View
5
Download
0
Category
Preview:
Citation preview
2
1
Fastening - Pliers, ScrewdriversHa
nd To
ols
www.mydepot.com.my
LINESMAN PLIERLONG NOSE PLIER
Item No Description200001 160mm (6 in.)
200003 200mm (8 in.)
Item No Description200009 160mm (6 in.)
200011 190mm (7-1/2 in.)
200013 220mm (8-1/2 in.)
Item No Description200005 160mm (6 in.)
200007 200mm (8 in.)
Item No Description200008 190mm (7-1/2 in.)
Item No Description200015 160mm (6 in.)
DIAGONAL PLIERFLAT NOSE PLIER
HEAVY DUTY DIAGONAL PLIER WIRE STRIPPER
The cutting edges are so adjusted to cut hard and soft copper as well as steel wires with equal effort. The cutting edge is sharper after special heat treatment. With comfortable non-slip soft grips handle. Material type : CR-NI.
General purpose pliers for cutting hard and soft wires and cables. Induction hardened cutting edges. With comfortable non-slip soft grips handle. Material type : CR-NI.
Sharp high-frequency treated cutting edges. Short jaws and beveled cutting edges permit close cutting of wire. With comfortable non-slip soft grips handle. Material type : CR-NI.
The Flat Nose Plier is used for lead forming and parts handling.Heat treated flat nose pliers.With comfortable non-slip soft grips handle.Material type : CR-V.
Powerful leverage for cutting heavy wire. Tapered nose for easy working in confined areas. With comfortable non-slip soft grips handle. Material type : CR-NI.
BENT NOSE PLIER
ROUND NOSE PLIER
END NIPPER
Item No Description200017 160mm (6 in.)
200019 200mm (8 in.)
Long half round section gripping jaws for forming loops with wire or thin strips of metal. Induction hardened cutting edges and jaws. With comfortable non-slip soft grips handle. Material type : CR-V.
This wire stripper features a adjustable screw for setting the desired diameter. With comfortable non-slip soft grips handle. Material type : CR-V.
Item No Description200021 160mm (6 in.)
Item No Description200023 160mm (6 in.)
Item No Description200025 160mm (6 in.)
Round nose pliers have tapered, conical jaws for making round wire loops. Heat treated round nose pliers. With comfortable non-slip soft grips handle. Material type : CR-V.
End Nipper has a solid joint end and precision machined edges to provide easier cutting . High quality end cutting pliers. With comfortable non-slip soft grips handle. Material type : CR-V.
3
1
Fastening - Pliers, ScrewdriversHand Tools
www.mydepot.com.my
The pliers having the joint adjustable to two positions so as to obtain either a wide or a narrow opening for the jaws. Machined jaws for maximum gripping strength. With comfortable non-slip soft grips handle. Material type : CR-NI.
Ideal for accurate handling of small objects in inaccesible areas. With comfortable non-slip soft grips handle. Material type : CR-NI.
The pliers can adjust to a number of sizes without the distance in the handle growing wider. Hardened and tempered. With comfortable non-slip soft grips handle. Material type : CR-NI.
Box joint diagonal. Perfectly mated cutters, scientifically heat treated to hold their edge. With comfortable non-slip soft grips handle. Material type : CR-V.
Hardened and tempered carbon steel jaws, for accurate and delicate work. Allows you to get into tight or difficult areas. With comfortable non-slip soft grips handle. Material type : CR-NI.
Suited for versatile electric works with either specially harden blades, jaws or tips. Ground, hardened steel cutting blades for good durability. With comfortable non-slip soft grips handle. Material type : CR-NI.
Brushed finished, precision machined jaws with sturdy spring loaded action. Sharp, high frequency treated wire cutters. With comfortable non-slip soft grips handle. Material type : CR-NI.
Essential End Cutting Pliers for home, work & hobbies - one of the most-useful tools ever invented. Great for getting close cuts on objects. With comfortable non-slip soft grips handle. Material type : CR-NI.
Double leaf springs design provides greater cutting power as well as powerful gripping, bending, and seizing. With comfortable non-slip soft grips handle. Material type : CR-NI.
SLIP JOINT PLIER
GROOVE JOINT PLIER
BOX JOINT PLIER
MINI LONG NOSE PLIER
MINI DIAGONAL PLIER
MINI BENT NOSE PLIER
MINI FLAT NOSE PLIER
MINI END NIPPER
MINI LINESMAN PLIER
Item No Description200051 175mm (7 in.)
200053 200mm (8 in.)
Item No Description200081 120mm (4-3/4 in.)
Item No Description200087 120mm (4-3/4 in.)
Item No Description200061 200mm (8 in.)
200063 250mm (10 in.)
200065 300mm (12 in.)
Item No Description200083 110mm (4-1/4 in.)
Item No Description200089 100mm (4 in.)
Item No Description200071 250mm (10 in.)
Item No Description200085 120mm (4-3/4 in.)
Item No Description200091 115mm (4-1/2 in.)
4
1
Fastening - Pliers, ScrewdriversHa
nd To
ols
www.mydepot.com.my
The cutting edges are so adjusted to cut hard and soft copper as well as steel wires with equal effort. The cutting edge is sharper after special heat treatment. With soft grips handle. Material type : CR-V.
Sharp high-frequency treated cutting edges. Short jaws and beveled cutting edges permit close cutting of wire. With soft grips handle. Material type : CR-V.
Powerful leverage for cutting heavy wire. Tapered nose for easy working in confined areas. With soft grips handle. Material type : CR-V.
General purpose pliers for cutting hard and soft wires and cables. Induction hardened cutting edges. With soft grips handle. Material type : CR-V.
The Flat Nose Plier is used for lead forming and parts handling. Heat treated flat nose pliers. With soft grips handle. Material type : CR-V.
Long half round section gripping jaws for forming loops with wire or thin strips of metal. Induction hardened cutting edges and jaws. With soft grips handle. Material type : CR-V.
Round nose pliers have tapered, conical jaws for making round wire loops. Heat treated round nose pliers. With soft grips handle. Material type : CR-V.
End Nipper has a solid joint end and precision machined edges to provide easier cutting. High quality end cutting pliers. With soft grips handle. Material type : CR-V.
This wire stripper features a adjustable screw for setting the desired diameter. With soft grips handle. Material type : CR-V.
Item No Description200121 160mm (6 in.)
Item No Description200115 160mm (6 in.)
Item No Description200123 160mm (6 in.)
LONG NOSE PLIER
DIAGONAL PLIER
HEAVY DUTY DIAGONAL PLIER
LINESMAN PLIER
FLAT NOSE PLIER
BENT NOSE PLIER
ROUND NOSE PLIER
END NIPPER
WIRE STRIPPER
Item No Description200101 160mm (6 in.)
200103 200mm (8 in.)
Item No Description200109 160mm (6 in.)
200111 190mm (7-1/2 in.)
200113 220mm (8-1/2 in.)
Item No Description200105 160mm (6 in.)
200107 200mm (8 in.)
Item No Description200108 190mm (7-1/2 in.)
Item No Description200117 160mm (6 in.)
200119 200mm (8 in.)
Item No Description200125 160mm (6 in.)
5
1
Fastening - Pliers, ScrewdriversHand Tools
www.mydepot.com.my
SLIP JOINT PLIER
GROOVE JOINT PLIER
MINI LONG NOSE PLIER
MINI DIAGONAL PLIER
MINI BENT NOSE PLIER
MINI FLAT NOSE PLIER
MINI END NIPPER
MINI LINESMAN PLIER
LONG REACH PLIER
Item No Description200183 110mm (4-1/4 in.)
Item No Description200151 160mm (6 in.)
200153 200mm (8 in.)
Item No Description200161 200mm (8 in.)
200163 250mm (10 in.)
200165 300mm (12 in.)
Item No Description200189 100mm (4 in.)
Item No Description200185 120mm (4-3/4 in.)
Item No Description200191 115mm (4-1/2 in.)
Item No Description200181 120mm (4-3/4 in.)
Item No Description200187 120mm (4-3/4 in.)
Item No Description200221 280mm (11 in.)
The pliers having the joint adjustable to two positions so as to obtain either a wide or a narrow opening for the jaws . Machined jaws for maximum gripping strength. With soft grips handle. Material type : CR-V.
Brushed finished, precision machined jaws with sturdy spring loaded action. Sharp, high frequency treated wire cutters. With soft grips handle. Material type : CR-V.
Essential End Cutting Pliers for home, work & hobbies - one of the most-useful tools ever invented. Great for getting close cuts on objects. With soft grips handle. Material type : CR-V.
The pliers can adjust to a number of sizes without the distance in the handle growing wider. Hardened and tempered. With soft grips handle. Material type : CR-V.
Ideal for accurate handling of small objects in inaccesible areas. With soft grips handle. Material type : CR-V.
Hardened and tempered carbon steel jaws, for accurate and delicate work. Allows you to get into tight or difficult areas. With soft grips handle. Material type : CR-V.
Double leaf springs design provides greater cutting power as well as powerful gripping, bending, and seizing. With soft grips handle. Material type : CR-V.
Suited for versatile electric works with either specially harden blades, jaws or tips. Ground, hardened steel cutting blades for good durability. With soft grips handle. Material type : CR-V.
Long, slim jaws and flush riveted joints enable pliers to reach into recessed areas. Jaw tips are perfectly aligned and feature machined rather than stamped teeth for precise gripping with positive control. With soft grips handle. Material type : CR-V.
6
1
Fastening - Pliers, ScrewdriversHa
nd To
ols
www.mydepot.com.my
LONG REACH PLIER 45O
LONG REACH PLIER 90O
LONG REACH PLIER 20O OFFSET
CARPENTER’S PINCER
TOWER PINCER
LOCKING PLIER
LOCKING PLIER - LONG NOSE
LOCKING PLIER
LOCKING PLIERS - LONG NOSE
Item No Description200551 125mm (5 in.)
200553 175mm (7 in.)
200555 250mm (10 in.)
45° Superior long reach design for work in confined areas. Machined jaws for maximum gripping strength. With soft grips handle. Material type : CR-V.
90° Superior long reach design for work in confined areas. Machined jaws for maximum gripping strength. With soft grips handle. Material type : CR-V.
20° Offset Superior long reach design for work in confined areas. Machined jaws for maximum gripping strength. With soft grips handle. Material type : CR-V.
Specially favored by craftsman due to precision workmanship. Extreme wear resistance and good balance. With soft grips handle. Material type : CR-V.
A tower pincer plier is a hand tool used in many situations where a mechanical advantage is required to pinch, cut or pull an object. These are durable, reliable, corrosion resistant and efficient with smooth operation. With soft grips handle. Material type : CR-V.
Locking pliers with wire cutter. Can be used as pliers, adjustable wrench, wire cutter, pipe wrench or clamp. Locks on to a variety of sizes with a tremendous grip. Quick release. Supplied with soft grip handles for added comfort and control. Material type : CR-V.
Suitable for where access is limited. Jaws incorporate long section for gripping flat material and curved section for pipes and tubes. Spring-loaded locking mechanism. Supplied with soft grip handles for added comfort and control. Material type : CR-V.
Locking pliers with wire cutter. Can be used as pliers, adjustable wrench, wire cutter, pipe wrench or clamp. Locks on to a variety of sizes with a tremendous grip. Quick release. Material type : CR-V.
Suitable for where access is limited. Jaws incorporate long section for gripping flat material and curved section for pipes and tubes. Spring-loaded locking mechanism. Material type : CR-V.
Item No Description200223 280mm (11 in.)
Item No Description200303 200mm (8 in.)
Item No Description200507 165mm (6-1/2 in.)
200509 235mm (9-1/2 in.)
Item No Description200225 280mm (11 in.)
Item No Description200313 225mm (9 in.)
Item No Description200501 125mm (5 in.)
200503 175mm (7 in.)
200505 250mm (10 in.)
Item No Description200227 280mm (11 in.)
Item No Description200557 165mm (6-1/2 in.)
200559 235mm (9-1/2 in.)
7
1
Fastening - Pliers, ScrewdriversHand Tools
www.mydepot.com.my
WELDING CLAMP LOCKING PLIER
FLAT WELDING LOCKING PLIER
C TYPE WELDING LOCKING PLIERC TYPE WELDING LOCKING PLIERWITH SWIVEL PAD
INSULATED LONG NOSE PLIER
INSULATED DIAGONAL PLIERINSULATED COMBINATION PLIER
INSULATED WIRE STRIPPER
INSULATED COMBINATION PLIER
Item No Description201011 200mm (8 in.)
Item No Description200601 225mm (9 in.)
200603 266mm (10 in.)
Item No Description200631 180mm (7 in.)
200633 275mm (11 in.)
Item No Description201003 200mm (8 in.)
Item No Description200611 200mm (8 in.)
200613 250mm (10 in.)
Item No Description201025 160mm (6 in.)
Item No Description201005 160mm (6 in.)
Item No Description200621 160mm (6 in.)
200623 275mm (11 in.)
Item No Description201063 230mm (9 in.)
U-shaped jaws provide enhanced visibility and more working space. Turn screw to adjust pressure and fit work; Stays adjusted for repetitive use. Ideal for awkwardly shaped pieces. Quick,easy locking and release action.
Swivel pads for holding without damaging work surface. The jaws is special heat treatment. Excellent toughness and torque force. Punch formed by strong alloy steel. Gripping things for keeping their shape.
Multi-purpose pliers for gripping, twisting and cutting. Induction hardened cutting edges. The handle of all insulated pliers are meet all the requirements of the VDE standard. Material type : CR-V.
Locking pliers for sheet metal with fixing in the operating position. Simplifies bending, forming, and crimping of sheet metal. Excellent for upholstery work. Secure locking mechanism resists slipping.
The flat round jaws have serrated gripping surfaces. Induction hardened cutting edges. The handle of all insulated pliers are meet all the requirements of the VDE standard. Material type : CR-V.
This wire stripper features a adjustable screw for setting the desired diameter. The handle of all insulated pliers are meet all the requirements of the VDE standard. Material type : CR-V.
Used for clamping angle joint sections for general assembly work. The jaws is special heat treatment. Excellent toughness and torque force. Punch formed by strong al-loy steel. Gripping things for keeping their shape. Material type : CR-V.
Sharp high-frequency treated cutting edges. Short jaws and beveled cutting edges permit close cutting of wire. The handle of all insulated pliers are meet all the requirements of the VDE standard. Material type : CR-V.
Without chrome. Multi-purpose pliers for gripping, twisting and cutting. Induction hardened cutting edges. The handle of all insulated pliers are meet all the requirements of the VDE standard. Material type : CR-V.
8
1
Fastening - Pliers, ScrewdriversHa
nd To
ols
www.mydepot.com.my
CIRCLIP PLIER- STRAIGHT EXTERIOR
CIRCLIP PLIER- STRAIGHT INTERIOR
CIRCLIP PLIER - BENT EXTERIOR
CIRCLIP PLIER - BENT INTERIOR
2PC PLIERS & WRENCH SET
• Linesman Plier - 190mm (7-1/2 in.)• Adjustable Wrench - 250mm (10 in.)
2PC PLIERS & WRENCH SET
• Slip Joint Pliers - 200mm (8 in.)• Adjustable Wrench - 250mm (10 in.)
3PC PLIERS SET
• Long Nose Plier - 160mm (6 in.)• Diagonal Plier - 160mm (6 in.)• Linesman Plier - 190mm (7-1/2 in.)
3PC PLIERS SET
• Diagonal Plier - 160mm (6 in.)• Linesman Plier - 160mm (6 in.)• Box Joint Plier - 190mm (7-1/2 in.)
• Long Nose Plier - 160mm (6 in.)• Diagonal Plier - 160mm (6 in.)• Linesman Plier - 190mm (7-1/2 in.) • Box Joint Plier - 250mm (10 in.)
4PC PLIERS SET
Item No Description202011 175mm (7 in.)
Item No Description202017 175mm (7 in.)
Item No Description204005 3pc per set
Item No Description204007 3pc per set
Item No Description204001 2pc per set
Item No Description202013 175mm (7 in.)
Item No Description204009 4pc per set
Item No Description204003 2pc per set
Item No Description202015 175mm (7 in.)
Circlip-straight exterior. Thinner nose piece enables access to tight areas. Integrated spring reduces risk of loss during operation. With soft grips handle. Material type : CR-V.
Circlip-bent interior. Nose angle of 45 degrees enables access to awkward areas. Thinner nose piece enables access to tight areas. Integrated spring reduces risk of loss during operation. With soft grips handle. Material type : CR-V.
A set of 3pcs (Long nose, diagonal & linesman) pliers. Induction hardened and precision ground cutting edges for precision cutting and longer life. With comfortable non-slip soft grips handle.
Circlip-straight interior. Thinner nose piece enables access to tight areas. Integrated spring reduces risk of loss during operation. With soft grips handle. Material type: CR-V.
A sets of linesman pliers & adjustble wrench. Induction hardened and precision ground cutting edges for precision cutting and longer life. With comfortable non-slip soft grips handle.
A set of 3pcs (Diagonal, linesman & box joint) pliers. Induction hardened and precision ground cutting edges for precision cutting and longer life. With comfortable non-slip soft grips handle.
Circlip-bent exterior. Nose angle of 45 degrees enables access to awkward areas. Thinner nose piece enables access to tight areas. Integrated spring reduces risk of loss during operation. With soft grips handle. Material type : CR-V.
A sets of slip joint pliers & adjustble wrench. Induction hardened and precision ground cutting edges for precision cutting and longer life. With comfortable non-slip soft grips handle.
A set of 4pcs (Long nose, diagonal, linesman & box joint) pliers. Induction hardened and precision ground cutting edges for precision cutting and longer life. With comfortable non-slip soft grips handle.
9
1
Fastening - Pliers, ScrewdriversHand Tools
www.mydepot.com.my
2PC MINI PLIERS SET
• Mini Long Nose Plier - 120mm (4-3/4 in.)• Mini Diagonal Plier - 110mm (4-1/4 in.)
4PC MINI PLIERS SET
• Mini Long Nose Plier - 120mm (4-3/4 in.)• Mini Diagonal Plier - 110mm (4-1/4 in.)• Mini Bent Nose Plier - 120mm (4-3/4 in.)• Mini End Nipper - 100mm (4 in.)
Item No Description204024 2pc per set
Item No Description204036 4pc per set
A set of 2pcs (Mini long nose & diagonal)pliers. Induction hardened and precision ground cutting edges for precision cutting and longer life. With soft grips handle.
A set of 4pcs (Mini long nose, diagonal, bent nose & end nipper)pliers. Induction hardened and precision ground cutting edges for precision cutting and longer life. With soft grips handle.
For scribing metal, starting holes, and a variety of piercing and punching jobs. Heat-treated and tempered shank.Handle provides a comfortable, secure grip. Material type : CR-V.
AWL
Item No Description205233 100mm (4 in.)
6-IN-1 SCREWDRIVER6 in 1 Screwdriver. High-quality S2 steel bits. Handle provides a comfortable, secure grip.
Item No Description205201 100mm (4 in.)
205203 150mm (6 in.)
6-IN-1 SCREWDRIVER - WITH BITS
#1 & #2 6mm (1/4 in.) & 5mm (3/16 in.) 8mm (5/16 in.) & 6mm (1/4 in.)
Item No Description205211 6-in-1 per set
6 in 1 Screwdriver with bits. Handle provides a comfortable, secure grip. Material type : CR-V.
Slotted tips are precision cut and vapor-blasted for the best possible grip and helps prevent chrome plating from peeling. Chrome plating helps protect against corrosion and promotes easy clean up. Handle provides a comfortable, secure grip. With VPA/GS Approval.
SCREWDRIVER - SLOTTED
Item No Description205000 2.5 x 75mm (3/32 x 3 in.)
205001 3.0 x 75mm (1/8 x 3 in.)
205002 3.0 x 100mm (1/8 x 4 in.)
205003 4.0 x 100mm (5/32 x 4 in.)
205004 4.0 x 125mm (5/32 x 5 in.)
205007 5.0 x 38mm (3/16 x 1-1/23 in.)
205008 5.0 x 50mm (3/16 x 2 in.)
205009 5.0 x 100mm (3/16 x 4 in.)
205010 6.0 x 100mm (1/4 x 4 in.)
205011 6.0 x 125mm (1/4 x 5 in.)
205013 8.0 x 150mm (5/16 x 6 in.)
205014 6.0 x 150mm (1/4 x 6 in.)
205015 9.5 x 200mm (3/8 x 8 in.)
205016 5.5 x 125mm (7/32 x 5 in.)
205017 5.5 x 150mm (7/32 x 6 in.)
205018 6.5 x 150mm
205019 8.0 x 175mm (5/16 x 7 in.)
10
1
Fastening - Pliers, ScrewdriversHa
nd To
ols
www.mydepot.com.my
SCREWDRIVER - POZI SCREWDRIVER - TORX®SCREWDRIVER - PHILLIPS
6PC SCREWDRIVER SET 6PC SCREWDRIVER SET 6PC SCREWDRIVER SET
#0 x 60mm (2-1/2 in.),#1 x 75mm (3 in.),#2 x 100mm (4 in.)3 x 75mm (1/8 x 3 in.),5 x 100mm (3/16 x 4 in.),6 x 125mm (1/4 x 5 in.)
5 x 38mm (3/16 x 1-1/2 in.),3 x 75mm (1/8 x 3 in.),6 x 100mm (1/4 x 4 in.),6 x 125mm (1/4 x 5 in.),5 x 100mm (3/16 x 4 in.),5 x 50mm (3/16 x 2 in.)
#0 x 60mm (2-1/2 in.),#1 x 75mm (3 in.),#2 x 100mm (4 in.)T-10 x 75mm (3 in.),T-15 x 100mm (4 in.),T-25 x 100 (4 in.)
Item No Description
205031 #0 x 60mm (2-1/2 in.)
205032 #0 x 75mm (3 in.)
205033 #1 x 75mm (3 in.)
205034 #1 x 100mm (4 in.)
205035 #2 x 38mm (1-1/2 in.)
205036 #2 x 50mm(2in.)
205037 #2 x 100mm (4 in.)
205038 #2 x 125mm (5 in.)
205041 #3 x 150mm (6 in.)
Item No Description
205051 #0 x 60mm(2-1/2 in.)
205052 #0 x 75mm (3 in.)
205053 #1 x 75mm(3 in.)
205054 #1 x 100mm (4 in.)
205055 #2 x 38mm (1-1/2 in.)
205056 #2 x 50mm (2in.)
205057 #2 x 100mm (4 in.)
205058 #2 x 125mm (5 in.)
205061 #3 x 150mm (6 in.)
Item No Description205069 T-8 x 75mm
(3 in.)
205071 T-10 x 75mm (3 in.)
205073 T-15 x 100mm (4 in.)
205075 T-20 x 100mm (4 in.)
205077 T-25 x 100mm (4 in.)
205079 T-27 x 125mm (5 in.)
205081 T-30 x 125mm (5 in.)
205083 T-40 x 150mm (6 in.)
205085 T-45 x 150mm (6 in.)
Pozi tips are precision cut and vapor-blasted for the best possible grip and helps prevent chrome plating from peeling. Chrome plating helps protect against corrosion and promotes easy clean up. Handle provides a comfortable, secure grip. With VPA/GS Approval.
Phillips tips are precision cut and vapor-blasted for the best possible grip and helps prevent chrome plating from peeling. Chrome plating helps protect against corrosion and promotes easy clean up. Handle provides a comfortable, secure grip. With VPA/GS Approval.
Torx tips are precision cut and vapor-blasted for the best possible grip and helps prevent chrome plating from peeling. Chrome plating helps protect against corrosion and promotes easy clean up. Handle provides a comfortable, secure grip. With VPA/GS Approval.
Item No Description205401 6pc per set
Item No Description205402 6pc per set
Item No Description205403 6pc per set
6pc screwdriver set (Slotted). Chrome vanadium steel blades with magnetic tips. Precision machined black tips for improved dimensional accuracy. Handle provides a comfortable, secure grip.
6pc screwdriver set (Phillips & Slotted). Chrome vanadium steel blades with magnetic tips. Precision machined black tips for improved dimensional accuracy. Handle provides a comfortable, secure grip.
6pc screwdriver set (Pozi & Torx). Chrome vanadium steel blades with magnetic tips. Precision machined black tips for improved dimensional accuracy. Handle provides a comfortable, secure grip.
SCREWDRIVER - PHILLIPS
11
1
Fastening - Pliers, ScrewdriversHand Tools
www.mydepot.com.my
6PC SCREWDRIVER SET
INSULATED SCREWDRIVER - PHILLIPS
INSULATED SCREWDRIVER - POZI
6PC INSULATED SCREWDRIVER SET6PC SCREWDRIVER SET
#1 x 75mm (3 in.),#2 x 100mm (4 in.),#3 x 150mm (6 in.)#1 x 75mm (3 in.),#2 x 100mm (4 in.),#3 x 150mm (6 in.)
T-10 x 75mm (3 in.),T-15 x 100mm (4 in.),T-20 x 100mm (4 in.),T-25 x 100mm (4 in.),T-27 x 125mm (5 in.),T-30 x 125mm (5 in.)
3 x 75mm,4 x 100mm,5.5 x 125mm#0 x 60mm,#1 x 80mm, #2 x 100mm
10PC SCREWDRIVER SET5 x 38mm (3/16 x 1-1/2 in.),3 x 75mm (1/8 x 3 in.), 5 x 100mm (3/16 x 4 in.),6 x 125mm (1/4 x 5 in.)#2 x 38mm (1-1/2 in.),#0 x 60mm (2-1/2 in.), #1 x 75mm (3 in.),#2 x 100mm (4 in.)T-10 x 75mm (3 in.),T-15 x 100mm (4 in.)
INSULATED SCREWDRIVER - SLOTTED
Item No Description205601 6pc per set
20PC SCREWDRIVER SET
CR-V
5 x 75mm (3/16 x 3 in.), 5 x 100mm (3/16 x 4 in.), 5 x 150mm (3/16 x 6 in.), 6 x 100mm (1/4 x 4 in.), 6 x 150mm (1/4 x 6 in.), 6 x 150mm (1/4 x 6 in.), 6 x 38mm (1/4 x 1-1/2 in.); #1 x 100mm (4 in.), #1 x 150mm (6 in.), #2 x 100mm (4 in.), #2 x 150mm (6 in.), #2 x 38mm (1-1/2 in.); • 2pc offset screwdriver • 6pc precision screwdriver
Item No Description205404 6pc per set
Item No Description205407 10pc per set
6pc screwdriver set (Phillips & Pozi). Chrome vanadium steel blades with magnetic tips. Precision machined black tips for improved dimensional accuracy. Handle provides a comfortable, secure grip.
6pc screwdriver set (Torx). Chrome vanadium steel blades with magnetic tips. Precision machined black tips for improved dimensional accuracy. Handle provides a comfortable, secure grip.
6pc screwdriver set (Phillips & Slotted). Chrome vanadium steel blades with magnetic tips. Precision machined black tips for improved dimensional accuracy. The handle of all insulated pliers are meet all the requirements of the VDE standard. Material type : CR-V.
Item No Description205405 6pc per set
Item No Description205440 20pc per set
Item No Description205501 3 x 75mm
205503 4 x 100mm
205505 5.5 x 125mm
205507 6.5 x 150mm
205509 8.0 x 175mm
Phillips tips are precision cut and vapor-blasted for the best possible grip and helps prevent chrome plating from peeling. Chrome plating helps protect against corrosion and promotes easy clean up. The handle of all insulated pliers are meet all the requirements of the VDE standard. Material type : CR-V.
Pozi tips are precision cut and vapor-blasted for the best possible grip and helps prevent chrome plating from peeling. Chrome plating helps protect against corrosion and promotes easy clean up. The handle of all insulated pliers are meet all the requirements of the VDE standard. Material type : CR-V.
Item No Description205511 #0 x 60mm
205513 #1 x 80mm
205515 #2 x 100mm
Item No Description205521 #0 x 60mm
205523 #1 x 80mm
205525 #2 x 100mm
Slotted tips are precision cut and vapor-blasted for the best possible grip and helps prevent chrome plating from peeling. Chrome plating helps protect against corrosion and promotes easy clean up. The handle of all insulated pliers are meet all the requirements of the VDE standard.
7PC SPIN FORCE DRILL SET
• Min length 275mm (11-3/4 in.), • Max length 370mm (14-1/2 in.)
Spin force drill set. Suitable for DIY drill work. A keyless chuck for easy bit changing. With comfortable non-slip soft grips handle.
Item No Description
2090012 pc drill - 1/16, 3/32 in.4 pc 75mm (3 in.) bit -
PH #1, #2; Slot 3/16; 1/4 in.
2090022 pc drill - 1.5, 2mm
4 pc 75mm (3 in.) bit - PH #1, #2; Slot 5, 6 mm
12
1
Fastening - Pliers, ScrewdriversHa
nd To
ols
www.mydepot.com.my
9PC TORX® KEY SET
8PC HEX KEY SET8PC BALL END HEX KEY SET
4PC PUNCH SCREWDRIVER BIT SET
19 PC SPIN FORCE DRILL & BIT SET - SAE & METRIC
• Min length 275mm (11-3/4 in.), • Max length 370mm (14-1/2 in.)
• Slot 10mm (3/8 in.), 8mm (5/16 in.)• PH #2, #3
ADJUSTABLE WRENCH
25˚
Both ends have hollow point for torx screws fitted with security dimple. Chrome vanadium construction. Precise formed for limited place. Convenient for insert screw cap. With VPA/GS Approval. Material type : CR-V.
This hand impact screwdriver is used in the automobile and motorcycle maintenance, which is able to convert the momentum of hammer to the twisting force of screwdriver, pulling out the hard-to-remove screw. Different sized screws are fitted to the tip of the impact screwdriver.
Item No Description
206009 T-10, 15, 20, 25, 27, 30, 40, 45, 50
Set combines all the popular hex wrench sizes into one convenient fold-up tool, eliminating the need for a mess of loose tools. The high quality hex keys are supplied in a convenient folding comfort grip holder. Material type : CR-V.
Item No Description206201 2, 2.5, 3, 4, 5, 6, 7 & 8mm
206203 5/64, 3/32, 1/8, 5/32, 3/16, 1/4, 9/32 & 5/16 in.
A set with ball point 25° offset angle combines all the popular hex wrench sizes into one convenient fold-up tool, eliminating the need for a mess of loose tools. The high quality hex keys are supplied in a convenient folding comfort grip holder. Material type : CR-V.
Item No Description206005 2, 2.5, 3, 4, 5, 6, 7 & 8mm
206007 5/64, 3/32, 1/8, 5/32, 3/16, 1/4, 9/32 & 5/16 in.
Item No Description207201 4pc per set
ADJUSTABLE WRENCHMade of chrome - vanadium alloy steel, with graduated scale. The jaws are tempered and hardened. With comfortable non-slip soft grips handle. Material type : CR-V.
Made of chrome - vanadium alloy steel, with graduated scale. The jaws are tempered and hardened. Material type : CR-V. Spin force drill & bit set. Suitable for DIY drill
work. A keyless chuck for easy bit changing. With comfortable non-slip soft grips handle.
Item No Description210001 150mm (6 in.)
210003 200mm (8 in.)
210005 250mm (10 in.)
210007 300mm (12 in.)
210009 375mm (15 in.)
Item No Description210011 150mm (6 in.)
210013 200mm (8 in.)
210015 250mm (10 in.)
210017 300mm (12 in.)
210019 375mm (15 in.)
Item No Description
209021
6 pc drill - 1/16, 5/64, 3/32, 7/64, 1/8 & 9/64 in.11pc 2 in. bit - Slot 1/8 x 2,3/16 x 2 & 1/4 x 2.PH #0 x 2, #1 x 2, #2; drill hole starter
2090226 pc drill - 1.5, 2, 2.5, 3, 3.2, 3.5mm;11pc 50mm bit - Slot 3mm x 2, 5mm x 2, 6mm x 2, PH#0 x 2, #1 x 2, #2; drill hole starter
9PC BALL END HEX KEY SET
25˚
With ball point 25° offset angle. Chrome vanadium construction. Precise formed for limited place. Convenient for insert screw cap. With VPA/GS Approval. Material type : CR-V.
Item No Description
206005 1.5, 2, 2.5, 3, 4, 5, 6, 8 & 10mm
206007 1/16, 5/64, 3/32, 1/8, 5/32, 3/16, 1/4, 5/16 & 3/8 in.
8PC TORX® KEY SETTorx key set. Chrome vanadium construction. Precise formed for limited place. Convenient for insert screw cap. With VPA/GS Approval. Material type : CR-V.
Item No Description
206209 T-9, 10, 15, 20, 25, 27, 30 & 40
13
1
Fastening - Pliers, ScrewdriversHand Tools
www.mydepot.com.my
C - CLAMPF - CLAMP - ALL STEEL CONSTRUCTION
F - CLAMP
TRIGGER CLAMP DUAL ACTION
NYLON CLAMP
NYLON CLAMP - WIDE MOUTHPIPE CLAMPCORNER CLAMP
Very convenient for parts clamping in the fields of woodworking, plastics & aluminum industries. Soft-Grip handle is larger and more ergonomic, allowing high clamping pressure with less effort. All steel construction.
Slim section permits use in situations where space is limited. Durable Malleable steel frames. The spindle has acme threads for a smooth operation and maximum clamping pressure.
Designed for comfortable hand span Incorporated into the handles are grooves to prevent slipping for the quickest clamping possible. Heavy duty tempered steel spring, and soft pivoting plastic jaw pads.
Dual action clamps single handed versatile clamp for spreading and clamping. Fibre and nylon bodies with swivelling jaws to hold a variety of shapes. Quick release trigger for fast adjustment.
Item No Description215213 200 x 80mm
215217 300 x 80mm
215227 300 x 120mm
215229 400 x 120mm
215233 600 x 120mm
215237 1000x 120mm
Item No Description215001 50mm (2 in.)
215003 75mm (3 in.)
215005 100mm (4 in.)
215007 125mm (5 in.)
215009 150mm (6 in.)
215011 200mm (8 in.)
Item No Description215721 150mm (6 in.)
215723 100mm (4 in.)
215725 150mm (6 in.) dual head
Item No Description215601 150mm (6 in.)
215603 300mm (12 in.)
215604 450mm (18 in.)
215605 600mm (24 in.)
215607 900mm (36 in.)
215609 1200mm (48 in.)
Item No Description215403 150 x 50mm
215405 200 x 50mm
215409 300 x 50mm
215413 200 x 80mm
215417 300 x 80mm
215427 300 x 120mm
215429 400 x 120mm
215433 600 x 120mm
215437 1000 x 120mm
F - CLAMP QUICK ACTION
Item No Description215453 300mm (12 in.)
215455 450mm (18 in.)
215457 600mm (24 in.)
215459 900mm (36 in.)
Item No Description215701 2pc 80mm (3-1/4 in.)
215703 110mm (4-1/4 in.)
215705 165mm (6-1/2 in.)
215707 225mm (9 in.)
Quick action. Very convenient for parts clamping in the fields of woodworking, plastics & aluminum industries. Soft-Grip handle is larger and more ergonomic, allowing high clamping pressure with less effort. Sturdy and Durable, Easy sliding. Quick action.
Wide mouth. Designed for comfortable hand span Incorporated into the handles are grooves to prevent slipping for the quickest clamping possible. Heavy duty tempered steel spring, and soft pivoting plastic jaw pads.
Item No Description215851 75mm (3 in.)
Corner Clamp is ideal for making frames, repairing window screens and storm doors and for splicing moulding and trim. For use on 3 in. boards.
Item No Description215803 1/2 in.
215805 3/4 in.
14
1
Fastening - Pliers, ScrewdriversHa
nd To
ols
www.mydepot.com.my
RIVET GUN
• 2.4mm, 3.2mm, 4.0mm, 4.8mm
HEAVY DUTY RIVET GUN- FLEX HEAD
EYELET PLIERS
PUNCH PLIERS STAPLE GUN HEAVY DUTY STAPLE GUN
• 2.4mm, 3.2mm, 4.0mm, 4.8mm
• With 100pc staples 4-8mm• 2.5mm, 3mm, 3.5mm, 4.0mm, 4.5mm, 5.0mm
• With 600pc staples 4-14mm
Item No Description217001 250mm (10 in.)
Item No Description217022 -
Powerful lever action arms with comfortable moulded grips and spring-loaded handle. Durable all-steel construction. Comes with four nosepieces .
The punch plier is with 6 punches of different size. Designed to punch and secure eyelets into a multitude of materials including sheeting, tarpaulins and cloth. Non slip comfortable vinyl coating grips.
Heavy duty flex head. Powerful lever action arms with comfortable moulded grips and spring-loaded handle. Durable all-steel construction. Comes with four nosepieces.
This staple gun is ideal for home or professional use. The grip handle resists slipping for comfortable, easy operation. It features a jam-resistant mechanism for reliable performance.
Designed to punch and secure eyelets into a multitude of materials including sheeting, tarpaulins and cloth. Non slip comfortable vinyl coating grips.
This staple gun is ideal for home or professional use. The grip handle resists slipping for comfortable, easy operation. It features a jam-resistant mechanism for reliable performance. Heavy duty type.
Item No Description217201 -
Item No Description218003 -
Item No Description217401 -
Item No Description218011 3-in-1 per set
Recommended