View
299
Download
32
Category
Tags:
Preview:
Citation preview
FORTUNE ENTERPRISE
INSTALLATION DOCUMENT
INDEX
HARDWARE GUIDELINES
PROCEDURES FOR CREATING THE DATABASE
INSTALLING THE VB SETUP CONTROLS & DATE TIME SETTINGS
ODBC SETUP
MAPPING THE NETWORK DRIVE FOR FORTUNE
CREATING THE SHORT CUT FOR REGDLL/REGXP
EXECUTION OF REGDLL/REGXP
CREATING THE SHORT CUT FOR PMSV33
TABLE CREATION OF FORTUNE
PROCEDURES FOR RESTORING THE DATABASE
ACTIVATION OF LOGIN TO PMS DATABASE
RECOMMENDED HARDWARE CONFIGURATION
SERVER SPECIFICATIONS:
PC Based Server (INTEL)PENTIUM IV Processors 2.4 GHz, L2 Cache 512 KB (and above)1 GB SD RAM upgradable to 2GB MB RAM2 x 40.1 GB HDD, FAST SCSIFloppy Disk Drive 1.44 MBMonitor SVGA color 14’Keyboard, MouseCD-ROM 52xCD (and above) SCSI Drive (high speed CD ROM drive recommended)Ultra Wide SCSI controllerDAT Tape drive 12 GB storage Modem 56 KBPS (for remote support and upgrades)100 MBPS Intel Express Pro or Equivalent
Windows 2000 / 2003 licensed copy based on No. of users to be installed based on specs as followsNetwork Partition: 25% of total Disk space. (for Windows NT system files and utilities)Rest of the disk space will be used for SQL server/Fortune applications/DatabaseConfigure the Network Partition as Drive C: and the Rest of the Disk as Drive D:Microsoft SQL Server (RDBMS) licensed copy based on No. of users to be installed on Windows NT Server
CLIENT SPECIFICATIONS:
PENTIUM 1.6 GHz Processor (and above) Cache 256 KB L2 256 MB RAM upgradable to 512 MB RAMHard Disk 40.1 GBFloppy Disk Drive 1.44Monitor SVGA color 14’Keyboard & Mouse100 MBPS Intel Express Pro or Equivalent
Printers 80/300 CPS or Laser printer as required. Dot Matrix printers should have push tractor mechanism. (This is required for pre-printed stationary)
Windows 98/2000 / XP / 2003 Workstation licensee copies as per requirement and number of users
MS OFFICE 2000 Professional Version to be installed on nodes where Fortune GUI is being used.
Anti-virus software to be installed on all clients nodes.
PROCEDURES FOR CREATING THE DATABASE
After installing the MSSQL 7.0/2000 please follow the below mentioned steps for creating database, creation of the user and assigning rights to the newly create user.
Fig.1
Open the SQL7.0/2000 Enterprise manager by going to start, programs & sql7/2000 and select the Enterprise manager as shown below.
Fig.2
Double click the Microsoft SQL ServerDouble Click SQL Server GroupsOn double clicking the sql server Group you will get the installed sql serverThis will invoke the newly installed or an installed SQL Server
Fig.3
Locate the database folder which will resided below the sql server In the below mentioned case its (Local)(Windows NT) it can also be your System name/Server Name.
Fig.4
Right click the database folder you will be prompted for a new database drop box
Fig.5
Type the name of the database In the below Mentioned case it is PMS
In the location option where in you have to locate a drive which is having a larger place to accommodate database and its high transaction. Ensure that you select a larger partition for a smooth operation of SQL Server.
This completes the Creation of the database.
Fig.6
Procedure for creating the User and assigning the rights
Click on the + mark associated with the Security , Right click on the Logins You will be prompted for the creation of the new login
Fig.7
In this screen you are having 3 tabs…namely General, Server Roles, Database Access
Perform the following General Option screen
Enter the name of the Database User (In the below mentioned case its PMS)
1.1 Choose SQL Server Authentication and type the password In the last option of this page will be Defaults wherein you have to select the language and default database. Let the language remains default and select the database as PMS
Server Roles:Leave it as defaults
Fig.8
In Database Access Screen perform the below mentioned activities
Select the database what you have created (PMS) {Tick the Check Box associated with the database PMS}
In the Database roles for ‘pms’Select the Public and db_owner checkboxes
Followed by pressing OK will prompt you for reconfirming the password for the userEnter the same password what you entered in the general options
Fig.9
Fig.10
Double click the databases and Right click the database (PMS) wherein you will get a list of databasesNamely : MASTER,MODEL,MSDB,NORTHWIND,PUBS ,TEMPDB (Which are created during the MSSQL 7.0 Installation by default) & PMS (created newly)PMS will be listed among these databases.
Fig.11
In the Option screen Please ensure that AUTO CLOSE,AUTO SHRINK, AUTOCREATE STATISTICS & AUTO UPDATE STATISTICS options are checked (Clicked).
Fig.12
Fig.13
In the Permission window you have to select all the checkboxes for both PUBLIC and PMS user
Proceed with apply
This above mentioned process will complete the procedure of creating the user and assigning the rights to the PMS user.
INSTALLING THE VB SETUP CONTROLS & DATE TIME SETTINGS
VBSETUP/XPETUP Folder Run The Setup.exe file.
Skip all the Error Message. Once Install completed please Re-Start the Machine.
DATE TIME SETTINGS
Control Panel
Regional and Language Options
Customize
Short Date Format : dd/MM/yy Long Date Format : dddd, MMMM dd, yyyy
ODBC SETUP PROCEDURE
From Desktop Click ON START -> RUN -> Type in ODBCAD32 -> Click on OK
Click on ADD
Select SQL SERVER -> Click on FINISH
Type in as Shown and Click on NEXT
Click on the selection as shown by the red circle and type in the Login ID : PMSPassword :PMS. Click on NEXT
Enter the information as Shown and click on NEXT
Click on FINISH
Click on Test Data source
This message should come up on successful completion of the procedure. Click on OK
Click on OK .
Click on OK
Fortune is ready for execution.
MAPPING THE NETWORK DRIVE FOR FORTUNE
Network Neighborhood
Configure PMS directory from Server to any drive(Assume Drive T:)
CREATING THE SHORT CUT FOR REGDLL/REGXP
DesktopNewShortcut T:\REGXP.EXE
EXECUTION OF REGDLL/REGXP
CREATING THE SHORT CUT FOR FORTUNE ICON
DesktopNewShortcut T:\PMSV33.EXE
TABLE CREATION OF FORTUNE
DesktopStartRunPMSV33TPMSSETUP.EXE
Select the DSN Click On STARTPROCEDURES FOR RESTORING THE DATABASE
Open the SQL7.0/2000 Enterprise manager by going to start, programs & sql7/2000 and select the Enterprise manager as shown below.
Select the Database
Right ClickAll TasksRestore Database
Select the location of the Backup File
Mention the physical path of the file name(.mdf & .ldf)
Click on Force Restore Over existing database OK
ACTIVATION OF LOGIN TO PMS DATABASE
Open the SQL7.0/2000 Enterprise manager by going to start, programs & sql7/2000 and select the Query Analyzer as shown below.
Log in ScreenLogin SA
Execute the following command by clicking F5
This will enable login to PMS
Recommended