Field campaign 2009 - Hyytiälä

Field campaign 2009 - Hyytiälä

Aims

1) Fully mapped understory tree layers, 2-3 sites, preferably with variation in site fertility and/or upper tree layer.

To investigate LiDAR data in the assessment of density and species admixture in the understory layer.

2) Collect data on tree growth, bore corer (ir5a(2004-2008)) and dbh, above bark id(200#-2009).

To see if LiDAR features explain intertree variation in ig.

3) To add trees in the experiment utilizing the students’ workforce.

To support species classification research efforts in LiDAR and image data.

Implementation

June 15 Sept 15 Pauliina Aarne in Hyytiälä

June Aug IK in Hyytiälä, 18 days, Office preparations 6 days

Sept Oct Putting database in order

BLOG: http://evoliitti.blogit.fi/

Costs: ca. 28000 €, excl. marv1-teachers, salary + travel + accommodation. UH ~ 75%, UJ ~ 25%.

Output 1

MARV1 5 plots, 2.68 ha, 3090 trees 1072triangulated positions, 640 h/hc obs

Understory 2 plots, 6060 m and 30100 m, 5 m bufferMapping Upper layer ~220 + 180: dbh, h, hc, ir

Lower layer ~2100 + 1500 trees: xy, sp, h

Old plots P1,P2,P3,P4,P6; 5050 m, 52 yrs. Pine.Tallying + sample tree sub-plot with 50dominant –co-dominant trees (h/hc/ir).In total ~ 2050 trees. Previous 2002.

LK1, LK2, 50x50-m, 100-yr-old, pine, barrendbh, h, hc, ir in all trees.In total 200 trees. Previous 2002.

Output 2

Texas – pine – spruce plot. 40 x 100 m. 60-yr.h in 33%, hc and ir in 100% trees | hrel > 0.5425 trees. Previous 2005.

FT/KM, pine – spruce, r = 22 m. 40 yr.h, hc, ir in all trees.In total 250 trees. Previous 2002.

TELE – pine-spruce-alder-birch, 40 yrs.h/hc 33% of trees. NO ir data.400 trees, Previous 2005.

S1, S2, S3, S4, S5, S6 Spruce plots, 55 yrs.Tallying only. 2100 trees. Previous 2002.

B1, B2, B3, B4. Birch plots. 450 trees. 2010.

IN TOTAL

• Ca. 12250 trees were identified / tallied, incl. understory

1.85 € / tree

• Bore corer observations in ~ 1300 trees (ir(2004-2008))

• DBH re-measurements in ~ 5300 trees (id)

• h/hc measurements in ~ 2000 trees

Quality issues

May 2009; simulation says 15-cm xy-accuracy in understory mapping is possible using the tape-method. Exterior orientation. Strip level, between strip and block level accuracy. Evaluated continuously.

Re-measurements in dbh, h/hc, ir

Some problems with the older data, mostly coherent.

dbh accuracy 2-3 mm, h ~ 0.3 m, hc ~ 0.8 m

System calibration with Vertex and other eq.?