HIGH PRESSURE RANGE...0 50 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 For...

MAWP 7,500 PSIG (517.2 BARG) Metallic Head / 300 PSIG (20.7 BARG) PVC Head / 12,000 PSIG (827.6 BARG) HP Metallic Head / 1,000 lbf (4.45 kN) Rod Force / 0.75 in (19.05 mm) Stroke Length / Max Speed 100 SPM / 13.18:1 Gearbox Reduction / Motor Requirements: 1.0 HP (0.75 kW), Vertical / Available Frames: NEMA 56C with 7/8” shaft adapter, 143/145TC or IEC80B5. This performance curve was generated with empirical data, supersedes calculated or theoretical table data, and should be used to select an appropriate model. Curve valid for 1450 or 1750 RPM motor. Performance could vary slightly based on field conditions and actual motor speed. The metallic head version of this model features a modular head design that allows interchangeability with other plunger sizes with the appropriate parts. High pressure model pump heads are dedicated and do not accept other size plungers. Variator rated for use up to 131F (55C) ambient temperature.

Continuous Use Below Red Line Only

Pressure (PSIG)

Pressure (BARG)

*For discharge pressures above 7,500 psig, a high pressure head configuration is needed.

HIGH PRESSURE OPTION

100 SPM 1 HP (0.75kW) Motor

Minimum Flow Rate________________________________________0.024 USG/H (0.091 L/H) @ 10 SPM

Series FXA 1250 1/8'' PLUNGER Variator Controlwww.cppumps.com

sales@cppumps.com

HIGH PRESSURE

RANGE*

MAWP 7,500 PSIG (517.2 BARG) Metallic Head / 300 PSIG (20.7 BARG) PVC Head / 12,000 PSIG (827.6 BARG) HP Metallic Head / 1,000 lbf (4.45 kN) Rod Force / 0.75 in (19.05 mm) Stroke Length / Max Speed 100 SPM / 13.18:1 Gearbox Reduction / Motor Requirements: 1.0 HP (0.75 kW), Vertical / Available Frames: NEMA 56C with 7/8” shaft adapter, 143/145TC or IEC80B5. This performance curve was generated with empirical data, supersedes calculated or theoretical table data, and should be used to select an appropriate model. Curve valid for 1450 or 1750 RPM motor. Performance could vary slightly based on field conditions and actual motor speed. The metallic head version of this model features a modular head design that allows interchangeability with other plunger sizes with the appropriate parts. High pressure model pump heads are dedicated and do not accept other size plungers. Variator rated for use up to 131°F (55°C) ambient temperature.

HIGH PRESSURE OPTION

Continuous Use Below Red Line Only

Pressure (PSIG)

Pressure (BARG)

Series FXA 1250 3/16'' PLUNGERVariator Controlwww.cppumps.com

sales@cppumps.com

HIGH PRESSURE

RANGE*

MAWP 7,500 PSIG (517.2 BARG) Metallic Head / 300 PSIG (20.7 BARG) PVC Head / 12,000 PSIG (827.6 BARG) HP Metallic Head / 1,000 lbf (4.45 kN) Rod Force / 0.75 in (19.05 mm) Stroke Length / Max Speed 100 SPM / 13.18:1 Gearbox Reduction / Motor Requirements: 1.0 HP (0.75 kW), Vertical / Available Frames: NEMA 56C with 7/8” shaft adapter, 143/145TC or IEC80B5. This performance curve was generated with empirical data, supersedes calculated or theoretical table data, and should be used to select an appropriate model. Curve valid for 1450 or 1750 RPM motor. Performance could vary slightly based on field conditions and actual motor speed. The metallic head version of this model features a modular head design that allows interchangeability with other plunger sizes with the appropriate parts. High pressure model pump heads are dedicated and do not accept other size plungers. Variator rated for use up to 131°F (55°C) ambient temperature.

HIGH PRESSURE OPTIONPressure (PSIG)

Pressure (BARG)

HIGH PRESSURE

RANGE*

www.cppumps.comsales@cppumps.com

Series FXA 1250 1/4'' PLUNGERVariator Control

MAWP 7,500 PSIG (517.2 BARG) Metallic Head / 300 PSIG (20.7 BARG) PVC Head / 1,000 lbf (4.45 kN) Rod Force / 0.75 in (19.05 mm) Stroke Length / Max Speed 100 SPM / 13.18:1 Gearbox Reduction / Motor Requirements: 1.0 HP (0.75 kW), Vertical / Available Frames: NEMA 56C with 7/8” shaft adapter, 143/145TC or IEC80B5. This performance curve was generated with empirical data, supersedes calculated or theoretical table data, and should be used to select an appropriate model. Curve valid for 1450 or 1750 RPM motor. Performance could vary slightly based on field conditions and actual motor speed. The metallic head version of this model features a modular head design that allows interchangeability with other plunger sizes with the appropriate parts. Variator rated for use up to 131°F (55°C) ambient temperature.

Pressure (PSIG)

Pressure (BARG)

Pressure (PSIG)

Pressure (BARG)

Pressure (PSIG)

Pressure (BARG)

Series FXA 1500 3/8'' PLUNGER HPVariator Control

Pressure (PSIG)

Pressure (BARG)

Series FXA 1500 1/2'' PLUNGER HPVariator Control

0 25 50 75 100

Pressure (PSIG)

Pressure (BARG)

100 SPM 1 HP (0.75kW) Motor100 SPM 1 HP (0.75kW) Motor

0 10 20 30 40 50 60 80

Pressure (PSIG)

Pressure (BARG)

100 SPM 1 HP (0.75kW) Motor100 SPM 1 HP (0.75kW) Motor

Series FXA 1500 1'' PLUNGERVariator Control

MAWP 550 PSIG (37.9 BARG) Metallic Head / 300 PSIG (20.7 BARG) PVC Head / 1,000 lbf (4.45 kN) Rod Force / 0.75 in (19.05 mm) Stroke Length / Max Speed 100 SPM / 13.18:1 Gearbox Reduction / Motor Requirements: 1.0 HP (0.75 kW), Vertical / Available Frames: NEMA 56C with 7/8” shaft adapter, 143/145TC or IEC80B5. This performance curve was generated with empirical data, supersedes calculated or theoretical table data, and should be used to select an appropriate model. Curve valid for 1450 or 1750 RPM motor. Performance could vary slightly based on field conditions and actual motor speed. The metallic head version of this model features a modular head design that allows interchangeability with other plunger sizes with the appropriate parts. Variator rated for use up to 131°F (55°C) ambient temperature.

0 50 100

0 5 10 15 20 25 30 35

Pressure (PSIG)

Pressure (BARG)

Series FXA 1500 1.5'' PLUNGERVariator Control

100 SPM 1 HP (0.75kW) Motor100 SPM 1 HP (0.75kW) Motor100 SPM 1 HP (0.75kW) Motor

HIGH PRESSURE RANGE...0 50 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 For...

Documents

In Naval Applications · Duplex • Dual bowl, dual element • Rated Flow: 100 gpm • Operating Pressure: 3000 psig • Proof Pressure: 4500 psig • Rated Fatigue Pressure: 3000

Rosemount 385+ - InstrumartMaximum Pressure at Retraction or Insertion (ball valve version) 542 KPa abs (64 psig) Maximum Process Pressure and Temperature 790 KPa abs (100 psig) at

COMPRESSOR FOR PLASMA ATOMIZATION & … Manufacturing Feeder High Pressure Booster Systems 220 psig Series 5000 psig Series Industrial Rotary Screw Compressor Systems …

F.W. WEBB COMPANY · ASTM A197, Material. A153, Galvanizing Federal Spec: WWP 521 Pressure Ratings: 150 psig – Saturated Stream 175 psig 300 psig – At 150 Degrees W. O. G

IDEAS WITH POWER AND ENERGY - P2 InfoHouse · CryoFuels’ LPMRC Prototype • 85 gpd • 5 refrigerant system • 300 psig max refrigerant pressure • 50 psig process gas pressure

Torque - Pneumatic€¦ · Torque - Pneumatic Spring Return Actuator Actuator Model Imperial Unit Spring Torque lbf-in Operating Pressure,psig MinOP psig MOP psig 25 30 40 50 60 70

Bulletin: 299H Series - Emerson · Figure 1. 299H Series Pressure Reducing Regulators 299H Series Pressure Reducing Regulators • Inlet Pressure up to 175 psig / 12.1 bar

Line Pressure Regulators - ISTEC Corp · Line Pressure Regulators Outlet Pressure Set Point Operating Inlet Pressure 14” W.C. 1 PSIG 2 PSIG 30051

ES-401 Site-Specific RO Written Examination Form ES-401 ...2019/09/19 · 1A 820 psig 819 psig (817 psig) 1B 777 psig 774 psig 773 psig 1C 812 psig 810 psig 811 psig 1D 815 psig 814

Design an Optical Transducer for Pressure Measurement · Design an Optical Transducer for Pressure Measurement Ashraf Hamza1, ... are referred to as gauge pressure (psig) ... vacuum

P133 Pressure Regulator - Oceanic Controls · P133 Pressure Regulator 133L 133H Maximum Operating Inlet 60 PSIG 60 PSIG Maximum Emergency Inlet 125 PSIG 125 PSIG Maximum Operating

Fisher 3710 and 3720 Valve Positioners and 3722 Electro ......Supply Pressure(2) Recommended: 0.3 bar (5 psig) above actuator requirement Maximum: 10.3 bar (150 psig) or maximum pressure

ABSTRACT ---- - --- m------ · 1 hour, 23 min. 225°F 4 hours . 225'F . 11.5 days ' 115°F - 175°F to 281°F Pressure* 8 psig to 42 psig 27 psig 17 psig 17 psig 25 psig 8 Psig

Fleetguard NG5910 for Natural Gas ISG 12G Heavy Duty Engines · Technical Profile Value Normal Operating Pressure 100-150 psig Proof Pressure 250 psig Burst Pressure 600 psig Rated

Environmental Monitoring Report · Design Suction Pressure: 680 psig, Design Discharge Pressure: 1000 psig. It is quite some time that, HEC has completed construction, testing, pre-commissioning

EX1 - auracontrols.com Pages/ind_pages...EX1 Regulator, 1.8mm PCTFE Seat 500psigIN 1000psigIN 2000 psig IN 4500 psig IN EX1 Single Stage Pressure Reducing Regulator Technical Data

The LPG Pressure Ship Market - Epic GasEpic Borinquen 7,500 2016 Sasaki Epic Bonaire 7,500 2016 Sasaki Epic Baluan 7,500 2017 Sasaki Sub Total 14 Vessels 102,600 cbm Vessel: 5,000-6,300

1. - SCW Manufacturing · 2.1. BOILER Type “C” Style, low pressure boiler rated for 30 Psig water pressure or 15 Psig steam pressure (other pressures available). Supplied boiler

Series FXS Solar Injection System...1/8" Plunger Min Flow Rate: 0.34 [GPO] Max Pressure: 12,000 [PSIG] 3/16" Plunger Min Flow Rate: 0.78 Max Pressure: 7,500 [PSIG] 1/4" Plunger Min

Installation Guide Dual Pressure Control Type KPUfiles.danfoss.com/TechnicalInfo/Dila/01/DKRCC.PI.CD0.C3.02.pdf · Max. working pressure: LP side: 250 psig HP side KPU 15: 510 psig

HIGH PRESSURE RANGE*...0 50 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 *For...

HIGH PRESSURE RANGE...0 50 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 For...