Introducing The Raceclock Wireless Grip Switch...

New! To Enhance Your Operation Introducing The

Raceclock Wireless Grip Switch System

• Plug-and-Play replacement of the “wired” Start/Stop PB600 Push-Button by Electro-Numerics.

• Receiver unit plugs into the Raceclock’s remote control port.

• Works with both LED (XL-Series) and Flip-digit (LM-Series) Raceclocks.

• Can trigger any number of Raceclocks at the same time – and/or Time Machines.

• Up to 10 Wireless Grip Switches can be used per Receiver.

• User programmable Receiver Unit provides two different modes of operation:

• Mode 1 - Performs Start, Stop and Clear operations for one or more Raceclocks.

• Mode 2 - Performs Start, Enter Splits, Stop, Recall Splits and Clear operations.

• Wireless connectivity up to 500 ft or more depending on obstacles.

• Rugged, sealed and waterproof Grip Switches do not require battery replacement.

• Grip Switch’s internal battery typically lasts up to 20 years or for up to 1.6 million button clicks.

• High resolution timing correction logic delivers the same timing accuracy as wired PB600 Button.

• Receiver is compatible other wireless devices:

• Time Machine “Wireless Raceclock Interface”

• Wireless Keypad

• Wireless Gun-Start Transducer

Raceclock Wireless Grip Switch System - Receiver Unit $195

Raceclock Wireless Grip Switch System - Grip Switch $65

To Order: Go online or call us at (800) 328-4070

Flying Feet Computers www.timemachine.org

Receiver Unit

Wireless Grip Switches

500’ Range