View
215
Download
0
Category
Preview:
Citation preview
www.midwestwheel.com
Order NLINE™
www.midwestwheel.com
Order NLINE™
CATA
LOG
NUM
BER
22
Fluid Heating Solutions From Arctic Fox Serving These Markets:Public Utilities ∙ Public Works ∙ Construction
Airport Ground Support ∙ Forestry / Logging ∙ Oil & Gas ∙ Mining
► Avoid the down time, towing and repair costs of fuel line & filter freeze up
► Reduce the use of blended fuel and additives
► Quick return on investment
► Long term solution
Out FOX the COLD with SMARTER SOLUTIONS!
FUEL & FLUID HEATING SOLUTIONS
Increase Productivity & Cold Weather Equipment Operation!
For more than a quarter century, Arctic Fox has produced stainless steel heat exchangers for diesel fuel and fluids. Both in-line and in-tank heaters utilize engine coolant running through efficient heat exchangers to prevent fuel gelling.
In addition to stainless steel heat exchangers, Arctic Fox offers electric heating pads that easily attach to the exterior of steel or aluminum tanks. While most applications are covered by our standard product line, custom designs are available.
There is a Smarter Solution to the common problems of cold weather operation --- fuel and fluid warming systems from Arctic Fox.
Arctic Fox gives you more fuel heating options.
Electric options provide effective starting aids to pre-warm fuel.
Coolant options provide heated fuel while the engine is running and the fuel is flowing. These options allow for the reduction of blended fuel and costly additives in cold weather.
In-tank fuel heater options can integrate with a diesel fired coolant heater to preheat the fuel while the engine is off. This provides the flexibility to pre-warm fluids before you arrive at the job site.
Hydraulics power your machine accessories. Waiting for cold hydraulic fluid to warm up reduces your productivity. Heating your hydraulic fluid improves cycle time, protects against hydraulic pump damage and the possibility of blown or leaking hoses.
Go with the world leader in Fluid & Fuel Heating Systems.
Go with Arctic Fox!
Work Without Waiting for Equipment to Warm UpInvest in a Long Term, Smarter Solution, from Arctic Fox
» INCREASE productivity and equipment performance.
» REDUCE fuel additive use.
» PROTECT against hydraulic pump and hose damage.
» RUN #2 diesel year-round.
IN-LINE FUEL HEATERS • Provides Protection Against Fuel Gelling • Maintenance Free • Optional Coolant Shutoff Thermostat • Electric Preheat Options Available • Integrates With 120 Volt AC Electric Block Heaters
ELECTRIC PAD HEATERS • Easy Peel and Stick Application • Models Available 120/220 VAC
& 12/24 VDC • Aluminum Backing Gives
Even Heat Distribution • Mounts To Any Smooth
Paint-Free Metal Surface
IN-TANK FUEL HEATERS • Warm Fuel Efficiently • Provides Protection Against Fuel Gelling • Rotates for Easy Mounting • Optional Coolant Shutoff Thermostat Available
HOTLINE ELECTRIC IN-LINE FUEL HEATER • Assists With Cold Starts
By Warming Gelled Fuel In Fuel Lines
BATTERY WARMERS • Reduce Battery Charge Time • Utilizes Heat Energy from Coolant • Lightweight Durable Construction • Extends Battery and Charging System Life
HYDRAULIC FLUID WARMERS • Reduce Pump Cavitation • Faster Hydraulic Operation • Maximum Heat Transfer
For more than a quarter century, Arctic Fox has produced stainless steel heat exchangers for diesel fuel and fluids. Both in-line and in-tank heaters utilize engine coolant running through efficient heat exchangers to prevent fuel gelling. Hydraulic fluid warmers use the same principle to promote smooth operation.
In addition to stainless steel heat exchangers, Arctic Fox offers electric heating pads and other system options.
While most applications are covered by our standard product line, custom designs are available.
There is a Smarter Solution to the common problems of cold weather operation -- fuel and fluid warming systems from Arctic Fox.
Electric options provide effective starting aids to pre-warm fuel. Coolant options provide heated fuel while the engine is running and the fuel is flowing.
These options allow for the reduction of blended fuel and costly additives in cold weather.
In-tank fuel heater options integrate into an onboard APU or diesel fired coolant heater to preheat the fuel while the engine is off.... keeping the driver, engine, AND FUEL warm without idling.
Go with the Leader in Fluid and Fuel Heating Systems, Arctic Fox!
Gets you going.... keeps you flowing!
Protect yourself from Cold Weather problems that cost you Time & Money
Invest in a Long Term, Smarter Solution, from Arctic FoxOffering Quick Payback and Low Maintenance
» REDUCE Road Break Downs
BATTERY WARMERS • Reduce Battery Charge Time • Utilizes Heat Energy from Coolant • Lightweight Durable Construction • Extends Battery and Charging System Life
HOTLINE ELECTRIC IN-LINE FUEL HEATER • Assists With Cold Starts
By Warming Gelled Fuel In Fuel Lines
Trucking ROI CalculatorArctic Fox In-Tank Fuel Heaters & #2 Diesel V/S #1 Diesel
Annual Miles Driven 125,000Average Miles/Month 10,417Number of Months using No. 1 4Number of Miles using No. 1 41,667Average MPG 7Gallons of No. 1 Consumed 5,952No. 1 Cost/Gal Over No. 2 $0.20Total Annual Cost of No. 1 $1,190Cost per Month of No. 1 Usage $397Typical OEM Installed Option Price of dual Arctic Fox In-Tank Heaters w/ By-pass Thermostat
$472.00
Payback - No. of Months 1.19This ROI Calculator shows that dual factory installed Arctic Fox
In-Tank Fuel Warmers can be paid for in less than 2 months!Plug in your own figures and see for yourself!
IN-LINE FUEL HEATERS • Provides Protection
Against Fuel Gelling • Maintenance Free • Optional Coolant Shutoff Thermostat • Electric Preheat Options Available • Integrates With 120 Volt AC Electric Block Heaters
ELECTRIC PAD HEATERS • Easy Peel and Stick Application • Models Available 120/220 VAC
& 12/24 VDC • Aluminum Backing Gives
Even Heat Distribution • Mounts To Any Smooth
Paint-Free Metal Surface
IN-TANK FUEL HEATERS • Warm Fuel Efficiently • Provides Protection Against Fuel Gelling • Rotates for Easy Mounting • Optional Coolant Shutoff Thermostat Available
» REDUCE fuel additive use. » RUN #2 diesel year-round.
INTEGRATE WITH EXISTING ON-BOARD APU OR DIESEL FIRED COOLANT HEATER • Plumbed In Series With On-Board
APU Or Diesel Fired Coolant Heater To Preheat Fluids
• Keep Fluids Warm While Engine Is Off • Integrated APU/Preheater Fuel Pickup
Options Available
MIDWESTWHEEL.COM
IOW
A
DES MOINES1436 E. Ovid Ave.
office 515.265.1491fax 515.265.4120
parts fax 800.314.4329parts 800.888.0248
SIOUX CITY1819 E. 4th St.
main 712.252.7969fax 712.252.6149
parts 800.943.3534
DAVENPORT8502 Northwest Blvd.
main 563.322.2671fax 563.322.5940
parts 800.553.1886
CLEAR LAKE840 Hwy. 18 W.
main 641.357.7101fax 641.357.8190
parts fax 800.548.9674parts 800.397.5630
CEDAR RAPIDS200 50th Ave. S.W.main 319.365.4453fax 319.365.6327
parts fax 877.706.6085parts 800.332.5435
MIS
SO
UR
I
KANSAS CITY5801 E. Front St.
main 816.471.1552fax 816.471.0813
parts 800.821.7402TRUCK PARTSSUPER STORETM
August 11, 2016 (22Arctic Fox Fluid Heating Solutions)
Coolant DamVacuum & Pressure Testing
In Tank Heating for Hydraulicand Other Fluids
Coolant Shutoff ThermostatsProvides Thermal Protection
In-Line & In-Tank Fuel WarmersProtection from Fuel Gelling
Battery WarmersCharging System Optimization
Hot Line In-Line Electric Fuel Heat Assists with Cold Engine Startup
Electric Pad HeatFast Heat for Metal Tanks
Insulated Sleeved Coolant HoseHelps Maintain Heat Energy
Coolant ManifoldsEfficient Coolant Distribution
Recommended