View
218
Download
0
Category
Preview:
Citation preview
GM SPO Mexico Guideline
DESADV (D.97A) 1 Revised May 24, 2011
GENERAL MOTORS DE MEXICO – SPOM
SERVICE PARTS OPERATION
EDIFACT IMPLEMENTATION GUIDELINE
D97.A
FOR
DESADV MESSAGE DESPATCH ADVICE (ASN) MESSAGE
This Guideline issued by:
GENERAL MOTORS DE MEXICO S DE RL DE CV – SPOM SERVICE PARTS OPERATIONS AV. INDUSTRIA MINERA 700
FRACCIONAMIENTO INDUSTRIAL, TOLUCA, MEXICO CP 50000
GM SPO Mexico Guideline
DESADV (D.97A) 2 Revised May 24, 2011
SPOM UNB Receiver ID: GMSPOMEX
SPOM MATERIAL ISSUER ID: 23763
TABLE OF CONTENTS
REVISION HISTORY ......................................................................................................................................................... 4
Issue List (temporary Section) ....................................................................................................................................... 4
INTRODUCTION ............................................................................................................................................................. 5
Segment and Element Separators and Terminators .................................................................................................. 5
SEGMENT CLARIFICATION ............................................................................................................................................. 5
Heading Section ......................................................................................................................................................... 5
Detail Section: ............................................................................................................................................................ 7
Summary Section: ...................................................................................................................................................... 8
DESADV Message – GM SPO Mexico Subset ................................................................................................................. 9
Heading Section: ........................................................................................................................................................ 9
Detail Section: .......................................................................................................................................................... 10
Summary Section: .................................................................................................................................................... 11
Service Segment Description ....................................................................................................................................... 12
0000 UNB - INTERCHANGE HEADER ........................................................................................................... 13
0010 UNH - MESSAGE HEADER .................................................................................................................. 15
500 UNT - message trailer ............................................................................................................................ 16
510 UNZ - INTERCHANGE TRAILER .................................................................................................................... 17
DATA SEGMENTS DESCRIPTION ................................................................................................................................... 18
Segment: BGM Beginning of Message .......................................................................................................... 18
Segment: DTM Date/Time/Period................................................................................................................. 20
Segment: MEA Measurements ..................................................................................................................... 21
GM SPO Mexico Guideline
DESADV (D.97A) 3 Revised May 24, 2011
Group: RFF Segment Group 1: Reference .......................................................................................................... 23
Segment: RFF Reference ............................................................................................................................... 24
Group: NAD Segment Group 2: Name and Address .......................................................................................... 25
Segment: NAD Name and Address ................................................................................................................ 26
Segment: LOC Place/Location Identification ................................................................................................. 29
Group: TDT Segment Group 6: Details of Transport .......................................................................................... 31
Segment: TDT Details of Transport ............................................................................................................... 32
Group: EQD Segment Group 8: Equipment Details ........................................................................................... 34
Segment: EQD Equipment Details ................................................................................................................. 35
Group: CPS Segment Group 10: Consignment Packing Sequence ..................................................................... 37
Segment: CPS Consignment Packing Sequence............................................................................................ 38
Group: PAC Segment Group 11: Package .......................................................................................................... 40
Segment: PAC Package .................................................................................................................................. 41
Group: PCI Segment Group 13: Package Identification ..................................................................................... 43
Segment: PCI Package Identification ............................................................................................................. 44
Segment: RFF Reference ............................................................................................................................... 46
Group: LIN Segment Group 15: Line Item .......................................................................................................... 47
Segment: LIN Line Item ................................................................................................................................. 48
Segment: QTY Quantity ................................................................................................................................. 50
Group: RFF Segment Group 16: Reference ........................................................................................................ 51
Segment: RFF Reference ............................................................................................................................... 52
DESADV SAMPLE MESSAGES ....................................................................................................................................... 53
Stock Order Example (order Types “NB”, “ZAS”, “ZSVP”)........................................................................................ 53
SHIP DIRECT EXAMPLE (Order Types “ZSD” and “ZVIP”) ......................................................................................... 54
GM SPO Mexico Guideline
DESADV (D.97A) 4 Revised May 24, 2011
REVISION HISTORY
Date Version Author/s Revision Details
March 24, 2011 0.1 Tom Barson, Covisint Initial Draft
April 3, 2011 0.2 Tom Barson, Covisint Updated LOC, CPS, PCI, and RFF instructions. Updated sample documents.
May 24, 2011. 0.3 Tom Barson, Covisint Updated BGM to include request for Mexican vendors to use invoice number as shipment identification. Updated NAD to include Freight Forwarder identification. Corrected SPO Mexico MI code value in NAD segment definition.
ISSUE LIST (TEMPORARY SECTION)
Date ID Descriptions Status /Resolution
3/30/2011 101 For LOC 02-1, need identifier for SPOM packaged and non-packaged docks.
Open. Will be optional in V1.
GM SPO Mexico Guideline
DESADV (D.97A) 5 Revised May 24, 2011
INTRODUCTION
This document is intended to describe the DESADV or Advance Ship Notice (ASN) message, representing a vendor’s or freight forwarder’s notification to General Motors Mexico SPO Division (SPOM) that a shipment has been made in response to a SPOM order. This guideline provides response instructions to all Purchase Order types issued by SPOM in the DELJIT Message. PO Type Document Type in EDI ===================================================== Ship Direct PO “ZSD” Air Stock (Expedited) PO “ZAS” VIP Purchase Order “ZSVP” Standard PO (Stock order) “NB” VIP Ship Direct PO “ZVIP” Any SPOM DESADV requirements that are dependent upon PO type are explained within the individual segment definitions and an example message is provided in response to the two basic order types, Stock and Ship Direct.
SEGMENT AND ELEMENT SEPARATORS AND TERMINATORS
The following usage is observed and expected by GM for EDIFACT D97A messages:: Element Separator + (Plus) Composite Separator : (Colon) Segment Terminator ‘ (Single Quote) Any variance from the above in the guidelines or the examples is unintentional.
SEGMENT CLARIFICATION
HEADING SECTION
UNB Interchange Header
The UNB is a service segment providing the unique identification of an interchange. It allows the
identification of the sender and the receiver of the interchange, gives date and time of preparation as well
as the interchange control reference and the application reference.
UNG Group Header
Not used.
UNH Message Header
A service segment starting and uniquely identifying a message. The message type code for the Despatch
advice message is DESADV.
GM SPO Mexico Guideline
DESADV (D.97A) 6 Revised May 24, 2011
Note: Despatch advice messages conforming to this document must contain the following data in
segment UNH, composite S009:
Data element 0065 DESADV 0052 D 0054 97A 0051 UN
BGM Beginning of Message
A segment for unique identification of the Despatch Advice document, by means of its name and its
number.
DTM Date/Time/Period
Date/time/period related to the whole message. The DTM segment must be specified at least once to
identify the Despatch Advice date.
MEA Measurements
A segment specifying the weight and volume of the consignment.
Segment Group 1: RFF-DTM
A group of segments giving references where necessary, their dates relating to the whole message, e.g. contract number.
RFF Reference
A segment for referencing documents relating to the whole despatch advice message, e.g. purchase orders, delivery instructions, import/export license.
Segment Group 2: NAD-LOC-SG3-SG4
A group of segments identifying names, addresses, locations, and required supporting documents relevant to the whole Despatch Advice.
NAD Name and Address
A segment for identifying names, addresses, and their functions relevant to the whole Despatch Advice. Identification of the parties involved is recommended for the Despatch Advice message, and is to be given in the NAD segment.
It is recommended that where possible, only the coded form of the party ID should be specified, e.g. the buyer and seller are known to each other, thus only the coded ID is required. The consignee or delivery address may vary and would have to be clearly specified, preferably in structured format.
LOC Place/Location Identification
A segment indicating more details regarding specific places/locations related to the party specified in the NAD segment, e.g. internal site/building number.
Segment Group 6: TDT-PCD-SG7
GM SPO Mexico Guideline
DESADV (D.97A) 7 Revised May 24, 2011
A group of segments specifying details of the mode and means of transport and date/time of departure and destination relevant to the whole despatch advice.
TDT Details of Transport
A segment specifying the carriage, and the mode and means of transport of the goods being despatched.
Segment Group 8: EQD-MEA-SEL-EQA-SG9
A group of segments providing information relative to the equipment used for the transportation of goods relevant to the whole despatch advice.
EQD Equipment Details
A segment to define fixed information regarding equipment used in conjunction with the whole despatch advice, and if required, to indicate responsibility for supply of the equipment.
DETAIL SECTION:
Segment Group 10: CPS-FTX-SG11-SG15
A group of segments providing details of all package levels and of the individual despatched items contained in the consignment. This segment group provides the capability to give the hierarchical packing relationships. The group defines a logical top-down order structure. The lowest level package information of the hierarchy is followed by the detail product information.
CPS Consignment Packing Sequence
A segment identifying the sequence in which packing of the consignment occurs, e.g. boxes loaded onto a pallet.
Segment Group 11: PAC-MEA-QTY-SG12-SG13
A group of segments identifying packaging, physical dimensions, marks and numbers, quantities, date and time information, handling information and information about packing at this level.
PAC Package
A segment specifying the number and type of the packages/physical units and the physical type of packaging for the despatched goods. The only use of this segment in the SPOM DESADV guideline is to serve as the required trigger segment for the following Segment Group 13.
Segment Group 13: PCI-RFF-DTM-GIR-SG14
A group of segments specifying markings, labels, and packing numbers.
PCI Package Identification
GM SPO Mexico Guideline
DESADV (D.97A) 8 Revised May 24, 2011
A segment specifying markings and/or labels used on individual physical units (packages) described in the PAC segment. The only use of this segment in the SPOM DESADV guideline is to serve as the required trigger segment for the following RFF segment.
RFF Reference
A segment for referencing the package identification e.g. master label number.
Segment Group 15:
LIN-PIA-IMD-MEA-QTY-ALI-GIN-GIR-DLM-DTM-NAD-TDT-HAN-FTX-MOA-SG16-SG17-SG18-SG19-SG20-SG23
A group of segments providing details of the individual despatched items.
LIN Line Item
A segment identifying the product being despatched. All other segments in the detail section following the LIN segment refer to that line item.
QTY Quantity
A segment to give quantity information concerning the product.
Segment Group 16: RFF-NAD-CTA-DTM
A group of segments to give reference numbers and dates.
RFF Reference
A segment identifying documents related to the line item.
SUMMARY SECTION:
UNT Message Trailer
A service segment ending a message, giving the total number of segments in the message and the control reference number of the message.
UNZ Interchange Trailer
A service segment ending an “interchange” (or EDI transmission).
GM SPO Mexico Guideline
DESADV (D.97A) 9 Revised May 24, 2011
DESADV MESSAGE – GM SPO MEXICO SUBSET
The following tables defines the subset of segments that form the mandatory (“Must Use”) and conditional
segments of the SPOM DESADV message. The segment grouping and looping structure is also represented.
HEADING SECTION:
Usage Pos. No.
Seg. ID
Name Req. Des.
Max Use
Group Repeat
Notes
Must Use 0000 UNB Interchange Header M 1 Must Use 0010 UNH Message Header M 1 Must Use 0020 BGM Beginning of Message M 1 Must Use 0030 DTM Date/Time/Period C 10 Not Used 0040 ALI Additional Information C 5 Must Use 0050 MEA Measurements C 5 Not Used 0060 MOA Monetary Amount C 5
0070 Segment Group 1: RFF-DTM C 10 Must Use 0080 RFF Reference M 1 Not Used 0090 DTM Date/Time/Period C 1
Must Use 0100 Segment Group 2: NAD-LOC-SG3-SG4 C 10 Must Use 0110 NAD Name and Address M 1 0120 LOC Place/Location Identification C 10
Not Used 0130 Segment Group 3: RFF-DTM C 10 Not Used 0140 RFF Reference M 1 Not Used 0150 DTM Date/Time/Period C 1
Not Used 0160 Segment Group 4: CTA-COM C 10 Not Used 0170 CTA Contact Information M 1 Not Used 0180 COM Communication Contact C 5
Not Used 0190 Segment Group 5: TOD-LOC-FTX C 10 Not Used 0200 TOD Terms of Delivery or Transport M 1 Not Used 0210 LOC Place/Location Identification C 5 Not Used 0220 FTX Free Text C 5
Must Use 0230 Segment Group 6: TDT-PCD-SG7 C 10 Must Use 0240 TDT Details of Transport M 1 Not Used 0250 PCD Percentage Details C 6
Not Used 0260 Segment Group 7: LOC-DTM C 10 Not Used 0270 LOC Place/Location Identification M 1 Not Used 0280 DTM Date/Time/Period C 10
0290 Segment Group 8: EQD-MEA-SEL-EQA-SG9 C 10 Must Use 0300 EQD Equipment Details M 1 Not Used 0310 MEA Measurements C 5 Not Used 0320 SEL Seal Number C 25 Not Used 0330 EQA Attached Equipment C 5
Not Used 0340 Segment Group 9: HAN-FTX C 10 Not Used 0350 HAN Handling Instructions M 1 Not Used 0360 FTX Free Text C 10
GM SPO Mexico Guideline
DESADV (D.97A) 10 Revised May 24, 2011
DETAIL SECTION:
Usage Pos. No.
Seg. ID
Name Req. Des.
Max Use
Group Repeat
Notes
Must Use 0370 Segment Group 10: CPS-FTX-SG11-SG15
C 9999
Must Use 0380 CPS Consignment Packing Sequence M 1 Not Used 0390 FTX Free Text C 5
0400 Segment Group 11: PAC-MEA-QTY-SG12-SG13
C 9999
Must Use 0410 PAC Package M 1 Not Used 0420 MEA Measurements C 10 Not Used 0430 QTY Quantity C 10
Not Used 0440 Segment Group 12: HAN-FTX C 10 Not Used 0450 HAN Handling Instructions M 1 Not Used 0460 FTX Free Text C 10
0470 Segment Group 13: PCI-RFF-DTM-GIR-SG14
C 1000
Must Use 0480 PCI Package Identification M 1 Must Use 0490 RFF Reference C 1 Not Used 0500 DTM Date/Time/Period C 5 Not Used 0510 GIR Related Identification Numbers C 99
Not Used 0520 Segment Group 14: GIN-DLM C 99 Not Used 0530 GIN Goods Identity Number M 1 Not Used 0540 DLM Delivery Limitations C 10
Must Use 0550 Segment Group 15: LIN-PIA-IMD-MEA-QTY-ALI-GIN-GIR-DLM-DTM-NAD-TDT-HAN-FTX-MOA-SG16-SG17-SG18-SG19-SG20-SG23
C 9999
Must Use 0560 LIN Line Item M 1 Not Used 0570 PIA Additional Product Id C 10 Not Used 0580 IMD Item Description C 25 Not Used 0590 MEA Measurements C 10 Must Use 0600 QTY Quantity C 10 Not Used 0610 ALI Additional Information C 10 Not Used 0620 GIN Goods Identity Number C 100 Not Used 0630 GIR Related Identification Numbers C 100 Not Used 0640 DLM Delivery Limitations C 100 Not Used 0650 DTM Date/Time/Period C 5 Not Used 0660 NAD Name and Address C 5 Not Used 0670 TDT Details of Transport C 1 Not Used 0680 HAN Handling Instructions C 20 Not Used 0690 FTX Free Text C 99 Not Used 0700 MOA Monetary Amount C 5
Must Use 0710 Segment Group 16: RFF-NAD-CTA-DTM C 99 Must Use 0720 RFF Reference M 1 Not Used 0730 NAD Name and Address C 1 Not Used 0740 CTA Contact Information C 1
GM SPO Mexico Guideline
DESADV (D.97A) 11 Revised May 24, 2011
Not Used 0750 DTM Date/Time/Period C 1
Not Used 0760 Segment Group 17: DGS-QTY-FTX C 10 Not Used 0770 DGS Dangerous Goods M 1 Not Used 0780 QTY Quantity C 1 Not Used 0790 FTX Free Text C 5
Not Used 0800 Segment Group 18: LOC-NAD-DTM-QTY C 100 Not Used 0810 LOC Place/Location Identification M 1 Not Used 0820 NAD Name and Address C 1 Not Used 0830 DTM Date/Time/Period C 1 Not Used 0840 QTY Quantity C 10
Not Used 0850 Segment Group 19: SGP-QTY C 1000 Not Used 0860 SGP Split Goods Placement M 1 Not Used 0870 QTY Quantity C 10
Not Used 0880 Segment Group 20: PCI-DTM-MEA-QTY-SG21-SG22
C 9999
Not Used 0890 PCI Package Identification M 1 Not Used 0900 DTM Date/Time/Period C 5 Not Used 0910 MEA Measurements C 10 Not Used 0920 QTY Quantity C 1
Not Used 0930 Segment Group 21: GIN-DLM C 10 Not Used 0940 GIN Goods Identity Number M 1 Not Used 0950 DLM Delivery Limitations C 100
Not Used 0960 Segment Group 22: HAN-FTX-GIN C 10 Not Used 0970 HAN Handling Instructions M 1 Not Used 0980 FTX Free Text C 5 Not Used 0990 GIN Goods Identity Number C 1000
Not Used 1000 Segment Group 23: QVR-DTM C 10 Not Used 1010 QVR Quantity Variances M 1 Not Used 1020 DTM Date/Time/Period C 5
SUMMARY SECTION:
Usage Pos. No.
Seg. ID
Name Req. Des.
Max Use
Group Repeat
Notes
Not Used 1030 CNT Control Total C 5 Must Use 1040 UNT Message Trailer M 1 Must Use 1050 UNZ Interchange Trailer M 1
GM SPO Mexico Guideline
DESADV (D.97A) 12 Revised May 24, 2011
SERVICE SEGMENT DESCRIPTION
Following service segments are as defined by UN/EDIFACT and presented under ISO 9735. The UNB, UNH, UNT and UNZ segments are the envelope of any message, enclosing all the data that is being transmitted.
The UNB (Interchange header) and UNZ (Interchange trailer) segments mark respectively the beginning and the end of an “interchange” (or EDI transmission) thereby providing a unique interchange control reference.
Within the interchange the UNH (message header) and UNT (Message trailer) segments uniquely begin and end the various messages contained in an interchange.
UNB
UNH
MESSAGE 1
UNT
UNH
EXAMPLE OF AN INTERCHANGE STRUCTURE
MESSAGE 2
UNT
...
UNH
MESSAGE N
UNT
UNZ
GM SPO Mexico Guideline
DESADV (D.97A) 13 Revised May 24, 2011
0000 UNB - INTERCHANGE HEADER
Segment Group: none Level: 0
EDIFACT status: mandatory GM status: mandatory
Maximum use: 1 per interchange GM occurrences: 1 per interchange
Function: The UNB is a service segment providing the unique identification of an interchange. It allows the identification of the sender and the receiver of the interchange, gives date and time of preparation as well as the interchange control reference and the application reference.
GM interchange: See remarks.
Example: UNB+UNOA:2+MBXNOSUPPLIER+GMSPOMEX+110315:0735+12++GMDESADV’ A B C D E F G H
EDIFACT STANDARD DEFINITION GM IMPLEMENTATION REF
TAG NAME ST FT SP
ST FT REMARKS
S001 SYNTAX IDENTIFIER M M A 0001 Syntax identifier M a4 : M a4 “UNOA”. B 0002 Syntax version number M n1 + M n1 Indication of the syntax version used
for this message. GM uses EDIFACT syntax version 2
S002 INTERCHANGE SENDER M M C 0004 Sender identification M an..35 : M an..35 Communication code/mailbox number
of the party originating the message. 0007 Identification code qualifier C an..4 : C an..4 Qualifiers to be determined by trading
partner relationship. 0008 Address for Reverse Routing C an..14 +
S003 INTERCHANGE RECIPIENT M M D 0010 Recipient identification M an..35 : M an..35 Communication code/mailbox number
of the party receiving the message. 0007 Identification code qualifier C an..4 : C an..4 Qualifiers to be determined by trading
partner relationship. 0014 Routing address C an..14 +
S004 DATE / TIME OF PREPARATION
M M
E 0017 Date of preparation M n6 : M n6 YYMMDD format F 0019 Time of preparation M n4 + M n4 HHMM format
G 0020 INTERCHANGE CONTROL REFERENCE
M an..14 + M an..14 For structure of the ICR number used by GM see COMMENTS below. The ICR number is UNIQUE within an inventory year.
S005 RECIPIENTS REFERENCE PASSWORD
C
0022 Recipient's reference / password
M an..14 :
0025 Recipient's reference / password qualifier
C an2 +
GM SPO Mexico Guideline
DESADV (D.97A) 14 Revised May 24, 2011
H 0026 APPLICATION REFERENCE C an..14 + C an..14 “GMDELJIT”. See also comments below.
0029 PROCESSING PRIORITY CODE C a1 +
0031 ACKNOWLEDGEMENT REQUEST
C n1 +
0032 COMMUNICATIONS AGREEMENT ID
C an..35 +
0035 TEST INDICATOR C n1 '
COMMENTS
0020 - Interchange Control Reference
The Interchange Control Reference number used by General Motors is a sequence number representing interchanges between a given GM
Sender ID (0004) and a given Receiver ID (0010). The first number in the sequence is generally 2000000. ICRs at the interchange level are not
reset annually.
0026 - Application Reference
The GM standard filename will be transmitted.
GM SPO Mexico Guideline
DESADV (D.97A) 15 Revised May 24, 2011
0010 UNH - MESSAGE HEADER
Segment group: none Level: 0 EDIFACT status: mandatory. GM status: mandatory. Maximum use: 1 per message. GM occurrences: 1 per message. Function: UNH is a ervice segment starting and uniquely identifying a message. The message type code for
the Delivery Just In Time message is DELJIT. GM interchange: see remarks. Example: UNH+1+DASADV:D:97A:UN’ A B C D E
EDIFACT STANDARD DEFINITION GM IMPLEMENTATION REF
TAG NAME ST FT SP ST FT REMARKS
A 0062 MESSAGE REFERENCE NUMBER M an..14 + M an..14 Message Control number assigned by the sender to the message. See comments below.
S009 MESSAGE IDENTIFIER M M B 0065 Message type M an..6 : M an..6 “DELJIT”. C 0052 Message version number M an..3 : M an..3 “D”. D 0054 Message release number M an..3 : M an..3 “97A”. E 0051 Controlling agency M an..2 : M an..2 “UN”. 0057 Association assigned code C an..6 +
0068 COMMON ACCESS REFERENCE C an..35 + M An…35
S010 STATUS OF TRANSFER C 0070 Sequence of transfer M n..2 : 0073 First and last transfer C a1 ‘
COMMENTS 0062 - Message Reference Number The Message Reference number used by General Motors is structured as follows: First message: 1 Second message: 2 Up to: 9999
GM SPO Mexico Guideline
DESADV (D.97A) 16 Revised May 24, 2011
500 UNT - MESSAGE TRAILER
Segment group: none Level: 0 EDIFACT status: mandatory GM status: mandatory Maximum use: 1 per message GM occurrences: 1 per message Function: service segment ending a message, giving the total number of segments in the message and the control reference number of the message. GM interchange: see remarks. Example: UNT+99+1’ A B
EDIFACT STANDARD DEFINITION GM IMPLEMENTATION REF
TAG NAME ST FT SP ST FT REMARKS
A 0074 NUMBER OF SEGMENTS IN THE MESSAGE
M n..6 M n..6 Control count of the number of segments in the message, including UNH and UNT.
B 0062 MESSAGE REFERENCE NUMBER M an..14 M an..14 Number must be identical to UNH - tag 0062
GM SPO Mexico Guideline
DESADV (D.97A) 17 Revised May 24, 2011
510 UNZ - INTERCHANGE TRAILER
Segment Group: none Level: 0 EDIFACT status: mandatory GM status: mandatory Maximum use: 1 GM occurrences: 1 per interchange Function: service segment ending an interchange and giving the number of messages contained in the interchange as well as the Interchange Control Reference number. GM interchange: see remarks. Example: UNZ+1+12’ A B
EDIFACT STANDARD DEFINITION GM IMPLEMENTATION REF
TAG NAME ST FT SP ST FT REMARKS
A 0036 INTERCHANGE CONTROL COUNT M n..6 + M n..6 Number of messages in an interchange.
B 0020 INTERCHANGE CONTROL REFERENCE M an..14 ‘ M an..14 Value must be the same as 0020 - Interchange Control Reference in UNB.
GM SPO Mexico Guideline
DESADV (D.97A) 18 Revised May 24, 2011
DATA SEGMENTS DESCRIPTION
This part includes only the segments defined in the standard and used in the subset exchanged
between SPOM and its Trading Partners. The segments are described in the same sequence as
they appear in the message.
SEGMENT: BGM BEGINNING OF MESSAGE
Position: 0020 Group: Level: 0 Usage: Mandatory Max Use: 1 Purpose: To indicate the type and function of a message and to transmit the identifying number. Syntax Notes: Semantic Notes: Comments: Notes: This segment identifies the business practice established by the trading partners as
defined by component element 1000. BGM+351+10000001+9' BGM 02 (C1006 1004) contains serial value as Shipper. BGM+351+IN330303+9' Mexican vendors are requested to use invoice number as Shipper in BGM 02 (C1006 1004).
Data Element Summary
Data Component Usage Element Element Name Attributes C002 DOCUMENT/MESSAGE NAME C Identification of a type of document/message by code or name. Code preferred. >> 1001 Document/message name, coded C an..3 Document/message identifier expressed in code. 351 Despatch advice Document/message by means of which the seller or
consignor informs the consignee about the despatch of goods.
X 1131 Code list qualifier C an..3 Identification of a code list. Refer to D.97A Data Element Dictionary for acceptable code values. X 3055 Code list responsible agency, coded C an..3 Code identifying the agency responsible for a code list. Refer to D.97A Data Element Dictionary for acceptable code values. X 1000 Document/message name C an..35 Plain language identifier specifying the function of a document/message. >> C106 DOCUMENT/MESSAGE IDENTIFICATION C
GM SPO Mexico Guideline
DESADV (D.97A) 19 Revised May 24, 2011
Identification of a document/message by its number and eventually its version or revision.
>> 1004 Document/message number C an..35 Reference number assigned to the document/message by the issuer. A unique control number, commonly called a Shipment Identification Number
(SID) or “shipper”, assigned by the original shipper to identify a specific shipment. This unique control number cannot be repeated within a one year period. This number must be referenced on both the packing list and the bill of lading as the Shipment Identification Number (SID). Note: Vendors located in Mexico are requested to use their invoice number as the Shipment Identification Number.
X 1056 Version C an..9 To specify the version number or name of an object. X 1060 Revision number C an..6 To specify a revision number. 1225 MESSAGE FUNCTION, CODED C an..3 Code indicating the function of the message. 9 Original Initial transmission related to a given transaction. The issuer's first transmission of a message for a
particular SID (1004). X 4343 RESPONSE TYPE, CODED C an..3 Code specifying the type of acknowledgment required or transmitted. Refer to D.97A Data Element Dictionary for acceptable code values.
GM SPO Mexico Guideline
DESADV (D.97A) 20 Revised May 24, 2011
SEGMENT: DTM DATE/TIME/PERIOD
Position: 0030 Group: Level: 1 Usage: Mandatory Max Use: 2 Purpose: To specify date, and/or time, or period. Syntax Notes: Semantic Notes: Comments: Notes: Three iterations of the DTM are mandatory to specify:
The message issue date using code 137 in component element 2005,
The date and time of the shipment.
The expected delivery date. DTM+137:201103150130:203' DTM+11:201103121500:203' DTM+132:20110404:102’
Data Element Summary
Data Component Usage Element Element Name Attributes >> C507 DATE/TIME/PERIOD M Date and/or time, or period relevant to the specified date/time/period type. >> 2005 Date/time/period qualifier M an..3 Code giving specific meaning to a date, time or period. Three iterations of the DTM segment are mandatory, using codes 11 , 132, 137. 11 Despatch date and or time (2170) Date/time on which the goods are or are expected
to be despatched or shipped. 137 Document/message date/time (2006) Date/time when a document/message is issued. 132 Arrival Date/time, estimated (2348) Date/time when carrier estimates that a means of
transport should arrive at the port of discharge or place of destination.
>> 2380 Date/time/period C an..35 The value of a date, a date and time, a time or of a period in a specified
representation. >> 2379 Date/time/period format qualifier C an..3 Specification of the representation of a date, a date and time or of a period. 102 CCYYMMDD 203 CCYYMMDDHHMM Calendar date including time with minutes: C=Century;
Y=Year; M=Month; D=Day; H=Hour; M=Minutes.
GM SPO Mexico Guideline
DESADV (D.97A) 21 Revised May 24, 2011
SEGMENT: MEA MEASUREMENTS
Position: 0050
Group: Level: 1 Usage: Conditional (Required) Max Use: 5 Purpose: To specify physical measurements, including dimension tolerances, weights and counts. Dependency Notes: Semantic Notes: Comments:
Notes: Two iterations of the MEA are required to indicate number of lading units and the weight
of the shipment: MEA+AAX+G+LBR:500' MEA+AAX+SQ+C62:6'
Data Element Summary
Data Component Usage Element Element Name Attributes >> 6311 MEASUREMENT PURPOSE QUALIFIER M an..3 Specification of the purpose of the measurement. AAX Consignment measurement Measurement related to a consignment; to be specified by
the measurement code dimension value. C502 MEASUREMENT DETAILS C Identification of measurement type. >> 6313 Property measured, coded C an..3 Specification of the property measured. G Gross weight [6292] Weight (mass) of goods including packing but
excluding the carrier's equipment. N Actual net weight SQ Shipped quantity X 6321 Measurement significance, coded C an..3 Code specifying the significance of a measurement value. Refer to D.97A Data Element Dictionary for acceptable code values. X 6155 Measurement attribute identification C an..17 Code used to specify non-discrete measurement values. Refer to D.97A Data Element Dictionary for acceptable code values. X 6154 Measurement attribute C an..70 To specify non-discrete measurement values. C174 VALUE/RANGE C Measurement value and relevant minimum and maximum tolerances in that
order. >> 6411 Measure unit qualifier M an..3 Indication of the unit of measurement in which weight (mass), capacity, length,
area, volume or other quantity is expressed.
GM SPO Mexico Guideline
DESADV (D.97A) 22 Revised May 24, 2011
See UN/ECE Trade Recommendation 20. GM will accept the following: KGM- kilograms LBR - pounds C62 - pieces
>> 6314 Measurement value C an..18 Value of the measured unit. SPO accepts numeric values only. NO decimals will be accepted. X 6162 Range minimum C n..18 Minimum of a range. X 6152 Range maximum C n..18 Maximum of a range. X 6432 Significant digits C n..2 To specify the number of significant digits. X 7383 SURFACE/LAYER INDICATOR, CODED C an..3 Code indicating the surface or layer of a product that is being described. Refer to D.97A Data Element Dictionary for acceptable code values.
GM SPO Mexico Guideline
DESADV (D.97A) 23 Revised May 24, 2011
GROUP: RFF SEGMENT GROUP 1: REFERENCE
Position: 0070 Group: Level: 1 Usage: Conditional (Optional) Max Use: 10 (1) Purpose:
Segment Summary
Pos. Seg. Req. Max. Group:
Usage No. ID Name Des. Use Repeat
Must Use 0080 RFF Reference M 1
GM SPO Mexico Guideline
DESADV (D.97A) 24 Revised May 24, 2011
SEGMENT: RFF REFERENCE
Position: 0080 (Trigger Segment)
Group: Segment Group 1 (Reference) Conditional (Optional)
Level: 1
Usage: Mandatory
Max Use: 1
Purpose: To specify a reference.
Dependency Notes:
Semantic Notes:
Comments:
Notes: A single iteration is requested to provide a carrier’s identifier for the entire
consigmment. Acceptable codes are listed in the Summary.
RFF+CN:DW12345'
Data Element Summary
Data Component
Usage Element Element Name Attributes
>> C506 REFERENCE M Identification of a reference. >> 1153 Reference qualifier M an..3 Code giving specific meaning to a reference segment or a reference number. CN Carrier's reference number Reference number assigned by carrier to a consignment. AWB Air Waybill Number BM Bill of Lading Number MB Master Bill of Lading Number FN Freight Bill Number 1154 Reference number C an..35 Identification number the nature and function of which can be qualified by an
entry in data element 1153 Reference qualifier. X 1156 Line number C an..6 Number of the line in the document/message referenced in 1154 Reference
number. X 4000 Reference version number C an..35 To uniquely identify a reference by its revision number.
GM SPO Mexico Guideline
DESADV (D.97A) 25 Revised May 24, 2011
GROUP: NAD SEGMENT GROUP 2: NAME AND ADDRESS
Position: 0100
Group:
Level: 1
Usage: Conditional (Required)
Max Use: 10
Purpose:
Segment Summary
Pos. Seg. Req. Max. Group:
Usage No. ID Name Des. Use Repeat
Must Use 0110 NAD Name and Address M 1
0120 LOC Place/Location Identification C 10
GM SPO Mexico Guideline
DESADV (D.97A) 26 Revised May 24, 2011
SEGMENT: NAD NAME AND ADDRESS
Position: 0110 (Trigger Segment)
Group: Segment Group 2 (Name and Address) Conditional (Required)
Level: 1
Usage: Mandatory
Max Use: 1
Purpose: To specify the name/address and their related function, either by CO82 only and/or
unstructured by CO58 or structured by CO80 thru 3207.
Dependency Notes:
Semantic Notes:
Comments:
Notes: Stock, Air Stock, and VIP Orders: Where the vendor originates the ASN, three iterations are required to specify all parties involved (MI, SU, and ST). Detailed address information should be included for ship to party. NAD+MI+23763::92++GM SPOM' NAD+ST+7080::92++ GENERAL MOTORS DE MEXICO - SPOM: SERVICE PARTS OPERATIONS+ AV. INDUSTRIA MINERA 700 : FRACCIONAMIENTO INDUSTRIAL+TOLUCA++ CP 50000+MX' NAD+SU+111222333::16++GM SPOM Supplier Name' Where the freight forwarder originates the ASN, four iterations are required to specify all parties involved (FW, MI, SU, and ST). Detailed address information should be included for ship to party. NAD+MI+23763::92++GM SPOM' NAD+ST+7080::92++ GENERAL MOTORS DE MEXICO - SPOM: SERVICE PARTS OPERATIONS+ AV. INDUSTRIA MINERA 700 : FRACCIONAMIENTO INDUSTRIAL+TOLUCA++ CP 50000+MX' NAD+SU+111222333::16++GM SPOM Supplier Name' NAD+FW+++Freight Forwarder Name’ Ship Direct and VIP Ship Direct orders: Up to three iterations used to specify all parties involved (SI, SU, and UD). Detailed address information should be included for ship to party. NAD+SI+23763::92++SPOM' NAD+SU+111222333::16++ GM SPOM Supplier Name' NAD+UD+509033::86++Bachman Chevrolet Inc:Attn Parts Manager+9650 Bluegrass
Pky+Louisville+KY+402991900+US'
Data Element Summary
GM SPO Mexico Guideline
DESADV (D.97A) 27 Revised May 24, 2011
Data Component
Usage Element Element Name Attributes
>> 3035 PARTY QUALIFIER M an..3 Code giving specific meaning to a party. MI Planning schedule/material release issuer GM SPO Mexico - 23763 ST Ship to For Stock orders, identification of the Purchasing party’s
address to where goods will be or have been shipped. UD Ultimate Destination For Ship Direct orders, identification of the third party to
where goods will be or have been shipped. SU Supplier (3280) Party which manufactures or otherwise has
possession of goods, and consigns or makes them available in trade.
FW Freight forwarder. Regionally-assigned party which assembles the shipment and assigns to carrier for forwarding to SPO Mexico.
>> C082 PARTY IDENTIFICATION DETAILS C Identification of a transaction party by code. >> 3039 Party id. identification M an..35 Code identifying a party involved in a transaction. Note: Not required when NAD 01 = “FW”. X 1131 Code list qualifier C an..3 Identification of a code list. Refer to D.97A Data Element Dictionary for acceptable code values. >> 3055 Code list responsible agency, coded C an..3 Code identifying the agency responsible for a code list. 16 DUNS (Dun & Bradstreet) 92 Assigned by buyer or buyer's agent Note: Not required when NAD 01 = “FW”. X C058 NAME AND ADDRESS C Unstructured name and address: one to five lines. X 3124 Name and address line M an..35 Free form name and address description. X 3124 Name and address line C an..35 Free form name and address description. X 3124 Name and address line C an..35 Free form name and address description. X 3124 Name and address line C an..35 Free form name and address description. X 3124 Name and address line C an..35 Free form name and address description. >> C080 PARTY NAME C Identification of a transaction party by name, one to five lines. Party name may
be formatted. >> 3036 Party name M an..35 Name of a party involved in a transaction. 3036 Party name C an..35
GM SPO Mexico Guideline
DESADV (D.97A) 28 Revised May 24, 2011
Name of a party involved in a transaction. X 3036 Party name C an..35 Name of a party involved in a transaction. X 3036 Party name C an..35 Name of a party involved in a transaction. X 3036 Party name C an..35 Name of a party involved in a transaction. X 3045 Party name format, coded C an..3 Specification of the representation of a party name. Refer to D.97A Data Element Dictionary for acceptable code values. C059 STREET C Street address and/or PO Box number in a structured address: one to three
lines. 3042 Street and number/p.o. box M an..35 Street and number in plain language, or Post Office Box No. 3042 Street and number/p.o. box C an..35 Street and number in plain language, or Post Office Box No. X 3042 Street and number/p.o. box C an..35 Street and number in plain language, or Post Office Box No. X 3042 Street and number/p.o. box C an..35 Street and number in plain language, or Post Office Box No. 3164 CITY NAME C an..35 Name of a city (a town, a village) for addressing purposes. 3229 COUNTRY SUB-ENTITY IDENTIFICATION C an..9 Identification of the name of sub-entities (state, province) defined by
appropriate governmental agencies. 3251 POSTCODE IDENTIFICATION C an..9 Code defining postal zones or addresses. 3207 COUNTRY, CODED C an..3 Identification of the name of a country or other geographical entity as specified
in ISO 3166.
GM SPO Mexico Guideline
DESADV (D.97A) 29 Revised May 24, 2011
SEGMENT: LOC PLACE/LOCATION IDENTIFICATION
Position: 0120
Group: Segment Group 2 (Name and Address) Conditional
Level: 2
Usage: Conditional
Max Use: 10
Purpose: To identify a country/place/location/related location one/related location two.
Dependency Notes:
Semantic Notes:
Comments:
Notes: Reserved for future use. Not expected or required as of Version 1 of this guideline.
LOC+11+:::PACKAGED DOCK'
Data Element Summary
Data Component
Usage Element Element Name Attributes
>> 3227 PLACE/LOCATION QUALIFIER M an..3 Code identifying the function of a location. 11 Place/port of discharge (3392 + 3414) Seaport, airport, freight terminal, rail station
or other place at which the goods (cargo) are unloaded from the means of transport having been used for their carriage.
Dock code C517 LOCATION IDENTIFICATION C Identification of a location by code or name. 3225 Place/location identification C an..25 Identification of the name of place/location, other than 3164 City name. Dock code transmitted in DELJIT. X 1131 Code list qualifier C an..3 Identification of a code list. Refer to D.97A Data Element Dictionary for acceptable code values. X 3055 Code list responsible agency, coded C an..3 Code identifying the agency responsible for a code list. Refer to D.97A Data Element Dictionary for acceptable code values. 3224 Place/location C an..70 Dock Name transmitted in DELJIT PACKAGED DOCK
NON-PACKAGED DOCK X C519 RELATED LOCATION ONE IDENTIFICATION C Identification the first related location by code or name. X 3223 Related place/location one identification C an..25 Specification of the first related place/location by code. X 1131 Code list qualifier C an..3
GM SPO Mexico Guideline
DESADV (D.97A) 30 Revised May 24, 2011
Identification of a code list. Refer to D.97A Data Element Dictionary for acceptable code values. X 3055 Code list responsible agency, coded C an..3 Code identifying the agency responsible for a code list. Refer to D.97A Data Element Dictionary for acceptable code values. X 3222 Related place/location one C an..70 Specification of the first related place/location by name. X C553 RELATED LOCATION TWO IDENTIFICATION C Identification of second related location by code or name. X 3233 Related place/location two identification C an..25 Specification of a second related place/location by code. X 1131 Code list qualifier C an..3 Identification of a code list. Refer to D.97A Data Element Dictionary for acceptable code values. X 3055 Code list responsible agency, coded C an..3 Code identifying the agency responsible for a code list. Refer to D.97A Data Element Dictionary for acceptable code values. X 3232 Related place/location two C an..70 Specification of a second related place/location by name. X 5479 RELATION, CODED C an..3 To specify the relationship between two or more items.
GM SPO Mexico Guideline
DESADV (D.97A) 31 Revised May 24, 2011
GROUP: TDT SEGMENT GROUP 6: DETAILS OF TRANSPORT
Position: 0230
Group:
Level: 1
Usage: Conditional (Required)
Max Use: 10
Purpose:
Segment Summary
Pos. Seg. Req. Max. Group:
No. ID Name Des. Use Repeat
Must Use 0240 TDT Details of Transport M 1
GM SPO Mexico Guideline
DESADV (D.97A) 32 Revised May 24, 2011
SEGMENT: TDT DETAILS OF TRANSPORT
Position: 0240 (Trigger Segment)
Group: Segment Group 6 (Details of Transport) Conditional (Required)
Level: 1
Usage: Mandatory
Max Use: 1
Purpose: To specify the transport details such as mode of transport, means of transport, its
conveyance reference number and the identification of the means of transport. The
segment may be pointed to by the TPL segment.
Dependency Notes:
Semantic Notes:
Comments:
Notes: TDT+12++M++:::TOMS TRUCKING'
Data Element Summary
Data Component
Element Element Name Attributes
>> 8051 TRANSPORT STAGE QUALIFIER M an..3 Qualifier giving a specific meaning to the transport details. 12 At departure Transport by which goods are moved from the place of
departure. 25 Delivery carrier all transport Carrier responsible from the point of origin to the final
delivery destination. X 8028 CONVEYANCE REFERENCE NUMBER C an..17 Unique reference given by the carrier to a certain journey or departure of a
means of transport (generic term). >> C220 MODE OF TRANSPORT C Method of transport code or name. Code preferred. 8067 Mode of transport, coded C an..3 Coded method of transport used for the carriage of the goods. Use codes from X12 Data Element 91
A Air M Motor (Common Carrier) R Rail S Ocean U Private Parcel Service
X 8066 Mode of transport C an..17 Method of transport used for the carriage of the goods. X C228 TRANSPORT MEANS C Code and/or name identifying the type of means of transport. X 8179 Type of means of transport identification C an..8 Code defining the type of the means of transport being utilized. Refer to D.97A Data Element Dictionary for acceptable code values.
GM SPO Mexico Guideline
DESADV (D.97A) 33 Revised May 24, 2011
X 8178 Type of means of transport C an..17 Description of the type of the means of transport being utilized. C040 CARRIER C Identification of a carrier by code and/or by name. Code preferred. 3127 Carrier identification C an..17 Identification of party undertaking or arranging transport of goods between
named points. The Standard Carrier Alpha Code (SCAC) or GMSPO assigned code. X 1131 Code list qualifier C an..3 Identification of a code list. Refer to D.97A Data Element Dictionary for acceptable code values. 3055 Code list responsible agency, coded C an..3 Code identifying the agency responsible for a code list. 182 US, Standard Carrier Alpha Code (Motor) Organisation maintaining the SCAC lists and transportation
operating in North America. >> 3128 Carrier name C an..35 Name of party undertaking or arranging transport of goods between named
points. X 8101 TRANSIT DIRECTION, CODED C an..3 Identification of the point of origin and point of direction. Refer to D.97A Data Element Dictionary for acceptable code values. X C401 EXCESS TRANSPORTATION INFORMATION C To provide details of reason for, and responsibility for, use of transportation
other than normally utilized. X 8457 Excess transportation reason, coded M an..3 Indication of reason for excess transportation. X 8459 Excess transportation responsibility, coded M an..3 Indication of responsibility for excess transportation. X 7130 Customer authorization number C an..17 Customer provided authorization number to allow supplier to ship goods under
specific freight conditions. This number will be transmitted back to customer in the dispatch advice message.
X C222 TRANSPORT IDENTIFICATION C Code and/or name identifying the means of transport. X 8213 Id. of means of transport identification C an..9 Identification of the means of transport by name or number. X 1131 Code list qualifier C an..3 Identification of a code list. Refer to D.97A Data Element Dictionary for acceptable code values. X 3055 Code list responsible agency, coded C an..3 Code identifying the agency responsible for a code list. Refer to D.97A Data Element Dictionary for acceptable code values. X 8212 Id. of the means of transport C an..35 Identification of the means of transport by name or number. X 8453 Nationality of means of transport, coded C an..3 Coded name of the country in which a means of transport is registered. X 8281 TRANSPORT OWNERSHIP, CODED C an..3 Code indicating the ownership of the means of transport. Refer to D.97A Data Element Dictionary for acceptable code values.
GM SPO Mexico Guideline
DESADV (D.97A) 34 Revised May 24, 2011
GROUP: EQD SEGMENT GROUP 8: EQUIPMENT DETAILS
Position: 0290
Group:
Level: 1
Usage: Conditional
Max Use: 10
Purpose: An EQD loop should be included for stock or ship direct orders that will be through
delivered in an identifiable container or trailer. It is not required for orders where a
parcel or box is handled by an Air Express or Package Service.
Segment Summary
Pos. Seg. Req. Max. Group:
Usage No. ID Name Des. Use Repeat
Must Use 0300 EQD Equipment Details M 1
GM SPO Mexico Guideline
DESADV (D.97A) 35 Revised May 24, 2011
SEGMENT: EQD EQUIPMENT DETAILS
Position: 0300 (Trigger Segment)
Group: Segment Group 8 (Equipment Details) Conditional (Required)
Level: 1
Usage: Mandatory
Max Use: 1
Purpose: To identify a unit of equipment.
Dependency Notes:
Semantic Notes:
Comments:
Notes: EQD+CN+SLI987'
Data Element Summary
Data Component
Usage Element Element Name Attributes
>> 8053 EQUIPMENT QUALIFIER M an..3 Code identifying type of equipment. CN Container Equipment item as defined by ISO for transport. It must
be of: A) permanent character, strong enough for repeated use; B) designed to facilitate the carriage of goods, by one or more modes of transport, without intermediate reloading; C) fitted with devices for its ready handling, particularly.
RR Rail Car [8320] Registered identification number of railway wagon
(CIM 19). TE Trailer A vehicle without motive power, designed for the carriage
of cargo and to be towed by a motor vehicle. C237 EQUIPMENT IDENTIFICATION C Marks (letters and/or numbers) identifying equipment used for transport such
as a container. >> 8260 Equipment identification number C an..17 Marks (letters and/or numbers) which identify equipment e.g. unit load device. Used to identify equipment number, such as railcar or trailer number including
initials. X 1131 Code list qualifier C an..3 Identification of a code list. Refer to D.97A Data Element Dictionary for acceptable code values. X 3055 Code list responsible agency, coded C an..3 Code identifying the agency responsible for a code list. Refer to D.97A Data Element Dictionary for acceptable code values. X 3207 Country, coded C an..3
GM SPO Mexico Guideline
DESADV (D.97A) 36 Revised May 24, 2011
Identification of the name of a country or other geographical entity as specified in ISO 3166.
X C224 EQUIPMENT SIZE AND TYPE C Code and/or name identifying size and type of equipment used in transport.
Code preferred. X 8155 Equipment size and type identification C an..10 Coded description of the size and type of equipment e.g. unit load device. X 1131 Code list qualifier C an..3 Identification of a code list. Refer to D.97A Data Element Dictionary for acceptable code values. X 3055 Code list responsible agency, coded C an..3 Code identifying the agency responsible for a code list. Refer to D.97A Data Element Dictionary for acceptable code values. X 8154 Equipment size and type C an..35 Plain language description of the size and type of equipment e.g. unit load
device. X 8077 EQUIPMENT SUPPLIER, CODED C an..3 To indicate the party that is the supplier of the equipment. Refer to D.97A Data Element Dictionary for acceptable code values. X 8249 EQUIPMENT STATUS, CODED C an..3 Indication of the action related to the equipment. Refer to D.97A Data Element Dictionary for acceptable code values. X 8169 FULL/EMPTY INDICATOR, CODED C an..3 To indicate the extent to which the equipment is full or empty. Refer to D.97A Data Element Dictionary for acceptable code values.
GM SPO Mexico Guideline
DESADV (D.97A) 37 Revised May 24, 2011
GROUP: CPS SEGMENT GROUP 10: CONSIGNMENT PACKING SEQUENCE
Position: 0370
Group:
Level: 1
Usage: Conditional (Required)
Max Use: 9999
Purpose:
Segment Summary
Pos. Seg. Req. Max. Group:
Usage No. ID Name Des. Use Repeat
Must Use 0380 CPS Consignment Packing Sequence M 1
Must Use 0400 Segment Group 11: Package C 9999
Must Use
0550 Segment Group 15: Line Item C 9999
GM SPO Mexico Guideline
DESADV (D.97A) 38 Revised May 24, 2011
SEGMENT: CPS CONSIGNMENT PACKING SEQUENCE
Position: 0380 (Trigger Segment)
Group: Segment Group 10 (Consignment Packing Sequence) Conditional (Required)
Level: 1
Usage: Mandatory
Max Use: 1
Purpose: To identify the sequence in which physical packing is presented in the consignment, and
optionally to identify the hierarchical relationship between packing layers.
Dependency Notes:
Semantic Notes:
Comments:
Notes: CPS+1++3' < -- An outermost Lading Unit that contains other packages that contain the
pieces specified in the associated line item. The actual external identifier for the lading
Unit is given in the RFF Segment in Segment Group 13.
CPS+1++4' < -- An outermost Lading Unit directly contains all the pieces specified in the
associated line item. The actual external identifier for the lading Unit is given in the RFF
Segment in Segment Group 13.
Note that Part Numbers can be split into multiple Lading Units (Multiple CPS / LIN / QTY
occurrences) if there is more than one outermost container for a Part Number.
Data Element Summary
Data Component
Usage Element Element Name Attributes
>> 7164 HIERARCHICAL ID. NUMBER M an..12 A unique number assigned by the sender to identify a level within a hierarchical
structure. A serial number representing a lading unit, or highest level box, package, or
pallet in the shipment (or highest within the container identified in the EQD segment. Value should begin with the number 1 and increment by one for each occurrence within the message. Numbers are not to be repeated within the same message. This is only a serial value. The actual external identifier for the lading Unit is given in the RFF Segment in Segment Group 13.
X 7166 HIERARCHICAL PARENT ID. C an..12 Identification number of the next higher hierarchical data segment in a
hierarchical structure. >> 7075 PACKAGING LEVEL, CODED C an..3 Indication of level of packaging specified. 3 Outer For packed merchandise, outermost level of packaging for
a shipment.
GM SPO Mexico Guideline
DESADV (D.97A) 39 Revised May 24, 2011
Use value 3 when the lading unit specified by Data Element 7164 contains additional packing units that together contain all the pieces specified in the associated line item.
4 No packaging hierarchy Use value 4 when the lading unit specified by Data Element
7164 directly contains all the pieces specified by the associated line item.
GM SPO Mexico Guideline
DESADV (D.97A) 40 Revised May 24, 2011
GROUP: PAC SEGMENT GROUP 11: PACKAGE
Position: 0400
Group: Segment Group 10 (Consignment Packing Sequence) Conditional (Required)
Level: 2
Usage: Mandatory
Max Use: 9999
Purpose:
Segment Summary
Pos. Seg. Req. Max. Group:
Usage No. ID Name Des. Use Repeat
Must Use 0410 PAC Package M 1
Must Use 0470 Segment Group 13: Package Identification C 1000
GM SPO Mexico Guideline
DESADV (D.97A) 41 Revised May 24, 2011
SEGMENT: PAC PACKAGE
Position: 0410 (Trigger Segment)
Group: Segment Group 11 (Package) Conditional (Optional)
Level: 2
Usage: Mandatory
Max Use: 1
Purpose: To describe the number and type of packages/physical units.
Dependency Notes:
Semantic Notes:
Comments:
Notes: The PAC segment is a mandatory trigger segment for Segment Group 13. The two
usages are:
a) A “Zero” case.
Example: PAC+0' < -- Used when CPS 03 = “4”.
b) A non-zero case.
Example: PAC+16’ , -- Used when CPS 03 = “3”
Data Element Summary
Data Component
Usage Element Element Name Attributes
>> 7224 NUMBER OF PACKAGES C n..8 Used to indicate the number of packages comprising the associated line item
within the outermost lading unit represented by the parent CPS Segment. Should be “0” if CPS 03 = “4”.
X C531 PACKAGING DETAILS C Packaging level and details, terms and conditions. X 7075 Packaging level, coded C an..3 Indication of level of packaging specified. X 7233 Packaging related information, coded C an..3 Code giving packaging, handling and marking related information. Refer to D.97A Data Element Dictionary for acceptable code values. X 7073 Packaging terms and conditions, coded C an..3 Code identifying packaging terms and conditions. X C202 PACKAGE TYPE C Type of package by name or by code from a specified source. X 7065 Type of packages identification C an..17 Coded description of the form in which goods are presented. X 1131 Code list qualifier C an..3 Identification of a code list. Refer to D.97A Data Element Dictionary for acceptable code values. X 3055 Code list responsible agency, coded C an..3 Code identifying the agency responsible for a code list. X 7064 Type of packages C an..35 Description of the form in which goods are presented.
GM SPO Mexico Guideline
DESADV (D.97A) 42 Revised May 24, 2011
X C402 PACKAGE TYPE IDENTIFICATION C Identification of the form in which goods are described. X 7077 Item description type, coded C an..3 Code indicating the format of a description. Refer to D.97A Data Element Dictionary for acceptable code values. X 7064 Type of packages C an..35 Description of the form in which goods are presented. X 7143 Item number type, coded C an..3 Identification of the type of item number. Refer to D.97A Data Element Dictionary for acceptable code values. X 7064 Type of packages C an..35 Description of the form in which goods are presented. X 7143 Item number type, coded C an..3 Identification of the type of item number. Refer to D.97A Data Element Dictionary for acceptable code values. X C532 RETURNABLE PACKAGE DETAILS C Indication of responsibility for payment and load contents of returnable
packages. X 8395 Returnable package freight payment responsibility, coded C an..3 To indicate responsibility for payment of return freight charges for packaging
that is returnable. Refer to D.97A Data Element Dictionary for acceptable code values. X 8393 Returnable package load contents, coded C an..3 To indicate the composition of goods loaded into a returnable package. Refer to D.97A Data Element Dictionary for acceptable code values.
GM SPO Mexico Guideline
DESADV (D.97A) 43 Revised May 24, 2011
GROUP: PCI SEGMENT GROUP 13: PACKAGE IDENTIFICATION
Position: 0470
Group: Segment Group 11 (Package) Conditional (Optional)
Level: 3
Usage: Conditional (Optional)
Max Use: 1000
Purpose:
Segment Summary
Pos. Seg. Req. Max. Group:
Usage No. ID Name Des. Use Repeat
Must Use 0480 PCI Package Identification M 1
Must Use 0490 RFF Reference C 1
GM SPO Mexico Guideline
DESADV (D.97A) 44 Revised May 24, 2011
SEGMENT: PCI PACKAGE IDENTIFICATION
Position: 0480 (Trigger Segment)
Group: Segment Group 13 (Package Identification) Conditional (Optional)
Level: 3
Usage: Mandatory
Max Use: 1
Purpose: To specify markings and labels on individual packages or physical units.
Dependency Notes:
Semantic Notes:
Comments:
Notes: The purpose of the PCI Segment in this guidelines is to serve as the EDIFACT-required
trigger for the following RFF segment. The code value “16” has no specific meaning in
version 1 of this guidelines, but serves as a placeholder for marking instructions that
may be issued at a future time.
PCI+16'
Data Element Summary
Data Component
Element Element Name Attributes
>> 4233 MARKING INSTRUCTIONS, CODED C an..3 Code indicating instructions on how specified packages or physical units should
be marked. 16 Buyer's instructions X C210 MARKS & LABELS C Shipping marks on packages in free text; one to ten lines. X 7102 Shipping marks C an..35 Marks and numbers identifying individual packages. X 7102 Shipping marks C an..35 Marks and numbers identifying individual packages. X 7102 Shipping marks C an..35 Marks and numbers identifying individual packages. X 7102 Shipping marks C an..35 Marks and numbers identifying individual packages. X 7102 Shipping marks C an..35 Marks and numbers identifying individual packages. X 7102 Shipping marks C an..35 Marks and numbers identifying individual packages. X 7102 Shipping marks C an..35 Marks and numbers identifying individual packages. X 7102 Shipping marks C an..35 Marks and numbers identifying individual packages. X 7102 Shipping marks C an..35 Marks and numbers identifying individual packages.
GM SPO Mexico Guideline
DESADV (D.97A) 45 Revised May 24, 2011
X 7102 Shipping marks C an..35 Marks and numbers identifying individual packages. X 8275 CONTAINER/PACKAGE STATUS, CODED C an..3 Code to identify whether goods of separate description or comprising separate
consignments are contained in the same external packaging or to indicate that a container or similar unit load device is empty.
Refer to D.97A Data Element Dictionary for acceptable code values. X C827 TYPE OF MARKING C Specification of the type of marking that reflects the method that was used and
the conventions adhered to for marking (e.g. of packages). X 7511 Type of marking, coded C an..3 To specify the type of marking that reflects the method and the conventions
adhered to for marking. X 1131 Code list qualifier C an..3 Identification of a code list. Refer to D.97A Data Element Dictionary for acceptable code values. X 3055 Code list responsible agency, coded C an..3 Code identifying the agency responsible for a code list. Refer to D.97A Data Element Dictionary for acceptable code values.
GM SPO Mexico Guideline
DESADV (D.97A) 46 Revised May 24, 2011
SEGMENT: RFF REFERENCE
Position: 0490
Group: Segment Group 13 (Package Identification) Conditional (Optional)
Level: 4
Usage: Conditional (Required)
Max Use: 1
Purpose: To specify a reference.
Dependency Notes:
Semantic Notes:
Comments:
Notes: Conditional for Materials Management.
RFF+CW:5678' < -- for Stock orders, External Identifier of Lading Unit represented by
the parent CPS segment.
RFF+CN+ABC333’ < -- For Ship Direct orders, the tracking number assigned by a carrier
to the outermost package represented by the parent CPS Segment.
Data Element Summary
Data Component
Element Element Name Attributes
>> C506 REFERENCE M Identification of a reference. >> 1153 Reference qualifier M an..3 Code giving specific meaning to a reference segment or a reference number. CN Carrier's reference number Reference number assigned by carrier to a consignment. The identification used by the carrier to track a package,
i.e. air bill/small package tracking number. This Data Element will only be used when CPS Data Element 7075 indicates code 3 or 4.
CW Package number (7070) Reference number identifying a package or carton
within a consignment. The external package identification of the Lading Unit
represented by the parent CPS Segment. 1154 Reference number C an..35 Identification number the nature and function of which can be qualified by an
entry in data element 1153 Reference qualifier. X 1156 Line number C an..6 Number of the line in the document/message referenced in 1154 Reference
number. X 4000 Reference version number C an..35 To uniquely identify a reference by its revision number.
GM SPO Mexico Guideline
DESADV (D.97A) 47 Revised May 24, 2011
GROUP: LIN SEGMENT GROUP 15: LINE ITEM
Position: 0550
Group: Segment Group 10 (Consignment Packing Sequence) Conditional (Required)
Level: 2
Usage: Conditional (Required)
Max Use: 9999
Purpose:
Segment Summary
Pos. Seg. Req. Max. Group:
No. ID Name Des. Use Repeat
Must Use 0560 LIN Line Item M 1
Must Use 0600 QTY Quantity C 10
0710 Segment Group 16: Reference C 99
GM SPO Mexico Guideline
DESADV (D.97A) 48 Revised May 24, 2011
SEGMENT: LIN LINE ITEM
Position: 0560 (Trigger Segment)
Group: Segment Group 15 (Line Item) Conditional (Required)
Level: 2
Usage: Mandatory
Max Use: 1
Purpose: To identify a line item and configuration.
Dependency Notes:
Semantic Notes:
Comments:
Notes: LIN+++10243389:IN'
Data Element Summary
Data Component
Element Element Name Attributes
X 1082 LINE ITEM NUMBER C an..6 Serial number designating each separate item within a series of articles. X 1229 ACTION REQUEST/NOTIFICATION, CODED C an..3 Code specifying the action to be taken or already taken. Refer to D.97A Data Element Dictionary for acceptable code values. >> C212 ITEM NUMBER IDENTIFICATION C Goods identification for a specified source. >> 7140 Item number C an..35 A number allocated to a group or item. GM SPO Mexico part number. >> 7143 Item number type, coded C an..3 Identification of the type of item number. IN Buyer's item number X 1131 Code list qualifier C an..3 Identification of a code list. Refer to D.97A Data Element Dictionary for acceptable code values. X 3055 Code list responsible agency, coded C an..3 Code identifying the agency responsible for a code list. Refer to D.97A Data Element Dictionary for acceptable code values. X C829 SUB-LINE INFORMATION C To provide an indication that a segment or segment group is used to contain
sub-line or sub-line item information and to optionally enable the sub-line to be identified.
X 5495 Sub-line indicator, coded C an..3 Indication that the segment and/or segment group is used for sub-line item
information. Refer to D.97A Data Element Dictionary for acceptable code values. X 1082 Line item number C an..6 Serial number designating each separate item within a series of articles. X 1222 CONFIGURATION LEVEL C n..2 Number indicating the level of an object which is in a hierarchy. X 7083 CONFIGURATION, CODED C an..3
GM SPO Mexico Guideline
DESADV (D.97A) 49 Revised May 24, 2011
Code indicating the status of the sub-line item in the configuration. Refer to D.97A Data Element Dictionary for acceptable code values.
GM SPO Mexico Guideline
DESADV (D.97A) 50 Revised May 24, 2011
SEGMENT: QTY QUANTITY
Position: 0600
Group: Segment Group 15 (Line Item) Conditional (Required)
Level: 3
Usage: Mandatory
Max Use: 10
Purpose: To specify a pertinent quantity.
Dependency Notes:
Semantic Notes:
Comments:
Notes: One iteration of the QTY Segment is required to indicate the shipped quantity.
--CUM quantities are not required and are not processed.
--All items should have UOM of “EA”.
QTY+12:200:EA'
Data Element Summary
Data Component
Element Element Name Attributes
>> C186 QUANTITY DETAILS M Quantity information in a transaction, qualified when relevant. >> 6063 Quantity qualifier M an..3 Code giving specific meaning to a quantity. 3 Cumulative quantity 12 Despatch quantity Quantity despatched by the seller. >> 6060 Quantity M n..15 Numeric value of a quantity. 6411 Measure unit qualifier C an..3 Indication of the unit of measurement in which weight (mass), capacity, length,
area, volume or other quantity is expressed. All SPO Mexico shipments should have UOM of “EA”.
GM SPO Mexico Guideline
DESADV (D.97A) 51 Revised May 24, 2011
GROUP: RFF SEGMENT GROUP 16: REFERENCE
Position: 0710
Group: Segment Group 15 (Line Item) Conditional (Required)
Level: 3
Usage: Conditional (Required)
Max Use: 99
Purpose:
Segment Summary
Pos. Seg. Req. Max. Group:
No. ID Name Des. Use Repeat
Must Use 0720 RFF Reference M 1
GM SPO Mexico Guideline
DESADV (D.97A) 52 Revised May 24, 2011
SEGMENT: RFF REFERENCE
Position: 0720 (Trigger Segment)
Group: Segment Group 16 (Reference) Conditional (Required)
Level: 3
Usage: Mandatory
Max Use: 1
Purpose: To specify a reference.
Dependency Notes:
Semantic Notes:
Comments:
Notes: One iteration of Segment Group 16 is required to convey purchase order information.
RFF+ON:43065447'
Data Element Summary
Data Component
Element Element Name Attributes
>> C506 REFERENCE M Identification of a reference. >> 1153 Reference qualifier M an..3 Code giving specific meaning to a reference segment or a reference number. ON Order number (purchase) [1022] Reference number assigned by the buyer to an
order. THIS PURCHASE ORDER DATA IS REQUIRED FOR EVERY
LINE ITEM. 1154 Reference number C an..35 Identification number the nature and function of which can be qualified by an
entry in data element 1153 Reference qualifier. GM SPO Mexico Purchase Order number transmitted in RFF Segment, Segment
Group 1, in the DELJIT. X 1156 Line number
C an..6
Number of the line in the document/message referenced in 1154 Reference number.
X 4000 Reference version number C an..35
To uniquely identify a reference by its revision number.
GM SPO Mexico Guideline
DESADV (D.97A) 53 Revised May 24, 2011
DESADV SAMPLE MESSAGES
STOCK ORDER EXAMPLE (ORDER TYPES “NB”, “ZAS”, “ZSVP”)
UNB+UNOA:2+MBXNOSUPPLIER+GMSPOMEX+110315:0735+2000001++GMDESADV'
UNH+1+DESADV:D:97A:UN'
BGM+351+123456789+9' <==Contains Shipper "123456789"
DTM+137:201103150700:203' <==document creation date/time
DTM+11:201103150630:203' <==shipment date/time
DTM+132:20110404:102' <==Expected delivery date
MEA+AAX+G+LBR:500' <==Gross weight
MEA+AAX+SQ+C62:2' <==Number of boxes
RFF+CN:DW12345' <==Carrier’s Reference Number for Shipment
NAD+MI+23763::92++SPOM' <==SPOM Cisco code
NAD+ST+7080::92' <==SPOM Plant ("ship-to")
LOC+11+:::NON-PACKAGED DOCK' <==SPOM "Non-packaged" Dock
NAD+SU+876543210::16' <==Supplier Duns
TDT+12++M++:::TTT EXEXPRESS' <==Carrier name
EQD+TE+SLI987' <==Trailer #
CPS+1++3'
PAC+20' <==Number of boxes within outermost box for item
PCI+16'
RFF+CW:BOX1' <==ID of outermost box for line item
LIN+++10243389:IN' <==PN
QTY+12:200:EA' <==Qty shipped
RFF+ON:43065447' <==PO Number
CPS+2++3'
PAC+1'
PCI+16'
RFF+CW:BOX2'
LIN+++19894234:IN'
QTY+12:1:EA'
RFF+ON:43065448'
UNT+29+1'
UNZ+1+2000001'
GM SPO Mexico Guideline
DESADV (D.97A) 54 Revised May 24, 2011
SHIP DIRECT EXAMPLE (ORDER TYPES “ZSD” AND “ZVIP”)
UNB+UNOA:2+MBXNOSUPPLIER+GMSPOMEX+110315:0735+2000001++GMDESADV'
UNH+1+DESADV:D:97A:UN'
BGM+351+123456789+9' <==Contains Shipper "123456789"
DTM+137:201103150700:203' <==document creation date/time
DTM+11:201103150630:203' <==shipment date/time
DTM+132:20110404:102' <==Expected delivery date
MEA+AAX+G+LBR:500' <==Gross weight
MEA+AAX+SQ+C62:2' <==Number of boxes
RFF+CN:DW12345' <==Carrier’s Reference Number for Shipment
NAD+MI+23763::92++SPOM' <==SPOM Cisco code
NAD+UD+509033::86++Bachman Chevrolet Inc:Attn Parts Manager+9650 Bluegrass
Pky+Louisville+KY+402991900+US' <==Complete Dealer name and Address
LOC+11+:::NON-PACKAGED DOCK' <==SPOM "Non-packaged" Dock
NAD+SU+876543210::16' <==Supplier Duns
TDT+12++M++:::UPS' <==Carrier name
EQD+TE+SLI987' <==Trailer #
CPS+1++4'
PAC+0' <==0 within outermost box for item
PCI+16'
RFF+CN:TRACKING ID 1' <==Carrier’s Tracking ID for Package
LIN+++10243389:IN' <==PN
QTY+12:1:EA' <==Qty shipped
RFF+ON:43065447' <==PO Number
UNT+23+1'
UNZ+1+2000001'
Recommended