View
0
Download
0
Category
Preview:
Citation preview
MADE IN
ITALY compliantITAR EAR FREE
COMPLIANT
REACH
CONNECTORSHDC
page_1FEB 2019 | www.cpeitalia.it All data and specifications are subject to change without notice.
COMPANY HISTORY AND NEW TARGETS .............................................................2
Table of Contents
HDC
Ways Plug Connectors
141
Receptacle Connectors
1179369
23.020.091-147 23.020.091-148
23.020.091-24323.020.091-245
23.020.091-247
23.020.091-24423.020.091-246
23.020.091-248
Page
17
37577797
28.004.122-892
28.004.122-89428.004.122-896
28.004.122-89828.004.122-243
28.007.122-89328.007.122-89528.007.122-89728.007.122-24428.007.122-899
Page
10 - 1110
16
28.004.172-900
28.004.172-902
28.007.122-90128.007.122-903
34+2
22+2
28.004.172-940
28.004.172-942
28.007.172-941
28.007.172-943
14 - 15
+Flex21 28.016.422-62928.018.422-630
CA28-629F01---------------------
16 - 176 28.004.172-944 28.007.172-945
18 - 19
Pcb
Cable (61+2+4) 28.004.172-946
(61+2+4) 28.004.172-948
(61+2+4) 28.007.172-947
(61+2+4) 28.007.172-949
Tecnical data informations .............................................................20
18 - 19
14 - 15
12 - 13
12 - 13
10 - 11
8 - 9
8 - 9
8 - 9 8 - 9 8 - 9
6 - 76 - 76 - 76 - 7
Company History and new TargetsCPE is a family company founded in 1978 and established in Milan, Italy.
The business started as a trading company of connectors and cables, addressing defense
and telecommunication.
After a few years of activity, moving from a trading to a manufacturing company was an organic and
natural progression, thus pursuing high specialization in harness assembly and connector production.
Since the spirit of CPE ITALIA has always been and always will be to assist the “client ally”, constant
growth was sustained by the founder of the company by opening new production sites all over the world.
CPE ITALIA is now a Group of about 400 people with production facilities in Brazil, China, Italy, Mexico,
Romania, branch o"ces in North America and India, headquarters in Milan.
With profound knowledge of and years of experience in multiple sectors like Defense, Broadcasting,
Communication Infrastructure, Medical, Transportation, Nuclear, Oceanographic Installations, CPE supports
its client-focused ideology with the development of solutions tailored to each client’s needs.
We like to imagine our behavior and capability results similar to these of the well known
“Tricolor Arrows” pilot team:
attentive to the rules
total security as top priority
amaze and engage
guidelines, organization and discipline
quality
Innovation and results that exceed customer expectations
page_3
OFL
FEB 2019 | www.cpeitalia.it All data and specifications are subject to change without notice.
40 YEARS INSIDE CONNECTIVITY MARKET
page_4
OFL
FEB 2019 | www.cpeitalia.it All data and specifications are subject to change without notice.
page_5
OFL
FEB 2019 | www.cpeitalia.it All data and specifications are subject to change without notice.
CMC & CMCC
MADE IN
ITALYcompliant ITAR EAR FREE
COMPLIANT
REACH
STANDARD
CONTACT
SPRING LOADED
CONTACT
HYPERBOLOID
CONTACT
RF COAXIAL PRECISION CABLE ASSEMBLIES
Cables harnesses with cable
No.503 Nan Hu Da Dao Nan Chang District, Wuxi City, Jiangsu Province
www.cpeitalia.it - info@cpeitalia.it
FIBER MANAGEMENT
SOLUTIONS
Company History and new Targets
CPE is a family company founded in 1978 and established in Milan, Italy.
The business started as trading company of connectors and cables, addressing defense,
and telecommunication.
After few years of activity It has been natural consequence moving from trading company
to manufacturing company, pursuing high specialization in harnesses assembly
and connectors production.
As the spirit of CPE ITALIA has always been - and still is - to be customer «allied», the founder
sustained the growth of the company by opening new production sites around the globe.
CPE ITALIA is now a Group of about 400 people with production facilities in Brazil, China, Italy, Mexico,
Romania, branch offices in North America and India, headquarters in Milan.
Extensive knowledge in sectors such as Defense, Broadcasting, Communication Infrastructure,
Medical, Transportation, Nuclear, Oceanographic Installations.
It is CPE main focus to support any Customer need by designing and developing tailored solutions
Customer Premises Network Termination (CPNT)
HDC
HDCHigh density connectors
with hyperboloid contact
Salt spray 48 hours
Black Chrome FinishingEIA-364-26
- 65 C to + 125 C
Temperature
Standard
operating
IP 68 according to
IEC 529
Metallic Shells
Stainless steel AISI316L
according with
ASTM A580
Insulator bodies
PPS with glass
type GST-40F
according with
SAE AMS 2700
Plug connectors
with turned contacts
diameter 0.4 mm
Receptacle connectors
with socket hyperbolid
contacts
according with
For PCBa
7 rows
page_7
HDC
FEB 2019 | www.cpeitalia.it All data and specifications are subject to change without notice.
Ways Plug Connectors ( contacts diam. 0,4mm)
141
Receptacle Connectors ( contacts diam. 0,4mm)
For more information contact CPE ITALIA, requesting technical product specification.
HDCHigh density connectors
with hyperboloid contact
For PCBa
7 rows
1179369
Example of 141 ways connectors
23.020.091-147 23.020.091-148
23.020.091-24323.020.091-245
23.020.091-247
23.020.091-24423.020.091-246
23.020.091-248
HDC
HDCHigh density connectors
Salt spray 48 hours
Black Chrome FinishingEIA-364-26
- 65 C to + 125 C
Temperature
Standard
operating
IP 68 according to
IEC 529
Metallic Shells
Stainless steel AISI316L
according with
ASTM A580
Insulator bodies
PPS with glass
type GST-40F
according with
SAE AMS 2700
Plug connectors
with turned contacts
diameter 0.4 mm
Receptacle connectors
with socket hyperbolid
contacts
according with
For PCBa
5 rows
with hyperboloid contact
page_9
HDC
FEB 2019 | www.cpeitalia.it All data and specifications are subject to change without notice.
Dimensions in mm
Ways Plug Connectors ( contacts diam. 0,4mm)
HDCHigh density connectors
For PCBa
5 rows
with hyperboloid contact
17
37577797
Receptacle Connectors ( contacts diam. 0,4mm)
28.004.122-892
28.004.122-89428.004.122-896
28.004.122-89828.004.122-243
28.007.122-89328.007.122-89528.007.122-89728.007.122-24428.007.122-899
For more information contact CPE ITALIA, requesting technical product specification.
HDC
HDCHigh density connectors
spring loaded contact
Salt spray 48 hours
EIA-364-26
- 55 C to + 125 C
Temperature
Standard
operating
IP 68 according to
IEC 529
Insulator bodies
PPS with glass
type GST-40F
according with
SAE AMS 2700
Contacts
Receptacle connectors
with spring loaded
or targhet contacts
according with
For PCBa
with
- 2 Amp
2 Amp
page_11
HDC
FEB 2019 | www.cpeitalia.it All data and specifications are subject to change without notice.
Ways Plug Connectors ( contacts diam. ) Receptacle Connectors ( contacts diam. )
For more information contact CPE ITALIA, requesting technical product specification.
Contacts 2 Amps
10
16
Example of 10 ways connectors
28.004.172-900
28.004.172-902
28.007.122-90128.007.122-903
HDCHigh density connectors
spring loaded contact
For PCBa
with
2 Amp
HDC
HDCHigh density connectors
spring loaded contact
Salt spray 48 hours
Black Chrome FinishingEIA-364-26
- 55 C to + 125 C
Temperature
Standard
operating
IP 68 according to
IEC 529
Metallic Shells
Stainless steel AISI316L
according with
ASTM A580
Insulator bodies
PPS with glass
type GST-40F
according with
SAE AMS 2700
Mix contacts
Receptacle connectors
with spring loaded
or targhet contacts
according with
For PCBa
with mix
- 1 Amp
- 3 Amp
1 and 3 amp
page_13
HDC
FEB 2019 | www.cpeitalia.it All data and specifications are subject to change without notice.
For more information contact CPE ITALIA, requesting technical product specification.
Mix Contacts 1 Amps and 3 Amps
Ways Plug Connectors ( contacts diam. ) Receptacle Connectors ( contacts diam. )
34+2
22+2
Example of 34 + 2 ways connectors
28.004.172-940
28.004.172-942
28.007.172-941
28.007.172-943
HDCHigh density connectors
spring loaded contact
For PCBa
with mix
1 and 3 amp
HDC
HDCHigh density connectors
spring loaded contact
Salt spray 48 hours
Black Chrome FinishingEIA-364-26
- 55 C to + 125 C
Temperature
Standard
operating
IP 68 according to
IEC 529
Metallic Shells
Stainless steel AISI316L
according with
ASTM A580
Insulator bodies
PPS with glass
type GST-40F
according with
SAE AMS 2700
Contacts
Receptacle connectors
with spring loaded
or targhet contacts
according with
3 row
2 Amp
Cable and Pcb
page_15
HDC
FEB 2019 | www.cpeitalia.it All data and specifications are subject to change without notice.
For more information contact CPE ITALIA, requesting technical product specification.
Ways Plug Connectors ( contacts diam. ) Receptacle Connectors ( contacts diam. )
21 + Flex
21
HDCHigh density connectors
spring loaded contact
3 row
Cable and Pcb
28.016.422-62928.018.422-630CA28-629F01---------------------
Example of 21 ways connectors
HDC
HDCHigh density connectors
spring loaded contact
Salt spray 48 hours
EIA-364-26
- 55 C to + 125 C
Temperature
Standard
operating
IP 68 according to
IEC 529
Insulator bodies
PPS with glass
type GST-40F
according with
SAE AMS 2700
Contacts
Receptacle connectors
with spring loaded
or targhet contacts
according with
1 row
2 Amp
Cable and Pcb
page_17
HDC
FEB 2019 | www.cpeitalia.it All data and specifications are subject to change without notice.
For more information contact CPE ITALIA, requesting technical product specification.
Ways Plug Connectors ( contacts diam. ) Receptacle Connectors ( contacts diam. )
HDCHigh density connectors
spring loaded contact
1 row
Cable and Pcb
6 28.004.172-944 28.007.172-945
HDC
HDCHigh density connectors
Salt spray 48 hours
Black Chrome FinishingEIA-364-26
- 55 C to + 125 C
Temperature
Standard
operating
IP 68 according to
IEC 529
Metallic Shells
Stainless steel AISI316L
according with
ASTM A580
Insulator bodies
PPS with glass
type GST-40F
according with
SAE AMS 2700
Mix contacts
Receptacle and plug
according with
with
Mix Signal - RF - Power
Contacts
connectorsFor
cable and Pcb
Size similar to a 100-way micro-d
Size similar to
100 ways micro-d
connectors
page_19
HDC
FEB 2019 | www.cpeitalia.it All data and specifications are subject to change without notice.
Mounting Type Plug Connectors Receptacle Connectors
For more information contact CPE ITALIA, requesting technical product specification.
HDCHigh density connectors
with
Mix Signal - RF - Power
Contacts
Mix Contacts 61 signal + 4 RF + 2 power
Pcb
Cable 28.004.172-946
28.004.172-948
28.007.172-947
28.007.172-949
page_20All data and specifi cations are subjected to change without any notice.GIU 2018 | www.cpeitalia.it
Applicable documents
- MIL-DTL-55302: “Connectors, Printed Circuit Subassembly and Accessories”
- ASTM B 488: “Standard Specification for Electrodeposited Coatings Gold for Engineering Uses”
- MIL-M-24519: “Molding Plastic Electrical Connectors”
- EIA-364: “Electrical Connector/Socket Test Procedures Including Environmental Classifications“
- ASTM-A-582: “Standard Specification for Free Machining Stainless Steel Bars”
- SAE- AMS2700E: “Passivation of Corrosion-Resistant Steels”
- ASTM-B-16: “Free Cutting Brass Rod, Bar and Shape for Use in Screw Machines”
- ASTM-B-139: “Standard Specification for Phosphor Bronze Rod, Bar and Shape”
- ASTM-B-196: “Standard Specification for Copper-Beryllium Alloy Rod and Bar”
- ASTM-B-197: “Standard Specification for Copper-Beryllium Alloy Wire”
- SAE-AMS-QQ-N-290: “Nickel Plating: Electrodeposited”
- IPC J-STD-006: “Requirement for Electronic Grade Solder Alloys and Fluxed and Non-Fluxed Solid Solder for Electronic Soldering Application”
HDCHigh density connectors
with hyperboloid contact
For PCBa
7 rows
HDCHigh density connectors
with hyperboloid contact
For PCBa
5 rows
HDC
page_21All data and specifi cations are subjected to change without any notice.GIU 2018 | www.cpeitalia.it
Requirements
HDCHigh density connectors
with hyperboloid contact
For PCBa
7 rows
HDCHigh density connectors
with hyperboloid contact
For PCBa
5 rows
Electrical Performance Requirements
- Insulation Resistance:Greater than 5000 MOhm at 500 VDC between any pair of contacts and any contact and the shell, according to EIA 364-21
- Dielectric Withstanding Voltage (at sea level):500Vrms @ 60 Hertz and 100Vrms @ 60 Hertz after humidity, according to EIA 364-20: the connector shall show no
- Low Level Contact Resistance:The resistance of a mated pair of contacts shall be 10 mOhm max, according to EIA-364-23
- Contact Current Capability:Mated contacts shall be able to carry a current equal to 1 A in continuous operation from -65°C to +125°C,
evidence of breakdown or flashover.
according to EIA-364-70
Mechanical Requirements- Contact Engagement and Separation Force:
29 g nominal, according to EIA-364-37
- Connector Mating and Unmating Force:The maximum mating and unmating force has a value equal to 35 g multiplied by the number of contacts,
- Contact Durability:Up to 5,000 cycles, < 2 mOhm change, according to EIA-364-9C
- Vibration (sine)Mated connectors shall not exhibit any discontinuities greater than 2 ns when tested in accordance with EIA-364-28,
- Shock (sawtooth)Mated connectors shall not exhibit any discontinuities greater than 2 ns when tested in accordance with EIA-364-27,
according to EIA-364-13. Mate connectors three times before initial measurements are taken
Test Condition III.
Test Condition G, sawtooth, peak acceleration 100 g, normal duration 6 ms. Connectors shall not be damaged and no loosening of parts shall occur.
HDC
page_22All data and specifi cations are subjected to change without any notice.GIU 2018 | www.cpeitalia.it
HDCHigh density connectors
with hyperboloid contact
For PCBa
7 rows
HDCHigh density connectors
with hyperboloid contact
For PCBa
5 rows
Requirements
Environmental Requirements
- Salt SprayThe mated connectors are tested according with EIA-364-26, test condition B, 48 hours. There shall be no peeling,
- Temperature rangeStandard operating temperature from -65 °C to +125 °C
- HumidityMated connectors will be subjected to humidity conditioning according with EIA-364-31, Test condition IV,
- IP ratingIP 68 according to IEC 529 mated and unmated
- SolderabilityThe solderability requirements of the PCB terminals shall be according with MIL-STD-202 method 208
- Resistance to soldering heatAccording with MIL-STD-202, method 210, condition C
chipping, or blistering of metal surfaces or exposure of base metal.
loading voltage 100 Vdc. The insulation resistance shall be greater than 1000 MOhm.
HDC
page_23All data and specifi cations are subjected to change without any notice.GIU 2018 | www.cpeitalia.it
HDCHigh density connectors
with hyperboloid contact
For PCBa
7 rows
HDCHigh density connectors
with hyperboloid contact
For PCBa
5 rows
Requirements
Materials and finishes- Connectors’MetallicShells
Stainless steel AISI 316L according with ASTM A580, black chrome finishing
- Connectors’ Insulator BodiesPolyphenylenesulphide (PPS), 40% glass filled type GST-40F as per MIL-M-24519.
- Sealing GasketSilicone Rubber 60 – 70 shore A per Mil Spec. ZZ-R-765 CL.
- 0.4 mm Straight Dip Solder Pin ( Tourned round contacts)Brass Alloy C36000 per ASTM B16-92, gold plated in accordance with ASTM B 488 Type II Class 1.27 (50 microinches minimum)
- 0.4 mm Straight Dip Solder Socket (Hyperboloid Contacts)1) Contact Wires:Beryllium Copper C17200 per ASTM B197/B197M-01, gold plated in accordance with ASTM B 488 Type II
2) Contact Tube:stainless steel per S30500 ASTM A 240 / A 240 M, passivate per ASTM-A967-05
3) Termination (Dip Solder):Brass Alloy C36000 per ASTM B16-92, gold plated in accordance with ASTM B 488 Type II
- MouldingStycast 2651-40 Epoxy Encapsulant-potting Black with catalyst 9
code C, over nickel underplate in accordance with SAE AMS-QQ-N-290, class 2, (30 – 150 microinches).
Class 1.27 (50 microinches minimum) code C, over nickel underplate in accordance with SAE AMS-QQ-N-290, class 2,(30 – 150 microinches).
Class 1.27 (50 microinches minimum) code C, over nickel underplate in accordance with SAE AMS-QQ-N-290, class 2, (30 – 150 microinches)
HDC
page_24All data and specifi cations are subjected to change without any notice.GIU 2018 | www.cpeitalia.it
Applicable documents
HDC
HDCHigh density connectors
spring loaded contact
For PCBa
with
- MIL-M-24519: “Molding Plastic Electrical Connectors”
- MIL-G-45204C: “Gold Plating, Electrodeposited”
- EIA-364: “Electrical Connector/Socket Test Procedures Including Environmental Classifications“
- ASTM-A-580: “Standard Specification for Stainless Steel wire”
- ASTM-A-967: “Standard Specification for Chemical Passivation Treatments for Stainless Steel parts”
- ASTM-B-16: “Free Cutting Brass Rod, Bar and Shape for Use in Screw Machines”
- ASTM-B-139: “Standard Specification for Phosphor Bronze Rod, Bar and Shape”
- ASTM-B-196: “Standard Specification for Copper-Beryllium Alloy Rod and Bar”
- ASTM-B-197: “Standard Specification for Copper-Beryllium Alloy Wire”
- ASTM-B-455: “Standard Specification for Copper-Zinc- Lead Alloy (Leaded Brass) Extruded Shapes”
- ASTM B 488: “Standard Specification for Electrodeposited Coatings Gold for Engineering Uses”
- ASTM B 734: “Standard Specification for Electrodeposited Copper for Engineering Uses”
- SAE-AMS-QQ-N-290: “Nickel Plating: Electrodeposited”
- IPC J-STD-006: “Requirement for Electronic Grade Solder Alloys and Fluxed and Non-Fluxed Solid Solder
- UL94: “Test Methods for Flammability Rating”
- IEC 529: “Degrees of Protection Provided by Enclosures (IP Code)”
- IEC 512: “Testing Procedures and Measurement Methods for Electrical Products”
for Electronic Soldering Application”
HDCHigh density connectors
spring loaded contact
For PCBa
with mix
1 and 3 amp
2 amp
HDCHigh density connectors
spring loaded contact
3 row
Cable and Pcb
HDCHigh density connectors
spring loaded contact
1 row
Cable and Pcb
page_25All data and specifi cations are subjected to change without any notice.GIU 2018 | www.cpeitalia.it
Electrical Performance Requirements- Insulation Resistance:
Greater than 5000 MOhm at 500 VDC between any pair of contacts, according to EIA 364-21
- Dielectric Withstanding Voltage (at sea level):500Vrms @ 60 Hertz and 100Vrms @ 60 Hertz after humidity, according to EIA 364-20: the connector shall show no
- Low Level Contact Resistance:The resistance of a mated pair of contacts shall be 10 mÙ max, according to EIA-364-23
- Contact Current Capability:
evidence of breakdown or flashover.
Mechanical Requirements- Connector Mating Force:
- Contact Durability:Up to 5,000 cycles, < 2 mÙ change, according to EIA-364-9C
- Vibration (sine)Mated connectors shall not exhibit any discontinuities greater than 1 ns when tested in accordance with EIA-364-28,
- Shock (sawtooth)Mated connectors shall not exhibit any discontinuities greater than 2 ns when tested in accordance with EIA-364-27,
Test Condition III.
Test Condition G, sawtooth, peak acceleration 100 g, normal duration 6 ms. Connectors shall not be damaged and no loosening of parts shall occur.
HDC
- Mated signal contacts shall be able to carry a current equal to 1 A in continuous operation from -55°C to +125°C,
according to EIA-364-70
- Mated signal contacts shall be able to carry a current equal to 2 A in continuous operation from -55°C to +125°C,
according to EIA-364-70
- Mated signal contacts shall be able to carry a current equal to 3 A in continuous operation from -55°C to +125°C,
according to EIA-364-70
The maximum mating force has a value equal to 1.1kg, according to EIA-364-13. Mate connectors three times before initial measurements are taken
HDCHigh density connectors
spring loaded contact
For PCBa
with
HDCHigh density connectors
spring loaded contact
For PCBa
with mix
1 and 3 amp
2 amp
HDCHigh density connectors
spring loaded contact
3 row
Cable and Pcb
HDCHigh density connectors
spring loaded contact
1 row
Cable and Pcb
Requirements
page_26All data and specifi cations are subjected to change without any notice.GIU 2018 | www.cpeitalia.it
Requirements
Environmental Requirements
- Salt SprayThe mated connectors are tested according with EIA-364-26, test condition B, 48 hours. There shall be no peeling,
- Temperature rangeStandard operating temperature from -55 °C to +125 °C
- HumidityMated connectors will be subjected to humidity conditioning according with EIA-364-31, Test condition IV,
- IP ratingIP 68 according to IEC 529 mated and unmated
- SolderabilityThe solderability requirements of the PCB terminals shall be according with MIL-STD-202 method 208
- Resistance to soldering heatAccording with MIL-STD-202, method 210, condition C
chipping, or blistering of metal surfaces or exposure of base metal.
loading voltage 100 Vdc. The insulation resistance shall be greater than 1000 MOhm.
HDC
HDCHigh density connectors
spring loaded contact
For PCBa
with
HDCHigh density connectors
spring loaded contact
For PCBa
with mix
1 and 3 amp
2 amp
HDCHigh density connectors
spring loaded contact
3 row
Cable and Pcb
HDCHigh density connectors
spring loaded contact
1 row
Cable and Pcb
page_27All data and specifi cations are subjected to change without any notice.GIU 2018 | www.cpeitalia.it
Requirements
Materials and finishes
- ConnectorsPolyphenylenesulphide (PPS), 40% glass filled type GST-40F as per MIL-M-24519.
- Sealing GasketSilicone Rubber 60 – 70 shore A per Mil Spec. ZZ-R-765 CL.
- MouldingStycast 2651-40 Epoxy Encapsulant-potting Black with catalyst 9
HDC
- Spring-loaded Pin for Pcb- Sleeve and Plunger: Brass Alloy per ASTM B 455 Alloy UNS38500, plated with Gold, 0.5 ìm, over Nickel, 2 ìm,
- Spring:
1) power pin: Stainless steel AISI 302 passivated as per ASTM A 967, plated with Gold, 0.25 ìm, over Nickel, 2 ìm,
2) signal pin: Berillium – Copper per ASTM B 197, plated with Gold, 0.25 ìm, over Nickel, 2 ìm, per SAE AMS-QQ-N-290, class1
per SAE AMS-QQ-N-290, class1
per SAE AMS-QQ-N-290, class1
- Target Pin for PcbBrass according to ASTM B 455, gold plated in accordance with ASTM B 488 Type II Class 1.27 (50 microinches minimum)code C, over nickel underplate in accordance with SAE AMS-QQ-N-290, class 2, (30 – 150 microinches).
- Threaded InsertStainless Steel, as per ASTM-A-582, passivated as per SAE-AMS-QQ-P-35
- Connectors’MetallicShells (only for 1 row and 2 amp)Stainless steel AISI 316L according with ASTM A580, black chrome finishing
HDCHigh density connectors
spring loaded contact
For PCBa
with
HDCHigh density connectors
spring loaded contact
For PCBa
with mix
1 and 3 amp
2 amp
HDCHigh density connectors
spring loaded contact
3 row
Cable and Pcb
HDCHigh density connectors
spring loaded contact
1 row
Cable and Pcb
page_28All data and specifi cations are subjected to change without any notice.GIU 2018 | www.cpeitalia.it
Applicable documents
HDC
- MIL-M-24519: “Molding Plastic Electrical Connectors”
- MIL-G-45204C: “Gold Plating, Electrodeposited”
- EIA-364: “Electrical Connector/Socket Test Procedures Including Environmental Classifications“
- ASTM-A-580: “Standard Specification for Stainless Steel wire”
- ASTM-A-967: “Standard Specification for Chemical Passivation Treatments for Stainless Steel parts”
- ASTM-B-16: “Free Cutting Brass Rod, Bar and Shape for Use in Screw Machines”
- ASTM-B-139: “Standard Specification for Phosphor Bronze Rod, Bar and Shape”
- ASTM-B-196: “Standard Specification for Copper-Beryllium Alloy Rod and Bar”
- ASTM-B-197: “Standard Specification for Copper-Beryllium Alloy Wire”
- ASTM-B-455: “Standard Specification for Copper-Zinc- Lead Alloy (Leaded Brass) Extruded Shapes”
- ASTM B 488: “Standard Specification for Electrodeposited Coatings Gold for Engineering Uses”
- ASTM B 734: “Standard Specification for Electrodeposited Copper for Engineering Uses”
- SAE-AMS-QQ-N-290: “Nickel Plating: Electrodeposited”
- IPC J-STD-006: “Requirement for Electronic Grade Solder Alloys and Fluxed and Non-Fluxed Solid Solder
- UL94: “Test Methods for Flammability Rating”
- IEC 529: “Degrees of Protection Provided by Enclosures (IP Code)”
- IEC 512: “Testing Procedures and Measurement Methods for Electrical Products”
for Electronic Soldering Application”
HDCHigh density connectors
with
Mix Signal - RF - Power
Contacts
page_29All data and specifi cations are subjected to change without any notice.GIU 2018 | www.cpeitalia.it
Requirements
Electrical Performance Requirements- Insulation Resistance:
Greater than 5000 MOhm at 500 VDC between any pair of contacts, according to EIA 364-21
- Dielectric Withstanding Voltage (at sea level):500Vrms @ 60 Hertz and 100Vrms @ 60 Hertz after humidity, according to EIA 364-20: the connector shall show no
- Low Level Contact Resistance:The resistance of a mated pair of contacts shall be 10 mÙ max, according to EIA-364-23
- Contact Current Capability:
evidence of breakdown or flashover.
Mechanical Requirements- Connector Mating Force:
- Contact Durability:Up to 5,000 cycles, < 2 mÙ change, according to EIA-364-9C
- Vibration (sine)Mated connectors shall not exhibit any discontinuities greater than 1 ns when tested in accordance with EIA-364-28,
- Shock (sawtooth)Mated connectors shall not exhibit any discontinuities greater than 2 ns when tested in accordance with EIA-364-27,
Test Condition III.
Test Condition G, sawtooth, peak acceleration 100 g, normal duration 6 ms. Connectors shall not be damaged and no loosening of parts shall occur.
HDC
- Mated signal contacts shall be able to carry a current equal to 1 A in continuous operation from -55°C to +125°C,
according to EIA-364-70
- Mated signal contacts shall be able to carry a current equal to 4,5 A in continuous operation from -55°C to +125°C,
according to EIA-364-70
The maximum mating force has a value equal to 1.1kg, according to EIA-364-13. Mate connectors three times before initial measurements are taken
- Contact RF frequency:- Mated RFl contacts shall be able frequency 6 Ghz at 50 Ohm operation from -55°C to +125°C,
HDCHigh density connectors
with
Mix Signal - RF - Power
Contacts
page_30All data and specifi cations are subjected to change without any notice.GIU 2018 | www.cpeitalia.it
Requirements
Environmental Requirements
- Salt SprayThe mated connectors are tested according with EIA-364-26, test condition B, 48 hours. There shall be no peeling,
- Temperature rangeStandard operating temperature from -55 °C to +125 °C
- HumidityMated connectors will be subjected to humidity conditioning according with EIA-364-31, Test condition IV,
- IP ratingIP 68 according to IEC 529 mated and unmated
- SolderabilityThe solderability requirements of the PCB terminals shall be according with MIL-STD-202 method 208
- Resistance to soldering heatAccording with MIL-STD-202, method 210, condition C
chipping, or blistering of metal surfaces or exposure of base metal.
loading voltage 100 Vdc. The insulation resistance shall be greater than 1000 MOhm.
HDC
HDCHigh density connectors
with
Mix Signal - RF - Power
Contacts
page_31All data and specifi cations are subjected to change without any notice.GIU 2018 | www.cpeitalia.it
Requirements
Materials and finishes
- ConnectorsPolyphenylenesulphide (PPS), 40% glass filled type GST-40F as per MIL-M-24519.
- Sealing GasketSilicone Rubber 60 – 70 shore A per Mil Spec. ZZ-R-765 CL.
- MouldingStycast 2651-40 Epoxy Encapsulant-potting Black with catalyst 9
HDC
- Threaded InsertStainless Steel, as per ASTM-A-582, passivated as per SAE-AMS-QQ-P-35
- 0.4 mm Straight Dip solder or solder cup Pin ( Tourned round contacts)Brass Alloy C36000 per ASTM B16-92, gold plated in accordance with ASTM B 488 Type II Class 1.27 (50 microinches minimum)
- 0.4 mm Straight Dip Solder or solder cup Socket (Hyperboloid Contacts)1) Contact Wires:Beryllium Copper C17200 per ASTM B197/B197M-01, gold plated in accordance with ASTM B 488 Type II
2) Contact Tube:stainless steel per S30500 ASTM A 240 / A 240 M, passivate per ASTM-A967-05
3) Termination (Dip Solder):Brass Alloy C36000 per ASTM B16-92, gold plated in accordance with ASTM B 488 Type II
code C, over nickel underplate in accordance with SAE AMS-QQ-N-290, class 2, (30 – 150 microinches).
Class 1.27 (50 microinches minimum) code C, over nickel underplate in accordance with SAE AMS-QQ-N-290, class 2,(30 – 150 microinches).
Class 1.27 (50 microinches minimum) code C, over nickel underplate in accordance with SAE AMS-QQ-N-290, class 2, (30 – 150 microinches)
- 0.7 mm Straight Dip Solder or solder cup Pin ( Tourned round contacts)Brass Alloy C36000 per ASTM B16-92, gold plated in accordance with ASTM B 488 Type II Class 1.27 (50 microinches minimum)
- 0.7 mm Straight Dip Solder or solder cup Socket (Hyperboloid Contacts)1) Contact Wires:Beryllium Copper C17200 per ASTM B197/B197M-01, gold plated in accordance with ASTM B 488 Type II
2) Contact Tube:stainless steel per S30500 ASTM A 240 / A 240 M, passivate per ASTM-A967-05
3) Termination (Dip Solder):Brass Alloy C36000 per ASTM B16-92, gold plated in accordance with ASTM B 488 Type II
code C, over nickel underplate in accordance with SAE AMS-QQ-N-290, class 2, (30 – 150 microinches).
Class 1.27 (50 microinches minimum) code C, over nickel underplate in accordance with SAE AMS-QQ-N-290, class 2,(30 – 150 microinches).
Class 1.27 (50 microinches minimum) code C, over nickel underplate in accordance with SAE AMS-QQ-N-290, class 2, (30 – 150 microinches)
- Rf contact crimp socket
- Rf contact crimp plug
HDCHigh density connectors
with
Mix Signal - RF - Power
Contacts
CPE WORLDWIDE
CPE ITALIA SPA (HEADQUARTER)
Via Chiasserini, 15 - 20157 MILANO - Italy
5000 S.M.
Tel. +39.02.390961 - Fax. +39.02.3570765 - +39.02.3570774
Email: Info@cpeitalia.it
www.cpeitalia.it
CPE East Europe
Str. Aleea Crinului, 11 - Slatioara - Romania
4000 S.M.
Email: sciarra@cpeitalia.it
CPE Electronica México
Carretera Apizaco-Tlaxco, Lote 1, Manzana 4, Ciudad Industrial Xicohtencatl 3
2000 S.M.
C.P. 90250, Tlaxco, Tlaxcala
Email: mario.anas@cpemexico.mx
Zhenjiang CPE Electronics Co. Ltd.
Xindingmao ind. Park in new district
1800 S.M.
212000 Zhenjiang city China
CPE ITALIA SPA (Production Plant)
Via Torre Lupara Zona Industriale - 81050 PASTORANO (CE) - Italy
3000 S.M.
Email: rocco@cpeitalia.it
CPE do Brasil
Rua Inaja, 698 - BR83.324.050 Vila E. Perneta -
2500 S.M.
Curitiba (Pinhais-PR) - Brasil
Email contact: vendas@cpedobrasil.com.br
Wuxi CPE Electronics Co. Ltd
No.503 Nan Hu Da Dao Nan Chang District, Wuxi City, Jiangsu Province
4500 S.M.
214124 Wuxi City - P.R. China
Email contact: info@cpeitalia.cn
Commercial O#ces
BANGALORE – INDIA
(Mr. Sanjay – Email contact: sanjay@rohan-enterprises.com)
HYDERABAD – INDIA
(Mr. Mohan - Email contact: mohan@rohan-enterprises.com)
TEXAS - U.S.A.
(Mr. Swinger - Email contact: je" @cpe-nar.com)
www.cpeitalia.it - info@cpeitalia.itEd.02/2019 v.0
Recommended