View
214
Download
0
Category
Preview:
Citation preview
7/29/2019 Harris Platinum Frame and System Edition
1/453
Wideband Digital Multirate Routing SwitchersFrames and Modules
Installation, Configuration, and Operation Manual
Edition T
PT-FR MAN
7/29/2019 Harris Platinum Frame and System Edition
2/453
7/29/2019 Harris Platinum Frame and System Edition
3/453
PlatinumWideband Digital MultirateRouting Switchers Frames andModules
Installation, Configuration, andOperation Manual
Edition T
November 2011
7/29/2019 Harris Platinum Frame and System Edition
4/453
Harris CorporationBroadcast CommunicationsDivision4393 Digital WayMason, OH USA 45040
Copyright 2006-2011 Harris Corporation, 1025 West NASA Boulevard, Melbourne, Florida32919-0001 U.S.A. All rights reserved. This publication supersedes all previous releases. No part of thisdocumentation may be reproduced in any form or by any means or used to make any derivative workwithout permission from Harris Corporation.
Harris Corporation reserves the right to revise this documentation and to make changes in content from
time to time without obligation on the part of Harris Corporation to provide notification of suchrevision or change.
UNITED STATES GOVERNMENT LEGEND If you are a United States government agency, then thisdocumentation and the software described herein are provided to you subject to the following:
All technical data and computer software are commercial in nature and developed solely at privateexpense. Software is delivered as Commercial Computer Software as defined in DFARS252.227-7014 (June 1995) or as a commercial item as defined in FAR 2.101(a) and as such isprovided with only such rights as are provided by Harris standard commercial license for the Software.Technical data is provided with limited rights only as provided in DFAR 252.227-7015 (Nov 1995) or FAR52.227-14 (June 1987), whichever is applicable. You agree not to remove or deface any portion of anylegend provided on any licensed program or documentation contained in, or delivered to you inconjunction with, this User Guide.
This publication, or any part thereof, may not be reproduced in any form, by any method, for anypurpose, without the written consent of Harris Corporation.
Contact Harris Corporation for permission to use materials as well as guidelines concerning foreignlanguage translation and publication.
Harris Corporation reserves the right to revise and improve its products as it chooses. This publication isdesigned to assist in the use of the product, as it exists on the date of publication of this manual, andmay not reflect the product at the current time or an unknown time in the future. This publication doesnot in any way warrant description accuracy or guarantee the use for the product to which it refers.
The Harris logo and assured communications are registered trademarks of Harris Corporation. D-Seriesis a trademark of Harris Corporation. All other trademarks are held by their respective owners.
This user guide was created for Platinum Routing Switchers, Edition T.
Windows is a registered trademark of Microsoft Corporation. AMD and Operton are trademarks ofAdvanced Micro Devices, Inc. Dolby Digital is a registered trademark of Dolby Laboratories.
All other trademarks are the property of their respective holders.
Publication Date: November 2011
7/29/2019 Harris Platinum Frame and System Edition
5/453
iii
Copyright 2006-2011, Harris Corporation
Contents
About This Manual ................................................................................................xvAudience ...................................................................................................................xv
Revision History .........................................................................................................xv
Writing Conventions ............................................................................................... xvii
Obtaining Documents .............................................................................................xvii
Applications ............................................................................................................... xviii
Unpacking/Shipping Information ...............................................................................xix
Unpacking a Platinum Product .................................................................................xix
Returning a Platinum Product ...................................................................................xix
Standards ......................................................................................................................xx
Platinum Product Standards ......................................................................................xx
EMC Compliance Standards .....................................................................................xxi
Restriction on Hazardous Substances (RoHS) Compliance .........................................xxi
Waste from Electrical and Electronic Equipment (WEEE) Compliance .......................xxii
Safety Standards .................................................................................................... xxiii
Safety Information ..................................................................................................... xxiii
Safety Terms and Symbols in this Manual ............................................................... xxiv
Chapter 1 Introduction ..............................................................................................................1Product Description .......................................................................................................1
Main Features ................................................................................................................2
Frame Architecture ........................................................................................................3
Frame Matrix Functional Arrangement .....................................................................10
Frame-Specific Components .....................................................................................10
Module-Specific Components ..................................................................................11
Front Panel LED Indicators ...........................................................................................15Control Features ..........................................................................................................17
Physical.....................................................................................................................17
Parametric ................................................................................................................17
Signal .......................................................................................................................17
CCS Control System Integration Requirements .........................................................18
Real-time Requirements ...........................................................................................18
7/29/2019 Harris Platinum Frame and System Edition
6/453
Contentsiv
Copyright 2006-2011, Harris Corporation
Applications Integration ...........................................................................................18
Frame Specifications.....................................................................................................21
Chapter 2 Frame Modules .......................................................................................................23
PM-MI-5/PM-MI-9/PT-MI-15/PT-MI-28 Module Interconnect ....................................23Operation ................................................................................................................23
Installation ...............................................................................................................24
Configuration ..........................................................................................................24
PM5-CBP/PT-CBP: Communications Back Panel Module ...........................................24
Operation ................................................................................................................24
Installation ...............................................................................................................27
Configuration ..........................................................................................................27
PT-RES: Platinum Resource Module ............................................................................27
Operation ................................................................................................................27
Installation ...............................................................................................................28
Configuration ..........................................................................................................28PM-ALARM-5: Alarm Module for 5RU Frames ...........................................................29
Operation ................................................................................................................29
Pinout Diagram ........................................................................................................31
Installation ...............................................................................................................32
Configuration ..........................................................................................................32
Controllable Parameters ...........................................................................................32
PT-ALARM: Alarm Module for 9RU, 15RU, and 28RU Frames ..................................34
Operation ................................................................................................................34
Pinout Diagram ........................................................................................................36
Installation ...............................................................................................................36
Configuration ..........................................................................................................36Controllable Parameters ...........................................................................................36
PT-PS: AC Power Supply ModulePT-PS-DC: DC Power Supply Module
Operation ................................................................................................................38
Installation ...............................................................................................................39
Configuration ..........................................................................................................39
Specifications ...........................................................................................................39
PM5-PD/PT-PD: Power Distribution Module ..............................................................41
Operation ................................................................................................................41
Installation ...............................................................................................................42
Configuration ..........................................................................................................42PT-EXPS: External Power Supply Frame .....................................................................43
Operation ................................................................................................................43
Installation ...............................................................................................................43
Configuration ..........................................................................................................44
Connecting External Power Supplies ........................................................................44
PM-FAN-5: 5RU Frame Fan Modules ...........................................................................46
7/29/2019 Harris Platinum Frame and System Edition
7/453
Platinum Frames and ModulesInstallation, Configuration, and Operation Manual
v
Copyright 2006-2011, Harris Corporation
Operation ................................................................................................................46
Installation ...............................................................................................................47
Configuration ..........................................................................................................47
PM-FAN-8/PT-FAN-14/PT-FAN-16: 9RU, 15RU, and 28RU Frame Fan Modules ........48
Operation ................................................................................................................48
Installation ...............................................................................................................48
Configuration ..........................................................................................................48
PT-SYNC: Sync Module ................................................................................................49
Operation ................................................................................................................49
Installation ...............................................................................................................51
Configuration ..........................................................................................................51
Controllable Parameters ...........................................................................................51
Functional Block Diagram .........................................................................................52
Specifications ...........................................................................................................52
PT-SYNC-MI: Sync Module Interconnect Module ......................................................53
Operation ................................................................................................................53
Installation ...............................................................................................................53
Configuration ..........................................................................................................53
Chapter 3 Input Modules ........................................................................................................55Input Module General Description .............................................................................56
Control Requirements ..............................................................................................57
Applications Integration ...........................................................................................57
Controllable Parameters List .....................................................................................58
Submodules .............................................................................................................58
PM-HS-IB+/PT-HS-IB+: Digital Multirate Input Modules ...........................................59
Operation ................................................................................................................59Installation ...............................................................................................................60
Configuration ..........................................................................................................60
Controllable Parameters ...........................................................................................60
Functional Block Diagram .........................................................................................62
Specifications ...........................................................................................................63
PM-HS-IB/PT-HS-IB: Digital Multirate Input Modules ...............................................63
Operation ................................................................................................................63
Installation ...............................................................................................................64
Configuration ..........................................................................................................65
Controllable Parameters ...........................................................................................65
Functional Block Diagram .........................................................................................66Specifications ...........................................................................................................66
PM-S-IB+/PT-S-IB+: Digital Multirate Input Modules ................................................67
Operation ................................................................................................................67
Installation ...............................................................................................................68
Configuration ..........................................................................................................68
Controllable Parameters ...........................................................................................68
7/29/2019 Harris Platinum Frame and System Edition
8/453
Contentsvi
Copyright 2006-2011, Harris Corporation
Functional Block Diagram .........................................................................................70
Specifications ...........................................................................................................71
PM-S-IB/PT-S-IB: Digital Multirate Input Modules .....................................................71
Operation ................................................................................................................71
Installation ...............................................................................................................72
Configuration ..........................................................................................................72
Controllable Parameters ...........................................................................................72
Functional Block Diagram .........................................................................................73
Specifications ...........................................................................................................74
PM-AEB-IB/PT-AEB-IB: AES Balanced Input ModulesPM-AEC-IB/PT-AEC-IB: AES Coaxial Input Modules
Operation ................................................................................................................75
Installation ...............................................................................................................76
Configuration ..........................................................................................................77
Controllable Parameters ...........................................................................................77
Functional Block Diagram .........................................................................................78
Pinout Diagram ........................................................................................................79
Specifications ...........................................................................................................80
PM-AEBT-IB/PT-AEBT-IB: AES Balanced Input Modules with TDM CapabilityPM-AECT-IB/PT-AECT-IB: AES Coaxial Input Modules with TDM Capability
Operation ................................................................................................................82
Installation ...............................................................................................................83
Configuration ..........................................................................................................84
Controllable Parameters ...........................................................................................84
Functional Block Diagram .........................................................................................86
Pinout Diagram ........................................................................................................86
Specifications ...........................................................................................................87
PM-DEC-IB/PT-DEC-IB: Analog Video to SDI Decoder Input Modules ......................90
Operation ................................................................................................................90Installation ...............................................................................................................92
Configuration ..........................................................................................................92
Controllable Parameters ...........................................................................................92
Functional Block Diagram .........................................................................................94
Specifications ...........................................................................................................95
PM-ADC-IB/PT-ADC-IB: Audio A/D Input Modules ....................................................96
Operation ................................................................................................................96
Installation ...............................................................................................................99
Configuration ..........................................................................................................99
Controllable Parameters ...........................................................................................99
Functional Block Diagram .......................................................................................102
Pinout Diagram ......................................................................................................103
Specifications .........................................................................................................103
PM-ADCT-IB/PT-ADCT-IB: Audio A/D Input Modules with TDM Capability ..........106
Operation ..............................................................................................................106
Installation .............................................................................................................109
Configuration ........................................................................................................109
7/29/2019 Harris Platinum Frame and System Edition
9/453
Platinum Frames and ModulesInstallation, Configuration, and Operation Manual
vii
Copyright 2006-2011, Harris Corporation
Controllable Parameters .........................................................................................109
Functional Block Diagram .......................................................................................113
Pinout Diagram ......................................................................................................114
Specifications .........................................................................................................114
PT-HS1310S-IB: Fiber Optical HD/SD Serial Video Receiver Modules ....................116
Operation ..............................................................................................................116
Installation .............................................................................................................117
Configuration ........................................................................................................117
Controllable Parameters .........................................................................................118
Functional Block Diagram .......................................................................................119
Specifications .........................................................................................................119
PT-HSO-IB+: Fiber Optical 3G HD-SDI, 1.5G HD-SDI, andSD-SDI Serial Video Receiver Modules .....................................................................120
Operation ..............................................................................................................120
Installation .............................................................................................................121
Configuration ........................................................................................................122
Controllable Parameters .........................................................................................122
SFP Specifications ...................................................................................................123
Functional Block Diagram .......................................................................................125
Specifications .........................................................................................................126
PT-DMX-3G: SDI Audio De-Embedder Submodule with 3 Gb/s CapabilityPT-DMX: SDI Audio De-Embedder Submodule with1.5 HD-SDI and SD-SDI Capability
Operation ..............................................................................................................127
Installation .............................................................................................................129
Configuration ........................................................................................................129
Controllable Parameters .........................................................................................129
Functional Block Diagram .......................................................................................134
Specifications .........................................................................................................134PT-FSDMX-IBG and PT-FSDMXO-IBG Frame Synchronizer and Demultiplexing InputModules .....................................................................................................................135
Power-Up sequence ................................................................................................136
Firmware Upgrade and Backup Image.....................................................................137
Activating PT-FSDMX Functions...............................................................................137
Controllable Parameters .........................................................................................144
Functional Block Diagram .......................................................................................152
LED Indicators .........................................................................................................152
Specifications .........................................................................................................153
PT-HSR8C1D-IBG and PT-HSR1D-IBG Digital Multirate Matrix Expansion Input and
Receiver Modules ......................................................................................................155Operation ..............................................................................................................155
PT-HSR8C1D-IBG Input Module .............................................................................155
PT-HSR1D-IBG Input Module ..................................................................................156
Input Expansion .....................................................................................................156
Installation .............................................................................................................157
Configuration ........................................................................................................157
7/29/2019 Harris Platinum Frame and System Edition
10/453
Contentsviii
Copyright 2006-2011, Harris Corporation
Controllable Parameters .........................................................................................158
Functional Block Diagram .......................................................................................161
Specifications .........................................................................................................162
LED Indicators ........................................................................................................162
PT-MADI4C-IBG - Platinum Multichannel Audio Digital Interface (MADI) Input Mod-ule ...............................................................................................................................163
MADI Input Module (PT-MADI4C-IBG) ...................................................................164Controlling the MADI Input Module through Navigator ..........................................165
MADI Presence ......................................................................................................167
TDM Mapping .......................................................................................................167
Sample MADI to TDM Mapping Scenarios ..............................................................168
Specifications .........................................................................................................172
Power Consumption ..............................................................................................172
PT-MADI4C-IBG Parameters ...................................................................................172
Chapter 4 Output Modules ...................................................................................................175Output Module General Description ........................................................................177
Controllable Parameters Lists .................................................................................178
Submodules............................................................................................................179
Signal Flow Diagram ..............................................................................................180
PM-HSR-OBG+/PT-HSR-OBG+: HD-SDI/SD-SDI with Reclocking Output Modules 181
Operation ..............................................................................................................181
Installation .............................................................................................................183
Configuration ........................................................................................................183
Controllable Parameters .........................................................................................183
Functional Block Diagram .......................................................................................185
Specifications .........................................................................................................185PM-HSR-OB+/PT-HSR-OB+: HD-SDI/SD-SDI with Reclocking Output Modules .....186
Operation ..............................................................................................................186
Installation .............................................................................................................188
Configuration ........................................................................................................188
Controllable Parameters .........................................................................................188
Functional Block Diagram .......................................................................................190
Specifications .........................................................................................................190
PT-HSRO-OB+: Fiber Optical 3G HD-SDI, 1.5G HD-SDI, and SD-SDI Serial VideoTransmitter Module
PT-HSRO-OBG+/PT-HSR8O-OBG+: Fiber Optical 3G/1.5G HD-SDI, and SD-SDI Serial
Video Transmitter Module With Power Saving ......................................................192Operation ..............................................................................................................192
Installation ..............................................................................................................194
Configuration ........................................................................................................194
Controllable Parameters .........................................................................................194
SFP Specifications ...................................................................................................196
Functional Block Diagram .......................................................................................198
7/29/2019 Harris Platinum Frame and System Edition
11/453
Platinum Frames and ModulesInstallation, Configuration, and Operation Manual
ix
Copyright 2006-2011, Harris Corporation
Specifications .........................................................................................................199
PM-HSR-OB/PT-HSR-OB: HD-SDI/SD-SDI with Reclocking Output Modules
PM-HSR-DOB/PT-HS-DOB: HD-SDI/SD-SDI with Reclocking andDual Output Modules ................................................................................................200
Operation ..............................................................................................................200
Installation .............................................................................................................202
Configuration ........................................................................................................203Controllable Parameters .........................................................................................203
Functional Block Diagram .......................................................................................204
Specifications..........................................................................................................205
PM-SR-OBG+/PT-SR-OBG+: SD-SDI with Reclocking Output Modules ...................206
Operation ..............................................................................................................206
Installation .............................................................................................................207
Configuration ........................................................................................................207
Controllable Parameters .........................................................................................207
Functional Block Diagram .......................................................................................209
Specifications .........................................................................................................209
PM-SR-OB+/PT-SR-OB+: SD-SDI with Reclocking Output Modules ........................210
Operation ..............................................................................................................210
Installation .............................................................................................................211
Configuration ........................................................................................................211
Controllable Parameters .........................................................................................212
Functional Block Diagram .......................................................................................213
Specifications .........................................................................................................213
PM-SR-OB/PT-SR-OB: SD-SDI with Reclocking Output Modules
PM-SR-DOB/PT-SR-DOB: SD-SDI with Reclocking and Dual Output Modules .......215
Operation ..............................................................................................................215
Installation .............................................................................................................216
Configuration ........................................................................................................216
Controllable Parameters .........................................................................................217
Functional Block Diagram .......................................................................................218
Specifications .........................................................................................................218
PM-AEB-OB/PT-AEB-OB: AES Balanced Output Modules
PM-AEC-OB/PT-AEC-OB: AES Coaxial Output Modules ..........................................220
Operation ..............................................................................................................220
Installation .............................................................................................................221
Configuration ........................................................................................................222
Controllable Parameters .........................................................................................222
Functional Block Diagram .......................................................................................223
Pinout Diagram ......................................................................................................223
Specifications .........................................................................................................224
PM-AEBT-OB/PT-AEBT-OB: AES Balanced Output Modules with TDM Capability
PM-AECT-OB/PT-AECT-OB: AES Coaxial Output Modules with TDM Capability ..226
Operation ...............................................................................................................226
Installation .............................................................................................................227
Configuration ........................................................................................................228
7/29/2019 Harris Platinum Frame and System Edition
12/453
Contentsx
Copyright 2006-2011, Harris Corporation
Controllable Parameters .........................................................................................228
Functional Block Diagram .......................................................................................230
Pinout Diagram ......................................................................................................231
Specifications .........................................................................................................232
PM-ENC-OB/PT-ENC-OB: SD to Analog Video Encoder Modules
PM-ENC-DOB/PT-ENC-DOB: SD to Analog Video Encoder Moduleswith Dual Output ......................................................................................................233
Operation ..............................................................................................................233
Installation .............................................................................................................235
Configuration ........................................................................................................235
Controllable Parameters .........................................................................................235
Functional Block Diagram .......................................................................................237
Specifications .........................................................................................................238
PM-DAC-OB/PT-DAC-OB: AES to Analog Audio Converter Output Modules ........239
Operation ..............................................................................................................239
Installation .............................................................................................................240
Configuration ........................................................................................................241
Functional Block Diagram .......................................................................................242
Pinout Diagram ......................................................................................................243
Specifications .........................................................................................................244
PM-DACT-OB/PT-DACT-OB: AES to Analog Audio ConverterOutput Modules with TDM Capability .....................................................................246
Operation ..............................................................................................................246
Installation ..............................................................................................................247
Configuration ........................................................................................................247
Controllable Parameters .........................................................................................247
Functional Block Diagram .......................................................................................250
Pinout Diagram ......................................................................................................251
Specifications .........................................................................................................252PT-HSR1310S-OB: Fiber Optical HD/SD Serial Video Transmitter Module ............254
Operation ..............................................................................................................254
Installation .............................................................................................................255
Configuration ........................................................................................................255
Controllable Parameters .........................................................................................255
Functional Block Diagram .......................................................................................257
Specifications .........................................................................................................257
PT-MUX-3G: SDI Audio Embedder Submodule with 3 Gb/s Capability
PT-MUX: SDI Audio Embedder Submodule with 1.5 HD-SDIand SD-SDI Capability ...............................................................................................259
Operation ..............................................................................................................259Installation .............................................................................................................261
Configuration ........................................................................................................261
Controllable Parameters .........................................................................................262
Functional Block Diagram .......................................................................................265
Specifications .........................................................................................................266
PT-MADI4C-OBG - Platinum Multichannel Audio Digital Interface (MADI) Output
7/29/2019 Harris Platinum Frame and System Edition
13/453
Platinum Frames and ModulesInstallation, Configuration, and Operation Manual
xi
Copyright 2006-2011, Harris Corporation
Module .......................................................................................................................267
MADI Output Module (PT-MADI4C-OBG) ...............................................................268
Controlling the MADI Output Module through Navigator .......................................268
Reference Locking ..................................................................................................270
TDM Input .............................................................................................................271
TDM Output Mapping ...........................................................................................271
Specifications .........................................................................................................272
Power Consumption ..............................................................................................272
PT-MADI4C-OBG Parameters .................................................................................273
Chapter 5 Crosspoint Modules ...........................................................................................277Crosspoint Module General Description ..................................................................278
Controllable Parameters Lists .................................................................................279
Signal Flow Diagram ..............................................................................................280
PM-4032-3G5: 40x32 3G HD-SDI Crosspoint Modules ..........................................282
Operation ...............................................................................................................282Installation ..............................................................................................................282
Configuration .........................................................................................................282
Controllable Parameters .........................................................................................283
Functional Block Diagram .......................................................................................283
Specifications..........................................................................................................283
PM-64x64-X9/PM-6464-3G9: 64x64 Crosspoint Modules .....................................284
Operation ...............................................................................................................284
Installation ..............................................................................................................284
Configuration .........................................................................................................285
Controllable Parameters .........................................................................................285
Functional Block Diagram .......................................................................................285Specifications..........................................................................................................285
PM-7264-3G5: 72x64 3G HD-SDI Crosspoint Modules ..........................................286
Operation ...............................................................................................................286
Installation ..............................................................................................................286
Configuration .........................................................................................................286
Controllable Parameters .........................................................................................287
Functional Block Diagram .......................................................................................287
Specifications..........................................................................................................287
PM-128x128-X9/PM-128128-3G9: 128x128 Crosspoint Module ...........................288
Operation ...............................................................................................................288
Installation ..............................................................................................................288Configuration .........................................................................................................289
Controllable Parameters .........................................................................................289
Functional Block Diagram .......................................................................................289
Specifications..........................................................................................................289
PT-128x256-X15/PT-128256-3G15/PT-128x256-X28/PT-128256-3G28: 128x256Crosspoint Module ....................................................................................................290
7/29/2019 Harris Platinum Frame and System Edition
14/453
Contentsxii
Copyright 2006-2011, Harris Corporation
Operation ...............................................................................................................290
Installation ..............................................................................................................291
Configuration .........................................................................................................291
Controllable Parameters .........................................................................................291
Functional Block Diagram .......................................................................................291
Specifications..........................................................................................................291
PM-ATDM9-X5/PM-ATDM16-X9/PT-ATDM16-X15/PT-ATDM32-X15/PT-ATDM32-X28/PT-ATDM64-X28: Advanced TDM Crosspoint Modules ..............292
Operation ...............................................................................................................292
Installation ..............................................................................................................295
Configuration .........................................................................................................295
Controllable Parameters .........................................................................................295
Functional Block Diagram .......................................................................................296
Specifications..........................................................................................................296
Chapter 6 Output Monitoring Modules ..........................................................................297Output Monitoring Module General Description ...................................................298
Controllable Parameters List ...................................................................................302
Signal Flow Diagram ..............................................................................................302
PT-HSR-OM: HD/SD Output Monitoring Module ....................................................303
Operation ...............................................................................................................303
Installation ..............................................................................................................304
Configuration .........................................................................................................304
Controllable Parameters .........................................................................................304
Functional Block Diagram .......................................................................................305
Specifications..........................................................................................................305
PT-HSRAEC-OM: 3G-SDI/HD-SDI/SD-SDI Serial VideoOutput Monitoring Module ......................................................................................307
Operation ...............................................................................................................307
Installation ..............................................................................................................309
Configuration .........................................................................................................309
Controllable Parameters .........................................................................................309
Functional Block Diagram .......................................................................................311
Specifications..........................................................................................................312
Chapter 7 Installation ..........................................................................................................313Before You Begin ......................................................................................................314
Special Pre-Installation Information for Upgrading 3 Gb Input, Output, andCrosspoint Module Firmware ...................................................................................315
Installing Input and Output Modules ......................................................................319
Installing Crosspoint Modules ..................................................................................321
Module Placement .................................................................................................321
Installing Modules ..................................................................................................322
7/29/2019 Harris Platinum Frame and System Edition
15/453
Platinum Frames and ModulesInstallation, Configuration, and Operation Manual
xiii
Copyright 2006-2011, Harris Corporation
Specialized Installation and Removal Procedures for PT-HS1310S-IB,PT-HSRO-OBG+, and PT-HSR1310S-OB Fiber Optical Modules ...............................323
Installing Modules ..................................................................................................323
Removing Modules ................................................................................................324
Inspecting and Cleaning Fiber Optic Connections ...................................................325
Installing Output Monitoring Modules ....................................................................328
Installing Sync Modules .............................................................................................328Installing Alarm Modules...........................................................................................329
Installing Back Panel Modules ..................................................................................330
Installing Resource Modules .....................................................................................331
Replacing Resource Module Firmware......................................................................331
Use Cases ...............................................................................................................331
Installing Power Supplies ..........................................................................................335
Replacing Fans ...........................................................................................................337
Configuration .........................................................................................................340
Installing a Platinum Frame .......................................................................................340
Common Issues and Things to Check .....................................................................340
Commonly Performed Procedures ..........................................................................341
Field Upgrading and/or Replacing Platinum Components .....................................342
Chapter 8 Configuration........................................................................................................343Card-Edge Controls ....................................................................................................344
Using the Card-Edge Controls ................................................................................344
Read-Only and Adjustable Parameters ....................................................................344
Card-Edge Screen Saver .........................................................................................345
Controllable Parameters List Appearance ...............................................................345
Navigating the Parameters List ...............................................................................345Frame Controllable Parameters ................................................................................346
Default Settings .....................................................................................................346
Application Parameters ..........................................................................................347
Fail-Safe Parameters ...............................................................................................347
Configuring via Navigator or RouterMapper ..........................................................350
Adding Platinum Frames by Polling ........................................................................351
Adding Platinum Frames by Discovering .................................................................351
Adding Platinum Frames using the Create or Add Command .................................351
Frame Application Parameters Available Through Navigator or RouterMapper ........351
Configuring Sync Reference Switch Points ..............................................................356
Sync Reference Switch Modes ................................................................................356Configuring TDM Audio Matrices .............................................................................363
Routing Configuration (Analog Stereo/AES/Multiplex) ..........................................363
Adding a TDM Matrix to the Database ...................................................................363
Configuring Outputs for Audio Partitions ...............................................................368
Editing the Logical Database ..................................................................................374
7/29/2019 Harris Platinum Frame and System Edition
16/453
Contentsxiv
Copyright 2006-2011, Harris Corporation
Chapter 9 Terminal Operation............................................................................................383Establishing Terminal Operations Session................................................................383
Establishing Terminal Operation Sessions for Serial Control Interface Products .384
Establishing Telnet Sessions for Ethernet Control Interface Products ...................384
Protocol Support for Platinum Routers.....................................................................385
Appendix A Safety Precautions, Certifications, Compliances ...............................387Safety Terms and Symbols in this Manual ..............................................................388
Safety Terms and Symbols on the Product...............................................................388
Preventing Electrostatic Discharge ...........................................................................389
Injury Precautions ......................................................................................................390
Product Damage Precautions ....................................................................................392
EMC and Safety Standards .......................................................................................394
Additional EMC Information ..................................................................................394
Appendix B Laser Safety Guidelines ..................................................................................397General Laser Information .........................................................................................397
Lasers and Eye Damage ............................................................................................398
Classification of Lasers ...............................................................................................398
Laser Safety Precautions for Optical Fiber Communication Systems .....................398
Laser Safety ...........................................................................................................399
Precautions for Enclosed Systems ...........................................................................399
Precautions for Unenclosed Systems .......................................................................400
Labels .........................................................................................................................401
Specifications ..............................................................................................................401
Index .........................................................................................................................403
7/29/2019 Harris Platinum Frame and System Edition
17/453
xv
Copyright 2006-2011, Harris Corporation
About This Manual
This manual provides information on the features and applications for the Platinumwideband digital multirate routing switcher.
Audience This manual is written for engineers, technicians, and operators responsible for installation,
setup, maintenance, and/or operation of the product, and is useful to operations personnelfor purposes of daily operation and reference.
Revision HistoryTable P-1 Revision History of Manual
Edition Date Comments
A March 2006 Initial production release
B October 2006 Added PT-A2-DTB connector information Added PT-AEC-BOC connector information Added pinout diagrams for PT-ADC-IB and
PT-DAC-OB modules
C December 2006 Added 9RU support Added new crosspoint sizes Added pinout information for RS-232 and RS-422
serial ports
D October 2007 Updated PM-ADC-IB/PT-ADC-IB and PM-DAC-OB/PT-DAC-OB specifications
Added TDM support Added PT-SYNC information
E December 2007 Added PM-DACT-OB/PT-DACT-OB information Updated PT-EXPS information
Added 3 Gb/s input/output module informationF January 2008 Updated specification information for PM-HSIB+
and PT-HSIB+ modules Updated specification information for
PM-HSR-OB+ and PT-HSR-OB+ modules
G February 2008 Updated RouterMapper-configurable parameterslist
Added fiber-optical module information
7/29/2019 Harris Platinum Frame and System Edition
18/453
About This Manualxvi
Copyright 2006-2011, Harris Corporation
H March 2008 Updated PM-ADCT-IB and PT-ADCT-IB linearitydeviation
Updated crosspoint installation procedures
I June 2008 Added 5RU support Added DC power supply information Updated fiber optical modules information Added firmware upgrade procedures for 3 Gb
input, output, and crosspoint modules
J October 2008 Added 3 Gb fiber optical modules Added configuration of TDM audio matrices
information Updated DC power supply information
K December 2008 Added information concerning upgradingPlatinum resource module firmware
Updated information concerning fan replacement
Added information concerning Platinum powersaving modules
L February 2009 Updated information concerning the PT-SYNCmodule
Updated information concerning return loss
M August 2009 Added information concerning PT-DX-SB andPT-MX-SB modules
Added information concerning switch referencepoint configuration
N October 2009 Added information concerning PT-HSRO-OBG+modules
Updated 9RU frame output monitoring
architecture Added information concerning Navigator
O April 2010 Updated PT-DEC-IB parameter list Added information concerning PT-HSRAEC-OM
modules Removed information concerning audio delay
parameter
P August 2010 Added new parameter to PT-DACT-OB parameterlist
Updated parameters in PT-ADCT-IB parameter list
Q November 2010 Added PT-FSDMX-IBG and PT-FSDMXO-IBGmodule support
R February 2011 Added directions for connecting cables onexternal power supplies.
S July 2011 Added Platinum MADI Input and Output Modules(PT-MADI4C-IBG and PT-MADI-OBG).
Added PT-HSR8C1D-IBG and PT-HSR1D-IBG DigitalMultirate Matrix Expansion Input and ReceiverModules.
Table P-1 Revision History of Manual (Continued)
Edition Date Comments
7/29/2019 Harris Platinum Frame and System Edition
19/453
Platinum Frames and ModulesInstallation, Configuration, and Operation Manual
xvii
Copyright 2006-2011, Harris Corporation
Writing ConventionsTo enhance your understanding, the authors of this manual have adhered to the followingtext conventions:
Obtaining Documents
The installation and operation manuals for most Harris BCD products are included on yourDocumentation and Product Resources DVD as individual Adobe Acrobat PDF files. Most ofthe software applications contained on the DVD include Online Help (electronic documentsintegrated into their respective software applications). While working in the application, youcan open the Online Help and print out individual topics. The most up-to-datedocumentation and software is always available on our website.
T November 2011 Added information on SFPs for PT-HSO-IB+ andPT-HSRO-OBG+ - Fiber Optical Serial VideoReceiver and Transmitter Modules (3G HD-SDI/1.5G HD-SDI/SD-SDI).
Table P-1 Revision History of Manual (Continued)
Edition Date Comments
Table P-2 Writing Conventions
Term orConvention Description
Bold Indicates dialog boxes, property sheets, fields, buttons, check boxes,list boxes, combo boxes, menus, submenus, windows, lists, andselection names
Italics Indicates email addresses, the names of books or publications, andthe first instances of new terms and specialized words that needemphasis
CAPS Indicates a specific key on the keyboard, such as ENTER, TAB, CTRL,ALT, or DELETE
Code Indicates variables or command-line entries, such as a DOS entry orsomething you type into a field
> or Indicates the direction of navigation through a hierarchy of menusand windows
hyperlink Indicates a jump to another location within the electronic documentor elsewhere
Internet address Indicates a jump to a website or URL
Indicates important information that helps to avoid and troubleshootproblems
To perform aprocedure
Indicates the introduction to a procedure or series of proceduralsteps
7/29/2019 Harris Platinum Frame and System Edition
20/453
About This Manualxviii
Copyright 2006-2011, Harris Corporation
Applications SDTV/HDTV/AES core routing: The Platinum wideband digital multirate routing
switcher can be used as an on-air router for up to 512x512 applications; for example,core facility routing, master control distribution, transmission solutions, etc.
SD to HD migration: The Platinum wideband digital multirate routing switcher willpass and reclock both standard SD (including 143, 177, 270, 360, and 540 Mb/s) andHD (1.485 Gb/s) signals, which allows you to route both SD and HD signals in the samerouter. Consequently, it provides you with a high degree of investment protection, inthat an SD facility could easily migrate to HD without the need to replace the router.
AES/EBU digital audio, SD, and HD in the same platform : The Platinum widebanddigital multirate routing switcher can switch signals from 3 Mb/s to 1.5Gb/s, therebyproviding a truly digital signal diagnostic solution. The Platinum I/O boards will routedigital audio, SD and HD. Now you can route nearly any digital audio or video signalwithin the same router platform.
Analog audio conversion
Analog video conversion
ASI / SSI routing applications Digital signal monitoring
Distributed routing
Central casting:Link two or more Platinum routers together between facilities, andcontrol and operate as if using one large routing system from your central facility.
7/29/2019 Harris Platinum Frame and System Edition
21/453
Platinum Frames and ModulesInstallation, Configuration, and Operation Manual
xix
Copyright 2006-2011, Harris Corporation
Unpacking/Shipping Information
Unpacking a Platinum Product
All products have been carefully inspected, tested, and calibrated before shipment to ensureyears of stable and trouble-free service.
1 Check the equipment for any visible damage that may have occurred during transit.
2 Confirm that you have received all items listed on the packing list.
3 Contact your dealer if any item on the packing list is missing.
4 Contact the carrier if any item is damaged.
5 Remove all packaging material from the product and its associated components before youinstall the unit.
Returning a Platinum ProductIn the unlikely event that a product fails to operate properly, please contact our CustomerService Department to obtain a Return Authorization (RA) number, then send the unit backfor servicing.
Keep at least one set of original packaging in the event that a product needs to be returnedfor service. If the original package is not available, you can supply your own packaging aslong as it meets the following criteria:
The packaging must be able to withstand the products weight.
The product must be held rigid within the packaging.
There must be at least 2 in. (5 cm) of space between the product and the container.
The corners of the product must be protected.If the product is still within the warranty period, we will return it to you by prepaid groundshipment after servicing.
7/29/2019 Harris Platinum Frame and System Edition
22/453
About This Manualxx
Copyright 2006-2011, Harris Corporation
Standards There are three sets of standards used in the development of the Platinum product line:product standards, compliance standards, and safety standards.
Platinum Product StandardsThe following product standards apply to the Platinum router. Please reference the pertinentstandard for more information.
Professional Video
SMPTE 259MSMPTE Standard for Television - 10-Bit 4:2:2 Component and 4fsc Composite Digital Signals- Serial Digital Interface
SMPTE 292MSMPTE Standard for Television - Bit-Serial Digital Interface for High Definition TelevisionSystems
SMPTE 344MSMPTE Standard for Television - 540 Mb/s Serial Digital Interface
SMPTE 424MSMPTE Standard for Television - 3 Gb/s Signal/Data Serial Interface
DVB-ASIDigital Video Broadcasting Interfaces for CATV/SMATV Headends and Similar ProfessionalEquipment
SMPTE-170M
For Analog Video Signal quality
FCC 73.699U.S. Federal guidelines for NTSC analog composite video
ITU-R.BT 470Guidelines for PAL analog composite video
ITU-R BT601-4For Serial Digital Video
Digital Audio
AES3-2003AES Recommended Practice for Digital Audio Engineering - Serial Transmission Format forTwo-Channel Linearly Represented Digital Audio Data
AES3id-2001AES Information Document for Digital Audio Engineering - Transmission of AES3 FormattedData by Unbalanced Coaxial Cable
7/29/2019 Harris Platinum Frame and System Edition
23/453
Platinum Frames and ModulesInstallation, Configuration, and Operation Manual
xxi
Copyright 2006-2011, Harris Corporation
SMPTE 276M-1995SMPTE Standard for Television - Transmission of AES-EBU Digital Audio Signals Over CoaxialCable
PT-PS Power Supply
SafetyTUV approved to latest revision of UL 60950-1 and CSA 22.2 complete with CB Report withall country deviations1
CE MarkEMC Compliance tested under EN 55103-1, 2 as a Class A Device in an E4 environment
NEBSLevel 3 Certification, Type 4 Environment, SBC Special Requirements, AT&T NEDS
EMC Compliance StandardsThe following EMC compliance standards apply:
EN 50081-1
EN 55022
EN 50082-1
IEC 1000-4-2 1995-01
IEC 801-3 1984
IEC 1000-4-4 1995-01
Part 15 of the FCC Rules
ICES-003 of the Canadian Department of Communications
Restriction on Hazardous Substances (RoHS) ComplianceDirective 2002/95/EC commonly known as the European Union (EU) Restriction onHazardous Substances (RoHS) sets limits on the use of certain substances found inelectrical and electronic equipment. The intent of this legislation is to reduce the amount ofhazardous chemicals that may leach out of landfill sites or otherwise contaminate theenvironment during end-of-life recycling. The Directive, which took effect on July 1, 2006,refers to the following hazardous substances:
Lead (Pb)
Mercury (Hg)
Cadmium (Cd) Hexavalent Chromium (Cr-V1)
Polybrominated Biphenyls (PBB)
Polybrominated Diphenyl Ethers (PBDE)
1 A total of 8 PT-PS power supplies can be used in the Platinum chassis. TUV will test for chassis leakagecurrents using all 8 power supplies operating simultaneously to determine the total chassis leakagecurrent. This total chassis leakage current value must meet EN60950 and CSA 22.2.
7/29/2019 Harris Platinum Frame and System Edition
24/453
About This Manualxxii
Copyright 2006-2011, Harris Corporation
In accordance with this EU Directive, all products sold in the European Union will be fullyRoHS-compliant and lead-free. Spare parts supplied for the repair and upgrade ofequipment sold before July 1, 2006 are exempt from the legislation. Equipment thatcomplies with the EU directive will be marked with a RoHS-compliant emblem, as shown inFigure P-1.
Figure P-1 RoHS Compliance Emblem
Waste from Electrical and Electronic Equipment (WEEE) ComplianceThe European Union (EU) Directive 2002/96/EC on Waste from Electrical and ElectronicEquipment (WEEE) deals with the collection, treatment, recovery, and recycling of electricaland electronic waste products. The objective of the WEEE Directive is to assign the
responsibility for the disposal of associated hazardous waste to either the producers or usersof these products. As of August 13, 2005, producers or users are required to recycleelectrical and electronic equipment at end of its useful life, and may not dispose of theequipment in landfills or by using other unapproved methods. (Some EU member statesmay have different deadlines.)
In accordance with this EU Directive, companies selling electric or electronic devices in theEU will affix labels indicating that such products must be properly recycled. Contact yourSales representative for information on returning these products for recycling. Equipmentthat complies with the EU directive will be marked with a WEEE-compliant emblem, asshown in Figure P-2.
http://-/?-http://-/?-http://-/?-http://-/?-7/29/2019 Harris Platinum Frame and System Edition
25/453
Platinum Frames and ModulesInstallation, Configuration, and Operation Manual
xxiii
Copyright 2006-2011, Harris Corporation
Figure P-2 WEEE Compliance Emblem
Safety StandardsThe following safety standards apply (full descriptions of these standards can be found inAppendix A, Safety Precautions, Certifications, Compliances on page 387):
IEC-950
UL 60950-1
EN60950: 1992 + A1: 1993 + A2: 1993 +A3: 1995 A4: 1997 +A11: 1997 EMKO-TSE(74-SEC) 207/94
UL1419
CSA C22.2 No. 1
Safety InformationCarefully review all safety precautions to avoid injury and prevent damage to this product orany products connected to it. You will find a complete list of safety precautions inAppendix A, Safety Precautions, Certifications, Compliances on page 387. Anyuser-serviceable components (such as fuses or batteries) are only replaceable by thosecomponents listed in the manual.
IMPORTANT! Only qualified personnel should perform service procedures.
7/29/2019 Harris Platinum Frame and System Edition
26/453
About This Manualxxiv
Copyright 2006-2011, Harris Corporation
Safety Terms and Symbols in this Manual
T
WARNING: Statements identifying conditions or practices that may result inpersonal injury or loss of life. High voltage is present.
CAUTION: Statements identifying conditions or practices that can result in damageto the equipment or other property.
7/29/2019 Harris Platinum Frame and System Edition
27/453
1
Copyright 2006-2011, Harris Corporation
1 Introduction
The Platinum routing switcher system extends both the matrix size and functionality of ourrouting switcher product line. Its flexible modular architecture accommodates both standarddefinition and high definition digital video signals while keeping a versatile frame andcontrol system. This combination allows high performance, multi-format video routingwithin a single, flexible frame.
This chapter covers the following topics:
Control Features on page 17
Frame-Specific Components on page 10
Frame Specifications on page 21
Front Panel LED Indicators on page 15
Main Features on page 2
Module-Specific Components on page 11
Product Description on page 1
Product DescriptionThe Platinum routing switcher system provides matrix expandability beyond 88, to512512 in a single frame. The 88 building block provides ideal growth and flexibility formixed applications such as high definition and serial digital interface, and other integratedprocessing opportunities such as analog and/or digital conversion. With its ability to routesignals ranging from 3.0 Mb/s to 2.97 Gb/s, the Platinum router offers a clear growth pathfrom lower bit rate signals to high bandwidth, high definition format signals. This router willalso handle both AES and polarity sensitive ASI/SSI signal formats.
The Platinum router is available in these frame sizes:
The 5RU (PM-FR-5) frame supports matrices up to 7264.
The 9RU (PM-FR-9) frame supports matrices up to 128128.
The 15RU (PT-FR-15) frame supports matrices up to 256256.
The 28RU (PT-FR-28) frame supports matrices up to 512512.
All of these frames use common, front-loadable, and hot-swappable input and outputmodules. The 9RU, 15RU, and 28RU frames use common crosspoint modules. (The 5RUframe uses a different crosspoint module). Each frame has a passive module interconnect(MI) signal distribution module interconnecting the routing system.
7/29/2019 Harris Platinum Frame and System Edition
28/453
Chapter 1Introduction
2
Copyright 2006-2011, Harris Corporation
The frames support user-friendly, self guiding insertion and extraction: No module can beinserted into the wrong area where damage (electrical or physical) may occur. The framesare designed so that, during module insertion or extraction, damage to other modules isprevented. All modules ground before any active components are energized. This includesstandard make-before-break power connectors and grounding tabs, where necessary, onmodules.
Each frame is accessible from the front via sectioned, removable doors. Status LEDs can beviewed through these doors; these LEDs indicate power supply presence (and status),resource module usage, and link light indicators for Ethernet communications ports. Twotri-color LEDs that indicate user-defined alarm conditions are also viewable through thedoor. (See Figure 1-8 on page 16.)
The frames are designed to be compliant with NEBS certification requirements (for example,non-removable door option, locking power supplies, etc.).
Platinum frames are compatible with all of Harriss router control software products, such asCCS Navigator and RouterMapper.
A key advantage of the Platinum router is that it provides redundant crosspoint paths in the5RU, 9RU, and 15RU frames. This function, a common concern of professional broadcastcustomers, is not offered by many current competitive products. By using redundantcrosspoint modules, a fully redundant path through the system is available. While the 5RU,9RU, and 15RU Platinum frames provide complete hardware crosspoint redundancy, allframes offer redundant path operation based on advanced rule sets integrated into thecontrol system, thus providing a more robust operation than typically found in competitiveofferings.
Main Features Routing for large systems
7264 in a 5RU frame
128128 in a 9RU frame
256256 in a 15RU frame
512512 in a 28RU frame
Video routing
HD-SDI digital multirate from 3.00 Mb/s to 2.97 Gb/s
Digital video signals including SMPTE 310, SDI, ASI, HD-SDI
Analog video via conversion to/from SDI on I/O modules
Audio routing Digital audio signals including balanced and unbalanced (coaxial) AES
Analog stereo audio via conversion to/from AES on I/O modules
Module I/O in groups of 8
Route to/from digital and analog signals with no external processing
Front-loading, hot swappable modules
Redundancy (power supplies, resource modules, signal paths) throughout
Enhanced control and monitoring capabilities
Secure access rights with restrictions by level, source, and destination
CCSP, SNMP, and third-party protocol support
http://-/?-http://-/?-http://-/?-7/29/2019 Harris Platinum Frame and System Edition
29/453
Platinum Frames and ModulesInstallation, Configuration, and Operation Manual
3
Copyright 2006-2011, Harris Corporation
Frame ArchitecturePlatinum routing switchers are available in 5RU, 9RU, 15RU, and 28RU frame sizes. Eachsize can accommodate any signal format or combination of signal formats, and hasdifferent options available for customizing. (Some aspects of frame customization andmatrix size specifics will be discussed in detail in each signal formats individual section). For
illustrations of each frame sizes physical architecture, see Figure 1-1 on page 4 throughFigure 1-4 on page 6.
Table 1-1 Platinum Series Architectural Information
Architecture 5RU(PM-FR-5)
9RU(PM-FR-9)
15RU(PT-FR-15)
28RU(PT-FR-28)
Dimensions
Width 17.5 in. (44.5 cm) 17.5 in. (44.5 cm) 17.5 in. (44.5 cm) 17.5 in. (44.5 cm)
Depth 18.4 in.(46.7 cm) 18.4 in.(46.7 cm) 18.4 in.(46.7cm) 18.4 in.(46.7cm)
Height 8.75 in. (22.2 cm) 15.75 in.(40.0
cm)
26.25 in.(66.7 cm) 49.0 in.(124.5 cm)
Weight fully loaded(approx.)
68 lb (31 kg) 125 lb (57 kg) 210 lb (95 kg) 350 lb (159 kg)
Matrix size 7264 128128 256256 512512
Matrix module capacity
Input slots 9 16 32 64
Output slots 8 16 32 64
Crosspoint slots 2 (1 redundant) 2 (1 redundant) 4 (2 redundant) 8
Resource slots 2 (1 redundant) 2 (1 redundant) 2 (1 redundant) 2 (1 redundant)
TDM slots 2 (1 redundant) 2 (1 redundant) 2 (1 redundant) 2 (1 redundant)Sync slots 2 (1 redundant) 2 (1 redundant) 2 (1 redundant) 2 (1 redundant)
PSU slots 2 4 4 8
Monitoring slots 2 4 4 4
Alarm slots 1 1 1 1
Streaming slots 1 1 1 1
Standard equipment
Power supply 1 1 2 4
Fan module 1 1 1 2
Upgrade options
Redundant power supply Yes Yes Yes Yes
Redundant resourcemodule
Yes Yes Yes Yes
Redundant sync options Yes Yes Yes Yes
Redundant crosspoint Yes Yes Yes Yes
7/29/2019 Harris Platinum Frame and System Edition
30/453
Chapter 1Introduction
4
Copyright 2006-2011, Harris Corporation
Figure 1-1 7264 Physical Architecture (Front View)
Figure 1-2 128128 Physical Architecture (Front View)
MI module
Outputs 1-128
Resource (2), TDM XPT (2), Sync (2), OM (4)
Inputs 1-1282 1
Crosspoint module(128128)
Output modules
Reclocker Driver
EQ
Input modules
Power supplies
7/29/2019 Harris Platinum Frame and System Edition
31/453
Platinum Frames and ModulesInstallation, Configuration, and Operation Manual
5
Copyright 2006-2011, Harris Corporation
Figure 1-3 256256 Physical Architecture (Front View)
1
Resource (2), TDM XPT (2), Sync (2), OM (4)
2
34
Power supplies
Crosspoint module(128256)
Outputs 1-128 Inputs 1-128
Outputs 129-256
Inputs 129-256
EQ
Input modules
MI module
Output modules
Reclocker Driver
7/29/2019 Harris Platinum Frame and System Edition
32/453
Chapter 1Introduction
6
Copyright 2006-2011, Harris Corporation
Figure 1-4 512512 Physical Architecture (Front View)
EQ
Input modules
MI module
12
34
56
78
Outputs 1-128Inputs 1-128
Outpu ts 129-256 Inputs 129-256
Outputs 257-384 Inputs 257-384
Outputs 385-512 Inputs 385-512
Power supplies
Power supplies
Crosspoint module(128256)
Output modules
Reclocker Driver
Resource (2), TDM XPT (2),Sync (2), OM (4)
7/29/2019 Harris Platinum Frame and System Edition
33/453
Platinum Frames and ModulesInstallation, Configuration, and Operation Manual
7
Copyright 2006-2011, Harris Corporation
The Platinum router's modular architecture consists of separate input and output modules,each of which contains eight inputs or outputs; and crosspoint matrixes (redundantcrosspoint paths can be configured for robust operation). Depending on the configuration,one or more modules may be present in the frame for various optional functions. See Table1-1 on page 3 for frame population information.
Detailed information about input modules (such as configuration, installation, blockdiagrams, and specifications) is outlined in Chapter 3.
Detailed information about output modules is outlined in Chapter 4.
Detailed information about crosspoint modules is outlined in Chapter 5.
Detai
Recommended