View
4
Download
0
Category
Preview:
Citation preview
• 64 TB, 32 TB and 16 TB QLC flash SSD• SATA-3 or SAS-2 6.0 Gbps interface• 3.5” industry standard form factor• 0.2 to 0.6 DWPD for 5 years (depending on workload)• 7W/15W power consumption (idle/active)• Enables up to 1.44 PB raw flash per rack U• Up to 500/460 MBps reads/writes
• World’s highest capacity QLC flash SSD• World’s only enterprise SAS QLC flash SSD• Superior reliability over mechanical HDDs• 95% lower data access latency than HDDs• Up to 7.5 higher density than NVMe SSDs• 76% lower power usage per TB than NVMe SSDs• Plug-and-play with existing 3.5” HDD slots
Highlights
Advantages
ExaDrive NL
Datasheet
With industry-leading capacity up to 64 TB in a single SSD, ExaDrive NL helps organizations eliminate server sprawl, reduce software licensing costs, improve efficiency, and reduce data center operating costs by up to 75%. Available in a 3.5 inch form factor just like enterprise hard drives, ExaDrive NL is plug-and-play compatible with virtually any 3.5 inch HDD slot. While other QLC flash SSDs cannot match the capacity of the latest hard drives, ExaDrive NL is available in 16 TB, 32 TB, and 64 TB sizes, easily eclipsing all HDDs and QLC flash SSDs on the market. This makes transitioning to flash more affordable than ever before, enabling organizations to increase capacity and reduce OpEx while preserving their existing servers, racks, power, and cooling equipment.
ExaDrive NL supports both SATA and dual-port SAS for compatibility with high-density enterprise servers, JBODs, and dual-controller storage arrays that require high availability for mission-critical applications. Unlike NVMe SSDs, ExaDrive NL simplifies tiered and hybrid storage by allowing users to mix hard drives and SSDs in the same enclosure effortlessly. At less than one pound, ExaDrive NL offers the capacity of a full data storage array in a device small enough to fit in your back pocket, making it well-suited to autonomous vehicles, aircraft, mobile systems, 5G infrastructure, e-discovery, and cloud data transport appliances. ExaDrive NL is qualified with servers from major vendors, including Dell EMC, HPE, Lenovo, Cisco, and Supermicro.
The #1 Enterprise QLC Flash SSD
NIMBUSDATA
• Unstructured data• Object storage• Digital imaging and media• Technical computing• Data mobility for edge storage
Applications & Workloads
®
DatasheetNIMBUSDATA
ExaDrive NL offers a unique balance of capacity, performance, energy efficiency, and value. ExaDrive SSDs offer more capacity, better performance, lower power consumption, and better reliability than nearline HDDs. While NVMe SSDs are faster, they use substantially more power, offer less capacity, and have higher OpEx costs. ExaDrive strikes the ideal balance between nearline HDDs and NVMe SSDs, offering an ideal solution for unstructured data.
Why ExaDrive NL?
With their high capacity, low OpEx, and balanced performance, ExaDrive SSDs are ideally suited to unstructured data and content workloads, where slow HDDs are no longer adequate and NVMe SSDs are too small and costly.
Where to Use ExaDrive NL?
Datasheet
EDNLS064
Active Read Power
Active Write Power
Idle Power
Active Read Power / TB
Active Write Power / TB
Idle Power / TB
Capacity
Interface
Form Factor 3.5” (LFF)
Latency
Random Read (4 KB)
Random Write (4 KB)
Sequential Read
Sequential Write
14.9 W
15.4 W
10.9 W
0.23 W
0.24 W
0.17 W
64 TB
0.2 ms
52K IOps
26K IOps
450 MBps
260 MBps
Temperature (operating)
Size (L x W x H)
Weight
0 - 60 degrees C
147.0 mm x 101.8 mm x 26.1 mm
Endurance
MTBF (hours)
Limited Warranty
0.2 to 0.6 DWPD for 5 years, depending on the IO block size of the workload
2.5 million hours
5 years
ExaDrive NL series Specifications
SATA-3 (6.0 Gbps) SAS-2 dual-port (for HA)
Additional Details
Power
Performance
Reliability
Basics
EDNLS032
13.2 W
13.8 W
9.8 W
0.41 W
0.43 W
0.31 W
32 TB
0.2 ms
50K IOps
25K IOps
450 MBps
260 MBps
EDNLS016
10.1 W
11.1 W
7.2 W
0.63 W
0.69 W
0.45 W
16 TB
0.2 ms
50K IOps
25K IOps
450 MBps
260 MBps
EDNLT064EDNLT032EDNLT016
351 grams
14.9 W
15.4 W
10.7 W
0.23 W
0.24 W
0.17 W
0.1 ms
114K IOps
105K IOps
500 MBps
460 MBps
64 TB
13.2 W
13.8 W
9.6 W
0.41 W
0.43 W
0.30 W
0.1 ms
97K IOps
91K IOps
500 MBps
460 MBps
32 TB
10.1 W
11.1 W
7.0 W
0.63 W
0.69 W
0.44 W
0.1 ms
97K IOps
91K IOps
500 MBps
460 MBps
16 TB
375 grams 405 grams 356 grams 380 grams 410 grams
Datasheet
Ordering Information
ExaDrive NL vs. NVMe in the data center
Copyright © 2020 Nimbus Data, Inc. All rights reserved. Nimbus Data, Inc. will not be held liable for errors or omissions contained herein. Information in this document is subject to change without notice.All brand or product names mentioned are trademarks or registered trademarks owned by their respective organizations. Figures based on the highest capacity drive o�ered in the product family.
Nimbus Data, Inc.5151 California Ave, Ste 100Irvine, CA 92617
www.nimbusdata.com(877) 6-NIMBUS NIMBUSDATA
Part #
EDNLT016 | EDNLS016
EDNLT032 | EDNLS032
EDNLT064 | EDNLS064
Description
ExaDrive NL 3.5” 16 TB SSD (SATA-3 or SAS-2 interface)
ExaDrive NL 3.5” 32 TB SSD (SATA-3 or SAS-2 interface)
ExaDrive NL 3.5” 64 TB SSD (SATA-3 or SAS-2 interface)
ExaDrive NL vs. Nearline HDDs in the data center
Max Density Enclosure
Max SSD Capacity
Max Rack Capacity
Capacity per Rack U
Power per TB
TCO per TB
4U 90-slot 3.5”
64 TB
63.4 PB
1.44 PB
0.23 W
$
w/ExaDrive NL
2U 24-slot 2.5”
16 TB
8.4 PB
0.2 PB
1.30 W
$$$
w/NVMe SSD
2x more drives per enclosure
4x more TB per drive
7.5x more TB per rack
7.5x higher density
76% lower power/TB
80% lower TCO/TB
ExaDrive Advantages
Capacity per Rack U
Power per TB
Random Access Time
Random IO / TB
Workload Rating
Weight per TB
1.44 PB
0.23 W
< 0.1 ms
1,563 IOps
0.2 - 0.6 DWPD
6.3 grams
w/ExaDrive NL
0.4 PB
0.71 W
15 ms
11 IOps
0.08 DWPD
38.3 grams
w/18 TB HDD
3.6x higher
67% lower
150x faster
142x more IOps
~ 4x more reliable
84% lighter / TB
ExaDrive Advantages
Recommended