View
0
Download
0
Category
Preview:
Citation preview
St Columb’s College
February March 2018
Revision Pack
Year 12
How to Revise
There are a few things that you can do to make your
revision for the Christmas Exams as effective as possible.
Revision Environment:
You should try to make sure you have good surroundings
when you are trying to revise.
Find a quiet place so you don’t get distracted
Make sure you are sitting comfortably
Keep background noise a minimum e.g. TV, radio.
Make sure the area is well lit so you don’t strain your eyes.
Revision plan:
It is suggested that making a revision plan helps some people to revise more
effectively. Included in this pack you will find a suggested revision timetable. You
can download more copies off the school website.
Make a list of all your exam subjects and try to assign an amount of time
needed for each subject. For example if there is an area that you find
difficult, then maybe you should give more time to this subject.
Revise often and try to do a bit everyday.
Break your revision time down – aim to study each subject for no more than 15-
20 minutes at a time.
Include time off and breaks in your revision plan. Aim to take a 5 minute break
after every session.
Remember to include variety in your plan – not only in the subjects you revise
but also the techniques you use.
Revision techniques:
Here are a few ideas as to how you can revise most
effectively.
Create memory aids such as diagrams or mnemonics
(e.g. for the order of colours in the rainbow:
Red, Orange, Yellow, Green, Blue, Indigo, Violet
- Richard Of York Gave Battle In Vain).
Write key facts on pieces of cards and display them
around your house or even on the way to school.
Study with someone at home or with a friend and test each other’s knowledge
Remember to reward yourself. Use rewards as incentive to do the revision.
On the day before the exam:
Use your revision tools (e.g. diagrams, mnemonics etc) to check facts
Keep calm – don’t try to learn new topics so close to an exam.
Don’t stay up all night.
Please remember that revision isn’t a competition. It’s not about who stayed up all
night and revised the longest. It is about finding the right revision methods that suit
your way of learning. Try out some of the techniques mentioned and you will find that
revision isn’t as scary as you first thought. Getting started is often the hardest bit.
Some Useful Revision Websites
http://www.nwlg.org/pages/resources/knowitall/index.htm
http://www.bbc.co.uk/schools/ks3bitesize/
http://www.bbc.co.uk/northernireland/schools/
Revision Timetable
Week 1 2 3 4 5
Day Revision
Slot 1
Revision
Slot 2
Revision
Slot 3
Revision
Slot 4
Revision
Slot 5
Revision
Slot 6
Time
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
Revision (February 2018)
Subject Biology
Year Group Year 12
Examination length 1 hour paper
Areas/
topics
to be
covered
for
revision
Osmosis and Plant Transport - you should be able to show that you can: (a)carry out investigations, collect data and draw conclusions to demonstrate the process of osmosis (across selectively permeable membranes) in plant tissue, to include: - the change in size and mass of plant and be able to identify changes in plant cell structure that occur in plasmolysed and turgid cells due to osmosis at a microscopic level (b) explain osmosis as diffusion of water from a dilute solution to a more concentrated solution, through a selectively permeable membrane; (c) explain how osmosis causes plant cells to become plasmolysed and turgid; (d) understand the role of the cell wall in limiting the entry of water; (e) understand that plants use water for support, transport, transpiration and photosynthesis; (f) use a potometer (bubble potometer and weighing method) to gain an understanding of the process of transpiration in plants; (g) define transpiration as evaporation from leaf cells followed by diffusion through stomata; and (h) investigate the factors affecting the rate of transpiration (wind speed, temperature, surface area and humidity) and be able to analyse data collected to calculate the rate of transpiration. Circulatory System (a) understand the role of the circulatory system as the transport of materials and protection against disease; (b) understand that the circulatory system transports blood cells (red blood cells carrying oxygen) and materials such as digested food products, carbon dioxide, hormones and urea around the body; (c) through examining a heart: -identify the four chambers of the heart; -understand how its structure relates to the pumping action and sequence of blood flow in a double circulatory system; -identify the four blood vessels associated with the heart – the vena cava and pulmonary artery carrying deoxygenated blood and the pulmonary vein and aorta carrying oxygenated blood; and
identify the coronary blood vessels; (d) understand the role of the different types of blood vessels:
arteries – carry blood under pressure away from the heart (usually oxygenated blood);
veins – carry blood back to the heart and have valves which prevent the backflow of blood (usually deoxygenated blood); and
capillaries – allow the exchange of material with tissues through permeable walls; and (e) identify the blood vessels entering and leaving the heart, lungs, liver and kidney, and their functions. Know their names (g) identify the blood vessels entering and leaving the heart, lungs, liver and kidney, and their functions. (h)understand that:
a blockage of the coronary vessels caused by the build-up of cholesterol deposits restricts blood flow to the heart muscles, causing death of the heart muscle cells;
a blockage in blood vessels to the brain leads to a stroke, causing brain cell death and reduced brain function;
in both cases blockage leads to less oxygen and glucose reaching cells (heart muscle and brain) and less cell respiration; and
certain factors increase or reduce the risk of heart disease and strokes, and interpret secondary data to evaluate these risk factors and
(i) investigate the effects of exercise on the pulse rate and know how the circulatory system benefits from regular exercise – strengthened heart muscle and increased volume of blood pumped per beat at rest
Immunity- understand the role of Pasteur’s Swan Neck experiment in refuting earlier theories about spontaneous generation, know the types of disease-causing microorganisms and how they are spread, prevented and treated including:
bacteria (gonorrhoea, chlamydia, salmonella and tuberculosis); viruses (HIV leading to AIDS, cold and flu, mumps, measles, polio and rubella); and
fungi (athlete’s foot); and understand the defence mechanisms of the body, to include: the skin, mucous membranes and blood clotting; Lymphocytes – their production and action in response to antigens; and the process of phagocytosis – engulfing and digesting microorganisms by white blood cells (phagocytes). Understand that immunity to disease is produced by raised antibody levels in the blood and that immunity can be: natural – innate and acquired; or artificial – active and passive; understand the role of vaccines, to include:
the use of modified disease-causing organisms to produce raised antibody levels in the blood - the role of booster vaccinations and the interpretation of graphs of blood antibody levels - the development of the first vaccination by Jenner as an example of how scientific understanding and theories develop the importance of immunisation when travelling to certain countries (specific details of immunisation programmes are not required) understand that antibiotics, for example penicillin, are chemicals which are used against bacterial diseases to kill bacteria or reduce their growth understand the implications of the following on the health of the population - overuse of antibiotics leading to bacterial resistance, resulting in the development of ‘superbugs’ such as MRSA; and procedures used to reduce the incidence of ‘superbugs’ and why their eradication is difficult; Use secondary data to evaluate the effectiveness of measures that have been introduced to reduce the number of infections caused by antibiotic-resistant bacteria Safely use aseptic techniques to inoculate, plate and incubate bacteria and investigate the effect of different antibiotics on their growth Drugs and Alcohol - understand how drugs may be used or misused: - alcohol and its effects on the individual and society: binge drinking; the effect of drinking on the development of the foetus; reasons why people drink; and evaluation of strategies for reducing alcohol intake; tobacco smoke: tar – cause of bronchitis (narrowing of bronchi and bronchioles), emphysema (damage to alveoli reducing the surface area for gas exchange) and lung cancer (abnormal cell division); nicotine – addictive and affects heart rate; and carbon monoxide – combines with red blood cells to reduce the oxygen-carrying capacity of the blood; and the effects of cannabis and cocaine on the individual and society; understand how scientific evidence about the use and misuse of some of the drugs listed contributes to changes in legislation in areas such as smoking bans, licensing regulations for bars and clubs, and the legal position of cannabis collect data from secondary sources on the results of the ban on smoking in relation to the incidence of lung cancer
Question type(s)
The exam consists of one single one-hour paper. The paper will consist of a number of compulsory structured questions that provide opportunities for short answers, extended writing and calculations. The interpretation of secondary data and the interpretation or displaying data graphically could be included.
Equipment requirements for examination Black pen, Pencil, ruler, rubber, & calculator.
Revision tip(s) Use your class booklets for thorough revision. Practice using previous homework and test questions. Use the specification as a checklist for your revision.
Revision (February2018)
Subject Business Studies
(Applied)
Year Group Yr12
Examination
length
1 Hour
Areas/topics
to be
covered
for revision
Unit 1 – Business Start-Up
Unit 2 – Production
Unit 3 – Marketing
Unit 5 – Managing People
Unit 6 – Business Growth
Unit 7 – Business Plan
Unit 4 – Cash flow forecasts and Break-even only.
Question
type(s) (e.g.
diagrams,
map work,
sources etc.)
There will be a number of structured questions – possibly 4. A structured
question is one that is broken down into 2a,2b,2c etc. Each question will be
based on a small case study.
Equipment
requirements
for
examination
Pen, pencil, rubber, ruler and calculator.
Revision
tip(s)
Make sure you read and understand the CHECKLIST at the end of each
section (e.g. 1.2 etc.). Look for the key word in each question e.g. Analyse,
Discuss, Evaluate, State, etc.
Revision (February2018)
Subject Business Studies
(Traditional)
Year Group Yr12
Examination
length
1 Hour 20 minutes
Areas/topics
to be
covered
for revision
Unit 5 – Managing People
Unit 6 – Business Growth
Unit 7 – Business Plan
Unit 4 – Cash flow forecasts and Break-even
All Units to be completed.
Question
type(s) (e.g.
diagrams,
map work,
sources etc.)
There will be a number of structured questions – possibly 4. A structured
question is one that is broken down into 2a,2b,2c etc. Each question will be
based on a small case study.
Equipment
requirements
for
examination
Pen, pencil, rubber, ruler and calculator.
Revision
tip(s)
Make sure you read and understand the CHECKLIST at the end of each
section (e.g. 1.2 etc.). Look for the key word in each question e.g. Analyse,
Discuss, Evaluate, State, etc.
Revision (March 2018)
Subject DAS/Chemistry
Year Group 12
Examination length 60 minutes
Areas/topics
to be covered
for revision
(and amount
of marks to
be allocated)
Topic-
Rates of reaction
Quantitative Chemistry
Metals and the reactivity series
Energetics
Marks approximately same for all topics
Question
type(s) (e.g.
diagrams,
mapwork,
sources etc.)
Structured type questions. Fill in the answers in the spaces provided
Label diagrams/ draw diagrams of apparatus
Formula recall and application. Writing formula and balancing equations
Extended writing/descriptive. Prediction of reactions.
Chemical calculations.
Graph construction and analysis
Equipment
requirements
for
examination
Pen
Calculator
Ruler, pencil and eraser for graphs
Revision
tip(s)
Learn all equations and practise their application
Practice drawing diagrams of apparatus (accurately)
Practice graph questions from year 12 notes.
Revision (February 2018)
Subject English Language
Year Group 12
Examination length 1 hour 30 minutes
Areas/topics
to be covered
for revision
Reading Non-Fiction 50%
Functional Writing – 50%
Question
type(s) (e.g.
diagrams,
mapwork,
sources etc.)
Reading:
Comment on language/style/tone of a non-fiction piece and say how it
contributes to its overall effectiveness.
Writing:
Spelling, Grammar and Punctuation- 1/3 of marks
Appropriate paragraphing
Awareness of audience
Tone appropriate to purpose
Equipment
requirements
for
examination
Pen
Revision
tip(s)
This is a Mock GCSE in preparation for the Unit 2 Module in June 2018
Revision (February 2018)
Subject Engineering
Year Group 12
Examination length 1 hour 30 minutes
Areas/topics
to be covered
for revision
Unit 1 – Design and Graphical Communication (30% Exam)
Analysing a Design Brief/Selecting a solution
Idea Generation
Technical Drawing
Engineering Terms
Analysis of a product and its components
Design Specification
Testing of Design Solutions
Unit 2 – Product Manufacture (30% Exam)
Materials, their properties, uses and finishes ( metals & plastics)
Tools and Equipment used in workshop / Health and Safety in the workshop
Processes – riveting and Threading metal Know the tools used and stages)
Permanent and semi permanent joining methods
Mechanical components – nuts, bolts , washers, and bearings etc rivets
Smart materials – how they work and typical uses
Quality control & Quality assurance
Modern manufacturing – CIM, CAD/CAM, ASRS, AGVs (advantages/disadvantages)
Analysis of an ‘folding step’ – Materials, Components, How it operates (sketch)
Question
type(s) (e.g.
diagrams,
mapwork,
sources etc.)
Unit 1 questions will be mostly short answers (one or two sentences) based on the theory that
you have covered. In the unit 1 however, you will be required also to generate ideas and
produce a 3D sketch of your final outcome.
Unit 2 questions will be mostly short answers (one or two sentences) based on the theory that
you have covered on the above topics. Some questions may require diagrams to help explain
your answers (diagrams should be clearly drawn and labelled)
Sources for information include – Engineering theory booklet & technologystudent.com
Equipment
requirements
Pupils should ensure that they are equipment with a pen, calculator and appropriate drawing
equipment i.e. HB pencil, ruler and eraser
Revision tip(s) Also make sure that you know the elements of the design process you have covered. It would
also be an advantage to practice your 3D sketching skills in advance. Use the theory booklet
and worksheet to produce your own key notes on each topic. Know the meaning all technical
words and terms eg silver halide and toughness.
Revision (February 2018)
Subject French
Year Group 12
Examination length 1h30
Areas/topics
to be covered
for revision
Context 1: The Individual – Sections 1A and 4A of Voilà 4 on Relationships, Section 1B on
leisure activities
Revise the vocabulary on pages 7, 11 and 65 of the Workbook.
Context 2: Citizenship – Section 3D on Media and Communications (pages 130 – 131 and 134 –
137)
Revise the vocabulary on page 58 of the Workbook
Health and Lifestyle - Sections 1D, 3A and 3B
Revise the vocabulary on pages 19, 46 and 50 of the Workbook
Environmental issues - Section 4B
Revise the vocabulary on page 68 of the Workbook
Local Area – Section 1C
Revise the vocabulary on page 15 of the Workbook
School Life and Future Plans - Sections 1E, 4C and 4D
Revise the vocabulary on pages 23, 71, 74 of the Workbook
Revise the grammar covered in these sections, too.
Marks to be allocated: Writing: 25; Speaking: 25; Reading: 25; Listening: 25
PLEASE NOTE there will be a 45 min Listening paper followed by a 45min Reading paper
Question
type(s) (e.g.
diagrams,
mapwork,
sources etc.)
In the Reading examination you will be matching up numbers and letters and writing answers in
French and in English. Be familiar with the French instructions in Voilà 4 and with question
words.
Equipment
requirements
for examination
A pen is needed for the examination
Revision tip(s) Revise the vocabulary for the topics above - use the Workbook and the GCSE vocabulary booklet.
Familiarize yourself with the Reading examination by doing practice questions from the past
paper booklet.
Year 12 Further Maths Revision List February 2018
Year Group Year 12 Further Maths classes
Miss Donaghey, Mrs Duffy, Miss Kerr
Examination length 2 hours
Topic Resource –Add Maths text unless otherwise stated
Algebraic Fractions Ex 1A-1F
Trigonometric Equation Ex 4a-4c
Trigonometry in Triangles Ex 5a-5d
Differentiation Ex 6a-6e, Ex7e-7f, Ex 8a, Ex8e
Integration Ex 9a-9d, Ex 10a
Logs Ex 12a-12g, Ex 13a-13c
Matrices Ex 11a-11h
Vectors Ex 14a-14f, Ex19f
Displacement-time graph Ex 15a
Constant acceleration Ex16a-16b
Simultaneous Equations Ex3a
Equipment
requirements
for
examination
Pen, pencil, ruler, eraser
Calculator
Revision
tip(s)
Revise the topic using notes
Attempt worked example given in notes
Attempt questions in textbook
Attend any after school classes available
Revision (February 2018)
Subject Geography
Year Group 12
Examination length 1 ¼ hours
Areas/topics
to be covered
for revision
(and amount
of marks to be
allocated)
Population
Factors affecting birth & death rates
World population growth (since 1700) and its causes – MEDCs & LEDCs
Population structure – population pyramids – differences between MEDCs & LEDCs (compare &
contrast)
Dependency – youth & aged dependency; assess the social & economic implications of each
GIS – its uses, advantages – interpretation of data presented
Migration – push & pull factors;
CASE STUDY – Migration into the UK – numbers migrating, their origins and destination; impacts on
services and the economy – be able to evaluate impact
Settlement
Key words: site, situation
Factors affecting choice of site - Defensive site, wet point site and bridging site
Settlement hierarchy –based on population size, functions (high & low order), range & threshold (refer
to places)
Land use zones – CBD. Inner city, suburban residential, industrial and rural-urban fringe (refer to
places)
Causes of urbanisation
Case study – LEDC Growth, location and characteristics of shanty town areas.- Sao Paulo
Case study- MEDC city (The Quay, Derry) one urban planning scheme that aims to regenerate and
improve the inner city zone.
Development
The Development Gap
identify and describe differences in development between MEDCs and LEDCs using social and
economic indicators
assess the effectiveness of social and economic indicators of development and demonstrate an
awareness of the advantages of using the Human Development Index.
Factors that affect development; historical, environmental, dependence on primary activities, debt and
politics
The “ONE” case study - describe one named strategy that is attempting to reduce the global
development gap and explain how it attempts to do so, identifying:
Factors contributing to unequal development
Define globalisation and understand how it helps and hinders development. with reference to one case
study from an LEDC - India
understand how world trade creates problems for LEDCs
Mapskills
Grid references, scale, direction, height on maps.
Identify the following on OS maps: site characteristics, general functions, hierarchy and land use zones.
Question type(s) (e.g.
diagrams, mapwork, sources
etc.)
Diagrams
Data response questions
Extended questions examining the case studies
Equipment requirements for exam. Blue or black pen, Pencil, Ruler
Revision tip(s) Pupils should – Use mind maps to summarise information.
Make lists of key words and their meanings and learn them – test yourself.
Use websites such as the BBC GCSE Bitesize website to revise
Use Common Assessments (common assessment folders will be re-distributed from class teachers) to identify and correct
problems with examination techniques.
Know and understand and be able to identify command words in questions.
Learn key definitions
Study previous Common Assessments
Learn case study facts – make case study cards
Revise using their booklet Theme A; People and where they live and Theme B Development
Remember – statement – consequence – elaboration
Quote figures from graphs etc (use the resource material when answering questions)
February 2018
Subject German
Year Group 12
Examination length
1 hour 30 minutes
Areas/topics
to be
covered
for revision
The questions will be on a mixture of topics that you have studied over the
past three years: travel/holidays/an accident, home/home town, shopping,
leisure activities/hobbies/media/Christmas markets, school, future
plans/part time work/career/volunteering, family/relationships.
Question
type(s)
There will be some short passages and some longer passages in German
(gap-fill, e-mails, brochures) with multiple choice, matching pictures,
matching names to sentences, True/False/? and/or questions in English.
Equipment
requirements
for
examination
You need a black pen. You will be allowed to write onto the examination
paper.
Revision Tips
You cannot revise specific vocabulary for this, but you might look over
general notes, look through your textbook, or practice on the internet
http://www.klar.co.uk/
http://www.languagesonline.org.uk/
http://www.ukgermanconnection.org/microsites/?location_id=5
http://www.deutsch-lernen.com/
http://www.bbc.co.uk/schools/gcsebitesize/german/
Revision (February 2018)
Subject History
Year Group 12
Examination length 1hour 15 minutes
Areas/topics
to be covered
for revision
The Cold War 1945-1956
Communism v Capitalism
Events of 1945 Yalta & Potsdam
Establishing the Buffer Zone
Germany: Berlin Airlift
Hungary
Vietnam
Question
type(s) (e.g.
diagrams,
mapwork,
sources etc.)
100% exam
One Source section with four questions, 4 mark, 6 mark, 8 mark, 10 mark
One Essay question worth 16 marks + 5 SPaG
Equipment
requirements
Blue/ Black pens
Revision tip(s) For each event learn the following things:
Date/ People involved
Causes of event
Details of event
Results of event
Use textbook, hardback notebook and revision materials on shared documents.
Make notes on topics in spider diagram format
Revision (Feb Mar 2018)
Subject Information Technology
Year Group Year 12
Examination length 2 hours
Areas/topics
to be covered
for revision (and
amount of
marks to be
allocated)
Knowledge of ICT Components Hardware
Identify external component parts of a typical home PC (Input, output and
storage)
Memory: ROM, RAM and cache
System Software: operating system, GUI.
Data and Information
Information and data
Features important in form design (such as use of tick boxes, colour, font,
position and instructions; Gathering Data)
OMR and OCR
Data verification and validation techniques: (type, range, presence and length,
check digit)
Data Portability
Data compression and the software needed to compress/decompress data
File types: jpeg, mpeg, gif, txt, csv, rtf, mp3, mp4, MIDI, pdf, html and zip;
Software questions
Unit 1: Database, spreadsheet, presentation. Unit 2: Game and website.
Question type(s) (e.g. diagrams,
mapwork, sources etc.)
A combination of 1, 2, 3, 4, 6 & 8-mark questions.
Equipment requirements for
examination
Blue or black pen
Revision tip(s) Use the Year 12 notes provided by your current teacher.
Use your pukka pad revision book for revision and BBC Bitesize.
Practice using the past papers on shared documents.
Revision (February 2018)
Subject Irish
Year Group 12
Examination length 1 hr 30 mins
Areas/topics
to be covered
for revision
(and amount
of marks to be
allocated)
This exam is made up from two past paper exams, therefore while the following topics are
definitely on it there may be vocabulary associated with other topics also evident. Thorough
revision is required.
Holidays / Gaeltacht visits
My Locality
School Life
Daily routine
Myself and Others
School Life
Hobbies
Celebrations
New Technologies
The Environment
Careers
Marks to be allocated: Listening: 25 Speaking: 25 Reading: 25 Writing 25
PLEASE NOTE there will be a 45 min Listening paper followed by a 45min Reading paper
Question
type(s) (e.g.
diagrams,
mapwork,
sources etc.)
Multiple Choice
Sentence Completion
True or false
Grid Filling
Reordering of sentences
Comprehension with questions in both Irish and English
Equipment requirements for examination Pen
Revision tip(s) Read class notes and highlight important vocabulary.
Copy highlighted vocabulary into a revision book.
Learn vocabulary lists.
Look at vocabulary, cover it up and see if you can say it without seeing it.
Practice writing sentences on each topic.
Test yourself.
Year 12 Ordinary T6 Mathematics: February Exam 2018
60 minute Non-Calculator Paper. Total Marks 50.
60 minute Calculator Paper. Total Marks 50.
Topics
CCEA
Textbook
Chapter
AQA Textbook
Reference
Revised
Ratio 8 7
Number Facts 2 Corbett
Formula – substitution and change of formula 20 12
Area and surface area 36,37 25,30
Standard Form 11 6
Indices 15 5
Recurring decimals 12 2,9
Surds 13 9
Inequalities including regions 30 16
Probability 47 40
Reciprocal 10 5
General statements /show that Corbett Corbett
Forming expressions or equations 14 10
Fractions 5 2
Compound Measures 39 15
Angles 32 23
Transformations-Reflections, Rotations,
Enlargements, Translations 41
27
Dimensions 37 31
Volume 36,37 30
The questions in the exam range from easy to challenging. Pupils will be able to attempt most questions.
Before the exam
Quickly check through all of the topics above, and then select those which are the highest priority
for you.
Don’t simply read over topics – DO QUESTIONS (you’ll remember more that way!)
Try as many of the questions listed above as you can.
Look up each topic in your hardback notebook. That’s what it is for!!
Re-do some of your homework questions on the topic and check your answer from the correction in
class.
Use CCEA past paper questions.
Try out the calculations. Check that you understand which buttons to press and look up the
instruction book (or ask someone) if you’re not sure.
Try to cover a couple of topics at a time – some of them are quite short.
Ask your teacher about anything that you’re not sure about.
Attend any of revision classes that are on.
During the exam
Don’t rush – you will enough time. Don’t go too slowly either.
Attempt every question and every part of every question. LEAVE NO BLANKS!
Show all steps. Marks go for the working out as well as the answer – even completely correct
answers might not get full marks without the working!
Check over all your work at the end.
Remember to use Corbett Maths or MathsWatch to help with revision.
Revision (Feb Mar 2018)
Subject MIA
Year Group YR12
Examination length 1 hour 30 mins
Areas/topics
to be covered
for revision
(and amount
of marks to
be allocated)
Film Genre; Iconography, themes, style
The five areas of film language:
Camera & Editing; Shot types and angles, types of editing, eg, montage, cross-cutting.
Sound; foley, diegetic, non diagetic, music, pitch and pace.
Lighting; high key, low key
Mise-en-Scene
How the areas of film language help to add atmosphere and make it visually appealing to
an audience. How types of film language are typically used in certain genres.
Framing and Composistion.
Animation. Stop motion, rotoscoping, pixilation, CGI.
Film Industry and Contexts
Health and Safety
Industry Contexts Funding
Production Distribution Exhibition and the Audience
Production Management and Legal Considerations
Professional Roles
Question
type(s)
(e.g.
diagrams
,
mapwork
, sources
etc.)
http://www.rewardinglearning.org.uk/microsites/moving_image_arts/revised_gce/support/index
.asp
(2nd link from bottom in support, specimen assessment paper, (SAM)
Equipment
requirements
for
examination
ELC
Revision
tip(s)
Use the CCEA specification for revision. (SAM)
Revision (Feb Mar 2018)
Subject MUSIC
Year Group GCSE YEAR12
Examination length 1hour 30 mins
Areas/topics
to be covered
for revision
(and amount
of marks to be
allocated)
Part 1 Listening and Appraising
Q1, 2 & 3 Repeated Patterns in Music
Q4 is an unheard piece of music.
Q5 is a question based on the Music Industry
Total marks 60
Part 2 Listening and Appraising
Answer Q4-Q9 only
Q4 & 5 Incidental Music
Q6 is an unheard piece of music
Q7 & 8 Vocal Music
Q 9 is an unheard piece of music there will be 3 awarded based on the quality of your written
communication.
Total marks 80
Question
type(s) (e.g.
diagrams,
mapwork,
sources etc.)
A mixture of short answers and multiple choice.
Paper 2 has a question in which 3 marks are available for Spelling and Grammar.
If the questions offers 5 marks, please give 5 valid-musical points or more.
Equipment
requirements
for
examination
Black pen or blue. Pencil for notating pitch /rhythm dictation. Pupils write on script
Revision tip(s) Listen to set works with scores
Review all annotated scores and notes given.
Organise your notes into sections according to which area of study they come from.
Revision (Feb Mar 2018)
Subject PE
Year Group 12
Examination length 1 hour 30 minutes
Areas/topics
to be covered
for revision
(and amount
of marks to
be allocated)
Health Define the term health, for example: ‘a state of complete physical, social and mental well-being and not merely the absence of disease or infirmity’ (World Health Organisation); Explain how to maintain physical, social and mental well-being and the possible consequences of not maintaining it. Fitness Define physical fitness, for example: ‘the ability to perform physical tasks efficiently and effectively’; Explain that physical fitness is a relative concept; you can be fit for one task but not fit for another; Explain the difference between physical health and physical fitness; Explain the meaning of the terms exercise and training; Key Influences on Lifestyle Know and understand how the following key influences, or combinations of key influences, impact on their own and others’ ability to sustain involvement in physical activity: − personal characteristics and the nature of physical activities, such as introvert or extrovert, motivation, arousal and competition; − parents, siblings and peers; − facilities, such as availability, location, access, public or private sector; − experiences in physical activities, for example school, club, coaching, excitement and success; − affluence; − work–leisure balance, for example occupation or type of work; − cultural heritage; and − alternative leisure activities, for example cinema, electronic games, internet and shopping; Nutrition Define the term nutrition (diet) and explain why we need to eat food; Know and understand the components of food: carbohydrates, fats, proteins, vitamins, minerals, dietary fibre and water; Know and understand the characteristics of a balanced, healthy nutrition (diet) Understand the influence of tobacco, alcohol, rest and sleep
Components of fitness know and understand the components of exercise and physical fitness (aerobic energy production, anaerobic energy production, muscular power, muscular strength, muscular speed, muscular endurance and flexibility) and be able to give examples of activities that demonstrate each of them;
Methods of training – Continuous, Interval, Fartlek, Weight training, Altitude training, HIIT training Principles of Training – SPORT PR FITT principle
Short term / immediate effects on the : respiratory system, circulatory, muscular, skeletal and digestive.
Long term effects / adaptations of effective training on the : respiratory system, circulatory, muscular, skeletal and digestive.
Question type(s) (e.g. diagrams,
mapwork, sources etc.)
- standard written paper format
- short questions
- data based/ scenario style questions
Equipment requirements for examination Pen / Pencil
Revision
tip(s)
- revise class workbook
- use www.exampro.co.uk website as revision source
- re-read class notes and feedback from homeworks /
and class tests
- review past paper questions set for class and homework
Revision (Feb 2018)
Subject DAS/Physics
Year Group 12
Examination length 1hr
Areas/topics
to be covered
for revision
(and amount
of marks to
be allocated)
Topic- Waves, sound and light p74-p107
Types of waves, labelling waves, wave equation, describing different wave
movement, analysis of amplitude and wave length, uses of ultrasound, echo
questions, reflection and refraction of light descriptions, definitions and diagrams,
dispersion, electromagnetic waves, uses and dangers.
Topic – Electricity p108-142
Electrostatics, uses, dangers and how charges interact with each other.
Simple circuits, Ohms law, current- voltage relationships, energy in the home.
Graph Skills
Plot a graph and calculate the gradient and/or intercept
Question
type(s) (e.g.
diagrams,
mapwork,
sources etc.)
Definitions
Label diagrams
Formula recall and application
Extended writing/descriptive
Graph construction and analysis
Equipment
requirements
for
examination
Pen
Calculator
Ruler, pencil and eraser for graphs
Revision
tip(s)
Learn all equations and practise their application
Practice drawing ray diagrams (accurately)
Practice graph questions from y11 module
Revision (February 2018)
Subject Religious Education
Year Group 12
Examination length 1 hour 30 mins.
Areas/topics
to be covered
for revision
(and amount
of marks to be
allocated)
War and Peace • the debate about pacifism, taking account of different
religious and ethical viewpoints
• the Just War tradition
30 marks
Personal and Family Issues
• Christian views on the meaning and purpose of sexual
relationships, taking account of the diversity of ethical
positions within Christianity
• Christian teachings about the benefits and challenges of
marriage and divorce, taking account of the diversity of
ethical positions within Christianity
30 marks
Matters of Life and Death
• the debate about abortion, taking account of social,
political, biblical, Church and other ethical viewpoints
• the views of pro-life and pro-choice groups
• the debate about euthanasia, taking account of social,
political, biblical, Church and other ethical viewpoints
• the debate about capital punishment, taking account of
social, political, biblical, Church and other ethical
viewpoints.
35 marks
SPaG: 5 marks
Total = 100 marks.
Question
type(s) (e.g.,
sources etc.)
Short knowledge questions
Extended knowledge and understanding questions
Extended evaluation questions
Equipment requirements
for examination
Black biro
Revision tip(s) Spend time learning class notes.
Go to the GCSE Bitesize website for RE and chose Christianity/Ethics and revise.
Make sure you can write developed answers for 10 mark questions.
Revision (Feb Mar 2018)
Subject SA science (Chemistry)
Year Group 12G
Examination length 45mins
Areas/topics
to be covered
for revision
(and amount
of marks to
be allocated)
Chapter 7: acids and bases with particular emphasis on the chemistry of baking soda and
baking powder.
Chapter 8: world around us with particular emphasis on tectonic plate movement.
Chapter 9: elements and compounds with particular emphasis on the PT, atomic structure,
reactions and the reactivity series.
Question
type(s) (e.g.
diagrams,
mapwork,
sources etc.)
Knowledge and understanding of course content will be assessed through structured
questions and the interpretation of graphical and tabulated data.
Equipment
requirements
for
examination
Pen, pencil, ruler, eraser and calculator.
Revision
tip(s)
Use your class booklets for thorough revision. Practice using previous homework and test questions. Use the specification as a checklist for your revision.
Revision (February 2018)
Subject Spanish
Year Group 12
Examination length 90 minutes Reading and
Listening
Areas/topics
to be covered
for revision
(and amount
of marks to be
allocated)
Travel and Tourism: Destinations and choices. (Holidays)
Weather
The City
Travel in the city/ directions
Food and Restaurants
Festivals/ Fiestas.
School Life (describing your school day and your school; facilities, clubs, teachers,
subjects, plans for the future)
Relationships: families and friends. Describing people: physical descriptions and
characteristics
Daily routine
Household chores
Jobs and the World of Work
Free time and leisure activities (sports, television, cinema, books, music, shopping
and other hobbies)
Technology
Where
My Local Environment: Advantages and Disadvantages (my city, my house, my
bedroom).
Health and Lifestyle: diet, exercise and illness.
Environment
* Grammar: Present Tense; Reflexive Verbs; Preterite Tense; Imperfect Tense; Immediate
Future; Future Tense; Conditional Tense; expressions to express an opinion, prepositions of
place; adjectival agreement; uses of verb Ser versus Estar; verbs plus an infinitive;
demonstrative adjectives and pronouns; direct and indirect object pronouns; comparative and
superlative adjectives. (Check your grammar notes for more details.)
Question
type(s) (e.g.
diagrams,
mapwork,
sources etc.)
Fill in blanks with the missing word; True/False; write down the right letter; write down the
right number; fill in the blank with words that mean the same; answer questions in Spanish
and in English.
Equipment
requirements
for
examination
Pen and a spare.
Revision tip(s) Good recognition of a wide range of general vocabulary is required for the Listening and
Reading examinations.
The CCEA website has a detailed list of vocabulary for all topic areas and is a very good
revision tool for the Listening and Reading examinations.
¡Suerte!
Yr 12 Technology and Design Revision (February 2018)
Subject Technology and Design
Examination length = 1 hour Examination Weighting = 100%
Areas/topics
to be covered
for revision
Unit 3 – Product Design
Definitions of key design terminology – Market demand & technology push,
Quality Aesthetics, Ergonomics, Anthropometrics, Intellectual property etc.
Factors that improve Aesthetics / Factors that improve ergonomics of a
product/system
Communicating methods. Prototyping and modelling what are they and why use
them
Explain properties of materials (eg hardness and malleability etc.)
Wood and manufactured boards – main groups, characteristics and uses
Metals –main groups, characteristics and uses
Plastics – Main groups, characteristics and uses
Smart materials – Thermo-chromic materials and SMA
Scales of production one-off, batch and mass production
Workshop processes, tools and equipment for manufacturing with (a) acrylic &
(b) MDF
Design question – Modern/Contemporary CD holder (10 CDs – more info to
follow)
Question type(s)
(e.g. diagrams,
examples, )
Question responses will include definitions, advantages/advantages, justifications and
examples. Some questions will relate to workshop tools and processes to manufacture a
simple product. Diagrams will also be necessary. Theory booklet has sample questions
Equipment
required
Ruler, pencil, pen and colouring pencils
Revision tip(s) Study a topic for five minutes – close your book and write down everything you can
remember in a few minutes. Make corrections in colour – repeat as necessary. Move on to the
next topic when you feel confident.
Pay attention to your technical vocabulary and diagrams.
Read over notes, handouts and questions to produce fact sheets on the new topics you have
covered this year
Recap on your workshop experience to revise tools, machines and safety
Revise practice exam questions in theory booklet. Study all pages 111 - 136
See past papers.(shared documents – Technology & Design – Yr12 past papers
Recommended