View
2
Download
0
Category
Preview:
Citation preview
technical
i.box
i.box A frameless free standing structureof glass modules and accessories thatcombine to optimise functionality andpromote information hubs within openplan environments.
i.box design, engineering and material selection is based on Schiavello’s environmental design principles to reduce environmental impact.
Indexmodule options 03junctions and connectors 04-05 introduction 06-07accessories 08product specifications 09
2400mmNominal(Floor to Ceiling)
2400mmNominal(Floor to Ceiling)
2400mmNominal(Floor to Ceiling)
2400mmNominal(Floor to Ceiling)
2400mmNominal(Floor to Ceiling)
2400mmNominal(Floor to Ceiling)
i.boxoverview and layout examples
A 360° panoramic transparent structure enhancing openness and light. Subtle design makes it suitable for any area as a demountable, temporary or permanent structure.With a choice of either free-standing 2400mm or full height design i.box is versatile and unobtrusive to surrounding services.
Illustrated are examples showing the modularity of the i.box system and how modules configure to create stand-alone demountable structures. Also shown are examples of modules being combined and configured with existing solid surfaced walls.By combining the standard module sizes, and the range of complimenting accessories, the flexibility of the i.box system makes practically any requirement possible.
SINGLE i.box REGULAR2 m x 3 m
SINGLE i.box SQUARE4 m x 4 m
SINGLE i.box SQUARE3 m x 3 m
SINGLE i.box SQUARE5 m x 5 m
DOUBLE i.box TO EXISTING REAR WALL3 m x 3 m (each space)
TRIPLE i.box IN STAGGERED CONFIGURATION4 m x 4 m (each space)
2400mmNominal(Floor to Ceiling)
2400mmNominal(Floor to Ceiling)
300mmInfill
Module
2700mmNominal(Floor to Ceiling)
2700mmNominal(Floor to Ceiling)
Designates door opening and sliding direction
i.box_03
i.box application possibilites include:•Offices •Quietspaces•Waitingareas •Presentationrooms•Meetings|conferences •Productshowcases(furniture,cars)•Training|workshops •Coffeebar| zones•Thinktanks • Internethotspots(publicspaces)•Libraries •Pop-upretailing
DOUBLE i.box WITH CENTRE OPEN DIVIDING SPACE4 m x 4 m (each space)
QUAD i.box CONFIGURATIONdimensions: 2 spaces - 3 m x 3 m 2 spaces - 3 m x 4 m
FULL HEIGHT-DOUBLE i.box CONFIGURATION TO EXISTING REAR WALL2700 mm high (nominal) infill modules from 2400 mm2 m x 3 m
FULL HEIGHT-DOUBLE i.box CONFIGURATION TO EXISTING REAR WALLmodules 2700 mm high (nominal) floor to ceiling4 m x 4 m
LEGEND
Designates full module width of 1000 mm
Designates plaster or solid wall for i.box mount
1. 2. 4. 5. 8.3. 7.6.
i.box junctions I connections
• i.boxisacontemporary,framelessstructuredesignedtooptimise functionality via a host of intersection possibilities that include 3-way, 4-way and adjoining permanent walls.• Itisidealasameetingroomoranoffice.•Freestandingandconfigurabletoclientneeds.• Interchangeablepanelsmakei.boxquicktoassembleandeasyto relocate, meeting the ever changing needs of dynamic workspaces.•Uniquedesigndetailandapplication.•Supportedbyarangeofaccessories.
Configuration:•Standardheight2400mmbutbetween2100mmand2700mmalsoavailable upon request.•500mmor1000mmwideglassmodules,orcustomnominalwidths.•Modular-easilyreconfigurable.•Demountable-suitableasatemporary,semi-temporaryor permanent structure.
glass module
wall
wall
3 mm channeli.box small door jamb
i.box wallstarter
glass module
stainless stealdoor handle
glass door
floor track
glass module glass module
3-way joiner
packers
infill1.5 mm channel
floor track structural joiner
glass module glass module
glass module
floor track inline joiner
glass module glass module glass module
glass module
corner joiner
floor track
duct
duct cover
37 mm
37 mm
100 mm
1.5mm channel
3mm channel
i.box wallstarter
infill
skirtingduct wall
1. 2. 4. 5. 8.3. 7.6.
[1] WALL STARTER ASSEMBLY(startingdoorjambsfromwalls)
[4] WALL STARTER ASSEMBLY(forovercomingexistingskirting)
[6] STRUCTURAL MULLION
[7] INLINE JOINER
[2] 3 - WAY 90° JUNCTION
[5] WALL STARTER ASSEMBLY(standardconfiguration)
[3] POWER DUCT
[8] 2 - WAY 90° JUNCTION
i.box_05
snap on head track covers (optional)
head track
patch section
glass module
floor track
glass base adjuster
patch skirt
snap on head track covers (optional)
head track
patch section
glass module
floor track
glass base adjuster
patch skirt
snap on head track covers (optional)
head track
patch section
glass module
structuralmullion
floor track
glass base adjuster
patch skirt
head track
top fullpatch assembly
inline joiner
butt join in floor track
head track
cornerpatch assembly
corner joiner
butt join in floor track
glassmodule
floortrack
glassmodule
floortrack
head track
three waypatch assembly
three way joiner
butt join in floor track
glassmodule
floortrack
head track
top halfpatch assembly
shelf mount
butt join in floor track
glassmodule
floortrackand skirting
floor track inline joiner
glass module glass module
glass module
glass module
corner joiner
floor track
floor track
glass module glass module
3 way joiner
floor track structural joiner
glass module glass module
14.4 mm
13.2 mm
75 mm
75mm
74.5 mm
120 mm
13.2 mm
79.80 mm
120 mm
135 mm
79.80 mm
50mm
100 mm
24.3 mm
14.4 mm
50 mm
80 mm
50 mm
80 mm
snap on head track covers (optional)
head track
patch section
glass module
floor track
glass base adjuster
patch skirt
79.80 mm
50mm
100 mm
i.boxintroduction
Key Features•Modulesare12mmthicktoughened(safety)glasswithpowdercoated aluminium floor tracks and top transom rails with accessory mounting capability.•Ultraslimaluminiummodulejoiners.•Standardmodulewidthstofacilitatefastassemblyandsimplify future re-arrangements.
•Selectionofglassfinishesandcoloursthatcanaccommodatevinyland optically clear printed graphics.•Glassdoormoduleswithinternalorexternalmount,capabilityplus optionalslidingorswingopening.Co-compliancewithAustralian Standards(physicaldisabilityA.S1428.1-2009,section13.5doorcontrols13.5.3)•SeamlesscompatibilitywithotherSchiavellosystems,includingUltimet andUnimettiletypepanelsystems.
INLINE JOINER ASSEMBLY
CORNER JOINER ASSEMBLY
plan-top assembly
plan-top assembly
plan-top assembly
plan-top assembly
plan-base assembly
plan-base assembly
plan-base assembly
plan-base assembly
elevation
elevation
elevation
elevation
inline joiner profile
corner joiner profile
three way joiner profile
three way joiner profile
section
section
section
section
THREE WAY JOINER ASSEMBLY
STRUCTURAL MULLION ASSEMBLYStructuralMullionsareloadbearingandareusedinlieuof‘inlinejoiners’,Theyconnectmodules as well as providing attachment for accessories. ie: shelves etc.
snap on head track covers (optional)
head track
patch section
glass module
powerduct
floor track
glass base adjuster
patch skirt
head track
headtrack
headtrack
GPO cutouttop fullpatch assembly
halfpatch
doordoor pelmet section
powerduct and cover
floortrack
floortrack
glassmount
glassmount
shelfmount
datacutout
butt join in floor track
glass module
glass module
duct
duct cover
snap on head track covers (optional)
glass door module
glass module
floor track
door guide profile
head track
patch section
patch skirt
ceiling
halfpatch
doordoor pelmet section
glass module
glass module
floor track
glazing channel
floor track
halfpatch
glass module
door
headtrack
doorpelmet
ceiling
ceiling
headtrack
glazingchannel
100 mm
35.7mm
48 mm
68 mm
94mm
35mm156 mm
266 mm
box section
doorpelmet
door pelmetsection
ceiling channel
SERVICEDUCT ASSEMBLYServiceduct panels are positioned betweenthei.boxglassmodules.Theyallow services cabling to be routed from either the floor or ceiling. Services outlets(power/data)aremountedtothe face of the powerduct providing convenient user access.
i.boxintroduction
plan-top assembly
plan-base assembly
plan-base assembly
plan-base assembly
plan-base assembly
elevation
elevation
elevation
elevation
service duct profile
ceiling channel profile
glazing channel profile
section
section
section
section
SLIDING DOOR ASSEMBLY
HEADTRACK TO CEILING(FULL LENGTH)
HEADTRACK TO CEILING(GLASS INFILL)
i.box_07
bar
screenflat screen
hook
code LEC-SS
Starter Socket
code LEC-TP
Tee - Plug
code LEC-EX-AS
Installation LeadRight Angle Socket
code LEC-JB
Junction Box
code LEC-EX
Installation Lead
Power Module Clip
code CLIP 62
LEC-PM4
code LEC-PM2
Dual Power ModuleQuad Power Module
code NGDM/2
NGDM/4
NGDM/6
Data modules
i.box accessories
SLIDING ACCESSORY BOARDS - FULL HEIGHTWheel assemblies attached at the top of boards run smoothly in the i.box top track, while horizontally fittedguidingwheelsrunagainstthebottomtrack.ThispermitstheeasymovementandpIacementofthe board to any position along the wall as required.
ADO STRING CURTAINExternal attachment to top track.Othercurtainstospecification.
HINGED DOOR (OPTIONAL)Self closing mechanism, available hingedleftorrighthand.Optionallocking.
STANDARD DOOR HANDLE
SHELVESAttachtovertical‘StructuralMullionsandpositionatrequiredheight.
PLASMA SCREEN MOUNTING BRACKETAttachestoeithertwoStructuralMullions,oralternativelyoneStructuralMullionandonesideofaPowerduct.
LETTRIC SOFTWIRING SYSTEMPowerisdeliveredtothei.boxPowerductviatheSchiavellosoftwiringsystem.Thesystemiseasilyconnected, disconnected or relocated without the need to isolate power and with minimal inconvenience.
width PSMB10001050mmwide PSMB20002050mmwide
depth 270mm
length 1600 mm
short shelf
depth 270mm
length 2600 mm
long shelf
Whiteboard
nominal panel heightx900mmwide
Graphic Panel
2385mmhighxnominal panel width
Fabric Covered Acoustic Board - pinnable
2385mmhighxnominal panel width
Resource Utilisation
EMS includes?
Management
WasteMinimisation Energy Emissions
MaterialsMinimisation
Product Stewardship Modular
Reusability
EMS?DurabilityEMSISO
14001Certifited?
EcoPreferredContent
Designedfor
Disassembly(Maximum
ratingavailable for
MAT-3)
ProductScore
(%)
PointsAwardedfor thisCredit
i-box <5% Yes Yes Yes Yes Yes Yes Yes Yes>10yrs >90% 83.3 3
product specificationsconstruction I finishes I accessories I cable reticulation I warranty I sustainability
Modularityi.box is a fully refined office partition system manufactured in Australia by Schiavello. It is a fully modular glass and aluminium based free standing structure, connected via ultra slim aluminium joiners.
i.box design, engineering and material selection is based on Schiavello’s environmental design principles to reduce environmental impact.
AssemblyHeadtrack sections are produced to a maximum length of 4.5 metres, before a steeljoining spline is necessary.
Standards12 mm toughened glass modules and doors tested to Australian standards AS1288, glass in buildings.i.box sliding door is co-compliant with Australian Standards (physical disability A.S 1428.1-2009, section 13.5 door controls 13.5.3).
FinishesAluminium components: powder coated in a range of exc:lusive and non-exclusive finishes.Glass modules: 12 mm toughened safety glass.Sound absorbing panels: available in a range of colours and fabric types.Whiteboards: available in both acrylic and vitreous enamel finishes.Powder coating: conforms to Australian Standards: Metal AS 4506-2005 Aluminium AS 3715-2002.Door hardware: incorporates heavy duty lock and stainless steel handles.
Rubber door jam buffer for soft closing doors.
DimensionsSize: 2400 H x 500 W modulesSize: 2400 H x 1000 W modules
Floor AllowanceRecommended variation in floor level to be within 10 mm, however, accompanied with laser line measurements, greater variations of up to 45 mm may be accommodated, dependent on circumstances.
For completely enclosed walls, i-box installations will be required to comply with building codes in regard to services such as ventilation, smoke alarms and fire sprinklers.
SustainableThe i.box Glass Module partitioning system is manufactured in our ISO AS/NZS 14001 externally accredited production facility. The system has a durability life span of >1Oyrs is entirely demountable, modular and designed for complete disassembly. The system can then be re-erected utilising 100% of all component parts.
When evaluating the system for its Green Star (MAT-3 Walls and Partition) performance the Schiavello EMS includes all of the items set out under the Green Star EMS criteria including product stewardship.Below is simplified MAT-3 calculation spreadsheet for the i.box system.
AccessoriesA PVC track guide is inserted into the i.box head track to facilitate the operation of wheeled accessories, including whiteboards and sound absorbing panels. The track and trolley system can be used in both inside and outside channels of the i.box headtrack. Up to 50kg of load per trolley is recommended. High load rollers are supplied with all sliding components and accessories;
- Clip in aluminium extrusions for covering the head track channels are optional extra for locations where it is visible from higher elevations. (note: sliding apparatus would be limited in use to either internal or external uses);
- Power duct for cable reticulation;
- Plasma mounts for mounting plasma or LCD screens;
- Custom shelving (Shelf braces satisfactory for 33kg point loads);
- Sound absorbing panels, available in a range of colours and fabric types and mounting to the i.box headtrack;
- Whiteboards - standard size from 2385 X 900 X 12 mm, mounting into the headtrack channel. The whiteboards are sourced and manufactured in Australia by Schiavello and utilize E-Zero MDF;
- Custom window furnishings - string or fabric curtains;
- Custom raised flooring finished in a range of fabric tiles.
Cable ReticulationThe system that can be hard or soft wired includes integrated components that provide efficient means of routing services cabling from the ceiling, walls or floor. ie: Powerduct allowing user convenient location of outlets. The softwiring electrical system is Schiavello Lettric certified to AS/NZS 3131 and AS/NZS 61535.
WarrantyThe manufacturer warrants the system for a period of not less than 5 years against faulty materials and workmanship and guarantees the supply of parts and service of all standard components for a period of not less than 10 years from date of installation.
schiavello.com/ibox SCH/MIB02-A
SchiavelloGroupPtyLtdreserves the right to change any or all details without prior notice. All dimensions stated within this document arenominaland/orapproximate only and subject to variation.
Melbourne Head OfficeSchiavello(Vic)PtyLtd1 Sharps RoadTullamarineVICAustralia3043T:61)393308888F:61)393308899
Melbourne ShowroomSchiavello(Vic)PtyLtdMetropol8WhitemanStreetSouthbankVICAustralia3006T:61)396741500F:61)396741650
AdelaideSchiavello(SA)PtyLtdGroundFloor,101CurrieStreetAdelaideSAAustralia5000T:08)81122300F:08)82311419
BrisbaneSchiavello(Qld)PtyLtd265CoronationDriveMiltonQLDAustralia4064T:07)33683388F:07)33682125
CanberraSchiavello(ACT)PtyLtd2-6CollieStreetFyshwickACTAustralia2609T:02)61240500F:02)62804370
PerthSchiavello(WA)PtyLtd1315HayStreetWestPerthWAAustralia6005T:08)94206588 F:08)93221337
SydneySchiavello(NSW)PtyLtd69CampbellStreetSurryHillsNSWAustralia2010T:02)92113311F:02)92123788
SingaporeSchiavelloSingaporePteLtdNo.1MagazineRoad#01-05CentralMallSingapore059567T:65)65338011F:65)65332811
Recommended