View
0
Download
0
Category
Preview:
Citation preview
Diesel Engine Driven Welder & Generator DGW500DM-200
2016© Yamabiko Corporation All rights reserved35 Shin-Ujiagmi, Kita-Hiroshima-Cho, Yamagata-Gun, Hiroshima 731-1597 Japan
http://www.yamabiko-corp.co.jp/shindaiwa_global/ipe/E160722
Welding ProcessCivil Engineering RentalConstruction Mining OffshorePipelineFabrication
Repair FarmingMaintenanceRail Road
Service Truck
CC Mode Standard Rod Cellulose Rod Scratch TIG Gouging up to 9.5mm
Excellent
GoodExcellent Standard
Good
CV Mode Wire
Field of Application
Power FactorPower Factor
Single Phase
Receptacles
Rated Frequency (Hz)
Rated Current (A)Rated Voltage (V)
50 / 60
Continuous4.6 / 5.1 9.9
SpecificationAC GeneratorWelding DC Generator
(L)1680 x (W)700 x (H)950Overall Dimensions (mm)Dry Weight (kg) 614
MAX85
30-280 / 35-280
230
Current Adj. Range (A)Duty Cycle (%)Rated Voltage (V)Rated Current (A)
29.239.2
Single
8060
480
60-500 / 65-500Welding Rod Capacity (mm) Φ2.0 - Φ6.0Φ2.6 - Φ8.0Gouging Rod Capacity (mm) Φ3.2 - Φ9.5
20A x 2 28.6/ 26.0
Dimensions
Dual
Φ3.2 - Φ5.0
CC M
ode
14 - 29
23022.539.08060
480
14 - 40Φ0.6 - Φ2.4
CV M
ode
Voltage Adj. Range (V)Duty Cycle (%)Rated Voltage (V)Rated Current (A)
Welding Wire Capacity (mm) Φ0.6 - Φ2.0
Rated Speed (min-1)Phase Options
Rated Output (kVA)Rating
3000 / 3600
115 / 127 200 /220
1.0
Rated Speed (min-1)
No Load Voltage (V)
3000 / 3600
3-Phase
0.8
EnginePowered by Kubota V1505Model
Vertical, Water-cooled, 4 cycle diesel24.5 / 3000Rated Output (kW/min-1)63
1.498Engine TypeDisplacement (L)
Fuel Tank Capacity (L)27.0/ 3600
Definition of the iconsREALDUAL Welding Mode
2 connection of welding remote controlMax open circuit voltage Voltage regulation device Preset welding currentStop engine immediately
CC/CV Welding modeEasy arc startAdjust arc strength betweensoft and crisp
Engine
2016© Yamabiko Corporation All rights reserved35 Shin-Ujiagmi, Kita-Hiroshima-Cho, Yamagata-Gun, Hiroshima 731-1597 Japan
http://www.yamabiko-corp.co.jp/shindaiwa_global/ipe/
Diesel Engine Driven Welder & Generator
DGW500DM-200Control Panel
Shindaiwa’ s alternator is unique in coil winding. Welding power A, B, and AC generator are respectively driven by each coil winding. This feature ensures that each welding outputs has least electrical interference.
Special varnished reliable Shindaiwa’ s alternator, offers robust features of protection against sand gravel, dust, and extreme hot weather condition.
AC OUTPUT PANEL
10. Hour Meter
2. DC Meter
3. VRD Lamp
4. Output Control Dial
5. Emergency Stop Switch
6. Single/Dual Selector
7. Weld Mode Selector
8. Arc Control Dial
9. Rod Selector
14. Starter Switch
16. Remote ControlConnector
15. Fuel Meter
1. AC Meter
DUAL WELDING MODE ROBUST ALTERNATOR
1 23
57
8
21
9
10 11
12 13 14 15
16
19 20 22
23
46
7
8
17 18
4
9
16
19
32
20. 1-P Breaker
19. Ground Fault Circuit Interrupter (GFCI) Receptacle
11. Monitor Lamp
12. VRD Switch
13. Idle Control Switch
21. 3-P/1-P Output Terminal
22. Main Breaker
23. Bonnet Grounding Terminal
You can stop the engine immediately in emergency conditions to avert hazardous situations.
EMERGENCY STOP VRD
VRD, or Voltage Reduction Device reduces no-load voltage when the equipment does not perform welding to minimize electrical shock hazard.
17. Weld Terminal A
18. Weld Terminal B
WIRE ROD SELECTION
RealDual(R) 500 accommodates variety kinds of rod categories which includes AWS7018 of low-hydrogen’ s and AWS7010 of high cellulose’ s.
Features
Recommended