View
215
Download
1
Category
Tags:
Preview:
Citation preview
DAVIS TASK FORCE MODEL 200 Davis Manufacturing Wichita Kansas
Model 1225-3000 Serial # 3292 Manufactured between 1959 and 1979 under the Davis name
Case bought out Davis in 1969 but manufactured it under the Davis name until 1980 when they renamed the machine to CASE TF300
Machine provided by MR. Lee Sisk, Bluemont VA., March 8, 2009 on a Sunday Machine had been abused by a big loader shoving it around and will require a lot of tender loving care to bring it back to life, It seems to be 41 years old as of 2009
Note of Thanks To: Harman Corporation P.O.Box 80665 360 South Street Rochester, Michigan 48307 USA Your Exact Fit Handgrip Finished This Machine , Note: It is now completely operational
From: Chestnut Grove Industries CEO; Larry Horst 2442 Chestnut Grove Road Sharpsburg, Maryland 21782 Web: www.chestnutgroveindustries.net
The new muffler constructionI Went to Harvey Briggs Welding & Radiator shop located in Charlestown/
Ranson, West Virginia and bought some pieces of metal and I cut out the pieces with the plasma cutter
I next tacked the coupling to the end plate and left a good inch inside between the end of the coupling
and the baffle plate
Here I have welded the outlet pipe to the end plate and chucked it into the lathe so
as to hit it with a hammer and get it somewhat inline (TRUED it UP)
I have it trued up and welded but good now to spin her around and make a final good looking heavy duty
muffler
I am not going to screw it on yetI am going over to Briggs’ and see if it passes his ok(
Come on Harvey give it the once over)
Grilles were a real piece of workHarvey Briggs helped once again as he supplied the metal to make the bending jig
to form the bends on the grilles
Recommended