View
2
Download
0
Category
Preview:
Citation preview
Tools Required
Part Number: G110081 Page Number: 1 of 4 Revision: D
1 Remove Data Port Cover and Blank Adapter 2
3 +Cutout Opening for Ashley Trio Bezel Assembly 4 +Install Ashley Trio Bezel Assembly into Cutout
A
1 2 3 4 5
B
C
D
E
F
A
B
C
D
1 2 3 4 5
E
F
2.19”
8.50”
SCRAP
Horizontal or Vertical
Surface
* NOTE *Max Radius on Cutout Corners is 1/4”
Thickness Range of Mounting Surface
(3/4” to 1-1/2”)
* NOTE *Tabs Point Up when Unit isInstalled Vertically - See Vertical Orientation
HorizontalSurface
Orientation
This device complies with part 15A of theFCC Rules. Operation is subject to thefollowing two conditions: (1) This devicemay not cause harmful interference, and(2) this device must accept any interferencereceived, including interference that maycause undesired operation.
Vertical SurfaceOrientations
(A)
(B)
ASHLEY TRIO BEZELHorizontal or Vertical Surface Mounting
Installation Instruction
- Corded -
Install Data Port Option (VGA, RJ45, HDMI, BLANK)
See Sheet #2 for Detailed Instructions*NOTE*
E.C.N. No: GD17-002789
2505 Dekko DriveGarrett, IN 46738Customer Service: 800.357.5622
#15 TorxScrew Driver or Wrench
All Tech Adapters Need to be Mounted in the “UP” Position. (Refer to the back of Parts)
*NOTE*
POWER AND DATA
UP
Data PortCover
BlankAdapter
UP
UP
UP
UP
UP
VGA Option
RJ45Option
HDMI Option
BLANKOption
A
B8
76
3
5e
HDMI
A
1 2 3 4 5
B
C
D
E
F
A
B
C
D
1 2 3 4 5
E
F
Tools Required
Part Number: G110081 Page Number: 2 of 4 Revision: D
This device complies with part 15A of theFCC Rules. Operation is subject to thefollowing two conditions: (1) This devicemay not cause harmful interference, and(2) this device must accept any interferencereceived, including interference that maycause undesired operation.
E.C.N. No: GD17-002789
ASHLEY TRIO BEZELHorizontal or Vertical Surface Mounting
Installation Instruction
- Corded -2505 Dekko DriveGarrett, IN 46738Customer Service: 800.357.5622
#15 TorxScrew Driver or Wrench
All Tech Adapters Need to be Mounted in the “UP” Position. (Refer to the back of Parts)
*NOTE*
POWER AND DATA
2.1 Install Data Tech Adapter Option
Tech AdapterKeystone “Universal”
(Shown)
Data PortCover
Screw#15 Torx Head
HDMITripp-LiteAllen-TelAMP TE-KroneBelden KeyConnect
Leviton Quick Port Extreme
Optical Cable Corp 5eOptical Cable Corp 6OrtronicsPanduit NetKey
Leviton Quick PortHubbell PremiseType F Coax
KEYSTONE
Belden EZ MDVO Panduit Mini-COM
Commscope Ortronics TrackJack Siemon Cable Retainer
(Universal)
(Specific) (Specific)
(Specific) (Specific)(Specific)(Specific)
HDMI(Shown)
22.2 Install VGA Connector to VGA Tech Adapters
VGAConnector VGA
Tech Adapter“Back”
VGATech Adapter
“Front”
B Install VGA Adapter Assembly into UnitVGA
Tech AdapterAssembly Screw
#15 TorxHead
2.3 Install Blank Tech Adapter Option
BlankTech Adapter
Blank
Screw#15 Torx Head
VGA Front
VGA Back
Screws
(Specific)
(Specific)
ETC. (ET. AL.)
HDMI
UP
UP UP UP UP
UPUP
UP
AUP
UP
UPUP
UP
UP
Data PortCover
Data PortCover
A
1 2 3 4 5
B
C
D
E
F
A
B
C
D
1 2 3 4 5
E
F
Tools Required
Part Number: G110081 Page Number: 3 of 4
5 Install Retainer Bracket
6 Route Power Cord Option to Nearest PowerDistribution Source
* Align Tabs on Bezel with Slotson Retainer Bracket and Slide Over
and into Engaged Position *
Mounting Surface
Back Side
* NOTE *Route Power Cord Through Hole in Retainer Bracket
* Tighten (4) Screws to SecureUnit to Worksurface *
NEMAPlug
Revision: D
This device complies with part 15A of theFCC Rules. Operation is subject to thefollowing two conditions: (1) This devicemay not cause harmful interference, and(2) this device must accept any interferencereceived, including interference that maycause undesired operation.
E.C.N. No: GD17-002789
ASHLEY TRIO BEZELHorizontal or Vertical Surface Mounting
Installation Instruction
- Corded -2505 Dekko DriveGarrett, IN 46738Customer Service: 800.357.5622
#15 TorxScrew Driver or Wrench
POWER AND DATA
A
1 2 3 4 5
B
C
D
E
F
A
B
C
D
1 2 3 4 5
E
F
Page Number: 4 of 4
8.50
”
2.19
”
+A
SHLE
Y TR
IO B
EZEL
CU
TOU
T
MA
XIM
UM
CO
RN
ER R
AD
IUS
1/4”
Part Number: G110081 Revision: D
This device complies with part 15A of theFCC Rules. Operation is subject to thefollowing two conditions: (1) This devicemay not cause harmful interference, and(2) this device must accept any interferencereceived, including interference that maycause undesired operation.
E.C.N. No: GD17-002789
ASHLEY TRIO BEZELHorizontal or Vertical Surface Mounting
Installation Instruction
- Corded -
POWER AND DATA
2505 Dekko DriveGarrett, IN 46738Customer Service: 800.357.5622
Recommended