View
0
Download
0
Category
Preview:
Citation preview
Africa’s leading steel supplier
INSTALLATION MANUALHARVEYTILE
Tel: +27 11 741 5600 I Fax: +27 11 813 3639 I www.harveyroofingproducts.co.za I www.macsteel.co.zaTel: +27 11 741 5
Africa’s leading steel supplier
PRODUCT RANGE
Tile Specification (Approx.)
Overall Length: 1675 mmCover: 1600 mmOverall Width: 397 mmCover: 369 mmMass per tile: 3,9 kgMass per sq. metre: 6,6 kgNo. of tiles per sq. metre: 1,69
Elitetile
Tile Specification (Approx.)
Overall Length: 1675 mmCover: 1600 mmOverall Width: 397 mmCover: 369 mmMass per tile: 3,9 kgMass per sq. metre: 6,6 kgNo. of tiles per sq. metre: 1,69
Tufftile
Tile Specification
Overall Length: 1675 mmCover: 1 625 mmOverall Width: 395 mmCover: 350 mmMass per tile: 4,2 kgMass per sq. metre: 6,9 kgNo. of tiles per sq. metre: 1,69
HarveyThatch & Shaketile
Africa’s leading steel supplier
INDEX
Africa’s leading steel supplier
TIMBER REQUIREMENTS
1
Africa’s leading steel supplier
TILING IN GENERAL
2
Africa’s leading steel supplier
GENERAL FIXING PROCEDURES
3
Africa’s leading steel supplier
RIDGE DETAILS
4
Africa’s leading steel supplier
FLASHING DETAILS
5
Africa’s leading steel supplier
GABLE END DETAILS
6
Africa’s leading steel supplier
VALLEY DETAILS MANSARD DETAILS
7
Africa’s leading steel supplier
HIP DETAILS
8
Africa’s leading steel supplier
ESTIMATING DATA
The following is based on standard information.All roofs vary so clients ust take special care whilst calculating quantities.
Tile Calculator for Sharktile and Thatch Tiles
Tile Calculator for Elite and Tuff Tiles
9
HIP DETAILS
Africa’s leading steel supplier10
Africa’s leading steel supplier
RE-ROOFING
11
Africa’s leading steel supplier12
COLOUR RANGE
Available on request. Minimum quantities are applicable
Left and right hand serrated. Fixed tobarge boards at gable ends. Sketchshows right handed barge board cover.
Length: 1550mm Height: 130mmcover 4 tile courses Mass: 2.3kg
Left and right handed serrated.Sketch shows right handed sidewall.
Length: 1550mm Height: 115mmcover 4 tile courses Mass: 2.4kgWidth: 170mm Upper Lip: 10mm
For use at headwall and sidewall flashingas well as for short courses at ridge.
Length: 1720mm Upper Lip: 25mmCover: 1600mm Mass: 2.5kgWidth: 240mm
Fixed to double batten at apexLength: 1720mm (cover 1600mm)Width: 125mm tapered lengthwiseHeight: 95mmMass: 2.5kg
Fixed to double batten at hip battensLength: 580mm (cover 1 per tile course)Width: 125mm tapered down to 123mmHeight: 75mm tapered up to 105mm
Fixed to double batten at apexLength: 1720mm (cover 1600mm)Width: 48mm tapered lengthwiseHeight: 70mmMass: 1.8kg
Fixed to single hip battenLength: 580mm (cover 1 per tile course)Width: 48mm tapered down to 45mmHeight: 42mm tapered up to 70mmMass: 0.5kg
Fixed to gable endsLength: 1720mm (cover 1600mm)Width: 60mmHeight: 68mm tapered upMass: 1.8kg
Length: 395mmWidth: 170mmMass: 0.6kgCover: 370mm
Africa’s leading steel supplier
Recommended