View
228
Download
0
Category
Preview:
Citation preview
7/27/2019 fluid chapter 1
1/16
2
Basic Concepts
Mechanics: the science which seeks an explanation
for the motion of bodies based upon models grounded
in well defined axioms.Static: the force analysis on a fixed body.
Kinematics: a description of the motion of a body.
Dynamics: the study of a bodys motion and its
causing forces.
7/27/2019 fluid chapter 1
2/16
3
A matter phase that cannot withstand any tendency
for applied forces to deform it in such a way that
volume is left unchanged.
A substance that deforms continuously whensubject to a shear stress of any magnitude.
Simply:
Gases and liquids
are fluids.
What is a Fluid?
7/27/2019 fluid chapter 1
3/16
4
Fluid mechanics: the science that concern with the
behavior of fluids (liquids or gases) at rest or in
motion.
Classification of fluid mechanics:
The study of fluid mechanics goes back at least to the
days of ancient Greece; Archimedes' Principle.
o Hydrodynamics: flow of liquids.
o Gas dynamics: flow of gases.
o Aerodynamics: flow of air.
7/27/2019 fluid chapter 1
4/16
5
DIMENSIONS AND UNITSAny physical quantity can be characterized by
dimensions.
The magnitudes assigned to the dimensionsare called units.
SI system:A simple and logical system basedon a decimal relationship between the various
units.English system: It has no apparent systematicnumerical base. Major confusion in this systemis the Force;
.
Dimensional homogeneityAll equations must be dimensionally homogeneous; each term in the
equation must have the same dimension, e.g. V=Vo+at.
7/27/2019 fluid chapter 1
5/16
6
PRIMARY AND SECONDARY DIMENSIONS
Some basic dimensions are selected asprimary dimensions, such as:mass m, length L, time t, and temperature T.
Others, expressed in terms of the primarydimensions and are called secondary
dimensions, such as velocity V, force F,energy E,etc.
Scalar and Vector Quantities
Scalar quantity has only magnitude.(e.g. mass, density, speed.)
Vector quantity has both magnitude and direction.(e.g. weight, Force, velocity.)
Work = Force Displacement
Force = Mass Acceleration
7/27/2019 fluid chapter 1
6/16
7
Fluid as a continuum
Matter is made up of atoms that arewidely spaced in the gas phase.
Yet it is very convenient todisregard the atomic nature of a
substance and view it as acontinuous, homogeneous matterwith no holes, that is, a continuum.
In this course we will limit ourconsideration to substances thatcan be modeled as a continuum.
7/27/2019 fluid chapter 1
7/16
8
FLUID PROPERTIES
Specific gravity: The ratio of the density of a substance to the density ofa standard substance at a specified temperature.
For liquids, water at 4oCr =1000kg/m3.
For gases, airr =1.205kg/m3.
Density: The mass per unit volume of a substance.
Specific weight: The weight of a unit volume of a substance.
Specific volume: The volume per unit mass of a substance.
7/27/2019 fluid chapter 1
8/16
9
Temperature: A measure of the internal energy level of a fluid.
Celsius scale: SI unit system s temperature scale.
Kelvin scale:A temperature scale that is independent of the propertiesof any substance.
The reference point in the Kelvin scale was changed
from the ice point, 273.15 K, to a much more precisely
reproducible point, the triple point, 273.16 K.
Fahrenheit scale: BG unit system s temperature scale.
7/27/2019 fluid chapter 1
9/16
10
Pressure: A normal force exerted by a fluid per unit
area; the compression stress at a point in a
static fluid.
Atmospheric pressure: The weight of an air column on
a unit area.
Absolute pressure: The actualpressure at a given position.
Gage pressure: The differencebetween the absolute pressure and
the local atmospheric pressure.
Vacuum pressures: Pressures belowatmospheric pressure.
7/27/2019 fluid chapter 1
10/16
11
State equation: : Any equation that relates the thermodynamic
properties of a substance to each other.
e.g. ideal gas law: , .
Specific heat: The energy required to raise a unit mass of a substance
one degree. For gasses, it is cp if the process occur at
constant pressure, or cv if the process occur at constant
volume.
7/27/2019 fluid chapter 1
11/16
12
As a consequence of compressibility, disturbances in the
fluid propagate at a finite velocity.
Speed of sound: The rate of propagation of a sound
wave through a fluid; (i.e. acoustic velocity).
For ideal gases:=
. = .
Compressibility: Fluid s density changes caused by the flow.
Compressibility coefficient:
For gases, the relation between pressure and density is
=
1
.
=1
,Bulk modulus of elasticity: when dealing with liquids.
=
7/27/2019 fluid chapter 1
12/16
13
Viscosity: Theproperty which determines the amount of its resistance
to a shearing force due to the interaction between fluid
molecules. It describes the fluidity of the fluid, i.e. how
easily it flows.
For small time increment:
where is the dynamic coefficient of viscosity.
tan .
, and
.
7/27/2019 fluid chapter 1
13/16
14
No slip condition: The velocity of fluid is zero at the stationary boundary.
The magnitude of depends on:
The cohesive force between molecules (dominant for liquid).
The momentum interchange between colliding molecules (dominant
for gases).
As the temperature increase, the viscosity of a gas increases and
viscosity of a liquid decreases.
For liquids, Andrade Eq.:
For gases: Sutherland Eq.:
.
.
.
7/27/2019 fluid chapter 1
14/16
Velocity Distribution:
Since depends on the velocity distribution,finding is the key for fluid dynamics
problems.
15
7/27/2019 fluid chapter 1
15/16
16
If P drops below Pv, liquid is locally
vaporized, creating cavities of vapor
and bubbles. Collapse of cavities is a
violent process which can damage
machinery, CAVITATION.
Vapor pressure ( Pv ) : The pressure at which a liquid boils and is in
equilibrium with its own vapor.
Newtonian vs. Non-Newtonian fluid
Fluids are classified based on
the relation between theapplied shear stress and the
deformation rate.
7/27/2019 fluid chapter 1
16/16
17
Surface Tension ( ): the magnitude of tension exerted by liquid surface on a
unit area of the objects that are in contact with the surface.
Liquid molecules near the
surfaces have a greater
attraction (stronger
intermolecular forces) to
each other.
The balance between intermolecular cohesive forces and the fluid-solid
adhesion forces.
The curved free surface in the tube is call the meniscus.
Water meniscus curves up ( 0 ); Mercury meniscus curves down up
( 130 ).
Capillary effect: the rise or fall of a liquid in a
small-diameter tube.
Recommended