View
221
Download
0
Category
Preview:
Citation preview
HSG326
Wireless Hotspot Gateway
Copyright Notice This document is protected by USA copyright laws and other laws. Besides, the document is the property of 4IPNET, INC. You may not copy, reproduce, distribute, publish, display, perform, or modify any part of this publication in any form or by any means without prior written permission from 4IPNET, INC. You may not alter or remove any copyright or other notice from copies of the content. All other brand and product names are claimed or registered marks of their respective companies or organizations. All rights reserved.
To download up-to-date version, please visit www.4ipnet.com.
http://www.4ipnet.com/Table of Contents
FCC CAUTION ...................................................................................................................... i
CE CAUTION ....................................................................................................................... ii
Preface ............................................................................................................................... 1
Package Contents ............................................................................................................... 1
System Overview ................................................................................................................ 2
Hardware Installation ......................................................................................................... 4
Getting Started ................................................................................................................... 7
Common Settings ............................................................................................................. 10
Step 1. Time Zone...................................................................................................... 10
Step 2. WAN Interfaces .............................................................................................. 11
Step 3. Configure Service Zone Settings with ESSID ................................................... 11
Step 4: Configure Service Zone Settings with Authentication .................................... 12
Step 5: Add Local users .............................................................................................. 13
Step 6: Configure On-Demand user billing plan ......................................................... 14
Step 7: Configure Guest Authentication .................................................................... 16
Step 8: Configure QoS Policy for User Group (Optional) ............................................ 17
Quick Installation Guide HSG326 Wireless Hotspot Gateway ENGLISH
Copyright 4IPNET, INC. All rights reserved. i
FCC CAUTION
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and proven to comply with the limits for a class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
---Reorient or relocate the receiving antenna.
---Increase the separation between the equipment and receiver.
---Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
---Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device meets the governments requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The device contains a low power transmitter which will send out Radio Frequency (RF) signal when transmitting. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.
Quick Installation Guide HSG326 Wireless Hotspot Gateway ENGLISH
Copyright 4IPNET, INC. All rights reserved. ii
CE CAUTION
Declaration of Conformity with Regard to the 1999/5/EC (R&TTE Directive) for European Community, Switzerland, Norway, Iceland, and Liechtenstein
Model: HSG326
For 2.4 GHz radios, the device has been tested and passed the requirements of the following standards, and hence fulfills the
EMC and safety requirements of R&TTE Directive within the CE marking requirement.
Radio: EN 300.328
EMC: EN 301.489-1, EN 301.489-17
EMC: EN 55022 Class B, EN 55024:+ A1 + A2 including the followings:
EN 61000-3-2, EN 61000-3-3
EN 61000-4-2, EN 61000-4-3, EN 61000-4-4
EN 61000-4-5, EN 61000-4-6, EN 61000-4-11
Safety: EN 60950-1 + A11
Caution:
This declaration is only valid for configurations (combinations of software, firmware, and hardware) provided and supported by 4ipnet Inc. The use of software or firmware not provided and supported by
4ipnet Inc. may result in the equipment no longer being compliant with the regulatory requirements.
European standards dictate maximum radiated transmit power of 100mW EIRP and frequency range 2.400-2.4835
GHz. This equipment is intended to be used in all EU and EFTA countries. Outdoor use may be restricted to certain
frequencies and/or may require a license for operation. Contact your local regulatory authority for compliance.
Taiwan NCC Statement
NCC :
Quick Installation Guide HSG326 Wireless Hotspot Gateway ENGLISH
Copyright 4IPNET, INC. All rights reserved. 1
Preface The 4ipnet HSG326 is the most economical yet feature-rich Wall Mount, high speed (2 x
300Mbps), high capacity Wireless Hotspot Gateway, targeting small-to-medium-sized
store owners who want to provide wireless Internet access services. The HSG326 is a
perfect choice for hotspot operation, in terms of cost-effectiveness, deployment time,
and user management.
This feature-rich product goes beyond what an operator could think of. Not only does it
come with two built-in access point compliant with IEEE 802.11 802.11b/g/n + a/n/ac
2 X 2 MIMO, it also offers an integrated billing system, including 10 billing templates
based on 4 billing alternatives, flexible means to authenticate customers, real-time
monitoring of current users, as well as customizable billing reports sent to an
administrators email boxes or FTP server periodically; designing an exclusive Web pages
that interact with the users is also possible, whether by means of external URLs, HTML
files, etc.
This Quick Installation Guide provides instructions and reference materials for getting
started with HSG326.
Package Contents 1. HSG326 x 1
2. Quick Installation Guide (QIG) x 1
3. Power Adapter (DC 12V) x 1
4. Mounting Screws x 2
5. Universal Mounting Panel x 1
6. Mounting Plate Lock Tool x 1
7. Detachable Antenna x 4
It is recommended to keep the original packing material for possible future shipment when repair or maintenance is required. Any returned product should be packed in its original packaging to prevent damage during delivery.
Quick Installation Guide HSG326 Wireless Hotspot Gateway ENGLISH
Copyright 4IPNET, INC. All rights reserved. 2
System Overview Lower Panel
HSG326 Lower Panel
Upper Panel
HSG326 Upper Panel
1 LAN 1 2 Ports Attach Ethernet cables here to connect to the wired local network.
2 Bypass RJ-45 pass-through port
3 DC Jack 12V 1 A Attach the power adaptor here.
1 Restart / Reset Button Press once to restart the system; Press and hold for more than 5 seconds to reset to factory default.
2 LED Indicators 4 LED lights. Representation is listed at the top of the panel.
Quick Installation Guide HSG326 Wireless Hotspot Gateway ENGLISH
Copyright 4IPNET, INC. All rights reserved. 3
Back Panel
HSG326 Back Panel
1 Uplink (PoE) Port For Uplink connection. This port can be used to connect to the internet. PoE is supported.
2 110 Punch-down Block (Pass-through) Copper wire punch down for wiring bypass.
3 110 Punch-down Block (Uplink PoE) Copper wire punch down for Uplink connection. This can be used to connect to the internet. PoE is supported.
4a SMA Connectors (2.4GHz) Connect external antennas for RF Card A here. (1) is the primary antenna connector while (2) is the secondary connector.
4b SMA Connectors (5GHz) Connect external antennas for RF Card B here. (1) is the primary antenna connector while (2) is the secondary connector.
Quick Installation Guide HSG326 Wireless Hotspot Gateway ENGLISH
Copyright 4IPNET, INC. All rights reserved. 4
Hardware Installation
Please follow the steps mentioned below to install the hardware of HSG326:
1. Place the HSG326 at a best location.
The best location for HSG326 is usually at the center of your wireless network. The HSG326
can be mounted on any wall outlets or on any flat surface;
Universal Mounting Panel
Secure the mounting plate on the mounting surface by tightening the screws (included) at the
highlighted area below:
a) Standard US Outlet box b) Standard EU Outlet box
Connect one end of the Ethernet cable to the Uplink port and the other end of the cable to a
switch, a router, or a hub; or use the 110 punch-down block as your uplink connection.
Quick Installation Guide HSG326 Wireless Hotspot Gateway ENGLISH
Copyright 4IPNET, INC. All rights reserved. 5
The 110 punch-down block may be connected with the following pin assignment:
Orange Blue White Orange White Blue Brown Green White Brown White Green
The HSG326 is now connected to your existing wired LAN network.
2. To supply power over to HSG326.
Connect the DC power adapter to the HSG326 power socket on the lower panel.
Please only use the power adapter supplied with the HSG326 package. Using a different power adapter may damage this system.
3. Connect HSG326 to your outbound network device.
Connect one end of the Ethernet cable to the Uplink port of HSG326 on the back panel.
Depending on the type of Internet service provided by your ISP, connect the other end of the
cable to the ATU-Router of an ADSL, a cable modem, a switch or a hub. The Uplink LED
indicator should be ON to indicate a proper connection.
4. Connect HSG326 to your network device.
Connect one end of the Ethernet cable to the LAN1 port of HSG326 on the lower panel.
Connect the other end of the cable to a PC for configuring the system.
Note: HSG326 has 1 + 4 service zones, the Default Service Zone is mapped to LAN1 and LAN2 port (192.168.1.254).
Quick Installation Guide HSG326 Wireless Hotspot Gateway ENGLISH
Copyright 4IPNET, INC. All rights reserved. 6
Connect one end of the Ethernet cable to the Uplink port and the other end of the cable to a switch, a router, or a hub.
Connect the HSG326 (LAN1 port) to your network device for configuring the system. *After login to the management UI, you can click on the Quick Start Guide button to start the configuration, or you can also consult the QIG and User Manual for detailed network setup instructions.
To verify the wired connection between HSG326 and your switch/router/hub, please check the LED status indication of these network devices.
Connect the HSG326 to a power source.
Quick Installation Guide HSG326 Wireless Hotspot Gateway ENGLISH
Copyright 4IPNET, INC. All rights reserved. 7
Getting Started
HSG326 supports web-based configuration. Upon the completion of hardware installation,
HSG326 can be configured through a PC by using its web browser with JavaScript enabled such
as Internet Explorer version 6.0.
Default LAN interface IP address:
LAN1 & LAN2 (192.168.1.254) are mapped to Default Service Zone for administrator usage.
Note: The instructions below are illustrated with the administrator PC connected to LAN1.
Steps:
1. Once the hardware installation is complete, set DHCP in TCP/IP settings of the administrator
PC to Obtain an IP address automatically. Connect the PC to the LAN1 Port of HSG326. An
IP address will be assigned to the PC automatically via the HSG326 built-in DHCP server.
2. Launch a web browser to access the web management interface of HSG326 by entering
https://192.168.1.254 or http://192.168.1.254 in the address field.
Note: https is used for a secured connection.
https://192.168.2.254/http://192.168.1.254/Quick Installation Guide HSG326 Wireless Hotspot Gateway ENGLISH
Copyright 4IPNET, INC. All rights reserved. 8
3. The following Administrator Login Page will then appear. Enter admin (the default value)
in the Username and Password fields, and then click Login to log in.
4. The first time login will force you to change the administrator password for security
purpose. Enter the Original Password, New Password and enter the new password again in
Verify Password to confirm the new password is correct. After change password success,
login again with the new password.
Quick Installation Guide HSG326 Wireless Hotspot Gateway ENGLISH
Copyright 4IPNET, INC. All rights reserved. 9
5. The Welcome Page will appear after a successful login.
Note: To logout, simply click Logout at the upper right hand corner of the interface to return to the Administrator Login Page.
Quick Installation Guide HSG326 Wireless Hotspot Gateway ENGLISH
Copyright 4IPNET, INC. All rights reserved. 10
< Quick Start Guide >
HSG326 provides a Quick Start Guide for quick configuration. To quickly configure HSG326 by
using the Quick Start Guide, click on the Quick Start Guide button to start the configuration
process.
Step 1. Time Zone
Please go to System > General > System Time.
Select an appropriate time zone from the Time Zone drop-down list box and enter the URL of
a valid NTP server to set up the system time.
HSG326 supports NTP time synchronization, please make sure the NTP server is reachable and alive.
Common Settings
Quick Installation Guide HSG326 Wireless Hotspot Gateway ENGLISH
Copyright 4IPNET, INC. All rights reserved. 11
Step 2. WAN Interfaces
Please go to System > WAN > WAN Configuration.
Select a proper type of Internet connection for WAN interface from the following three
available connections: Static, Dynamic, or PPPoE. Your ISP or network administrator can
advise on the connection type available to you. Below depicts an example for Static.
Step 3. Configure Service Zone Settings with ESSID
Please go to System > Service Zones.
Click the Link of the Service Zone Name you would like to configure.
Quick Installation Guide HSG326 Wireless Hotspot Gateway ENGLISH
Copyright 4IPNET, INC. All rights reserved. 12
Select Enable in Service Zone Status.
In Wireless Settings, select the RF cards you would like to use.
Enter a desired Service Zone ESSID for this Service Zone, it will apply to both RF cards.
Step 4: Configure Service Zone Settings with Authentication
Continuing from Step 3, in Authentication Settings, enable the authentication database under Authentication Options.
Quick Installation Guide HSG326 Wireless Hotspot Gateway ENGLISH
Copyright 4IPNET, INC. All rights reserved. 13
Click the Apply at the bottom of this page to save the settings.
Step 5: Add Local users
A new user can be added to the Local User database. Please go to Users > Internal Authentication > Local Authentication.
Click the Configure button of Local User List.
Quick Installation Guide HSG326 Wireless Hotspot Gateway ENGLISH
Copyright 4IPNET, INC. All rights reserved. 14
To add a user here, click the Add button
Enter the Username (e.g. testuser), Password (e.g. testuser), MAC Address (optional, to specify the valid MAC address of this user) and assign an applied Group to this particular user (or use the default).
Click the Apply at the bottom of this page to save the settings.
Step 6: Configure On-Demand user billing plan
On-Demand User allows you to configure different billing plans for different users. Please go to Users > Internal Authentication > On-Demand.
Quick Installation Guide HSG326 Wireless Hotspot Gateway ENGLISH
Copyright 4IPNET, INC. All rights reserved. 15
Click the Configure button of Billing Plans.
Now, you may configure the plans to your preference.
Quick Installation Guide HSG326 Wireless Hotspot Gateway ENGLISH
Copyright 4IPNET, INC. All rights reserved. 16
Click the Apply at the bottom of this page to save the settings.
Step 7: Configure Guest Authentication
Guest Authentication includes Social Media, such as Facebook, Google+, OpenID or Line, or registration by E-mail address.
Please go to Users > Internal Authentication > Guest.
For E-mail registration, select Visible in Guest Login Input.
For Social Media, select Enable in Social Media Login.
Configure the Guest Access Time, the default is Unlimited.
Quick Installation Guide HSG326 Wireless Hotspot Gateway ENGLISH
Copyright 4IPNET, INC. All rights reserved. 17
Click the Apply at the bottom of this page to save the settings.
Click the link of Social Media Login.
Check the desired Social Media Login check box and input the related settings.
Click the Apply at the bottom of this page to save the settings.
Step 8: Configure QoS Policy for User Group (Optional)
For each Authentication, it can be applied to different User Group. Different User Group can be assign with different Policy. Each Policy contain Firewall, Privilege, QoS, Specific Route and Prefer DHCP Pool, Bandwidth limitation (QoS) is shown here as an example.
Please go to Users > Policies > QoS.
Quick Installation Guide HSG326 Wireless Hotspot Gateway ENGLISH
Copyright 4IPNET, INC. All rights reserved. 18
In default, the Bandwidth Limitation on WAN is disabled, click the link and redirect to the
configuration page, enable the Bandwidth Limitation on WAN.
Click the Apply at the bottom of this page to save the settings.
Click Restart to take effect on all settings.
After restart success, login again with admin, go to Users > Policies > QoS again to
configure the QoS profile.
You may assign different uplink / downlink limit in different QoS profile here.
Quick Installation Guide HSG326 Wireless Hotspot Gateway ENGLISH
Copyright 4IPNET, INC. All rights reserved. 19
Click the Apply at the bottom of this page to save the settings.
It will apply the configured profile to a User Group configured in each Authentication Option.
Go to Users > Groups > Configuration
Assign with different Policy in different Service Zone in each User Group.
Click the Apply at the bottom of this page to save the settings.
Congratulations! Now, 4ipnet HSG326 is installed and configured successfully.
It is strongly recommended to make a backup copy of your configuration settings.
For further configuration and backup information, please refer to the Users Manual.
P/N : V10020160920
Copyright NoticeAll rights reserved.Recommended