View
235
Download
0
Category
Preview:
Citation preview
• frequency reuse
https://store.theartofservice.com/the-frequency-reuse-toolkit.html
Digital Enhanced Cordless Telecommunications Radio links
1 If frequency-hopping is avoided, each base station can provide up to 120
channels in the DECT spectrum before frequency reuse
https://store.theartofservice.com/the-frequency-reuse-toolkit.html
Cellular network Frequency reuse
1 The key characteristic of a cellular network is the ability to re-use frequencies to increase both coverage and capacity. As described above, adjacent cells must use different frequencies, however there is no
problem with two cells sufficiently far apart operating on the same frequency. The elements that determine frequency
reuse are the reuse distance and the reuse factor.
https://store.theartofservice.com/the-frequency-reuse-toolkit.html
Cellular network Frequency reuse
1 The frequency reuse factor is the rate at which the same frequency
can be used in the network. It is 1/K (or K according to some books)
where K is the number of cells which cannot use the same frequencies for transmission. Common values for the frequency reuse factor are 1/3, 1/4,
1/7, 1/9 and 1/12 (or 3, 4, 7, 9 and 12 depending on notation).
https://store.theartofservice.com/the-frequency-reuse-toolkit.html
Cellular network Frequency reuse
1 Code division multiple access-based systems use a wider frequency band
to achieve the same rate of transmission as FDMA, but this is
compensated for by the ability to use a frequency reuse factor of 1, for
example using a reuse pattern of 1/1
https://store.theartofservice.com/the-frequency-reuse-toolkit.html
Cellular network Frequency reuse
1 Recently also orthogonal frequency-division multiple access based systems such as LTE are being
deployed with a frequency reuse of 1
https://store.theartofservice.com/the-frequency-reuse-toolkit.html
Code division multiple access Spread-spectrum characteristics of CDMA
1 Frequency reuse is the ability to reuse the same radio channel
frequency at other cell sites within a cellular system
https://store.theartofservice.com/the-frequency-reuse-toolkit.html
Microwave
1 Microwaves are especially suitable for this use since they are more easily
focused into narrow beams than radio waves, allowing frequency reuse; their comparatively higher frequencies allow
broad bandwidth and high data transmission rates, and antenna sizes are smaller than at lower frequencies
because antenna size is inversely proportional to transmitted frequency
https://store.theartofservice.com/the-frequency-reuse-toolkit.html
History of mobile phones - Cellular concepts
1 The concepts of frequency reuse and handoff, as well as a number of other
concepts that formed the basis of modern cell phone technology, were
described in the late 1960s, in papers by Frenkiel and Porter
https://store.theartofservice.com/the-frequency-reuse-toolkit.html
Digital radio - Two-way digital radio standards
1 The key breakthrough or key feature in digital radio transmission systems is that they allow lower transmission power, they can provide robustness
to noise and cross-talk and other forms of interference, and thus allow
the same radio frequency to be frequency reuse|reused at shorter
distance
https://store.theartofservice.com/the-frequency-reuse-toolkit.html
CDMA - Spread-spectrum characteristics of CDMA
1 Frequency reuse is the ability to reuse the same radio channel
frequency at other cell sites within a cellular system
https://store.theartofservice.com/the-frequency-reuse-toolkit.html
Greenfield project - Cellular networks
1 They were developed with no regard for future capacity considerations or frequency
reuse
https://store.theartofservice.com/the-frequency-reuse-toolkit.html
Extremely high frequency
1 The small wavelength allows modest size antennas to have a small beam width, further increasing frequency
reuse potential.
https://store.theartofservice.com/the-frequency-reuse-toolkit.html
Extremely high frequency - Propagation
1 Millimeter waves travel solely by line-of-sight propagation|line-of-sight, and are
blocked by building walls and attenuated by foliage. The high free space loss and
atmospheric absorption limits propagation to a few kilometers. Thus they are useful
for densely packed communications networks such as personal area networks that improve spectrum utilization through
frequency reuse.
https://store.theartofservice.com/the-frequency-reuse-toolkit.html
Spectral efficiency comparison table - Link spectral efficiency
1 This can allow for much denser geographical frequency reuse that
compensates for the lower link spectral efficiency, resulting in
approximately the same capacity (the same number of simultaneous
phone calls) over the same bandwidth, using the same number
of base station transmitters
https://store.theartofservice.com/the-frequency-reuse-toolkit.html
Spectral efficiency comparison table - System spectral efficiency or area spectral efficiency
1 :'Example 8:' In a cellular system based on frequency-division multiple access (FDMA) with a fixed channel
allocation (FCA) cellplan using a frequency reuse factor of 4, each
base station has access to 1/4 of the total available frequency spectrum
https://store.theartofservice.com/the-frequency-reuse-toolkit.html
Spectral efficiency comparison table - System spectral efficiency or area spectral efficiency
1 Spread spectrum makes it possible to have as low a frequency reuse factor as 1, if each base station is divided
into 3 cells by means of 3 directional sector antennas
https://store.theartofservice.com/the-frequency-reuse-toolkit.html
Cell site - Channel reuse
1 To overcome this limitation, it is necessary to repeat and frequency reuse|reuse the same channels at
different locations
https://store.theartofservice.com/the-frequency-reuse-toolkit.html
DECT - Radio links
1 If frequency-hopping is avoided, each base station can provide up to 120
channels in the DECT spectrum before frequency reuse
https://store.theartofservice.com/the-frequency-reuse-toolkit.html
Cellular networks - Frequency reuse
1 The key characteristic of a cellular network is the ability to re-use frequencies to increase both coverage and capacity. As described above, adjacent cells must
use different frequencies, however there is no problem with two cells sufficiently far apart operating on the same frequency. The elements that determine frequency
reuse are the reuse distance and the reuse factor.
https://store.theartofservice.com/the-frequency-reuse-toolkit.html
Cellular networks - Frequency reuse
1 Recently also orthogonal frequency-division multiple access based
systems such as 3GPP Long Term Evolution|LTE are being deployed with a frequency reuse of 1. Since such systems do not spread the
signal across the frequency band,
https://store.theartofservice.com/the-frequency-reuse-toolkit.html
Licensed spectrum - Governments and spectrum management
1 Unlike these, however, frequency reuse|RF is reusable
https://store.theartofservice.com/the-frequency-reuse-toolkit.html
Frequency allocation
1 * Only the licensed user of that band may transmit: the licensing body may give the same frequency to
several users as a form of frequency reuse if they cannot interfere
because their coverage map areas never overlap.
https://store.theartofservice.com/the-frequency-reuse-toolkit.html
Digital Audio Broadcasting - Use of frequency spectrum and transmitter sites
1 The frequency reuse factor for local programmes and multi-frequency
broadcasting networks (Multi-frequency network|MFN) is typically 4 or 5, resulting in 1 / 4 / (0.26MHz) = 0.96 programmes/transmitter/MHz
https://store.theartofservice.com/the-frequency-reuse-toolkit.html
Super high frequency - Propagation
1 Such high gain antennas allow
frequency reuse by nearby transmitters
https://store.theartofservice.com/the-frequency-reuse-toolkit.html
Super high frequency - Utilization
1 They are the lowest frequency band where radio waves can be directed in narrow beams by conveniently sized
antennas so they do not interfere with nearby transmitters on the
same frequency, allowing frequency reuse
https://store.theartofservice.com/the-frequency-reuse-toolkit.html
Saorsat - Overview
1 The spot beam with frequency reuse means reception in most of Britain
and continental Europe is not possible
https://store.theartofservice.com/the-frequency-reuse-toolkit.html
Microwaves - Microwave uses
1 Microwaves are especially suitable for this use since they are more easily focused into narrower beams than radio waves, allowing
frequency reuse; their comparatively higher frequencies allow broad Bandwidth
(signal processing)|bandwidth and high data transmission rates, and antenna sizes
are smaller than at lower frequencies because antenna size is inversely
proportional to transmitted frequency
https://store.theartofservice.com/the-frequency-reuse-toolkit.html
Spectrum allocation
1 * Only the licensed user of that band may transmit: the licensing body may give the same frequency or
band to several users as a form of frequency reuse if they cannot
interfere because their coverage map areas never overlap. Amateur
radio frequency allocations also devoted only for licensed users with listen before talk contention-based
protocol.https://store.theartofservice.com/the-frequency-reuse-toolkit.html
Radio resource management
1 RRM is especially important in systems limited by co-channel
interference rather than by noise, for example cellular systems and
broadcast networks homogeneously covering large areas, and wireless
networks consisting of many adjacent Wireless access point|
access points that may frequency reuse|reuse the same channel
frequencies.https://store.theartofservice.com/the-frequency-reuse-toolkit.html
Radio resource management
1 In cellular networks, this means that the fractional frequency reuse in the GSM standard has been replaced by a universal frequency reuse in LTE (telecommunication)|LTE standard.
https://store.theartofservice.com/the-frequency-reuse-toolkit.html
Radio resource management - Dynamic radio resource management
1 Dynamic RRM schemes adaptively adjust the radio network parameters to the traffic load, user positions, user mobility, quality
of service requirements, base station density, etc. Dynamic RRM schemes are
considered in the design of wireless systems, in view to minimize expensive
manual cell planning and achieve tighter frequency reuse patterns, resulting in improved system spectral efficiency.
https://store.theartofservice.com/the-frequency-reuse-toolkit.html
Radio resource management - Inter-cell radio resource management
1 Future networks like the LTE (telecommunication)|LTE standard
(defined by 3GPP) are designed for a frequency reuse of one
https://store.theartofservice.com/the-frequency-reuse-toolkit.html
Spectrum management - Governments and spectrum management
1 Unlike these, however, frequency reuse|RF is
reusable.[http://ssrn.com/abstract=793526 Radio spectrum as natural resource] The purpose of spectrum management is to mitigate radio spectrum pollution and maximize the benefit of usable radio
spectrum.[http://ssrn.com/abstract=556673 Application of the Public-Trust Doctrine and Principles of Natural Resource Management
to Electromagnetic Spectrum]https://store.theartofservice.com/the-frequency-reuse-toolkit.html
Polarisation division multiple access
1 Each corresponding ground station antenna needs to be polarized in the same way as its counterpart in the satellite. This
is generally accomplished by providing each participating ground station with an antenna that has dual polarization. The
frequency band allocated to each antenna beam can be identical because the uplink signals are orthogonal in polarization. This
technique allows frequency reuse.
https://store.theartofservice.com/the-frequency-reuse-toolkit.html
Spectrum efficiency - System spectral efficiency or area spectral efficiency
1 :'Example 8:' In a cellular system based on frequency-division multiple access (FDMA) with a fixed channel
allocation (FCA) cellplan using a frequency reuse factor of 1/4, each
base station has access to 1/4 of the total available frequency spectrum
https://store.theartofservice.com/the-frequency-reuse-toolkit.html
Tooway - Technology
1 Smaller beams allow more efficient use of satellite power on the forward link and improved G/T (Link budget|
Gain-over-Temperature) on the return link. Smaller beams draw smaller cells on ground (beam footprint)
which also permits more cells in a given service area, increasing
frequency reuse.
https://store.theartofservice.com/the-frequency-reuse-toolkit.html
Ultra Mobile Broadband - Features
1 **Dynamic fractional frequency
reuse
https://store.theartofservice.com/the-frequency-reuse-toolkit.html
Power control - Benefits
1 Even in FDMA systems such as GSM where each user in a cell uses a
different frequency, interference is still present between different cells
and reduces the amount of frequency reuse the network can support
https://store.theartofservice.com/the-frequency-reuse-toolkit.html
Co-channel interference
1 The co-channel interference arises in the cellular mobile networks owing to this phenomenon of Cellular network|
Frequency reuse
https://store.theartofservice.com/the-frequency-reuse-toolkit.html
For More Information, Visit:
• https://store.theartofservice.com/the-frequency-reuse-toolkit.html
The Art of Servicehttps://store.theartofservice.com
Recommended