View
4
Download
0
Category
Preview:
Citation preview
FRONT BUMPER REMOVAL/INSTALLATION
Disconnect the negative battery cable.1.
Remove the radiator grille. (See RADIATOR GRILLE REMOVAL/INSTALLATION .)2.
Remove the front combination light. (See FRONT COMBINATION LIGHT REMOVAL/INSTALLATION .)3.
Disconnect the front fog light connector.4.
Remove in the order indicated in Fig 1 or Fig 2.
Standard
5.
2006 Mazda Eng ES
Printer Friendly View http://www1.prodemand.com/Print/Index?content=article&module=false&tab=false&terms=fal...
1 of 10 9/15/2014 11:48 AM
Edited with the trial version of Foxit Advanced PDF Editor
To remove this notice, visit:www.foxitsoftware.com/shopping
Fig 1: Removing Front Bumper (Standard)
Printer Friendly View http://www1.prodemand.com/Print/Index?content=article&module=false&tab=false&terms=fal...
2 of 10 9/15/2014 11:48 AM
Edited with the trial version of Foxit Advanced PDF Editor
To remove this notice, visit:www.foxitsoftware.com/shopping
Printer Friendly View http://www1.prodemand.com/Print/Index?content=article&module=false&tab=false&terms=fal...
3 of 10 9/15/2014 11:48 AM
Edited with the trial version of Foxit Advanced PDF Editor
To remove this notice, visit:www.foxitsoftware.com/shopping
Sports
Install in the reverse order of removal.6.
Courtesy of MAZDA MOTORS CORP.
Printer Friendly View http://www1.prodemand.com/Print/Index?content=article&module=false&tab=false&terms=fal...
4 of 10 9/15/2014 11:48 AM
Edited with the trial version of Foxit Advanced PDF Editor
To remove this notice, visit:www.foxitsoftware.com/shopping
Fig 2: Removing Front Bumper (Sports)
Printer Friendly View http://www1.prodemand.com/Print/Index?content=article&module=false&tab=false&terms=fal...
5 of 10 9/15/2014 11:48 AM
Edited with the trial version of Foxit Advanced PDF Editor
To remove this notice, visit:www.foxitsoftware.com/shopping
Printer Friendly View http://www1.prodemand.com/Print/Index?content=article&module=false&tab=false&terms=fal...
6 of 10 9/15/2014 11:48 AM
Edited with the trial version of Foxit Advanced PDF Editor
To remove this notice, visit:www.foxitsoftware.com/shopping
Front Bumper Removal Note
Pull the front bumper ends (wheel arch) outward to disengage from the bumper slider.
CAUTION:
If only one side of the front bumper is
disengaged from the bumper slider and
the bumper falls, it could be damaged.
When disengaging the front bumper from
the slider, secure the bumper so that it
does not fall.
1.
1.
Remove the front bumper from the body.2.
Courtesy of MAZDA MOTORS CORP.
Printer Friendly View http://www1.prodemand.com/Print/Index?content=article&module=false&tab=false&terms=fal...
7 of 10 9/15/2014 11:48 AM
Edited with the trial version of Foxit Advanced PDF Editor
To remove this notice, visit:www.foxitsoftware.com/shopping
Fig 3: Pulling Front Bumper Ends
Printer Friendly View http://www1.prodemand.com/Print/Index?content=article&module=false&tab=false&terms=fal...
8 of 10 9/15/2014 11:48 AM
Edited with the trial version of Foxit Advanced PDF Editor
To remove this notice, visit:www.foxitsoftware.com/shopping
Printer Friendly View http://www1.prodemand.com/Print/Index?content=article&module=false&tab=false&terms=fal...
9 of 10 9/15/2014 11:48 AM
Edited with the trial version of Foxit Advanced PDF Editor
To remove this notice, visit:www.foxitsoftware.com/shopping
Front Bumper Installation Note
Spread the front bumper ends (wheel arches) apart.1.
Attach the front bumper to the body.2.
Press the front bumper connections into the body to engage with the bumper slider.3.
Courtesy of MAZDA MOTORS CORP.
Printer Friendly View http://www1.prodemand.com/Print/Index?content=article&module=false&tab=false&terms=fal...
10 of 10 9/15/2014 11:48 AM
Edited with the trial version of Foxit Advanced PDF Editor
To remove this notice, visit:www.foxitsoftware.com/shopping
Recommended