View
1
Download
0
Category
Preview:
Citation preview
Errata
Title & Document Type:
Manual Part Number:
Revision Date:
HP References in this Manual This manual may contain references to HP or Hewlett-Packard. Please note that Hewlett-Packard's former test and measurement, semiconductor products and chemical analysis businesses are now part of Agilent Technologies. We have made no changes to this manual copy. The HP XXXX referred to in this document is now the Agilent XXXX. For example, model number HP8648A is now model number Agilent 8648A.
About this Manual We’ve added this manual to the Agilent website in an effort to help you support your product. This manual provides the best information we could find. It may be incomplete or contain dated information, and the scan quality may not be ideal. If we find a better copy in the future, we will add it to the Agilent website.
Support for Your Product Agilent no longer sells or supports this product. You will find any other available product information on the Agilent Test & Measurement website:
www.tm.agilent.com Search for the model number of this product, and the resulting product page will guide you to any available information. Our service centers may be able to perform calibration if no repair parts are needed, but no other support from Agilent is available.
HP 8663A SYNTHESIZED SIGNAL GENERATOR
Including Options 001, 002, 4% 003
Operation and Calibration Manual
SERIAL NUMBERS
This mmml applies d,iwtly to ktnunents with Eaial rur&.ers preflxe&
2234A to 2927A and all MAJOR changes that apply to your instrument
wv.12AUG91
For additional impmtant infomation abmt mid mmbm, refer to “DZTRLiiXTS CO\-ERED BY THIS MANUAL* in Section I.
Second Edition
This material may be reproduced by or for the tI,S, Cmwrnment pursuant to the Copyright License vr- der the clause at DFARS 52.227-7013 (APR 1966).
Copyrigh!@HEWLETT-PACKARD COMPANY 1982 EAST 24001 MISSION AVENUE, TAF G34, SPOKANE, WASHINGTON, U.S.A. 99220
K-!/a HEWLETT PACKARD
Documentation Update Service Packet
HP 8663A Operation and Calibration Manual
rev12 AUG91
HP 8663A SYNTHESIZED SIGNAL GENERATOR
Including Options 001, 002, & 003
Operation and Calibration Manual
SERIAL NUMBERS
Tb,is manual applies directly to instnnnents with erGI numbers prefixed;
2234A to 2927A and all MAJOR changes that apply to your instxumenL. i-w.12MAR90
For additional impox-tant information about swirl munbws, refer to “INSTRUMENTS COVERED BY THIS MANUAL” in Section 1.
Second Edition
This material may be reproduced by or for the US Government pursuant to the Copyright Liceme un. dw the clause at WARS 52.227-7013 W’R 19881.
Copyright@HEWLETT-PACKARD COMPANY 1962 EAST 24001 MISSION AVENUE, TAF C-34, SPOKANE, WASHINGTON, U.S.A. 99220
H.EWLETT PACKARD
Model 8663A
Section 1 GENERAL INFORMATION
l-l. INTRODUCTION
This manual contains information required to instill, operate, test, adjust, and service the Hewlett-Packard Model 8663A Signal Generator. The Model 8663A will generally be referred to as the signal generator throughout this manual.
The HP 8663A Operating and Service manual is composed of an Operation and Calibration Manual and a three volume service manual. The Operation and Calibration Manual contains the following sections:
1. General Information 2. Installation 3. Operation 4. Performance Tests 5. 4djustments
The Service Manual (Volumes 1, 2 and 3) contain the following Sections:
6. Replaceable Parts 7. Manual Changes 8. Service
The HP part number for the Operation and C&bra- tion Manual is shown cm the title page of this manwd. Part number for the Service Manual are shown on the title pages of Volumes 1, 2 and 3 of the Service Manual.
l-2. SPECl!=lCATlONS
Instrument specifications are listed in Table l-1. These specifications are the performance standards or limits against which the instrwoant can be tested. Supple- mental characteristics are not specifications but are typical characteristics included as additional informa- tion for the user.
l-3* SAFETY CONSIDERATIONS
This product is a Safety Class I instnnnent (provided with a protective earth terminal), The signal generator and all related doc”mentation must be reviewed for familiarization with safety markings and instructions before operation. Refer to the Safety Considerations page found at the beginning of this manual for a s”mmary of general safety information.
Safety information for installation and operation is fo”nd in appropriate places throughout this manual.
l-4. INSTRUMENTS COVERED BY MANUAL
4ttached to the instrument is a serial number plati. The serial number is in the form: OOOOAOOOOO. The serial number is composed of two parts; the first four digits and the letter are the serial number prefix and the last five digits are the suffix. The prefix is the same for all identical instnnnents; it changes only when a change is made to the instrwnent, The suffix, however, is assigned seq”entially and is different for each instrument. The contents of this manual apply to instnxnenta with the serial number prefix(w) listed unde? SERIAL NUMBERS on the title page.
Manual Updates. An instrument manufactured aftir the printing of this manual may have a serial prefix that is not listed on the title page. An unlisted serial prefix number indicates that the instrument differs in some way from those documented in this man”a1.
A “MANUAL UPDATES” packet is shipped with the man”a1 when neceswy tn provide yo” with the most current information available at the time of shipment. These packets consist of replacement and addition pages which should be incorporated into the rrmnual to bring it “p to date.
Hewlett-Packard offers a Document Wpdate Service that will provide you with f”rther updates as they become available.
If you operate or service instruments of different serial prefixes, we strongly recommend that you join this service immediately to ensure that your manual is kept current. For tnore information, refer to the Documentition Update Service reply card included with this manual or contact!
Technical Writing Department Spokane Division Hewlett-Packard Company East 24001 Mission - TAF C-34 Spokane, Washin@on, W.S.A. 99220 Telephone (509) 922.4001
Recommended