Info@verpa-senco.com Product Information Presentation

info@verpa-senco.com www.verpa-senco.com

SENCO CONCRETE PINNERS

Product Information Presentation

GENERAL

General information

What fastener to use in what concrete:

Thickness of Material

+ Penetration Depth

= Fastener Length

GENERAL

Cubical pressure

Cube of 150x150x150 mm Tested until it breaks to meausure

strength 2nd number in the concrete class

C16/20 A cube is stronger than a cilinder, there

for a smaller object is used.

GENERAL

Cylindrical pressure

Cilinder of 150x300 mm Tested until it breaks to meausure

strength 1st number in the concrete class

C16/20 A cylinder is weaker than a cube.

GENERAL

What fastener to use in what concrete

In steel structure beams (max 650 N/mm2): always use premium pins.

Max penetration depth = 6.5 mm

Thickness of Material (Examples)Concrete

ClassRecommended

Penetration Depth 1mm Steel Stud 3mm Steel Stud 10mm Wood

C16/20 25-28mm 25 / 32 32 38

C20/25 20-22mm 22 25 32

C25/30 15-20mm 19 19 / 22 25 / 32

C30/37 15-18mm 19 19 / 22 25

C40/50 13-16mm 15 19 / 22 25

C50/60 12-15mm 15 15 22 / 25

Premium pins advised

GENERAL

Fastener range various concrete classes

C12/15 C16/20 C20/25 C25/30 C28/35 C30/37 C35/45 C40/50 C50/600

PULL OUT AND TENSION

TO KEEP IN MIND

On site concreting can lead to more pebble-stones on the bottom than on the top side.

In such a case, on the ceiling side you need premium pins while on the floor side to can use regular pins.

TO KEEP IN MIND

In soft concrete the scoring rate is high. A normal pin is advised.

In hard concrete the nail can either bent or deform. This has an influance on the scoring rate. Therefor the premium pin is advised for usage in hard concrete.

SAP40XPSteel/Concrete Pinner 8 bar! Unique tool in the market Lightweight Trigger- and bottomfire Long thin nose 7 nail lengths

Normal and premium

Net weight: 3,2 kgNail capacity: 42 pinsDrive power: 90 JOperating press.: 5,5 – 8,3 bar

Fastener range: Collated pinsDiameter: 2,6 – 3,0 mmFastener length: 15 – 40 mm

SGP40Steel/Concrete Pinner Cordless convenience Comfort grip Long thin nose 7 nail lengths

Normal and Premium

High voltage ignition

Net weight: 4 kgNail capacity: 42 pinsDrive power: 90 JDrive time: 2 shots/secondBattery capacity: 5200 shots

Fastener range: Collated pinsDiameter: 2,6 – 3,0 mmFastener length: 15 – 40 mmFuel cell: GC0012

SGP40S (2nd generation): Short Magazine

(22 pins fitting the magazine) Block Out System Magazine “Quick Release” Depth of Drive Control

FIRST toolless “step free” DOD Control on a Concrete Pinner

Easy-Nail-Clear Magazine Magazine “Quick Release”

Optional long magazine

Net weight: 3,9 kgNail capacity: 22 pinsDrive power: 90 JDrive time: 2 shots/secondBattery capacity: 5200 shots

Fastener range: Collated pinsDiameter: 2,6 – 3,0 mmFastener length: 15 – 40 mmFuel cell: GC0012INTRODUCTIO

Q1/2012

Regular concrete pins 7 nail lengths

(15, 19, 22, 25, 32, 38, 40 mm)5 micron zinc, like nails

Premium pins (Hardened pins for hard concrete) 7 nail lengths

(15, 19, 22, 25, 32, 38, 40 mm) 5 micron zinc, like nails

FASTENERS

Fuel cells Single cell GC0012

1.300 shots, 80 ml

Premium fuel cell PC1274 1.300 shots, 80 ml, works from -15°C

FUEL CELLS

Fuel cells Blisterpack PC1254

750 shots, 2x40 ml + adaptor

FUEL CELLS

Car adaptor PC1196 12Vfor charging you batteries in the car

Gas tool cleaning kit For keeping your tool in perfect condition

ACCESSORIES

CERTIFICATES?

There is no specific standard for concrete fixing.

Only test certificates of competetion exist.

GAS TOOLS

Brand SENCO SENCO SPIT POWERS/ MAX HILTI

Model no. SGP40 SGP40S/L PULSA 700P C3 - 55010 GX120

Drive Power 90J 90J 100J 90J 100J

Pin Length Range 15- 40 mm 15- 40 mm 15- 40 mm 15- 40 mm 15- 40 mm

Actuation Type Full Sequential Full Sequential Full Sequential Full Sequential

Pin Head Type Round Head Round Head Round Head Round Head Round Head

Pin Shank Types Straight and Step Straight and Step Straight and Step Straight and Step Straight and Step

Magazine Capacity 42 pins 22 / 42pins 20 pins 42 pins 40 pins

Drives per Fuel Cell 1200 1200 650 1200 750

Fuelcell Composition Propylene Butane Propylene Butane - MAPP Formulation Propylene Isobutane

Fuel LubricationSynthetic

(Propylene Glycol)Synthetic

(Propylene Glycol) - - -

Net Fuel per Cell 40 gr/80ml 40 gr/80ml 20gr/40ml 34gr/68ml 34gr/68ml

Dimensions Fuelcell 165 mm 165 mm 115 mm 150 mm

Lowest Operating Temp. - 7°C - 7°C - 11°C - 11°C

Battery Type Ni- MH 6V Ni- MH 6V NiCD 6V 600mAh Ni- MHDisposable - 2AA Electric ignotion

Batteries 2 2 2 2 -

Drives per Charge 5200 5200 1500 5700 50000

Charge Time 2 Hours 2 Hours 1 Hour -

Max Cycle Rate 2 Shots/second 2 Shots/second 2 Shots/second 2 Shots/second -

Tool Weight 4 3,9 3.6kg - 3.8kg

Dimensions 458x139x460 458x138x340 383x295x100 mm - 432x394x133 mm

Warranty 2 Year Limited 2 Year Limited - - 2 Year

NAIL COMPARISON

Overview Senco concrete pins as an alternative for Paslode:

SENCO PINS PASLODE PINS

Regular Pins SC6

Premium Pins HC6

APPLICATIONS

Metal(stud) on steel

APPLICATIONS

Metal on steel

APPLICATIONS

Wood on concrete

In concrete minimum distance from the edge is > 76,2 mm.

Minimum distance betweennails > 102 mm.

APPLICATIONS

Metal(stud) on concrete

APPLICATIONS

Metal on stone

WASHER HOLDER

For fastening single shot attachementsPins can fix several attachements like:

Washers Metal clips Plastic clips Perfo band

APPLICATIONS

Metal on brick. When using the attachment and a washer, the metal profile is still adjustable to make it vertical aligned. After that, fix the profile in the corners.

APPLICATIONS

Plastic on concrete.

AIRCONDITIONING APPLICATION

APPLICATIONS

For all these you can of course also use aPneumatic version.

WHAT CAN HAPPEN?

Nail not deep enough- Nail too long- DOD setting not correct (SGP40S/L)- Increase pressure (SAP40)

Nail too deep- Nail too short- DOD setting not correct (SGP40S/L)- Reduce pressure (SAP40)

WHAT CAN HAPPEN?

Nail bends- Hard concrete / big pebble stones- Steel reinforcement direct under surface- Hard surface (steel)

Nail not deep enough in steel- Steel too hard

WHAT CAN HAPPEN?

Nail won’t stay in material- Base material not thick enough

(> 5mm)

Nail breaks- Base material too hard- Nail too long

FAQ’s

Q Fit the Senco pins in other toolsA Yes, they fit (except for Hilti or unknown brands)

Q Fit Senco gas in other toolsA Yes, it fits (PC1254 is universal), gas fuel is lubricant and gives no negative result

(even more shots are possible)

Q Which nail to be used for which applicationA Use the table (advice, always test on site)

Q What service needs to be done on the tools?A Tool needs to be proper managed, and needs

cleaning (interval depending on use)

Info@verpa-senco.com Product Information Presentation

Documents

Contact: info@diamondfasteners · Contact: info@diamondfasteners.com. Contact: info@diamondfasteners.com. Contact: info@diamondfasteners.com

· Web viewPlace your sub heading here Place info here Place info here Place info here Place info here Place info here Place info here Place info here Place info here Place info

info info info info info info - UV2Suv2s.cerimes.fr/media/revue-eps/media/articles/pdf/70215-74.pdf · Une intervention initial dee Marie Hélène ... mai qu'aprè un exégèse du

Manual PCE-009 flow meter PCE-009 flow meter info@tursdaletechnicalservices.co.uk info@tursdaletechnicalservices.co.uk info@tursdaletechnicalservices.co.uk info@tursdaletechnicalservices.co.uk

Decision-Tree LearningSplit info: info([7,7]) 1.000 Split info: info([8,6]) 0.985 Gain: 0.940-0.788 0.152 Gain: 0.940-0.892 0.048 Info: 0.788 Info: 0.892 Humidity Windy Day attribute

Carparts Onlineshop...559004, ERA Onderdrukpomp, remsysteem Artikel informatie - 559004, Merk Artikelnummer Type beschrijving Artikelstatus Verpakkingseenheid Aa ntal per verpa kl

Questions? Comments? e-mail: toolprof@senco.com PC 1010 … · 2019. 10. 25. · compressor. The symbols set to the left of this paragraph are “Safety Alert Symbols”. ... debris

General Info Communications Info ATIS

2016 - SÜDPACK Verpackungen · 2016 Sustainability Report. 2 2TTThis SutSaunu bTlyRep ThorfkdcTmÜDP This Sustainability Report is the first of its kind compiled by SÜDPACK Verpa-ckungen

Evaluating host plant resistance in cotton …Heliothis virescens F.) and bollworm (Helico- verpa zea Boddie) are consistently present [18,19] and have a large economic impact on production

DISPLAY SYSTEMS INFO RAIL / INFO RAIL+ / INFO STRIP · 48 artiteq.com info rail / info rail+ / info strip display systems info rail 05.49025 info rail white 25 cm includes fastener

PalletPro 70 - Senco EMEA...Questions? Comments? call SENCO’s toll-free Action-line: 1-800-543-4596 (North and South America Only) or e-mail: toolprof@senco.com Senco Products Inc

Verpa conica. - FUNGI Mag · just before true morels (indeed, in some places Verpas are known as “early morels”) and many people throw them into the basket with any morels they

АЛЬГОЛОГИЯ И МИКОЛОГИЯ - bio.bsu.by · Claviceps purpurea, анаморфа Sphacelia segetum Cordiceps militaris ... M. conica Gyromitra esculenta Verpa bohemica

InduSoft.com info@InduSoft.com. InduSoft.com info@InduSoft.com

Property Info Financial Info Property Features

· Audi Media Info . Audi Media Info . Audi Media Info . Audi Media Info . Audi Media Info . Audi Media Info . Audi Media Info . Audi Media Info . Audi Media Info . Author: DAG5FDW

Instructor Info Course Info

Private Passivve Income Info - PPi Info

Presenter Presenter Info Info -- Andreas ... · Presenter Presenter Info Info -- Andreas AntonopoulosAndreas Antonopoulos Education MBA, 2001, Weatherhead School of Management, Case