View
215
Download
2
Category
Preview:
Citation preview
F R E E F LO W W I N E S
NO WASTE No oxidized wine. Nothing to throw away.
ECO FRIENDLY Steel kegs are 100% reusable.
FRESHNESS A guaranteed fresh glass of wine from the first pour to the last.
SPEED OF SERVICE No corks to pull, bottles to stock or recycle.
TRENDING Hottest new trend in food & beverage programs across the country.
WHY WINE ON TAP?
CO2
96% reduction in CO2 footprint with reusable stainless steel kegs
28 TREESOne steel keg saves the CO2 equivalent to that sequestered by 28 trees
Each steel keg will save 2,340 lbs of trash from the landfill over its lifetime
2 YEARSON THE ROAD
Each steel keg put into service eliminates the carbon emissions equivalent to taking a car o� the road for two years
2,340 lbs
Average cost savings per keg = $18
Most accounts see a Return on Investment within 6 months!
Calculate the ROI for your program at
GREENER, FRESHER, BETTER
ontapWINEtry
.com
WHY STAINLESS STEEL?
MEET OUR KEGS
WINE QUALITY Only stainless steel kegs are impermeable to oxygen and stay fresh up to 18 months untapped & 3 months once tapped.
STANDARD SIZE + PARTS Our sixth barrel kegs fit into all draft systems.
ENVIRONMENTAL BENEFITS Reusable steel kegs save millions of pounds of trash from landfills every year. Compared to disposable plastic kegs, steel kegs reduce the carbon footprint 30-50% & up to 96% better than wine in bottles.
HEIGHT 24” X 9.5” Sixth Barrel Kegs WEIGHT 58 lbs full 5.16 gallons 26 bottles 132 5 oz pours
FRESHNESS 18 months untapped 3 months tapped
STANDARD American Sankey D Fittings
26 bottles
132 5 oz. glasses
5.16 gallons
19.5 liters
58 lbs full
9.25” wide x 24” tall
FULL FULL FULL FULL FULL FULL
FULL FULL FULL
EMPTY EMPTY EMPTY
Distributor
Restaurant
Distributor Invoices Restaurant $30 deposit per Keg
Free Flow Credits Distributor $30 deposit
per returned, empty Keg
Distributor CreditsRestaurant $30 deposit
per returned, empty Keg
Free Flow Invoices Distributor $30 deposit per Keg
Free Flow Fill Kegs Distributor Sells Kegs
Restaurants empty kegs
Distributor consolidates empty kegs
Distributor
Free FlowPremium
Wine
EMPTY EMPTY EMPTY
Free Flow Wines is a kegging & logistics company. We facilitate connections between winery clients, distributors, sales reps & draft system installers to make wine on tap easy for you.
HOW DOES IT WORK?
COMMON WINE DRAFT SYSTEM INSTALLATIONS
Kegs are located in refrigerated units beneath taps. Perfect for restaurants and bars that have space at, or very near, the point of dispense. The short draw maximizes loss and ensures best serving temperature.
LONG DRAW WINE SYSTEM
Kegs are located away from taps (usually in a walk-in cooler) and temperature controlled lines carry the wine from kegs to taps. The long draw system ensures the wine arrives at the point of dispense at the correct temperature and is protected along the way. Long draw systems vary widely based on installation complexity, time and cost.
An existing direct draw system retrofit requires:
1. Wine-certified Hardware. NO BEER PARTS! Any metal that touches wine needs an upgrade to 304 grade stainless steel (this includes your tower, faucets and couplers)
2. Wine Grade Tubing to prevent oxygen leaks, flavor transfer and off tastes. Lines and hardware need to be cleaned quarterly, or when a keg is changed or replaced.
3. A blend of 75% Nitrogen and 25% CO2 (AKA Guinness Gas or BevGas) should be used. For direct draw, a pressure setting of 4-7 PSI is all that’s needed.
304-GRADE STAINLESS STEEL FAUCETS 304-GRADE STAINLESS
STEEL COUPLER
WINE-GRADE LINES
+ PLUS FITTINGS, MISC PARTS, ETC.
REGULATOR & GAS (75% NITROGEN / 25% CO2)
RETROFIT YOUR BEER LINES FOR PREMIUM WINE ON TAP!
304-GRADE STAINLESS STEEL COUPLER
304-GRADE STAINLESS STEEL FAUCETS
GLYCOL TRUNK LINE AND GLYCOL LINES
WINE-GRADE LINES
+ PLUS FITTINGS, MISC PARTS, ETC.
POWER PACK (COOLING SYSTEM)
REGULATOR & GAS (75% NITROGEN / 25% CO2)
DIRECT DRAW WINE SYSTEM
ALTERNATIVE DISPENSE OPTIONS
2 temperature controlled compartments hold(4) 1/6th barrel kegs (2 white & 2 red wines)
Approx. Dimensions: 24.25”W x 31”D x 42”H
Front & Back ventilating options
Designed for mobile use or behind a bar
Exterior Material Options are Available
Electricity Required
Specs Available Upon Request
2 temperature controlled compartments hold(4) 1/6th barrel kegs (2 white & 2 red wines)
Approx. Dimensions: 59.5”W x 28.25”D x 37.25”H
Custom Exterior Wraps Available
Electricity Required
Specs Available Upon Request
Dispenses red & white wine through a single unit
Approx. Dimensions: 18”W x 18”D x 15”H
Ideal for Events or Table Top Dispense
Easy to Transport - No Install Needed
No Electricity Options Available
2–4 Tap Kegerator
6-8 Tap Kegerator or Mobile Carts
1-4 Tap Bar-Top Dispenser
BEST PRACTICES
LINE CLEANING FREQUENCY Quarterly, or at change of product
GAS PRESSURE Pressure gauge reading should be between 4 - 6 PSI
GAS75% Nitrogen/ 25% CO2, AKA Beverage Gas or “Guinness Gas”
DISPENSING TEMPERATURES 40 - 45° for Whites55 - 60° for Reds
Gas Tank
15
300
100
2000
Pressure
STORAGE Store untapped kegs with other wines. Wine stays fresh – tapped 3 months, untapped 12 months
LINE CLEANING FREQUENCY Quarterly, or at change of product
GASUse beverage grade CO2 gas onlyNote specific PSI per wine on keg cap (may vary between 20 - 40 PSI)An additional CO2 regulator may be needed
STORAGE Store sparkling wine kegs in cooler for at least 24 hours prior to tapping. Sparkling wine in keg should be tapped within 12 monthsOnce tapped it stays fresh up to 3 months
50
1000
100%CO
DISPENSING TEMPERATURE33-40° F Wine will foam at temperatures above 40°
STILL WINE & SAKE
SPARKLING WINE
EQUIPMENTDirect Draw Setup or mobile kegerator at low temperatures only (A long draw system will NOT work for sparkling wine)
Use a Flow Control Faucet (sold by every major draft parts supplier) to manage flow speed and foaming
Use only wine-certified 304-grade Stainless Steel (No 303-grade steel or Beer Parts!) & 3/16 vinyl tubing with minimum length of 14ft
HIGH PRESSURE GAUGE
LOW PRESSURE GAUGE
CONNECTOR
SHUT OFF/BACKFLOW PREVENTER
ADJUSTING SCREW
SAFETY RELEASE VALVE
TROUBLESHOOTING
Make sure couplers are properly attached to kegs, handles pushed down & locked
Are you out of wine? Might be time to change your keg...
Confirm gas is turned on (see large valve at top of gas tank)Check that the red valve on gas is open (not perpendicular to gas line)
Check the reading on left gauge of the regulator (attached to the gas tank behind the red wine)
If it’s less than 300 psi, change the gas tank (see “Adjustments”)
ADJUSTMENTS
Here’s how to adjust your wine flow:
Locate the regulator (attached to the gas).
Using a flat head screw driver, twist the screw to the rightto increase flow; twist left to decrease flow.
If the left gauge of the regulator reads less than 300 psi, It’s time to change the gas. Here’s how:
Turn off the gas by closing screw valve at the top of the tank.
Unscrew the brass nut connecting the regulator to the tank
Pull old tank out & replace with a new one.
Screw in the regulator and then turn on the tank.
FLOW OF WINE
REPLACING GAS
FOLLOW THESE STEPS, THEN TEST FOR SUCCESS
A regulator adjusts and controls the flow of gas from any source. Each regulator typically has at
least one and often two pressure gauges that help in setting pressures and monitoring gas levels: one
high-pressure gauge showing the tank or supply pressure, and a second low-pressure gauge showing
what is being delivered to the keg.
REGULATOR
For more helpful info & resources, visit
855-KEG-WINEinfo@TryWineOnTap.com
ontapWINEtry
.com
Wine coming out too fast or too slow?
Check upper gauge (0-60 psi).
Recommended