4"(108mm)
8-3/4"(222mm)
10-13/16"(274mm)
200-HWILF/D6 9-5/16"(236mm)
31-1/4"(792mm)
27-1/16"(686mm)
6-3/8"(162mm)
12"(304mm)
20-3/16"(512mm)
27"(686mm)
22-1/2"(572mm)
4-1/4"(108mm)
8-3/4"(222mm)
10-13/16"(274mm)
*Allow 6" (152mm) clearance from control box to conduit bend
WEIGHT: est.net weight ship weight* carton dimensions* l x w x h
200-HW/D4 40 lb (18 kg) 115 lb (52 kg) 35" x 35" x 19" (889mm x 889mm x 483mm)
200-HW/D6 45.5 lb (21 kg) 110 lb (50 kg) 35" x 35" x 19" (889mm x 889mm x 483mm)
200-HW/D443 50 lb (23 kg) contact factory contact factory
200-HW/D643 56 lb (25 kg) 120 lb (54 kg) 40" x 32" x 15" (1016mm x 813mm x 381mm)
200-HWLF/D4 43 lb (20 kg) 100 lb (45 kg) 35" x 35" x 19" (889mm x 889mm x 483mm)
200-HWLF/D6 48 lb (22 kg) 110 lb (50 kg) 35" x 35" x 19" (889mm x 889mm x 483mm)
200-HWI/D4 50 lb (23 kg) 120 lb (54 kg) 35" x 35" x 19" (889mm x 889mm x 483mm)
200-HWI/D6 56.25 lb (26 kg) 116 lb (53 kg) 35" x 35" x 19" (889mm x 889mm x 483mm)
200-HWI/D443 62 lb (28 kg) contact factory contact factory
200-HWI/D643 69.5 lb (32 kg) 120 lb (54 kg) 35" x 35" x 26" (889mm x 889mm x 660mm)
200-HWILF/D4 54.25 lb (25 kg) 100 lb (45 kg) 35" x 35" x 19" (889mm x 889mm x 483mm)
200-HWILF/D6 60.5 lb (27 kg) 110 lb (50 kg) 35" x 35" x 19" (889mm x 889mm x 483mm)
* Domestic ground shipping information. Contact factory for export weight and dimensions.
ELECTRICAL:
VOLTAGE PHASE CYCLE/HZ AMPS kW PLUG CONFIGURATION
200-HW/D4 & /D6,200-HWLF/D4 & /D6,200-HWI/D4 & /D6,
200-HWILF/D4 & /D6
120 1 50/60 10.0 1.2 NEMA 5-15P15A - 125V PLUG
208 – 240 1 50/60 4.3 – 5.0 0.9 – 1.2 NEMA 6-15P15A - 250V PLUG
230 1 50/60 5.2 1.2 CEE 7/7PLUG RATED 250V
CH2-16PPLUG RATED 250V
BS1363PLUG RATED 250V
200-HW/D443,200-HW/D663,200-HWI/D443,200-HWI/D643
120 1 50/60 13.5 1.6 NEMA 5-20P20A - 125V PLUG
208 – 240 1 50/60 5.8 – 6.8 1.6 NEMA 6-15P15A - 250V PLUG
230 1 50/60 6.5 1.6 CEE 7/7PLUG RATED 250V
CH2-16PPLUG RATED 250V
BS1363PLUG RATED 250V
Cord Length: 120V - 6 ft. (1.8m) 208-240V - 9 ft. (2.7m) 230V (CEE) - 9 ft. (2.7m) 230V (CH, BS) - 8 ft. (2.5m)
Recommended