EnterpriseOne Xe Manufacturing and Distribution Planning … · 2006-04-25 · Manufacturing and...

Preview:

Citation preview

EnterpriseOne XeManufacturing and Distribution Planning PeopleBook

September 2000

J.D. Edwards World Source Company

7601 Technology Way

Denver, CO 80237

Portions of this document were reproduced from material prepared by J.D. Edwards.

Copyright J.D. Edwards World Source Company, 2000

All Rights Reserved

SKU XeEAMP

J.D. Edwards is a registered trademark of J.D. Edwards & Company. The names of all other products and services of J.D. Edwards used herein are trademarks or registered trademarks of J.D. Edwards World Source Company.

All other product names used are trademarks or registered trademarks of their respective owners.

The information in this guide is confidential and a proprietary trade secret of J.D. Edwards World Source Company. It may not be copied, distributed, or disclosed without prior written permission. This guide is subject to change without notice and does not represent a commitment on the part of J.D. Edwards & Company and/or its subsidiaries. The software described in this guide is furnished under a license agreement and may be used or copied only in accordance with the terms of the agreement. J.D. Edwards World Source Company uses automatic software disabling routines to monitor the license agreement. For more details about these routines, please refer to the technical product documentation.

OneWorld Xe (09/00)

Table of Contents

Overviews 1–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -���#������"�� $' ������������������������������������������������������������������������������������������

-���#�����"�����#�����������#�+����#��"��2 ���"�� $' ������������-����#��(�#"��3����������#"#"���(����#��� $'$4������������������������������������������

2 ���"�����#�������"�� $'$!��������������������������������������������������������������������������

)���������������"#��2 ���"�� $'$!������������������������������������������������������������5�#�"� �2 ���"�������#"�� $'$���������������������������������������������������������������������#���-�#���#"�� $'$���������������������������������������������������������������������������������������������������# $'�$��������������������������������������������������������������������������������2 ���"�������2����#"������"�����# $'�$������������������������������������������������2 ���"�������#� �6�"����� �#"�� $'� ����������������������������������������������������������. ��+��5���+��#�"��������"#".�#"���2 ���"�� $'�4����������������������������5��������"�� $'�!����������������������������������������������������������������������������������������

)���������������"#��2 ���"���78 9 $'�!������������������������������������������5�#�"� �2 ���"���78 :9 $'����������������������������������������������������������������������

Prerequisites

Prerequisites 2–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ;���#���"���-����#��������� ������5��������# �' ����������������������������

;���#���"����� ������5��������# �':����������������������������������������������;���#���"���1����#"�� �'4����������������������������������������������������������������������������

1��#����+�#���1����#"�����#�� �'!��������������������������������������������������������1����#"���<��� �����5�#��� �'�������������������������������������������������������������

6�#�1"# �'�������������������������������������������������������������������������������������������������1����#"���5�#��� �'%��������������������������������������������������������������������������

�������2�##�� �'$����������������������������������������������������������������������������������������"=����"�� ��������2�##�� �'$ ������������������������������������������������������������

1����#�(������ �'$ ������������������������������������������������������������������������������������1����#����"���#"�� �'$:��������������������������������������������������������������������������1����#"���2��� �'$:������������������������������������������������������������������������������������� ��#"���#���1����# �'$&��������������������������������������������������������������������������

5����(.� �#�����"�#"�� �'$&������������������������������������������������������������������5�#����$��2����#�����<�#�>�� �'$!��������������������������������������������5�#����:��5��"���(����� �'$!��������������������������������������������������������

2����#��+�(������ �'$���������������������������������������������������������������������������5�#����$��2����#�����<�#�>�� �'$%��������������������������������������������5�#����:��5��"���(���������?�: �'$%��������������������������������������������

��. ��;���.��1����#"�� �'����������������������������������������������������������������������

Manufacturing and Distribution Planning

OneWorld Xe (09/00)

;���#���"���2�� � �2���"�� �'�$����������������������������������������������������������������

Capacity Planning

Capacity Planning 3–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . )��"��"�����*����#� '4��������������������������������������������������������������������������������

��#��"�"���(��" �. �������"#� '$$��������������������������������������������������������������������

8����#"���)������;�"#�(�#���#"�� � '$$����������������������������������������������)������;�"#��� �� �#"�� '$�����������������������������������������������������������������

2���"�����#"���+��)�+���)������;�"# '$�������������������������������������)��""���)������;�"#�5���� � '$:����������������������������������������������������������

2���"�����#"���+����*����#��)������;�"# '$!��������������������8����#"���)������2�+" � '$%������������������������������������������������������������������������

8����#"���)������2�+" ��(�#���#"�� � '$%������������������������������������������2���"�����#"���+��)������2�+" ��)������#"�� '�$����������������

��+"�"���)������2�+" ��5���� � '�$������������������������������������������������������8����#"���)������)�@�"����#�2 �� '�4����������������������������������������������������

2���"�����#"���+��)������)�@�"����#�2 ���"���7) ��9 '�!��������������������������������������������������������������������������������������

)��"��"���)������)�@�"����#�2 �� ' $����������������������������������������������������

)��"��"����"��#���8����+��))2 ' $������������������������������������������������������2���"�����#"���+�������"#��5����������� ' :��������������������

)��"��"�����*����#��<����+��))2 ' :����������������������������������������������������2���"�����#"���+�������"#��<��� ' &��������������������������������������������

)��"��"���2�"��������"� ' &������������������������������������������������������������������2���"�����#"���+��2�"��������� ' �����������������������������������������

)��"��"���5�������#�" ' �����������������������������������������������������������������������2���"�����#"���+�������"#��2 ���"���5�����)��""�� ':�����

A� "��#"���)������)�@�"����#�2 �� ':�����������������������������������������������A� "��#"���5�#�������� � ':$��������������������������������������������������������������������������

8����#"���)�������#������"#��2 �� ':���������������������������������������������������2���"�����#"���+���)20)��2�2 ���"���)������#"���7) ��9 '::��)��"��"�����*����#��<����+��)��2 ':4������������������������������������������������)��"��"���2�"��������"��+��)��2 ':&������������������������������������������������)��"��"�����*������� ��+��2����#"����#�#� ':���������������������������������

2���"�����#"���+������#"����"��#���-�@�"� ':%����������������������)��"��"���)�#�������� ��������*����#��<��� ':%������������������������������

2���"�����#"���+����*����#�������� ��)��"�� '4�����������������A� "��#"���5�#�"� �)�@�"����#�2 �� '4 ��������������������������������������������������������

8����#"��������"#��)�@�"����#�2 �� '4:����������������������������������������������)��"��"��������"#��)�@�"����#�2 �� '44����������������������������������������������

)��"��"����"��#���8����+���)2 '4&����������������������������������������������)��"��"�����*����#��<����+���)2 '4&��������������������������������������������)��"��"���2�"��������"��+���)2 '4!��������������������������������������������)��"��"���5)2���*������� �����#����"��#���<"# '4!������������������)��"��"���5)2�)�#�������� ��������*�����<��� '4�����������������A� "��#"���#��������"#��)�@�"����#�2 �� '4%������������������������������������

Table of Contents

OneWorld Xe (09/00)

Master Production Scheduling

Master Production Scheduling 4–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ;���#���"����"���1���������#����"�����"� :'4��������������������������������������

���#�(���"���1�����)� �B :'&���������������������������������������������������������������#�(��#����"�����"���� �� �#"��B :'!������������������������������������������

�=��� �3����"���(��" �. ���� �� �#"�� :'��������������������������������������=��� �3�(��" �. ��#��2��"���� �� �#"�� :'��������������������������������=��� �3����� �#"���(��" �. ��#��2��"���� �� �#"�� :'%����������

8����#"����"�� �C<��� �5�#�������� � :'$$��������������������������������������������������

8����#"�����5�#�������� ��+��( �-#�� :'$$������������������������������������������2���"�����#"���+���)2052�05)2�7) :��9 :'$ ����������������������������������)��"��"���-#���+��D�#������� :'� ������������������������������������������������������������

2���"�����#"���+��D�#��������)��"�� :'�&����������������������������������8����#"�����5�#�������� ��+���� ��#���-#�� :'�&��������������������������������

)��"��"���#����"�����"� :'�!����������������������������������������������������������������������������

�)2�E���#"#������ :'����������������������������������������������������������������������������52��E���#"#������ :'�%��������������������������������������������������������������������������

2���"�����#"���+���)2052���"�����"��72 :$ 9 :' ���������������������������*"����"#���)2052����#��# :' 4��������������������������������������������������������������������

��*"����"#��5���� :' &����������������������������������������������������������������������������)��"��"�����#�" �5���� :' !��������������������������������������������������������������

2���"�����#"���+���)2052����#�" �5�����)��""�� :' ���������������2���"�����*�����5���� :':�����������������������������������������������������2���"���2����������5���� :': ����������������������������������������������2���"���5�����+����2 ���"���1��" � :':!������������������������������������2���"���5�����(�#���#"�� � :':�������������������������������������������������2 ��"���5��������F� � :':������������������������������������������������������������������ ��"���5���� :':%������������������������������������������������������������������������������

(��"�����1��G�������#����2��������� :':%������������������������������������������(��"�����1��G�������#������*���� :'4$������������������������������������������������

;���#���"���1����#�������#"�� :'4 ����������������������������������������������������������

2�#������"���6��*�# :'4:����������������������������������������������������������������������2 ���"���F�"G����"���2�"�� :'4:������������������������������������������������������1����#�������#"����� �� �#"�� :'44��������������������������������������������������

2���"������ :'4!������������������������������������������������������������������������������������������

2���"�����#"���+����*�����8����#"�� :'4!������������������������������*"����"#��5� #" ��� �5�#�������� � :'&$��������������������������������������������������

���#�(��2 ���"���6" B :'&$���������������������������������������������������������������������������=��� �3��=� ��"���2 ��������� :'&�����������������������������������������������

��##"���;��1��#���2 ������2����#��� :'&:����������������������������������������������8����#"���5� #" ��� �5�#�������� � :'&4������������������������������������������������

52�0�)205)2�2�� � �2���"�� :'&&��������������������������������������������������

Material Requirements Planning

Material Requirements Planning 5–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F������>���;��6" ��+�5�#�"� �"��5)2B 4'����������������������������������������������#�(��#����"++������.�#�����5)2�����52�B 4' ������������������������������

Manufacturing and Distribution Planning

OneWorld Xe (09/00)

F������>���)���5)2��++��#"�� �B 4'4��������������������������������������������������������8����#"���5�#�"� �)�@�"����#�2 �� 4'!������������������������������������������������������

��*"����"#��5�#�"� �)�@�"����#�2 �� 4'$$��������������������������������������������������

)��"��"���5)2��"�����"� 4'$$��������������������������������������������������������������������)��"��"���2 ���"���1��" "��+��5)2 4'$�������������������������������������������������������*"����"#��5�����+��5)2 4'$ ������������������������������������������������������������

)��"��"���5)2���#�" �5���� 4'$:������������������������������������������������������2���"�����*�����5�����+��5)2 4'$&������������������������������������2���"���2����������5�����+��5)2 4'$&������������������������������

��*"����"#�������� "���-�+���#"�� 4'$&��������������������������������������������������)��"��"���5)2�2���"��������� 4'$!����������������������������������������������������2���"�����#"���+��2���"���-�@�"� 4'$�������������������������������������������)��"��"���5)2����� ������������ 4'$�����������������������������������������������2���"�����#"���+������ �0�������-�@�"��72:��$9 4'$%������������)��"��"��������1 �����*.�����+��5)2 4'������������������������������������2���"�����#"���+��5���+��#�"��������� "�����*.���� 4' ���)��"��"���<���#"���+��5)2 4' $������������������������������������������������������������

2���"�����#"���+��6" ��+�5�#�"� �-�@�"� 4' $������������������������������������A� "��#"���5�#�"� �)�@�"����#�2 �� 4' %��������������������������������������������������������

2���"�������+��5)2 4':$����������������������������������������������������������������������������

Manufacturing and Distribution Environments

Manufacturing and Distribution Environments 6–1. . . . . . . . . . . . . . . . . . ��*"����"#��6�#���2 ���"�� &' ������������������������������������������������������������������������

)��"��"���6�#���6" ��+�5�#�"� &':����������������������������������������������������������2���"�����#"���+��6" ��+�5�#�"� �)��""�� &'&��������������������������

8����#"���52��+��6�#���6" &'���������������������������������������������������������������)��"��"���6�#�����#��#�+���52� &'$���������������������������������������������������������

��*"����"#��2����2 ���"�� &'$ ��������������������������������������������������������������������

8����#"���52��+��#���2����-���#� &'$4����������������������������������������������)��"��"���2������#��#�+���52��8����#"�� &'$4��������������������������������

��*"����"#��)���#"#"���2 ���"�� &'$%����������������������������������������������������������������

8����#"���52��+��)���#"#"���-#�� &'��������������������������������������������������������)��"��"���)���#"#"�����#��#�+���52� &'�$������������������������������������������������)��"��"���)�#�������� ��<��� &'�:��������������������������������������������������������������

Material and Capacity Planning Setup

Material and Capacity Planning Setup 7–1. . . . . . . . . . . . . . . . . . . . . . . . ;���#���"���;���+��5���+��#�"��������"#".�#"���2 ���"�� !' ��������

�����"#��)�@�"����#��"� ���7 0�)9 !':������������������������������������������������)�������#������"#���"� ���7 0)�9 !':����������������������������������������������������)������)�@�"����#�7 0))9 !':������������������������������������������������������������;�"#������7 0;�9 !':����������������������������������������������������������������������������������5����������+���)2��52���5)2������)��2�7 :05�9 !':�����������������������"���1�����)� ��+���)2��5)2������52��7 :0�19 !'4������������������������������

Table of Contents

OneWorld Xe (09/00)

��##"���;��#���2 ���"�����#�� !'!������������������������������������������������������������������

��##"���;������ �������������-�� �"���)� � !'!����������������������������������2���"�����#"���+������ �0�������-�� �"���)� � !'$�������������

��##"���;��1����#�������#"���2�"�� !'$�����������������������������������������������##"���;������2� "���)� � !'$�������������������������������������������������������������������##"���;���#��*"������� !'$:������������������������������������������������������������������������+"�"���#����#��*"��������+��2���� !'$&��������������������������������������������+"�"�����C2����#�����6�C2����# !'$���������������������������������������������������+"�"�������2� "�� !'��������������������������������������������������������������������������������A�"+�"���)���#"#"���)��#"�� !'�����������������������������������������������������������������������#"���<"�������-#���)� �#"���"� !'�:����������������������������������������������������A�"+�"���)�#�������� � !'�&��������������������������������������������������������������������������

Multifacility Planning

Multifacility Planning 8–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ��##"���;��5� #"+��" "#��2 ���"�� �'4������������������������������������������������������������������

��##"���;������ �������������)� �#"���"� �'4������������������������������������2���"�����#"���+��6�����)� �#"���"��)��""�� �'$�����������������

)��"��"���6�����)� �#"���"� �'$�������������������������������������������������������������8����#"���5� #"+��" "#��2 �� �'$ ������������������������������������������������������������������������

2���"�����#"���+��5� #"+��" "#���)2052�05)2�7) :� 9 �'$:����������������*"����"#��5� #"+��" "#��2 ���"�����#��# �'�!������������������������������������������������

)��"��"���#����"�����"��+��#���5� #"+��" "#�������� � �'�!��������������������2���"������+������5�����+��#���5� #"+��" "#�������� � �'����5� #"+��" "#��1����#�������#"�� �' ���������������������������������������������������������

�"�����"��E���#"#������ �' ����������������������������������������������������������������� �� �#"�� �' $����������������������������������������������������������������������������������������

Supplier Scheduling

Supplier Scheduling 9–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ��+"�"������� "�����#��# %'4��������������������������������������������������������������������������

��+"�"������� "�����#��#�-�+���#"�� %'4������������������������������������������������2���"�����#"���+��A����������� ��5�#��)��""�� %'%����������

��+"�"�����"����#�2�##�� %'%����������������������������������������������������������������������+"�"������� "���� "#�2����#��� %'$ ������������������������������������������������������

8����#"������� "�������� � %'$!����������������������������������������������������������������������

2���"�����#"���+��8����#"������� "�������� ��)���#�7) ::�9 %'$�������������������������������������������������������������������������������������������

)��""������� "�������� � %'�$��������������������������������������������������������������������������

2���"�����#"���+������ "�������� ��)��""�� %'�:��������������������)� ��"������� "�������� � %'�!������������������������������������������������������������������������

2���"�����#"���+������ "�������� ��)� ����8����#"���7) ::$�9 %'����������������������������������������������������������������������������������

2"�#"������� "�������� � %' $��������������������������������������������������������������������������

2���"�����#"���+������ "�������� ��2"�# %' $����������������������������

Manufacturing and Distribution Planning

OneWorld Xe (09/00)

Appendices

(�����"=�(3�(�#"���5���� ('$����������������������������������������������������������������������

(�����"=�63����E��#�-�#�+��� 6'$������������������������������������������������������������������

-�.�����5���� 6'�������������������������������������������������������������������������������-�.������������"G������# 6'�����������������������������������������������������������

��##"���;����#���=��#����#� 6':��������������������������������������������������������������##"���;��1 �#�1" ����C)�+����� 6'$:������������������������������������������������������##"���;��2���"�����#"�� 6'��������������������������������������������������������������������##"���;��;���5���"�� 6'�4����������������������������������������������������������������������

2���"�����#"���+�������5���"���)��""�� 6'�!������������������������������##"���;��8���"����#��-#���5���"�� 6'������������������������������������������������

2���"�����#"���+��8���"����#��-#���5���"�� 6' ���������������������##"���;��)�@�"����#�+��)��������+"�"#"����=��# 6' ������������������<�����"�����#.�������.�#���;6� 6' 4���������������������������������������������������=��#"���2 ����������#��#������E��#�55 6' 4����������������������������������

2���"�����#"���+��2 �����������=#��#"�� 6' &������������������������)���"�����#.�����-#���6� ���� 6' !��������������������������������������������������������

2���"�����#"���+���=��#�-����#���6� �����#�����E��# 6' !����������������������������������������������������������������������������������������

)��"��"���#���2���"���<�� 6' �����������������������������������������������������������������

Index

1–1OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Overviews

��"���#"������"�������"���"�+���#"����.��#�#�������+��#�"�������"#".�#"���"���#������� ���"�+���#"����.��#������ ���"����#���"��#������+��#�"������"�����#�����#��

����"������"#��+�#���+� ��"�������#�3

� -���#������"��

� 2 ���"�����#�������"��

Manufacturing and Distribution Planning

1–2 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

1–3OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Industry Overview

��"�����#��"�#����������#��#���"���#��������#����"�#����"#�����+��#�"��������"#".�#"���� ���"����-�����"#"����#�"�����#����# "������ ���. ���"�����#�#����+"=�����#����"�����#���������#������������ �#"���#������-����#��(�#"���

����"���#������"������"#��+�#���+� ��"���#��"�3

� -���#�����"�����#�����������#�+����#��"��2 ���"��

� -����#��(�#"��3����������#"#"���(����#���

Industry Environment and Concepts for Enterprise Planning

��#��"��� ���"���"����"���#��#���������#��+�� �����+��#�"�������"#".�#"���"���#"���-���"#�� �������.�"�������������#���#������#��+� ��"���+�������#� �@��#"��3

� ����"������������"��.�"��B

� ���#������#����������������������B

� ���#���� ��������������������B

� F������������������������ "��#������� B

���������"�"�� �3�� ���"������������ �����#�����#����=���#"����+�� �����������"����#�"���.�#�"�� "#"������"�+���� ���#"�"���#��+������#��"�H�./��#"�������#�������"�+���#"������������#"������"G�#"���"������ ����I( �������"G�#"��������#�����#��"����������������� �������#�����#��������+��������"G�#"��H�� ��������++��#����#�������"G�#"���

Planning Across the Supply Chain

F�����#��"��� ������"��#�����#���������#�����++��#"�� ��� ���"��#����H� �.� ���*�#���������"++���#��-��#�����#����#��"������� +C�++"�"��#�"���������#�����"G�#"������#��"����������""������.�"�����������#�����������+�#���#���#���*�#��6�#��������#��#�����*�#� �����#����� �������������#�������������� #����#��������������������"�������#"�� ���#"�"��#��"��������*�#�

���������#������+" "������*�#���� �"��������*�#"���#�#��"�����#�����.�"������#"���+����#��"��#��#�����"����.��#������#"����A"��������

Manufacturing and Distribution Planning

1–4 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

�����"�������#"#"���"���� ����� "�"#���#��"���#���"��#���"�������.�"���"�"#���#������#"#"����� �.�"������#����"���#��"���#"�����������#��"#"��"#�������#�����#�#��������#"#"���"���"���

����������#"����+�.�"���.� "����#��#�"#�����#��"��#�����#��������+#"����F�������"��"+"���#�#����� ��"�� �����������#������+�����.�"�����"+"��#"���#��������#������*�. �������"��#��� �#��#���#"�#�����#������"�#��#���#���#�C+"#����#���������� ��"�� ������������"��#��#������"+"��#"��#��#���#��"���@�"���1���=��� ���#��������.����"��������#��"����#��������+"������������ �G��.�"�����#���"#�������#����������������#�����#� ������+������������"#���� #"� �������#������. ���+������ "�"���"�� ���� �� �#"���#���� #"� ������+" ����"#����� �����������"#��#��"����������#��

����#���J.�"���������"#�H������������.���+��� �.� �.�"�������� ��#��#�"���#����C�"���"��� ��#���+����"�� �C�"���"��� �������"������#�#���"��.�"���+��#��� ����#�����"�� �C�"���"��� �������"�������#�"������#��"�.�"��������#"���#��"�� ������.������"����+�#��"�.�"��� �#"���"��

����������+��������������������.� ���"����+�#������������#�+���#"��.�#�����"�#��� ������=#��� �����"G�#"����(����#��"��#��#�����+� �.� �����#����+���#"���"��� C��"#"�����"��#�����*�#� �������"�.� �����"���"�����.������+� �������"���#������ �����"�����"���"�� ����#��+� ��"���+���#"��3

� 2����"��������"��

� �����������+����#�� ���"��

� -����#������������#"���� ���"��

� �����������������#

� �"#".�#"�������#����#�#"��

� (�����#"��

� ��#������"��

���������#��"�� ��*�� �� ���#�����#���������"�+���#"����"#�"��#��"#��#������#��"��� ������"��#��"�+���#"���#����#"�"G������#"������"����*��"�+���#"�������". ��������#��"��.�����"���5�*�#������#"#"���"���.�"����#����� �G������#�����������#��"�.�"�������#"��������������#��#�������"����*������++"�"��#�����#���#�����#��*������������.�"����������5�*�#���#"�"#"���++��#�#���.�##��� "����+�� �"��� �������"G�#"������������"�#���#�������"�+���������"G�#"���.�������#������#����.���+"#�+���������#��H�*��� ���������*" �����"���"�+���#"��� ����������������#��� �����������#�������++"�"��# ������� ���+�#��"���#���"#����"���#�������� "�����

���"#"��� �������"G�#"�������#���#��"�"�#��� ������=#��� �+���#"���2 ������.#�"����"�+���#"���+��#�������"G�#"�������#����+�������#��"�+���#"���"�#��������#��"������#���"#���#���������"��#"������"��#"��

Industry Overview

1–5OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����+���#"��� �������������� ���#��"�� ���#"������������� ����"�+���#"������"���"����������#"����++"�"������1���=��� �����"��"�+���#"���.�#���������"������"����������������� ���������#����#��������������"����@�� "#���� #�

�����H���#��"��� ������"�+���#"����"#��#��"��=#��� �� �#"���"���(��=��������+�"�+���#"���.�#�������#��"��"����������.�"���#�#����#��#.���+"#�� ��+�#�����#"�"���#�����"���"�+���#"����"#����� "��������#������"���������"#��� �"���"�+���#"���+����#�����#��"���� #�"��"�+ �#�� ���#"��������"������#�����#��#"���+�����*�����+ ��#��#"���"��#����*�#� �����(�"���#"�������+��#�� �#��������#"���#����*�#�����#�����#�+���"���.�"����#���.���+"#��+��� �.��#"���.������� ����

������"��#��#���#"�� ��� ��������� �.��#����#��� �����.�##��"�+���������. ��#��� ����"#���������""����.�#�#����� ��� "�"��#����#���1������������� "���#��������#�����������������#��"������ ������"�#���#������� �������"#�� ���� ���#"�"#"��

(����#����"�� ���3

� ������"��������#����*�#� ���������������@�"�* �������#��� �������#��"��=��#"������"�+���#"�������� ���"���.�����"��

� (�����. ����� �����"�����"������ ��#��#����"#��# ����#�����������#���"�#"���"���������

� 2�#���"������� �����"��.���+"#�+���"���������" "#������"��������+"#�." "#��

� ������"������� C#"���"�+���#"���#����*��"�#� "���#����""���#��#"������#��"�+�#����""." "#��

6�"���������"#"����������.�"���� �#"���"���������� �����#��#�. "�������@�"��#"������"�#�������������������F��������� �.��#"���� "�������=�� ��#��#������"���#���#�+����#���#��"��.������"#�� ��#�����#��"��#��.������� ����"����������*�#� ����

�"++���#� ��� ��+�� ���"������"���"�+���#"���#��#�"����"+"��#��#��� ��� �����"�+���#"���"�.�������#��������#��+���#�" �����#���#"���+����#��#�������"G�#"������"��"#�� ���"�������������"�� �� ���� ��� ��+�� ���"��"������#��������#��+���#�" ��@�"���+��� ���"�����������#��#"���+�����#"�����"G�������� ����� ���"��� ��� ���#�����#�#������ ��+�#�����=#�"���� ��� �� ����; #"��#� ���#��� ���#�� ���"��� ��� ������#���� ���#��#�����"��������#�#"���+�������������� "���#������ ��+������#��"�H�"�"�� �� ���

Manufacturing and Distribution Planning

1–6 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����+"#�#��� ��� ��+�� ���"���������".���"��#���+� ��"��� "#3

���������������� �����"���#� ��� ��+�.�"���� ���"����#�#��"��� ����"

#�����# "����+������#��"���(�#�#��"��� ��������#��

@��#"�������#����� "�������#�#��"��� �����+"���#��

.�����"���+�#����������H�.�"���� ������

��������#��#����������H��""���#�#����#���#�#��"�

� ���"���"�����=���#�#"����+�����������#��"���" �.�

"��#�������������#�#��"��� ���"���������/��#���������

������"�#��#���+�#���������#"���.�����""����

��� �

�������������� ���#"�� �� ���"���"����"+"���������"#��+�������#�" ��

#����#�#��"��� ���"����-#�"�#���. ���"�#��+������#��"��

����"#�����#������ ���"�����#�" ������#"�����"G���"

��� ����#���+��"�#��#���+�#�����#���#�#��"��� ����(

#��#"�� �� ��������#���@��#"���KF����" ���

��#��"�������� "��#���#�#��"��� ��BL����#"�� �� ���"��

"�#���+"#� ��� ��+���+"�"���#����"��#"���#��#�#����"

��������#�*��#�����#�#���#�#��"��� ���"������ ����

���"����#������ ��+������#��"������ �������#�����

@��#"��������3

� -����������������"�������"G�#"��B� -���������������"#".�#�B� -������������������+��#��B� -+������������"����"#".�#����������+��#�����"

����"#".�#�� �������� ������#�#������#���B

���#"�� ���� �����������#��"�H�+����+������"��� �

�"��C������J��� "�"#H�� ���"��������#"���#����+"�"��

���"+"�������� "����#�#��#�����#�#�#��"��� ���"��

��� ������� ���"�����"G���+��#��#"�� �� ���"���"

#��"�� ������ �����"��#���+�#�����������"#� ����""��

��������"��#�������#�#"���+����������������� "���

�#��#�����������#��+�#���������+���������������#"��

� ���"���"�#����"���#C ��� M�"#�.� �������� �����

��������@�"����#�

(+#�������#��"����+"���.�#��#�#��"������#��#"�� �� ����"#��+"���"#�� ���"#��#���+� ��"���� ���"����#��3

� 2"�"#��2 ���"��

� �����"#��)�@�"����#�2 ���"��

� 5� #"+��" "#��2 ���"��

� ���� "�������� "��

Industry Overview

1–7OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Priority Planning Systems

2"�"#��� ���"�����#��"���#���K���#L�����#���K����L�+������+��#�"�������"#".�#"�������"G�#"�����=��� ���+�������"�� ���������#�������������"����2"�"#��� ���"����"��������#��"��#�� �#������� �����������#�.� �����*���������/��#�����#������������������"��#�����"���#����#"����@���#"#���+������#�#��#�����*�#� ����"����"���#��#�+����+���*�#"���+���#"���"�������#��"��������=���#�#"���+���� ��������*�#"����#�.� ������"#���������#"��������"#".�#"�������"G�#"��H��." "#��#�����"�������#������������"���

A�"��� ��� ��+��"�"#��� ���"������. ������������#��"�� ����#����""���#��#����#���� �+�������#��"���"#���� �����"�������"#���#�����<���C#����� �"�������#"���� ���"�������#���+� ��"���� ���"����#���+�������� �#���""���+�������#������#"��������+� ��"���#��"�����".��#��������+��"�"#��� ���"��3

� 2����#"���� ���"��

� 1����#"��

� 5���+��#�"��������#"�������� "���752�9

� 5���+��#�"����@�"����#�� ���"���75)29

� 5���+��#�"����=���#"����#���75��9

� �� ����������#"���� ���"���7�,�29

Production Planning

(������#"���� �������#�#��#"�� �����#�#��"��� ���"������ ������ ��� ��+��#�" �"��������#���#"�����"G�����������2����#"���� ���"����������+�����+������#��#������ ����������������#"���� ���"���"����� �#�����"+"��������" �. ��+��#���#�����+�����"#���#��#�#�����#��"���"��#�����#�����2�/��#"�������������#��#����� �����+������#�����"���#���++���#�����5�*�#�.������*"����+��#���"�" ��"���#"��������#��"���#����/��#��� ��� ��+��������+��#�����#��"�H������#������������"����-���*�#�.������*"����� ������"��#��*�#���+� ��"���@��#"��3

� ������������#��#"� ���#���B

� -������*�#� ���� ��� ����"��� ����� �.� B

� F������������#"�"��#��#�����#�����������+����������#������"��B

2 ����������#�#�"� ��� ��+���#�" ���/��#"�����+����#�#��������*�#��������(#�#��������#"���� ���"��� ��� ��������"��.�������������"������#"#"���������"������������ �#�����#"+����#������������������."��#"����+�+����#"������������#"���� ���"���� ��������#��"��#�������"#�.�"���#�����#���*�#��������

Manufacturing and Distribution Planning

1–8 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Forecasting

1����#����#������ ����+���*�#��������+�������#��"�H���������"����2 �����.���#��"�+����#����#���#�#"#"�� �� ���"#����+��������#������#� "������"�" �������#������� ���+����=#��� �"���#��"�+���#"���

�����#������+����#"�����������"���+���������� ���������#�.���=��#�� ����������#�������#��+����#�+��#��"���#��"��#��.�������#"#"���"��#����*�#���#�#"#"�� ���#������� �.��#"����*��� �������������������#�#�� "������+����#���������

(����������"#����+����#�� ���"�.�##���������#���������"#�����+����#� ����(����#��"���"#����.�"���#�#����"�����#"��������"#����� ����������+���#"����������+"���������������������� �������"�����(���#��"���"#���#���.�"���#�#���������� �����#�#�����������#�����������#��"��#��#����"#��# �����#�#���������������. ��#��������@�"�* ��#��������"����*�#����������+#����#����������"++"�� #��"���"��"��������#��������*���"�������#���#����������� ��"*� �"�������#��#����

Master Production Scheduling (MPS)

5�#�������#"�������� "���752�9����"#".�#"���������� ���"���7�)29�"#�����=#� ��� ��+�#���� ���"���#��#����52��"�#���."����.�#������ ���"����/��#"�������� ���"����=���#"����52����+"��������#�+��" "������#���#"����"G����������#�����*��������#���2 ���"����#�#���52�����)2� ��� ����#�������"���� ��� ��+�� ���"����(#�#�"� ��� �����"+"��� ��������#�"�� ����#�����"������������"���.�"�����*�#���

52�����)2����"������#�#���.�"������#����������"���������" �. ��������#�� ����#���#�.����@�"���#��+� +" ���#������������52�� "�*"�+���#"���+���"����#������"#".�#"�����#"�"#"��#��+"�� ������#"����"#".�#"�����#��"�����52��#����#��"����@�"��� ��� ��+�"����#�����" �����+��#�"���������"�����52��#����+"����� "���. ���������������#��52�����"���#"+�����������#������� "���. ����"���������#��������"#����52��"���"�#�#��������+��#���������#�+�����#�� �����/��#�����#������������)2���+"���#���"#���#��#��������"G�#"����������#������"#�"#".�#"����������)2����"����""." "#��+��#����� "�����+�"#���#�������##�����#��"������� #"��#� ��#��#�����#����

Material Requirements Planning (MRP)

�����#���52��+��#���+"�"���������#�"��#��#����#������#��#�"�+���#"���#������#�� ���C ��� �� ����+�#�����������#��@�"���+��#���+"�"���������#�2 ���"����#�#�"� ��� ��+���#�" �"��� ���5�#�"� �)�@�"����#�2 ���"���75)29�2 ���"�����"G������"�����������*��5)2�� ���"�������#�������"��� ��� ��+�� ���"����������#�#�"� ��������������#�" ���� ���"��� ��� ����#����#"+��#"���������*�#���"#"�������"�����./��#"���

Industry Overview

1–9OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

5)2��������������#���������������C�#�. "����� �#"���"���.�#�����#�����������#�����#�����������#��@�"���#����*��"#��5)2������." ��+��#�"� ����"���"��� "#��+���#�"� ��"#������"�� �� �#"���"��#��#�����������#������� �������#��"���#����� �� �#"���+�����"+"����������#�.������#����������+��#����� "���. ���5)2�� ���"��������#��#�#���������"#���������" �. ����������������#��������������

Manufacturing Execution System (MES)

����+"�� � ��� ��+�����+��#�"���� ���"���"�#���5���������5���"��������#�" �����"����+�5)2��-��5����#����#���� ���#����=��#�"#���� ���#"������������ ��+�������#"�����#"�"#�������#"�����"G���"����������#��#"� �����������"��#���+��=���#"���#"��������5���� ���"�#����� C#"�����#"�"#"��#��#�����#��"�������� "������#�������+ ������"�� ������"������"��#��� "#��"����"�#���#��+��"�"#"��+�������������#��#��++��#������#��"��"������"+"��#"���+����

Sales and Operations Planning (S&OP)

�� ����������#"���2 ���"���7�,�29��������#���#��"��� ���"�����,�2 "�*�.�#������ ��������*�#"����"#������#"����-#�� �� "�*������#��"�H#�#��"��� ����� ��� ���������=���#"���� ���+�������#��"��������./��#"����+�,�2�"�#��������"��#������"�#���#������*�#"���� ���#��#�"���#���C+������"#�������� ����#��+�#������ ��� ����5��������#������� �����#� �����#"��#����"���#����,�2�������#������� ������#�������" ���"��"#"��.�#������� �������������+��#�����#��"�������#�+��" "��

Capacity Requirements Planning (CRP)

1� ��"����"�"#��� ���"���������#��"����� ���� "��#��"#�� ���#���#�. "���#"��C����������+��������(����#��"����������"#��� ���"����#���#������#��#�"#������������#��������#��+���*�"���#"+"����"#��#����"�"#�� ���"����#�����)2���� �G�������������������� ���@�"����#���#�� "���������� ��#��"�.� �����.�#�����#����@�"�������������#�������#��+����������" �. ���(�� �������#��"������#���#����"��++"�"��##"���#����@�"�������������.�������#������ ��#"����#���"#".�#��#����* �����������#����="#"���������

Resource Requirements Planning (RRP)

����#"�����"G�������+����#�+���������#"���� �������.������ ������(� ���������������@�"����#�� ���"���7))29�#����#��"���"+������#��"����#���������#������#�#��������#�����#�����+���*�#��#�"������ ���;"���))2�������#��"���=��"�����������+����"#� ��@�"����#��+��" "#�����������������"#"��� ����������.�" �"������������������� ��������������"��������#����"�"����2�/��#������������#��"�� �� ����"������������#�"�#��"����(����#��"����#�� ����� ��#��#�����"��� ��� ��+��#������"������#��"�����#�"�"�+���#"���#����#��"���#����=��#�������������#������#�#������"+"��+���#"����1���=��� �����#��

Manufacturing and Distribution Planning

1–10 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

�����#��"��#���#����#������� ��� ��+������������������#� "���2 ����������� �� �#�� ��� ��+��=���#��������#"���"�#��#��������#"���� �������� "��#��#����.��))2�

Rough Cut Capacity Planning (RCCP)

(+#�������#��"����/��#�#�����#�������#"�������� ������ ��������������#������"#��� ���"���7)��29�#����#��"���#�������+ ��� ����#��(���#��"�� ��*��#���*����#�������#�� �/�.��@�"����#����������"�����"������� ������"�#�����"����#�����������+ ��� ����#�"��#��������������#� ��� ������+����#����������� "��#"���"�� ���������.��� �"+"��#"���(����#��"����� �G��*���+��" "#"������#�"�#�����#��#����#� �#��� ��� ��+��+���������������#�"�#�*" ��(����#�"�#��"#�"���������#"�������"�#�� ��� ��+���#��#�#��#������#��"�������� "����#��������#"�������������#�� ���.�����������)��2��� "��#�����#��������#��"������������ "����� �������* ����+���52���#������#�"�#���"�#��(�/�#���#�#�������"#��"�� �����.�#�����#� "�"#���#���#���+� ��"��3

� -����"������" �. ��������#������#�����@�""#"����+������@�"����#�#�� "������+��" "#������

� F""���#�����������������"#�"����#"�����"G��

-+������#��"�������#���@�"��#���*" ����@�"����#��#����"#������#�����##������"�#���52��� ����(������"G�#"��������@�"����������#���"��� ��� �+�#���� ���"����#���#���������#��������#�#���"�.� �����.�#�������� ������������

�)2��� "��#��#���5)2������ ����)2���� �G��������#��#������#��"������#������#�5)2��5)2�������#�+������� ��� ��+������#"�����)2���� �G���*����#������������������#��"�������"�.� �������"#��#�""�+���#"���������#��"������"�� ����#�� �#"���������� ��"���#�����* ����#����#���������++ ���"�����*������@�""���#�� ����������� �

������"�"#��� ���"����#���������� "��#"����#���#��#�"����"+"��#��#��� ������ ��� ��+���#�" �����#���#"�����"G����)������)�@�"����#�2 ���"��7))29��� "��#�������#"���� ���"������" ��)�������#������"#��2 ���"���7)��29�� "��#��5�#��2����#"��������� "���752�9�������"#��)�@�"����#�2 ���"��7�)29��� "��#��5)2���" ��"���#0��#��#�7-0�9����#"����#����� "��#�5���+��#�"����=���#"�����#���75��9�

Input/Output Planning Strategies

-���#0��#��#�7-0�9���� �"����������+ ����� "��#������*�� ���������"#����#�" ��� �G��#���#�� �����#����=��#�*" ��@�"���#���������"#����1��� #���#"���������" �. ��.������#���#"�����"G���"�"����"�#����++ ���"��� ��������*������� "������#"�������� #"� ���"+#"��������". ����#����#�.� �������� ��������������"������"��

Industry Overview

1–11OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

5����������"��������#����+���#"��#�����������#���#���������#��"� ���"������ ��5�#"���� ��#��"���#"+������"�������#��"��#��#��@�"�"��������#�+������"�����������������+"�"���� ���"����������#���������#"�����"��������#�#�������#�#�����#"����� �����"���������"��� �����������"�"���������++"�"��# ��#��#�����*�#� �����5�#"��"����������#�#���� ��+����#��"��#�����������+������� ��� ��(���#��"�������+����������.��#���������"#�����#�#�#��"��#����*�#� ����#����+�#���#�#���K6�#�"��� �L�.�"��������=���#���#���� ��+���+��������������"���#����"�� "����+���#�������"G�#"���#����������"�#�

Multifacility Planning Systems

5� #"+��" "#��� ���"������#����"@���#��#����. ���������+�����������"G�#"��"�������#��"��#��.��+� +" ���.�����#�������"G�#"����"#�"��#�����#��"����������� "���� #"+��" "#��� ���"����������"�����������#���#�. "��"�#��� ��� ���������������#��*����#��"������� #"+��" "#��� ���"���#��"�#���#���� ���������"��� ����#"��� ���������#"���#� �.�����"��

����#�#��"���="#�+���� #"+��" "#��� ���"��������+"#�#�#�������� "��#��� ��� ��+����� #"� ��������� ���#"���"�#����"�� �����"�"���"#�����"���� "��#�����#���� �������"����� ��"���������#�#�������#�#����#��"��

����������#�#�������� ���� �#"���"��.�#�������� ����������������"G�#"����"#�"�������#��"���(������������"G�#"���� ������������#��� ��"#�������"���#��� ���#�. "����.��#�������"G�#"������"�� �#"��� #�#����"�.�����������"G�#"�����.������ �#"���"��

(�� ���������� �����#� �"����#���#�������� #"+��" "#��� ���"����6�����"����#���"���# �����#��"���������"����#�"������� ��#�.�����"��2 ����������������"����#�����#������#������������� "��#��#��*�������� ��+�� ���"�����������"�#��� �+��" "#��.�������"�#������="#"������." "#"���"#�"��#�����#��"��.�+���� �"����������=#��� ���� �����"���#���.���+"#�+���� ���"�������+��" "#"�������#���"���#�����������#" "G�#"����"���������������"��"����#������#� ��"������������#����*�#�����������������#���#�#����#����

Supplier Scheduling Systems

(��������������������������"���+����#�������"G�#"������"�������#�������#���#�. "��� ���"�������"�+���#"�����#����.�#�������� �"��� "�*��+����� �����"��

���������� "������� "����� ������������"������ "���"#�����"#��#�"��"���"�+���#"����������������+" ��#������#������#"��������� "����2 ���������#"�#���������#��#�.�#������������������� "��#���������� "���#�� ���������#��#�����+#�����+"������. ��*�#������"#��#�. "����@���#"#"��+�����������������������������������+�������� ����"���"#��������� "����#��������� "����������#����#��#����/��#�� ���+�

Manufacturing and Distribution Planning

1–12 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

�������+����#�����"���������#"���������� "�����(������"����������.���+"#�"����"#��� "��"��+�������� "������������. �����#��"�������*����"�#C�+C����� "��"��+���#����=��#� ���#"��������#������ "���� "��#��������#��#��������#"��� ���#"���#��#�������������#��-�#�����+��� �"���"����#���#��#�������������+���"��"��#"������#��"������� "���+���#�����"�#��+����

2�#���"�����#��#�.�#�����������"��������"����#������"�����#������������#"��� ���#"��������������#"��C#�C��*�#�+�������#��(���#��"�������� "�C����� "�����#���� ��"��#������� ���"���"�+���#"������.�"���.�����"��������� "������. �����#".�#��#���������#� "���#����� �������� ��#��#��"�"��#��+���*�����"�+���#"�������������� �������������"� ��"�������"��"���#"��������� ��#��"��������#���#"����#���������������� ����#����#�. "��������"��#"��� "�*�#�����������#����������@�"�* ������". ��

Industry Planning

������"���+#�����#���*�����""���"�� ��#����"��� �#"�����"G���������"��������"��#����H���*�#��@�"������������#��.������+ �=". ������#�������������#��� ���"�����#��������#�����#"����� �����"����������". ��������"����������#��"�� ����#�����*�C#�C�������"�����#�"�#�����+��"�#�"�"�������*�C#�C#��*���" �������5�*�C#�C��������+��#�"�������#�� ���#"��#����#�������������������"���#��� ���"������#�������"��#���"#���#�����@��#�"�#�����+�����"���+���������#��"����� ��#"����+"#���

�����"+#�"��+�����@�"������"��������#"�������� ���"������#��"������#���"�"�"G�� ���#"���+�������#����" �." "#��#����������#�+� �����"����(��=��� ���+���#�+� �����"���"�� ���������������"#�#"�����"�������#"�������"���

1���=��� ���@�"�*�� ���"���"�����/��+��#��+��#��"��������#"#"���"��#��� ��#��"��"���#������������#��+�#"���"#��@�"��+�������#�#��.����"��������� �������������������� "�����#��#�����*�#� ���������� ������#�����#��"���-+��������#�#�*��#��� ����"��#���� ���"�������� �����#����������#"����������#��������#"#�������"��#�����*�#�����

����+� ��"���#�. ������"G�������"#"�� �� ���"������"���#"���+����"��"���#"�3

Industry Overview

1–13OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

������������

���������������������

�����������"�������������������#� "+����� ��

-����"�� ������"���� �.� ������#"#"�����������#��

������ �.��#"������������"����6������#����� ���

���������" ���#����"����+�� ��#��"�������#��������

����"�����#"�����#��#�����*�#��<"+�C��� ����+"#�." "#�

.���������#���"�+ ������"��� ���"���+���"��C#�������

� ��#��"��"���#"���(�� ��#��"��#����� ������#�

�#��������#������������#���������� "����

����+��#�"������#��"���@�"��"�������� ���"���

2�#C��"���� ����������#�"������������+�� ���"��

+��#����"���#"��

������������������ (�#���." ������+��#�������#��"�����#"������ �

���"��������"�������"�" ��������1�@���# ���#��

���"� ������+��#��������#�������#"������""���#��#

+ ������������ �����"��#������#"�������"G�#"����(

#����������� �����#�������#��� "�����+�"�#���#��

��������#��#�"�#�����+�����#����������#��(��

�� #��#����"����#������������������� "��#�����"��

@�� "#�����+"���#"���#���"�"�"G�� ���#"�������

� �#"���"������ �����.�#��������"� ������+��#��

����#��"���� "������� ���#����������� ��� ��+

�� �.��#"�������� "����������"�������#"#"���"��#��

��#���." ��"���#����������������#��"����#����"��

��#C� ����#������"���

���������������������

����������������

-��#�����#��-1(���#��"�������� "�������"��� ��� ��+

"����#���#��*�#���������"����+��=������������"#�

"������������"������#��++"�"���"����" ����"�#�"�"��

�"��� ��� ��+���#�����#"+��#"����-1(���#��"����#

"������#��"�� ���"�����������������������������

��� ��+���# ��"����#���

�������#��"��������������#"��� ���#"���������

��#�����#"���#�#��"��#�������#�#���-1(���� �����"��

���� "��� �#"���"�������������������#��#����� ���

����������#���"#�"��+����� "��� ��#"�������

��������+��� ���C#���� "�����#����� ��#"���#��#�"

"�+ �����������" ��.����������#��"�"�������" �." "#������

�� "��������� "����2�#��"���"����� ��#�����#���-1(

��� �����"��������� �.��#"���"�����"���#��#��

������"����*�#�������������#"���#"������#��"����

��*"���#�������+�����*�C#�C#��*������#"���#�

���. �C#�C���������#"����(�#����� ����"�#�����

���������#�#��#�����*�#� �����-1(�������"������

������+��=���"#���#"��C#�C��*�#�#�#��"����#��"

� ��#��"������#���#���������#��"������#������#��

�����"����#����"��#����"��C#������� ��#��"��"���#"��

-1(���#��"�������"G��#��������+��.�##��� ���"���#�

���"�������#"#"���"��#�����*�#� ����

Manufacturing and Distribution Planning

1–14 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

���������������������� ����#����� �#"������������#"�� �"���#"���������"@��

�����"#"�� �� ���"���������8 �.� ������#"#"������� ��

�����"�����*�#��+�����"�������#����"���#�

��������8���"����������#"�� ��++��#������#"#"������

�@�"�������#����#C����� ���C#���� ���"���

2�������#"�� �"���#"����� ��*"���+�������++"�"��#

����#��� �����#����#� ������������� ��� ����

"�#���#"��� ���� "��"�#��#��"������#� "������#��"�

���"�� ����#"���"����#���� ���"���#��#�"���������.�

#��"�������

�@�"����#�+����������#"�� ������#"���"��+#��

���"� "G��������+���������"#��� ���"���"�"���#��#�

2 ���"���� ��#��#�"�� ���������#��=�"�#"������� �#

"G"������#�"�#�������������������"��#����� ���

� ���++��#���������#"�� �"���#"���-������

�C��������"������+�#������ �������������#"��

"���#"��+����

���������� ���

��������!�����������

�28�"���#"���������������"#��"������������#"�"#�

���������"���#�����������28�� ���"���� ����#

"�� ����������������*��"���"��"#�� ���"���

�28�"���#"��� �����#�#����������#C#�C��*�#����

� "�"��#�����C�� �������������� �����"��� ���"��

���. ���28�������"��#��"������+����#���������+�

����������������� "+�C��� ��#"���#����*�#����������#

#����28���� �����"��#���+� ��"���#����"@�������� ��

#����28�"���#"��#�������#��� ���"���+����#�"� �� �.��

�����@�"����#������3

� ��� +C "+�����������#�#��������������#�.�������=�"�#"�����#�

� 6�������������#�#���������#�����*��������#���"�#�"��"�����������#"�������#��� ��

� J��#C-�C�"��H�7�-�9����������#�#����������#�

����� #"��#����� ��+������#��"��"�#�������#� ��"���#"+������@�"�* �����#��#��������������������#��"��#���� �.� ���*�#� ����������#��"����#�.��. ��#��� ������"�#� "���#�������+���#"������������ ��� ��+�#�����#��"��.�#��"�#��� �������"#��#�������#��+�#����=#��� ���� �����"��

(����#��"����#�.��+ �=". ��������#�������"��#���"#��"#���#����#������#��#�������#"���"��"#�� ��"�#��#�����������"G�#"���#��#�������"��#�������.�"�������" �.��#����#��#����"���#�����#"��� �#"���"���+��������#����#�����"��#��"�� ���"���������+� �����"G�#"����" 3

� 2��"��������#�#��#����#����=�������#�����=���#�#"��

� �� "��������#����#"��

� 2��"����=�� ��#���#������"��������#�"����#�����#"+��#"��

Industry Overview

1–15OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

� 6� �������C#"��������#��� "�����"#��#�����#"�� �����+���#�"� ���������

� -�� ����#�#���������#��+���#��"����#"�"G�#"���#�������#�#������ ����"�

�����#"#"���������*�#���������������������#���+�����+�.�"������#"��3

� ��#� �E�� "#��5��������#�#�� ��"���"�#������+������������#��"��". ������

� �#�#"#"�� ���������#� ��#��*"�����#������������� ���� �"�������#��"����������#"��

��#��"���������"�#���+����"� "G�����#����#���=��"���#��"�����"G�#"���#�"������#��"���*�#�������������#����"�� ����#���+� ��"���������#3

� �#�. "�"����"#�"��+������"G�#"��� ���� #���������"�� ����#"��������#�����#������� #�������#"����#��

� �#�. "�"����"#�"��+����� ��#"�������

� -�� ����#"�����#"�"#"��#���=#���������#��"����� �����"������������#���� �#"���"��+���������#����#���

� ���� ��"���������"�#�"�"�����#��"��� ����������#����" �"����������#���""." "#����������#��+ �="." "#��"�����#"���#����+������������"��#�����*�#� ���

Idea to Action: The Competitive Advantage

����+� ��"����=��� �����#��"�� ���. ���"��#�������+��#�"���"���#���#��.�"�����#"��#��#��#��� ����������. ��������#���"���#"��#��#�����++��#��.���������. ����������������.�"�����#"��#��#���� �����. ��������#������"���#���#�"��+ ��#���"����#���"����.�##��.�"����""." "#����#����� ���#"��������"�����������"�����#����#�����������

"������������������

������������������

����������������#

>������������ "#+��" "#��� ���"���#����+"���." ��+

��#�"� �������#"���+�������+��" "#��+��#�������"#���

�����#����"� �����#�"� ��6�5��������#"���+���

��+"����.�"�����"#�

-�#���#"���"���� #"+��" "#��� ���"�������������#�����

�++"�"��#�� ���"����-#�������"#������.��������*�"�

�����7�-29����"����� #�"����#���"���+����#�"� �

"���������������"��"����#����������#����� ���#"���

Manufacturing and Distribution Planning

1–16 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

$������������%�

��������������&���

���������������������

��%���������"��#

�������"����#������������#���������������

�����#� ���������"#��# ��� ��������������"G�#"���

����� ���"������"#��+��-2��"����#��� ��� ��6�5�����

��#"���

������"�����"�#�"#��� ���"���#��"������� ���"��

������������"���������""�����*"���������#�����

�-2�����"����#�����"���� ���"���#�������#��#

"����#���"���"#������#��*���������#��*���

�������������������

������%��#

������"������ �������"#���+���#���+����#

�����#"���#���� "��#��"�+���#"���#��"����#���.��"#��

"���#"+"��#"����(��"�#"���� ���"#����"#��+����#"��

#����"@������#".�#��#��.�##��.�"����""." "#��

��#����� ���#"��������"�������+����#���������

��'�������������

�������������

�������������������

��������������#

-�#���#�����#�.������#��������#"��C#�C������

��#"���.��"#����� "��#�����#��*� ���#"���������#"���+�

�����#"��C#�C���� �#"����+������"#���

�������������'��

������������������

�����������

�������#

-�#���#����#���� ���"���#"��#��#��*���������#

+����� #"� ����� "���-�#���#����#���� ��#��*

��@�""#"�����#����������������#�����#"����� �

���"��

��'�����������

���� �����������

�������������������#

-���#"���������"�� �C�#�������"����"#��5��

�#�������"�#�����." "#��� �#"���#����� �#�

"���#"����=��� ��"�� ������*+ �������." "#"�����

���#���"����-�#���#"����� #�"����#���"����.�"��

�""." "#���������#����� ���#"���

��'�����������

����������������

��������'���������

�������(�����

���������#

-���#"������� ����#��.���. �� ��� ��������"��

��������#��""." "#��

��'�����������

�������������������

�����������������

�����)�������������

������������#

-�#���#���+��#�������������� "��)� ���������� "��

����� ���"���#�� �����"�����C��#��"���""." "#��+�

�����#��� ���"����-���#"�������"�������+����#"��

�""." "#��������#��#"� ���#���"����( ���"���#"�����

."������������#�#����*�#�����@�"�* ��

1–17OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Planning Systems Overview

����5���+��#�"��������"#".�#"���2 ���"����#���"�����#��+���#��"�)�@�"����#�2 ���"��������=���#"���7�)2=9���)2=�� �������#������"��#�����"����#���������#�"� ������ �.��������#���� "��������#������"��#����������������� �����"�� ���C ��������+��#�"����#����� ������������������#��������#"�"G������������������#"������+��#�"�������"#".�#"��� ��"#"�����"�����#���)2=�+��� "G��#�����#"�"#"���+����������������#"���� ���"���

5���+��#�"��������"#".�#"���2 ���"������"#��+�#���+� ��"����#��3

� )���������������"#��2 ���"��

� 5�#�"� �2 ���"�������#"���

Resource and Capacity Planning

)���������������"#��2 ���"���� �������#����������+��". �������#"������� ��#��#��+ ��#������������+����#����������#"�������." "#������)���������������"#��2 ���"����#������"#��+3

*�������*�+���������

���������**��

;������#�" ���������+����#�#���#"��#��#���#"��

����������#��#�����������#����*���������#�+��" ��

*��������������

���������*����

�������#�����#�������#"�������� "��������

�@�"����#�#��#��������"#�����" �. ��"���"#"�� ���*

���#��

>������)��2�#����#��"���"+�������� ����"��#��

��#������� ��#�����#��+��". ����*� ������"�����

#�������+� "�"#���������

�������*�+���������

����������*��

�������#�����#�"� ��@�"����#�� ���#��#��������"#�

���" �. ��"��� ���*����#��

>�������)2�#����#��"���"+�������� ����"��#��

��#�"� ��@�"����#�� ���#�����#��+��". ����*� ���

��"������#�������+� "�"#���������

Manufacturing and Distribution Planning

1–18 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Material Planning Operations

5�#�"� �2 ���"�������#"������"�������#C������ ���#���������#�"� �@�"����#�#��#�����������#����*���������#��5�#�"� �2 ���"�������#"����� �G���������+���� ���������#"����"�� ��"��3

� ���#� ������#� "#���"#".�#"������#�������������

� -#�������+��#����"��.�#���"��#��������������"�����#

� ���"���C#�C�������#��#���"#��

� 5�"�#�����������"����������#"��� �"#���+��� ��#������@�"����#��"�#������

� ���� "�C��������"����#��

����5�#�"� �2 ���"�������#"����#������"#��+3

$�����������

*�+�����������������

�$*��

2 ����������#� �#����"#".�#"����+�+"�"��������

.�����������������-�����"#"�����)2����"��

���#� "G������#� ��+��"#".�#"���"����#�"���������#�

������"��#����� ��"����#�� ���

,���������������

�����������,���

���#��������� ���+�"#�������@���#"#"��#��#����������

�=���#�#������+��#���

,�������*�+���������

���������,*��

;��#�����#�������#"�������� �������������."

�+���#�"� ������"����#��������#���� �� �#�

#"��C��������#��@�"����#�+�������"#�����������#�

��� ���+������"�����#�"� ��@�"����#�

System Integration

����5���+��#�"��������"#".�#"���2 ���"����#���"�#���#���"#��#��+� ��"����#��3

��%������,��������� ���� "��#���.�"��"�+���#"����.��#������"#���7�

"����"��#9����������#����.������"�#"������"#��+

�������#��*"���#��������� ���#"���

�������������

,���������

���� "��"�+���#"���+�����. �C#�C�������

��*�C#�C����"#���

����������� 8����#��� ����/��#"���#��#��������#������ ���#��

��#�������#"�������� ��

Planning Systems Overview

1–19OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

��������,��������� ;��." ��+���#�"� �������#"���#������� ����*

��#"�"#���"#�"��#���� ��#�

�������������� ;��." ��+���#�"� ����#"����������*����#�

"�+���#"���#���� �� �#��#���#��������#��+����"#���

,������������

����������

;����#"���������*����#��"�+���#"���#���� �� �#�

��#�+�� �.������������������#�"� �+��������"���

��"#��+�#�������#�

�����-����

,���������

;��." ��+���#�"� �+��*"#�����"�������"���������+

�������+����������������+��#����"#���

����������� ;���=���#����� "������#��������������

�� ��"����#���#"���

Manufacturing and Distribution Planning

1–20 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����+� ��"�������"��" �#�#������5���+��#�"��������"#".�#"���2 ���"��"�#���#���"#���#���������������#���

ResourceRequirements Planning

(System 33)

ERPxEnterprise Requirements Planning and Execution

Tactical Plan

Operational Plan

Execution

Rough Cut CapacityPlanning (System 33)

Capacity RequirementsPlanning (System 33)

Finite Scheduler

ManufacturingAccounting (System 31)

Shop Floor Management(System 31)

Procurement (Systems 40 and 43)

Material RequirementsPlanning (System 34)

Master ProductionScheduling (System 34)

Distribution RequirementsPlanning (System 34)

Inventory Management(System 41)

Sales Order Management(Systems 40 and 42)

Forecasting (System 36)

Configuration Management(System 32)

Product Costing (System 30)

Strategic Business Plan

Product Data Management(Systems 30 and 48)

Planning Systems Overview

1–21OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Terms and Concepts

5���+��#�"��������"#".�#"���2 ���"������#���+� ��"���#�������������#3

.�������������� ������������#������ �#"���"���@�"���#����������

����#�"#����;��." ��+���#�"� �#�3

� 5�"�#�"����������+"���#"���+�����"#����"#���#���#"������"#"��� ���#����.�

� ��+"���@���#"#"���+�"�#����"�#�������#�"��������"#�+���������#���������#������#������+��#�"�������

� ��#��"�" ��"#���.������"���." ��+���#�"� ���#"�������������

*������� ��������#"����@�"���#���������#�������#�"#����;�

��#"���#�3

� ��+"��������#����+�#�������+��#�"���������"#�� �������+����#"�"��#����"� ���������

� (���� #���#������#"���#����#"��

"�� ������� ����+��" "#"�����#�������+ ��������#�����#"��

����#"���������;����*����#��#�3

� ��+"�����*����#�����.���������"�#"��� ��+"���#������.���+�����#��������"��� ��+"����#���� �.�������"�����������������#�� ��+"���"�+���#"���+�������"#��� ���"��

/����������������

�������/�-��

�����������#�#��#��������#����+"�������"�� ����#

�������#�����������#�#��#����;�����"���"��

�����������#�3

� ���#� �"#����������+�����"�� ������� -������#�����������������#��." ��+���#�"�

Planning and Production Environments

�����+� �� ���"��� ����#����#�����#"+��#"����������"�������������������#�������#����"��#��������#"���������#���� ���"����#������"��.�"���� �#"����(�" �#�#���.������"��#���+� ��"�������"�����#���"����#�#��������#����� �����#��#��"++���#���"�#�"��#�����"������"�����#�

Manufacturing and Distribution Planning

1–22 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

ForecastedEnd Item

ForecastedOptions

CustomerOrders

Make–to–Stock Assemble–to–Order Make–to–Order

,� ��������� ��������+��#����+�����"#���#��#����#���#���H

�����������"����+#��#��������#�"����� �#����>��

���#�������#�����+#��#��������#�"����� �#������"

���"�����#������ ��"��� ����#�" �"#����1����#"��

�+�����"#���"������"� �+��#��

����������������� ��������+��#����+��.���. "��#��#����#���#���H

��#"���� ��#"����>������#�������#�����+#����#"��

���+�."��#���.�#�.�+���+"�� ����. ���+�#��������#�

������#�������"+"��#�����#"���"��#���+"�� ������#�

�����+��#��#�����"���"��#�"����"�����#���3

� -#���������+"����������"���#��+��� ���#�� �� -#������+����#���������#������� ��������#��

�#�#�����#"��� ���

,� ���������� ��������+��#����+������#�"� �������������#�#��#

���#��*���#�������� ���#"����>������#�������#���

.�+�������.��"�������#"����#����� ��� �"��#��������#

#��#�������������#�#��#���"�� ����#���+� ��"��

+��#�3

� 2����#������#��"G���+�����"+"������� �����"#����������+����#��� 2����#"����@�"�� ����� ���#"��

Planning Systems Overview

1–23OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Planning a Total Business Solution

PeopleTechnology

Process

(�#�#� �.�"���� �#"���"�#���#��#�����"#"�� �� ����#3

����� 1��#�����#�"���#��#�� ����#�"������� �#"�������

��#����"��������#"����������������#�����"#���#�

������� ������� ���#����� "�"���������#"���#��������

�++��#"�� �������������� ��3

� 6�"���������C���"���"��� 6�#�����+��#�"������#"��� 1��� ��������#�#"����+�#��������#��#�"

��������.�����������#

��������� �����@�"��#���.�#�#�� �#�����#���/�.��������� ����3

� ������������+#���� ���� ����#��������#� (�0:�����������#���� �#+��

Manufacturing and Distribution Planning

1–24 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

People

2��� �����#���*���#��������-��� �"�������������"������� ��#����#�#���/�.��������"���#��#�#���"�����"���#���������+�������#��"��

,���������

����������

-�� ����#"���������+� �.�"���� �#"����@�"���

���������#�"��� �����#�#��#�"�� ���3

� ����"##"���#���#"�������+"����"� �������#�����"#"��#�#���+"#�#"��

� ������"���#���"�� ����#�#"���#�����"#��#����#��"#�������"." "#�������������#�." "#��#�����#��/�.

����������������� �++��#"�������#���������*����#���+��#���������

�������+�������"��#���+�#�����������#��"�#���#��

� �#"����#�"�� ����#�#"���#"���������"�������#��

+�#���������+�#����������� ����#"�"��#��"��#��

"�� ����#�#"���������-�����"#"����#���#������� ��.�

��C+���#"��� �

/������������������� 1��*��� ������+�#���.�����.�"���"���#��#���

���"�#����"#��5���+��#�"��������"#".�#"��

"�� ����#�#"������#"�"���#�"��#����������� ��.�

�����#���"��#���(��"����2����#"�������-����#��

���#� ����"�#��7(2-��9�7������@�"�� ��#9��-��� ���#�"

�����#"������ �����������#"�"��#"���"�����"+"������

������#�"�"���������;���#���"���.�#����#"���"�

#���"���#�������@�� "#��� �#"���

���������������� -�� ����#"�����.���C�� ��.�"���� �#"�����#�"

���#��������"��#�������#��#����� �������� "��#��"

��*��5�*"���#�"�����"����"+#��"#���#��"��#"��

�����#��� "��������@�"��*" �"���� �"������ ����

������"#���������"��#�����*� ����

���������� �����������)������<"����������� #"������"��

���#"���������#������ �#"���"��"�����"���+�����

���C#���+�#���������6�"�����#���.������#�"

� �#"���"��#���������"#"��� ��� ��"����"#�����

Planning Systems Overview

1–25OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Process

��#������� �������@�� "#�����#����"��#���#��#��+�#���.�"��������E�� "#���������� #�"����@�� "#�������#��(�@�� "#�������#����#���#������"+"��#"���"����"��������� ��������"���

�����������#��� ������#�.�#����#"������������#���.��"���#��=��#��(��������#"����������#������������������������������"����"##���#��������"����+#����+���#"��� "#��#������#�#����+"��"���

Technology

���������������#�����.�"���������C���"���"���#������+ �="." "#�������+#��������.��#�" ����#���+ ��#�������������#������� ����5� #"� �� ��#�����.���#��"++���#�#�����+�#����C���"���"����++�#��������"�������#��"���#�"#��������� ��+��"�� ����#�#"����������������+#�����++��#��+� ��"���+��#��3

� ;����+"��������

� 2���"�����#"��

� 6����0� ��#����#��#

� 5���+��#�"������#��#

� ��#��"G�������

6������������������#��������� � ��"�#���#����#�������"�������"+"��� �#"���#��������#��"��� ���"�������������������-����#������ ������2�������#��#������+� ��"�#���#����"#".�#"����#���#��#�����#�#��5���+��#�"��������"#".�#"���2 ���"����#���

Tables for Manufacturing and Distribution Planning

����+� ��"���#�. ���������#�������#�5���+��#�"��������"#".�#"��2 ���"���

����,�������0121� ���#�"��.�"��"�+���#"����.��#������"#�����+"����"�

"����#���������3

� -#������.���������"�#"��� ��#���������� ;�"#��+������

Manufacturing and Distribution Planning

1–26 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

.�����3�����,�����

��0124�

���#�"������������� ��#C ��� �"�+���#"���������3

� ��#� E���#"#"�� <���#"��� 6����� ��� ���#���������

.�����,��������,�����

��5224�

���#�"��"�+���#"����#�#���.�"�����"#� ��� ��.��#�."

�+���#�"� �������3

� ��#�����@���#"#"���+���������#� 1��#���������#"��� <��� ��+���#�" �+�������."

�������,�������

��5511�

���#�"��#�����#"���������#��#���������#���.��#��

)������)�@�"����#�2 ���"����)�������#������"#�

2 ���"�������������"#��)�@�"����#�2 ���"���������

����������5062� ���#�"��#���+����#���#��#��#�5)2����+���� �� �#"���

����#��#�))2��� "��#��

*��������5225� �#�����#"���"�+���#"����"�� ��"�������#���@������

��*����#��������#������������"���#"���

*�������7������5228� ���#�"��#������" �. �������"#��+���������*����#��.�

��������#�����������

"�� ������,�����

��52226�

���#�"����#�" ���#���.��#�� ���+"������*����#��

*��������������

��5525�

���#�"��� ���������+" ������"��)�����

)�@�"����#�2 ���"���

.�����*�����������

,�������5025�

���#�"��#������ �������������� �#"���"��������#��

.������

,��3,*�3$*�$�����

,������*�%��'��5011�

���#�"��#�����#"��������������#���.��52���5)2���

�)2�

,��3,*�3$*�9�'��

9�%��*�+���������

��5014�

���#�"��#���������+�����@�"����#�#��#������#��

#��"#���+�������#�"#���

,��3,*�3$*�

���������5015�

���#�"��#���#"����"����#��+��+����������#�

Planning Systems Overview

1–27OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

��������������

,�������0541�

���#�"����#��+�#�����#��#��#����#� ������ "��

��������#��"#��#������ "�����"�#�. ��� �����#�"�

"�+���#"����@�"���+�����#"���������"�#�"�"���#��

����� ���"�� ��"��3

� ��"�� ���#"��� ������ ������ ��"����##��� ��"����#�@���#"#�� �� "���� ���#"��

�����#������"�+���#"���+���#������� "�������� �

5�#��#�. ��+������� "���"#��������. ��*�#�����#��#

�������"��#������ "������� "��������

����������

�������������05411�

���#�"��#�����#��#��#�"���#"+"������#��"����� "#

�����#����.�#�������� "���.��"#���

Menu Overview

����� �����"��������#��������������"������������"������"����"G���.���#�������+�@�������+����

5���+��#�"��������"#".�#"���2 ���"������������#����#��3�

� )���������������"#��2 ���"��

� 5�#�"� �2 ���"��

Resource and Capacity Planning (G33)

� Resource Requirements Planning (G3311)

Daily Processing (G3310)

� Rough Cut Capacity Planning (G3312)

� Capacity Requirements Planning (G3313)

� Rough Cut Capacity Planning (G3322)

Periodic Processing (G3320)

� Resource Requirements Planning (G3321)

System Setup (G3341)

Manufacturing and Distribution Planning

1–28 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Fast Path Commands for Resource and Capacity Planning

����+� ��"���#�. �����"���#���+�#���#����������#��#������������#������������#���)���������������"#��2 ���"���������1����������������������#��#���+�#���#����������"��#���+�#���#��.�=�

���� ,��� ��������

��" ��)������)�@�"����#�2 ���"�� 8 $$ �))2

��" ��)�������#������"#��2 ���"�� 8 $� )��2

��" �������"#��)�@�"����#�2 ���"�� 8 $ ��)2

2�"��"��)�����0�����"#��2 ���"�� 8 �$ 2�(2

)�����0�����"#��2 ���"�����#�� 8 :$ �(2�

Material Planning (G34)

Daily Processing (G3410)

Periodic Processing (G3420)

Advanced & Technical Operations (G3444)

System Setup (G3440)

� DRP (G3411)

� MPS (G3412)

� MRP (G3413)

� Multi-Plant (G3414)

� Forecasting (G3421)

� Single Site Planning (G3422)

� Multi-Facility Planning (G3423)

� Forecasting Setup (G3441)

� Requirements Planning Setup (G3442)

� Multi-Facility Setup (G3443)

Planning Systems Overview

1–29OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Fast Path Commands for Material Planning

����+� ��"���#�. �����"���#���+�#���#����������#��#������������#������������#���5�#�"� �2 ���"�������#"���������1�����������������������#�#���+�#���#����������"��#���+�#���#��.�=�

���� ,��� ��������

5�#�"� �2 ���"�� 8 : 5(�

�)2���" ������#"�� 8 :$$ �)2

��)2

52����" ������#"�� 8 :$� 52�

�52�

5)2���" ������#"�� 8 :$ 5)2

�5)2

5� #"C2 ��#�2 ���"�����" ������#"�� 8 :$: 5;<�-

�52

�"�� ���"#��2�"��"��2 ���"�������#"�� 8 :�� 2��

5� #"C2 ��#�1��" "#��2 ���"�� 8 :� 252

5�#�"� �2 ���"�����#�� 8 ::� �5(�

5�#�"� �2 ���"�����#�� 8 ::� 5(��

5� #"C2 ��#���#�� 8 :: �52

Manufacturing and Distribution Planning

1–30 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Prerequisites

Manufacturing and Distribution Planning

1–32 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

2–1OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Prerequisites

������#���5���+��#�"��������"#".�#"���2 ���"����#�������+� ��������� ������#��������#���-����#���5��������#���� ������5��������#�����1����#"����#����++��#���#�"� ����������"#��� ���"���

-�����"#"����������� ������#����������� � �����"������. ����#�"� �@�"����#�� ���"���75)29�#���������� #"� ���������2�� � �����"��������#������� �#"���#��#����#����@�"��#������ �#����*��"#�"����#���

2��@�""#�����"#��+�#���+� ��"���#�*3

� ;���#���"���-����#��������� ������5��������#

� ;���#���"���1����#"��

� ;���#���"���2�� � �2���"��

Manufacturing and Distribution Planning

2–2 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

2–3OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Understanding Inventory and Sales Order Management

����������#��������"#�����#������.����0� ��#�"�+���#"�����������"��#���5���+��#�"��������"#".�#"���2 ���"����#����"#��#���"�+���#"���"#�����#�����#�������#����#������� �����#�"� ��@�"����#�� ��������"#".�#"����@�"����#�� ���

;��#���-����#���5��������#��#���#�����"+��#���+� ��"���"�+���#"���+������"#������"�"�+���#"���"��"#"�� �#��#���5���+��#�"��������"#".�#"��2 ���"����#��3

� 2 ����

� 2 ���"���+��" �

� ��#���������

� ;�"#��+������

� ������ "�������

� A� ��������� "��

� 2 ���"�������

� 2 ���"���+������ �

� 2 ���"���+����

� 1��G��+����

� 5������"� ���+����

� <���#"��

� )�����@���#"#"�

See Also

1������"�+���#"�������##"����������"#�����#������.����0� ��#"�+���#"�������#���+� ��"���#��"��"��#����������������� ��������3

� ����������� ���������� �����

� ���������������� ����� �����

� ������������ ��������������

� �������� �������������������

� ����������� ����������������� �����

� ����������� ����������������� �����

Manufacturing and Distribution Planning

2–4 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

� ����������� �������������������� �����

� �������������� ���������� �����

� �������������� ��������� �����

� !��"���#������ $��������

� ����������� �������������������������

� ����������� �������%���������

� ����������� ������ ���������������������� �����

� &������������� ����� ��������������������� ������

Understanding Sales Order Management

������ ������5��������#��#������"���"���#��#�"�+���#"���#��#��5���+��#�"��������"#".�#"���2 ���"����#���

�� �����������#���+� ��"���"��"+"���#��++��#����5���+��#�"�������"#".�#"���2 ���"��3

� �� ���������#������#�#�������+��������+��������#������� ��"#���

� 2"�*���#������@���#"#"���������.��5)2�+����#�"� �� ���"���

� �� �������"#���� "���#�����+�����#���#"�� �����#����*�����

See Also

1������"�+���#"�������##"�������������#"���� ����������#���+� ��"��#��"��"��#���'����(��������� ��������3

� !��"���#���)���������� �����

� !��"���#���&���������� �����

2–5OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Understanding Forecasting

�++��#"������������#��+��"#".�#"�����������+��#�"�����#"�"#"��.��"���"#�����#���"���������#"�"��#"���#���������+�#�����*�#��1����#"���"�#��������+���/��#"�����#�� ���������"�#��#���+�#����-�� ����#"����+����#"����#���� �������#���������#���*�#�#��������� ��@�"�* ���#��#�����������*��"�+��������""����.��#���������#"����

>����������+����#�#����*��� ���"������""����.��#3

� ��#�������

� -����#��

� �� "�����+�����

� ��*� ���

� �����"#���@�"����#

� ������������

� <�.�

� �@�"����#

� 6����#

� ���� �����#��+����������#

� ��*+�����@�"����#

����1����#"����#��������#��#���+� ��"���#�����+�+����#3�

$�������������� ��#�" �+����#����.�������"��"�"��� �"#���

���������������� �������7��������#��9�+����#����.������� ���

�����#��������������������#� "���

��������������������� 2 ���"���." �+����#����.�������������+�"#���"���

." ��+���#�"� �+���#�#��#��+ ��#��������"#���"�� ����#

����"#�"�.�" #�

Manufacturing and Distribution Planning

2–6 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����1����#"����#��������#�����������/��#"���#��#����������"���#�+�#��������������� ���"������������ "����#��������� ���"����������� "����#����� �� �#����#�"� ��@�"����#�+��� ���������#� ��� �+��������#�"� �#������ �=��.���. "��

Detail Forecast(F3460)

DRP Distribution Requirements Planning

RRP Resource Requirements PlanningMPS Master Production ScheduleMRP Material Requirements Planning

Detail Forecasts

����)������)�@�"����#�2 ���"���7))29��#������+����#�#���#"��#�#���#"��������������������#����*���������#��

����5�#��2����#"��������� ��752�9��#���� ������������ ��#��������#�������������=���#�#������+��#����1����#��������52��"���#�#��#��� ���#��"����������.�+����������� �#�����������#"���� ����(��"#"��� ��� ���������#������#�#�������+��������+��52��

5�#�"� �)�@�"����#�2 ���"���75)29�"�������"������������ "����#��#��#��=�����#����@�"����#��+�� �52������#�"#���#��#�����������#� ��� �>�������� �����+����#���"���#�+�� ���C ��� �5)2���������#�#��#�����"�����#��"#��"���������#�����������"���"����������#��"��# ����=� �"�� ��#"���#�������#"����+�����#"�� �������#��#�����#"�� ��.������� ��#��

�"#".�#"���)�@�"����#�2 ���"���7�)29�"������������#��#���#��#�� ���������#� �#����"#".�#"����+�+"�"����������>����������+����#���"���#+���)2��������������������#� ��� ���#����������#��#�������� ��#������"#".�#"����

Understanding Forecasting

2–7OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Features of the Forecasting System

>������#���1����#"����#���#�3�

� 8����#��+����#

� ��#��+����#������ �

� 5�"�#�"��.�#������� ����#����+����#�����+����#������#���.��#���#��

� ���#����"@���+����#�.�� ������#���

� �����"G��#���� �������"#�����#��"�����* �������#� ��#"�����"��

� 8����#��+����#�.�������������� ��+�$���"++���#�+��� ��#��#���������"�#���+�+����#�"#��#"��������"��#�������#�

� �� �� �#����"����+�#���$��+��� �����"���#���.�#�+"#�+����#

� ��+"���#����"������#��#�#����#������#������"G��� ������"#�"��������#�" �+����#

� ���#���� #"� ���"����"���+������.��*���#��������������"#����#�������������"��������������#���#������"��������"��#�����#�" +����#�#�. �

� )��"���������/�#�.�#��+����#������ ��������#�� ��#����� ��� ��+#����"�����

� -�#���#��#�����#�" �+����#������"�#���)2��52�������5)2������#"��

� 1�����������������#�������������#� ��� �#��.�#���"���� ��� ���� ���� ���

� ��#���.����+ ���#�������#�������������#���.��#���+���������.�"��������#���� ���

� �#��������"� ���.�#���"�"�� �������/�#���@���#"#"�����������#

� (##�������"�#"���#�=#�#����+����#��#�#�����#�" ����������� ���

1 �="." "#��"���*���+��#����+�#��������������1����#"����#����������#�����#��+����#�#�*��"�#��������#�@���#"#�#"���"�+���#"����������� �#����������#�� �������"#�������� ���@�� "#�#"���"�+���#"����������������"��#���� ���������#"#"����������������#�������#��������@���#"#�#"���"�+���#"�������� �������#����/�#�"#��"#��@�� "#�#"���"�+���#"������������������#���������"G��+����#��#����#�������������#��#������*���#����� ��� ��+�#���+����#�#����#���#"�� ������#��� ��#��� ��� �

>���������+���"�� �#"���.�������#���"�"#"� �+����#�#����������"++���#"#��#"����(+#�����������#���+����#��#����#�������#����������+��#�"�������"#".�#"���� ����"#���������������������������

Manufacturing and Distribution Planning

2–8 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

�����#����"#��G���������#"�����#�" �������1���=��� ���"+�#���@���#"#"��������#�"���=#��#��� ������F"#������#�" �1����#�8����#"�������#�0�������(�#�� ����G���������#"����#����#������#��G���������#"�������"��#���1����#�#�. ��71 :&�9�

Forecasting Levels and Methods

>������������#��.�#����#�" �+����#�7"�� �C"#��9�����������7�����#� "��9+����#�#��#��+ ��#������#����������##���������#������ �G����#�� ��#��� �� �#��+����#��"���$��+����#"�����#���������+����#�"�� ������#�" "�+���#"����#�#���"#��� ��� ������"���C ��� �"�+���#"����.��#���.�������#����������������� ���

Best Fit

�����#������������#���.�#�+"#�+����#�.����� �"���#���� ��#��+����#"�����#����#����#�� �������"#������������"���#���+����#"�� �#"���#��#�����#�� ��"#������������������#����.�#�+"#�+����#��#���#������������#�� �� �������"#�"��#��+����#�+�������"+"��#"����"������������#�����������#� ��������"++���#�+����#"�����#������� ���������"�#���� ���������#����#������������#�����#������#��+����#��#���.�#�+"#�

History FutureHoldoutPeriod

Demand

Best Fit

Present

�����#������#���+� ��"����@�������+�#���#����#��"���#���.�#�+"#3

$� ;����������"+"�����#����#��"�� �#����+����#�+��#����� ���#���"���

�� ���������#�� �� ��#��#���"�� �#���+����#�+��#����� ���#���"���

Understanding Forecasting

2–9OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

� �� �� �#��#��������#�����+�����������#���������.� �#�����"�#"���#���#��"�����"���+����#"�����#������#�� �� ����#�����#�����#���#�� � ��������#�������"#���#��������#�����+�����������#��������.� �#�����"�#"����.�������#�������"�����#"���#��#������ ��#�

:� )�����������.�#�+"#�+����#�.��#��������#�����+���������#��#�"� ��#�#��$��������#�7����������9���#���������.� �#�����"�#"��� ��#�#��G���

Forecasting Methods

����1����#"����#������$����#����+��@���#"#�#"���+����#"������"��"��#����"�����#�������"���#���.�#�+"#�+������+����#"���"#��#"�������"+��#�����#����#��#��������#�#����#���#�����"��#�������"�����#"��+��#������#����#�" �1����#�������72 :&4�9�

,�����1

�������-%��9���:���

��"���#�������#���2����#�����<�#�>���+��� ��#�

�� #"� �������+����#���"���.��#������"+"��������#���

"���������������

��"���#�����@�"��#������.���+���"���+��#���.�#

+"#�� �����������+�� ���"#���#��+����#�����������"

��#����"���+� �#��+����#��������+������� �"#��

�"#�����#������� "���

,�����4

�����������������-%��

9���:���

��"���#�������#����� �� �#���2����#�����<�#�>��

+��� ��#���������#�����#�� ���+���"������"+"����+

� ��+���#���������"����+�#������"�����������

�#�����#��"����������#����"���������������

#������ #"� "���������"���.��#��������#����#�

��#��"���#���+����#�

��"���#�����@�"��#������.���+���"����+�� �

�����"#���� �����������+�� ���"#���#��+����#

����������"���#����"���+� �#��+����#���#C#��

�������+������� �"#����"#�����#������� "���

,�����5

9���:����� ���:���

��"���#������� �#����H�� ��+��#���+� ��"������H

+����#�

��"���#�����@�"��#������.���+���"���+��#���.�#

+"#�� �����������+�� �������"#���#��+����#

����������"���#����"���+� �#��+����#��������+�

��#��������#��"#�� ��� ��������������� �������

�"#���#���#����

Manufacturing and Distribution Planning

2–10 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

,�����0

,�%����%�����

��"���#�������#���5��"���(������+��� ��#��������

#������"+"������.���+���"���#����/��#�#�����=#

��"����>������ ����� �� �#��"#��+#���7���#� �����#

��#�@��#� �9�#���+ ��#������"���������� ��� �

��"���#�����@�"��#������.���+���"���+��#���.�#

+"#�� ��#������.���+���"����+�� �������"#���#�

+����#�����������"���#����"���+� �#��+����#

�������+����#��������#��"#���#���#����

,�����;

9��������&�������

��"���#�������#���<"����(���="��#"���+��� ��#�

�����#����#����+���#������.���+���"����+�� �

�����"#���������/��#�#�"�#����#��#���+����#��>��

��� ����� �� �#��#���#�������#� ��#����#��#��������"�

#����

��"���#�����@�"��#������.����"���+��#���.�#�+"#

� ��#������.���+����"+"������.���+���"����+�� �

�����"#������"���#����"���+� �#��+����#�������

+�����������#��������#��"#�����"#��#���"#"����

����#"���#����#��#������#�����#������� �+ ��#��#"���

,�����6

9�����+����*���������

�9�*�

��"���#������"�������@��#"������"."�����#�"��#C "��

� �#"���"��.�#�����#����"#�"�� �� ����#������#��

�������+�#"����<�)�+"#��� "���#��#���� ��#���������+

��#������#��#�#�������+�#���@�����+�#����"++�����

.�#�����#�����#�� �� ����#����"�#�����#������"��

"�������"�"�"G��������+����#�"�����/��#"����+�#�"

#�"��#� "���"�#��#���+�#���

��"���#�����@�"��� ����#���"#���+��#�����"��

�����#���.��#������.���+���"���+��#���.�#�+"#�� �

#������"+"������.���+��"#�"�� ���#����"�������

�"�"�����@�"����#�"�#����"#�"�� ���#����"�#����"

��#����"���+� �#��+����#�������������#����"��

"����#����"��#�����#��

,�����8

������$�����

���&�������

��"���#�������#����������������(���="��#"��

+��� ��#��� �#��������.�������#������.���+���"��

�+�� ���"#���#����/��#�#���+����#�

��"���#�����@�"��#������.���+���"���+��#���.�#

+"#�� ��#������.���+���"����+�� �������"#���#"��

#�������"���#����"���#���+� �#��+����#��������+�

���C#���

Understanding Forecasting

2–11OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

,�����<

���&����,�����

��������-%���,�����

������

��"���#����� �������#��� ��#�#������.���+���"��

+��#���.�#�+"#�. ��*��+�� �������"#���#�#"����

���#���"��������� ���������#����"��������������

�"#����"���#�����"+��"#����"���#����"�"�" ��#��5�#���

$��2����#�����<�#�>�����=���#�#��#������������"+��#��

���.���+���"���#��#����������#���.���

������"���������#������ ��#������#�"���#�����@�"�

��"���.�#�+"#�� ��#������.���+���"����+�� ����#�

"��"��#������"���#����"���+� �#��+����#��������+���

� ������#����

,�����=

"�������,�%���

�%�����

������"��#���5��"���(������+��� ��"�"�" ��#�

5�#����:��5��"���(������+��� ���.������"#�������

#������"������#�H�� ���"#���"��"��#���#����/��#�#��

��=#����#�H�� ���"#����F��������"#��#�"�+��� �

���������"�����"��#�+��������+�#����"����"���

��"���#�����@�"��#������.���+���"��#�����"��

� ��#���� ����"����+�.�#�+"#���#����"�" ��#��5��"��

(�������#�"���#���� ����������#�������"#�"���#

�����������+�������#��"#��#����#�����

����� "#�����"���#����"���+� �#��+����#��������+�

��#��������#��"#���������#��#�"�� �#"�� �� ��� �

,�����12

9��������������

��"���#������ �� �#������"��#�����������+���#�� �

��#���;"���#������.���+���"����+�� �������"#��

#�����"��#����� �� �#"���7+���$�#��$�9�"��"��#���"��#��

����"�����#"���������#����������#����#"��

����"���#����"�����#��"��#��������+���#���+"#

7 ��#���"��#9�#��#���+"�� �7��#���"��#9�������#���#���

��/��#�#�"�"�+���#"���#���������"���"��#���+����#�

��"���#�����@�"��#������#��.�#�+"#�� ��� �����

�"#���+��#������.���+���"������"+"���"��#��

����"�����#"���

,�����11

/&�����������������

��"���#������ �� �#�������#��������������"��

.����������#"��#�������#"���#�������� � ��� ��+

� ������#���� ��#����"#�"�� ���#����"���

��"���#�����@�"��� ����#���"#���+��#���#"��

��"��������#���.��#������.���+���"���+��#���.�#

+"#�� ��#������.���+��"#�"�� ���#����"������"+"���

�����"�"�����@�"����#�"�#����"#�"�� ���#����"���

��"���#����"���+� �#��+����#�������������#����"

��� "����#����"��#�����#��

Manufacturing and Distribution Planning

2–12 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

,�����14

/&�����������������

'��� �������

�����������

��"���#������ �� �#����#������������ �"���=��������

�=�����#"� �����#�����������+���#���� �����

�"#���������#���#������� "������/��#"����+�#���#���

#��#���+����#�������/�#�+��#�������� �"���=�

��"���#�����@�"��#������.���+���"���+��#���.�#

+"#�� ��#��������+�� ����#������"���+� �+��"#���#��#

�����.�#��#������������� "#��"��#���+����#��>������

��#��#���� ��������.�#��+��#���������#����#��

�� �� �#��#�����( ��������.�#��+��#�����#������#�"��

���#��#�#����#������#���� �� �#��#������#���

�������+��#�������� � ��� �������"#�����+�� �����

#���#������������#��+�#���+����#������#"�� ��

Demand Patterns

����1����#"����#������� �������"#���#�����"�#�+�#����������1����#���#�������" �. ��"��#��������������1����#"����#������#�" ���+��#������������##���" �#�#������#���+� ��"���������

>�������+����#�#���"���������#���������+�#���+� ��"���"�+���#"���+���"��������������#���#�3

� ���� �

� 2���#"��� �"#��

� ��#�������

� ���"�����#

� -�#�� ��#�������

>�������� ��+����#��������+��#���+� ��"�������+��#�"���#�#��"���"��#�������+��#�"������"�����#�"����"���#��������������3

� 5�*��#��#��*

� (��. ��#�����

� 5�*��#�����

Understanding Forecasting

2–13OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Six Typical Demand Patterns

Demand Demand Demand

Demand Demand Demand

Time Time Time

Time Time Time

Horizontal Demand Positive Trend Demand Negative Trend Demand

Seasonal Demand Trend-Seasonal Demand Non-Annual Cycle

Forecast Accuracy

����+� ��"���#�#"#"�� � ���������#������������+���+����#3�

� (� ���C#���+����#�"� �������#��#��������#C#���+����#��.�����#���+�#���"�#��#���+�#���������/��#�#���+����#��#���������"�. ������++��#�#���+����#�

� (�+����#�+���������#�+��" ��#����#��.�����������#��#������+����#+��"��"�"��� ����.���+�#��������#�+��" ���������������� ������#�����#���+����#�+��"��"�"��� �"#�������"G��"�#��#�����������#"��������������#��+����#�

Manufacturing and Distribution Planning

2–14 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Forecast Considerations

>������ ����#�� ���=� �"�� �������#���#��#��+����#�+�#��������������+� ��"����"���#������"��#��++��#�����.�"��������@�"������#����"���������"+������+����#3�

� D��������#�#��#�����������#���#�

� 2 ���+��+�#���� ������#"��

� �������"����#"��� �����"�#���#"��� ��� "#"�

� D��� ���������������#���� �#"��

� ���#����������������#�� ��"�#�

� -�����#"���+��������#"#"��

� ������"��������

>�������� �����#���+� ��"���*"����+� ���C#���#������� �"�#��"�+ �����#�����"����+�����+����#3

� 5�*�#�����

� <���"���������"��"��"��#�

Forecasting Process

>������#����=#��#��� ������F"#���������#���������#��+���#����� �����F"#���#�. ��71:�$$%9��#����� ��������#�" �#�. ��71:�$$9����.�#���"�#��"#���#���1����#�#�. ��71 :&�9���#���1����#��������#�. ��71 :��9�������"������#���*"����+�+����#�#��#������ ���#�������#���

>������������#����#�" �+����#�������"���+���#�" �+����#�.���������#�"��#���1����#�#�. �����#��+�������+����#�����#����.����"���

����+� ��"�������"��" �#�#��#����@������#��#�����+� ��������������#�����#�" �+����#"���������

Understanding Forecasting

2–15OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Sales Order HistoryF42119

Detail Forecasts

Force ChangesP34610

Enter/ChangeSummaries

Summarize DetailForecasts

Price RollupsP3460

Forecast PricingP34007

Generate DetailForecast

Enter/ChangeActuals

Extract SalesOrder History

P3465

Review By TypeP34300

Forecast SummaryF3400

DRP/MPS/MRPGenerationP3482

DRP/MPS/MRPGenerationP3483

OnlineSimulation

F3460 P3460

P34650

P34600

P34200

Forecast SummaryF3400

Detail ForecastsF3460

Enter/ChangeActuals

F3460

Manufacturing and Distribution Planning

2–16 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Evaluating the Forecasts

>�������� ��#�+����#"�����#����#�������#�����������$��+����#�+�����������#�������+����#"�����#�����" ���.�. �����#���� "��# ���"++���#��/��#"���������#��������+������#����+����#��"#�"�"����#"�� �#����*����./��#"������""�������"�����"���+����#�#�����"������� ���+��������+#��������#�

�����#�����#���#"�� ����� ��#����+�������+�������+����#"�����#���#��#������ ��#������+��������+�#��������#�+����#��>�������������.�#����#�����+��������"#�"���������.� �#�����"�#"���75(�9����������#��+��������72�(9��5(��"����������+�+����#�����2�(�"����������++����#�."���6�#���+�#������+���������� ��#"���#����"@����@�"����#�� � ���"#�����#��+����������"+"�����"����+�#"������"���"����+�����#�"#���"��� �����K�� ���#���"��L���K��"���+��#���.�#�+"#L�72619�

���������#�����+��������+���+����#"�����#��������#���+����#�+��� ��#��"�� �#����+����#�+��#����"#�"�� ��� ���#���"�����"++�������������#.�#�������#�� �� ����#������#���"�� �#���+����#�+��#����� ���#���"���

������� #"� ��+����#���#�������� ��#����#�"���������������+��������#�����5� #"� ��+����#������ �� �#���+��#����� ���#���"���������������#��#���*������ ���"#���+��#��#�������"����+�#"��������+����#"�����#���#��#��������#���.�#���#���7.�#�+"#9�.�#�����#���+����#�����#�����#�� �� ���"���#����� ���#���"���"�#������������������+�����"������� ������"���������#"���"����"+"��#������������#������"��#��������+������+����#������#"���#��#�����=#�

Mean Absolute Deviation

5�����.� �#�����"�#"���75(�9�"�#��������7��������9��+�#����.� �#���� ��7������"#���9��+�#������"�#"���7����9�.�#�������#�� �����+����#���#��5(��"����������+�#��������������"#�����+����#���=���#���"�����+����#"�����#����������#���"#����6�������.� �#���� ����������"��#���� �� �#"������"#"�����������#���#�����#"�������(�����#������� +����#"�����#�����#��������"#��#����� �#�5(��"�#��"�� ��#�����#� "�. ��+��#��#������#�+��#��#��� ���#���"���������#���+����#�"���."����������������� ���"#".�#������"�� ����#����#"�� �� �#"���"���="#.�#�����5(������#����#�����������������+��"#".�#"����#��������"�#"������������@�������3

� 5(��?�7�Σ N�(�#�� �C�1����#�N�9�0��� �#���������"�#"����(σ)�≅ $��4�5(�

� 5�����@��������≅ Cσ�

����+� ��"���#�. ������#����� �� �#"����+�5(��+��#����+�#���+����#"����#�������"��=��� �������#��#�#������������"+"���"��#�������"����#"���#��#�#����� ���#���"��� ���#��72619�"��@�� �#��4���"���

Understanding Forecasting

2–17OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Method 1, Percent Over Last Year

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

�������7���������������������,�$)!�%���.�>;

ÑÑÑÑÑÑ

>��ÑÑÑÑÑÑÑÑ

��� ÑÑÑÑÑÑ

1�.ÑÑÑÑÑÑ

5�ÑÑÑÑÑÑ

(�ÑÑÑÑÑÑÑÑ

5�� ÑÑÑÑÑÑ��� ÑÑÑÑÑÑ

�� ÑÑÑÑÑÑ

(��ÑÑÑÑÑÑ

���ÑÑÑÑÑÑÑÑ

��# ÑÑÑÑÑÑD��ÑÑÑÑÑÑ

���

ÑÑÑÑÑÑ

$%%&ÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑ

ÑÑÑÑÑÑ

ÑÑÑÑÑÑ

ÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑ

ÑÑÑÑÑÑ

ÑÑÑÑÑÑ

$��ÑÑÑÑÑÑ

$$�ÑÑÑÑÑÑÑÑ

$� ÑÑÑÑÑÑ

$ % ÑÑÑÑÑÑ

$

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ112�������-%��9���:������������������������������ÑÑÑÑÑÑ>��

ÑÑÑÑÑÑÑÑ���

ÑÑÑÑÑÑ1�.

ÑÑÑÑÑÑ5�

ÑÑÑÑÑÑ(�

ÑÑÑÑÑÑÑÑ5��

ÑÑÑÑÑÑ���

ÑÑÑÑÑÑ��

ÑÑÑÑÑÑ(��

ÑÑÑÑÑÑ���

ÑÑÑÑÑÑÑÑ��#

ÑÑÑÑÑÑD��

ÑÑÑÑÑÑ���ÑÑÑ

ÑÑÑ$%%!ÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑ

ÑÑÑÑÑÑ

ÑÑÑÑÑÑ

ÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑ

ÑÑÑÑÑÑ

ÑÑÑÑÑÑ

$:$ÑÑÑÑÑÑ

$ �ÑÑÑÑÑÑÑÑ

$ 4ÑÑÑÑÑÑ

$4 ÑÑÑÑÑÑ

$:&ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

�������������������������������������ÑÑÑÑÑÑ

>��ÑÑÑÑÑÑÑÑ

��� ÑÑÑÑÑÑ

1�.ÑÑÑÑÑÑ

5�ÑÑÑÑÑÑ

(�ÑÑÑÑÑÑÑÑ

5�� ÑÑÑÑÑÑ��� ÑÑÑÑÑÑ

�� ÑÑÑÑÑÑ

(��ÑÑÑÑÑÑ

���ÑÑÑÑÑÑÑÑ

��# ÑÑÑÑÑÑD��ÑÑÑÑÑÑ

���

ÑÑÑÑÑÑ

$%%!ÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑ

ÑÑÑÑÑÑ

ÑÑÑÑÑÑ

ÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑ

ÑÑÑÑÑÑ

ÑÑÑÑÑÑ

$�%ÑÑÑÑÑÑ

$ $ÑÑÑÑÑÑÑÑ

$$: ÑÑÑÑÑÑ

$$% ÑÑÑÑÑÑ

$ !

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

��������?������/�����)���������������

ÑÑÑÑÑÑ

>��ÑÑÑÑÑÑÑÑ

��� ÑÑÑÑÑÑ

1�.ÑÑÑÑÑÑ

5�ÑÑÑÑÑÑ

(�ÑÑÑÑÑÑÑÑ

5�� ÑÑÑÑÑÑ��� ÑÑÑÑÑÑ

�� ÑÑÑÑÑÑ

(��ÑÑÑÑÑÑ

���ÑÑÑÑÑÑÑÑ

��# ÑÑÑÑÑÑD��ÑÑÑÑÑÑ

���

ÑÑÑÑÑÑ

�ÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑ

ÑÑÑÑÑÑ

ÑÑÑÑÑÑ

ÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑ

ÑÑÑÑÑÑ

ÑÑÑÑÑÑ

$�ÑÑÑÑÑÑ

$ÑÑÑÑÑÑÑÑ

�$ ÑÑÑÑÑÑ

: ÑÑÑÑÑÑ

%

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ,�����������$�%������>�14@1@41@50@=�3;>1;A0

Method 4, Moving Average

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

�������7���������������������,�$)!�%���.�>;)�>0ÑÑÑÑÑÑ

>��ÑÑÑÑÑÑÑÑ

��� ÑÑÑÑÑÑ

1�.ÑÑÑÑÑÑ

5�ÑÑÑÑÑÑ

(�ÑÑÑÑÑÑÑÑ

5�� ÑÑÑÑÑÑ��� ÑÑÑÑÑÑ

�� ÑÑÑÑÑÑ

(��ÑÑÑÑÑÑ

���ÑÑÑÑÑÑÑÑ

��# ÑÑÑÑÑÑD��ÑÑÑÑÑÑ

���

ÑÑÑÑÑÑ

$%%!ÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑ

ÑÑÑÑÑÑ

ÑÑÑÑÑÑ

$�4ÑÑÑÑÑÑÑÑ

$�� ÑÑÑÑÑÑ$ ! ÑÑÑÑÑÑ

$:�ÑÑÑÑÑÑ

ÑÑÑÑÑÑ

ÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑ

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

5��"���(������1����#�+��#���F� ���#�2�"����8"������?�:

7$�4�O�$���O�$ !�O�$:�9�0�:�?�$ $� (����H%!

7$���O�$ !�O�$:��O�$�%9�0�:�?�$ � �����H%!

7$ !�O�$:��O�$�%�O�$ $9�0�:�?�$ :��4���$ : ��#��H%!

7$:��O�$�%�O�$ $�O�$$:9�0�:�?�$���4���$�% D����H%!

7$�%�O�$ $�O�$$:�O�$$%9�0�:�?�$� ��4���$� �����H%!ÑÑÑÑÑÑ>��

ÑÑÑÑÑÑÑÑ���

ÑÑÑÑÑÑ1�.

ÑÑÑÑÑÑ5�

ÑÑÑÑÑÑ(�

ÑÑÑÑÑÑÑÑ5��

ÑÑÑÑÑÑ���

ÑÑÑÑÑÑ��

ÑÑÑÑÑÑ(��

ÑÑÑÑÑÑ���

ÑÑÑÑÑÑÑÑ��#

ÑÑÑÑÑÑD��

ÑÑÑÑÑÑ���ÑÑÑ

ÑÑÑ$%%!ÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑ

ÑÑÑÑÑÑ

ÑÑÑÑÑÑ

ÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑ

ÑÑÑÑÑÑ

ÑÑÑÑÑÑ$ $

ÑÑÑÑÑÑ$ �

ÑÑÑÑÑÑÑÑ$ :

ÑÑÑÑÑÑ$�%

ÑÑÑÑÑÑ$� ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ�������������������������������������

ÑÑÑÑÑÑ

>��ÑÑÑÑÑÑÑÑ

���ÑÑÑÑÑÑ

1�.ÑÑÑÑÑÑ

5�ÑÑÑÑÑÑ

(�ÑÑÑÑÑÑÑÑ

5��ÑÑÑÑÑÑ���ÑÑÑÑÑÑ

�� ÑÑÑÑÑÑ

(��ÑÑÑÑÑÑ

���ÑÑÑÑÑÑÑÑ

��#ÑÑÑÑÑÑD��ÑÑÑÑÑÑ

���ÑÑÑÑÑÑ

$%%!ÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑ

ÑÑÑÑÑÑ

ÑÑÑÑÑÑ

ÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑ

ÑÑÑÑÑÑ

ÑÑÑÑÑÑ

$�%ÑÑÑÑÑÑ

$ $ÑÑÑÑÑÑÑÑ

$$:ÑÑÑÑÑÑ

$$%ÑÑÑÑÑÑ

$ !ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

��������?������/�����)���������������

ÑÑÑÑÑÑ

>��ÑÑÑÑÑÑÑÑ

��� ÑÑÑÑÑÑ

1�.ÑÑÑÑÑÑ

5�ÑÑÑÑÑÑ

(�ÑÑÑÑÑÑÑÑ

5�� ÑÑÑÑÑÑ��� ÑÑÑÑÑÑ

�� ÑÑÑÑÑÑ

(��ÑÑÑÑÑÑ

���ÑÑÑÑÑÑÑÑ

��# ÑÑÑÑÑÑD��ÑÑÑÑÑÑ

���

ÑÑÑÑÑÑ

�ÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑ

ÑÑÑÑÑÑ

ÑÑÑÑÑÑ

ÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑ

ÑÑÑÑÑÑ

ÑÑÑÑÑÑ

� ÑÑÑÑÑÑ

$ÑÑÑÑÑÑÑÑ

�� ÑÑÑÑÑÑ

$� ÑÑÑÑÑÑ

$:

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

,�����������$�%������>�4@1@42@12@10�3;>=A0

6�������#����#������"����#���5��"���(��������#����"������������"����"#����#����� ��5(���%�:��+��#����"������ ���#���"���

Manufacturing and Distribution Planning

2–18 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Percent of Accuracy

2����#��+���������72�(9�"����������+�+����#�."��������+����#������"#��# ��#����"����"����#�"�������� �#������"����#�����#�"�������+����#�������"#��# ��#��� ����"����#�"�������������������#�����"������ "����(�+����#�#��#�"�$����"#�#��� ����#��������"#�#����"�������#��������"#�#����"������ ��.�������."����+����#��������"#"�������+�$��"����� ���.��#�������#"�������+���������

���?�(�#�� �C�1����#

������������#�����.��#����"��"����#������������#���+����#�"���."�������� ������#��+��+�#��#��*�����.������#��.�++��#�������-��#�"�"#��#"����"#"���#���"���#��#�#��� "�"��#��+����#������"#�"�#�������#����."���+����#��F�������"����"���"���#"���#���"#��#"����.������� ��.�"�#���#�����#��������������"������ ��.������#�++���"��#���+"#��"��������#�������#�++���+��#�����=#�#�����"����-����"���"���#"���#������"#�����+�+����#����"���� �������"#"�� �#����"�+����#�."��

2�(�?�(Σ (�#�� �� ����"����� ���#���"���0�Σ 1����#�� ����"����� ���#��"��9�P$��Q

D�#��#��#�#�������#"�������#����� ���#���"���� �����"#"������#������ �����#"������������#���#�#� ��+���#�� �� ���=�����#���#�#� ��++����#�� ���#����#"��"����#��#����$��������#���+�������"#�"�"���". ��#�.������#����$��������#������#����������+����#�"���."�����#���2�(��#"�"�$��������#������+����"#�"�������"�. ��#��.��%4������#������#��#����#�.��$$�������#������#�������2�(��"#�"��� ��#�#���+����#"�����#����#��#�����2�(��#"��� ��#�#��$��������#�

����+� ��"���#�. ������#����� �� �#"����+�2�(�+��#����+�#���+����#"����#�������"��=��� �������#��#�#������������"+"���"��#�������"����#"���#��#�#����� ���#���"��� ���#��72619�"��@�� �#��4���"���

Understanding Forecasting

2–19OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Method 1, Percent Over Last Year

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

�������7����������������������-�)!�%���.�>;

ÑÑÑÑÑÑ

>��ÑÑÑÑÑÑÑÑ

��� ÑÑÑÑÑÑ

1�.ÑÑÑÑÑÑ

5�ÑÑÑÑÑÑ

(�ÑÑÑÑÑÑÑÑ

5�� ÑÑÑÑÑÑ��� ÑÑÑÑÑÑ

�� ÑÑÑÑÑÑ

(��ÑÑÑÑÑÑ

���ÑÑÑÑÑÑÑÑ

��# ÑÑÑÑÑÑD��ÑÑÑÑÑÑ

���

ÑÑÑÑÑÑ

$%%&ÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑ

ÑÑÑÑÑÑ

ÑÑÑÑÑÑ

ÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑ

ÑÑÑÑÑÑ

ÑÑÑÑÑÑ

$��ÑÑÑÑÑÑ

$$�ÑÑÑÑÑÑÑÑ

$� ÑÑÑÑÑÑ

$ % ÑÑÑÑÑÑ

$

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ112�������-%��9���:������������������������������ÑÑÑÑÑÑ>��

ÑÑÑÑÑÑÑÑ���

ÑÑÑÑÑÑ1�.

ÑÑÑÑÑÑ5�

ÑÑÑÑÑÑ(�

ÑÑÑÑÑÑÑÑ5��

ÑÑÑÑÑÑ���

ÑÑÑÑÑÑ��

ÑÑÑÑÑÑ(��

ÑÑÑÑÑÑ���

ÑÑÑÑÑÑÑÑ��#

ÑÑÑÑÑÑD��

ÑÑÑÑÑÑ���ÑÑÑ

ÑÑÑ$%%!ÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑ

ÑÑÑÑÑÑ

ÑÑÑÑÑÑ

ÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑ

ÑÑÑÑÑÑ

ÑÑÑÑÑÑ

$:$ÑÑÑÑÑÑ

$ �ÑÑÑÑÑÑÑÑ

$ 4ÑÑÑÑÑÑ

$4 ÑÑÑÑÑÑ

$:&ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

�������������������������������������ÑÑÑÑÑÑ

>��ÑÑÑÑÑÑÑÑ

��� ÑÑÑÑÑÑ

1�.ÑÑÑÑÑÑ

5�ÑÑÑÑÑÑ

(�ÑÑÑÑÑÑÑÑ

5�� ÑÑÑÑÑÑ��� ÑÑÑÑÑÑ

�� ÑÑÑÑÑÑ

(��ÑÑÑÑÑÑ

���ÑÑÑÑÑÑÑÑ

��# ÑÑÑÑÑÑD��ÑÑÑÑÑÑ

���

ÑÑÑÑÑÑ

$%%!ÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑ

ÑÑÑÑÑÑ

ÑÑÑÑÑÑ

ÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑ

ÑÑÑÑÑÑ

ÑÑÑÑÑÑ

$�%ÑÑÑÑÑÑ

$ $ÑÑÑÑÑÑÑÑ

$$: ÑÑÑÑÑÑ

$$% ÑÑÑÑÑÑ

$ !

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

�����+�(�#�� �?�7$�%�O�$ $�O�$$:�O�$$%�O�$ !9�?�& �

�����+�1����#�?�7$:$�O�$ ��O�$ 4�O�$4 �O�$:&9�?�!�4

2�(��#"��?�7& ��0�!�49�P�$���?��%� &Q

Method 4, Moving Average, n = 4

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

�������7���������������������,�$)!�%���.�>;)�>0

ÑÑÑÑÑÑ

>��ÑÑÑÑÑÑÑÑ

��� ÑÑÑÑÑÑ

1�.ÑÑÑÑÑÑ

5�ÑÑÑÑÑÑ

(�ÑÑÑÑÑÑÑÑ

5�� ÑÑÑÑÑÑ��� ÑÑÑÑÑÑ

�� ÑÑÑÑÑÑ

(��ÑÑÑÑÑÑ

���ÑÑÑÑÑÑÑÑ

��# ÑÑÑÑÑÑD��ÑÑÑÑÑÑ

���

ÑÑÑÑÑÑ

$%%!ÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑ

ÑÑÑÑÑÑ

ÑÑÑÑÑÑ

$�4ÑÑÑÑÑÑÑÑ

$�� ÑÑÑÑÑÑ$ ! ÑÑÑÑÑÑ

$:�ÑÑÑÑÑÑ

ÑÑÑÑÑÑ

ÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑ

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ,�%����%��������������������������������)!�%���>0ÑÑÑ

ÑÑÑ>��ÑÑÑÑÑÑÑÑ���

ÑÑÑÑÑÑ1�.

ÑÑÑÑÑÑ5�

ÑÑÑÑÑÑ(�

ÑÑÑÑÑÑÑÑ5��

ÑÑÑÑÑÑ���

ÑÑÑÑÑÑ��

ÑÑÑÑÑÑ(��

ÑÑÑÑÑÑ���

ÑÑÑÑÑÑÑÑ��#

ÑÑÑÑÑÑD��

ÑÑÑÑÑÑ���ÑÑÑ

ÑÑÑ$%%!ÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑ

ÑÑÑÑÑÑ

ÑÑÑÑÑÑ

ÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑ

ÑÑÑÑÑÑ

ÑÑÑÑÑÑ

$ $ÑÑÑÑÑÑ

$ �ÑÑÑÑÑÑÑÑ

$ :ÑÑÑÑÑÑ

$�%ÑÑÑÑÑÑ

$� ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

�������������������������������������ÑÑÑÑÑÑ

>��ÑÑÑÑÑÑÑÑ

��� ÑÑÑÑÑÑ

1�.ÑÑÑÑÑÑ

5�ÑÑÑÑÑÑ

(�ÑÑÑÑÑÑÑÑ

5�� ÑÑÑÑÑÑ��� ÑÑÑÑÑÑ

�� ÑÑÑÑÑÑ

(��ÑÑÑÑÑÑ

���ÑÑÑÑÑÑÑÑ

��# ÑÑÑÑÑÑD��ÑÑÑÑÑÑ

���ÑÑÑÑÑÑ

$%%!ÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑ

ÑÑÑÑÑÑ

ÑÑÑÑÑÑ

ÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑ

ÑÑÑÑÑÑ

ÑÑÑÑÑÑ

$�%ÑÑÑÑÑÑ

$ $ÑÑÑÑÑÑÑÑ

$$: ÑÑÑÑÑÑ

$$% ÑÑÑÑÑÑ

$ !

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

�����+�(�#�� �?�7$�%�O�$ $�O�$$:�O�$$%�O�$ !9�?�& �

�����+�1����#�?�7$ $�O�$ ��O�$ :�O�$�%�O�$� 9�?�&:%

2�(��#"��?�7& ��0�&:%9�P�$���?�%!��!Q

6�������#����#������"����#������"������������#����"������������"����"#������2�(�� ��#�#��$��Q�+��#����"������ ���#���"���

Manufacturing and Distribution Planning

2–20 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Tables Used by Forecasting

.�������7���,�����

��2226�

-���#"+"��.������� ��#�������������.�"�����"#

"�+���#"����������������������"�#"���������"����

��#����������

�������.�� ,�����

��2121�

�#���� ������"�+���#"�����#�"�"���#����#����

���������� �����������#�������#������#��#�

���������������

��5022�

���#�"��#���������+����#������#���.��#����#��

����#�������"G���� �������"#������#���.��#��

�=#��#��� ������F"#���������

���������������"��

��50226�

(��"�#��#��������������+���#���1����#

�������#�. ��71 :��9��"#��#�����#�" ������"��#��

1����#�#�. ��71 :&�9�

����������������50228� �#����"���"�+���#"���+��"#����.��������#��������

���."��#"���+��+����#�#����

����������5062� ���#�"��#�����#�" �+����#������#���.��#����#������

#���� �������"#������#���.��#����=#��#��� ��(�#��

������

������������B��

����������02=1�

�#���#������������#��#�#��#�����������#����+�

����������#��"������

����,�������0121� �#���.�"��"�+���#"����.��#��������+"����"����#��

"#����������"#������.������"�#"������#����������

������"#��+�������

����.�������0124� ��+"���������"�#�"������������� ��#C ���

"�+���#"������������#��@���#"#"������"�� � ���#"���

������#����������+��.����� ��� �

�����-����$�����

��0411�

2��"���� �������������.��#����@��#�����#������

�#������#�"�#�. ��#������#��#����� ������F"#��

#�. ��71:�$$%9�+��+����#��� �� �#"���

�����-�����������

��0411=�

���#�"����#�� ����#�����"������"���#���.�"�+��#��

+����#��� �� �#"���

See Also

� !��"���#���&�����*���������"��#���*���������������

2–21OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Understanding Parallel Processing

2�� � �����"���"���#����"@���#��#��"#".�#����*�#��#������� "��#"����+��������� #"� ���������"#�"�����2;��2�� � �����"��������#���#"���#��#����#����@�"��#������ �#��#�����*��1���=��� ���"+����������=��"�����#���� ����������� ����." ��+���#�"� ����� � �����"����������������"���#"��������+� ��"���"�#�������#��"���"+������#������ �.���+"#�+������ � �����"��3

� ������"#���� #"� �������

� <������ �����+���#���#����� ��� ��+�5)2

(���#�����+���� � �����"���"�#�����#�������� "��#"���#��#��"�"�����#��"�#�����#���"���������#���#���������#���������#��"�� #����� ������� #"� ������������.���+"#��+�#�"���#����"�#��#�#������ "��#"�����#���#"�� ��"�"�����#������������������� ��� "�"��#����#�����"�"#�#"�������5)2052��)�@�"����#�2 ���"���������7) :��9�����#����)2052�05)2������7) :� 9����#�"���#�����+���� � �����"���

������������#������ � �����"�����"����+�) :�������) :� ������� ��"#����������# ���"#�"��#������� ��� ��� �������"����#���"#��������#����������������#���������#���������"#����"#���� ��� ��� ������#��#�@�� �$�������#���������� �"#����#�#�������#� ��� �.�+���"#�������������"#����#�#�����=#� ��� ������#� ��� �O�$�������#�������#�#�"�������#" �"#������������ �"#����( ���"+������������ #"� ����������������� ����� #"� ��"#����������# ���"#��#������� ��� ��� ������

2�� � �����"����������� ��R�H��.�#�������." "#"��#������� #"� ����"���+���.�#���������������#������"�������"@����.�#�����"����+��;�"��� �6�#������"���7;6�9����"������"#�����#�����"+��#������.���+���" �. �������������������������#����#������#���.�#���������������"���+" �#����.�#���#�. ������.��"��#����.�#���/�.������/�.���#���������"����+�#������ "��#"������������#�����������"�����#"���� ��������������"��#����.�#���#�. �����#�"����#��#��#�#����#������#�������#��������.�#���/�.������������+���#�������#�. �������#��#"����(+#��#����#���������� �������#����#���#��"��#��#����.�#��/�.�

�����#���������� ���� "��#"���#��#���� � �����"�������#��������#����� � �����"�����"����������#���+���#���+� ��"���#�*3

� -��"��#��#�����="�������.���+�#��������.�#���/�.�#��#�#����#������������#�#�������#"����(��������"+��#����� ���

Manufacturing and Distribution Planning

2–22 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

;6���.�#��<"�"#?D��"��#���;6����#"����+�#���/���"�"�+" ���D������##�����="�������.���+�"�" ���.�#���/�.�

� ��#������ #"C#�������/�.�@����

) :�������) :� ������������"�����#"����D��.���+���.�#�����.�����#��2�� � �#�.�#��#�"��"��#������������������#�/�.����������#���5)2���#��>�����#�����.�#������ � ���"���#��#�������"+"�� ����"�����+���� � �����"���

�������3���������������������#��#����������#��������#����������"���+�5)2��#���#"���

����+� ��"�������"��" �#�#����� � �����"��3

CPU

Subsystem

OneWorld Server

BatchProgram

CPU

Subsystem

BatchProgram

CPU

Subsystem

BatchProgram

SubsystemTable

(F986113)

BatchProgram

(Preprocessing)

Submit ParallelProcessing Versionto the server

See Also

� ����������(���������&�� �' ��

� ����������(���������������������&�� �' ��

� !��"���#���(��!����'������� ��"��#���'���� �� ����������������+������"�+���#"����.��#���� � �����"��

Capacity Planning

Manufacturing and Distribution Planning

2–24 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

3–1OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Capacity Planning

;�������"#��2 ���"���#�������#��#��++"�"��#������"#��"����" �. ��#������� "��#���� �����������#"�������� �������#���.��5�#��2����#"�������� ��752�9���5�#�"� �)�@�"����#�2 ���"���75)29��-+��++"�"��#������"#��"��#����" �. ���#����������#�� #��#���� �����#��������"#��

����������������"#��2 ���"�������"��#���+� ��"����#��3

� )������)�@�"����#�2 ���"���7))29

� )�������#������"#��2 ���"���7)��29

� �����"#��)�@�"����#�2 ���"���7�)29

StrategicBusiness Plan

Resource RequirementsPlanningForecasting

Rough CutCapacityPlanning

MasterScheduling

Tactical Plan

Capacity RequirementsPlanning

Material RequirementsPlanning

)��2�"���#"+"�������"#�����#�"�#��#��"#"�� ���*����#��

�)2���#�����������" �. �������� ������@�"����#�������#������������@�"����#������#���.��5)2���)2�"��"��#�����#������������#���"��#�����#�"� ��@�"����#�� �����"������������

Manufacturing and Distribution Planning

3–2 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

��*����#�������"#��"�.����������" �. ������#��������������#��"#�"���#�"��#"���+�����52���5)2�����������1 ���5��������#����"���#�����#�� ����#��������������#��.�������#���@���#"#���@�"���

�����"#��2 ���"������"#��+�#���+� ��"���#�*3

� )��"��"�����*����#�

� ��#��"�"������" �. �������"#�

� 8����#"�����������+" �

� 8����#"����������@�"����#�� ��

� )��"��"����������@�"����#�� ��

� A� "��#"�����#������� �

� A� "��#"�����#�"� ��@�"����#�� ��

5���+��#�"�����#���#��"������#���#��������#"���� ���"�����#�. ����"

�����#������"#"��� �+�#�������������������������3�

� (��"#"��� �*" ��� �.�

� D�������"���

� D���+��" "#"�������"#"��� ��� ��#�#�

�������+����#"���"�#��� ��"�� �#�#"�����"�#�+������ ��"�����������@�"����#�� ����F�������"#�"�"���#��#�#������.��#��#�#���������+����#�"���#�#�����#�� �� ����.�#�#��#�"#�"��� ��"���#�"�#��#���� ����))2���"�������#"��#���+�#���#"�������������#��#����������#���������������#�

>��������#�����������@�"����#�� ����+#�����������#������ ���C#��+����#�.�#�.�+����������#���5�#�������� "��������������)�����)�@�"����#�2 ���"���7))29��#������#�����#��+�����+����#��+�+�#���� �#���#"��#��#���#"�������������#��#�����@�"���#�����#�#��������#"���� ���

3–3OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

))2������� �������� ��� ���C������ ���"���"���������3

� �=����"����="#"���+��" "#"�

� (�@�""�������+��" "#"�

� �#�++"��� ���

� ��#��"�"������"#� ��=����"#���+���@�"����#

))2����. ������#������#������������H�#�#��"��.�"���� ����"#����� "#"��#��#"�� �� ��������#��#"�� �� ��3

� -���#��"�������#����#���#�#��"��� ������������� ���"�����"G����+$�����#��#�� ����

� ( ���� ���"����#�#��������#�+��" �� ��� �����"�"�����#����#�" �#���#���#�#��"��� ��

� A� "��#��#�������#��������#�� �##���#��#���.�"���� ��

����)������)�@�"����#�2 ���"��������������#���������"#��� ���.��"#"�� ���*����#����������� ���C������ ���"���@��#"�������������#�*������������#������"#������#����@�"����#�#������#�#���� ��������*

����

Manufacturing and Distribution Planning

3–4 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

3–5OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Reviewing Work Centers

)��"���#�����*����#��"�+���#"���#��#���������#��#���+��" "#"������������+ ��������"+�����#���#�����*����#��"�����"��C��� �.�C������������#���"#�"����"#"�� ���*����#���>���� �����"+���#����� ����������#�������#��++"�"����������#" "G�#"����+�#�����*����#������#�������

>�������� ����"�#�"������� �"�+���#"����.��#�����*����#���"�� ��"��3

� 2�����"�#

� 2"��� ��������

� D��.���+�����"���������*�

� ����"G�

� 6��*+ ��� ���#"��

� )�#�

Before You Begin

� ��#��������#��*��������#��*�"#������������������� ���������� ������"��#����������������� ���������

� ��#����������*����#�������"��#����������.�"�����"#�����!��"���#����������������"��#�������������������������+

���%��''�� �������

1���#���2�"��"��)�����0�����"#��2 ���"��������78 �$9���������#�0���������*����#�+

$� �����*��"#����*����#��� ���#��#�����*����#��

�� ��������*����#������� "�*��� ��#�

Manufacturing and Distribution Planning

3–6 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

� �����*����#��5�#��)��""������"���#���+� ��"���+"� �3

� ��*����#�

� �"��#���8���

� <���#"���6����

� ��*����#������

� 2"���<���

� �"#"�� ��0�

� )�������++�#

:� � "�*�#��������"#��,���"+#�#�.�������"���#���+� ��"���+"� �3

� �#�����������"#�

� 6����

� �����"#��;�5

��"�"�#�����+�� #���"#��+����������)��"�����*����#��<����

� 5"�"���������"#�

� 5�="���������"#�

� F��

� ��"+#

Reviewing Work Centers

3–7OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

4� � "�*�#���F���,��++"�"�����#�.�������"���#���+� ��"���+"� �3

� E�����F��

� 5����F��

� )�� ����F�

� �++"�"����

� ;#" "G�#"��

����� /&��������

��*����#� -���#"+"����.�������� ��#�

D�#�3�>���������#�����.�����������#��"��#�"�+"� ��

�����#���"��#C/�#"+"��#����7+���=��� �����$�

��������S�S�S���$� 9��>��������#�"�@�"�����.�"��

��"#�+����"�����������������#��"#��

�"��#���8��� (���#��������������#���������*����#���"#�"����

���� �.�"�����"#��1���=��� ��������������#�"�����

#�������"�" ������"�������#"�����#��+����� ���*

���#��#��#����#�#������.�"�����"#�

<���#"���6���� (������#��#������#����"��C ��� �.�"�����"#��;��#�"

�����#���+��#����.�������� ��#�#��#��"��#�����

����#���#���/�.����"��������#� ���C ��� �.�"��

��"#���.��"��#��#��"#��1���=��� �3

� 6����02 ��#�755�;9� ���#�(�75�;9� ���#�6�75�;9� ��.�$� �75�;9

6�"�����"#����"#��"�.�������#����"���C ���

.�"�����"#�

��*����#������ (������#��#���+"���#���#�����+���*����#���A� "���� ��

���3

� �#����� ������*����#�

$ 2����#"��� "���"�������#"#"������"�����#

2"���<��� (������#��#���#��"���"+�����*����#��"�����"����

�.��"�#��"���������#���� ������"��� ���������"�

)������)�@�"����#�2 ���"������������"#�

)�@�"����#�2 ���"����� �� �#"���#������ ��� ���

��+" ��

A� "���������3

< )��� �.�������� �

5 5���"��������� �

6 )��� �.��� ���#��� �.�����

� 5���"���� ���#������

� �#���7�" ���#������#����������"#9

Manufacturing and Distribution Planning

3–8 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����� /&��������

�"#"�� ��0� (������#��#�"��"��#�����#���#�����*����#��"��"#"��

����#��"#"�� ������#����#����� �� �#�������"#���A� "�

�� �����3

D D�#����"#"�� ���*����#��

$ (��"#"�� ���*����#��"���� �� �#"���))2��� ��

� (��"#"�� ���*����#��"���� �� �#"���)��2����

�)2�

(��"#"�� ���*����#��"���� �� �#"���))2��)��2�

�����)2�������#���� ���"� �������� ���*

���#������������ ��#������$����������"�

#�"�+"� ��

: D�#��������"#����*����#��������#������

��#�"�� ����#�"���*����#��"�������"#�

� ���"���

D�#�3�������#��� ��#"���"����#���+��#���#��#������

��#�"��������+�"�+���#"����"#��#����)2�����)��2

������

)�������++�# (��� �������"��#���)������2�+" ��#�. ��71 � 9�#�

��#��"���#������.���+�����#��#�#�����#�� �����+��

��*����#����������� ��.���++�#�+���#���+����#��

�������#��

�#�����������"#� ����#�����������"#�� ��� ��#���"����������#"��� "��

��� ������#��

�����"#��"�#�#���"����"#��������

�����"#��;�5 (���"#��+�����������#���=���#��������"#���+��

�����#"��� "����+���=��� ���#���"����"�/��#"�������

�����

5"�"���������"#� ���� ���� "�"#������"#��.��������"���#��������#"��

"������ ����#�����#�����"��� ���"����"����.�

���������#��.�������+��#���������++"�"���"�����#�

���������

�����"#��"�#�#���"����"#��������

5�="���������"#� ��������� "�"#������"#��.��������"����������#"��� "��

�����#��������

�����"#��"�#�#���"����"#��������

6���� (������#��#������#���.�"�����"#����"�"#���"����

#�����"+��+�����"���.����0� ��#�#���� "��#������

���"�"����"+#�����+������*����#��

F�� �������.���+���*�����#��#�#�������+��#�"���� ��#

����#���������

Reviewing Work Centers

3–9OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����� /&��������

��"+# (������+"���������7��0�F9�#��#�"���#"+"����" ����*

�"+#��-������ ��#������������������"+#������#�����

�������#�����������#�#��#������ ���#�������#"������

1������ �����#"�����#�3

-+������� ������ ������*����"+#�+����"������"+#��#�

�"++���#"� �"���� "��. �����#��#��#��"+#���������#��

��� ����H���#�������������������#��#����"+#���

#������ ����H���#�����������������#������#����#�

#�����������#���#"�����������������#��#"���

-+������� ���������"��� ����*����"++���#��"+#�����

��#��#����"+#����������������� "��. ��#"������#�

���"���#�����+�� #��� ���

E�����F�� ����#�#� �����#��#��������"��=���#���#��.��"��@����

�#���*����#���������"���.�#�������*����#��

�����#���#���#�"��� ���"��#���-#���6�����#�. �

71:$��9��>��������� �� �#��#�"��� ����"���#���<���#"��

)� ���������������������#��"#������ �����������

���#���<���#"���)� ����������#����#������"��

����� ���#"���������� �#��#���#�. ���"#���� �� �#��

�� ���

5����F�� ����� ����������#��#�����@�"���#�������#������

+���#�"�����#"���#��#�����=#�����#"���"��#������

��*����#��

-+�#���)��#"���5�#���� ������. ��*��#����#��

�#"����#�����+�� #��� ���+���#�����*�������#"���

F�������#����#������#������ ����� ��+�

.��*����� "�����"�. �� ���#"���"#���

*�� ,������������� �����+++++++++++++ ++++++++++++++

-+����� �����#���F���+"� �����#���)��#"���)��""��

+���. ��*��#����#������#����� ���"��#�"�+"� ��+�

���#"������������ "����� �� �#"���

)�� ����F� ����#"����@�"���.�+����������"��� ���#"�������

�� ������#�*��.������" �. ��+���"#���� �"��� ���#"���

��"��� ���"������� ��+��*��.�����������"���"�

�����1 ���5��������#�

Manufacturing and Distribution Planning

3–10 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����� /&��������

�++"�"���� (������+"������ ���#��#�"��"��#�������++"�"��# ������*

���#������#�����"��� ������ ���+��#��#�++

�++"�"�����������������#������ ���"��#�"�+"� �������#��

5��"+����#�.����*����#���++"�"�����+"� ��"��#�����.

�����5���+��#�"������#��#�#�. ��71 ��%9�"��#�#��>�

#����#������#����������#���������#�76:9�+���#��

��#��� �� �#���+���#����"��#� �.����#�76$9�

1���=��� ���"+�#������#��#�"��#�#��>��#����� ����+�#�"

+"� ��"���Q������#����"��#� �.����#�"�$���#����#��

���#����6:���#���������#�+����"��#���-#�����#

��������#�(��C���#�. ��71 ���&9�

����)�+���)������;�"#�������� �����#�"��� ��

������+�� #�������� �� �#"����#��������"#��

��#�������#������ �����.���1���=��� �����#����Q

��������

D�#�3������#����=���#�#��#�#�����#"���#"�����#���

+�����������#�����#�����#�� �#"���"#�#�*��#������ �#�

�������#"�����++"�"�����������#��++��#�#�#� ���#�

�++"�"�����������"��������+�#�����#�"�#���"++���#

��#���������#���++"�"�����������#��������#������#"��

��.��*����� "����+�����*�����

;#" "G�#"�� (������#����#��#�"��"��#������"�#��"�� ������*����#�

"�.�"����������"��� ������ ���+��#������"�������-#

"�#����#"���+�#����"��#�#"����������+�������#"��

��#"�"#"��#��#���� ����������

����)�+���)������;�"#�������� �����#�"��� ��

������+�� #�������� �� �#"����#��������"#��

��#�������#������ �����.���1���=��� �����#����Q

��������

3–11OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Determining Available Capacity

>�����#���#��"�����������������#"��������"#��������*����#�������>�����#��"�������*����#�H����" �. �������"#��������"��������.����#�"����������"#��

>������������#����#��������#����������"#��������������#��#�������� ���;��#���8����#��)������;�"#�������#����#���#"�� ����� �� �#�#�����*����#������������#��������#����������"#��.�������������7F)9���"#��+��������)��"����"#������ ��"+����������#����*����/�#���#�

>��������"�����������"#�+���"++���#���"#��+�������"���"++���#���*���#���1���=��� ��������"��#����#�#���#"��#��#���@����+��#������������#��#���"#������� ���#��������������#������������"#���

�����#��"������" �. �������"#������� �#��#���+� ��"���#�*3

� 8����#����������"#���#���#"�� �

� )��"����������"#������ ��7��#"��� 9

Before You Begin

� A�"+��#��#���*����#���="#�+��� ���������"#�#��#�������#�����������#���!��"�������+

� ��#�����+�� #���"#��+�������"��#�������"�����#"���

Generating Resource Units Automatically

1���#���2�"��"��)�����0�����"#��2 ���"��������78 �$9��������)�+��)������;�"#�

)���#���)�+���)������;�"#�������#����#���#"�� ����� �� �#��#�����*���#�������>��������"���#����� #������#�0�������)������;�"#�

>������ �����#�"���������������������"��#�����������������#��5���+��#�"������#��#�+����#������.���+�����"���"������*����#�����#�����.���+���� ������"�����#������*����#���>�������� �����#��������#����+"�����������"#�+�����"+"��#"�����"���

Manufacturing and Distribution Planning

3–12 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

�����#������ �� �#��#�����������"#�+������*����#��.�������#��+� ��"���"�+���#"��3

� F����������"��#�����*����#��5�#��#�. ��71 ��&9

� �����+ ����� ����

� 5���+��#�"������#��#�#�. �

"������3�(�������� ��������#��#�������*��#��#�����"#������#�0������)������;�"#��" �.������"##���������������)�+���)������;�"#�

Resource Unit Calculations

�������������#���+� ��"�����������"#��� �� �#"��3

,�������������������

�������������>���,�

D��.���+�����"���P���*�����������

9�����������������

�������������>9��.�

D��.���+���� �����P���*�����������

Before You Begin

� ��#��������+��#�"������#��#������'�������������������'���� �+

� ��#��"���#���.����0� ��#�+����"����������#�#�������#���������"#�

� A�"+��#��#�������#������� �����+��#���#"�����"����������"+��"��#���

Processing Options for Refresh Resource Units

Defaults Tab

���������"�����#"�����+"�����+�� #��� ���

1. From Date

;��#�"�����"�����#"���#�����"+��#���.��"��"�����#��#��#�#����#���������������#"�����������"#����#��#���.��"��"�����#����� ��#�����#��+��#����� �����������#����@�"��#�"�����"�����#"���.�+��������������#�������#"���

Determining Available Capacity

3–13OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

2. Thru Date

;��#�"�����"�����#"���#�����"+��#������"�����#��#��#�#����#���������������#"�����������"#����#��#������"�����#����� ��#�����#��+���#���� �����������#����@�"��#�"�����"�����#"���.�+��������������#�������#"���

3. Branch/Plant

;��#�"�����"�����#"���#�����"+��#���.����0� ��#�����#���.��#����#���"�#�����*����#��)������;�"#�#�. ����������������#����������"#����#�#���.����0� ��#���� ��#���.����0� ��#�+���#���6�"���;�"#�5�#�������+������"�����"�����#"���"��@�"���.�+��������������#��������#"���

Process Tab

���������"�����#"�����+"�������"����"#�"��

1. Shift Code

(������+"���������7�&0�F9�#��#�"���#"+"��#���#�����+��"+#��1���=��� ��������"��#������������

���������"�����#"������"+��#����"+#������#��.��"�� �����"��#����������"#������#"����>���������#�����#��"=��"++���#��"+#���������#��#���������� ��#�"#�+���#����� ��#�;����+"��������+����-+����� ������ ��"+#�����. ��*��#����#���������� ��� "���"+#�+��#����@��#���.����0� ��#�

2. Shift 2 Code

(������+"���������7�&0�F9�#��#�"���#"+"��#���#�����+��"+#��1���=��� ��������"��#������������

���������"�����#"������"+��#����"+#������#��.��"�� �����"��#����������"#������#"����>���������#�����#��"=��"++���#��"+#���������#��#���������� ��#�"#�+���#����� ��#�;����+"��������+����-+����� ������ ��"+#�����. ��*��#����#���������� ��� "���"+#�+��#����@��#���.����0� ��#�

3. Shift 3 Code

(������+"���������7�&0�F9�#��#�"���#"+"��#���#�����+��"+#��1���=��� ��������"��#������������

���������"�����#"������"+��#����"+#������#��.��"�� �����"��#����������"#������#"����>���������#�����#��"=��"++���#��"+#���������#��#���������� ��#�"#�+���#����� ��#�;����+"��������+����-+����� ������ ��"+#�����. ��*��#����#���������� ��� "���"+#�+��#����@��#���.����0� ��#�

Manufacturing and Distribution Planning

3–14 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

4. Shift 4 Code

(������+"���������7�&0�F9�#��#�"���#"+"��#���#�����+��"+#��1���=��� ��������"��#������������

���������"�����#"������"+��#����"+#������#��.��"�� �����"��#����������"#������#"����>���������#�����#��"=��"++���#��"+#���������#��#���������� ��#�"#�+���#����� ��#�;����+"��������+����-+����� ������ ��"+#�����. ��*��#����#���������� ��� "���"+#�+��#����@��#���.����0� ��#�

5. Shift 5 Code

(������+"���������7�&0�F9�#��#�"���#"+"��#���#�����+��"+#��1���=��� ��������"��#������������

���������"�����#"������"+��#����"+#������#��.��"�� �����"��#����������"#������#"����>���������#�����#��"=��"++���#��"+#���������#��#���������� ��#�"#�+���#����� ��#�;����+"��������+����-+����� ������ ��"+#�����. ��*��#����#���������� ��� "���"+#�+��#����@��#���.����0� ��#�

6. Shift 6 Code

(������+"���������7�&0�F9�#��#�"���#"+"��#���#�����+��"+#��1���=��� ��������"��#������������

���������"�����#"������"+��#����"+#������#��.��"�� �����"��#����������"#������#"����>���������#�����#��"=��"++���#��"+#���������#��#���������� ��#�"#�+���#����� ��#�;����+"��������+����-+����� ������ ��"+#�����. ��*��#����#���������� ��� "���"+#�+��#����@��#���.����0� ��#�

Revising Resource Units Manually

>���������"����������"#������ ��"+����������#����*����/�#���#�#�#�����1���=��� ��������"��#������#����*����/�#���#�#��������#�+�����"�������#"�������� ���������#"����>��������������#����� ������#����#�0�������)������;�"#�+���#��������#�+������� ������������ ������#"�������"#"��� ��"+#��������#"���#"���

"������3������#"����������)�+���)������;�"#��#������������ �� �#�#���+����� �����������"#����������� ���������.�������"�+���#"���"�#�����*����#��5�#��#�. ��71 ��&9��#��������1 ����� ���������������#���5���+��#�"������#��#�#�. ��71 ��%9�

Determining Available Capacity

3–15OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

���%������������������������

1���#���2�"��"��)�����0�����"#��2 ���"��������78 �$9���������#�0�������)������;�"#�

$� �����*��"#��)������;�"#������ �#��#���+� ��"���+"� �3

� ��*����#�

� 6����02 ��#

�� ���� �#��#���+� ��"�����#"��� �+"� ������� "�*�1"��3

� 5��#�

� >��

� )��"���#���+� ��"���+"� �3

� ;�"#��+�5����

� ��*����#���++"�"����

� ��*����#��;#" "G�#"��

:� ������#��������+����"����������#�#����"����������"#������ "�*�� ��#�

4� �����*����#��)������;�"#�)��""�������� �#��#���+� ��"���+"� ��+����������"��#�������+ ����� ����3

� )������;�"#���*��$

��#��#������.���+���"#����" �. ��"��#��#���*����#��#��#�����.�������#�����"#��+��������1���=��� ���"+�#�����"#��+������

Manufacturing and Distribution Planning

3–16 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

"�����7F)9����#��#������.���+��������" �. ��"��#��#���*���#��#��#�����

����� /&��������

6����02 ��# (������#��#������#����"��C ��� �.�"�����"#��;��#�"

�����#���+��#����.�������� ��#�#��#��"��#�����

����#���#���/�.����"��������#� ���C ��� �.�"��

��"#���.��"��#��#��"#��1���=��� �3

� 6����02 ��#�755�;9� ���#�(�75�;9� ���#�6�75�;9� ��.�$� �75�;9

6�"�����"#����"#��"�.�������#����"���C ���

.�"�����"#�

��*����#� -���#"+"����.�������� ��#�

D�#�3�>���������#�����.�����������#��"��#�"�+"� ��

�����#���"��#C/�#"+"��#����7+���=��� �����$�

��������S�S�S���$� 9��>��������#�"�@�"�����.�"��

��"#�+����"�����������������#��"#��

��*����#���++"�"���� (������+"������ ���#��#�"��"��#�������++"�"��# ������*

���#������#�����"��� ������ ���+��#��#�++

�++"�"�����������������#������ ���"��#�"�+"� �������#��

5��"+����#�.����*����#���++"�"�����+"� ��"��#�����.

�����5���+��#�"������#��#�#�. ��71 ��%9�"��#�#��>�

#����#������#����������#���������#�76:9�+���#��

��#��� �� �#���+���#����"��#� �.����#�76$9�

1���=��� ���"+�#������#��#�"��#�#��>��#����� ����+�#�"

+"� ��"���Q������#����"��#� �.����#�"�$���#����#��

���#����6:���#���������#�+����"��#���-#�����#

��������#�(��C���#�. ��71 ���&9�

����)�+���)������;�"#�������� �����#�"��� ��

������+�� #�������� �� �#"����#��������"#��

��#�������#������ �����.���1���=��� �����#����Q

��������

D�#�3������#����=���#�#��#�#�����#"���#"�����#���

+�����������#�����#�����#�� �#"���"#�#�*��#������ �#�

�������#"�����++"�"�����������#��++��#�#�#� ���#�

�++"�"�����������"��������+�#�����#�"�#���"++���#

��#���������#���++"�"�����������#��������#������#"��

��.��*����� "����+�����*�����

5��#� ������ ��������#��+��#�"��� �����

>�� ������ ���������+��#�"��� ������

Determining Available Capacity

3–17OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����� /&��������

;5 (������+"���������7��0;59�#��#�"���#"+"��#�����"#��+

��������#�+����������#���@���#"#���1���=��� ���"#

���������#���.�� ��.�=����."����#��� "#�����������

�����

��*����#��;#" "G�#"�� (������#����#��#�"��"��#������"�#��"�� ������*����#�

"�.�"����������"��� ������ ���+��#������"�������-#

"�#����#"���+�#����"��#�#"����������+�������#"��

��#"�"#"��#��#���� ����������

����)�+���)������;�"#�������� �����#�"��� ��

������+�� #�������� �� �#"����#��������"#��

��#�������#������ �����.���1���=��� �����#����Q

��������

Processing Options for Work Center Resource Units

Defaults

1. Enter the Default Unit of Measure for Work Center Resource Units. If left blank, HR will be used as the default Unit of Measure.

Unit of Measure as Input ____________ Work Day Calender (P00071) ____________

Manufacturing and Distribution Planning

3–18 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

3–19OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Generating Resource Profiles

<���C����� ����"�����#"��#���+���������� ������������@�"���#�����#� ����/��#"���������#��"��� ���C����� �����#����#�������������+" ���������������+" ��"��� "#��+�� ���*����#������#��"� ����@�"����#�+������#�C����� ���"#����������������+" ��"�#�������+�� �.�������"���������#��������@�"���+��� ���*����#������+��� ���#"��#����� #" ��� �." ��+���#�"� �+������#�C����� ���"#���

>������������#����#�����#���#"�� �������#������������+" ����������������� ����#��#�����+" ��

���� �#��#���+� ��"���#�*3

� 8����#����������+" ����#���#"�� �

� ��+"�����������+" ������� �

Generating Resource Profiles Automatically

1���#���2�"��"��)�����0�����"#��2 ���"��������78 �$9��������8����#�)������2�+" ��

-+������������+"����." ��+���#�"� �76�59�������#"���+���������"#������� ��+�"#��.���. "��������������8����#��)������2�+" ��#����#���#"�� ������#��#�����������+" ��������������� �� �#��#��� �����������*����#�.���=#���"���#�������"��#�����#"���.��#���+����#���@���#"#"��+��#����#�C����� ���"#���

����8����#��)������2�+" �����������#����"#��+��������� ��"�����7F)9����#��#�����������+" ������� ��"+��������#�#������#�����"#��+������

Manufacturing and Distribution Planning

3–20 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

8����#��)������2�+" ���������������#��#�����������+" ���"����������#��"#���++��#"�"#����#���"#�"��#�����"���#��#��������"+���������"+"��"#����++��#���.��#��������������#��"����.��#���+� ��"���+��#�3

� �����#����#"������#"����� ��+��6�5���������#�#��#�����++��#"���"#�"��#���������+��++��#"�"#����#��"��#�������"�����#"���+��#��������#"���

� �����#������#����������+" ���� ��+���6�5���������#��"#��++��#"�"#����#��#��#�����"#�"��#����++��#"�"#����#���"�����#��#���"#������#�������"�����#"���

� �����++��#"���1�����#��"��#�����������+" ��"�#��� �#�#��+�#�����#��"�#�������"�����#"����#���6�5����#�����#"����++��#"���1�����#��

� �����++��#"������������#��+����������+" ��"�#����� "�#��+�#�����#�"��#�������"�����#"����#���6�5����#�����#"����++��#"�����������#��

����+� ��"�������"��" �#�#��� �#���6�5�������#"����"#���++��#"�"#����#�#��#�����"#�"��#����++��#"���1��������++��#"������������#���

Regeneration Effectivity Dates:4/01 – 10/31

BOMComponent 1:

1/1 – 2/28

BOMComponent 2:

3/1 – 11/30

BOMComponent 3:

2/1 – 8/15

Operation Sequence 1 Operation Sequence 2

Included in generation

1/1 1/31 2/28 3/31 4/30 5/31 6/30 7/31 8/31 9/30 10/31 11/30 12/31

Generating Resource Profiles

3–21OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Before You Begin

� ��#��� ���� "��. ��." ��+���#�"� ����#"����������*����#�������#��+� ��"���#��"��"��#����������&�������� ��������-

� !��"���#�����������������

� !��"���#�����������

� !��"���#���!��"�������

Processing Options for Resource Profile Regeneration

Process

1. Enter the effectivity dates for the regeneration:

Effective From: ____________ Effective Thru: ____________

Defining Resource Profiles Manually

>�������� ����#��#�����+" ��"+������������#���+"����." ��+���#�"� ������#"���+���������"#����>�������� �����#�������� ���#����+����#�#���"#����������������#�

Before You Begin

� ��#��"#���.����0� ��#�"�+���#"���������������������� ���������� ������"��#����������������� ��������+

������������������������������

1���#���2�"��"��)�����0�����"#��2 ���"��������78 �$9���������#�0�������)������2�+" ��

$� �����*��"#��)������2�+" ��)��""�������� �#��#���+� ��"���+"� �3

� -#���D��.�

� 6����02 ��#

�� ���� �#��#���+� ��"�����#"��� �+"� ������� "�*�1"��3

� �*"��#����*����#�

� ;�"#�����

� ������#��������+����"����������#�#����+"�������������+" ������ "�*��� ��#����� "�*�(���#����#����������������+" ��

Manufacturing and Distribution Planning

3–22 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

:� ���)������2�+" ��)��""�������� �#��#���+� ��"���+"� ������� "�*�T3�

� �++��#"���1��

� �++��#"������

� ;�"#�����

� �"���6�"

����� /&��������

�++��#"���1�� (���#��#��#�"��"��#�������+�#���+� ��"��3

� ���������������#���#�����"�#���++��#������." �+���#�"�

� ���������#"���#�������"�#���++��#�����@���������#�����#"���+�����"#��

� ��������#������� ��"�"���++��#

������+�� #�"�#�������#��#�����#���>���������#�

+�#����++��#"�����#����#��#�#����#���� ���+�

�����"�����������-#���#��#������� ������++��#"���"�

#���+�#�������#" �.������������������"G���"��2����#

��#"���������1 ���5��������#�����������"#�

)�@�"����#�2 ���"��������5�#�"� �)�@�"����#

2 ���"����#�����#��"����� "����������#�.�

�++��#"�"#����#�����#�.��#���." ��+���#�"� ���""��� ��� �

�����+����"� �����#��.�������#����++��#"�"#����#�

������#��

Generating Resource Profiles

3–23OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����� /&��������

�++��#"������ (���#��#��#�"��"��#�������+�#���+� ��"��3

� ���������������#���#�"���� �����"���++��#�����." ��+���#�"�

� ���������#"���#���"���� �����"���++��#�����@���������#�����#"���+�����"#��

� ��������#������� ��"���� �������#"��

������+�� #�"������.�� $��+�#�����+�� #�������+"����"�

#�����#���"�#"�����+�����#����������>����>������

��#��+�#����++��#"�����#����#��#�#����#���� ���+�

�����"�����������-#���#��#������� ������++��#"���"�

#���+�#�������#" �.������������������"G���"��2����#

��#"���������1 ���5��������#�����������"#�

)�@�"����#�2 ���"��������5�#�"� �)�@�"����#

2 ���"����#�����#��"����� "����������#�.�

�++��#"�"#����#�����#�.��#���." ��+���#�"� ���""��� ��� �

�����+����"� �����#��.�������#����++��#"�"#����#�

������#��

;�"#����� (������#��#�"��"��#��#���#�����+���������"#����"�#��

�"#��#�"���*����#���2�". ��#������3

$ )���<�.��F��

� ��#���<�.��F��

5���"���F��

% 5"�� ������7�#��������������������9

�"���6�" (������+"���������7 �0�69�#��#�"��"��#����������"��

�� �.����������=�����+���������#���"���.�"

�����"���#"+��#���#"���.�"����#��#��.������+�

����"����� �.��������#����+���������#"���#���

1���=��� ����4��������$������"������$4�������

$�������"�����>���������"�#�"��#���#"���.�"������"�

�"���6�"������

�����#������#����� ���"��#������"�#"��C��+"� ����

#���;����+"���������+���+����#"������������ "��

�� �� �#"�����������"�#"���"����#�#�������������#�

.�#�"���#�����"���� �� �#"���

Manufacturing and Distribution Planning

3–24 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

3–25OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Generating Resource Requirements Plans

1���#���2�"��"��)�����0�����"#��2 ���"��������78 �$9��������)�����)�@�"����#�2 ���"���

(+#�������������#������������"#�������������+" ����������#��������#��#������#��#����������@�"����#�� ��������� ������#�"� ���C������#"��#���+�#��������"#��������#�������*����#�������������"��#�"�� ���3�

� �������.���+������#"���#�++�#��#����������#���"������#�����#�+�#�������#"�������

� �������.���+����"#"��� �����"���#��#������" ������+�������������# "��

� ������ ��#�#��#��#������" ������#��.���+�����"#"��� �+��" "#"�

6�������������#���+����#�"��� �����+���*�����+�� ���C������ ���"���#�����#��#��#�#�"����������#��"�����#"��#���+������"#�������.�������#��+����#��������������+" ���++�#��@�"�����#��+�������"#��

����#�����+���#��#��#������������#��"�� ���3

� ���C�����"#��������C�����"#�������

� 2�"�������"���.��#���*����#�

� D��� ������+" ��"�+���#"���.�������#���#�����+���*����#�� ���3

� )�#�����+" ��"�#������" �. ����"#�+"����+���#���)������;�"##�. ��71 ��!9

� <��������+" ��"�#���+����#��� ������"����+���#�����#�� ������"#��H�+����#�����#��"���������+" �

� 2����#�����������"�#��� ��������+" ���"�"����.��#����#����+" �

� )���������" �. ��"�#����#�����+" ���"���#��� ��������+" �

� (����� �#������������" �. ��"������"���#�#� ��+�#�����������" �. �

Manufacturing and Distribution Planning

3–26 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����������#����#�����"���+��� ���"��������������@�"����#����������#����#��"�����#��� ��#"���+��#���+� ��"��3

"�� ��������������� >���������*�������+�#���+� ��"�����*����"��3

D 2������ ������"#"�� ���*����#�

$ 2�����"#"�� ���*����#��"���� �� �#"��

�������@�"����#�� ����� �

� 2�����"#"�� ���*����#��"���� �� �#"��

�����"#���@�"����#�� ����� �

2�����"#"�� ���*����#��"���� �� �#"��

�������@�"����#�� ������������"#�

�@�"����#�� ��

: D�#��������"#����*����#��7�" ���#�.�

�������"��#��������"#��)�@�"����#

2 ���"����#��9

.�����3�������

�����������

>�������� ��#�#���+� ��"���+��� ���"���+��" "#"�����

�"��#�������3

� (����"+"��� ���"���+��" "#����#����"��#���������.�#�

� (�������+�� ���"���+��" "#"����#����"��#��������"���#���)(D8����<-����� �����.�#�

Before You Begin

� A�"+��#��#���������"#��="#�+��� ���*����#��"������+��" "#������&���� ����������������������+

� A�"+��#��#���������+" ���="#�+��� ���#�C����� ���"#���������������������������������+

� A�"+��#��#�#�����������+" ��"��#�����"#��#��������"�#����"#��+�������>��������������="�����+�+"�����"#��+�������������������������������������+

� ���#������#�" �+����#�+��#�����#�C����� ���"#����"���#����#�0�������1����#������������!��"���#���&�����*���������"��#��*���������������+

� ��#��"�����"���+����#�#�����������#�#�����"��#��������#"����>�������������="�����+�+"��������'��������'� ���*���������"��#��*���������������+

� ��#����#�������+ ����� �����+��� �������#"�����"���+����"���������#�#�������#���������@�"����#�� ��������'������������������������� ������"��#���'���*��������� ��������+

Generating Resource Requirements Plans

3–27OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

See Also

� �����#�������������.���� ����������+��"�+���#"������#����� #��+#�����#��#�+��������#"���)������)�@�"����#�2 ��

Processing Options for Resource Requirements Planning (R3380)

Bucket Information Tab

���������"�����#"���� �������#�����"+��#���������#"���#�#���#���#��� ���"�����"G�����"��������#�����#�������"���"����� ���"��������

1. Regeneration Start Date

;��#�"�����"�����#"���#�����"+��#�����#��#��#�#������������#��#�#�#��� ���"�����������"���#��"�� ��#���.��"��"����+�#���� ���"�����"G����-+���� �����#�"���#"���. ��*��#����#������#����#�����#��

2. Planning Horizon Periods

Planning Weeks

;��#�"�����"�����#"���#�����"+��#������.���+����*�#��#�#����#��"��"��#��"����� ���"�����"����1���=��� ��������#����#����"� ���#����"����"��������72 :$ 9��#����#���� ����������#��+��#������.���+� ���"������*�

Number of Months

;��#�"�����"�����#"���#�����"+��#������.���+����#��#��#�#����#��"��"��#��"����� ���"�����"����1���=��� ��������#����#����"� ���#���"�����"��������72 :$ 9��#����#���� �����������#� ����#��+��#�����.���+�� ���"������#��

3. Past Due Periods

;��#�"�����"�����#"���#���"� ���#������.���+���#�������"���#��#�#���#��������#��+���� ��������+" ���������� ��������#�#������.���+��#�������"���+��#��������H������#"�����#���A� "���� �����3

� ����"���7��+�� #9$ ������#�������"��� #�����#�������"��

Manufacturing and Distribution Planning

3–28 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Process Tab

���������"�����#"���� �������#�����"+��#���.�����#��#����#������+�#����)20)��2�2 ���"���)������#"���������7) ��9�����#��������#����+������#�����������#��������"#���(��"#"��� ���������#��"������#���������#���*����#��#��.��� ������.���"��#��������"��#���� ���"���

1. Branch

;��#�"�����"�����#"���#�����"+��#���.�����#��#�#����#������+��#���)20)��2�2 ���"���)������#"���������7) ��9�

2. Under Rated Capacity Percent

;��#�"�����"�����#"���#�����"+��#��������#������#����#��������"#��#��##����#������#����#��"������#�������*���#��"����� ������������#���"� ����������"#����#�#���+�;�7����9�+�������"#�� ����#��#���� ��#���#���"���#"+"��������#���������#����#����� ���

1���=��� ���"+�#����#��������"#��"�$�����"#�����#��������#��������"#��"��##��4Q��#����#����#���#" ����"����������"#�� �����+�%4���"#������� "�� ����#�����*����#����"�" � ���#����#������ �����"����������"#�� �����+�%:��"#���������� ����

3. Over Rated Capacity Percent

;��#�"�����"�����#"���#�����"+��#��������#�����#����#��������"#��#��#�#���#������#����#��"������#�������*����#��"���� ������������#���"� ����������"#����#�#���+���7���9�+��#��������"#�� ����#��#�"����#�#����#���"���#"+"��������#��������#����#����� ���

1���=��� ���"+�#����#��������"#��"�$�����"#�����#�������#��������"#��"��##��4Q��#����#����#������ ��#" ����"����������"#�� �����+�$�4������� "� �����#�����*����#����"�" � ���#����#������ �����"����������"#�� �����+$�&���"#��������� ����

4. Roll Up to Dispatch Group

;��#�"�����"�����#"���#�����"+�����#����� #"� ����*����#���"#�"����"��#��������� ����#��#��#��"��#��������+����"����A� "���� �����3

6 ��* �����#���������#�� ������*����#��#�����"��#��������$ �����#���� ������*����#��#�����"��#��������

Forecast Types Tab

���������"�����#"���� �������#�����"+��#���+����#�#����#��#�#����#�������������"#����#���)������)�@�"����#�2 ���"���������7) ��9�

Generating Resource Requirements Plans

3–29OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

>���������#�����#��+"���+����#�#����"��#����#����1����#�#��������C��+"��������#����"��#�����#�" �1����#�#�. ��71 :&�9�

1. Forecast Type 1

;��#�"�����"�����#"���#�����"+��#���+����#�#����#��#�#����#��������������������#���)������)�@�"����#�2 ���"���������7) ��9��1����##���������C��+"�����������#����"��#�����#�" �1����#�#�. ��71 :&�9�

2. Forecast Type 2

;��#�"�����"�����#"���#�����"+��#���+����#�#����#��#�#����#��������������������#���)������)�@�"����#�2 ���"���������7) ��9��1����##���������C��+"�����������#����"��#�����#�" �1����#�#�. ��71 :&�9�

3. Forecast Type 3

;��#�"�����"�����#"���#�����"+��#���+����#�#����#��#�#����#��������������������#���)������)�@�"����#�2 ���"���������7) ��9��1����##������������+"�����������#����"��#�����#�" �1����#���. ��71 :&�9�

4. Forecast Type 4

;��#�"�����"�����#"���#�����"+��#���+����#�#����#��#�#����#��������������������#���)������)�@�"����#�2 ���"���������7) ��9��1����##���������C��+"�����������#����"��#�����#�" �1����#�#�. ��71 :&�9�

5. Forecast 5

;��#�"�����"�����#"���#�����"+��#���+����#�#����#��#�#����#��������������������#���)������)�@�"����#�2 ���"���������7) ��9��1����##���������C��+"�����������#����"��#�����#�" �1����#�#�. ��71 :&�9�

Unit of Measure Tab

���������"�����#"���� �������#�����"+��#�����"#��+�������#��#�#���#���������������������#���)������)�@�"����#�2 ���"��������7) ��9�������#���������������#��+"�����"#��+��������#���#"���

1. Unit of Measure 1

;��#�"�����"�����#"���#�����"+��#�����"#��+�������#��#�#����#��������������������#���)������)�@�"����#�2 ���"���������7) ��9�

Manufacturing and Distribution Planning

3–30 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

2. Unit of Measure 2

;��#�"�����"�����#"���#�����"+��#�����"#��+�������#��#�#����#���������������#���)������)�@�"����#�2 ���"���������7) ��9�

3. Unit of Measure 3

;��#�"�����"�����#"���#�����"+��#�����"#��+�������#��#�#����#��������������������#���)������)�@�"����#�2 ���"���������7) ��9�

4. Unit of Measure 4

;��#�"�����"�����#"���#�����"+��#�����"#��+�������#��#�#����#��������������������#���)������)�@�"����#�2 ���"���������7) ��9�

5. Unit of Measure 5

;��#�"�����"�����#"���#�����"+��#�����"#��+�������#��#�#����#��������������������#���)������)�@�"����#�2 ���"���7) ��9�

3–31OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Reviewing Resource Requirements Plans

��������������#�����������@�"����#�� ����#����#������#����#"���"��#��#�����#��� ������"��������� ���"�����"���+������*����#���-+��������"G������ ���*����#�������"��#�������������"���#��������+���#"����"�" ������#"������#���"������#"�������������"���#��������#��������#��������#"���� ����++��#������"#���+�#�����*����#�����������

�����"����������@�"����#�� �������� �#��#���+� ��"���#�*3

� )��"����"��#��������+��))2

� )��"�����*����#�� ����+��))2

� )��"�����"�������"�

� )��"�����������#�"

� A� "��#���������@�"����#�� ��

>���������"�������"���+��������"���#����#��"���#��� ����#��#�"�� �����������*����#��.�������"#����������>�������� ����"���������+��������*����#�������� �#���� ������#����� ��������

-+�#����#���������#�����C�����"#��������C�����"#������"#"�������������"���#���� �������"���#"+��#�����"�������*����#��"����"���#������"#"���������-#��"��#�.���������#����/�#�#���+����#��������"#������#������#��#����������@�"����#�� ������"��

Reviewing Dispatch Groups for RRP

-+����� ���*����#���������"G��������"��#�������������������"���#�������#����#��"������������"#���++��#�� ��+�#�����*����#��"��#���������"��#�����������. ������#������"G����*����#�������"���#��������+���#"����"�" ������#"������#���"������#"����

�����������"����"��#������������������ ����"����������.��#�� �#����*����#��"��#���������������#��#�"�+���#"���#����"#".�#��#��� ����"#�"��#��������

Manufacturing and Distribution Planning

3–32 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

���%��'������������

1���#�����" ��)������)�@�"����#�2 ���"��������78 $$9��������)��"���"��#���8����

$� �����*��"#�������"#��5����������������� �#��#���+� ��"���+"� �3

� �"��#���8���

�� ���� �#��#���+� ��"�����#"��� �+"� ������� "�*�1"��3

� �"#"�� ��0�

� 5���������

� ;05

� )��"���#���+� ��"���+"� �3

� ��##���"���5����

����� /&��������

�"��#���8��� (���#��������������#���������*����#���"#�"����

���� �.�"�����"#��1���=��� ��������������#�"�����

#�������"�" ������"�������#"�����#��+����� ���*

���#��#��#����#�#������.�"�����"#�

Reviewing Resource Requirements Plans

3–33OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����� /&��������

�"#"�� ��0� (������#��#�"��"��#�����#���#�����*����#��"��"#"��

����#��"#"�� ������#����#����� �� �#�������"#���A� "�

�� �����3

D D�#����"#"�� ���*����#��

$ (��"#"�� ���*����#��"���� �� �#"���))2��� ��

� (��"#"�� ���*����#��"���� �� �#"���)��2����

�)2�

(��"#"�� ���*����#��"���� �� �#"���))2��)��2�

�����)2�������#���� ���"� �������� ���*

���#������������ ��#������$����������"�

#�"�+"� ��

: D�#��������"#����*����#��������#������

��#�"�� ����#�"���*����#��"�������"#�

� ���"���

D�#�3�������#��� ��#"���"����#���+��#���#��#������

��#�"��������+�"�+���#"����"#��#����)2�����)��2

������

5��������� (������#��#��"#"���"����"++���#�������#��#���

�����#���"��#��������"#��2 ���"����#����A� "������

��3

( ���"��������

5 5���� ������

� ���������"#�

; ;���������"#�

;05 (������+"���������7��0;59�#��#�"��"��#��#���@���#"#�

"����"���#���=������"����#���"#����+���=��� �����

7���9���6R�7.�=9�

��##���"���5���� (�."�+����"�#"����+����"#�������*�����=� ���#"���

*�� ,������������� �����+++++++++++++ ++++++++++++++

(��������+�#�����#�" ���������+��#�����*����#��

1���=��� ���"+�#�����*����#�����+�������C�����"#�

������7������#����;9��#�"�+"� ���"� ���;;;;�

Manufacturing and Distribution Planning

3–34 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Processing Options for Capacity Message Summary

Defaults

1. Enter the Critical Work Center ____________ Code to be displayed or blank for all Work Centers. 2. Enter the Capacity Mode: ____________ ’1’ = Resource Requirements ’2’ = Rough Cut Capacity ’3’ = Capacity Requirements 3. Enter the default Unit of ____________ Measure.

Versions

Enter the version for each program. If left blank, version ZJDE0001 will be used.

Work Center Revision (P3006) ____________

Reviewing Work Center Load for RRP

����))2����������"���������"�� �.��*������.��� ���"�����"�����+�#�������"#�� ����� ������������*����#���;��#�"�"�+���#"���#����#��"�����#���#����/�#������"#����#���+����#��

���������"��#���2"���<����+"� �������*����#��5�#��)��""�����#��"��#���#�����+� �����1���=��� ���"+�������#������"��������#���������#���"��� ����������#������.��#��#��������"++��+���#����#��#�������"+������#������"��������� ��

�� �� �#"���+��#���#�����+� ������3

*���������� ���������#��+������"#�����" �. ��+������*����#��

9����������� ���������"#��#��#�"��@�"���#�����#�#���+����#�

<��������+" ��?�7+����#�@���#"#��P� �.��������"��

���9�0�7�++"�"�����P��#" "G�#"��9�P�#"���.�"�����

������������������� ���� ��������+" ���"�"����.��#����#�����+" ��

*��������%������� �����#�����+" ���"���#��� ��������+" ��

��������������������

�%�������

(����"���#�#� ��+����������" �. ��

Reviewing Resource Requirements Plans

3–35OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

�����#����#����� �� �#��#����������"#�"��++�#�.��#���)�������++�#��� ��+���#���)������2�+" ��71 � 9�#�. �������)�������++�#��� �����#��"��#������.���+�����#��#�#�����#�� �����+�����*����#����������� ��.��++�#�+���#���+����#���������

Before You Begin

� 8����#��#���))2��"#��� ���������#���������"#������#� ���#����

���%��''�� �������������**�

1���#�����" ��)������)�@�"����#�2 ���"��������78 $$9��������)��"����*����#��<����

$� ���)��"�����*����#��<��������� �#��#���+� ��"���+"� ������� "�*1"��3

� ��*����#�

�� ���� �#��#���+� ��"�����#"��� �+"� ������� "�*�1"��3

� �#�#���#�

� ;�"#��+�5����

� )��"���#���+� ��"���+"� �3

� ���"�#"��

Manufacturing and Distribution Planning

3–36 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����� /&��������

���"�#"�� (������+"��������������*�

*�� ,������������� �����+++++++++++++ ++++++++++++++

-��#���������������"�#"����+�#����"��� ���������+�

#�����*����#���-��#�����#�" �����������"�#"����+�#��

*"����+���#��#��#�������"��#��#����

Processing Options for Capacity Load

Defaults

1. Enter the Capacity Mode: ____________ ’1’ = Resource Requirements ’2’ = Rough Cut Capacity ’3’ = Capacity Requirements 2. Enter the User Defined Code for ____________ the list of row descriptions to appear. 3. Enter the default Unit of ____________ Measure. 4. Enter the version of the ____________ Dispatch List program to call. The default is ZJDE0001.

Versions

Enter the version for each program. If left blank, version ZJDE0001 will be used.

Operation Dispatch Inquiry ____________ (P31220)

Reviewing Period Summaries

-�����"#"���#����"��"���#��������"#�� �����+�����*����#������������ ���� ��#��#��� ����#��#�"�� ������������*����#������ ��#��#��� ����.����"������.��"#����>���������"��3�

� ����"#���#��#��������� ���+������*����#��

� �������.���+���"#��+����"#���#��#���*�����#��� ����

� ���������#��+�#���#�#� � �������#�����*����#��#��#�"�+�������"+"�"#��H�+����#�������#�������"G��#��� ����.��#�����"����"���#����"#��+�������#��#��������"+��

>������#�"�"�+���#"���#����#��"������#���#����/�#�#���+����#���#�������"#���#�#�����*����#��

Reviewing Resource Requirements Plans

3–37OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

���%��'��������������

1���#�����" ��)������)�@�"����#�2 ���"��������78 $$9��������)��"��2�"����������

$� �����*��"#��2�"����������)��"�������� �#��#���+� ��"���+"� �3

� ��*����#�

�� ���� �#��#���+� ��"�����#"��� �+"� ������� "�*�1"��3

� ;�"#��+�5����

� 2�"���1��

� ��

� )��"���#���+� ��"���+"� �3

� 2�"���1��

� -#��

� ;�"#

� 2����#

� ����D��.�

Manufacturing and Distribution Planning

3–38 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Processing Options for Period Summary

Defaults

1. Enter the Capacity Mode: ____________ ’1’ = Resource Requirements ’2’ = Rough Cut Capacity ’3’ = Capacity Requirements

2. Enter the default Unit of ____________ Measure. 3. Enter the version of the ____________ Dispatch List to call. The default is ZJDE0001.

Versions

Enter the version for each program. If left blank, version ZJDE0001 will be used.

1. Work Center Revision (P3006) ____________ 2. Forecast Revision (P3460) ____________ 3. MRP/MPS Message Revision ____________ (P3411) 4. Mfg Scheduling Workbench ____________ (P31225)

Reviewing Message Detail

�����#"���#��#����������#�����������@�"����#�� ����#����#������#�������#��"���#"+����*����#������� �������+ "�#��"#��� �����������"#��)��"���5�������#�" �"��"��#�����#��������������� ���������� �������"#"����5�����+���������*����#��������� ���.�#"�� ��.�������#�����

;��)��"���5�������#�" �#��� ������ ������� �#���������>��������#����������"#���������>��������������*�+�������������#�������#����#"�������#�*���-�����"#"������������������ �#���+���#�����+"������������#��������#����������+��#�"�����#��+��*���� ��#�+��#�����*����#��

>������������#����� �������#�������������������������#����������@�"����#�� ����#����#����� �#��� ��������=���#�#���+� ��"��3

� 5�����#��#�������#��������� �

� 5�����#��#������ ���������� �

Reviewing Resource Requirements Plans

3–39OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

���%��'�������������

1���#�����" ��)������)�@�"����#�2 ���"��������78 $$9��������)��"��5�������#�" �

$� �����*��"#�������"#��5���������� �#��#���+� ��"���+"� ������� "�*1"��3

� ��*����#�

�� )��"���#���+� ��"���+"� �3

� 5������

� 5����

� ��#� �;�"#

� ;5

� 2����#

� 2 �����)���*

� ���� ������������� ��#�"#������������ ���+���#���)��������

���������� ������������"#���� ��������������#���)��"���5������#�" �+���

:� ����"���� ����������������*�#���-�� ����� �����.�=������ "�*�1"���

Manufacturing and Distribution Planning

3–40 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

4� ����� ����� �������������� ��#�"#�����������F� �0)� ����+���#��

)��������

5���������� ������"�� "��#���������#����#�"���� ����������#" ��������� ��� ������ �������� �#��#����

&� ����� �#������������ ��#�"#�����������)��""���+���#���)��������

!� ��������"#��5�����)��""����������#�������"#��#������������� "�*��� �#��

Processing Options for Capacity Planning Message Revisions

Defaults

1. Enter the Capacity Mode: ____________ ’1’ = Resource Requirements ’2’ = Rough Cut Capacity ’3’ = Capacity Requirements 2. Enter the default Unit of ____________ Measure. 3. Enter the default version of ____________ Work Center Revision (P3006)

Validating Resource Requirements Plans

A� "��#"������������@�"����#�� ������"#��+�"���#"+�"���#������ �������*����#�����*"�����/�#���#�"��+����#�������������������#"���#��� ������"��#��������#���������/�#���#��"#".�#���#��� ����������#����*����#��

$� ���� �#��#���#���+����"��"���#����������@�"����#�� ���

���������#�������������.���� ���������+

�� )��"��#���+����#�

����!��"���#���'� ���/��&�����*��������"��#���*���������������+

� ���� �#��#���#���+��������#"���#����������@�"����#�� ���

������������������������.���� ���������+

:� )����#�#���#�����#" �� � �����#��������*����#����������"�#��

3–41OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Validating Master Schedules

(+#���������#��#�����#������� ����� "��#��"#�#�������#��#����������++"�"��#���*����#�������"#���;��#���)�������#������"#��2 ���"���7)��29.�#���������#�������#�������"#��� ���"���"�+���#"���

-��������������+#�����#�������.�#��������������#�������"#��� ���"��"�+���#"���+��.�#��)��2����������"#��)�@�"����#�2 ���"���7�)29�������� ��"++������"�"��#�����*����#��#��#�����"���#"+��"��#�����#��� ��#"��������#������+"������� ������52����*�����������#"���"�#��#"���+�"���#�#��)��2�

-+��"#"�� ���*����#��������"��#�����#"����+���������#���*�����#��#��������#���.��5�#�"� �)�@�"����#�2 ���"���75)29��#����#����#�������� �"�� ����5)2�����"��)��2��.������.�#��)��2������)2����#�������.�#��������

�����#��������#��#���+� ��"�����#��#�+���)��23

� ���C�����"#����������C�����"#�������

� ��*����#�� ���

� 2�"��������

�������"���������+���"#"�� ���*����#��"��"#��� �.��������"���������"��������"���������� ��"������#�����*����#�H������"#���(���*���#��"�������.�� �.��"+����"������ �����#��#�����*����#��"����������"#���(���*����#��"�������.������"���"+����"�������"���"����������"#���;��#���2"���<��������������*����#��5�#��)��""���#����+"��#������"���������

A� "��#"���#�����#������� �����"#��+�#���+� ��"���#�*3

� 8����#"����������#������"#��� ��

� )��"��"�����*����#�� ����+��)��2

� )��"��"�����"�������"��+��)��2

� )��"��"�����*������ ��+�������#"���#�#�

� )��"��"����#������� ��������*����#�� ���

Manufacturing and Distribution Planning

3–42 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����+� ��"���#������"���#��#�+������#���"�����#������� �3

*������������ ������������"#�"��"��#��#�����"#�#��#�������"�#��

�"#������*����#��+���������*�������#�����*����

�� �����������#����"� �����������"#�������

��"#������#��������#��+ ���������������������"

"�+���#"���"����"�#����"#������*����#��+������

��*�������#�����*������� �����������#������#�"

"�+���#"���#��.��*����� ����*�����"��#�������

1 ���5��������#��#�������#���� �� �#�����" �. �����

+�������"#��� ���"����>������������ ����#������"�

��������"#�"�+���#"���+���������*����#������+�

�������*�����"���#�����#�0�������)������;�"#

������

"�� ����������� ;��#���)�+���)������;�"#�������#����� �� �#��#��

��*����#�������>������#�"��������� ��+�

����"�����#���-#�������#�����������"�#������#�

F����������������"���#����� #��+�#�����#�����#

�+�������#"������#�����*����#��)������;�"#

+���

Generating Rough Cut Capacity Plans

1���#���2�"��"��)�������#������"#��2 ���"��������78 �$9��������)������#������"#��2 ��+

;��#����������#������"#��� ���7)��29�#��������������#"���52��������@�"����#�#��#��������"#�����" �. ��"���"#"�� ���*����#���)��2�"��"��#����#���������� ����"��#�����#������� ��#�����#��+��". ����*� �����"������#�������+� "�"#���������

��������������#��#���)��2��#����#��3

� -���#"+"���"#"�� ���*����#�

� -���#"+"��#������"���������+���"#"�� ���*����#�

� �� �� �#��#����#��������"#��+���"#"�� ���*����#�

� �� �� �#��#���52�� ����+���"#"�� ���*����#�

����� �� �#���#��������"#��+���"#"�� ���*����#���#����#������#��

+� ��"���#������+��� �3

D��.���+���� �����7������"��9�P������������P��++"�"�����+��#��P�#" "G�#"���+��#�

Validating Master Schedules

3–43OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

>������������ ���� �� �#���++"�"�����.���"�"�"���#����������.����#�� �����1���=��� ���"+�"#�#�*��������$������#������ �#����/�.�#��#���#�����������#�. "�����#��������#�������"���*"����#���������#�++"�"�����7��0�$��?����9�

1���+�������#���"���������#"���7��#�� �����0�#���������9�"��� ���� "G�#"���

;#" "G�#"���"��� �� �#���.��+"��"���#������.���+�����"��������#��#�#�����*���#��"���#�� �����" �. ��+����*"�����������#��#�������$��������#�#" "G�#"���"�������� "#"����� �.�����������#"�����"�#����������� ����.��*�������#���+��#��#��"�� ���++��#��#" "G�#"���

>����� �� �#��#���52�� ����+���"#"�� ���*����#��.���"����"#���#�����#"��#�. ��+��� ��������*�����7O2<�9���#�����#"���"�#��#"���#�. ��+��+"���*�����7O��9��"#������#"����##�������-+�#�����*�����"�+"��7����"��#��#���������"����#��9�.�#�������#����������#"���"�#��#"����##�������#���#������#�����#"���#�. �������+��� ��+���� �� �#"���52�� ������3

2 ����������P����"�������+���#�����#"���#�. �

1"������P����"�������+���#�����#"���"�#��#"���#�. �

���������"��#���2"���<����+"� ��"��#�����*����#��5�#��#�. ��71 ���&9��#��"���#���#�����+����"����#�#�����*����#��

����#"������.��*����� ����"���#������� ��"��"��#��������1 ��5��������#��#������"�����#"�������� ��� ���� ����"�#��#��������#"��+�����>�����#���#��#���#"���.�"��������������@���#"#��"�#��#����@��#"��+�� ������ �� �#"���

�����#������#���+� ��"���+��� ��#���� �� �#��#��� ����+���������#"��3

��*�����@���#"#��P����.���+����"������������#"��0#"���.�"�����

�����#��������#��������#��#�"��"��#�����#������� ����"����C�����"#�������C�����"#��

Before You Begin

� )���#���������@���#"#"��+������#"���#��#�������� �#������#"� ����� �#��#�������#��#�#���+"����+��)� �����<�������"�"���+��="#"�����*������������#�������������������)�������%���������"��#���'���*��������� ��������+

� A�"+��#��#���������"#��="#�+��� ��"#"�� ���*����#��"����������#"��������'������������������������� ������"��#���'���*��������� ��������+

Manufacturing and Distribution Planning

3–44 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

� ��#������� �������������"�� �"���� ��+��)��2������'��������'��������&� �����������������+

� )���#���5�#��2����#"��������� �����������������������'�����,$���������'���������

Processing Options for CRP/RCCP Planning Regeneration (R3382)

Process Tab

���������"�����#"���� �������#�����"+��#�����"�. ��"�+���#"���#��#�#���#������#��������#��#����)20)��2�

1. Under Rated Capacity

;��#�"�����"�����#"���#�����"+��#��������#������#����#��������"#��#��##����#���#" ����"������������ ��������*����#��������#����"� ���������"#����#�#���+�;�7����9�+���������"#�� ����#��#�"� ��#����#��"���#"+"��������#���������#����#����� ���

2. Over Rated Capacity

;��#�"�����"�����#"���#�����"+��#��������#�����#����#��������"#��#��#�#���#����"� ���������#��������������� ��������*����#��������#���"� ����������"#�������#�#��7���9�+�������"#�� ����#��#�������#��#���#���"���#"+"��������#��������#����#����� ���

3. Branch

;��#�"�����"�����#"���#�����"+��#���.�����#��#�#����#������+��#���)20)��2�2 ���"���)������#"���������7) ��9�

4. Supply/Demand Inclusion Rule

;��#�"�����"�����#"���#�����"+����"������ �������������"�� �"���� �#��#�#����#������+��#��������#"����+����"#�������� �������������"�� �"��� ����+"���#����"#�"��#��#�#����#������#��� ��#���#"�������+�����"���

5. Capacity Mode

;��#�"�����"�����#"���#�����"+����"��������"#�������#����#�������A� "��� �����3

� �����#�������������#������"#��� ���"��� �����#�����������"#���@�"����#�� ���"���

Validating Master Schedules

3–45OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

6. Unit of Measure

;��#�"�����"�����#"���#�����"+��#�����"#��+�������#��#�#����#������+�.��*����� "���#��������"#�� �����������+�� #���"#��+�������"�F)�7���9�

7. Roll Up to Dispatch Group

;��#�"�����"�����#"���#�����"+�����#���#����#���� ������ #"� ����*���#��#�����"��#��������+����"����A� "���� �����3

6 ��* ��*����#�������#�� ����#�����"��#��������$ ��*����#��� ����#�����"��#��������

See Also

� ����������������������������

� �����#���������'� �����

� �����#���&������������

� �����#���!��"'���������������������'�����

� �����#�������'����������!��"������$����

Reviewing Work Center Load for RCCP

;��)��"�����*����#��<����#����"���#��� �������������"#��"�+���#"���+�#�����*����#��#��#������ ��#������ �������������"#��"�+���#"������������#���2"���<���������#��#�������#����+��#�����*����#�������*����#�)��""���

Manufacturing and Distribution Planning

3–46 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

���%��''�� �������������*���

1���#�����" ��)�������#������"#��2 ���"��������78 $�9��������)��"����*����#��<����

$� ���)��"�����*����#��<��������� �#��#���+� ��"���+"� ������� "�*�1"��3

� ��*����#�

�� )��"���#���+� ��"���+"� �3

� �#�#���#�

� ;�"#��+�5����

� ���"�#"��

Reviewing Period Summaries for RCCP

;��)��"���2�"����������#����"������"+"��"#���#��#���*�����#��������"#� ����+������+"������"���+������*����#���>��������"���#�����#�" ��+�� ����#�����+�#�������#��#������.��������� ���+������*����#��

�����#�������"G��#��� ����.����"����"���#�����"#��+�������#��#����� ��#�������#���� ������#��������#�����+�#�#� � ����� ������+��#��#��"���+�����"#�������������

Validating Master Schedules

3–47OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

���%��'�����������������*���

1���#�����" ��)�������#������"#��2 ���"��������78 $�9��������2�"���������C�)�������#������"#��

$� �����*��"#��2�"����������)��"�������� �#��#���+� ��"���+"� ������ "�*�1"��3

� ��*����#�

� ;�"#��+�5����

� 2�"���1��

� ��

�� )��"���#���+� ��"���+"� �3

� 2�"������

� -#��

� ;�"#

� 2����#

� ����D��.�

Manufacturing and Distribution Planning

3–48 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Reviewing Work Schedules for Production Status

;������#"����"��#���-�@�"��#�� ���#����������#����*����#������� "��"�+���#"������"���*.��������"�����#���������#�#"�����"�#�+����*���#������� "�������#���� �����+���*�#��#�������+ ����;��#�"�������#�3

� (������*�����"�+���#"����"�� ��"���#����������#�����#� "#������#����#"���"�#��#"��

� )��"�����*�����"�+���#"������������*����#������"�"��� �.����������"��������#������

� ��#���*�����.��#�#���#����@��#�����#���������#"���#�#������

� �������#�����*�����#�#��������#�#���#������@��#�����#�

���%��''�� ���������������������������

1���#�����" ��)�������#������"#��2 ���"��������78 $�9������������#"���"��#���-�@�"��

�����*��"#������#"����"��#�������� �#��#���+� ��"���+"� ������� "�*1"��3

� ��*����#�

� ��������#�#�

Validating Master Schedules

3–49OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����� /&��������

��������#�#� ;����+"����������#��� $��#������������#�������#"��

#�#��"����������������"�#�#��� ��#���*����

"�+���#"���#���"� ���

Processing Options for Operation Dispatch Inquiry

Defaults

1. Enter the Default OPERATION Status Information to preload to the screen at initial inquiry. If left blank, no value will be preloaded:

From Status ____________ Thru Status ____________

2. Enter the Default Number of Days:

Prior to todays date for the From ____________ Date After todays date for the Thru ____________ Date

Versions

Enter the version of Work Order Parts Inquiry to execute. If left blank, ’ZJDE0001’ will be used:

Work Order Parts Inquiry Version ____________

Process

1. Enter ’1’ to subtract Quantity ____________ Cancelled/Scrapped from the Remaining Quantity. If left blank, the remaining quantity value will include cancelled/scrapped quantity.

Reviewing Rate Schedule and Work Center Loads

;�������� ��)��"���#����"���#����#������� �� ��������#�����*����� ���+������*����#���>���������"�������������*�������#���+�#����#������� � ��������#�����*����� �����>�������� ��� ��#������"+"����#�������+���"���#���"���#��� ����+��#�����*����#���-+����������#����/�#�#�������� �� �����#�#�����*����#�������������������� ��"++���#�+��������"���#���*����/�#���#��

������ ��)��"���"������"��" ��+���#�C.����"#�������"����� #���#"���+��"��"���#��� �����������*����#���(�����"�����#"���� �������#��"�� ��� ���������#���.������*������.�+������+#���#�� ����

Manufacturing and Distribution Planning

3–50 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

���%��'���������������'�� �����������

1���#�����" ��2���"���C�)���#"#"��������78 $$49����������*����#������� ��)��"���

$� �����*����#�������� ��)��"�������� �#��#���+� ��"���+"� ��#�� ���#�������*����#������� �3

� 6����02 ��#

� ��*����#�

�� ���������������������� �#��#���+� ��"�����#"��� �+"� ������� "�*1"��3

� ��������

� �++��#"���1��

� ���

Processing Options for Work Center Schedule Review

Defaults

1. Document Type ____________

A specific document type Blank = No default

Validating Master Schedules

3–51OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Disp Options

1. Subfile Dates ____________

1 = Monthly 2 = Weekly 3 = Daily

WO Processing

1. Include Work Order Generated ____________ Loads

1 = Before Rate loads 2 = After Rate loads Blank = No Work Order loads 2. From Operation Status ____________

Include as an active operation Blank = No specific status to include 3. To Operation Status ____________

Include as an active operation Blank = No specific status to include

Versions

Exit Versions

A specific version Blank = ZJDE0001

1. Rate Revisions (P3109) ____________

Manufacturing and Distribution Planning

3–52 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

3–53OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Validating Material Requirements Plans

(+#�����������#��#�����#�"� ��@�"����#�� �������������� "��#��"#�#������#��#�����������++"�"��#���*����#�������"#���;�������"#��)�@�"����#2 ���"���7�)29�#����#��"������#���#�����#�"� �� �������.���=���#����"#�#������" �. ��������

>���� ������)2�#�3

� (�� �G��� ���#"�����*����#�

� -���#"+��#������"���������+����*����#�����"���"��"#��� �.�������"����������"��������"������ ��"����������*����#�H������"#�

� �� �� �#��#����#��������"#��+����*����#�

� �� �� �#��#���5)2� ����+����*����#�

-��������������+#�����#�������.�#��������������#�������"#��� ���"��"�+���#"���+��.�#���)2�����)�������#������"#��2 ���"���7)��29��>����������#����##"���"��#�������"�����#"���#�����������#��#����"++���#�@�"����#�+���)2�

�����"�����"++������.�#������)2�����)��2���3

� �)2���� �G��� ���#"�����*����#��"�#�����+��� ��#����"#"�� ���*���#�

� �)2��++������� #���#"���#�� ��� ������� ������#"���+���

�����#������#���+� ��"���"���#�#���)23

� 1"��5)2���*�����������#"���"�#��#"��

� 2 ������5)2���*�����������#"��

� -�#�� ��#�������

�����#��������#��#���+� ��"�����#��#�+����)23

� ���C�����"#����������C�����"#�������

� ��*����#�� ���

� 2�"��������

Manufacturing and Distribution Planning

3–54 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

A� "��#"���#�����#�"� ��@�"����#�� ������"#��+�#���+� ��"���#�*3

� 8����#"��������"#���@�"����#�� ��

� )��"��"��������"#���@�"����#�� ��

����������#��#��������#���� "��#��#�����#�"� ��@�"����#�� ������#������������#��#��������#���� "��#��#�����#������� ��+���)2��52������)��2�

Before You Begin

� �)2�+� ���#������� ��� ��+�����#"��� �� ���"�����5)2��>������ �������"G��#���+� ��"���"�+���#"���+��.�#��5)2������)23

� ����� ���"�����"G��

� ������*������������#�#���

� ����#�#���"��#������ �������������"�� �"���� �

See Also

� 0��������������'��������+����#�" ���"�+���#"�����������#"��������"��"���#���)��2

Generating Capacity Requirements Plans

1���#��2�"��"��)�����0�����"#��2 ���"��������78 �$9�������������"#�)�@�"����#�2 ���

;��#��������"#��)�@�"����#�2 ���������#��������������#"���5)2�������@�"����#�#��#��������"#�����" �. ��"����*����#����)2�"��"��#����#���������� ����"��#�����#�"� ��@�"����#�� ���#�����#��+��". ���*� ������"������#�������+� "�"#���������

Before You Begin

� )���#���������@���#"#"��+������#"���#��#�������� �#������#"� ����� �#��#�������#��#�#���+"����+��)� �����<�����������#������������������)�������%����������"��#���'���*��������� ���������

� A�"+��#��#���������"#��="#�+��� ���*����#��"�����������#"�������'������������������������� ������"��#���'���*��������� ���������

Validating Material Requirements Plans

3–55OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

� ��#������� �������������"�� �"���� �������'��������'��������&� ������������������

� )���5)2������#"���������������������������.���� ���������+

See Also

� �������������������������������+��"�+���#"������#�������"����#"��

� �����������������������������"+��������#�#�������#��#���"�+���#"������� ��"�#�����+�.��.�#�������"��

Reviewing Capacity Requirements Plans

��������������#���������"#���@�"����#�� ����#����#������#����#"���"��#��#�����#��� ������"��������� ���"�����"���+������*����#���-+�������������"G������� ���*����#�������"��#�������������"���#��������+���#"����"�" ������#"������#���"����#"�������������"���#��������#�������������"#���++��#�� ��+�#�����*����#��"��#��������

>���������"�������"���+��������"���#����#��"���#��� ����#��#�"�� �����������*����#��.�������"#����������>�������� ����"���������+��������*����#�������� �#���� �������� ���������-+�#����#���������#����C�����"#��������C�����"#������"#"��������������"���#���� ������"���#"+��#�����"�������*����#��"����"���#�������"#"���������-#��"��#�.��������#����/�#�#���+����#��������"#�����������#��#��������"#��@�"����#�� ������"��

�����"���#��������"#���@�"����#�� ������������"++���#���"����+�#������������#��#���������#����"���#����������@�"����#�� ���

���� �#��#���+� ��"���#�*3

� )��"����"��#��������+���)2

� )��"�����*����#�� ����+���)2

� )��"�����"�������"��+���)2

� )��"���5)2���*������ �����#����"��#��� "#

� )��"���5)2��#������� ��������*����� ���

� A� "��#��#��������"#���@�"����#�� ��

Manufacturing and Distribution Planning

3–56 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Reviewing Dispatch Groups for CRP

1���#�����" �������"#��)�@�"����#������78 $ 9��������)��"����"��#��8����

-+����� ���*����#���������"G��������"��#������������������"���#�������#����#��"������������"#���++��#�� ��+�#�����*����#��"��#���������"��#�����������. ������#������"G����*����#�������"���#��������+���#"����"�" ������#"��������#"���#���

�����������"����"��#������������������ ����"����������.��#�� �#����*����#��"��#���������������#��#�"�+���#"���#����"#".�#��#��� ����"#�"��#��������

�����������"����"��#��������+���)2���������#�������������������������"����"��#��������+��)������)�@�"����#�2 ���"����>����������#����##"���"��#�������"�����#"���#�����������#��#����"++���#�@�"����#�+���)2�

See Also

� �����#���&�������������������

Reviewing Work Center Load for CRP

1���#�����" �������"#��)�@�"����#������78 $ 9��������)��"�����*���#��<����

>���������"���#��������"#�� �����#��������*����#���;��#�"�"�+���#"���#���#��"������#���#����/�#������"#����#���+����#�������������#����"��������"�� �.��*������.��� ���"�����"�����+�#��� ����� ������������*���#��

)��"�����*����#��<����+���)2����#���������������)��"�����*���#��<����+��)������)�@�"����#�2 ���"����>�����������#����##"���"�#�������"�����#"���#�����������#��#����"++���#��@�"����#�+���)2�

Before You Begin

� A�"+��#��#�������������"#����������"#���@�"����#�� ����������#�

See Also

� �����#���!��"������$���������

Validating Material Requirements Plans

3–57OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Reviewing Period Summaries for CRP

1���#�����" �������"#��)�@�"����#������78 $ 9��������2�"����������C�����"#��)�@�"����#�

-�����"#"���#����"��"���#��������"#�� �����+�����*����#�������������� ��#�#��� ����� ������������*����#��.��"#����>���������"��3

� ����"#���#��#��������� ���+������*����#�

� �������.���+���"#��+����"#���#��#���*�����#��� ���

� ���������#��+�#���#�#� � �������#�����*����#��#��#�"�+�������"+"�"#��H�+����#

>������#�"�"�+���#"���#����#��"������#���#����/�#�#���+����#���#�������"#���#�#�����*����#��

�����������"�����"�������"��+���)2���������#�������������������������"�����"�������"��+��)������)�@�"����#�2 ���"����>����������#����##"���"��#�������"�����#"���#�����������#��#����"++���#�@�"����#�+���)2�

������ ��#��#��� ����� ������������*����#��.��"#��������������"���#��2�"����������)���#�

See Also

� �����#���������'� �����

Reviewing MRP Work Schedules on the Dispatch List

1���#�����" �������"#��)�@�"����#�2 ���"��������78 $ 9��������"��#���<"#�

;��#����"��#���<"#�#�� ���#����������#����*����#������� "���"�+���#"�����"���*.��������"�����#���������#�#"�����"�#�+����*����#������ "�������#���� �����+���*�#��#�������+ ����;��#�"�������#�3

� (������*�����"�+���#"����������#���������������#� "#

� A"�����*�����"�+���#"������������*����#������"�"��� �.������"�������������#������

� ��#���*�����.��#�#���#����@��#�����#�����#�#�����������#"��

� �������#�����*�����#�#��������#�#���#������@��#�����#�

Manufacturing and Distribution Planning

3–58 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

-+�����*����#��"���� ������������"��#����"���#���+� ��"���� #���#"���#��"#".�#����#�"� ����� �.���@�"����#�#����*��#�����*����#�� ��������������". �3

� �++�"������#"��

� �����"����"���C ��� �������� ��� �.�� ���

� 2��"�"���� #���#"�����#"��

� (��"����"+#

� ;"���������+����#�����*����#�

� ��#���"��

�����"��#���<"#�+��5)2����#���������������#����"��#���<"#�+��)2052���>�����������#����##"���"��#�������"�����#"���#�����������#�#����"++���#��@�"����#�+��5)2�

See Also

� �����#���!��"'���������������������'������+��#�������"�����#"��+��#�"������

Reviewing MRP Rate Schedule and Work Order Loads

1���#�����" ��2���"���C�)���#"#"��������78 $$49����������*����#������� ��)��"���

;�������� ��)��"���#����"���#����#������� �� ��������#�����*����� ���+������*����#���>���������"�������������*�������#���+�#����#������� � ��������#�����*����� �����>�������� ��� ��#������"+"����#�������+���"���#���"���#��� ����+��#�����*����#���-+����������#����/�#�#�������� �� �����#�#�����*����#�������������������� ��"++���#�+���+�����"���#���*����/�#���#�

������ ��)��"���"������"��" ��+���#�C.����"#�������"����� #���#"���+��"��"���#��� �����������*����#���(�����"�����#"���� �������#��"�� ��� ���������#���.������*������.�+������+#���#�� ����

�����������"�������� ��+��5)2��������#�������������������������"�������� ��+���)2�����52���>�����������#����##"���"��#�������"����#"���#�����������#��#����"++���#��@�"����#�+��5)2�

See Also

� �����#�������'����������!��"������$����

Validating Material Requirements Plans

3–59OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Validating the Capacity Requirements Plan

A� "��#"���#��������"#���@�"����#�� ������"#��+�"���#"+�"���#������ �������*����#�����*"�����/�#���#�"��+����#�������������������#"���#��� ������"��#�����"+�#�����/�#���#�#��#������������������� ���"#".�#���#�� �������#�����*����#��

$ ���� �#��#���#���+����"��"���#��������"#���@�"����#�� ���

���������#�������������.���� ���������+

�� )��"��#���+����#�

������������'����(����)�������"��#���*���������������+

� ���� �#��#���#���+��������#"���#��������"#���@�"����#�� ���

������������������������.���� ���������+

:� )����#�#���#�����#" �� � �����#��������*����#����������"�#��

Manufacturing and Distribution Planning

3–60 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Master Production Scheduling

Manufacturing and Distribution Planning

3–62 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

4–1OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Master Production Scheduling

(���#������� ��"���#�#����#��+����#�#������������=���#�#��������.�������#���#��#"�� �� �������.����#����#�"�#��(���#�C����� ���"#���"�"#"�� �"��"#�"����#���� ���C ��� ���������#����������������*" �� �.���*�������"���������������"�� �C ��� ������ "���"�� "����#������ "����#�#���"#��� ��� ��+���������� "���. ����5� #" ��� ���#������� ��=� ����� ���������������#����������#�"#���

������#������� "�����������"#��+3

� ��#��"�"������#����������7+����#����#�������������"�#�� ��#������9

� ��.#��#"������#����������7"����#����������������������*����9

� �� �� �#"�����#��@�"����#�������������������#���

>������������#������#������� ��+��� �"#�����+������#�������������#"�����"���"�� ������ ��"#���#��#������.�����++��#���.��#����#"���"����#��� �#�����#"����(+#�����������#��#�����#������� �������������"������������#��������

2����"�������#������� �����"#��+�#���+� ��"��3

� ;���#���"���#"���+���������#���#"����"��

� 8����#"���"�� �C ��� ���#������� �

� )��"��"���#���#"����"�

� ��*"����"#���)2052����#��#

� ;���#���"���+����#�������#"��

� A� "��#"�����#������� �

� 2���"�������

� ��*"����"#���� #" ��� ���#������� �

Manufacturing and Distribution Planning

4–2 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

DRP and Purchased Items

1���"#".�#"���.�"������)2����"������#� "G������#� ��+��"#".�#"��"����#�"���������#��������"��#����� ��"����#�� ����

Tactical Plan

Demand Supply

Forecast Open Purchase Orders

Open Sales Orders Inventory

In Receipt Routing

Product DataManagement

Purchase Orders Messages

Time Series

Supply/Demand Inquiry

DRP

MPS and Manufactured Items

>������52��#�������#��#�����#������� ��+������+��#����"#���������������#���� ����� ��"����#�+��.�#����������"#������

4–3OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����+��#����"#���"��#������������#"����������2���"�����#"������#� ����#����#������#��������#"���

Tactical Plan

Demand Supply

Validated Forecast Firm Work Orders

Open Sales Orders Rate Schedules

Open Purchase Orders

In Receipt Routing

Inventory

Product Data Management Rough Cut Capacity Planning

Purchase Orders Planned Work Orders

Firm Work Orders

Messages

Time Series

Supply/Demand Inquiry

MPS

Validated Master Schedule

Material Requirements Planning

Manufacturing and Distribution Planning

4–4 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

4–5OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Understanding Time Fences and the Time Series

�"���+����������"�#�"��#"���#��#�����������*���������#���"#����� "��������#"������������������������+#����"�� ����#����+����3�

� 1��G�

� 2 ���"��

� 5������"� ��

����(��������� �������.���+�����+���#��������#"���#�#���#���"#�"�

��"���#����#������ ����#��"� ��������������1�

�=��� ���"+�#��������#"���#�#���#��"��$0� 0�4������#��

+��G��#"���+�����"� ������#���� ���"����#���������#

�"� ����������"#����#���"��#�����@�� �#���$0�&0�4�

���������������� �������.���+�����#��#�#����#������"�����/���#"��

�"#��#���#"���+������ ��#����#��"�������#���+����#�"

�������#��#������.���+������+#��#��������#"���#�#

��#�������#���#"���+������ ���������+���#���+"#�� �

#��#���������� ���1���=��� ���"+�#���#"���+������ ��"��

7��#�����������.�+���#���#"���+������+����#��+#��#��

#"���+����9��#��������#"���#�#���#��"��$0� 0�4������#��

� ���"���#"���+�����"� ������#����#���� ��������"��

#����#�����������#�������$0�&0�4��6��"��"�����

�$0�!0�4��#����#���� ��������"���#��#���+����#�

,������$����������

�$�

�������.���+������+#��#��������#"���#�#���#���"#�"�

��"���#����#������ ���"� ��������������1�

�=��� ���"+�#��������#"���#�#���#��"��$0�$0�4������#��

������+�����"� �������#����#����"� ��������

�"#����#�� ��#�������@�� �#���$0 $0�4�������#������

��#��"� ����������"#����#���+���0�$0�4��� �#��

F�������#���� ���"�����"G���+���������#"������#

#�"���#������"��+ ��#���"�����" �. ��#�����"��#�#� �

�"���+�����������"#"�� �"���#�#��#�����#������� �������#"����"��"�#���"������#��#��+�#�����#������� ��

Manufacturing and Distribution Planning

4–6 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

EmergencyChanges Only

Planning Fence RuleDescription 1

PlanningFence Rule

Description 2

HaltMessages

Final Assembly andDelivery

ManufactureComponents

PurchaseMaterial

FlexibleSchedule

Today Freeze Planning MessageDisplay

>������"+�����#���5���+��#�"�����#��+���#������.���+������+#��#�������#"���#�#���#��#��.��"�� �����"�������#"���+�������"����D�#��#��+� ��"����.��#�#"���+����3

� �����#���������#�����#�#��������#"���#�#���#�M�#��#�"��#��������+#�#��������#"���#�#���#��"�����$�

� 1������+��#����"#����#����#�������#���*"������������+"����"��#�������1 ����� �����

� 1����������"#����#����#�������#��� ���������

What Are Time Fence Rules?

��������������#"���+������ ��+��� ���"���#��#��� �� �#��������"������" �. ������#�#��#�"�.�������#������#���+�+����#�����#������������#���+����#"�K��������L�1��� ��������8��#�"������#��#�#���+����#�"��������.��#�������#��+�#�����#��������������#��#�����#"���.��*�#�������#����"� ��� ���/�#�����������/�#����� ����-��#���+� ��"���#�. ���#�"���� "��#��� ����8������F��

������������+#�������#���+� ��"���#"���+������ ��+��� ���"��3

*���� ���"�#"���$

� ��#����������

���"�#"����

� ��"������"����#���+����#�����#����������

*���� ���"�#"���$

� 1����#

���"�#"����

� 1����#�� ����#����������

Understanding Time Fences and the Time Series

4–7OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

*���! ���"�#"���$

� ��"������"����#���+����#�����#����������

���"�#"����

� 1����#

)� ��8�"�#�����+�� #�

*���� ���"�#"���$

� ��"������"����#���+����#�����#����������

������������� ���"���+������ ��F������������

���������#��#������#�#���2 ���"���1�����+"� �����#��

2 ��#�5���+��#�"�����#��+���#��%%%�

*���� ���"�#"���$

� ��#����������

���"�#"����

� 1����#

*���1 ���"�#"���$

� U��

���"�#"����

� 1����#

*���5 ���"�#"���$

� U��

���"�#"����

� 1����#�� ����#����������

What Are the Time Series Calculations?

����#"����"�������#�#������������#������� ���)��"���#���#"����"�#�����"������#���#�������#������"���#���� ���"���#��#�#����#�������#�

����5���+��#�"��������"#".�#"���2 ���"����#������"���#�����"++���##"����"���� �� �#"������+� ��3

� ���"������" �. �

� (��" �. ��#�����"�

� ���� �#"������" �. ��#�����"�

Manufacturing and Distribution Planning

4–8 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

See Also

� *������������ ����������������

Example: Ending Available Calculation

���"���(��" �. ��7�(9�"�#��������#��+������#����" �. ���#�#��������+���#"��.��*�#��+#��#����#����� �� �#��#����++��#��+�� ���� "������� ��������+�#���#"���.��*�#�������#������#���� ���"���#"���+������ ������#���+� ��"��

�� �� �#"���#���� �� �#��#������"������" �. �������#3�

� (����"#�"��#���#"���.��*�#3

� 6��"��"���(��" �. ��7O6(9

1��#���+"#�#"�����"����O6(�?�@���#"#����������C��+�#��#��*

1�����"�"���#"�����"����O6(�?����"������" �. ��+���#�����"���#"�����"���7?�(9

� ��.#��#������"���#��#���� ���"���#"���+������ �3

� 1����#�7C1���9

� ��#�����������7� ����������"�#�� ��#�������9

� �������"����"�#������"������" �. ��7�(9

����+� ��"���#�. ����������#����#����� �� �#��#��������#��+������#���" �. ���#�#��������+���#"�����"����(����#��#�#��� �#�"G��?� �#�+�� �#���+�#�#��*�?�����#"���+������ ��+��� ���"���?�������� ���#"���?�$������� ���"��+�����"�.�#�������"���+�������+"���

������������

���F����?��� 1 4 5 0 ; 6 8 <

O6( &� :� �4 �4 � � � �

C1��� �� �� �� �� �� �� �� ��

C�� �� $4 :� :4

?�( :� �4 �4 � � � � �

O�)2 $4 �� �� :4 ��

7�����#�#9 $4 �� �� :4 ��

Example: Available to Promise Calculation

(��" �. ��#�����"��7(�29�"�#���������"##�����#"����+����������H�"����#����� ��������@�""#"����>������#�"������#�#�������#� �����"����#��������(� ����������+��#�"���������������"���#��#���52������� ���*������"#���#������"���#��#���(�2�"�+���#"����#�"���#����"�����

��#������"�������������"����#������"�����#�

Understanding Time Fences and the Time Series

4–9OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

(��" �. ��#�����"�������#�� ���#��������#��"���#"+��"����#���#��#����.�����"���#������#���������#"���+������ ��+��� ���"����������++��#���(�2��1����#�"������"�� �����"��(�2��� �� �#"���

�����#����� �� �#��#���(�2�@���#"#����+� ��3

� 1"#���"���(�2�?���C�����.� �����C��+�#��#��*�O���*�����O�����������O�� ����������C�� ������C���*�������#� "#�������C�"�#�� ��#��������C����������� �#�@���#"#"��#��#�����=�"��

� (+#��#���+"#���"����(�2�?���*�����O������������O�� ���������C�� ������C���*�������#� "#��������C�"�#�� ��#��������C���������� �#�@���#"#"��#��#�����=�"��

�����#���������#��"� �������#"���(�2�+��+� ��"�����"����F������#����#���������#������� �#"������" �. ��#�����"��7�(�29�.��#������#"��������#�

Example: Cumulative Available to Promise Calculation

���� �#"������" �. ��#�����"��7�(�29�"������"���#�#� ��+�#���(�2��

1�����������#�������� ������#��.�" �"���"����#����"��#�.����#��+�#�����������#�#�#�����-��#���������� ��������*�#"����"��#���#�.���=���#��#��� ��"#�"��#����� ��"����#�.��*�#������.� *��+�� ���"��#���#�.��"��#������+�#���

�����#����� �� �#���(�2���+� ��3

� 1"#���"����(�2�?�.��"��"������" �. ��O��� ��"����#�C�����+��#����������������#��������.�+���#�����=#��� ��"����#

� (+#��#���+"#���"�����(�2�?��(�2�+��� �#���"���O��� ��"����#�C����+���#����������������#��������.�+���#�����=#��� ��"����#

�(�2�������#���������� �#����� �#"����)�#����#����#������#"����#�����"����#���

Manufacturing and Distribution Planning

4–10 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����+� ��"���#�. ����������#����#����� �� �#���(�2��(����#��#�#��� �#"G��?�+"=���&����+�#��#��*�?����#"���+������ ��+��� ���"���?�������� ���#"���?$������� ���"���+�����"�.�#�������"���+�������+"���

������

���F����?��� 1 4 5 0 ; 6 8 <

O6( �� 4� �4 44 :4 �4 4� �

C1��� �� �� �� �� �� �� �� ��

C�� � �4 � $� 4

?�( 4� �4 44 :4 �4 4� � $�

O�)2 &� &�

(�2 �4 �� �4

�(�2 �4 �4 :4 :4 :4 !� !� !�

4–11OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Generating Single-Level Master Schedules

>������������#������#������� ��+����"�� ��"#������ �"#�����������������#������#������� ���#����#������ ��#��� ��#���"�+���#"������+���� �� �#"�������������������#"��C������� ���"�������� ��+��� �� ��#��"#����(#����"�"������������ �������#������#������� �����* ��#��*����#��� �������#�

>��������#�#���8����#"���5��������"�����#"���#�������#�����������"���#�������)������#"�������D�#����������"�����"#����#�����������"����#����#���"�� ������ ��#����"#���#��#��������������"����#��� �#�����#"����;��#���D�#��������)��"���������#����#��"�����"���"#���#�"�� ����"��#�����#�������������#"���

���� �#��#���+� ��"���#�*3

� 8����#������#������� ��+��� �"#��

� )��"���"#���+����#�������

� 8����#������#������� ��+��� ��#���"#��

Before You Begin

� 8����#����+����#�+��"���������#��������"#����������������&�����*���������"��#���*����������������

� 8����#�����������@�"����#�� ����������������������������.���� ����������

Generating a Master Schedule for All Items

1���#����"�� ���"#��2�"��"��2 ���"�������#"��������78 :��9��������)2�52��)������#"���

Manufacturing and Distribution Planning

4–12 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

�)2�����52��������#"������#�������������#�����������"�� �C ��� �)2���52������� ��+��� �"#���#��#����#�#�����#��� ��#"����"#�"�����������3

� )����#���� ��#���+����#���� �����

� ;����#��+���#����)2052�05)2�"�� �"���� ��#���� �� �#��@�"����#�+����#��� ������"#��

� ������#��=� ����� ����������#��#���." ��+���#�"� ���������#

>�������� �������#������#������� ��+��"#����"���+����#�������#"��� ���"���� ��F��1����#�������#"�������������+����#����������"�������.����#�� �� ���������"�������"���������#��#���+����#��@���#"#���6�������"���#���+����#������������"�����������#"�������� �#���+ ��#�#�����#���C#�C��#��"�+���#"����6�+���#��������������#�������� ���"#��� �#��#�������������#"����"��#�. ��+��#���� ��#���"#���

>����������52�0�)205)2���� � �����"��������#���#������#�*�����.�������� �#���"���#����#����-��#������ � �����"�����#�����#����#��� �������#��������"#���"�� #����� ��.���#" "G"����� #"� �����������"��#����#�*��� ������������#����=���#����.�#������������������#��#�������#���������������������� � �����"�����#�������"���"��"+"���#���+���������"�����"������ "�"#����� ��.��#������.���+������#��#�������" �. �������������

�����#������#��������#���.�#�����"���#�������� � �����"����-�#�"���"����#����#������������"�����#"���#��#�"��"��#��#������.���+���+"�����������������#������#����������#���=���#��#���.�#�����"���

����������#����������"���#�������#������#������� ���������� ����"���#���+� ��"���"�+���#"��3

$������������ 6���������#��� ��#"������.����0� ��#����#���������

7��� ��5�#��2 ���"���1��" �9������� ���"���������(��

� ��#"���+���.���C���#�. ��+"� ������.���������

$�����+����� �����#�����#���@������+���#������#��=��� ��������#

�������#�"��@�������������"�#�. ���� #��"��#������

See Also

� �������������*������������ ������+�����"#"��� �"�+���#"����������#"�������#������� ���"���� ���"���� ��F

� ��������������������������������+�����"#"��� �"�+���#"������������ � �����"�����*

Generating Single-Level Master Schedules

4–13OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Processing Options for DRP/MPS/MRP (R3482)

Horizon Tab

���������"�����#"������"+����#������#"�����"���#�������������������#"���#���� ���

1. Generation Start Date

;��#�"�����"�����#"���#�����"+��#�����#��#������������#��#�#�#��� ���"�����������"���#��"�� ��#���.��"��"����+�#���� ���"�����"G���

2. Past Due Periods

����������"�� ������� �������������+���#�"����.���+���"����"��#�#���8����#"����#�#���#��

A� "���� �����3

� ����"���7��+�� #9$ $���"��� ����"��

3. Planning Horizon Periods

Number of planning days

;��#�"�����"�����#"���#�����"+��#������.���+�����#��.��"�� �����"��#��� ����1���=��� �������������"���#���#"����"������������" ����#��+��#�����.���+�� ���"��������#�������* ����#��+��#������.���+�� ���"������*�#�������#� ����#��+��#������.���+�� ���"������#��

Number of planning weeks

;��#�"�����"�����#"���#�����"+��#������.���+����*�#��.��"�� �����"��#��� ����1���=��� �������������"���#���#"����"������������" ����#��+��#�����.���+�� ���"��������#�������* ����#��+��#������.���+�� ���"������*�#�������#� ����#��+��#������.���+�� ���"������#��

Number of planning months

;��#�"�����"�����#"���#�����"+��#������.���+����#��#��.��"�� �����"�#���� ����1���=��� �������������"���#���#"����"������������" ����#��+��#�����.���+�� ���"��������#�������* ����#��+��#������.���+�� ���"������*�#�������#� ����#��+��#������.���+�� ���"������#��

Manufacturing and Distribution Planning

4–14 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Parameters Tab

;��#��������"�����#"���#����+"�������"����"#�"���2 ������#��#��+� ��"����.��#��������"����+������#"���#����

8����#"��������$�?�"�� �C ��� �52�0�)2����"������#"���#��������.������"#���"�����"#".�#"������"�����#�+������������#��"#��������#0��������#�� �#"���"�����"��������+��#�"������"�����#��"#�����#0��������#�� �#"���"��

� �������������������#"����"��+�������"#������"+"���"��#�����#�� ��#"����"#����2 ���"���������+�$����#���2 ��#�5���+��#�"�����#��+������#���#���"#���"�����+��#��������������

� 1������+��#����"#��������������"��=� ����������#��#����������#��;�������#"���#����$�"+��������#�#��������� ��#�����#������ �������"#���+"#��������������#�." "G��#�������� ��.�+��� ��"�������������#�����������#�

� D������"��������������#���

8����#"����������?�� ���"���." ��;��#�"������#"���#����#��� ���+��"#���#��#�������� ���"���." ��+���#�"� ��(�� ���"���." ������K�����L�����#�"#���#��#"��������#�� ������+��#�����.�#��#�������#�������#�#��������������"#"����+���������+������#�

��"������#"���#�����=� ����������#�+����#�#��"#���������#�.���� #"� �"��#�������#H�+����#�.��#���1��#���2 ������2����#�7+���#���." ��+���#�"� 9+���������������#������������#�������#��������+����#�+��#����������#��1���=��� ���������������#�"#���."*���"��#��������+����#��+$�����������������"#".�#��#��#�+����#�"�#����+����#��+�$�������#�"�."*���4���#��"���."*�������:��������#��."*��

����+� ��"�����#�.���#��������# ��#�����#�"������#"���#���3

� ��������������#�"#�����#��������2 ���"���������+�:����2 ��#5���+��#�"�����#�

� ������������#���#��������2 ���"���������+�4

� ����1��#���2 ������2����#���#�.���#��������# �

� >�����#����"+��"������"�����#"���#���+����#�#����#������+���#������#������#�����#��+��#�����������#

8����#"�������� �?��� #"C ��� �52�����"������#"���#����"����� #���#"���#������#"���#����$��������+��������� �#��#��C#�C.�##�������"����+���#������ ���"#���������������=� �����������+��� �����#�"#����������"+�"��#�����#��� ��#"��������#��#�����������#��>�����#����"+��� �"#���#��.��������"��#�����#��� ��#"������#�/�#�#�������#�"#��������������� ����#������"��������

Generating Single-Level Master Schedules

4–15OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

8����#"��������:�?�5)2��"#�����"#���#�52�����"������#"���#�������#������+���#"��� "#���������#"���#���� ��-+��������������������� �#�������#"������#�." "G���������#������� ����������� "�"#���#��� ��#"���#��5)2�"#��7�"#��2 ���"���������+����� 9��#���.������"�������"���#"������"�"��". ��.�������������+���#�����#������� ���"#���"�#" �#����"��#��52�05)20�)2�<����<��� �)�@�"����#�72���"��9�#�. ��

8����#"��������4�?�5)2��"#��+�G���52�����"������#"���#����+��G��#����#������� ���+#��"#����.����#�." "G����6�+������"���#�"������#"���#����������� ����*��� ����������/�#���#�#����#������� ���"#������� ��������#�������#�������������"������#"���#����+��G��#�����#"�� ���"�����"G���"�" ��#��#�������#���+��G��+�����+��G������#��+�#����"G����)���"���#�"������#"���#�������#���+� ��"����� #3

� D�����������" �.��� ������

� D��������+���="#"��������" �.�����#���

� ����(�/�#������"���(��" �. ��@���#"#��"�� �����#���������#"���

� �������"��� ���=� ����������#����������#�+����="#"�����*����������"����C2����������+�������#�"#������ ��C1����������

1. Generation Mode

(����������#"���"�� ���������"#������"+"���"��#�����#��� ��#"����(���#�������"�� ������ ��#����"#���"��#�����#��� ��#"���#��#��������������"���#��� �#�#"����������#���������

A� "���� �����3

$ ��#�������� ���������#"��

2. Generation Type

2 �������#����� ��+��#���2����#��#�.�+����#�" ���"�+���#"���

A� "���� �����3

$ "�� �C ��� �52�0�)2� � ���"���." �� #"C ��� �52�: 5)2��"#�����"#���#�52�4 5)2��"#��+�G���52�

3. UDC Type

;��#�"�����"�����#"���#�����"+��#���;���#�. ��7�#��� :9�#��#����#�"��#�� "#��+�@���#"#��#����#��.���� �� �#��������"##���#��#����"�����"��#�. �71 :$ 9����+�� #�?�E��

Manufacturing and Distribution Planning

4–16 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

4. Version of Supply/Demand Inclusion Rules

;��#�"�����"�����#"���#����+"�����"�����"����+���� �0�������"�� �"��� ��#�������������������� ����+"���#����"#�"������#��� ��#�"#���+�����"���

On-Hand Data Tab

���������"�����#"�����+"�������#����������� �� �#����C�����"����#���

1. Include Lot Expiration Dates

;��#�"�����"�����#"���#�����"+�����#���#����#������"��� �#��=�"�#"����#��������� �� �#"�����C�����"����#����1���=��� ���"+���������������C������"#������=�"�#"�����#���+�(���#� $�����4������������������������#��.��$�����4��#���������������#������"G��#����=�"��� �#��������#���������#������������+��#��������+�#���"#���#���#"+���������

A� "���� �����3

. ��* �����#����"��� �#��=�"�#"�����#��������� �� �#"�����C�����"����#��$ ���"��� �#��=�"�#"�����#��������� �� �#"�����C�����"����#��

2. Safety Stock Decrease

;��#�"�����"�����#"���#�����"+�����#���#��� ���.���������.��"��"�����" �. ��@���#"#��+�����"���#����+�#��#��*�@���#"#�����.�����.#��#���

A� "���� �����3

. ��* �����#�������$ ������

3. Receipt Routing Quantities

Quantity in Transit

-��������+��#�"������"�����#�����#"���"#�"��������#���#�. "������#��*�"��"������#����#��"������#�������#�"#�"����" �. ��+��"����"�#�������#��$�"+��������#�@���#"#"��"��#��"#�#��.��"�� �����"��#���6��"��"���(��" �. ��� �� �#"������#���#"����"����#���"���#���������"�� ����#����@���#"#"�"��#���-��)���"�#�7O-)9� "����+�#���#"����"�������@���#"#"�����#" ����"�������" �. ��.��#�"�������������"++������"��� ��"�����������"���#���@���#"#"�"��#���#"����"��

A� "���� �����3

. ��* �����#�"�� ����"����C�����"����#��

Generating Single-Level Master Schedules

4–17OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

$ "�� ����"����C�����"����#��

Quantity in Inspection

-��������+��#�"������"�����#�����#"���"#�"��������#���#�. "������#��*�"��"������#����#��"������#�������#�"#�"����" �. ��+��"����"�#�������#��$�"+��������#�@���#"#"��"��"����#"���#��.��"�� �����"��#���6��"��"��(��" �. ���� �� �#"�����#���"���#���������"�� ����#����@���#"#"��"��#���-�)���"�#�7O-)9� "����+�#���#"����"�������@���#"#"�����#" ����"��������" �. �.��#�"���������������������"++������"��� ��"�����������"���#���@���#"#"�"��#���#"����"��

A� "���� �����3

. ��* �����#�"�� ����"����C�����"����#��$ "�� ����"����C�����"����#��

User Defined Quantity 1

-��������+��#�"������"�����#�����#"���"#�"��������#���#�. "������#��*�"��"������#����#��"������#�������#�"#�"����" �. ��+��"����"�#�������#��$�"+��������#�#���������+"����@���#"#"��7��+"�������)���"�#�)��#"��)��""���"��#���;���#������#"���$�+"� �9�#��.��"�� �����"��#���6��"��"��(��" �. ���� �� �#"�����#���"���#���������"�� ����#����@���#"#"��"��#���-�)���"�#�7O-)9� "����+�#���#"����"�������@���#"#"�����#" ����"��������" �. �.��#�"���������������������"++������"��� ��"�����������"���#���@���#"#"�"��#���#"����"��

A� "���� �����3

. ��* �����#�"�� ����"����C�����"����#��$ "�� ����"����C�����"����#��

User Defined Quantity 2

-��������+��#�"������"�����#�����#"���"#�"��������#���#�. "������#��*�"��"������#����#��"������#�������#�"#�"����" �. ��+��"����"�#�������#��$�"+��������#�#���������+"����@���#"#"��7��+"�������)���"�#�)��#"��)��""���"��#���;���#������#"�����+"� �9�#��.��"�� �����"��#���6��"��"��(��" �. ���� �� �#"�����#���"���#���������"�� ����#����@���#"#"��"��#���-�)���"�#�7O-)9� "����+�#���#"����"�������@���#"#"�����#" ����"��������" �. �.��#�"���������������������"++������"��� ��"�����������"���#���@���#"#"�"��#���#"����"��

A� "���� �����3

. ��* �����#�"�� ����"����C�����"����#��$ "�� ����"����C�����"����#��

Manufacturing and Distribution Planning

4–18 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

4. Lot Hold Codes (up to 5)

;��#�"�����"�����#"���#�����"+��#��� �#�#��.��"�� �����"��#����� �� �#"����+��C�����"����#����>���������#������="�����+�4� �#��� �������7:$0<9�

. ��* "�� ��������� �� �#�"���� �� �#"����+���C�����"����#��P "�� ����� ��� �� �#�"���� �� �#"����+���C�����"����#��

Forecasting Tab

���������"�����#"�������#��������3

� �����#��"������#�+����#�#����#���������������������

� ���"�"#"�#�����"� � ��"��+��+����#�������#"��

1. Forecast Types Used (up to 5)

1����#������������+���������>����������#��+����#��"���$���"++���#+����#�#����7 :0�19��"#�"��#���1����#"����#��������"����"�����#���6�#1"#�7619�#������������#�����"#��H��"#����+���������;��#�"�����"����#"���#����+"�����"���+����#�@���#"#"�����#���.����"���+����#�#������"�� �����"��#���� ���"�����������#���� #"� ���� ����"#�����������+��=��� �3��$��61�

2. MPS Forecast Type for Planning Bills

�����������������#"���#������7+��� ���"���." 9��+����#�+��#�������#�"�=� ����������#�����#��+����#�+��#�����������#��;��#�"�����"����#"���#�����"+��#���+����#�#����7 :0�19��������#�#�����#��+��#����������#��>�����#�� ����#��#�"�+����#�#����"��#���1����#������;������"�����#"���

3. Forecast Consumption Logic

-+��������+����#�������#"��������� ����������"��#���������"�����#��+����#�"�"�� ���������#��+�#���+����#�+��#��#���"����-#�"���#�������"#"��� ������+��������

������+����#�������#"�������"#��H�2 ���"���1�����)� ����#�.��F�����#��2 ���"���1�������#�.��%%%��������� �������#����#���2 ��#�5���+��#�"����#��+���

A� "���� �����3

. ��* �����#����+����#�������#"��$ ���+����#�������#"��

Generating Single-Level Master Schedules

4–19OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Document Types Tab

���������"�����#"����#�. "����+�� #��������#�#����

1. Purchase Orders

������������"���������� �#���#����������������#"����#�"��������##�����" ���������#�����+�� #��������+�� #��� ���"��2�

2. Work Orders

������������"���������� �#���#����*��������#"����#�"��������#�#����" ���������#�����+�� #��������+�� #��� ���"����

3. Rate Schedules

������������"���������� �#���#���#������� �����#"����#�"��������##�����" ���������#�����+�� #����#��#���;�����0����+�#����������#�#����+�#����#������� ��#��#��������#�#�����

Leadtimes Tab

;���+�#�� ���#"���#��� ����=#��#"���+���� ���"�����"�#��������#"����;�����������#��+" #����#������#���������

1. Purchased Item Safety Leadtime

1��"#����"#��#��*"���#����2��#�������������#����� ���������#������#��#��"#��H� ��� � ���#"���#���� �� �#��#���#�#� � ���#"���

2. Manufactured Item Safety Leadtime

1��"#����"#��#��*"���#����5��#�������������#����� ���������#������#�#���"#��H� ��� � ���#"���#���� �� �#��#���#�#� � ���#"���

3. Expedite Damper Days

�=���"#�������������������#�#"������#��������#"���#�#���#��������#"��"���+��#������.���+�����������#������

4. Defer Damper Days

��+�������������������#�#"������#��������#"���#�#���#��������#"��"���+��#������.���+�����������#������

Manufacturing and Distribution Planning

4–20 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Performance Tab

���������"�����#"�����+"�����#��#������"�������������������"��#"���

1. Clear F3411/F3412/F3413 Tables

;��#�"�����"�����#"����"#���=#�������#"��I�-+�������#��$�������"��#��52�05)20�)2�5�����#�. ��71 :$$9��52�05)20�)2�<����<��� �)�@�"����#72���"��9�#�. ��71 :$�9������52�05)20�)2��������7�"�����"�9�71 :$ 9#�. �����������

(����#��#�"���������� ��.�� "�"#����-+��� #"� ��������#�"�������������# ���"#��#�"�����"�����#"����#�#��$��������� ��*������ #���������#����� �#������"���

A� "���� �����3

. ��* �����#�� ���#�. �$ � ���#�. �

2. Initialize MPS/MRP Print Code

-+�������#��$�"��#�"�����"�����#"����#���������"�"#"� "G������������"�#���-#���6�����#�. ��71:$��9�.���##"���#���-#����"� ��������75)2�9�#�. ��*�

-+����� �����#�"�+"� ��. ��*������"���#"���"���������.�#�#���5)2��+"� ��+��� ��#���"#���"��#�����#��� ��#"����������#���������#����" ���#�� ���#�������"��#���-#���6�����#�. ��71:$��9������� ������#��#����"#���"��#����#��� ��#"����#��"#����$�������

)���� ���+����������#�#�"�����"�����#"����+�������"#���"��#�����#�� ��#"���#���5)2��+"� ��"�����#�����+� ��3

� $�"+�������������#����#��

� ��"+��������������#��

����2"�#�5�#��2����#"��������� ��������7) :4�9�� �������#����#����#�� ��#"���.�������#���5)2��+"� ��

A� "���� �����3

. ��* �����#�"�"#"� "G��#���-#���6�����+" ��$ -�"#"� "G��#���-#���6�����+" ��

Generating Single-Level Master Schedules

4–21OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

3. Messages and Time Series for Phantom Items

;��#�"�����"�����#"���#�����"+�����#���#��������������#�����������#"����"��+������#���"#���

A� "���� �����3

. ��* �����#������#�$ �����#�

4. Ending Work Order Status

;��#�"�����"�����#"���#�����"+��#�����*�����#�#���#���"�������������� ������=� �����#����������#��-+����� �����#�"�+"� ��. ��*��� ����������=� �����#����������#�

5. Extend Rate Based Adjustments

;��#�"�����"�����#"���#�����"+�����#�����/�#���#�+���#��.����"#������=� �����#����������#��#���.�����#"���������+��#�����������#�

Manufacturing and Distribution Planning

4–22 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

A� "���� �����3

. ��* �����#��=#���$ �=#���

6. Closed Rate Status

��#��#���#�#���+�� �����#��������� ���"���+�����#��.����"#����#��������������#����"����#�������#�#�"�#�#�����"����

Process Mfg Tab

-+�����������������+��#�"������#��$�#�������#��#���� ���.�������#��+����#��+�#�����C0.�C�����#�+��#�������������������#�������#�������+��#��������

1. Process Planning

-+�����������������+��#�"������#��$�#�������#��#���� ���.�������#��+����#��+�#�����C0.�C�����#�+��#�������������������#�������#�������+��#��������

A� "���� �����3

. ��* �"��#�$ ����

Parallel Tab

���������"�����#"������"+��#������.���+�������#��#�#����#�������"������ � �����"�����������#"���� �����"+�����#���#����#�����������"�����"������ � �����"���

1. Number of Processors

;��#�"�����"�����#"���#�����"+��#����+����.���.�#���"��������������+�� #�"���7G��9�

2. Pre processing

;��#�"�����"�����#"���#�����"+�����#���#����#������������"����"������ � �����"������"���������"����#����#�������*���� ����������������� ����� ��#���"#����"#�"����� ��������������2�����"��"��������+�������������������5)2�����"��� "���� �������#������.���+"#�����#�� ��� ������"� ��#����#���#�#� ����.���+�"#���"��#�����#�� ��#"����A� "���� �����3

Generating Single-Level Master Schedules

4–23OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

6 ��* �����#���������#����������"���$ �����#������������"���

Reviewing Items for Net Change

;��#���D�#��������)��"���������#����"���"#���#��#����������������"#��#��������#�"��� ����������� ��������#"�"#"��#�������#�#���5���+��#�"�������"#".�#"���2 ���"����#����>������� ���#����� ��#���������+�"#���.�� ��������.���� ���"���+��" ���.����0� ��#���������"+"��� ���"���������>������������ �#���#"����"���"����#������������� "���"�+���#"���+���+������+�#���"#����

-+����"#���������������"#����������#���D�#��������)��"���+����"#����>�"�#���D�#��������+"� �������+� ��"��� "#�"���#"+"��#���������#��#���#���#"�� �

��#"��#��#�����#��������+ ��3

�����9���*�%������ (������"#"���������������� �#"�����#"��#��#���+ ���+��#��#

"#����-+���.������������+�����"#����#����#�������#�

.�#��� ���������� ���#"���

�����9�������������� (���� ��#"�����#"��#��#���+ ���+��.�#��#���� ��#���"#��

����#���"#���.�"����.#"#�#���

"�� -����/���� (������"#"������� �#"�����#"��#��#���+ ���+��#���"#����-+

��������������@��#���#��+�����"#�����@���#"#���#��

�#�����#"��#��#���+ ���+��#���"#����-+����"#���#�#�

�������#��%%������#���@���#"#��������"���#��@�� �#��#��

@���#"#������ �#����#����#�����#"��#��#���+ ���+��#��#

"#����-+���.������������+�����"#����#����#�������#�

.�#��� ���������� ���#"���

"�� -������%������

������

�� �����"�����#"��#��#���+ ���

"�� -������%������

����������

-+����"#���#�#���������#��%%������#���@���#"#�������

������#��@�� �#���@���#"#������ �#����#����#��

��#"��#��#���+ ���+��#��#�"#���

��%��������C�������� �����#�����#"��#��#���+ ���+������"#��������"����#��

���.������/�#���

��%������ �������� �����"����#���"�#��+����+�������.�����#�����#���

#����#�����#"��#��#���+ ���+��#����++��#���"#���"��.�#�

���#"���

Manufacturing and Distribution Planning

4–24 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

.�����,��������,����� (������"#"������� �#"����+�����������#�"#�����#"��#�

#���+ ���+��#�������#��+�#�������������������#��-+�#��

"#����@���#"#��������������++��#"�"#����#���������+�

������������#�"#����#����#�����#"��#��#���+ ���+��#��

����#��+�#��#���������#�

,������"����7���

7����

(����������#������������#�"#�����#"��#��#���+ ���+��#��

����#��+�#�������������������#�

$�����,������*�%��' -+�����#�*����#"�����������������������#���@���#"#��

#�#���#������@��#���#����������#����#�����#"��#�

#���+ ���+��#���"#����-+�����#�*����#"����������=���"#���

��+������������#��������������#�#���#���

������������@��#���#����������#����#�����#"��#�

#���+ ���+��#���"#���

��������*�%������ (������"#"���������������� �#"�����#"��#��#���+ ���+��#��

"#���

,������������$���

*�%������

(������"#"���������������� �#"�����#"��#��#���+ ���+��#��

"#���

*����-��D��������� (����#������ �#�������"##���@���#"#���+����

��������#�"����#��������*�����#��#��������#�#�

�@�� �#��#���#�#��"��"��#���"��#�������"�����#"��

7��� ��#�#��%%9���������#���#"��#��#���+ ���+�����

����� ���"����#���

9�������*���� ��"�������������������"#"�� �����+��#�"�����#��"�

#���-#���6�����#�. ��71:$��9��-+����������#���+ ���"

����#���+�����"#���

�����-����/���� (������"#"���������������� �#"�����#"��#��#���+ ���+��#��

"#���

��������-����/���� (������"#"���������������� �#"�����#"��#��#���+ ���+��#��

"#���

E��������*�%��' (�������� �����#��#��#���D�#��������+"� ����#"��#��#��

+ ���+��#���"#���

Generating Single-Level Master Schedules

4–25OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

(��"#"��� �������#����#"���#��#���������������"����� �������������"��#�����=#�5)2��������#��#�����#��������+ ���"��#���-#���6�����#�. ��71:$��9��=��� ��"�� ���3

� >��������#�*�����#"�������������������������"#���#���@���#"#���#�#��#������@��#�����#���������

� >��������#�*�����#"����������=���"#������+�������������#�������������#�#���#����������������@��#�����#��������

� >�������� ��������

E���F�>�����������#��#�����#��������+ ���+���#���D�#��������)��"�����������#�#������"#�������#��#��#��� �������"�#�������� ��������#�����#������ "�������"�������������

���%��'�����������������

1���#���2�"��"���"�� ���"#��2 ���"��������78 :��9��������D�#�������)��"���

�����*��"#��D�#�������������������� �#��#���+� ��"���+"� ������ "�*�1"���#�� ���#��#���"#���#��#��" �.��"�� �����"��#�����=#���#������������#"��3

� 6����02 ��#

� 5�#��2 ���"���1��" �

Manufacturing and Distribution Planning

4–26 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Processing Options for Net Change Review

Defaults

Enter Planning Code or a blank for All

1. Planning Code ____________

Generating a Master Schedule for Selected Items

1���#���2�"��"���"�� ���"#��2 ���"��������78 :��9���������)2���52��D�#�������

�)2�����52����#�����������#�������.�#�����������#����)2�����52�������#"����;��������"�����#"���#�����"+����#���������>�������+�#����+"���#�����#��� ��#"���#��"�� ������ �����"+"��"#���#��#����������#���D�#�������)��"���+�����������������)2�D�#����������52��D�#���������#���#��3

� ��� ��#��� ��#���"�+���#"��

� 2�+����� �� �#"��

� 8����#����#"����"������������+��#���� ��#���"#��

�����#���� ��#�"#���+���D�#��������)��"���.�������#���+� ��"���#����+���#"�"#"�3

� 6" ��+���#�"� �������

� -����#���#����#"��

� 1����#���/�#���#

� ��*�����������

� 2����������������

� <���#"���� ���#��#��� #�"������ ���#"����� ��

� �� ������������

� �������"������#������@�"����#

>������ �����D�#���������������� ��.�"�#�����#"��� ������#���������� ��������������"#��#��#���(�#"���5������2���"���������"�����"�#�. ���>��������"���#���"�+���#"���#��#�"������#���.��#�"��������� "���.��"���#���#"����"��������������"���������

See Also

� ����������������'���������������� �+��#�������"�����#"���+�#�"������

4–27OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Reviewing the Time Series

;��#����)2���52��#"����"��"�@�"��������#����"���#�����#������� ��������"������#���#�������#�#���� ���"���#��#�#����#�������#���#����"���"#��������#���"� �����"���"����+���#�����#�����#������#"�������#�����������>������ ����"���#�����#"���������+��"��"�"��� �"#������.�#����#��"�����"�����#"����"+������#��#�*���;������"�����#"���"��#���)2052�������#"���������#���#������" ������* ��������#� ��#"�����"��7.��*�#9��

�����"���#���#"����"������� �#�������+�#���+� ��"���#�*3

� )��"����)2�#"����"�

� )��"���52��#"����"�

����+� ��"��� "#����".�������+�#�����#"���#�"�+���#"������.�#��#����)2��52��#"����"�3

D�������������������

����������

>���������"���#���+� ��"��3

� �"��C������"����#�����#"�"#��"��������"#��+������� (��" �. ��#�����"��@���#"#"��"�������� "����"#��+

������ �"���+���������#��� ���#"����#�#���"#��� ��� � ���� �#"�����������+��#�"��� ���#"�����������

��C�����������C�����

�����+���������

2�"���@���#"#"������"#�����/�#���������/�#���

������ �� �#"���+����/�#���@���#"#"�������#��#�#��

����" ������#���������

������ �� �#"���+������/�#���@���#"#"�������#��#�#��

����" ���#������#�����#"��������������;��#�#��

�����+���@���#"#��#����"��"��#��#��#���"���@���#"#"����

����/�#���

)�+��#��#��� "#��+�@���#"#��#����+� ��"���#�"�#�. ��+���

��+"�"#"����+��������"���@���#"#��#����

Manufacturing and Distribution Planning

4–28 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

������������������ ��������������� ���"���#"���+������ ��#��#��� �� �#�

#������"������" �. ��#��#�"�.�������#������#���+

+����#�����#������������������� ��8�������F��#��

+����#�"����������K�������L������#��#�#���+����#

"��������.��#��������#��+�#�����#�����������"��#��

������"����

?������������������� >��������"� ���#���#"����"��"���"++���#�+���#����

��#���+� ��"��3

� �����"G��� �������� "���"�#������������� "��� �����"G��� ���� �� "���"�#��������� �� "��� ����������+�"�+���#"���#��� ��#�������� ���� ��.�#�����#����"++���#�@���#"#��#�������#���

"��#�������"�����#"��

�������������

�������

>�������������#�����������" ����"��"���#���#"��

�"�3

� ���� �0�������-�@�"������2���"���-�@�"��#���#��"���������"���� ��� �����������.�"�������#��

� 5�����1" ��)��""���#����"�����������#�" ����#�*�����������"�#����#"��

� 5���+��#�"�����#��)��""���#����"+��"#����#����#�"

� ��#�" �1����#�)��""���#����"���"#���+����#����� ���"#��

� )�#�������� ��)��""���#����"���"#����#������� �� 52�����)2������#"���#���������� "���������#"��

+��#����"� �����"#��

DRP Quantity Types

����+� ��"���#�. �� "#�#����� "��@���#"#��#�����������"�#"���+���)2�"������+"���������#�. �� :0�)3

@.� O�6��"��"���(��" �. �

@�* O�-��)���"�#�)��#"��

@�- O�2���������

G9/H� '��<�#��=�"��

G��� '�52�01����#

G���� '���"�����E���#"#�

G�- '��� �����

G�$ '�-�#�� ��#�������

>/� ?����"���(��" �. �

@$*� O��"#".�#"���)�@�"����#�2 ��

� � (��" �. ��#��2��"�

�� � ���� �#"���(��" �. ��#��2��"�

Reviewing the Time Series

4–29OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

(+#���������#���52�������#"����(�2�����(�2;�#��#������������#"����� ��������. ��*����#����"�����"�0(�2�-�@�"��+�����=���#�+��#���+"#���"����-+(�2;�"�����#"���"�"���#���� ���"���#"���+������#����#����#����"� ���#���� #"����(�2;�����#���"#�"���"#"���������#"����"��� ����"���#"�����"���������(�2;�"��@�� �#�������"���#�#� ��+�(�2;��#����� �� �#"��������#��##�����������#���#������#����������

MPS Quantity Types

����+� ��"���#�. �� "#�#����� "��@���#"#��#�����������"�#"���#��#�����+"����+��52��"�������+"���������#�. �� :05�3

@.�7 O�6��"��"���(��" �. ��7;���/�#��9

@.� O�6��"��"���(��" �. �

@�* O�-��)���"�#�)��#"��

@�-7 O�2����������7;���/�#��9

@�- O�2���������

@"-7 O���*�����7;���/�#��9

@"- O���*����

@*�7 O�)�#�������� ��7;���/�#��9

@*� O�)�#�������� �

G9/H� '��<�#��=�"��

G���7 '�52�01����#�7;���/�#��9

G��� '�52�01����#

G���� '���"�����E���#"#�

G�-7 '��� ������7;���/�#��9

����������#����#���#"����"��"�@�"��������������#�������������+"��������#�. ��+��#���@���#"#��#���������������#��������"�#������"�����#"��#���"� ���#�"�����#�. ���>�������� ���������"�����#"���#���"� ���#���"++���#�#�. �����������/�#�����������/�#���@���#"#"��

�����#�. ���"� ����� ��"#���#��#������#"���#�#��"#���� "��#"����1���=��� �������+"���������#�. �� :0�)��"� ����� ����#��"#���#��#���� ��#���)2�"#���-+�#��������"���#���+"����"�������+"���������#�. �� :0�)��"#�������#���������#����)2��"�����"�0(�2�-�@�"��+��������#���)2�����52���� �� �#"�������#��++��#���.��#��������������+�#�"������

-+����������#����"+������#"�� �������+"��������� "#��� �@���#"#��#����"� ����F�������#���#"����"���� �� �#"���"���#��++��#���.��#���@���#"#��#���#��#������#���#"���#�#��#������ "��#"���

See Also

� !��"���#���&�� �'(������+��"�#��#"�����������"���#��#��������+���#���#"����"��"�@�"��+��

Manufacturing and Distribution Planning

4–30 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

���%��'$*�����������

1���#�����" ���)2�����#"��������78 :$$9���������)2��"�����"�0(�2-�@�"��

$� �����*��"#���"�����"������� �#��#���+� ��"���+"� ������� "�*�1"��3

� 6����02 ��#

� -#���D��.�

�� ����������#����"� ���������������+�#���+� ��"�����#"�������� "�*�1"��3

� ������6 ��*�<"��

� �����"G������ ��������

� ( #���#��E���#"#������

� �����������"#"��� �+����������+���#���1��������

Reviewing the Time Series

4–31OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

���%��',������������

1���#�����" ��52������#"��������78 :$�9��������52���"�����"�0(�2-�@�"��

$� �����*��"#���"�����"������� �#��#���+� ��"���+"� ������� "�*�1"��3

� 6����02 ��#

� -#���D��.�

�� ����������#����"� ���������������+�#���+� ��"�����#"�������� "�*�1"��3

� ������6 ��*�<"��

� �����"G������ ��������

� ( #���#��E���#"#������

� �����������"#"��� �+����������+���#���1��������

Manufacturing and Distribution Planning

4–32 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Processing Options for DRP/MPS Time Series (P3413)

Defaults Tab

���������"�����#"���� �������#�����"+��#����@�"�������� #���#��;��#����+��#���#"����"��������"�#"���"��#����"�����"��������72 :$ 9�

1. UDC Type (Required)

;��#�"�����"�����#"���#�����"+��#���;��������"���#��� :�+��#��� "#��+������"�#"���#��#����������#���#"����"���-+����� �����#�"���#"���. ��*�#����#������#���@���#"#��#���������7E�9�

2. Alternate UDC Type (Optional)

;��#�"�����"�����#"���#�����"+��#���;��������"���#��� :�+��#��� "#��+� #���#��������"�#"���#��#����������+������"�#����"#��#����"�����"�������72 :$ 9��������#���( #���#��E���#"#���������#"���#���"� ���#��� #���#��������"�#"����-+����������#�����*������#"����#����#���������#�"� ���#���� #���#��������"�#"���

Process Tab

���������"�����#"���"���#"+�����#���������#���"�+���#"����" ��"� �����#����"�����"��+����>����������������"+"����#���������+����#������#"�����"����(��"#"��� �����������������#������"G����� ��������������#��"�#����"�� �����

1. Past Due Periods

;��#�"�����"�����#"���#�����"+��#������.���+���"���#��#�#����#���"� ����"��#��#���5)2������#"���#�#���#�����#���#"����"���A� "���� ����3

� ����"���7��+�� #9��"��#��#���5)2������#"���#�#���#�$ ������"����"��#��#���5)2������#"���#�#���#�� #�����"����"��#��#���5)2������#"���#�#���#�

��"��� ������ �����������"#��#���5)2�8����#"���7) :��0) :� 9���#������"����-+�#���5)2�8����#"������������������#�������"����#�"���#"����� ��.���#�#������

2. Summarize Supply and Demand

;��#�"�����"�����#"���#������"G����� �� "���"�#����"�� ��������������� "���"�#�����#���"�� ��������+������"�#����"#��#����"�����"�������72 :$ 9��A� "���� �����3

Reviewing the Time Series

4–33OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

6 ��* �����#���������#�����"G����� ������������� "���"�#��"�� ����

$ �����#�������"G����� ������������� "���"�#��"�� �����

3. Forecast Consumption Periods

;��#�"�����"�����#"���#�����"+�����#���#����#���"��"��#��#���+����#������#"�����"���"��#����"�����"��������72 :$ 9������5)2���+����#�������#"����A� "���� �����3

6 ��* �����#���������#�"��"��#��#���+����#�������#"�����"���$ �����#���"��"��#��#���+����#�������#"�����"���.��� ��"�����

�#�"*���=#�#��#�����#��

Versions Tab

���������"�����#"���� �������#�����"+����"����+����#�����������������"�� ��-#���5)2�7) :��9�����5)2���#�" �5�����)��"���72 :$$9�#��#���������#�������������+����="#�+���#����"�����"��������72 :$ 9�

1. Single Item MRP (R3482)

;��#�"�����"�����#"���#�����"+��#�����"����+�#����"�� ��-#���5)2������7) :��9�#��#�#����#��������������������"#�+���#���+����="#���#�����*��"#���"�����"��+����-+����� �����#�"���#"���. ��*��#����#�����#���U������$���"���

2. MRP Detail Message Review (P3411)

;��#�"�����"�����#"���#�����"+��#�����"����+�#���5)2���#�" �5����)��"���������72 :$$9�#��#�#����#��������������������"#�+���#������="#����#�����*��"#���"�����"��+����-+����� �����#�"���#"���. ��*��#���#������#���U������$���"���

3. Supply and Demand Inquiry (P4021)

;��#�"�����"�����#"���#�����"+��#�����"����+�#������� ������������-�@�"��������72:��$9�#��#�#����#��������������������"#�+���#���+���="#����#�����*��"#���"�����"��+����-+����� �����#�"���#"���. ��*��#���#������#���U������$���"���

4. Forecast Revisions (P3460)

;��#�"�����"�����#"���#�����"+��#�����"����+�#���1����#�)��""��������72 :&�9�#��#�#����#��������������������"#�+���#���+����="#���#�����*��"#���"�����"��+����-+����� �����#�"���#"���. ��*��#����#�����#���U������$���"���

Manufacturing and Distribution Planning

4–34 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

5. Pegging Inquiry (P3412)

;��#�"�����"�����#"���#�����"+��#�����"����+�#���2���"���-�@�"�������72 :$�9�#��#�#����#��������������������"#�+���#���+����="#����#�����*�"#���"�����"��+����-+����� �����#�"���#"���. ��*��#����#������#��U������$���"���

6. Rate Schedule Revisions (P3109)

;��#�"�����"�����#"���#�����"+��#�����"����+�#���)�#�������� ��)��""��������72 $�%9�#��#�#����#��������������������"#�+���#���+����="#���#�����*��"#���"�����"��+����-+����� �����#�"���#"���. ��*��#����#�����#���U������$���"���

7. Work Day Calendar (P00071)

;��#�"�����"�����#"���#�����"+��#�����"����+�#�����*������� ����������72���!$9�#��#�#����#��������������������"#�+���#���+����="#���#�����*��"#���"�����"��+����-+����� �����#�"���#"���. ��*��#����#�����#���U������$���"���

8. Item Branch (P41026B)

;��#�"�����"�����#"���#�����"+��#�����"����+�#���-#���6����������72:$��&9�#��#�#����#��������������������"#�+���#���+����="#����#����*��"#���"�����"��+����-+����� �����#�"���#"���. ��*��#����#������#��U������$���"���

4–35OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Working with DRP/MPS Output

(+#�����������#���)2052����#��#��#����#������#����#"���������#��#3�

� ( �#�#�����#������� ���+���". ������������"#"��

� �"� �����#"������������#"���#��#�#�����#������� ����������

�����#����"� ���������.��#�����>�������"���#"+����"���"#����@�"��##��#"���.�������#���+� ��"���������#���3

� ���"���5����

. ���������=���"#�

� �����

$ ��+�

/ �=���"#�

� 1�G��

! -����������E���#"#����

� �������)�#��E���#"#����

� -������)�#��E���#"#����

9 �����������E���#"#����

, 5���� �)��"���

E ���#��)�#�

- ���

� 1"�����

� 12��(�/�#���#������#"��

2�#��������

Manufacturing and Distribution Planning

4–36 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

��*"����"#���)2052����#��#����"#��+�#���+� ��"���#�*3

� ��*"����"#�������

� (��"�����+��G�������#��������������

� (��"�����+��G�������#������*����

See Also

� �������1�-��������������+������"�+���#"���������#������������#����#���������������

Working with Messages

>������������ ����"�������������������"���#�����#�" �5����)��"�������������#���#"�� �������#����������"���#�����#�" �5����2���"���������

��*"����"#�����������"#��+�#���+� ��"���#�*3

� )��"��"�����#�" ������

� 2���"�����*����������

� 2���"�������������������

� 2���"���������+����� ���"���+��" �

� 2���"�����������#���#"�� �

� 2 ��"�������������� �

� � ��"��������

;��#�������"�����#"���+���)2052�05)2�#�����"+��#�����+�� #��� ���+�#�������#����#��#������������#�" �5�����)��"���

������#"���������+���)2052�05)2������+"����"�������+"���������#�. � :05������������#��������������������������#��������#��������#������"��#�"� "#�

�������3�������"������#�������"G�#"����+��������������#����������*"���"#��#����)2052�05)2���#"������������ ������"��#���"#�������1 ����2����"��������� �.�+���#�*"�����#"�������������++��#"�������#���#�

Working with DRP/MPS Output

4–37OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Reviewing Detail Messages

(+#�����������#���)2052���������"���#�����#"���������+��#���"��"�"��� "#������.���(+#��������"�������������������������+��������+�#��+� ��"��3�

� 2 ����#�������������� �

� � ���#��������

� �� �#��#��������

>��������� �#������������#��#������������"�����.�#��"����#������

� 2����#��������

���%��'��������������

1����)2���" ������#"���78 :$$9���������)2���#�" �5�����)��"���

$� �����*��"#����#�" �5���������� �#��#���+� ��"���+"� ������� "�*1"���#�� ���#��#���������+��#���"#��3

� -#���D��.�

� �������6����

�� )��"���#���+� ��"���+"� �3

� 5�����

� 5����

Manufacturing and Distribution Planning

4–38 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

� ����D��.�

� ����

Processing Options for DRP/MPS Detail Message Revisions

PO Info Tab

;��#��������"�����#"���#����+"��������������"�+���#"���

1. Line Type

;��#�"�����"�����#"���#�����"+������#����#��������� "�������#����#"�������� "���#�����++��#�#����#����"#����"���#���#����#"��"�#�+����78���� �<��������.���#��(�����#�2���. ���(�����#�)���"��. ������-����#���5��������#9������ "���#����� �����"+"��#�������"#"���+�"�� ��"����� "���������#�����"���� �� �#"����������=��� ���+��� "���� �����"��������.������+"�������#���<"�����������#��#�)��""���+���72:���49���3

� �#��*�"#��� ��.���#���.���#��#���������"���#��#���8���� �<����6 80<�������#�����"#������.�D D��C#��*�"#��1 1�"��#� ��=#�"�+���#"��5 5"�� �������������������"#� ��*����

2. Beginning Status

;��#�"�����"�����#"���#��"��"��#��#���.��"��"���#�#�����"���"�#���+"#�#��"��#�������������>�����#����"+���������+"���������7:�0(�9�#��#���.�����#�������#�������(�#"�"#��)� ��+���+��#�������#��������#��� "���#���#��#���������"���

3. Consolidate

;��#�"�����"�����#"���#��"��"��#�����#����������#�#������ "��#��� �������������#��#���� ��#��������� "��������������������

Working with DRP/MPS Output

4–39OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

A� "���� �����3

$ ���� "��#��������6 ��* �����#����� "��#��������

WO Info Tab

;��#��������"�����#"���#����+"�����*�����"�+���#"���

1. Beginning Status

;��#�"�����"�����#"���#�����"+��#��������+"���������7��0��9�#��#�"���#"+"�#�����+�� #�#�#���+�#�����*�����#��������������*�����"����#���

2. Canceled Orders Status

;��#�"�����"�����#"���#��"���#"+��#�����+�� #������+"����#�#������7��0��9�+��������� �����*�����

OT Info Tab

;��#�"�����"�����#"���#����+"���#��+������"�+���#"���

1. Consolidate

;��#�"�����"�����#"���#��"��"��#�����#����������#�#������ "��#��� �������������#��#���� ��#������.����0� ��#��������#��+������

A� "���� �����3

$ ���� "��#��������6 ��* �����#����� "��#��������

Blanket Info Tab

;��#�"�����"�����#"���#����+"���. ��*�#�����"�+���#"���

1. Blanket Order Document Type to Release

;��#�"�����"�����#"���#��"��"��#�����#����������#�#���������#����+�����"�#���#"���� �������"�#�����#��"���. ��*�#��������������"��������#�����#�������������

� ��#�����������#�#����#��� �������"�#�

� -+����� �����#�"�+"� ��. ��*��#���������������#�� �������"�#��. ��*�#�����

Manufacturing and Distribution Planning

4–40 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Versions Tab

;��#��������"�����#"���#����+"������#���"���#����������#�"���������������#���������

1. Blanket Order Release (P43060)

;��#�"�����"�����#"���#�����"+������"����+�#���6 ��*�#�����)� ���������������#����� �#�"���"�����������������6 ��*�#�����)� ���+���#�"�������

�������������������"������"���#�����"��H�����"�����#"���#������#��#�#�����"������#������@�"����#�

2. Time Series (P3413)

;��#�"�����"�����#"���#�����"+������"����+�#����"�����"�������������#����� �#�"���"�������������������*��"#���"�����"��+���#���1��������+���*��"#����#�" �5���������#�" �5�����)��""���

�������������������"������"���#�����"��H�����"�����#"���#������#��#�#�����"������#������@�"����#�

3. Pegging Inquiry (P3412)

;��#�"�����"�����#"���#�����"+������"����+�#���2���"���-�@�"�������������#����� �#�"���"�������������������*��"#��2���"���-�@�"��+��#���1���������+���*��"#����#�" �5���������#�" �5�����)��""���

�������������������"������"���#�����"��H�����"�����#"���#������#��#�#�����"������#������@�"����#�

4. Supply/Demand Inquiry (P4021)

;��#�"�����"�����#"���#�����"+������"����+�#������� ������������-�@�"��������������#����� �#�"���"�������������������*��"#����� �������������+���#���1���������+���*��"#����#�" �5��������#�" �5�����)��""���

�������������������"������"���#�����"��H�����"�����#"���#������#��#�#�����"������#������@�"����#�

5. Purchase Order Entry (P4310)

;��#�"�����"�����#"���#�����"+������"����+�#���2���������������������#����� �#�"���"�������������������*��"#��������#�" �+���#��)���������+���*��"#����#�" �5���������#�" �5�����)��""���

Working with DRP/MPS Output

4–41OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

�������������������"������"���#�����"��H�����"�����#"���#������#��#�#�����"������#������@�"����#�

6. Work Order Entry (P48013)

;��#�"�����"�����#"���#�����"+������"����+�#�����*�����2���"��������������#����� �#�"���"�������������������*�����2���"��+���#�"�������

�������������������"������"���#�����"��H�����"�����#"���#������#��#�#�����"������#������@�"����#�

7. Rate Schedule Revisions (P3109)

;��#�"�����"�����#"���#�����"+������"����+�#�����#�0�������)�#������� ��������������#����� �#�"���"�������������������*��"#�)�#�������� ��+���#���1���������+���*��"#����#�" �5���������#�" 5�����)��""���

�������������������"������"���#�����"��H�����"�����#"���#������#��#�#�����"������#������@�"����#�

8. Transfer Order Entry (P4210)

;��#�"�����"�����#"���#�����"+������"����+�#����� ��������#�������������#����� �#�"���"������������������� ��������#��+���#�"������

�������������������"������"���#�����"��H�����"�����#"���#������#��#�#�����"������#������@�"����#�

9. Scheduling Workbench (P31225)

;��#�"�����"�����#"���#�����"+������"����+�#���5���+��#�"��������� "����*.�����������������#����� �#�"���"�������������������*��"#���*����������� "���+���#���1���������+���*��"#����#�" �5��������#�" �5�����)��""���

�������������������"������"���#�����"��H�����"�����#"���#������#��#�#�����"������#������@�"����#�

10. Bill of Material Inquiry (P30200)

;��#�"�����"�����#"���#�����"+������"����+�#���6" ��+�5�#�"� �-�@�"�������������#����� �#�"���"�����������������6" ��+�5�#�"� �-�@�"�+���#���)���������+���*��"#����#�" �5���������#�" �5�����)��""���

Manufacturing and Distribution Planning

4–42 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

�������������������"������"���#�����"��H�����"�����#"���#������#��#�#�����"������#������@�"����#�

11. Item Branch (P41026)

;��#�"�����"�����#"���#�����"+������"����+�#���-#���6����������������#����� �#�"���"�����������������2 ��#�5���+��#�"�����#��+���#��)���������+���*��"#����#�" �5���������#�" �5�����)��""���

�������������������"������"���#�����"��H�����"�����#"���#������#��#�#�����"������#������@�"����#�

Display Tab

;��#�"�����"�����#"���#�����"+�����#���#���"���������+��������.����0� ��#������ ��.����0� ��#�

1. Viewing Messages For

;��#�"�����"�����#"���#�����"+�����#���#���"���������+��������.����0� ��#������ ��.����0� ��#�

A� "���� �����3

$ A"���������+����� ��.����0� ��#�6 ��* A"���������+���������.����0� ��#�

Processing Work Order Messages

(+#��������"���#�����������������������#���������������������*�����������#����#������#����*�����������"��#�����*����5�#��#�. ��71:��$9������"�����*��������.���D����#� "#�����#"���##������#�#�"�#"����

>��������������*������������"���#���+� ��"�����#���3

� 2������"�� ����#"���������+�����"#��

� 2������ #"� ����#"���������+�����"#��

� 2�����������"������ ���"���+��" �

� 2������������#���#"�� �

�����#���+"#���������*������������������#������� �����"�+"����������#��������+���#���.��"��"�����#��#������#���������#��#��#�#���#���������#������*�����������������+"�������" ���#�.���#���#"�� ���� ������"���.�@���#�52�������#"����F�������"+�#���.�@���#�52�������#"���+"������"��#���.�#�����#������ ��@���#"#"���

Working with DRP/MPS Output

4–43OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

��#������#����������@���#"#"������#���#�������������������� "�����#�+�#����="#"�����*�����

������������+"=�������@���#"#��71�E9��52�0�)2�������#������#����-������������+������="#"�������#���������������-�#�����#����#�������#������������"���� #"� ���+�1�E����������#�������#����������

������������#��������#���������������������"+��#���#�#���+�#�������#�"��"��#��#���#�����+������#"���������������#��������#�#��"��#����#�#��+"� �������#����"� ���#�"�+"� ���� ��+��������#��#����� �#���#���������"���

�������'�� �������������

1���52����" ������#"���78 :$�9��������52����#�" �5�����)��"���

$� �����*��"#����#�" �5���������� �#��#���+� ��"���+"� ������� "�*1"���#�� ���#��#���������+��#���"#��3

� �������6����

� -#���D��.�

�� ������#���������#��#��������#�#�������

� 1���#���)���������������2����5�����

:� ����"���#���������#��#�������������������2������5����+���#���A"��������

Processing Purchase Order Messages

>��������������������������������"���#���+� ��"�����#���3

� 2������"�� ����#"����������"#���#�. ��*�#���������*"�������� "��#"��

� 2����������������#"����������"#��. ��*�#���������*"��

� 2�����������"������������������ "��#"���#��"�� �������#��������"#������������������

� 2����������������������"������ ���"���+��" �

� 2�����������"���#������� "�������� "����#��

��������������������#��#������#�������"++���#���"����+���*��"#���#�" �5�����+��������+�#������"�����#�����������"++���#���"���=���"#������������"�������#�"���#����������"���#���������"�� ���#"����������"#���#�. ��*�#���������*"��������� "��#"�������#�����"��#�������������������#"����������"#��. ��*�#���������*"�������������

���� �#��#���+� ��"���#�*3

Manufacturing and Distribution Planning

4–44 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

� 2������"�� ����#"��������

� 2�����������"������� "��#"��

� ����� �"#������������������

������"���������������#�#�������"�����#"���+��#����)2052�������#"���������#������������#���"#�������������@�""#"���7�������#�#�����)9���������������7�������#�#�����29������������"�� ���������-�����#��������������������#����#�����#����#�����#��#��#�#�������������������#���

-�����"#"����#������������#��#��������������"��#��������"�����"#��+������������#������#�����#"����������"� ���#����"������"#��+�������������������*��#��������"�#����"#��+������������"����(+#��#�����=#�)2052��������#"����#���@���#"#"��#��#�������"�#����"#��������������������"��#���#"����"���"� ������#���O2��@���#"#��#�������

���������������������#����#���+"��#��#���#"����+�#����)2052��� ��"����#�� ������.�@���#��)2052��������#"����" ���#��������#��#"�"�����@���#"#"�����"�#����"#�����"�� ����������������F�������"+#�������������#"���+"������"��#���.�#�����#������ ������������@���#"#"������#���#���������"�������������������"����� "�����#��+#����="#"���O2��

See Also

� ����������(�����

� ����������'�������'���������+��"�+���#"����.��#�����"���������"���#�"��#��

���������������������������

1���52����" ������#"���78 :$�9��������52����#�" �5�����)��"���

$� �����*��"#����#�" �5���������� �#��#���+� ��"���+"� ������� "�*1"��3

� �������6����

� -#���D��.�

�� ������#���������#��#��������#�#�����������#����������2���5����79�+���#���)��������

E���3�-+����"#���������#����������� "���"�����#��"#��#����#���"� ������������������#������� "�����.������� "�*��T�

� � "�*�� ���

Working with DRP/MPS Output

4–45OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

:� ������� "���� ��#���+�������������8����#�����79�+���#���1�������

4� ���8����#���2������������ "�*�� ���

&� ����"� ���#���������#��#�����������������*��"#����#�" �5�����������2������5�����+���#���A"��������������#����"������������������.�������"� ���"#�"��#�������D��.��+"� ��

Manufacturing and Distribution Planning

4–46 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

���������������������������������

�����#������#������������������������"#�����������#�" � "���"#��������������#����������#��#����������-+�����#��������#���������� "������������������#������ "�����.��"��#�����������#�" ����������#�����������������������+���������� "���

1���#����)2���" ������#"��������78 :$$9���������)2���#�" �5����)��"���

$� )"��#�� "�*��)2���#�" �5�����)��"��������#����������2���#�+�A� ���

�� ��#�#��������"�#������"�����#"���#������ "��#��� �������+��#��������� "��"�#����������������������#����� "�*��T�������#���"� �����*��"#����#�" �5�����

� �����*��"#����#�" �5���������� �#��#���+� ��"���+"� ��#�� ���#��#��������+��#���"#�������� "�*�1"��3

� �������6����

� -#���D��.�

:� ������#���������#��#��������#�#�����������#����������2���5�����+���#���)��������

�����#����"�����������������.�������"� ���#����"��#������D��.��+"� ��+�������"#���

E���3�-+����"#���������#����������� "���"�����#��"#��#����#���"� ������������������#������� "�����.������� "�*��T�

4� ����"� ���#���������#��#�������������������2������5����+���#���A"��������

���������������������������

-+�"#���#��#����������#����#�#��"�� ������������������������������������ �#��#����+���#���������������

$� �����*��"#����#�" �5������������#���"#���#��#��������#�#���� �#�+���#��������������

�� � "�*��� �#��

Working with DRP/MPS Output

4–47OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Processing Messages for a Planning Family

>������������������+����� ���"���+��" ��.���"����)2�2 ���"���1��" �)��"���

��������������������������������

1���#����)2���" ������#"��������78 :$$9���������)2�2 ���"���1��" �)��"���

$� �����*��"#��5����������������� �#��#���+� ��"���+"� ������� "�*1"���#�� ���#����� ���"���+��" �3

� 6����0�2 ��#

� 2 ���"���1��" �

�� ������#���"#���������������������#�#�����������������5�����+���#���)��������

�)2���#�" �5�����)��"���������+�������"#���#��#�����������2���#���������+�������"#���#�����������#��#�����������������"������ "��#"���

Manufacturing and Distribution Planning

4–48 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Processing Messages Automatically

1���#����)2���" ������#"��������78 :$$9���������)2���#�" �5����2���"���

(����� #���#"���#������"���������"�#���#"�� ����������������#�" 5�����2���"��������������������#���+� ��"���#�����+�������+���*����������������������#��+�����3

. ���������=���"#�

� �����

$ ��+�

/ �=���"#�

! -����������E���#"#����

9 �����������E���#"#����

- ���

����������������#�������������#��>���������"������������"��#����� �������*����#��"��#�����.�"##�����.�E������>��������"������������#��#�#����������"����#�����������*��"#����#�" �5�����

See Also

� !��"���#�����������"��#���(��!����*��������������

Placing Messages on Hold

>�������� ��������������� ����#��#�#����#���������#��������#����������"���#�����=#������#"���7+���=��� ���#��������������� ��"���9�������#����#�"���� ����������#" ���������� ��� ������� �#�#����

Working with DRP/MPS Output

4–49OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

�������������������

1����)2���" ������#"���78 :$$9���������)2���#�" �5�����)��"���

$� �����*��"#����#�" �5������� ��#����������������5�����)��""��+���#���)��������

�� ������F� �0)� ����+���#���)��������

�����#����"�� "��#��� ��������

Clearing Messages

>�������� �����������+�����#�" �5�����)��"���"+�������������#�#������"#��

��������������

1����)2���" ������#"���78 :$$9���������)2���#�" �5�����)��"���

$� �����*��"#����#�" �5���������������������#����������� ��5�����+���#���)��������

�� ����"���#������������"���+#��"#����.����� ������������( �5����+���#���A"��������

Adding a Freeze Code to a Purchase Order

>�������+��G��#���#"�������@���#"#���� ���"�����������������#��#�)2052��������#������#��������#"���������#���������#��������>��+��G�������������.�+�������#"�#"������+"�� ���������������"�����#��#����.����"������"#������� "��

���������(��������������������

1���#���2����������2���"��������78: ($$9����������#��2���������

$� �����*��"#������F���������� �#��#���+� ��"���+"� ������� "�*1"���#�� ���#��������������3

� ����D��.�

� 6����02 ��#

Manufacturing and Distribution Planning

4–50 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

�� ������#������������������#������������#�" �)��""���+���#���)�������

� ���������#�" �����������������#����������(��"#"��� �-�+��+���#��)���������

:� ���������#�" �C�2����--������ �#��#���+� ��"���+"� ������� "�*��T3

� 1��G������

Working with DRP/MPS Output

4–51OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����� /&��������

1��G������ (������#��#�"��"��#��"+�#�������"�+�G����52�05)2����

��#�� ���+��+�G�������

A� "���������3

> >���+��G��#�������

D D��������#�+��G��#�������7��+�� #9�

Adding a Freeze Code to a Work Order

>�������+��G��#���#"�������@���#"#���� ���"������*�������#��#��)2052�������#������#��������#"���������#���������#��������>���+��G����*���������#�������"��"#�"��#���+��G��#"���+������

���������(��������'�� �����

1���#�����" ������2����#"���C��"��#�������78 $$$9���������#�0�����������

$� �����*��"#��5���+��#�"�����*���������� �#��#���+� ��"���+"� ������ "�*�1"��3

� ����

� ����-#���D��.�

� 6����0�2 ��#

�� ������#�����*�����#��#��������#�#��+��G������� "�*��� ��#�

Manufacturing and Distribution Planning

4–52 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

� �����*�������#�" ��� "�*�#����#�#��,������#�.��������� �#��#��+� ��"���+"� �3

� 1��G������

4–53OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Understanding Forecast Consumption

1����#�������#"���"����"�#����"#��� ���"���+������ ��F��1����#������#"���"�.�������#�������#"���#��#���#�� �� ����������������������#���+����#���@���#"#"�������� ���.��"���"#������#"��#��7+����#9�(�#�� ��������� �����#��#��������#����#"��#���1����#�������#"����������������#������#���+�+����#���� ������"��#����� �� �#"���

1����#�������#"�����"���71�29���������+"�����������#����"��#��1����#�������#"���2�"���#�. ��71 :�49���"#�"�����1�2��#����#��������� ���������"�#�#�����������+����#�7@���#"#��#�����+�C1��;9�����+"#C"���+"#C��#�71-1�9�.�"�������#������#�����"#"��� �#"�����"���"+�#��+����#�������#���+�#���������#"�����"��������#���"��"����"#��#�����"��������#���+�#���#"����"��

�������"#"��� �+����#�������#"���#"�����"������"������#� �#��#������.��+�#"�����"���"���#"+"���"��#����"#".�#"���)�@�"����#�2 ���"����5�#�2����#"��������� �������5�#�"� �)�@�"����#�2 ���"��������#"�������������#�#� �+��� �#"�����"��������#��=�����4��

�����#����� ����� "��#���+����#�������#"����� �� �#"���"+������#�#�������"�#������"�����#"���

See Also

� '��������*������������ ������������

� �������������2� �*�����������2� �'�����

Manufacturing and Distribution Planning

4–54 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Past Due Time Buckets

>��������#�#������.���+���#�����#"���.��*�#�#��$������

Generationdate

PD1 PD2 1 2 3 4 5

Priorto current

FCP

FCP

Past Due Time Buckets

� ����+"#���#�����.��*�#�72��9�"�� ����� ���#"�"#��#��#�"������ ���#������.�+���#�������#������#"�����#��.�#��"#�"��#�������#�+����#������#"�����"���

� ������������#�����.��*�#�72�$9�"�� ����� ���#"�"#��#��#�"������ ���#������.�+���#���.��"��"����+�#�������#�+����#�������#"�����"���

-+���������#� ��#�������#�������"����#����#����� �� �#�����������@���#"#��+��#���+"#�#"���.��*�#���+� ��3

� 2�#�����+����#�7C1�����"��#��#��������#"�����#���.�#��+#��#��+����#�������#"���.��"��"�����#�9������������.�3

� 2�#������ ������7#��#��������#��"����9��.�#�����"#�"��#��+����#�������#"�����"���

� �� ������#��#������"������"#�"��#���+����#�������#"����"����.�#��"��#��#��������#"�����#��

� (������"�"���C1����"�������#��#���C1����"��#���+"#�.��*�#�#��#�"���#��#�����

Planning Horizon Time Periods

>����������"+��.�#��+����#�������#"���������"���������#���+�#���#"���"�����#���1����#�������#"���2�"���+����>������"+��#������.���+��" ������* �������1�2���"���"�� �����"��#���� ���"�����"G���"��#������"�����#"���+��#����)2052��������#"���������������#���������#� �������#����4��#�#� �#"����"������+����#�������#"�����"���.��*�#�

Understanding Forecast Consumption

4–55OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

-+��������"+�������.���+�� ���"�����"G������*�"��#�������"�����#"������#���#"����"������������#���"��"����"#����+����#�������#"�����"�������#����#������#�����#���#"����"��.��*�#�#���+ ��#�#���+����#������#"�����"���

-+�������+"���#���+����#�������#"�����"���.�����#������#���+����#������#"�����"�������������#���"��"����"#��#������#�C������#��"��#������+ ����� ������#����#����"� ���#���+����#�������#"�����#��7��#�#�����#�C������#�9�����#"����"��.��*�#�

>��������#�������"�����#"�����#��#�#����#����"�� "��#�� �#���+����#������#"�����"�������"�����"��-�@�"�����"��� �������"++���#"�#�.�#�����#���#"����"������#���+����#�������#"�����"���

Forecast Consumption Calculation

>�����+"���+����#�������#"�����"���#�������#�����"���"����"���� ��#��+����#������#"� ����+� ����������������C��������.��� ���������"��#"���� �������#��"�� ��������#��������#"����"��.��*�#�"��#����� �� �#"���+�#���+����#�������#"�������#�"������������"���#���� �������"����+�#"��7#���+����#�������#"�����"��9�+��#����#���#���������#������+����##��#������."�������� �������"����#��

�"#��+����#�������#"�������"����#����#������#���+� ��"���@���#"#�#���3

����7 1����#�@���#"#��+�������"+"��"#���+���#�����#�" �+����#�#�. �

��-7 (�#�� �� ������+���#���� ��������#�" �#�. �

��- �� ������#��#��=�����#���+����#��"� ����� �������C���"

���#��#����C1���

����� ��"����#�#��#�������"#�"��#���+����#�������#"�����"��

���� ;���������+����#

@"-)@�9- ��*���������� ���������3��� ��"����#�����#��#�����

#������#���+�+����#�����#�� ���������#���1�2

-��#���+� ��"����=��� �����*�����+��4������$4����"#�������������+����#�"���"#"������#�#���.��"��"����+�#���+����#�������#"�����"�������#����"�����@���#"#��7$:�9�������������+�#���+����#�7$�:��C�$:��?�$$��9���*���������������#��=���"#"�������"����"���#����="#"�����*����+���4��"����"��� �#��&4!�"����"���$�#��.� �������� ���"#���������"����"��$�

Manufacturing and Distribution Planning

4–56 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����� ��������"#"������+#��#���+����#�������#��������#���+����#��(����#����� ��7#�����*�����"����"���:9������#���� ������

������

1 4 5 0 ;

O6(; ::4 C&4! C&4! C&�! C:4!

O6( ::4

O��; 4� $4�

O�� &4!

'1��; $�:�

'1��� $$��

'�F-2 $:�

'��; $4�

?�(; C&4! C&4! C&�! C:4! C:4!

?�(

6�" �"���� ����������#��#���+����#��#�#���.��"��"����+�#���+����#������#"�����"����"�"�"G��#��������+���=���"#"�������

4–57OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Processing Orders

1���#�����" ������2����#"��������78 $$$9������������2���"��+

(+#���������52��)������#"�����52��D�#����������������2���"���#�������� #"� ����*���������������3�

� (##�����#�����#� "#�������#"���"�#��#"��

� ("������"�"#"� �����#�#�

� 8����#��#����������*�#��"�� ��"��3

� 2�#� "#

� )��#"���"�#��#"��

� ��������*�#������

� ��������#���#���

Before You Begin

� A�"+��#��#���*����������.������#��������� ���������.�������#��.��#���52��2 ���"���5�����������

See Also

� ����������!��"(������������'���������"��#���'���*��������� ��������

Processing Options for Work Order Generation

Process

1. Generate Parts List and ____________ Routing Instructions 1 = Parts list only 2 = Routing instructions only 3 = Both parts list and routing instructions Blank = Do not generate a parts list or routing instructions

Manufacturing and Distribution Planning

4–58 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

2. Update Parts List and Routing ____________ Instructions 1 = Update the existing parts list and routing instructions. Blank = Do not update the existing parts list or routing.

Defaults

1. Work Order Date ____________ 2. Header Status Code ____________

Parts List

1. Substitutions ____________ 1 = Substitution processing performed Blank = Substitution processing not performed. 2. Prior Revision Level ____________ 1 = Prior revision level used Blank = Prior revision level not used 3. Preflush Items ____________ 1 = Material issued for all items Blank = Material issued only for preflushed items 4. Commitment Processing Bypass ____________ 1 = Commitment processing not performed Blank = Commitment processing performed per commitment control 5. Batch Bill of Material ____________ Processing 1 = Bypass batch bill processing Blank = Perform batch bill processing 6. Parts List Text ____________ 1 = Copy the component’s generic text Blank = Do not copy the component’s generic text

Routing

1. Unit of Measure ____________ 2. Document Type ____________ 3. Line Type ____________ 4. Beginning Status ____________ 5. Subledger Field ____________ 1 = Work order number entered into the subledger field of the purchasing journal entries Blank = Work order number not used.

Processing Orders

4–59OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

6. Batch Routing Processing ____________ 1 = Bypass batch routing processing Blank = Perform batch routing processing 7. Routing Text ____________ 1 = Copy the operation’s generic text Blank = Do not copy the operation’s generic text

Sales/Config

1. Line Type ____________ 2. Next Status ____________ 3. Standard Cost Calculation ____________ 1 = Calculate standard cost 2 = Calculate standard cost only if it has not already been calculated Blank = Do not calculate standard cost

Printing 1

1. Work Orders ____________ 1 = Print work orders Blank = Do not print work orders or any associated information 2. Parts Lists ____________ 1 = Print parts list Blank = Do not perform any parts list print processing 3. Parts List Detail ____________ 1 = Print detail information Blank = Do not print detail information 4. Parts List on Separate Pages ____________ 1 = Print each parts list on a new page Blank = Print parts list on work order header page 5. Consolidated Parts List ____________ (FUTURE) 1 = Consolidate the parts list Blank = Do not consolidate the parts list 6. Parts List Component Text ____________ 1 = Print component (generic) text Blank = Do not print component text

Printing 2

1. Routing Instructions ____________ 1 = Print routing instructions Blank = Do not perform any routing instructions print processing 2. Routing Instructions on ____________ Separate Pages 1 = Print routing instructions on a new page Blank = Do not print routing instruction on new page

Manufacturing and Distribution Planning

4–60 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

3. Routing Instructions Text ____________ 1 = Print routing instructions (generic) text Blank = Do not print routing instructions text 4. Shop Packet Summary ____________ 1 = Print shop packet summary Blank = Do not print summary 5. Sales Order Text Lines ____________ 1 = Print sales order text lines Blank = Do not print sales order text

Warehouse Mgt

1. Pick Requests ____________ 1 = Generate request only 2 = Generate request and process using subsystem Blank = No request processed 2. Location Driver Processing ____________ Version (R46171) 3. Staging Location ____________ 4. Staging Location Availability ____________ 1 = Check staging location for availability Blank = Does not check for availability

Versions

1. Work Order Print (R31415) ____________ 2. Shortage Report (R31418) ____________ 3. Bar Coding Report (R31413) ____________ 4. Inventory Issues (P31113) ____________ 5. Purchase Order Entry (P4310) ____________ 6. Manufacturing Specifications ____________ (R37470)

Interop

1. Work Order Transaction Type ____________ 2. Parts List Transaction Type ____________ 3. Routing Instructions ____________ Transaction Type 4. Work Order Header Before Image ____________ 1 = Include before image Blank = Do not include before image 5. Parts List Before Image ____________ 1 = Include before image Blank = Do not include before image 6. Routing Instructions Before ____________ Image 1 = Include before image Blank = Do not include before image

4–61OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Working with Multilevel Master Schedules

5� #" ��� ���#������� ������#����. �C#�C���������#"��������� "����

>����#�������������#���� #" ��� ���#������� ��#�3

� ��+"����������"�+���#"��������+��" ��.�"�������*�����������������

� ��+"���� ���"���." �#����@�"��#�����#"�������+��#���#��#������=���##��� ����������� ���#�"� ������"�����#"���������" �. ������� �����������*��"�+��������""����"#�"��#������" �. ��#"���+���������#������� ���"���." �#����#"+��� �������������"� ��##��#"���"�������

� ;���#���������#�� ����"#�����������"����#���������������"�����"+"��#"���

� ��#��"G����������� �������#"���#��"�� ������ ��#���"�+���#"���#��#�����@�"��

� �=� ����� ���������������#����������#�"#���

��*"����"#���� #" ��� ���#������� �����"#��+�#���+� ��"���#�*3

� ��##"������+��#���� �����������#���

� 8����#"����� #" ��� ���#������� �

What Are Planning Bills?

2 ���"���." ����������+�"#����"����." ��+���#�"� �+���#��#��#��+ ��#�������"#���"�� ���2 ���"���." ��� �������������#�����@�""#"����+�����"�#���+��#"�������+��#���#��#��"��#�.��"�� �����"����� ��. ������"#���

2 ���"���." �� �������#�����+"������K�����L�����"#����1����������"#�����������#������#���"�������"@�����#����.������"�#�"����." ��+���#�"� +����������."��#"����+���#"�������+��#���#��#��"��#�.��"�� �����"��#�����������#�

>�����+"���� ���"���." �#����@�"��#�����#"�������+��#���"��#�������#"��#��#������=���#�#��� ��(�+"�� ����. ������� ������"��#��#�����#�"� � ��#"����������. ���+#����������#��������#���#"���

Manufacturing and Distribution Planning

4–62 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����+� ��"�������"��" �#�#����� ���"���." �+�������#���." ���"#��#�����"�����#"��3�

T1000 (Automobile)

(Options)

V–8 (75%) V–6 (25%)

ENG 100 (Engine Feature)

(���#����.������.���"�����#��#������"���+��#���+��� ���"�������������#������"�����#"��������#�.�����. ���#���#������#������"���+��#���������#�� ���="#�"��"����#����-#�"���������"#���

(�#��*"���#�����+�T�"���#"+"��#��#�#�������#�7��#���." �9�"�� ������+��"��#��������������*"#������+��#���"#���7���"��9������#��*"���#�����+��7����#��9��2���#����� �+�������"� �#�����+�����"���+����"���#�� ���#"���"�G�������#��������� "���"� �#C+�C �#�

����� �����������#�*������"�����#���." ���" ��"���"#����"������"�����=#���#���.�#�#����#"���+����"���#������������"����"�#�. �������� ���"���." �+���#�"� ��.����"���#"+"��#��������#�����+������#�����+����"���#��#�����=���#�#���"��

6���=� ��"���#�"�." ����"�#�#�����#������� ��+��#����$����+��" ���+��#���." ���#����#��������� �� �#��#���#�#� ��@�"����#�+�������#�����+���"���

Example: Exploding Planned Orders

-��#�"��=��� ���#����#����������#�������"���#������ ���������� ����+���#�������#�7�$������#���." �9��"��# ��#������#��#���� ���������� �����+�#������"���+��#���������#������#���+��#���� ���"�������#����#���=� ����#���� ����������� ����+��#������"���+��#�������#��#�������@�"����#�+��AC������AC&����"���

Working with Multilevel Master Schedules

4–63OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Weeks

Projected GrossRequirements

ScheduledReceipts

Projected AvailableBalance

Planned OrderRelease

2 3 4 5 6 7 81Weeks

Projected GrossRequirements

ScheduledReceipts

Projected AvailableBalance

Planned OrderRelease

2 3 4 5 6 7 81

Weeks

Projected GrossRequirements

Projected AvailableBalance

Planned OrderRelease

2 3 4 5 6 7 81

50 50 50

Weeks

Projected GrossRequirements

ScheduledReceipts

Projected AvailableBalance

Planned OrderRelease

2 3 4 5 6 7 81

50 50 50

50 50 50

12 12 1238 38 38

T1000 Auto

EngineFeature

V-8 V-6

Leadtime = 0

Feature Planning % = 75 % Feature Planning % = 25 %

ScheduledReceipts

5)2���@�"��#����@�"������"�����������#���������"#����. ��*�����������#��.�" ��#�������"����������������"����������+�����$������#���." ��"#�������"+"�����."��#"����+���#"����#�����"������"���"�����"##���#��#��� ��. ������"#����+#�������##����#�����#� "#�#��#�����*�����+��+"�� ���. ���

See Also

� ���������������'����������+���������"����+���#������� "��������#�����#��

Manufacturing and Distribution Planning

4–64 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Setting Up Feature Planned Percentages

>��������#������+��#���� �����������#����#����+"���#��������#�����+�������+�������"+"���+��#����.���������/��#���� ���

����������#������+��#���� �����������#��������������������#�������#���������"���#�������#��#"�� �����#�"#���"�.������ ���� ������#��������#�+������� ���"�����"�#"��������"��������"��#�.���� ���������

����������������������������

1���#�����" ��2�5��"��#�������78 �$$9����������#�0�������6" �

$� �����*��"#��6" ��+�5�#�"� ������ �#��#���+� ��"���+"� ������� "�*1"���#�� ���#��#���"#���+����"����������#�#��� ������3

� 6����

� -#���D��.�

�� ������������������ "�*��� ��#�

Working with Multilevel Master Schedules

4–65OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

� �����#��6" ��+�5�#�"� �-�+���#"�������� �#��#���+� ��"���+"� ������ "�*��T3�

� 1��#�2 ���Q

����� /&��������

1��#�2 ���Q ���������#�����+��������+�������"+"���+��#���.���

�����/��#��������#"����1���=��� ��������������"��#

�������&4Q��+�#��"� �."���#��"#���"����"��"#������

4Q��"#�� ����"��"#���.���������#�����������

����5�#�"� �2 ���"����#������#�"������#����#�

�����#� ��� ���+��������H���C�����#����

.�C�����#����#�������#��������� �����.���+�

�=��� �����#��4Q���4����������+�� #��� ���"��Q�

Generating Multilevel Master Schedules

1���#���2�"��"���"�� ���"#��2 ���"��������78 :��9��������52�)������#"���

������������#���52��)������#"����������#����#�������" ������#������ ���������#���52��D�#��������������������������#�#��"�� ������ �#����"#���#��#��������������"����#��� �#������#"����>����������#�����"����+�#���52��D�#�����������������"+"�� ��+���� #" ��� ���#������ "���

��������������#������ #" ��� ���#������� ���#����#����=� ����� ���������#��#���." ��+���#�"� ���������#������"���#"+"��#��������#�����+��

Manufacturing and Distribution Planning

4–66 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

��������#�"#����6���=� ��"���#���." ��+���#�"� ����"�#�#���#�#� ����.���+�=���#���� ���+�������#�"#�������������.#�"��#���#�#� ��@�"����#�+������"#����#������ ��� �"��#���." ��+���#�"� �

��������������#������#������� ���#����#������ ��#��� ��#��"�+���#"������+����� �� �#"�������������������#"��C������� ���"������� ��+��� �� ��#���"#���

Before You Begin

� ��#������ #" ��� ���#������� "���

See Also

� ����������'�����,$���������'���������+������"�+���#"����.��#�����#"�����#������� ������#����"���#�������"�����#"��

� �����#������2� �'������+��"�+���#"����.��#�����#����"���#"����"�������#"��������

MPS/DRP/MRP Parallel Processing

-��#������ � �����"�����#�����#����#���� �������#��������"#��"�� #����� ��.���"����� #"� �����������"���#����#�*��� �����������#����=���#����.�#������������������#��#��������#��������������������� � �����"�����#�������"����"��"+"���#���+���������"�����"����� "�"#����� ��.��#������.���+�������#��#�������" �. �������������

�����#������#��������#���.�#�����"���#�������� � �����"����-�#�"���"����#����#������������"�����#"���#��#�"��"��#��#������.���+���+"�����������#��#�#����#������#���=���#��#����.�#�����"���

E���3������"�� ������#������#������ �#��#������#�*�"���#����#��.�+������������=���#��#������ � �����"�����#����

See Also

� �������������������������������

Material Requirements Planning

Manufacturing and Distribution Planning

4–68 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

5–1OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Material Requirements Planning

5�#�"� �)�@�"����#�2 ���"���75)29����"�+���#"���+���#���." ��+���#�"� ����"����#��������#���� �� �#��#���#"��C��������#���#�"� ��@�"����#�+��������������#�"#��������.���. ���5)2�����#����� ��"����#�� ���#�����#�#��������#"����+�#���@���#"#"��#��#�������"+"���"��#���5�#�2����#"��������� ��752�9�

(�"�� �C+��" "#���@�"����#�� ����"#"�� ���++��#� ���C ��� ���������#���������������*" ��� �.�������������"�� �C+��" "#��"�� "��5)2��#�#����������#� ��� �

����5)2���������"#��+3

� ��#��"�"������#����������7+����#����#�������������"�#�� ��#������9

� ��.#��#"������#����������7"����#����������������������*����9

� �� �� �#"������#����������������������������"#

>����������������#�"� ��@�"����#�� ���"�������+�#������3

� 1��G��#���52�����������#��5)2

� A� "��#��#���52������#���������#�������."��#"����+�52������5)2

������������������#�"� ��@�"����#�� ����#����#�������"G������#�"� ��@�"����#�+����������. �����������#��������#����.��+������#�"� �������@�"����#�� �������#�#���52��+�������#"�����"���"��#��� ���"�����"G���

>������������#������#�"� ��@�"����#�� ���+��� �"#�����+������#������������#"������"���"�� ������ ��#���"#���#��#��������������"����#��� �#�����#"����(+#�����������#��5)2���#��#������������"�������������#�������

�����#������#���+� ��"���"���#�#��5)23�

� ������

� (���"�����#H�+����#������ �����

� ��������#H�� ����������+"����*�����������

Manufacturing and Distribution Planning

5–2 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

� ���� �

� 1"����*����

� )�#������� �

� 2���������

� -����#��

� -�C���"�#���#"��

� 2����#���#�

� -#���6�����71:$��9

� 6" ��+�5�#�"� �5�#��71 ���9

�����#��������#��#���+� ��"�����#��#�+���5)23�

� (�#"����������"��������

� �"����"���"#���� �� �#���@���#"#"��+�3

� ���"���(��" �. ��7�(9

� (��" �. ��#��2��"��7(�29

� ���� �#"���(��" �. ��#��2��"��7�(�29

� 2 ���������

5�#�"� ��@�"����#�� ���"������"#��+�#���+� ��"���#�*3

� 8����#"�����#�"� ��@�"����#�� ��

� ��*"����"#����#�"� ��@�"����#�� ��

� A� "��#"�����#�"� ��@�"����#�� ��

� 2���"�������+��5)2

How Do You Use Bills of Material in MRP?

����." ��+���#�"� ����"��������#�#��#���"�+���#"���#��#�5)2����#��=� ����#�����#�������#"�������� ��#��� ���������#�"#����-+�����#� "#������#��="#�+������*������5)2������#"������#���#������." ��+��#�"� �#���=� �����������

����+� ��"���+��#�����#��"�����"�����������#��=� ���������#�����"+�#���@���#"#�����������#����#����� �� �#������� ����#�3

� �++��#"�"#������*"��

� 1��#���� ���"��������#���

� E���#"#����

5–3OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

� 6" ��+���#�"� �����+��#�

� <���#"����++�#

� ����#"������

� 1"=�������"�. ��@���#"#��������. �

What Are the Differences between MRP and MPS?

52������� �����"���������#�����������" ��5)2������������#��������-���������#��������"��������+�����"#���#��#�"���� �#���#��#����������+��#���"#�����������������+��+"�"������������������#��������"�������#��#�"��"��# ��� �#���#������"����+���#���." ��+���#�"� �#��#���+���#��"#��������������#��5)2��"��#�� ��"�� ����+����#������ ������"+�"#������ ������"���7���9���#��������/�"#���+�����������������"�������+�������#��������������������5)2�"�� ���3

� 1"������� ��������*�����+��������#�"#��

� �� ����������+����#�+������"�����#

� -�#�� ��#�������

Manufacturing and Distribution Planning

5–4 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����+� ��"���" �#�#"����������#���5)2�����52��+ ����

Validated MasterProduction Schedule

Demand Supply

Service Part’s Validated Forecast Firm Work Orders

Messages

Time Series

Supply/Demand Inquiry

Validated Material Plan

Service Part’s Open Sales Orders Rate Schedules

Parent’s Planned Work OrderOpen Purchase Orders

Parent’s Firm Work Order Demand

In-Receipt Routing

Inventory

Purchase Orders Planned Work Orders

Product DataManagement

Capacity RequirementsPlanning

MaterialRequirements

Planning

Firm Work Orders

Shop Floor ManagementPurchasing

5–5OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

How Do You Run MRP Effectively?

5)2������#��++��#"�� ����������������#����������������� "�"#���+�#��+� ��"���"#��3

,������������� �����#��#�#�����#������� ��"��#� ��#�%4������#

�����#���(�������"��������.�������"���#������#"��

�+�������������#�#��#�����+��������+�#�������� ��

.������������� �����#��#�#���." ��+���#�"� �"��#� ��#�%�������#

�����#���������#�"��#�������#���������#����

@���#"#"���(�������"��������.�������"�������#��

"#���"�.�" #�"��#���+��#���#��#�������#���������#����

@���#"#"�����#�"����"��#���." ��+���#�"� ��-+�����+"����

�"��������.�#�����#�����#� "#�����#���." ��+���#�"� �

#���." ��+���#�"� �"���#������#��

��%������ �����#��#�����"����#�������#�"��#� ��#�%4������#

�����#���>����������"����#�"���������#������#������ �

����#������

9�������� �����#��#����� ���#"�������� "���D�#��#��#�#����#��

���"���� ������ ���#"����-�����#"����#�����#�� �#"���"#

#�*��#������ �#�����������������

Manufacturing and Distribution Planning

5–6 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

5–7OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Generating Material Requirements Plans

1���#����"�� ���"#��2�"��"��2 ���"�������#"��������78 :��9�������5)2)������#"��+

;��5)2�)������#"���#�����������"�� �C+��" "#��5)2�� ���"�������� ��+�#���"#���#��#������ ��#��( #���#"�� ��������������5)2�D�#��������#����������"�� �C+��" "#��5)2�� ���"�������� ���>������������#������#�"� �@�"����#�� ���+�3

� (�"�� ��"#��

� ( �"#��

� �� ��"#���#��#�����++��#���.��#����#"���"����#��� �#������#"��

��������������#������#�"� ��@�"����#�� ����#����#������ ��#��� ��#��"�+���#"������+����� �� �#"�������������������#"��C������� ��"����#�� ���+��� �� ��#���"#����5)2�������#"������#���������������)2052��������#"���

)��"���#���+� ��"���#��"��+��+�#���"�+���#"����.��#������#"���#���5)23

.������������� 5)2����#���." ��+���#�"� �#���=� �����������#���

��������#�"#����-+�����#� "#�������#��="#�+������*

�����5)2������#"������#���#������." ��+���#�"�

#���=� ������������

>������ ����+"�����." ��+���#�"� �#����5�7#�����

����+��#�"���." 9�+����*������������"#���#��

��#� "#�����+������#�� ���������������5)2

�����#"������." �#����5�#���@������"#��������"��

#������#��������#�"�.�" #�

9�'���%������ �����#������#��� ��C ��� ������#����#��"�������#

������������#�� �#"���"��������#����=� ���

����#��������#��#�����������#��5)2������#"��

�=� ���� ���� ��� ���������� ��+������+��#���

"#���������#���������#��=� �����������#�� ���

.� �������������"#���������"+�#��#�"#��������." ��+

��#�"� ��

Manufacturing and Distribution Planning

5–8 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

!������������ >�����#���������#"���#����:�����4�#�������#���

��#��� ���"�������� ��+��5)2�"#����-+�#���#�#���+

52��"�+�G���������#"���#����4��=� ������ ��#��

��������#�"#����+�#�����#������� ���"#������ ��#

�����#"���#����:�#���=� ����52��"#���������������#

"#����

���(�������� -+�����"���#"+����*������������������+�����"#��

��+�G����#���������������#��� �����������+��#��

"#����-�#������������"�����+�G�������������+��#��#

"#����

$������������ ���������5)2�������#"����.�������� ��#"�����

.����0� ��#����#���������������� ���"������������

�#����������������� ��#"���+���.���C���#�. �

+"� ���

����������#�������������#"�����#�#�����#��������+ ���#�

$�#��� ��#�"#���#��#��������������"����#��� �#

�����#"����+�#���������

>������������"��#���������� �#����#���+����� � �����"����-��#����� � �����"�����#�����#����#���� �������#��������"#��"�� #����� ��.���#" "G"����� #"� �����������"���#����#�*��� �����������#����=���#����.�#������������������#��#��������#��������������������� � �����"�����#�������"����"��"+"���#���+���������"�����"��

��� "�"#����� ��.��#������.���+�������#��#�������" �. �������������

�����#������#��������#���.�#�����"���+����� � �����"����-��#�"��"����#����#������������"�����#"���#��#�"��"��#��#������.���+���+"�����������������#������#����������#���=���#��#���.�#�����"���

Before You Begin

� A�"+��#��#�5)2����.�����#����

� ;���#����#���������#�����#������".���"�����������������'���������+

� 8����#����+����#�+��"���������#C�������"#����������������&�����*���������"��#���*���������������+

See Also

� �������������������������������

Generating Material Requirements Plans

5–9OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

� '�������������������'���� �+��"�+���#"����.��#�����#����+"���5)2��#��#��#�#����#��������"�������"��

� �����#������ ����3��������+��"�+���#"����.��#�����#�����#���D�#�������)��"���������#����"���"#���#��#����������������"#��#������� ����������� ��������#"�"#"�

� ����������'�����,$���������'���������+��#�������"�����#"���+�#�"������

Manufacturing and Distribution Planning

5–10 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

5–11OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Working with Material Requirements Plans

5)2���#��#����"#��+�"�+���#"���"��#���#"����"��������#"����������;�#���#"����"��"�+���#"���#�����"������#���#�������#�#���� ���"�������#��.��#����#�����#�����"���"#��>������ ����"���#�����#"���������+�"��"�"��� �"#������.��#����#��"�����"�����#"����"+������#��#����������#�#�*��

��*"����"#����#�"� ��@�"����#�� ������"#��+�#���+� ��"���#�*3

� )��"��"���5)2�#"����"�

� )��"��"���� ���"���+��" "��+��5)2

� ��*"����"#��������+��5)2

� ��*"����"#������� "���"�+���#"��

Reviewing MRP Time Series

1���#���5)2���" ������#"��������78 :$ 9��������5)2��"�����"�0(�2-�@�"��

;��#���5)2��"�����"��-�@�"��������#����"���#���"#����"��+��#����#�"� ��@�"����#�� ��������#"����"��"���������+�#"��C��������� ��������������##"���+��� ��#���"#���������#����#"����#�"���#��+���#����#�����#������#"�������#������������;������"�����#"���#���#�����" ������* ��������#� ��#"�����"���7.��*�#9�

5)2��"�����"��-�@�"��"�#����������������)2052���"�����"�0(�2-�@�"���>�����������#����##"���"��#�������"�����#"���#�����������#��#���"++���#��@�"����#�+��5)2�

Manufacturing and Distribution Planning

5–12 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

;��5)2���#�" �5�����)��"���#����"���#���@���#"#��#����#��#���������#��+��#�����#�"� ��@�"����#�� ���������@���#"#��#����"�� ���3

�������������@�9-� )�����#�������������� ��"����#�����+����

"#���

�������'�� �����

�G�"-�

)�����#��������+����������#�#��#��" �.�

������������#��+�#���� ��������*�����+��#��

����+��#����+�#�������#�"#���

"�� ������@"-� )�����#�������+��#�"�������#��#�"�����# ��"�

�������#��#����.������#��"G���#��.����*������

����'�� �����

�G�"-�

)�����#��������+����������#�#��#��" �.�

������������#��+�#���� �������*�����+��#��

����+��#����+�#�������#�"#���

Before You Begin

� 8����#��������#���#�"� ��@�"����#�� ���#��#�"�� ����#���#�#����������#��+��#���� ���"�����"���#��#��������#�#����"��������������������������.���� ���������+

See Also

� �����#������2� �'�����

Reviewing Planning Families for MRP

1���#���5)2���" ������#"��������78 :$ 9�������5)2�2 ���"���1��" �)��"���

(+#�����������#��#�����#�"� ��@�"����#�� ��������������"���� �"#�����.��#��#�������������>��������"� ���#��� "#��+�"#����"#��������.��"���#���+� ��"���+" #�3

� 6����02 ��#

� ������#�

� 2 ���"�������

� 5����������#��*"�������

� 2 �����D��.�

Working with Material Requirements Plans

5–13OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

� 6����D��.�

� 5�#��2 ���"���1��" �

5)2�2 ���"���1��" ��)��"���"�#����������������)2052��2 ���"���1��" �)��"����>�����������#����##"���"��#�������"�����#"���#�����������#��#���"++���#��@�"����#�+��5)2�

See Also

� �����������������������������*� ���

Working with Messages for MRP

1���#���5)2���" ������#"��������78 :$ 9��������5)2���#�" �5����)��"���

(����#����������"��# ���"���#�����#�" �5�����)��"������������� �#��#���+� ��"���#�*3

� )��"���5)2���#�" ������

� 2������*�����������+��5)2

� 2���������������������+��5)2

Manufacturing and Distribution Planning

5–14 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

�����#"������������#������#�"� ��@�"����#�� ����#����#��������#���#"���������#��"���#"+��"#��#"���"����"�����������@�"�������+�#��+� ��"��3

� �����"���#����="#"������ �����

� 2 ��"����������

;��5)2���#�" �5�����)��"���#����"����=���#"���������+���#��� �#�#� ���"��������#"����������������"��#��� ��������� ��#��� ����������="#"��������>���������"���#�����#��"#"�� �������+"#�������"����#��������"��#�������#��#����������#����

5)2���#�" �5�����)��"������#����������������)2���#�" �5����)��"����>�����������#����##"���"��#�������"�����#"���#�����������#��#���"++���#��@�"����#�+��5)2�

See Also

� !��"���#����������+��#�������"�����#"���+��#�"������

Reviewing MRP Detail Messages

��#�" �������"�� ����� ��+�#��������������#�" �5�����)��"����(+#����������#������#�"� ��@�"����#�� ����������"���#�����#"���������+�#���"��"�"��� �"#������.���(+#��������"�������������������������+�������+�#���+� ��"��3

� 2 ����#�������������� �

� � ���#��������

� �� �#��#��������

� 2����#��������

6�������#���������+��#�������#�"#����#����"��#���������#�� �����"�����"����������(#�#�����������#� ��� ��#����������"� ���������#��#���"�" ��#�����"���������7(9��( #������.�#��#�����+��������"�"��#�+���#�������#��#�����������"��"��#��#��#�#�������#��������"�+"�� ������

����+� ��"���#�. �����".������#����#�������������#�#�����@���#"#�#�����������*������������"���#���5)2������#"��������

E���3��#�#���������������+"����

Working with Material Requirements Plans

5–15OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

"�� -����-��������$*�3,��3,*�

$������� ��� ����������

-���������

$��������� ��������$�����

�2�7O2<�9 �#�#��?�27� �����9

2 ������������2�"����#��C�����#���������#�#�����"#���#���������"��#����*�����5�#��#�. ��71:��$9��)2052�05)2���#���#"�� ������������� ����#������@���#"#"�������#"���������#���������

'2��

���7O��������#� �����@�� O��;�"������ ���#���@���#"#"�9

�#�#��?�$�7+"�9

1"������������"���������"��#����*�����5�#��#�. ��71:��$9��)2052�05)2����#��������#��#�@�"��� �������#"���#��.� �������� �������������1����������#��������#����#��������#��#�#���� ������" #�*����#"���

'1��0'1��;��5����#����(������.��#����#���� �0������"�.� ������'1��������#�� �����@�� '1��;�"������� ���#����@���#"#"��

���7O��������#� �����@�� O��;�"������ ���#���@���#"#"�9

�#�#��?�:�7+"�9

1"������#��#��������#� "#������#"���"�#��#"����##�������)2052�05)2����#��������#��#�@�"��� �������#"���#��.� �������� �������������1����������#��������#����#��������#��#�#���� ������" #�*����#"���

'1��0'1��;��5����#����(������.��#����#���� �0������"�.� ������'1��������#�� �����@�� '1��;�"������� ���#����@���#"#"��

���7O��������#� �����@�� O��;�"������ ���#���@���#"#"�9

�#�#��?�:$7+"�� ��������9

1"�������"#��+"��� ���������������#��#������.����� ������.��������#"����+��)2052�05)2����"+�"��#�#��:$�"��#������"�����*������#�#�����"�����#"�����)2052�05)2����#�������#��#��@�"��� �������#"���#�.� �������� ��������������1���������#���������#����#�������#��#�#���� ������" ���#�#�*����#"������������������12��� ��������*�

'1��0'1��;��5����#�����������.��#��� �0������"�.� �����+��12�����#��'1���� ����@�� �'1��;�"������ ����#���@���#"#"��

���7O���@�� �O��;"������� ���#���@���#"#"�9

-�"��+��G�+�����7���#�#�����9

( �+"������"�"���+��G��+������)2052�05)2�������#��"� �����#"��������"�"���#���+��G��+������������������#��������#����(����"��#��"��"��#��#����"������ ������������"�.� �����"�"���#���+��G��+��������������������#�������#"����������#"���#���+��G��+�����#������#�#����� �0�������"�.� �����

'1��0'1��;�����������������#����#�������+���#������#��������

���7O���@�� �O��;"������� ���#���@���#"#"�9

1��G����������*���������7����#�#�����9

1�G���+"��������)2052�05)2������#����#����#"���������+��#������*������������������#�������#����(�����1����"����������������#��������+����������#���#"+���� �0�������"�.� �����

'1��0'1��;�����������������#����#�������+���#������#��������

See Also

� �����#���&������������

Manufacturing and Distribution Planning

5–16 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Processing Work Order Messages for MRP

��*����������������������#�" �5�����)��"����"#���������#�����+��������������������*������������#�����#������� ��.�����+"��#������#�����#���+�#��������������������+"�������" ���#�.���#���#"�� ��� ������"���.�@���#�52�������#"���

Processing Purchase Order Messages for MRP

2���������������������������#�" �5�����)��"����"#���������#����+��2�������������������������������������������3�

� 2������"�� ����#"����������"#���#�. ��*�#���������*"�������� "��#"���

� 2����������������#"����������"#��. ��*�#���������*"���

� 2�����������"������������������ "��#"���#��� ��������#�������"#�������������������

� 2����������������������"������ ���"���+��" ��

� 2�����������"���#������� "�������� "����#���

E���3�-+����"#���������#����������� "���"�����#��"#��#����#���"� ������������������#������� "�����.������� "�*��T�

See Also

� ����������!��"(�����������

� ������������������(�����������

� �����������������������������*� ���

Working with Scheduling Information

-����" ������#"���������"��#������#��"���#"+����#�" �"�+���#"����.��#�"#�����*����#������ ���"���+��" "���;��#���5)2�"�@�"��������#����#��"��#���#�#���+�"#�������*����#��

���� �#��#���+� ��"���#�*3

� )��"���5)2�����"���������

� )��"���5)2���� ������������

� )��"�������+ �����*.�����+��5)2

� )��"��� ���#"���+��5)2

Working with Material Requirements Plans

5–17OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Reviewing MRP Pegging Demand

;��2���"���-�@�"��#����#��"������K����L�#���������+��������+���������#��@�"����#��2���"���-�@�"���"� ����� ��#��������#�#��#���#�"��� ������������������2���"���-�@�"��� �������#�3

� �"� ���#�����*�����+������#"�� ��"#��

� �����#���������+��������+�������"#��

� �"� ���#����"++���#� ��� �"����." ��+���#�"� ���#��#�������������������+���#���.��"��"��� ��� �#������#�������#�"#��

>�������#����#�����#���+���������#��@�"����#����#����������#�"#���#�#���+"�� ����. ���"#������������#��#���� ��������+����#��>���������#�"�"�+���#"���#����#��"���"+����������#�������� ���������������

���%��',*�������������

1���#���5)2���" ������#"��������78 :$ 9��������2���"���-�@�"��

$� �����*��"#��2���"���-�@�"������� �#��#���+� ��"���+"� ��#�� ���#�#���"#���+����"����������#�#����"�������"���������3

� 6����02 ��#

� -#���D��.�

�� �����������������#�������"+"����#������� �#��#���+� ��"���+"� ������ "�*�1"��3

� )�@��#�����#�

Manufacturing and Distribution Planning

5–18 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����� /&��������

)�@��#�����#� ������#��#��#����"#���"�#���"�����#��#������#"���"�#��.�

���� �#��

Processing Options for Pegging Inquiry

Versions

Enter the version for each program. If left blank, version ZJDE0001 will be used.

1. Message File Revisions ____________ 2. Time Series ____________ 3. Supply and Demand Inquiry ____________ 4. Item Branch (P41026B) ____________

Reviewing MRP Supply and Demand

;������ �������������-�@�"��#����"���#�������#��������+����� ��#��"#�������� �������������-�@�"��� �������#�3

� �"� ���#�������#�"����#�����"#"����"�� ��"���� ������ ������ �����������

� )��"���"#���@���#"#����� ����������������������" �." "#��"����#�����

Working with Material Requirements Plans

5–19OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

���%��',*��������������

1���#���5)2���" ������#"��������78 :$ 9������������ �0������-�@�"��

$� �����*��"#������ ������������������ �#��#���+� ��"���+"� ��#� ���#��#���"#���+����"����������#�#����"������ ������������3

� 6����02 ��#

� -#���D��.�

�� �����������������#�������"+"��������#������� �#��#���+� ��"��+"� ������� "�*�1"��3

� ������#�

Processing Options for Supply/Demand Inquiry (P4021)

Display 1 Tab

;��#��������"�����#"���#�����"+�����#���#����#����"� ���#��+� ��"����� ���"��#������� �0�������-�@�"��������72:��$93

� (��" �." "#���"#���#��+�#��#��*

� )��#"���"�#��#"���@���#"#"�

� )��#"���"�#��#"���#���@���#"#"������"G��

Manufacturing and Distribution Planning

5–20 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

1. Deduct Safety Stock

;��#�"�����"�����#"���#�����"+�����#���#����#����"� ���#����+�#�#��*� "��������������#����+�#��#��*�+���#������" �. ��@���#"#���A� "��� �����3

6 ��* �����#���������#������#��+�#��#��*�$ �����#��������#��+�#��#��*�

2. Routing Quantities

Quantity in Transit

;��#�"�����"�����#"���#�����"+�����#���#����#������"���#���E���#"#�"�����"#���#��+�#�����C�����@���#"#���-��������+��#�"������"�����#����#"���"#�"��������#���#�. "�������#��*�"��"������#����#��"�����#���"#�"����" �. ��+��"����"�#������A� "���� �����3

6 ��* �����#����"� ���#���E���#"#��"�����"#�+��#��������"�#����#��$ �����#���"�� ����#���E���#"#��"�����"#�"��#�����C�����"����#���

Quantity in Inspection

;��#�"�����"�����#"���#�����"+�����#���#����#������"���#���E���#"#�"��-����#"�����#��+�#�����C�����@���#"#���-��������+��#�"������"�����#����#"���"#�"��������#���#�. "�������#��*�"��"������#����#��"�����#���"#�"����" �. ��+��"����"�#������A� "���� �����3

6 ��* �����#����"� ���#���E���#"#��"��-����#"���+��#��������"�#����#��$ �����#���"�� ����#���E���#"#��"��-����#"���"��#�����C�����"����#���

User Defined Quantity 1

;��#�"�����"�����#"���#�����"+�����#���#����#������"���#���;���+"����E���#"#��$���#��+�#�����C�����@���#"#�����"�@���#"#��"���+"����"��#��;���#������#"���$�+"� �����#���)���"�#�)��#"�����+"�"#"���+����-�������+��#�"������"�����#�����#"���"#�"��������#���#�. "�������#��*"��"������#����#��"������#���"#�"����" �. ��+��"����"�#������A� "���� ����3

6 ��* �����#����"� ���#���;����+"����E���#"#��$�+��#��������"�#����#��$ �����#���"�� ����#���;����+"����E���#"#��$�"��#�����C����

"����#���

User Defined Quantity 2

;��#�"�����"�����#"���#�����"+�����#���#����#������"���#���;���+"����E���#"#������#��+�#�����C�����@���#"#�����"�@���#"#��"���+"����"��#��

Working with Material Requirements Plans

5–21OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

;���#������#"�����+"� �����#���)���"�#�)��#"�����+"�"#"���+����-�������+��#�"������"�����#�����#"���"#�"��������#���#�. "�������#��*"��"������#����#��"������#���"#�"����" �. ��+��"����"�#������A� "���� ����3

6 ��* �����#����"� ���#���;����+"����E���#"#����+��#��������"�#����#��$ �����#���"�� ����#���;����+"����E���#"#����"��#�����C����

"����#���

3. Receipt Routing Summary

;��#�"�����"�����#"���#�����"+�����#���#����#�������"G��� @���#"#"��+��#���-��)���"�#���#"���#���"�#������ "����A� "���� �����3

6 ��* �����#���������#�����"G��$ �����#�������"G��#���-��)���"�#���#"���#���

Display 2 Tab

;��#��������"�����#"���#�����"+�����#���#����#����"� ���#��+� ��"��3

� �����"G���"#��� ���#"�������

� ���� �0�������-�@�"��������72:��$9�"��#����"�����+���#

� 2 ���������

� 6� *�#��*"���#��������

1. Item Location Summary

;��#�"�����"�����#"���#�����"+�����#���#����#�������"G��� �#��@���#"#"��"��#���"#��� ���#"��������"�#������ "����A� "���� �����3

6 ��* �����#���������#�����"G��$ �����#�������"G��� �#���@���#"#"��"��#���"#��� ���#"��������

2. Window Mode Display

;��#�"�����"�����#"���#�����"+�����#���#����#����"� ���#������� ��,�������-�@�"��������72:��$9�"��#����"�����+���#�"+��� ���+������#���������A� "���� �����3

6 ��* �����#����"� ���#���������"��#���+� �+���+���#�$ �����#����"� ���#���������"��#����"�����+���#�

Manufacturing and Distribution Planning

5–22 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

3. Include Planned Orders

;��#�"�����"�����#"���#�����"+�����#���#����#����"� ���� ���������+���52�05)20�)2������#"����A� "���� �����3

6 ��* �����#���������#��"� ���� ����������$ �����#����"� ���� ����������

4. Exclude Bulk Items

;��#�"�����"�����#"���#�����"+�����#���#����#����"� ���.� *�#��*"��#����������A� "���� �����3

6 ��* �����#����"� ���.� *�#��*"���#���������$ �����#���������#��"� ���.� *�#��*"���#���������

Display 3 Tab

;��#��������"�����#"���#�����"+������#����#���������#���+� ��"��@���#"#"�3

� ��*�����@���#"#�

� (��" �. ��@���#"#�

1. Convert Quantity

;��#�"�����"�����#"���#�����"+�����#���#����#��������#�@���#"#"��#�#���#��������#������A� "���� �����3

6 ��* �����#���������#������#�#���@���#"#"��$ �����#��������#�#���@���#"#"��

2. Reduce Expired Lot Quantities

;��#�"�����"�����#"���#�����"+�����#���#����#��������#�#����=�"�� �#�@���#"#"��+���#������" �. ��@���#"#���A� "���� �����3

6 ��* �����#���������#�������#������" �. ��@���#"#��$ �����#���������#������" �. ��@���#"#��

��"�����"�����#"���������#���*��"#�����" �. ��#�����"�� "����-+������������ ���$�"��#�"�����"�����#"����������#��#�#���(��" �. ��#��2��"�<"���1 �������"�����#"���������#���2����$���.��#���"#���. ��*�����

Working with Material Requirements Plans

5–23OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Process 1 Tab

;��#��������"�����#"���#�����"+�����#���#����#����"� ���#�����" �. ��#�����"�� "�����#������� �#"������" �. ��#�����"�� "��������#����+�� #�"�� �"�����"���������+�� #��#�C.��������� ��#����

1. Available to Promise Line Flag

;��#�"�����"�����#"���#�����"+�����#���#����#����"� ���������" �. �#�����"�� "���������� �#"������" �. ��#�����"�� "��������"#����A� "���� ����3

6 ��* �����#���������#��"� ����"#��� "���$ �����#����"� ���#������" �. ��#�����"�� "���� �����#����"� ���#������� �#"������" �. ��#�����"�� "���

-+�����������#���"� ���#������" �. ��#�����"�� "���7�� ���$9�"��#�"����"�����#"�������������#����#����"� ��� ���.��)�������=�"���<�#E���#"#"������"�����#"���7�.���9�

2. Supply and Demand Inclusion Rules Version

;��#�"�����"�����#"���#�����"+��#������ �������������"�� �"���� ���"���+��#����#���#������������ ����+"���#�������#����� "���#������� "���#�#���-�� �"���� ����"���"��������+"���������7:�0)A9�#��#�"���#"+"�#�����"���#�����+������"������#�����"�� �"���� ��#�������#�����+�� #�� �����������"#�+���#����� ��#�;����+"��������+���

3. Rate-Based Schedule Type

;��#�"�����"�����#"���#�����"+��#����#�C.��������� ��#����+��#���#���#���"� ����)�#�C.��������� ��#����"��������+"���������7 $0��9�#��#"���#"+"��#�������� ��#�������#��#���#����#�������#�����+�� #��� ����������"#�+���#����� ��#�;����+"��������+����-+����� �����#�"�+"� ��. ��*��#���#���������#��"� ��������#�C.��������� ��

Process 2 Tab

;��#��������"�����#"���#�����"+����"���+����#�#����#��"�� ����"��#��"�@�"������#������.���+�����+���#����#�����#��#��"�� ����"��#���+����#�����

1. Forecast Types

;��#�"�����"�����#"���#�����"+����"���+����#�#��������#��+"����#��#�#���#���"�� ����"��#���"�@�"���-+����� �����#�"�+"� ��. ��*��#����#���������#"�� ��������+����#���������#���� #"� ��+����#���+� ��3������#���$���������61��#�����$��61�

Manufacturing and Distribution Planning

5–24 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

2. Number of Days

;��#�"�����"�����#"���#�����"+��#������.���+�����7O���'9�+���#���#�����#��#��#��������#�#����#���#��"�� ����+����#�������-+����� ����#�"�+"� ��. ��*��#����#������#����#�����#��

Versions 1 Tab

;��#��������"�����#"���#�����"+��#�����"����+�#���+� ��"��������#��#�#����#�������"#��#������� �0�������-�@�"��������72:��$93

� 2������������#��72: $$9

� 2����������-�@�"��72: $�9

� �� ��������#��72:�$$9

� �� ������-�@�"��72:��:49

� ������ "�����*.�����72 $��49

� 5)2052�0�)2�2���"���-�@�"��72 :$�9

A�"������#� �����#����������"� ���"�+���#"��������+���������"��#�����#���#�#�������"�����#"���#�����"+"����"���#�����#����������

1. Purchase Order Entry (P4311)

;��#�"�����"�����#"���#�����"+��#�����"����+�#���2������������#�������72: $$9�#��#�#����#������������� �+����������+����="#�+��#�����*��"#������ �������������+����-+����� �����#�"�+"� ��. ��*��#���#������#���U������$���"����+�#���2������������#��������

A�"������#� �����#���2������������#���������"� ���"�+���#"�������+���������"��#������#���#�#�������"�����#"���#�����"+"����"���#����#����������

2. Purchase Order Inquiry (P4310)

;��#�"�����"�����#"���#�����"+��#�����"����+�#���2����������-�@�"�������72: � �$9�#��#�#����#������������� �+����������+����="#+���#�����*��"#������ �������������+����-+����� �����#�"�+"� ��. ��*��#���#������#���U������$���"����+�#���2����������-�@�"��������

A�"������#� �����#���2����������-�@�"���������"� ���"�+���#"�������+���������"��#������#���#�#�������"�����#"���#�����"+"����"���#����#����������

Working with Material Requirements Plans

5–25OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

3. Sales Order Entry (P4211)

;��#�"�����"�����#"���#�����"+��#�����"����+�#����� ��������#�������72:�$$9�#��#�#����#������������� �+����������+����="#�+��#�����*��"#������ �������������+����-+����� �����#�"�+"� ��. ��*��#���#������#���U������$���"����+�#����� ��������#��������

A�"������#� �����#����� ��������#���������"� ���"�+���#"�������+���������"��#������#���#�#�������"�����#"���#�����"+"����"���#����#����������

4. Sales Order Inquiry (P42045)

;��#�"�����"�����#"���#�����"+��#�����"����+�#����� ������-�@�"�������72:��:49�#��#�#����#������������� �+����������+����="#�+��#�����*��"#������ �������������+����-+����� �����#�"�+"� ��. ��*��#���#������#���U������$���"����+�#����� ������-�@�"��������

A�"������#� �����#����� ������-�@�"���������"� ���"�+���#"�������+���������"��#������#���#�#�������"�����#"���#�����"+"����"���#����#����������

5. Scheduling Workbench (P31225)

;��#�"�����"�����#"���#�����"+��#�����"����+�#��������� "�����*.����������72 $��49�#��#�#����#������������� �+����������+����="#�+��#�����*��"#������ �������������+����-+����� �����#�"�+"� ��. ��*��#���#������#���U������$���"����+�#��������� "�����*.�����������

A�"������#� �����#��������� "�����*.������������"� ���"�+���#"�������+���������"��#������#���#�#�������"�����#"���#�����"+"����"���#����#����������

6. Pegging Inquiry (P3412)

;��#�"�����"�����#"���#�����"+��#�����"����+�#���52�05)20�)2�2���"��-�@�"��������72 :$�9�#��#�#����#������������� �+����������+���="#�+���#�����*��"#������ �������������+����-+����� �����#�"�+"� �. ��*��#����#������#���U������$���"����+�#���2���"���-�@�"��������

A�"������#� �����#���2���"���-�@�"���������"� ���"�+���#"�������+���������"��#������#���#�#�������"�����#"���#�����"+"����"���#����#����������

Manufacturing and Distribution Planning

5–26 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Versions 2 Tab

;��#��������"�����#"���#�����"+��#�����"����+�#���+� ��"��������#��#�#����#�������"#��#������� �0�������-�@�"��������72:��$93

� 5)2052�0�)2��"�����"��72 :$ 9

� 5)2052�0�)2�5�������#�" �72 :$$9

� 6" ��+�5�#�"� �-�@�"��72 ����9

� -#���6�����72:$��&69

� 5���+��#�"�����*�����2���"���72:��$ 9

� ��#�0�������)�#�������� ��72 $�%9

� -#���(��" �." "#��72:$���9

A�"������#� �����#����������"� ���"�+���#"��������+���������"��#�����#���#�#�������"�����#"���#�����"+"����"���#�����#����������

7. MPS Time Series (P3413)

;��#�"�����"�����#"���#�����"+��#�����"����+�#���52���"�����"�������72 :$ 9�#��#�#����#������������� �+����������+����="#�+��#�����*��"#������ �������������+����-+����� �����#�"�+"� ��. ��*��#���#������#���U������$���"����+�#���52���"�����"��������

A�"������#� �����#���52���"�����"���������"� ���"�+���#"�������+���������"��#������#���#�#�������"�����#"���#�����"+"����"���#����#����������

8. MRP/MPS Detail Message Revisions (P3411)

;��#�"�����"�����#"���#�����"+��#�����"����+�#���52�05)2���#�" 5�����)��""���������72 :$$9�#��#�#����#������������� �+���������+����="#�+���#�����*��"#������ �������������+����-+����� �����#�"+"� ��. ��*��#����#������#���U������$���"����+�#���52�05)2���#�" 5�����)��""���������

A�"������#� �����#���52�05)2���#�" �5�����)��""����������"� ��"�+���#"��������+���������"��#������#���#�#�������"�����#"���#�����"+"���"���#�����#����������

9. Bill of Material Inquiry (P30200)

;��#�"�����"�����#"���#�����"+��#�����"����+�#���6" ��+�5�#�"� �-�@�"�������72 ����9�������#��#�#����#������������� ���+���������+����="#�+���#�����*��"#������ �������������+����-+����� �����#�"�+"� �. ��*��#����#������#���U������$���"����+�#���6" ��+�5�#�"� �-�@�"�������

Working with Material Requirements Plans

5–27OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

A�"������#� �����#���6" ��+�5�#�"� �-�@�"���������"� ���"�+���#"�������+���������"��#������#���#�#�������"�����#"���#�����"+"����"���#����#����������

10. Item Branch (P41026B)

;��#�"�����"�����#"���#�����"+��#�����"����+�#���-#���6����������72:$��&9�#��#�#����#������������� ���+����������+����="#�+���#����*��"#������ �������������+����-+����� �����#�"�+"� ��. ��*��#����#�����#���U������$���"����+�#���-#���6�����������

A�"������#� �����#���-#���6������������"� ���"�+���#"��������+��������"��#������#���#�#�������"�����#"���#�����"+"����"���#�����#���������

11. Manufacturing Work Order Processing (P48013)

;��#�"�����"�����#"���#�����"+��#�����"����+�#���5���+��#�"�����*����2���"���������72:��$ 9�������#��#�#����#������������� ��+����������+����="#�+���#�����*��"#������ �������������+����-+���� �����#�"�+"� ��. ��*��#����#������#���U������$���"����+�#��5���+��#�"�����*�����2���"���������

A�"������#� �����#���5���+��#�"�����*�����2���"���������"� ���"�+���#"��������+���������"��#������#���#�#�������"�����#"���#����"+"����"���#�����#����������

12. Enter/Change Rate Schedule (P3109)

;��#�"�����"�����#"���#�����"+��#�����"����+�#�����#�0�������)�#������� ��������72 $�%9�������#��#�#����#������������� ���+���������+����="#�+���#�����*��"#������ �������������+����-+����� �����#�"+"� ��. ��*��#����#������#���U������$���"����+�#�����#�0�������)�#������� ��������

A�"������#� �����#�����#�0�������)�#�������� ���������"� ��"�+���#"��������+���������"��#������#���#�#�������"�����#"���#�����"+"���"���#�����#����������

13. Item Availability (P41202)

;��#�"�����"�����#"���#�����"+��#�����"����+�#���-#���(��" �." "#�������72:$���9�#��#�#����#������������� ���+����������+����="#+���#�����*��"#������ �������������+����-+����� �����#�"�+"� ��. ��*��#���#������#���U������$���"����+�#���-#���(��" �." "#��������

A�"������#� �����#���-#���(��" �." "#���������"� ���"�+���#"�������+���������"��#������#���#�#�������"�����#"���#�����"+"����"���#����#����������

Manufacturing and Distribution Planning

5–28 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Reviewing Shop Floor Workbench for MRP

(+#������*�����"����#�������+ ����������#���"���#���������������*�����"#���#�#���� �����������#"��� "����>����"��#������#���������������� �#��*����#���5�#�"� �)�@�"����#�2 ���"�������� ���� "��

���%��'��������'�� ��������,*�

1���#���5)2���" ������#"��������78 :$ 9�������������1 �����*.�����

$� �����*��"#������������ "�������� �#��#���+� ��"���+"� ��#�� ���#�#���.����0� ��#�+����"����������#�#���"� ���#�������+ ����*.����3

� 6����02 ��#

�� �����������������#�������"+"����*���������� �#��#���+� ��"��+"� ������� "�*�1"��3

� -#���D��.�

� 2 ����

� ��#���

� 2���#���

� 1����#�#�

� ���

� ������R')�+

Working with Material Requirements Plans

5–29OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

� )��"���#���+� ��"���+"� �3

� E���#"#������

����� /&��������

2 ���� ���������.��*����.���+������������� �����

D�#�3�(�����"�����#"���+������+���� �������#�

��#������+�� #��� ���+��#�"�+"� ��.��������� ���+�

��#����������$�72���9��������� ��>����#����#�����+�� #

�� ������#�����+�� #�5���������������"��+���

(+#�������#����#�����+�� #��� �������#�������"��

��#"����#�����+�� #�"�+���#"����"� �����#���#"�� ����

������*�����#��#��������#��"+�#�����#���������

�"#�"���"���#��>��������"#��������#������"���#��

��+�� #��� ���

��#��� (����.��#��#�"���#"+"�������#��"��#���(����6��*

�#����;��#�"����.��#��"���#"+����� �����

��� "���#����#"�"���#����#�������� "���#����#���

���#"�������������#��������.��*����.��

2���#��� (����.��#��#�"���#"+"��#�������#���*������>������

���#�"����.��#�����#���+� ��"��3

� ��#����+�� #��� ���+��������*�����������������2"�"#����#�#�������5�����

� 8������*�����+����/��#��#���������#"��

1����#�#� ;����+"����������#�������#��������#��#����".��#��

#�#���+�����*������(���#�#���������+���%��#���%%

��#���#"�� ������#��#�����#������ �#���

������R')�+ (��� �������"���� �������������C�+�������

���������+���������.������"�� ���#�"�"�#��

��#�������.������ "�����.�����/�.����.��

E���#"#������ �����"�"�� �@���#"#��+��#���������#�" � "����� ���

�"��������������#��#��#�@���#"#����"���� �@���#"#"�

�"���������"������������������#����#��

Manufacturing and Distribution Planning

5–30 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Processing Options for Manufacturing Scheduling Workbench

Status/Item

1. Select Status Range or Item

From WO Status ____________ Thru WO Status ____________ Item Number ____________ Item Cross Reference ____________

Addresses

1. Select Planner and/or Customer

Address Number-Planner ____________ Address Number-Customer ____________

Categories

1. Select WO Categories

WO Type ____________ WO Priority ____________ Phase (Category 1) ____________ Category 2 ____________ Category 3 ____________

Document

1. Select WO Document Type

WO Document Type ____________

Versions

1. Note: Versions will default to ZJDE0001

Sales Order Inquiry Version ____________ Purchase Order Inquiry Version ____________ Work Order Completions Version ____________ Super Backflush Version ____________ Inventory Issues Version ____________ Work Order Entry Version ____________ Sales Order Entry Version ____________ Purchase Order Entry Version ____________ Work Order Parts List Version ____________ Work Order Routing Version ____________

Working with Material Requirements Plans

5–31OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Reviewing Leadtime for MRP

;��<���#"���-�@�"��#����"��� ���#"���+������������#���"����"��#�

���%��'�����������,*�

1���#���5)2���" ������#"��������78 :$ 9��������<���#"���-�@�"��

$� ���<���#"���-�@�"��C�5� #"�<��� �-����#�������� �#��#���+� ��"���+"� ������ "�*�1"���#�� ���#��#���"#���+����"����������#�#���"� ��� ���#"��3

� 6����

� -#���D��.�

�� )��"���#���"�+���#"���"��#���+� ��"���+"� �3

� <���

� 5���+��#�"��

� ���� �#"��

Processing Options for Bill of Material Inquiry

Defaults Tab

���������"�����#"������"+��#�����+�� #���#"���#��#�#����#������ "���"���#�������"�������"�@�"��������." ��+���#�"� �#����������"� ���@������

Manufacturing and Distribution Planning

5–32 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

1. Processing Mode

;��#�"�����"�����#"���#�����"+������#����#����"� ���#���"�+���#"�������"�������"�@�"���������+���#���+� ��"�������"�������3�"�� �"�@�"�����#����" �." "#����� ���#"���"�@�"��

����"�� ��"�@�"��������"� ���#�����������#��+���." ��+���#�"� �

������#����" �." "#��������"� ���#�����������#��+���." ��+���#�"� �����#�����" �. ��@���#"#"��+��#������������#��-+��������#�"����������"+����#����������#�#����#���#���.#��#��+�#��#��*�+���#���@���#"#����������������#���#���"� �������#"���@���#"#"���"���#�����+�#���#��*�����D���#"��-#�������"�����#"��������#����� ��#�#�.�

���� ���#"���"�@�"��������"� �����#�� ������� �� �#��� ���#"���+�����"#���(�#�� � ���#"��������"����+���#��� ���#"���������#���"��#���-#���6����#�. ��.��#���<���#"���)� ������������ �� �#��� ���#"������#������.���+����#��#�������#�#�#�#������+��#�������#��"��#��#�����#��#��#�#�������#�����"#��>����������#�"�������+�����"���#����+"��� ���#"���+�����"#����#�������#"���"�#��#"���#�����#���������#�����#�� ������� �� �#��� ���#"���-+��������#�"����������"+�����#����������#�#����#���#���"� ���#�����#�� ���� �� �#��� ���#"���"��#���<���#"���A� �������"�����#"��������#���� ��#�#�.�

A� "���� �����3

$ �����#����"� ���#���"�� ��"�@�"�������� �����#����"� ���#�����#����" �." "#������� �����#����"� ���#��� ���#"���"�@�"�������

-+����� �����#�"�����"�����#"���. ��*��#����#����"� ���#���"�� ��"�@�"������

2. Inquiry Mode

;��#�"�����"�����#"���#�����"+��#��� ��� ��+���#�" �#��#��������#�#���#���#���"� ��������"�� �� ��� �������"� ���#�������#�"#�������"#��������#�������� #" ��� �������"� ���#�������#�"#����"#���������#�����#����.���. "���+�#�����������#�������� #" ��� �"����#���������"� ��#�������#�"#����"#���������#������#����.���. "���+�#�����������#��-����"#"����"#�"����#�#����.���. "���A� "���� �����3

$ �����#����"� ���#���"�� �� ��� ������� �����#����"� ���#����� #" ��� ������ �����#����"� ���#����� #" ��� �"����#��������

-+����� �����#�"�����"�����#"���. ��*��#����#����"� ���#����� #" ��� "����#��������

Working with Material Requirements Plans

5–33OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

3. Bill of Material Type

;��#�"�����"�����#"���#�����"+��#���#�����+�." ��+���#�"� �#��#�#����#�������#�����+�� #��� ���"��#���������+�6" �+"� �����#�����*��"#��6" ��+5�#�"� �+����6" ��+���#�"� �#����"��������+"���������7:�0�69�#��#��"���#��#���#�����+�." ��+���#�"� ����#��#���." ��+���#�"� �#����#������������"#�+���#����� ��#�;����+"��������+����-+����� �����#�"�����"����#"���. ��*��#����#������5�+������+��#�"���." ��+���#�"� �

4. Display Sequence

;��#�"�����"�����#"���#�����"+�������������#�#����#���#���#"�+���#"������#�����*��"#��6" ��+�5�#�"� �+����>�������������#��@������#�����#��.����������#� "������.����.������#"����@��������.���������������#� "������.��"��"��#��#����@�������+�#�����������#�����." ��+���#�"� ����������#"����@���������.��"��"��#��#����@�������+#���+�."��#"��������. ��#���"��#�������+��#����+����"#����A� "���� ����3

$ �����#����#�.����������#� "������.��� �����#����#�.������#"����@���������.��

-+����� �����#�"�����"�����#"���. ��*��#����#����#�#�����#��.���������#� "������.��

Versions Tab

���������"�����#"������"+����"�����"���#����#������+��#��+� ��"��������3�6" ��+�5�#�"� �2"�#��������*.����������F������6" ��+5�#�"� �)��""����-#���5�#���2����-�@�"�����*��"#��)��#"���5�#��-#���(��" �." "#���-#������)�+�����������-#���������

1. Bill of Material Print (R30460)

;��#�"�����"�����#"���#�����"+��#�����"����+�#���6" ��+�5�#�"� �2"�#���#�#��#�#����#�������-+����� �����#�"�����"�����#"���. ��*��#���#������#���U������$���"���

A�"������#� �����#���6" ��+�5�#�"� �2"�#����#��"� ���"�+���#"�������+���������"��#������#���#�#�������"�����#"���#�������"+"����"���#����#����������

2. ECO Workbench (R30460)

;��#�"�����"�����#"���#�����"+��#�����"���#��#�#����#��������������������#���)����="#�#��#���������*.�����������+���#�����*��"#��6" �+�5�#�"� �+����-+����� �����#�"�����"�����#"���. ��*��#����#������#��U������$���"���

Manufacturing and Distribution Planning

5–34 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

A�"������#� �����#���������*.������������"� ���"�+���#"�������+���������"��#������#���#�#�������"�����#"���#�������"+"����"���#����#����������

3. ECO Header (P48020)

;��#�"�����"�����#"���#�����"+��#�����"����+�#�������F����������#��#�#����#���������������������#���1����="#�#��#���6" ��+�5�#�"� )��""���������+���#�����*��"#��6" ��+�5�#�"� ��-+����� �����#�"����"�����#"���. ��*��#����#������#���U������$���"���

A�"������#� �����#�������F������������"� ���"�+���#"��������+��������"��#������#���#�#�������"�����#"���#�������"+"����"���#�����#���������

4. Bill of Material Revisions (P3002)

;��#�"�����"�����#"���#�����"+��#�����"���#��#�#����#��������������������#���1����="#�#��#���6" ��+�5�#�"� �)��""���������+���#�����*�"#��6" ��+�5�#�"� �+����-+����� �����#�"�����"�����#"���. ��*��#����#�����#���U������$���"���

A�"������#� �����#���6" ��+�5�#�"� �)��""����������"� ��"�+���#"��������+���������"��#������#���#�#�������"�����#"���#������"+"����"���#�����#����������

5. Item Master (P4101B)

;��#�"�����"�����#"���#�����"+��#�����"���#��#�#����#��������������������#���1����="#�#��#���-#���5�#��������+���#�����*��"#��6" ��+��#�"� �+����-+����� �����#�"�����"�����#"���. ��*��#����#������#��U������$���"���

A�"������#� �����#���-#���5�#���������"� ���"�+���#"��������+��������"��#������#���#�#�������"�����#"���#�������"+"����"���#�����#���������

6. Process Inquiry (P30240)

;��#�"�����"�����#"���#�����"+��#�����"���#��#�#����#��������������������#���1����="#�#��#���2����-�@�"��������+���#�����*��"#��6" ��+5�#�"� �+����-+����� �����#�"�����"�����#"���. ��*��#����#������#��U������$���"���

A�"������#� �����#���2����-�@�"���������"� ���"�+���#"�������+���������"��#������#���#�#�������"�����#"���#�������"+"����"���#����#����������

Working with Material Requirements Plans

5–35OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

7. Work With Routing Master (P3003)

;��#�"�����"�����#"���#�����"+��#�����"����+�#�����*��"#��)��#"��5�#��������#��#�#����#�������-+����� �����#�"�����"�����#"���. ��*�#����#������#���U������$���"���

A�"������#� �����#�����*��"#��)��#"���5�#���������"� ��"�+���#"��������+���������"��#������#���#�#�������"�����#"���#������"+"����"���#�����#����������

8. Item Availability (P41202)

;��#�"�����"�����#"���#�����"+��#�����"����+�#���-#���(��" �." "#�������#��#�#����#�������-+����� �����#�"�����"�����#"���. ��*��#���#������#���U������$���"���

A�"������#� �����#���-#���(��" �." "#���������"� ���"�+���#"�������+���������"��#������#���#�#�������"�����#"���#�������"+"����"���#����#����������

9. Item Cross Reference

;��#�"�����"�����#"���#�����"+��#�����"����+�#���-#������)�+�����������#��#�#����#�������-+����� �����#�"�����"�����#"���. ��*��#���#������#���U������$���"���

A�"������#� �����#���-#������)�+�������������"� ���"�+���#"�������+���������"��#������#���#�#�������"�����#"���#�������"+"����"���#����#����������

10. Item Search

;��#�"�����"�����#"���#�����"+��#�����"����+�#���-#��������������#��#�#����#�������-+����� �����#�"�����"�����#"���. ��*��#����#�����#���U������$���"���

A�"������#� �����#���-#����������������"� ���"�+���#"��������+��������"��#������#���#�#�������"�����#"���#�������"+"����"���#�����#���������

Select Tab

���������"�����#"����"� ���#������" �." "#���+���#�+��#����+�#��#��*�����#"���@���#"#"������� ���#"����� ���

Manufacturing and Distribution Planning

5–36 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

1. Safety Stock

;��#�"�����"�����#"���#�����"+�����#���#����#����.#��#�#����+�#�#��*�+���#���@���#"#�����������;��#�"�����"�����#"���"�����/���#"����"#�#���2�#�(��" �." "#�������"��#���2���"���5��������"�����#"��������#����+�� #�#�.��A� "���� �����3

6 ��* �����#���������#��.#��#��+�#��#��*�+���#���@���#"#����������$ �����#����.#��#��+�#��#��*�+���#���@���#"#����������

2. Negative Quantities

;��#�"�����"�����#"���#�����"+�����#���#����#����"� �������#"�������#�+��#�����������#�@���#"#"���;��#�"�����"�����#"���"����/���#"����"#��#���2�#�(��" �." "#�������"��#���2���"���5��������"����#"��������#�����+�� #�#�.��A� "���� �����3

6 ��* �����#����"� ���� ������#�$ �����#����"� ����� ������#"��������#�

3. Leadtime Values

;��#�"�����"�����#"���#�����"+�����#���#����#����"� ���#�����#�� ���� �� �#��� ���#"����� ����;��#�"�����"�����#"���"�����/���#"����"#��#��<���#"���-�@�"�������"��#���2���"���5��������"�����#"��������#����+�� #�#�.��A� "���� �����3

6 ��* �����#����"� ���#�����#�� � ���#"����� ���+���#���-#���6�����#�. �71:$��9�

$ �����#����"� ���#����� �� �#��� ���#"����� ���

Process Tab

���������"�����#"������"+�����#���#����#���"�� �������=� �������#���"#���������"#����#�=#� "���������.���. "����"���"�@�"��( ������#��������"�����#"���#�����"+�����#���#����#������� "��#���������#�"#��M����#���#����#���"�� �������=� �����"�*�����������"� ��+���#����� �� �#"����+��=#������@���#"#�M��������#���#����#�������#�#�����=#� ��� ��+���������"#���

1. Phantom Items

;��#�"�����"�����#"���#�����"+�����#���#����#����=� ����#������#���#��#�����=#� ��� �������"#�#����"� ����+�#�������#����(�����#���"���� ����+"����+�����"���"���������+��#�"����������2���#���� �����������#��#��#�������������#�.�����. ����#��.���������"����." ��+

Working with Material Requirements Plans

5–37OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

��#�"� �#��#����������"��"���#���." ��+���#�"� �������������#�#���"� ���� ��#����.���. "�����������#�"� ��A� "���� �����3

6 ��* �����#�����"#�#�������#���"#���+���#���"�@�"�������"� ����� �#����.���. "�����������#�"� �

$ �����#���"�� ��������#���"#���"��#���"�@�"��

2. Process items

;��#�"�����"�����#"���#�����"+�����#���#����#����"� ���#�������"#����2����"#���"�� ����#�����������C�����#��.�C�����#�����"����"��#��(��"��#��." ��������#�"������������#�#��#�"���������+����������>������#�"�����"�����#"���������������."����"��#��������������+��#�"���#���"� ��������� �#��#��#����+�#����@�"����#��A� "��� �����3

6 ��* �����#����=� ���������"#���+���#���"�@�"��$ �����#���"�� ���������"#���"��#���"�@�"��

3. Text Lines

;��#�"�����"�����#"���#�����"+�����#���#����#����"� ���#���#�=#� "���A� "���� �����3

6 ��* �����#����=� ����#�=#� "���+���#���"�@�"��$ �����#���"�� ����#�=#� "���"��#���"�@�"��

4. Consolidate Component

;��#�"�����"�����#"���#�����"+�����#���#����#������� "��#����� "��#���������#������������������#�����.�� "#���"��#���." ��+���#�"� ����� #"�����"#�������"++���#��.���. "�������#��������.���. ���#��"++���#����#"����������������#�"�����"�����#"����"#��#�����.���. "�����"�����#"����#����#������� "��#����������#��#�#����.���. �� ��� ��+��� � ��� ��+�#���." ��+���#�"� ��������"��"���#������� "��#����������#��#���@���#"#���@�"���"������� �#���+����� "��#����������#�A� "���� �����3

6 ��* �����#����"� ���"��"�"��� �����������+���� "��#����������#�"�#���"�@�"��

$ �����#������� "��#����� "��#����������#�"��#���"�@�"��

Manufacturing and Distribution Planning

5–38 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

5. Subassemblies

;��#�"�����"�����#"���#�����"+�����#���#����#����"� ���#���.���. "���(��.���. ��"�������. ��#��#�"������#����"���� ��� �#���*��������#������. ���A� "���� �����3

6 ��* �����#����=� �����.���. "��+���#���"�@�"��$ �����#���"�� �����.���. "��"��#���"�@�"��

6. Shrink

;��#�"�����"�����#"���#�����"+�����#���#����#�����/�#�#����@��#��@���#"#��+���"�*�������"�*����"�#���� ������ ���+�������#�"#���������.�+��#��������.��*�����#��+#����#�"��#"��������������#"����A� "���� �����3

6 ��* �����#���������#���/�#�#����@��#���@���#"#��$ �����#�����/�#�#����@��#���@���#"#��+���"�*����

7. Scrap

;��#�"�����"�����#"���#�����"+�����#���#����#�����/�#�#����=#�����@���#"#��+������������"�����. ����#�"� �#��#��� #�+���#��������#"��������-#�"���#�"� ���#"����+����"+"��#"��������+����������#�"#"��#��#���*�"�"����#"�� ��A� "���� �����3

6 ��* �����#���������#���/�#�#����=#������@���#"#��$ �����#�����/�#�#����=#������@���#"#��+������

8. Yield

;��#�"�����"�����#"���#�����"+�����#���#����#�����/�#�#����=#�����@���#"#��+���"� ���>"� ��"�#����#"���+���. ����#��#�+����������#��"#�"���#�A� "���� �����3

6 ��* �����#���������#���/�#�#����=#������@���#"#��$ �����#�����/�#�#����=#������@���#"#��+���"� ��

9. Purchased Items

;��#�"�����"�����#"���#�����"+�����#���#����#����=� ����#��#�����=# ��� ��+���������"#���"��#���." ��+���#�"� ����#��A� "���� �����3

6 ��* �����#����=� ���� ���C ��� ���������"#���+���#������#�$ �����#���"�� ���� ���C ��� ���������"#���"��#������#�

5–39OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Validating Material Requirements Plans

(+#�����������#��#�����#�"� ��@�"����#�� ����������#��� "��#��"#�#������#��#�����������++"�"��#���*����#�������"#���;�������"#�)�@�"����#�2 ���"���7�)29�#����#��"������#���#�����#�"� �� �������.��=���#����"#��#������" �. �������������0������������������.���� ����������

Manufacturing and Distribution Planning

5–40 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

5–41OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Processing Orders for MRP

1���#�����" ������2����#"���C��"��#�������78 $$$9�����������2���"���

(+#���������5)2�)������#"�����5)2�D�#������������#�������2���"��.�#���������#��������� #"� ����*�����������#��3

� (##�����#�����#� "#

� (##�����#�����#"���"�#��#"��

� ��#����"�"#"� �����#�#�

� 8����#��#����������*�#��"�� ��"��3

� 2�#� "#

� )��#"���"�#��#"��

� ��������*�#������

� ��������#���#���

����������#��#��������#�����������+��5)2�"�#�������������#��#�������#�����������+���"#".�#"���)�@�"����#�2 ���"����5�#�2����#"��������� �������)�������#������"#��2 ���"���

See Also

� ����������!��"(������������'���������"��#���'���*��������� ��������

Manufacturing and Distribution Planning

5–42 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Manufacturing and DistributionEnvironments

Manufacturing and Distribution Planning

5–44 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

6–1OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Manufacturing and Distribution Environments

�����H���#���C�"��������+��#�"���#�#��"���@�"��+ �=". ������+��#�"�������"#".�#"����#���

5���+��#�"��������"#".�#"������"�����#����"#��+�#���+� ��"���#�*3

� ��*"����"#��.�#���� ���"��

� ��*"����"#�������� ���"��

� ��*"����"#�����#"#"���� ���"��

����+� ��"�������"����������+��#�"��������"#".�#"������"�����#�#��#����� ���������#"�����+����"��#��� ��C�� ���������#"����+���#��"G����"���#���������"��C�� ���������#"����+�������"#"��

Variety

Job Shop

Batch

Line

Continuous

Volume

1

2

3

4

������"������#��������#�����+��#�����������"��#����#�����#�����+��#�"��������"#".�#"������"�����#�� ����#����"����� ��+�#�������������#"#"��������#�������������������������������������������#��#��"��#�7#��#�"������+��#��������� ����� �����"#��������"�#�9�

Manufacturing and Distribution Planning

6–2 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����#"�������������������"���������#"#"��������#����.�����#"�����"=��C���������+��#�"������"�����#��-���"=��������������"��C�� ��������#����������"��C��"�#�������#����������"#�"��#���������������.�#�"���"++���#�����+��#�"��������"#".�#"������"�����#�

����5���+��#�"��������"#".�#"���2 ���"����#��H��������#�.������"���"=��C���������." "#���5���+��#�"��������"#".�#"���2 ���"������"�� #����� ����������"��#��"#���+����/�.�������#�C.����"#���+����+ ��������������#"�����"#���+���������"���#��

����������������"#".�#"����#�����*�#���#����"#��#�������+��#�"���#���#�������#��#�#���"��#�"#���"�"��#���"��#�� �����#�#���"��#�#"���#����#���#���������������� ���������������������#���#�.� �����#������#��#�#�"�����������1���=��� ���#���-����#���5��������#��#������#���+� ��"��3�

� �#���"#���"�+���#"���+��#�������+��#�"����#��

� �#���� �����������"�����#�����@���#"#"�����" �. ��.�� ���#"��

� ���*�"#�������� ��+�� ���#"���+�����"���������� ����#��

� ;���#��#���"����#���������#�.� �����"��#�������� � ������"#������������"��"����#����� ��#"��������#���"���������������#

�"��#������+��#�"������." ��+���#�"� �������#"��������." ��+���#�"� ���#�"��"��"�"��� ���#�����������#������������#��.� #���"�������� �#"�����#� ���#��+���+"=�������"�. ��@���#"#���2����#����+�#����"�"����"�#��.���. "��#��#��������"����"��� �������. "��

���"�� ��=��� ���+������#��+��"��#������+��#�"�����3

� ��

� 1��"#��

� � ��#��"�

� ("� ���

�"��#������+��#�"���"���� ��+�#��������#�"G���.��#�������+��#�"��#�#��������������3

� 5�*�C#�C#��*���"����"#������"�� �����#"#"��������������.����#��

� (����+�#���K#�C����L���������*�C#�C��������. �C#�C���������"���C#�C���

� ����K���C�++L���/�.��������"�����#

E���-�-+���������+��#��������#��"������+"���#"����5)2�������#������"G����+"��������#"�����"++������+�������+"�����"#������!��"���#�������������'�����)������"��#��'���������������������+

6–3OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Working with Batch Planning

�"#��.�#�������+��#�"�����������#�"������+�����." ��+���#�"� �"���#����������� �#�"G������� �#�"G��"���#��"����.����� �"G����#�������� ���#������"�� ������#�#��#����.�#�������+��#�"���"�� ���3

� 2�������#"��

� 1���

� 8 ��

� 1����#���.������

� 2�"�#

�����./��#"���+��.�#�������+��#�"���"�#���������*������"#����.�#��@���#"#��#��#���������#����.�#���." ��+���#�"� �����#�����#��������+�5)2�����"������#���#���." �#������"@�� ����+"�����." ��+���#�"� ������������#���.�#���@���#"#���"#��." �#����#��+�#�����+"�������"@���." �

�"#��#�"�����+��#�"�����#����������#"�#"�����������"#����#��"���#��"G���+�#���.�#������������1���=��� ��������"��#������#��+" �#�����#�#�����#�"�� ��� �+��#��������#����+������� ��

-�����"#"����#����#������"+"�� ����+"���#�����������#�@���#"#"��+��#��.�#����1���=��� �����4�C�� �����#��@�"�����"����@���#"#���+������������#��.�#�#����#���������#������" �����. ��#�����������#�+���$��C�� �����#���������������#�����+#�����G��������#� �#�

A�#�����+#������"�� �� ���#���� ���#�����������#"#"�������#���������1���=��� ���"��#�������+��#����+�.�����������"��"=������� �+#�#��"��"�����#�.�+���+�����"�#��"��"�"��� � �����������#�+��.�*"����������*��"���

>����+#����=�����"#��+�������+��.�#����"��#����+��� ��������"��#������� "#����*" �����

(+#���������#����.�#���." ��+���#�"� �����.�#�����#"���+��#�����*��������������������#���.�#�����*�����#���##����#�����#� "#�������#"��"�#��#"���#��#�����*��������������������������#������#������� ���+.�#�����*�����������"���#�����#��#�

Manufacturing and Distribution Planning

6–4 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

��*"����"#��.�#���� ���"������"#��+�#���+� ��"���#�*3

� )��"��"���.�#���." ��+���#�"�

� 8����#"���52��+��.�#���."

� )��"��"���.�#�����#��#�+���52��7��#"��� 9

See Also

� !��"���#����������������������"��#����������&�������� ���������+������"�+���#"����.��#�.�#�����#"��

Reviewing Batch Bills of Material

>������.�#���." ��+���#�"� �#�����������#�����"�� ����#�"�#��1��=��� �������"���#"���������#�����������#"�� ���+����"���#"��������������#�#����*�������#�"��+"=���@���#"#"����.�#�����>���������#���������."��#"����+�.�#���"G������." �#�����

Before You Begin

� ��#�#��������"�#������"�����#"���#���"� ���#���6�#���E���#"#��+"� ��

Working with Batch Planning

6–5OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

���������������������������

1���#�����" ��2�5��"��#�������78 �$$9���������#�0�������6" +

$� �����*��"#��6" ��+�5�#�"� ������ �#��#���+� ��"���+"� ������� "�*1"���#�� ���#��#���." ��+���#�"� 3

� -#���D��.�

� 6����02 ��#

� ������+�6"

�� )��"���#���+� ��"���+"� �3

� ;�5

� 6�#���E#�

� ������+�6"

Manufacturing and Distribution Planning

6–6 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����� /&��������

������+�6" (������+"���������7:�0�69�#��#���"���#��#���#�����+

." ��+���#�"� ��>���������+"����"++���#�#�����+�." ��+

��#�"� �+���"++���#�����1���=��� �3

5 �#����������+��#�"���."

)�T )���*�."

�2) �������#�."

�����#�����#��." �#����5�"��#�����*����������

������������#������*�������� ���������"+�

���#���." �#����������#�������#���." �#�����������

#�����*�����������#��*������"���." ��+���#�"� �#�

���#�����#��#�����*�������#� "#��5)2����#���."

#���������#��"���#"+��#���." ��+���#�"� �#����������"#

�##�����5)2��������6�#���." ��+���#�"� ���#�.�

#����5�+������+ ������������#�������#���#"�������

5)2�����"���

6�#���E#� ����@���#"#���+�+"�"������"#�#��#������=���#�#�"�." ��+

��#�"� �����#"���#����������>����������"+�����"��

@���#"#"���+���������#�.�������#��������#��+

+"�"������������������1���=��� ���$��������+

� ���#�"��@�"��������"#����#��$�����"#��+�+"�"���

�����#��F�������"+�������"#��+�+"�"���������#�"

������������������+�� ���#�����@�"������+"�"���

��"#��-��#�"��=��� ���������� ���#����.�#���@���#"#"�

+��$�������������"#��+�+"�"���������#�����"+�"���#��

����������#��+�� ���#������"#�

See Also

� !��"���#������������������"��#����������&�������� ���������+�����"�+���#"����.��#�.�#���." ��+���#�"�

Processing Options for Bill of Material Revisions

Defaults

1. Component Branch ____________

Blank = The system uses component branch when copy BOM. 1 = The system uses parent branch when copy BOM.

2. Bill of Material Type ____________

Blank = The system uses M for manufacturing bill of material.

Working with Batch Planning

6–7OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

3. As of Date ____________

Blank = The system uses all dates. 1 = The system uses the current date.

4. Display Sequence ____________

Blank = The system sequences by component line number. 1 = The system sequences by component line Number. 2 = The system sequences by operation sequence number.

Display

1. Bill Type ____________

Blank = The system does not display the Bill Type field. 1 = The system displays the Bill Type field.

2. Batch Quantity ____________

Blank = The system does not display the Batch Quantity field. 1 = The system displays the Batch Quantity field.

Versions

Enter the version for each program. If left blank, version ZJDE0001 will be used.

1. Single Level BOM Print ____________ (R30460) 2. Multi Level BOM Print (R30460) ____________ 3. ECO Workbench (P30225) ____________ 4. Component Maintenance (P3015) ____________ 5. ECO Header [P30BREV] ____________ 6. Bill of Material Where Used ____________ (P30201) 7. Item Master (P4101B) ____________ 8. Co/By- Products Inquiry ____________ (P30211) 9. Bill of Material Inquiry ____________ (P30200)

Edit

1. Item Branch Validation ____________

Blank = The system does not check to see if the item branch is valid. 1 = The system checks for a valid item branch record.

Manufacturing and Distribution Planning

6–8 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Interop

1. Transaction Type ____________

Blank = The system does not perform outbound interoperability processing. JDEBOM = The system performs outbound interoperability processing.

2. Write Image for a Change ____________ Transaction

Blank = The system stores the after image from F3002 to F3002Z1 1 = The system stores the before image from F3002 to F3002Z1

3. Interoperability Outbound ____________ (R00460)

Blank = Ths system uses the ZJDE0001 version of R00460.

Generating MPS for Batch Bills

1���#���'"�� ���"#��2�"��"��2 ���"�������#"��������78 :��9��������52�)������#"���

;��52��)������#"���#�������#������#������� ��+��� �"#�����+��� ��#��"#������"�������+���#"����"++���# ��������"���������#�������#�������.�#���." ��="#�

-+��� ������.�#���." ��="#��52�����#���.�#���@���#"#����+� ��3

� (����� #"� ���"+�#�����#��@�"����#�������#��#����#���.�#���@���#"#�

� (����"�"�����"+�#�����#��@�"����#���� ��#����#���.�#���@���#"#�

-���"#��������#��������������#��������#��� ����������+�������.�#��@���#"#��

1���=��� �3

6�#���E���#"#� 52��)�@�"����# )�� #"���52��2 ��������

$��� $4�� $���

$���

$��� %&! $���

Working with Batch Planning

6–9OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

-+�����.�#���." �"����#��#����� ��+�#���.�#���@���#"#"���#������������#�� ���#�.�#���@���#"#��"�����."��#"����"#�������+�#����#���@���#"#"��#����#�����#� ���#"+��#����@�"����#�

1���=��� �3

6�#���E���#"#� 52��)�@�"����# )�� #"���52��2 ��������

:��

&��

���

$���

$4�� $���

&��

:��

&��

���

$���

��� $���

$���

$���

-+��� #"� ��.�#���." ��="#�����#�����#��@�"����#�"� ��#����#��� ���#�.�#��@���#"#���#������������#�����=#��"���#�.�#���@���#"#��#���#"+��#���@�"����#�

1���=��� �3

6�#���E���#"#� 52��)�@�"����# )�� #"���52��2 ��������

:��

&��

���

$���

!�� ���

>������������"��#���������� �#����#���+����� � �����"����-��#����� � �����"�����#�����#����#���� �������#��������"#��"�� #����� ��.���"����� #"� �����������"���#����#�*��� �����������#����=���#����.�#������������������#��#��������#��������������������� � �����"�����#�������"����"��"+"���#���+���������"�����"��

��� "�"#����� ��.��#������.���+�������#��#�������" �. �������������

�����#������#��������#���.�#�����"���#�������� � �����"����-�#�"���"����#����#������������"�����#"���#��#�"��"��#��#������.���+���+"�����������#��#�#����#������#���=���#��#����.�#�����"���

See Also

� �������������������������������

� ����������'�����,$���������'��������+��#�������"�����#"���+�#�"������

Manufacturing and Distribution Planning

6–10 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Reviewing Batch Output from MPS

(+#�����������#������#������� ������52���"�����"��-�@�"������52���#�" �5�����)��"���#����"���#���#"����"������������+���#���52������#"����

����#"����"��"���������+�#"��C��������� ���������������##"���+�� ��#���"#���������������+ ��#�����#����#������.�#����#�������#�����@���#"#"��+����#��@�"����#�+�������#"�����"���

)��"��"���.�#�����#��#����"#��+�#���+� ��"��3

� )��"��"���#���#"����"��+��.�#�����#��#

� )��"��"�����#"���������+��.�#�����#��#

See Also

� �����#������2� �'�����+������"�+���#"����.��#��"�����"��-�@�"������+��#�������"�����#"��

� !��"���#����������+��#�������"�����#"���+��52����#�" �5����)��"��

���%��'��������������������������

1���#���52����" ������#"��������78 :$�9��������52���"�����"�0(�2-�@�"�+

Working with Batch Planning

6–11OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

$� �����*��"#���"�����"������� �#��#���+� ��"���+"� ��#�� ���#��#��#"����"��+������"#��3

� 6����02 ��#

� -#���D��.�

�� ��������#���@���#"#��#����#��#���������@���#"#��"��#���#"����"��� "�*�#���+� ��"�����#"�������#����� "�*�1"��3

� ������6 ��*�<"��

���%��'���������������������������

1���#���52����" ������#"��������78 :$�9��������52����#�" �5����)��"��+

�����*��"#����#�" �5���������� �#��#���+� ��"���+"� ������� "�*1"���#�� ���#��#���������+������"#��3

� �������6����

� -#���D��.�

Manufacturing and Distribution Planning

6–12 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

6–13OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Working with Process Planning

2��������+��#�"����� #�"�������#������� "@�"���+".����������������2�������#"�� ��+���#�++������.����������#��"�� ��=��� ���+����������#��2����#�������#���������� ������+��#����.���#��C#�������3

� 5"="�����. ���"��

� 1" "��������*��"��

�����*"����+������#��"��#�"��� ���"�#����"�#��#������������"���.�*"�����������#"���

2��������+��#�"������"����"��#�����." ��+���#�"� ��-����"��#�����.��"#�����������������������"���#�������+��#�"���������-��������." ��+���#�"� ��#���@���#"#���+�����������#��������������"���#��"#���������#�����

;�"@���+��#����+����������+��#�"�����3

� 2��"�����C�����#

� 2 ��������C�����#�7.�C�����#������� �����9

� (��"#"��� �����"�����#"���"��52�05)2

2��������+��#�"������������C�����#�����.�C�����#��(���C�����#�"��� ��. ������"#���#��#��� #�+�����������(�.�C�����#�"�����#�"� ��+��� ��#��#�"���������"��"���#� �#���������"��� ��+�#��������

�����"++���#�#�����+����������+��#�"�����3

� 6�#��

� ���#"����

-��.�#�������"����������� ����������������#�"����#����������� �#�"G���#��"����.����� �"G��� "����#�����#��������� ���#���6�������+�#��� "+���� ���+�#��������#��+#��"#����� �#"��������#��"�� ������� ��"#��������#�"����"����#������#"���������C�����#�����.�C�����#�����.�������#����"���.�#�������"�������"�� �"#������������"#��.�#�������"���"�� ���3

� 2�������#"��

� 1���

Manufacturing and Distribution Planning

6–14 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

� -�*�������"�#

� 8 ��

� �" �������"�� ������#

-��#������#"�����+ ������"�����#�������#"������#��"�� �����#"����+�����=#���������#"�����@�"����#�"����"��#���#�����������#��������#� "������"��#�����+�����+��#�"���"������#�"G���.���"++"�� #��"����#��"�����#��#�� �����"#����������������"����"� ��+������������#"�����=��� ������#� ���C.���������#�������#����"+"��#"������C�����#�����.�C�����#�������� ���������� ��#�"�����#"���������"���#����"��.�#�������"���

52���� �� �#��#���#"����"��+����C�����#���������+��#�����C�����#�����#��52������������#���"���#��������#"�����������C�����#�#��#���+� ���#"+"���.��#�������������#����"��������������2������"��#� ����*����.�C�����#�#��#������ ����.�#�"���#�#������#� ��������+�#��������1���=��� ���#��� �."���#�����������C�����#��+������� � �."���#���������"#�� �."���#��������.�C�����#��+� ���������� �."���#��� ����#�.����������"��" ��#���.#�"�� �����

;�� ���.�#��.�#����������#"���������"�����#�����@�"���=#��"�������*���"��������������"���@�� "#������#� �������� �����"���#������������#"�#����������#�� �#�#��"�������#��*"���

���"���#"+�����"#���+�����������+��#�"����������#���+"���#���"#��H#��*"���#����#���"#"���"��"#�+�����C�����#����"��#��"#����>�����#�#������"+��.�#��#��������#�����+�#����������+����C�����#�#��#�"��#"+"���+���������*���������#��������#����#��#�"��#"+"���+����#����������������*�����+��#�����C�����#��>�������#���������#��������"������#������� ���+�� ��������*�����������#��#����"���#��#����"#��+#"����"������������+��#�����C�����#�����.�C�����#�

��*"����"#�������� ���"������"#��+�#���+� ��"���#�*3

� 8����#"���52��+��#��������"���#�

� )��"��"����������#��#�+���52�������#"��

Before You Begin

� ��#����#���#��*"���#����+��� �"#��������&�������'���"���2�����������������

� ��#����#�����C�����.�C�����#������&���������,�������������,���������

Working with Process Planning

6–15OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Generating MPS for the Process Industry

1���#����"�� ���"#��2�"��"��2 ���"�������#"��������78 :��9��������52�)������#"��+

���������������52��)������#"����#����#��3

� ��� ��#��� ��#���"�+���#"��

� 2�+����� �� �#"��

� 8����#����#"����"������������+��#���� ��#���"#��

>������������"��#���������� �#����#���+����� � �����"����-��#����� � �����"�����#�����#����#���� �������#��������"#��"�� #����� ��.���"����� #"� �����������"���#����#�*��� �����������#����=���#����.�#������������������#��#��������#��������������������� � �����"�����#�������"����"��"+"���#���+���������"�����"��

��� "�"#����� ��.��#������.���+�������#��#�������" �. �������������

�����#������#��������#���.�#�����"���#�������� � �����"����-�#�"���"����#����#������������"�����#"���#��#�"��"��#��#������.���+���+"�����������������#������#����������#���=���#��#���.�#�����"���

See Also

� �������������������������������

� ����������������'����������'���������� �

Reviewing Process Output from MPS Generation

(+#�����������#������#������� ������52���"�����"��-�@�"������52���#�" �5�����)��"���#����"���#���#"����"������������#��#�#����#�������#���

5������������������� #"� ����C�����#��-�������#"�����"������"�������C�����#����#������#���������"�#������"�����C�����#��1���=��� ����������"��#��������.�#��� �#"�������#�� ����� ��� �7��#"C+��G�9��-+�#����"���#���������+��� �#"��"����#"�����"����#����#���� ���+��#�������.�������#����������+��� �#"�����"����"��#��� #�"���=�����#"+��G������#"���

����#"����"��"���������+�#"��C��������� ���������������##"���+�� ��#�����C�����.�C�����#����C�����#�#��#����+� ���#"+"���.��#������������#����"��������������-�#�����#����#������#�����"��������+����C�����#�#��#����� ������.���������

Manufacturing and Distribution Planning

6–16 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

E���3�2����"#������.�������#��������#"����"��

)��"��"����������#��#�+���#���52�������#"���"�� ����#���+� ��"���#�*3

� )��"��"���#"����"��+����C�����#�����.�C�����#

� )��"��"���������+�������

���%��'������������������������������������

1���#���52����" ������#"��������78 :$�9��������52���"�����"�0(�2-�@�"��

$� �����*��"#���"�����"������� �#��#���+� ��"���+"� ��#�� ���#��#��#"����"��+������C�����#���.�C�����#3

� 6����02 ��#

� -#���D��.�

�� ��������#���@���#"#��#����#��#�����������#��"��#���#"����"���� "�*#���+� ��"�����#"�������#����� "�*�1"��3

� ������6 ��*�<"��

Working with Process Planning

6–17OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

���%��'�������������������

1���#���52����" ������#"��������78 :$�9�������52����#�" �5����)��"��+

�����*��"#����#�" �5���������� �#��#���+� ��"���+"� ������� "�*1"���#�� ���#��#���������+���������"#��3

� �������6����

� -#���D��.�

E���3���C�����#�#��#����+� ���#"+"���.��#�������������#����"������������

See Also

� !��"���#���&�� �'(�����

Manufacturing and Distribution Planning

6–18 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

6–19OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Working with Repetitive Planning

;�����#"#"�������+��#�"���+���"�� �����#"#"��������#"���#��#�� "�����������#"����#���)���#"#"�������+��#�"������. ������#�����"+�����#������� �.���++��#"�����#��"����" ������* ��������#� ��@���#"#"��

)���#"#"�������+��#�"������#���+� ��"��������#�"#"�3

� 2����#"����� ����"�#�. ���������"�#�. ��

� <���#"���"���#�

� 1��#��� ����#�"������#C�"��#��������+#��������#�"G�����K�� � �����+��#�"��L�"����"����""�" ������#"���������"�� ����������#��#�#��������#�+ �����"� ��+�����������#"���#��#�����=#�

� ��#��������#���#��#��"#��"���.�#����������#�������#�"��"+"���# ��++��#�#���#"������" �. ��+�������#"���

� 8����#����� ����"��+#���"������#���"�#��#�����"������"���"����������+��#�"������"���"���#�����������#��������"�#���"#�� "## ���++��#�����#��������#"��������

� ;�"#��+�������"��+#���K�����L�F�������"#������ ��.���� ���C����"��#C� �#��������"#�"�����"��������"�����#�#��#�"�"�" ��#����������+��#�"���7���������#���"��#�9�

�=��� ���+����#"#"��������#���3

� � ��#��"������

� (�#���." �

� ���. ��������������7���"�������"�����+"���#�����������9

���� ���+����#"#"��"#�������3

� -���#"+��#���"#��������#�C����� ���"#���+�������"+"��.����0� ��#

� ���#������#"���+��#���"#��

� (##����#����#�C����� ���"#���#���� "��

(+#�������#����#�������"���+�����#"#"���"#�����������������#������#������ ��������"���#�����#��#����"���#��#����"#��+�#"����"������������>�������#������ "��#��#��� ������� "������� �.���"��"���#����++��#�+����#������� ��������"������*����#��������/�#"���#����"�"#"���+�#������� ��

Manufacturing and Distribution Planning

6–20 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

��*"����"#�����#"#"�������+��#�"������"#��+�#���+� ��"���#�*3

� 8����#"���52��+�����#"#"���"#��

� )��"��"������#"#"�����#��#�+���52�

� )��"��"����#������� �� ���

Before You Begin

� -���#"+��#����������"�#�+�����#"#"���"#��������&�������(�����������

� �����#��#�� ���#"�������#���������0���������������������������

� �����#��#�� ������#"��� "������"���#"+"����������������$��������� ��������������

� �����#��#�� ��#������� ������#���������0������������'���������

Generating MPS for Repetitive Items

1���#����"�� ���"#��2�"��"��2 ���"�������#"��������78 :��9��������52�)������#"���

������������#���52��D�#����������)������#"����������#����#��3

� ��� ��#��� ��#���"�+���#"��

� 2�+����� �� �#"��

� 8����#����#"����"������������+��#���� ��#���"#��

��������#��52��+�����#"#"���"#��3

� ��#�#�������"�����#"���#�������#��#�����#�������#"�������� ��

� ��#��#���#�����+�#������� ��#��#��������#�#�����+������"���

� ��#�#��������"�#������"�����#"���#���=#�����#����/�#���#�#� ���C ��� �"#���

>������������"��#���������� �#����#���+����� � �����"����-��#����� � �����"�����#�����#����#���� �������#��������"#���"�� #����� �.���"����� #"� �����������"���#����#�*��� ������������#����=���#���.�#������������������#��#��������#���������������������� � ����"�����#�������"����"��"+"���#���+���������"�����"������ "�"#���� ��.��#������.���+�������#��#�������" �. �������������

Working with Repetitive Planning

6–21OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

�����#������#������#���.�#�����"���#�������� � �����"����-��#�"��"����#����#������������"�����#"���#��#�"��"��#��#������.���+���+"�����������������#������#����������#���=���#��#���.�#�����"���

See Also

� �������������������������������

� ����������������'���������������� �

� ����������������'����������'���������� �

Reviewing Repetitive Output from MPS

(+#�����������#������#�������#"�������� ������52���"�����"��-�@�"�����52����#�" �5�����)��"���#����"���#���#"����"������������#��#�#���#�����������#���

����#"����"��"���������+�#"��C��������� ���������������##"���+�� ��#���"#���������#��� "�*�#���� ����������� ����+��#�������#�"#��#��#�������@�"����#��+���������#�"#���

-+�����������#�������#������"#������#������� ���#����#������ "��#���������+���#�������#�"#���������������+���#����#�C����� �������#+� ���#������� ��"������� ����*����A���������#������� ��"������+������������#��+����#�C.��������#��#����� �� �#"���"�� ����#���"�+���#"��+��#�����������#�"��.�#��#����#������� ��7O)�9���������/�#����#������� �7O)�;9���#�� "����������������#�"������������� ���������� ��5)2� ��"���� "��

Manufacturing and Distribution Planning

6–22 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

�����������+ ��#�����#����#�������#�C����� ���"#���#�������#�@���#"#"��+����#��@�"����#�+�������#"�����"��������52�05)2�������������#���+� ��"���#������"����#"���������#��#���#�"��#�����#"#"��"#��3

�>�������������� ;���#������="#"����#��#��#���"�������@���#"#��

�>$������������� ;���#������="#"����#��#��#�����������@���#"#��

E>���������� ���#����������������+���#���52�05)2���#�"

5�����)��"���+����>����������������#�������

�������#���#"���

-�#�����+����#"�����"�� ���#��+�����"��������� �

��"���#������������#��������#����#������#�����"�

�+��#��#�������#�����#"����"����1��"�#������"�#�����+

���"����������* ���#��"���++��#�+��+������*��#��

�#������#��+������* ���#��������"���++��#�+���

���*�

�������������������#��)�#���������#����#������

�##����#�����#� "#�������#"�����#���#"�� ��

�����#����#���������������#������#���#��7-�����F������9��"#������#�����*�#����� "�"#���+�#�����#�����"���������52�05)2�������#"����������������"#���� "����#���F����������������������#������#�.�+�������"���#����������������"������#"���"��� "���#��������#���� "�"#���+�#�����#��#��#�������#�����������������������������#��.�+������"���

)��"��"������#"#"����#�C����� �����#��#����"#��+�#���+� ��"���#�*3

� )��"��"���#���#"����"��+���#�C����� �����#��#

� )��"��"�����#"���������+���#�C����� �����#��#

Working with Repetitive Planning

6–23OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

���%��'�����������������������������������

1���#���52����" ������#"��������78 :$�9��������52���"�����"�0(�2-�@�"��

�����*��"#���"�����"������� �#��#���+� ��"���+"� ������� "�*�1"���#� ���#��#���#"����"��+������"#��3�

� 6����02 ��#

� -#���D��.�

Manufacturing and Distribution Planning

6–24 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

���%��'������������������������������������

1���#���52����" ������#"��������78 :$�9��������52����#�" �5����)��"���

�����*��"#����#�" �5���������� �#��#���+� ��"���+"� ������� "�*1"���#�� ���#��#���������+������"#��3�

� -#���D��.�

� �������6����

See Also

� !��"���#���&�� �'(�����

Reviewing Rate Schedule Loads

;�������� ��)��"���#����"���#����#������� �� ��������#�����*����� ���+������*����#��+������������*�������#���>�������� ��� ��#������"+"����#������+����"���#���"���#��� ����+��#�����*����#���-+����������#����/�#�#������� ��� �����#�#�����*����#�������������������� �+���#����*���/�#���#��

������ ��)��"���"������"��" ��+���#�C.����"#�������"����� #���#"���+��"��"���#��� �����������*����#���(�����"�����#"���� �������#��"�� �����*����C�����#��� ����.�+������+#���#�� ����

Working with Repetitive Planning

6–25OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

See Also

� �����#�������'����������!��"������$����

Manufacturing and Distribution Planning

6–26 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Material and Capacity Planning Setup

Manufacturing and Distribution Planning

6–28 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

7–1OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Material and Capacity Planning Setup

>�����#����� �#���#���#�*��"��#���"���#�����#�"� ����������"#��� ���"���#������#���"�� ��������#�*�����#�"��������+"����������"#��"�+���#"��������#���� ��+��#���� ���"����#���

��##"��������#�"� ����������"#��� ���"������"#��+3

� ;���#���"���;���+��5���+��#�"��������"#".�#"���2 ���"��

� ��##"������#���� ���"����#��

Manufacturing and Distribution Planning

7–2 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

7–3OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Understanding UDCs for Manufacturing and DistributionPlanning

5����+"� ��#�������#�#���� ���"����#��������#��� �������+"��������7;��9��>��������#����+"���#���������.�+��������������#���� ���"���������1���=��� ���.�+������������#�����������@�"����#�� ���������#���+"���#���"�+���#"���#��#�#����#������#��� ��#������"� �����#��

;������#����"��#�. ��.���#������������#�����1���=��� �3

� 0;�������#�#����)2��#������������+"���������;�"#�����

� ��#��� :��#�����1�7 :0�19������#�#����)205)2052���#�����������+"����������"���1����

����#����;���+��#���� ���"����#����������#�"���#"+��� �#��������������#�#��������#���;����+"���������+����-+�������#���������#"���#�#������������#���+���#��#������"����#�"���#"+�����������#"���#�#���������#���;����+"���������+����#����#����"� ����������������1��=��� ������������� ����#�������"��#�������#"���#�#�������+"� ��#��#��="#"��#���;���#�. ��+���#��� $�����#�������

>������������� ������#��������"�� ��;���+����(+#������� ��#���;��+���+������������������#����#�����������������+"���������#����+"� ��#���������#���;���#�. ��������#���#��������+"���������"��#���;���+"���������#�. ��71���49�

����+� ��"���;�������"����#�������"#������������� ���"��3

� �����"#��)�@�"����#��"� ���7 0�)9

� )�������#������"#���"� ���7 0)�9

� )������)�@�"����#�7 0))9

� ;�"#������7 0;�9

����+� ��"���;�������"����#���)2��5)2������52�3

� 5����������7 :05�9

� �"���1�����)� ��7 :0�19

Manufacturing and Distribution Planning

7–4 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

See Also

� ����� �/�������&������������"��#���(��!����*���������������+���#�" ���"�+���#"����.��#������+"��������

Capacity Requirements Display (33/CR)

�����#������ 0�)���#��������+"���������+��#��������"#��)�@�"����#�"� ����;��#��������"#���@�"����#��"� ���#�����"+��������"�#"���+�� ��)2�+����������#��

Rough Cut Capacity Display (33/RC)

�����#������ 0)����#��������+"���������+��#���)�������#������"#��"� ����;��)�������#������"#���"� ���#�����"+��������"�#"���+��)��2+����������#��

Resource Requirements (33/RR)

�����#������ 0))���#��������+"���������+���������@�"����#������������@�"����#��"� ���"���#"+"��#���#�����+� �����������*����#��>���������"���#�������#���)��"�����*����#��<����+����

Unit Types (33/UT)

�����#������ 0;����#��������+"���������+����"#�#�����>��������#�"���#"+��� �#����"++���#�#�����+���������"#�#��#�����.�����"�#����"#�������*����#���

Message Types for DRP, MPS, MRP, and RCCP (34/MT)

�����#������ :05����#��������+"���������+��������#�����( �#���������������+"����+��#����������#��#�#����#����"� ����������������#���)2��52�������������6������#��������#�������"��������������������������#������"�#"���.�#���#�#���+���#"����+�#���������#����

Understanding UDCs for Manufacturing and Distribution Planning

7–5OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Time Fence Rules for DRP, MRP, and MPS (34/TF)

�"���+����������"�#��+�#"����#���"�������������*���������#���"#����� "��������#"�����������������#������ :0�1���#��������+"���������+�#"���+������ ��������#�������#�#����#"���+����3�

����(��������� �"#�"��#�"�#"�����"�������������"#������#�����

�� ������

���������������� �"#�"��#�"�#"�����"����#����#�������������+���#��

+����#�������#��������#���� �� �#�����"������" �. �

�����#�

,������$����������

�$�

(+#��#�"�#"�����"���������������"#������#�����

�"� �����

Manufacturing and Distribution Planning

7–6 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

7–7OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Setting Up the Planning Systems

>�����#���+"���#���"�+���#"���#��#�#����#�����������"#����#���� ���"����������� "���������������#�������#���"�+���#"���#����#��"������#��� ��#������"� �����#���>�����#��#���������+�#�"�"�+���#"���"���#���#����������#���-����#���5��������#�7�#���:$9��2����#���#�5��������#�7�#��� �9�����������1 ���5��������#�7�#��� $9��

����#����#���� ���"����#�������� �#��#���+� ��"���#�*3

� ��#������� �������������"�� �"���� �

� ��#����+����#�������#"�����"���7��#"��� 9

� ��#���������� "���� �

� ��#����#��*"���#���

� ��+"���#���#��*"���#����+�������

� ��+"�����C�����#�����.�C�����#

� ��+"�"��������� "��

� A�"+�"������#"#"�����#"��

� ���#"��� "�������"#���� �#"���"�

� A�"+�"����#������� �

Setting Up Supply and Demand Inclusion Rules

>����#������� �������������"�� �"���� ��#���"���#������ ������������+�����"#��������������+�#����@���#"#"��"����� ��������������@��#"�������+� ��3�

-��������%������ E���#"#���������

�������������� �����@���#"#���������������

Manufacturing and Distribution Planning

7–8 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

,������������'��

������

E���#"#����#���������*�����C�@���#"#������ �#���C

@���#"#��������

���������� ��+�#��#��*

����������� E���#"#����#�������� ������C�@���#"#���"�����C

@���#"#������� ��

"�� �����

��+���������

E���#"#���@�"���C�@���#"#��"���

���3��������������

����'�� ������

E���#"#��������C�@���#"#������ �#���C�@���#"#��������

��������������������������������

1���#���5�#�"� �2 ���"�����#��������78 ::�9����������� �0������-�� �"���)� �+

$� �����*��"#������ �0�������-�� �"���)� ������� �#��#���+� ��"��+"� ������� "�*�1"���#�� ���#��#���#�#���� ���+������"�� �"�������3

� )� ��A�"��

� �*"��#����������

Setting Up the Planning Systems

7–9OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

�� ������#�����*�����#�#���#��#��������#�#��"�� ����"��������� �������������� �� �#"�������� "�*��� ��#�

����� /&��������

)� ��A�"�� (������+"���������7:�0)A9�#��#�"���#"+"�����"�� �"��

� ��#��#��������#�#����#���#�����+��#�"�.����0� ��#�

����5���+��#�"���������������5��������#��#��

���"�� �"���� ����+� ��3

� 1��5���+��#�"��3( ����� #"� ����"����+�������� ��+����"���52���5)2�����)2�

� 1����������5��������#3( ����� #"� ����"����+�"�� �"���� ��+����"�����#����������"�*"���������#���������� ��#�������� "���#��#���#���#��"�� �"���� ��+�������"+"���.����0� ��#�

-+����� �����#�"�+"� ��. ��*��#����#���������#�����#�

#��������"#��� ���������������#������*�������������

#���#�#���+�����*�����

Manufacturing and Distribution Planning

7–10 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����� /&��������

�*"��#���������� (������+"���������7��0��9�#��#�"���#"+"��#���#�����+

�������#����"������� ��"��"��#��#����"�"���+�#��

#����#"�������������������������������#�#���

�����+����������"���"�������"�#������#"������#�

��"������#����#���#"���++�#���#"����"���#�����#

�������7�������#"�������#�� +C.� ���"�����������

�"�"�� ����#��#����9

����+� ��"����������#�#���������+"����.������

������������� ����#�.���������3

2 (�����#�2���. ���������#

) (�����#�)���"��. ���������#

� 2��� ��������#

- -����#����������#

� 2����������2���"����������#

� 8���� �(�����#"��0��"�#�-�#��#�6" "��

�������#

� �� ������2���"����������#

�� ��.���#��#

�2 2���������

)� ���#��#�6" "��

Processing Options for Supply/Demand Inclusion Rules

WO Types

1. Enter the WO document types for the Inclusion rules. These can be stacked up one after another for multiple document types. If left blank, “WO” will be used.

Work Order Document Types ____________

Setting Up Forecast Consumption Periods

>����#����+����#�������#"�����"���#��"���#"+������"����+�#"���"����"��+����#������������.��� ������������#���#���#�"�"�+���#"���"��#��1����#�������#"���2�"���#�. ��71 :�49�

>�����+"���#���������#��+�������+����#�������#"�����"������#���1����#������#"���2�"���+����������"������ ���#��C�"����>��������#������"++���#�+����#�������#"�����"���+���"++���#� ���#"�����.����0� ��#�

�����#�������#���+����#�������#"�����"���#��#������.���+�#"����"���"���#��#��������"+"���"��#�������"�����#"���+��#����)2052�������#"�������������#�#� �+��� �#"�����"��������#��=�����4��

Setting Up the Planning Systems

7–11OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Before You Begin

� A�"+��#��#�#���+� ��"���"�+���#"������.�����#���3

� 2 ���"���+������ ��F�"�������+"��������� "#� :0�1

� ��������#����"�������+"��������� "#�:�0�1��#��"�� ����"��"����������� �� �#"��

� ����C�F-2�@���#"#��#����"�������+"��������� "#� :0E���#���� �� �#��"���������@���#"#�

� ��������#����"�������+"��������� "#�:�0-;��#������#��"����#��7"�� ��������#������9

� ����2 ���"���1�����)� ��+"� �����#���2 ��#�5���+��#�"�����#�+�����"#������ ����+�F

� ����2 ���"���1�����+"� �����#���2 ��#�5���+��#�"�����#��+����"#������ ���.������#��������+�#���� ���"�����"G��

� ���������"�#������"�����#"���"��#����)2052�������#"�������

E���3�>�����#��#����#���� ���"���+�����+"� �����2 ��#�5���+��#�"�����#��"#������ ���.������#��������+�#���� ���"�����"G����7���������������������� ���"���+������+�%%%9��-+����������#��#�#���� ���"���+����.������#���� ���"�����"G����#���.�#���� ���"���������7�)2052�05)2)������#"�������D�#�������9��" ���#���*����� ��

�����������������������������

1���#���5�#�"� �2 ���"�����#��������78 ::�9��������1����#�������#"��2�"���

Manufacturing and Distribution Planning

7–12 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

�����*��"#��1����#�������#"���)��""�������� �#��#���+� ��"��+"� ������� "�*��T3

� 2�"���������#�

� 2�"�������

����� /&��������

2�"���������#� (���#�������"���#�����+"������"�������

2�"������� (�#�����+������#��.������"�����/���#"����"#��1����#

������#"����A� "���� �����3

1� 1����#�������#"�����"��

�� �"����"��.��*�#

Setting Up Order Policy Rules

>�����#��#���������� "���� ��#�����#� ������� #" ��� ���#������� "���� �� �#����#������@���#"#"������������� "���� ��#��#������#������3�

������������ -�� ����#���"#���"��#����)2��5)2����52��� ���"������

�����#������� ���"��������#�������#���"#����;�

� ���"��������$������� �+���� #"C ��� ���#�

����� "����;��� ���"��������:�����4�+�+����#"��

�"#����� ���"���." �

Setting Up the Planning Systems

7–13OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

-������������� ��"���#������ ��"++���#�� ��+������"��

"����#�"���"�� ��"���+"=�������@���#"#��� �#�+�� �#���

���.���+�������� "����1���=��� ��������"����

%�C������� ���+�AC�����"���

9���������%�����

�����������

-��"��#��#���#��+����������� ���#"���+�����"#���#�

�����#��#����������"#�"��#��*����#"���

>�����#��#�#��� ���#"����+�#�������#���"#���#��G����

#��#�#�������#�� ���������������������"��# ��#��#��

��#"�����������@�"����#��"#���#�.�"����++�#�.��#��

���#"���������#����� #"� "��#���� ����������.��#��

+��#���� ���"��������#����.�+���� ��"���#���� �����

��������������#�����@�"����#�

��������������������

1���#���-����#���5�#�0�����#"��������78:$$$9��������-#��6����02 ��#�

$� �����*��"#��-#���6���������� �#��#���+� ��"���+"� ������� "�*�1"���#� ���#��#���"#���+����"����������#�#��� ������3

� -#���D��.�

�� �����������������������(��"#"��� ���#���-�+���#"���+���#���)�������

Manufacturing and Distribution Planning

7–14 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

� ���(��"#"��� ���#���-�+������� �#��#���+� ��"���+"� ��#�����#� ������ #" ��� ���#������� "����� �� �#����#������@���#"#"�������#����� "�*�T3

� ����2� "�������

� 2 ���"����"���1��������

� <���#"���<���

Setting Up Stocking Types

��#������#��*"���#����+�������"#���#��"���#"+����������#��*�"#�7+���=��� ����+"�"����������������#�"� 9��

���������� ������

1���#���-����#���5�#�0�����#"��������78:$$$9��������-#���5�#��

Setting Up the Planning Systems

7–15OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

$� �����*��"#��-#���5�#��6��������� �#��#���+� ��"���+"� ������� "�*1"���#�� ���#��#���"#���+����"����������#�#��� ������3

� ����-#���D��.�

�� ������#������������� "�*��� ��#�

� ���-#���5�#��)��""�������� �#��#���+� ��"���+"� ��#��"��"��#���������#��*�#���"#�������� "�*��T3

� �#��*"�������

Manufacturing and Distribution Planning

7–16 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����� /&��������

�#��*"������� (������+"���������7:$0-9�#��#�"��"��#����������#��*

���"#����+���=��� �����+"�"���������������

��#�"� ������+� ��"���#��*"���#����������C�����

����������� ����#��������#���3

� 2���#���"#��

6 6� *�+ ���#��*

� ���+"�����"#��

� ��������0����#"�����"�#������

1 1��#��

T T"#�����#�"#��

D D��#��*

����+"#������#���+����"�#"�����"��#��������+"���

�����#�. ��"��"��#��"+�#���"#���"���������729��

����+��#����759�

Defining the Stocking Types for Processes

>�����+"���#���#��*"���#�����+������#���"#"���"��#����������"#���+��"#���C�����#����"��#��"#���

�������������� �������������������

1���#���-����#���5�#�0�����#"��������78:$$$9��������-#���5�#�+

Setting Up the Planning Systems

7–17OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

$� �����*��"#��-#���5�#��6�����#�� ���#�����������"#������������ �#��#���+� ��"���+"� ������� "�*�1"��3�

� ����-#���D��.�

�� ������#������������� "�*��� ��#�

� ���-#���5�#��)��""������#�����)�"��#���+� ��"���+"� ������� "�*��T3�

� �#��*"�������

����� /&��������

�#��*"������� (������+"���������7:$0-9�#��#�"��"��#����������#��*

���"#����+���=��� �����+"�"���������������

��#�"� ������+� ��"���#��*"���#����������C�����

����������� ����#��������#���3

� 2���#���"#��

6 6� *�+ ���#��*

� ���+"�����"#��

� ��������0����#"�����"�#������

1 1��#��

T T"#�����#�"#��

D D��#��*

����+"#������#���+����"�#"�����"��#��������+"���

�����#�. ��"��"��#��"+�#���"#���"���������729��

����+��#����759�

Manufacturing and Distribution Planning

7–18 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Defining Co-Products and By-Products

;��#�����C06�C2����#�2 ���"�����. ��#���#������C�����#�����.�C�����#������+��52������5)2����"�#�. �����"+"��#��������#�����+�#���������+����C�����#�#��#�"��#"+"���+����������*���������#��������#���#��#�"��#"+"���+����#��������

>�������� �����"+�����"� ��"���#������1���=��� ���.����#�"���!4������#"��#���#�. ����������"+��#��#�!4������#��+��������"��#"+"���+���������*���������#���.� �����+����#��������������#�����#���#"�� ��#"+"��#���.� ������+���=��� ���.��� ���"�����C�����#���*���������#"��������������

-+�����C�����#�����.����������.������#��������������.�#�������������"��#���#�. ����������� ���#��#�����C�����#��1���=��� �����&4������#�C 4������#�� �#"���"�������="#�.�#�����#���#���������

������������������������������

1���#���2����#���#"�����#��������78 �:�9����������C06�C2����#2 ���"�����. ��

$� �����*��"#����06��2����#�2 ���"�����. ������� �#��#���+� ��"��+"� ������� "�*�1"���#�� ���#��#�����06��2����#�#�. �3

� 6����02 ��#

� ��06�'2����#

�� ������������������ "�*��� ��#�

Setting Up the Planning Systems

7–19OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

� �����06�C2����#�2 ���"�����. ��)��""�������� �#��#���+� ��"��+"� ������� "�*��T3

� 2 ���Q

� ��#�Q

� �++��#"���1��

� �++��#"���������#�

����� /&��������

2 ���Q ���������#�����+��������+�������"+"���+��#���.���

�����/��#��������#"����1���=��� ��������������"��#

�������&4Q��+�#��"� �."���#��"#���"����"��"#������

4Q��"#�� ����"��"#���.���������#�����������

����5�#�"� �2 ���"����#������#�"������#����#�

�����#� ��� ���+��������H���C�����#����

.�C�����#����#�������#��������� �����.���+�

�=��� �����#��4Q���4����������+�� #��� ���"��Q�

*�� ,������������� �����+++++++++++++ ++++++++++++++

���������#�����+���� ��+��������"+"�������

Manufacturing and Distribution Planning

7–20 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����� /&��������

��#�Q (������#����#��#�#����"�� �#����#�)� �����������

#���� �� �#��#�����#��+���+��#�������#"���"#������

�����#�����+�#���#�#� ���#��+�#�������#�

��#��#��������#����������� �����.���+���=��� ��

��#��4Q���4���

*�� ,������������� �����+++++++++++++ ++++++++++++++

;���#���� �� �#��#�����#��+�����C�����#�����.�C�����#

�����"#�����.����������+�������#���������������

+��������."��#"����+����������������*��������"

�� �����#��"������#������#�����+�#�����#��+�#��

��C�����#�����.�C�����#�"�� ���#���#��#���� ��#��

�����

Defining Order Policy

�����������"#���"�� �����"��52�05)20�)2��������#�"���#"+��#���� ��+����"������"#"��� ������#�+�������.����0� ��#�#��#���������#���������+��#���#���"#���

���������������������������%������

1���#���-����#���5�#�0�����#"��������78:$$$9��������-#��6����02 ��#�

Setting Up the Planning Systems

7–21OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

$� �����*��"#��-#���6���������� �#��#���+� ��"���+"� ������� "�*�1"��3

� -#���D��.�

�� ���������������������(��"#"��� ���#���-�+���#"���+���#���)�������

� ���(��"#"��� ���#���-�+������� �#��#���+� ��"���+"� ��#��"���#"+��#��"#��������#�C����� ���"#��3

� ����2� "�������

����� /&��������

����2� "������� (������#��#���"���#��#���� ��+��"����#�������"��

"��#���52�05)20�)2��#����A� "���������3

� )�������"�#�7��#�� ������.��52�05)20�)29

$ <�#C+�C �#������@�"��

� 1"=�������@���#"#�

������"������@���#"#��7��E9

: 2�"����+���� �

4 )�#������� ���"#��

����������.�����������������

See Also

� ����������� ������ ���������������������� ������"��#����������������� ��������

Manufacturing and Distribution Planning

7–22 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Verifying Repetitive Routings

(���#"���"��� "#��+�#�������#"�������������#��#�����@�"���#������ �#����������������#"#"�����#"���"�� ���� "��������� �"�+���#"���"��#�������������+�#�����#"������� ���+�����������#"���"��#�����#�" �����

�%������������%���������

1���#�����" ��2�5��"��#�������78 �$$9����������#�0�������)��#"���

$� �����*��"#��)��#"�������#"�������� �#��#���+� ��"���+"� ������� "�*1"��3

� 6����02 ��#

� -#���D��.�

�� ���)��#"����� ��#"���-�@�"���������#�����#"���#��#��������#������ "�*�� ��#�

� ���������������@�������������#��#��������� "�*��� ��#�

Setting Up the Planning Systems

7–23OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

:� �����#��)��#"���-�+���#"������"���#���+� ��"���+"� ��+����������#"����@�����3

� <"��0�� �-���#"+"�

� )������;�"#

� �����"���<���#"��

4� -+�������*���������#����������#"����� "�*��T�

����� /&��������

<"��0�� (����.��#��#���+"����������#"��� "������� ����#�" ��

��*����#������#"�������.����+"����"�"���#��� "����

�� �

)������;�"# (����.��#��#�"��"��#������������+�#��� "��H������

��"#�����������#�������������"#���

�����"���<���#"�� ����#����� ���#"���+�����"���������" �.��������

See Also

� ����������������������������"��#����������&�������� ���������#������������������ �#����#"��

Manufacturing and Distribution Planning

7–24 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Creating Line and Item Relationships

<"��0-#���)� �#"���"��"���#"+"�������"��������#"��� "����������#�"���. ����<"��0-#���)� �#"���"��� ����+"����"+#�������"���"�+���#"���+�#��#� "���

������������������������������

1���#��������1 ���5��������#���#��������78 $:$9��������<"��0-#��)� �#"���"��

$� �����*��"#��<"��0-#���)� �#"���"������� �#��#���+� ��"���+"� ������ "�*�1"��3�

� 6�����2 ��#

� -#���D��.�

�� � "�*�(���

Setting Up the Planning Systems

7–25OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

� ���<"��0-#���)� �#"���"��)��""�������� �#��#���+� ��"���+"� ������ "�*��T3

� <"��0�� �-���#"+"�

� �����"#���������

� ;��(���+�� #�7�0$9

-���#"+��#�����+�� #� "��0�� �.��#��"���$�

� ��+�� #���"+#

� ��+�� #�2�"��

����� /&��������

<"��0�� �-���#"+"� (����.��#��#���+"����������#"��� "������� ����#�" ��

��*����#������#"�������.����+"����"�"���#��� "����

�� �

�����"#��������� (����.��#��#�"��"��#������������+�#��� "��H������

��"#�����������#�������������"#���

;��(���+�� #�7�0$9 (������#��#���#��"�����"���� �#"���"��#����#��

������������+�� #��� ���

Manufacturing and Distribution Planning

7–26 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����� /&��������

��+�� #���"+# (������+"���������7��0�F9�#��#�"���#"+"����" ����*

�"+#��-������ ��#������������������"+#������#�����

�������#�����������#�#��#������ ���#�������#"������

1������ �����#"�����#�3

-+������� ������ ������*����"+#�+����"������"+#��#�

�"++���#"� �"���� "��. �����#��#��#��"+#���������#��

��� ����H���#�������������������#��#����"+#���

#������ ����H���#�����������������#������#����#�

#�����������#���#"�����������������#��#"���

-+������� ���������"��� ����*����"++���#��"+#�����

��#��#����"+#����������������� "��. ��#"������#�

���"���#�����+�� #��� ���

*�� ,������������� �����+++++++++++++ ++++++++++++++

�����#������#�"�+"� ����#�����+�� #��� �����������

��#���#��

��+�� #�2�"�� (������#��#���#��"���#���+�@�������+�#�������� ��

A� "���������3

$ 5��#� �

� ���* �

��" �

: 2����"+#�7+��+�#�����9

*�� ,������������� �����+++++++++++++ ++++++++++++++

�����#������#�"�+"� ����#�����+�� #��� �����������

��#���#��

See Also

� '����������� ��$�����������������"��#���'���*��������� ��������

Verifying Rate Schedules

(��#������� ��"����@��#�#�������������#�"��@���#"#���+�"#�����������"+"����"��"��.�"�+�����"���� ���#���+�#"����)�#������� ��� "�"��#��#��������#����#���� #"� ����*�����+��"#���#��#��������#�#������������#� ������* ������" ��"����� ��@���#"#"���>�������� ������#������� ��"�����#"#"������+��#�"���

������#�����#������� ������3

� ����"+�����"���"���"�+���#"��������������� ��#���������++��#"����#�

� ����"+�������#"���"�+���#"����������#���"#�������@���#"#"�������"��#����#��"�.���

Setting Up the Planning Systems

7–27OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

>��������������"�����#"���#����+"�������+�� #������ ��#���������� ���"��������������� ����>�������� ��������#���"� ����� ����#"�������� ��-�����"#"��������������������"�#���+���.��"��"��#"���#�����"����+�#���+���"��#�������"�����#"����>����������#����+���#���"����������"+�"�+���#"���+����#"������*����#���52�05)20�)2�#"����"����#�������#"������������ "���

�������*"����"#���#������� ���������� ��*����#���+� ��"��3

$������������������ >��������� ���� �#�����#������� ��"+�"#���������.���

�����(�#"����#������� �������#�.���� �#����>�����#

� �����#�#�������� ��

$�������������������� >���������#����� "��#���#������� ��

������������������� >�����#���#"�� �����#�����#���������������������#�

)�#��������"����#�" �5�����)��"���

Before You Begin

� ��#����#�����*����#�����������+��#�"���"����� �#��������'��������!��"��������"��#���'���*��������� ��������+

� ��#������#"���"�#��#"�������������������������������������"��#���'���*��������� ��������+

� ��#���� "��0"#���� �#"���"���������������$��������� ��������������

Manufacturing and Distribution Planning

7–28 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

�%������������������

1���#���)�#��6���������� "��������78 $$49����������#�0�������)�#������� ��

$� �����*��"#��)�#�������� ������� �#��#���+� ��"���+"� ������� "�*1"��3

� 6����02 ��#

� ��������

� -#���D��.�

� <"��0��

� �++��#"���1�����#�

� ������#�

� 1����#�#�

� �����#�#�

�� )��"���#���+� ��"�����+�� #�"�+���#"��3

� 2�"��

� ��"+#

� ��#�����$

� ��#������

� ��#�����

Setting Up the Planning Systems

7–29OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

� E#������ �#��

� E#���������

����� /&��������

2�"�� (������#��#���#��"���#���+�@�������+�#�������� ��

A� "���������3

$ 5��#� �

� ���* �

��" �

: 2����"+#�7+��+�#�����9

��"+# (������+"���������7��0�F9�#��#�"���#"+"����" ����*

�"+#��-������ ��#������������������"+#������#�����

�������#�����������#�#��#������ ���#�������#"������

1������ �����#"�����#�3

-+������� ������ ������*����"+#�+����"������"+#��#�

�"++���#"� �"���� "��. �����#��#��#��"+#���������#��

��� ����H���#�������������������#��#����"+#���

#������ ����H���#�����������������#������#����#�

#�����������#���#"�����������������#��#"���

-+������� ���������"��� ����*����"++���#��"+#�����

��#��#����"+#����������������� "��. ��#"������#�

���"���#�����+�� #��� ���

��#�����$ (������+"���������7��0�$9�#��#�"��"��#��#�������#

#������������+����� �����#�+������*������>������

�"�������*�����#���� �����������������#���#"���

D�#�3���#�"��+������#�"��������"�����#"���#��#

� �������#����#������+�� #��� ���+��#�"�+"� ���-+����

��#������+�� #��� ��������+���+����"�������������#

#�"�����"�����#"����#����#����"� ���#����� ���"��#��

�����"�#��+"� �����������*�����#��#��������#������

�#���� ���"� ���#����� ������#���2�/��#���#���+���

>��������"#��������#������"���#�����+�� #��� ���

D�#�3�(�����"�����#"���+��#����()���#�� �#�������#�

����+�� #��� ���+��#�"�+"� ��������� ���#�����"� ��

��#���#"�� ��"��#�����#��������+"� �����#����()���#�

+�����������������������()��>��������"#��������#��

���"���#�����+�� #��� ���

Manufacturing and Distribution Planning

7–30 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����� /&��������

��#������ (������+"���������7��0��9�#��#�"��"��#��#���#�����

��#������+�����*�����

D�#�3�(�����"�����#"���+������+��� �#�������#���

��+�� #��� ���+��#�"�+"� ��������#�����#��#�����+�� #

�� �����#���#"�� ��"��#��������"�#��+"� �����������*

����#��#��������#�����#����+����������#���2�/��#

��#���+����>��������"#��������#������"���#�����+�� #

�� ���

D�#�3�(�����"�����#"���+��#����()���#�� �#�������#�

����+�� #��� ���+��#�"�+"� ��������� ���#�����"� ��

��#���#"�� ��"��#��������#��+"� �����#����()���#��+��

��������������������()��>��������"#��������#��

���"���#�����+�� #��� ���

��#����� (������+"���������7��0� 9�#��#�"��"��#��#���#�����

��#������+�#�����*�����

D�#�3�(�����"�����#"���+������+���� �������#�

��#������+�� #��� ���+��#�"�+"� ��������#�����#��#��

��+�� #��� �����#���#"�� ��"��#��������"�#��+"� ����

������*�����#��#��������#�����#����+���������

#���2�/��#���#���+����>��������"#��������#������"��

#�����+�� #��� ���

D�#�3�(�����"�����#"���+��#����()���#�� �#�������#�

����+�� #��� �����#�"�+"� ��������� ���#�����"� ��

��#���#"�� ��"��#���)� �������1"=�+"� �����#����()���#�

+�����������������������()��>��������"#��������#��

���"���#�����+�� #��� ���

E#������ �#�� �������.���+���"#�����"##���+���"����#�"���� �

������#����"����"#���#�����#������#����"������"#

�+���������+"����+��#�"�"#���

-��#���5���+��#�"����#���������*������"�����#��

#�"�+"� ������"��"��#������ �#������������@���#"#"��

����@���#"#��#����"���#��"����.��#���#�����������#����

E#��������� �������.���+���"#������ ���"���� ����������*

����2���"�����"����"#���#�����#������#����"���

��"#��+���������+"����+��#�"�"#���

-������+��#�"����#�"������ ��.��#������.���+���"#

�������#����#��

E#������ �#�� �������.���+���"#�����"##���+���"����#�"���� �

������#����"����"#���#�����#������#����"������"#

�+���������+"����+��#�"�"#���

-��#���5���+��#�"����#���������*������"�����#��

#�"�+"� ������"��"��#������ �#������������@���#"#"��

����@���#"#��#����"���#��"����.��#���#�����������#����

Setting Up the Planning Systems

7–31OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����� /&��������

E#��������� �������.���+���"#������ ���"���� ����������*

����2���"�����"����"#���#�����#������#����"���

��"#��+���������+"����+��#�"�"#���

-������+��#�"����#�"������ ��.��#������.���+���"#

�������#����#��

See Also

� ������������'�������������!��"���#�������������'���������"��#���'���*��������� ��������

Manufacturing and Distribution Planning

7–32 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Multifacility Planning

Manufacturing and Distribution Planning

7–34 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

8–1OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Multifacility Planning

-������ #"+��" "#������#"����� �����������#�#����������+��" "#�����#��������+���������#�#������ ��+��" "#���>����#����������"�#�"���� #"+��" "#��� ���#�3

� 5������#����������#��+���#�"� �#�������"#".�#"�����#��*������ #"� �������#"���+��" "#"�

� 1��� "G��#���������+�#��+�"���"#�������������+��" "#"�

� ���#��"�#��� �#��+������#���� �������#����." "#���+���#�"� ����#��"���#�.�#�����+��" "#"�

� �����#��#�#���+��" "#��+�����"�������������"������������"����#���"��#��*�#��+" �#��������������� ��#������ ��� ��#�#��������"#

� ������ �������#"��������"���#���� "#"��#"���+���

� ;�����. �� "����#������ ��#�#��.��"��#������. ���+��������#�������"++���#�� ��#�+��+"�� ����. �

� F��� ��� ����� ���������#�#�������#�#�������+��#�"�����#��*

�)2052���� #"+��" "#��� ���"������"#��+�#���+� ��"���#�*3

� ��##"�������� #"+��" "#��� ���"��

� 8����#"����� #"+��" "#��� ��

� ��*"����"#���� #"+��" "#��� ��

5� #"+��" "#��� ���� ������#�����#� ��+�������#��"���>���������+"��+��" "#��� �#"���"���#����� ��� ��+���#�" �+�������#"��+��" "#����������#��������#��� ���"���+��" ��������"��"�"��� �"#������.���-�����"#"�����������"������#��� �����+��" "#"��"�#����"�� ��� ���

-��5)2��#����#���#��+��"#�����������������+��#�"���� ��#��#�#����������#� ��� �������#���#��+����������#�"#���.�������#"��3

� 2�����������#�#����������� ��#�+��#������ ��� ��#

� �� ������+���#����������� ��#��#�#������ ��� ��#

Manufacturing and Distribution Planning

8–2 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

-��#���+� ��"����=��� ���#����������� ��#�75449����"�����������#�+��#�����"++���#���� ��� ��#������ ��� ��#������ ������+��#���#�������� "���. ��"#���

Branch/Plant M55Item Calendar Demand Line

100 100 100 100

Branch/Plant M56 – 30%Item Calendar Planned

Orders

30 30 30 30

Branch/Plant M80 – 30%Item Calendar Planned

Orders

30 30 30 30 Branch/Plant M95 – 20%Item Calendar Planned

Orders

20 20 20 20

(�.��*������+�#��������#�������"����+����������� ��.����0� ��#"��"��#��#��#�544��#"+"����������#��+�"#��@�"����������+���#���#������ ��.����0� ��#��-��#�"������#����������� ��#�� ����� "��#�����"�"�����������#��+�#�������"#���

����#�����+��� #"+��" "#��� ���"���������" �. �3

������������� 5� #"+��" "#��� ���"���+������ "��#"���� �������#�3

� ���."���� �� ���"�����#"�"#��������������"+"�+��" "#�

� A"���#�#� ��@�"����#�#�������#�������#��*�+�������� ������#����/��#"��

� A"���"��"�"��� �+��" "#"�H����#".�#"���#����� �������������"#������" �." "#�������� �

� �� ��#�����"�����#"���#��#������#��� ���"���+����C���� "��#���.�����

� ���� "��#��� �� ���"����@�"����#��#���� ��#��.����

� ���#��� ���+��������+�����"��"�"��� �+��" "#"����� ���������� �� ���+��#�������#��������

8–3OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

.����������������� 5� #"+��" "#��� ���"���+��.������ �#"���"��� ������

#�3

� ;��#���.����0� ��#�� �#"���"��#���=� ����������#������#������ ����#��*

� 2��"���������+��#�"�����#��+��+��" "#�������+�����������#�"#����"#�"����." ��+���#�"�

� 2"�*�������+��#�������#��#������.��+��" "#���"#���#���#"������"�#�+��" "#��#��+�����

� ����"+���������.���+���� ��+��" "#"��+��������������#

� 2�������+�#����������+���#����������� ��#�#�#������ ��� ��#

Manufacturing and Distribution Planning

8–4 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

8–5OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Setting Up Multifacility Planning

>����#������ #"+��" "#��� ���"���#��#��*���� ����������������������#��+��#�"� �������#���"��"�"��� �+��" "#"���+�������#��"���5� #"+��" "#��� ���"�����"�����+ �=". ����#����+��� ���"������ ���������� ����#"�"#"��

-���� #"+��" "#��� ���"���������#��#������#�. ���+���� ������������� �#"���"������������+��" "#"��������#������#����� �#"���"��#������#��������"�#�"���� #"+��" "#��� ���

��##"�������� #"+��" "#��� ���"������"#��+�#���+� ��"���#�*3

� ��##"��������� �������������� �#"���"�

� )��"��"���.������ �#"���"�

Before You Begin

� A�"+��#��#��)2���52��"��#����

� ;���#����#���������#�����#������".���"�����������������'���������+

� ;���#����#���������#�����#������".���"�����������.���� ������������+

See Also

� '�������������������'���� ��+��"�+���#"����.��#�����#����+"����)2��52����#��#��#�#����#��������"�������"��

Setting Up Supply and Demand Relationships

;��6�����)� �#"���"��)��""���#���#������� �������������� �#"���"�+������ ��� ��+���#�" �#��#������������"�� ��"��3�

� 6����0� ��#

� 2����#�����

� 5�#��� ���"���+��" �

� -��"�"��� �"#������.�

Manufacturing and Distribution Planning

8–6 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

��"���������� �������#����"�#�"����� �������������� �#"���"��"��������#� � ���#"�������������"����#������������.������ �=�+��" "#�� �#"���"���-�����"#"��������������#������� �������������� �#"���"�������������#���+� ��"�����#"��� �+��#��3

,�� � >������������#����#�����#���#"�� ����*����#�����#

�+����"#���������������#����#��+������������#��

������/�#�#�����#�.����+"=��������#��������#����

�%�������������� ��� >������������#��#�#���.�����+�����"���������

���"�������������"����#���"��#��*�#��+" �#��������-+

#����@�"���@���#"#��"���#����" �. ���#����#�������*

�.�@���#�+��" "#"��"��#����@������#��#�������+"���

/������%�������� ;���++��#"�"#����#��#�����#� �#����������#��#���

� ��������������� ��.�������-+�����++��#"�"#����#��#��#

����"�����#������� ��.���������=�"����#����#��

����*�+�����#���+��" "#��

����5)2�6�����)� �#"���"��)��""�������������#����)2052��6����)� �#"���"��)��""������������#�����������"�����#"����>����������#����##"���"��#�������"�����#"���#�����������#��#����"++���#�@�"����#�+������#�"� ��@�"����#�� ���

�������F������������ �#������� �������������� �#"���"���#����#���� �#��#�����#"�������

Setting Up Multifacility Planning

8–7OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

������������������������������

1���#���5� #"C� ��#���#��������78 :: 9��������6�����)� �#"���"�)��""��+

$� �����*��"#��6�����)� �#"���"������� �#�������+�#���+� ��"���+"� �3

� ���� ��6����02 ��#

� �������2 ��#

;��#���A"��������#���"#���+����"��"���#������ ��.����0� ��#�#��"��"���#����������.����0� ��#��(�����"�����#"������#� ���"��.����0� ��#�"�#�����+�� #�

�� ���������������������� �#�������+�#���+� ��"���+"� ������� "�*1"������#�����"#������.��#���"� ���� �.����0� ��#�#��#��"#������ ��������������#�"����#����#��#���� ���"���+��" ��#���"� ���� .����0� ��#�#��#��"#������ �������������#�#��#�.� ����#�������"+"���#��� ���"���+��" ��

� -#���D��.�

� 2 ���"���1��" �

� ������#������������� "�*��� ��#�

Manufacturing and Distribution Planning

8–8 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

:� ���6�����)� �#"���"��)��""�������� �#��#���+� ��"���+"� ���#���� "�*��T3

� �++��#"���1��

� -�� ���0��=� ���

� ������2����#

� 2����#�#��1"

� 2����#�5�*��

� 1"=���5�*��

� ;�"#0��=#�����

4� ���� �#��#���+� ��"�����#"��� �+"� �3

� ���+��<���#"��

� 6�����<���

� 6�����2"�"#�

� (��" �." "#������*

����� /&��������

-�� ���0��=� ��� (������#��#�"��"��#�����#���#����#���"�� �����

�=� ����#���"#��0��#����������"��#���6����

)� �#"���"��5�#��#�. ��71 :� 9�����������#"����

�� #"C� ��#������ ���-+����"#��0��#����������"

�=� ������#����#��#�"#��0��#�����������" �.���������

������+��#�����#�#����������.�����

Setting Up Multifacility Planning

8–9OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����� /&��������

������2����# �����#����������������#����#����#��"������#

�����#�����+�#���� ������������� ��.����� "���.�

#��������.�����

1���=��� �3

�������6�����V�(�<���� ��6�����V���D�����������#����?:�Q���F-�����������#����?�&�Q-+�(�<������$�����#��#����#��������#���������#��#��+��:����#�+�����D�����&���#�+����F-�

(�����������#�����+�$���#��+��#�����#"����� �

+���#��#�.����0� ��#�

2����#����1" (�+"� ��������"����� #"C� ��#�����"���#����#��"��

���#������#��+����������� ��.��+" ���#��� �����

#��+�������������1���=��� �3

� 2����#�#��1" �'�!4Q� �������'����� -+�#������ ��.��������$4��7!4������#��+����9

���������" �. ���#����#���� ���"����#��� ����#���#��+������������

�����#��������#��#���#��+����������������

#��������#�#��+" �"�G���

2����#�5�*�� ���������#���*���"�#��������#��+�#�����#�#��#�#��

�#����������*���������#���"#���"�#��+����+��

����.�����#�����#���

1"=���5�*�� ���������#�#�����#����*����#�����#������#���"#���"

#��+����+�������.�����#�����#���

;�"#0��=#����� ��"��������#��"���"+�#���+"=�����#���*���"�#��.�

������#��#�����"#���#���#����=#��������#��A� "���� ��

��3

; (�����*���#��#�����"#���#

� (�����*���#��#����=#��������#

���+��<���#"�� �������.���+�����#��#�����@�"���#���"��"#���+��

#������ ��.�����#��#����������.��������"� ���#"���"

�#����"��#���6�����)� �#"���"��5�#��#�. ���������

����+���"++���#���#�������������"++���#�"#���

6�����<��� ��#��"���#��� ��� ��#���"�������������#�.����

��� ��.���������"���� #"C� ��#�����"�������

���#� ��� �.������7��"�������"��������"���

����"�� ��� ��9�����������+"#��+� �����.��#��

�"���� ��� �.������7��"�������"������� ���

����"�� ��� ��9�

D���3�("���.����� ��� ����+� ����#��#�#���� ���"��

�#��������#��� ��������.�+���� ���#"������ ��

Manufacturing and Distribution Planning

8–10 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����� /&��������

6�����2"�"#� ��#��"���#����@�������"#�"���� ��� �#��#�#���.�����

����������"���� #"C� ��#��)2052�05)2��;��#�"�+"� �

� �����"#��#���6�����<��� �+"� ��#������*�"����#��

���" �." "#��+"#�"������.����������#�������#���

(��" �." "#������* -��"��#��"+�#���� ���"����#����" �����*����" �." "#���+

#���"#�����+��" ���#�#������ ��.����0� ��#��-+����

���. �����" �." "#������*"������#���"#�����+��" ��.�"��

����������#������" �. ��"����#����#�#���.����0� ��#

�" �.������"##�����#" �#����"���G���.� ������-+����

�"�. �����" �." "#������*"����#���"����#���.� �����"��#��

��� �"���.����0� ��#�����.������#"���

Processing Options for Branch Relationship Revisions

Defaults

Enter the default Branch Relationship display mode.

1. ’D’ = Demand branch ’S’ = ____________ Supply branch

Enter a ’1’ to automatically update the Branch Level field.

2. Branch Level update ____________

E���3�>�����#��#�#�"�����"�����#"���#�������#��#�#��� ��� ��+�#����������#�.�����"����� ��� ��"����#����#���������+��#��������.���������.����� ��� ����#�����+�� #�#�.��� �����"#��#���.������"�"#�����#��"��#����@������"����"���#����#������������ �������������� ��#������#���������#���.�������"#��#����"���#�����"�� �.����� ��� �+"#�

Reviewing Branch Relationships

;��#���6�����)� �#"���"�����#�#����"������ �������������� �#"���"�"��������"�� ���"����"�� �+���#������6�����)� �#"���"�����#��"� ���#��+� ��"��3�

� 6����

� <��� ��+�#���.����

� ���� ��.������+��#����������"����������.����

����5)2�6�����)� �#"���"�����#�����������#����)2052��6����)� �#"���"�����#����������#�����������"�����#"����>�����������#���##"���"��#�������"�����#"���#�����������#��#����"++���#��@�"����#+������#�"� ��@�"����#�� ���

Setting Up Multifacility Planning

8–11OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

���%��'������������������

1���5� #"C2 ��#���#���78 :: 9��������6�����)� �#"���"�����#�

$� �����*��"#��6�����)� �#"���"��F"����������� �#��#���+� ��"��+"� ��#�� ���#��#���.����0� ��#�+����"����������#�#���"� ������ ������������� �#"���"�3

� ����0����6����

�� �����������������#�������"+"�� ��� ��+���#�" ������ �#�������+�#��+� ��"�����#"��� �+"� ������#����� "�*�1"��3

� -#���D��.�

� 2 ���1��" �

����� /&��������

2 ���1��" � ��"�"��������+"���������+����#���:$��#����2:�

�������"���������������"G�� ��"�� �C� �#���"#���

>�������"�� "+��#�����#��� ���"��������.�

������#�#"�������� ��#���#���$�Q��+�#���"����#����� ���

��"�"�"�" ��#���"���#���(6��(�� �"���=���#�#��#����

�������#�"������#��� ����=���#"���#�����C���C+�#

(6��� ��

8���� ���������� ���� ��"�� ����"#����"#���"��

"����#���"���#���#�"��5�#��2 ���"�����=���#��*

����.����"���+��"����#���"#����"#�� "## ��+"����"�

"����#�

Manufacturing and Distribution Planning

8–12 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

8–13OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Generating Multifacility Plans

1���#���2�"��"��5� #"C2 ��#�2 ���"��������78 :� 9��������52�)������#"�����5)2�)������#"���

(+#������������#����#������ �������������� �#"���"�����������.����0� ��#��������������)2052�05)2�)������#"���#�������#����� #"+��" "#��� ����( #���#"�� ���������������)2052�05)2�D�#��������#������#������ #"+��" "#��� ���

��������������#������ #"+��" "#��� ����#����#������ ��#��� ��#��"�+���#"������+����� �� �#"�������������������#"��C������� ���+��� � ��#���"#���

>����������5)2���� � �����"��������#���#������#�*������.������� �#���"���#����#����-��#������ � �����"�����#�����#����#���� ��"#���"�� #����� ���"����� #"� �����������"���#����#�*��� �����������#����=���#����.�#������������������#��#��������#��������������������� � �����"�����#�������"����"��"+"���#���+���������"�����"��

��� "�"#����� ��.��#������.���+�������#��#�������" �. �������������

�����#������#��������#���.�#�����"���#�������� � �����"����-�#�"���"����#����#������������"�����#"���#��#�"��"��#��#������.���+���+"�����������������#������#����������#���=���#��#���.�#�����"���

E���F���+�����������#�����#���+�����+"�����"#����-����+�#��*�����+"�����"#����" ���#�.����#�������# ��"+�������������.�" ������+"������.���. ��"�����"++���#�.����0� ��#�#����#������+"���������#�

Before You Begin

� ��#�����)2052���� #"+��" "#��� ���"��������'����������������������������+

See Also

� ��������������������������������+�����"#"��� �"�+���#"������������ � �����"�����*

Manufacturing and Distribution Planning

8–14 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Processing Options for Multifacility DRP/MPS/MRP (R3483)

Horizon Tab

���������"�����#"������"+����#������#"�����"���#�������������������#"���#���� ���

1. Generation Start Date

;��#�"�����"�����#"���#�����"+��#�����#��#������������#��#�#�#��� ���"�����������"���#��"�� ��#���.��"��"����+�#���� ���"�����"G���

2. Past Due Periods

����������"�� ������� �������������+���#�"����.���+���"����"��#�#���8����#"����#�#���#��

A� "���� �����3

� ����"���7��+�� #9$ $���"��� ����"��

3. Planning Horizon Periods

Number of planning days

;��#�"�����"�����#"���#�����"+��#������.���+�����#��.��"�� �����"��#��� ����1���=��� �������������"���#���#"����"������������" ����#��+��#�����.���+�� ���"��������#�������* ����#��+��#������.���+�� ���"������*�#�������#� ����#��+��#������.���+�� ���"������#��

Number of planning weeks

;��#�"�����"�����#"���#�����"+��#������.���+����*�#��.��"�� �����"��#��� ����1���=��� �������������"���#���#"����"������������" ����#��+��#�����.���+�� ���"��������#�������* ����#��+��#������.���+�� ���"������*�#�������#� ����#��+��#������.���+�� ���"������#��

Generating Multifacility Plans

8–15OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Number of planning months

;��#�"�����"�����#"���#�����"+��#������.���+����#��#��.��"�� �����"�#���� ����1���=��� �������������"���#���#"����"������������" ����#��+�#������.���+�� ���"��������#�������* ����#��+��#������.���+�� ���"�����*��#�������#� ����#��+��#������.���+�� ���"������#��

Parameters Tab

;��#��������"�����#"���#����+"�������"����"#�"���2 ������#��#��+� ��"����.��#��������"����+������#"���#����

8����#"��������$�?�"�� �C ��� �52�0�)2����"������#"���#��������.������"#���"�����"#".�#"������"�����#�+������������#��"#��������#0��������#�� �#"���"�����"��������+��#�"������"�����#��"#�����#0��������#�� �#"���"��

� �������������������#"����"��+�������"#������"+"���"��#�����#�� ��#"����"#����2 ���"���������+�$����#���2 ��#�5���+��#�"�����#�+�������#���#���"#���"�����+��#��������������

� 1������+��#����"#��������������"��=� ����������#��#����������#��;�������#"���#����$�"+��������#�#��������� ��#����#������� �������"#���+"#��������������#�." "G��#�������� �.�+���� ��"�������������#�����������#�

� D������"��������������#���

8����#"�������� �?��� #"C ��� �52�����"������#"���#����"����� #���#"���#������#"���#����$�������+��������� �#��#��C#�C.�##�������"����+���#������ ���"#���������������=� �����������+��� �����#�"#����������"+�"��#�����#��� ��#"��������#��#�����������#��>�����#����"+��� �"#���#��.��������"��#�����#��� ��#"������#�/�#�#�������#�"#��������������� ����#������"��������

8����#"��������:�?�5)2��"#�����"#���#�52�����"������#"���#�������#������+���#"��� "#���������#"���#���� ��-+��������������������� �#������#"�������#�." "G���������#������� ����������� "�"#���#��� ��#"���#�5)2�"#���7�"#��2 ���"���������+����� 9��#���.������"�������"���#"�����"�"���". ��.�������������+���#�����#������� ���"#���"�#" �#���"��#���52�05)20�)2�<����<��� �)�@�"����#�72���"��9�#�. ��

8����#"��������4�?�5)2��"#��+�G���52�����"������#"���#����+��G��#����#������� ���+#��"#����.����#�." "G����6�+������"���#�"������#"���#����������� ����*��� ����������/�#���#�#����#������� ���"#������� ��������#�������#�������������"������#"���#����+��G��#�����#"�� ���"�����"G���"�" ��#��#�������#���+��G��+�����+��G������#��+�#��

Manufacturing and Distribution Planning

8–16 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

��"G����)���"���#�"������#"���#�������#���+� ��"����� #���"������ ��#�52��"#����� �3

� D�����������" �.��� ������

� D��������+���="#"��������" �.�����#���

� ����(�/�#������"���(��" �. ��@���#"#��"�� �����#���������#"���

� �������"��� ���=� ����������#����������#�+����="#"�����*����������"����C2����������+�������#�"#������ ��C1���������

1. Generation Mode

(����������#"���"�� ���������"#������"+"���"��#�����#��� ��#"����(���#�������"�� ������ ��#����"#���"��#�����#��� ��#"���#��#��������������"���#��� �#�#"����������#���������

A� "���� �����3

$ ��#�������� ���������#"��

2. Generation Type

2 �������#����� ��+��#���2����#��#�.�+����#�" ���"�+���#"���

A� "���� �����3

$ "�� �C ��� �52�0�)2 �� #"C ��� �52�: 5)2��"#�����"#���#�52�4 5)2��"#��+�G���52�

3. UDC Type

;��#�"�����"�����#"���#�����"+��#���;���#�. ��7�#��� :9�#��#����#�"�#��� "#��+�@���#"#��#����#��.���� �� �#��������"##���#��#����"�����"��#�. �71 :$ 9����+�� #�?�E��

4. Version of Supply/Demand Inclusion Rules

;��#�"�����"�����#"���#����+"�����"�����"����+���� �0�������"�� �"��� ��#�������������������� ����+"���#����"#�"������#��� ��#�����+�����"���

On-Hand Data Tab

���������"�����#"�����+"�������#����������� �� �#����C�����"����#���

Generating Multifacility Plans

8–17OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

1. Include Lot Expiration Dates

;��#�"�����"�����#"���#�����"+�����#���#����#������"��� �#�=�"�#"�����#��������� �� �#"�����C�����"����#����1���=��� ���"+���������������C������"#������=�"�#"�����#���+�(���#� $�����4������������������������#��.��$�����4��#���������������#������"G��#����=�"��� �#��������#���������#������������+��#��������+�#���"#���#���#"+���������

A� "���� �����3

. ��* �����#����"��� �#��=�"�#"�����#��������� �� �#"�����C�����"����#��$ ���"��� �#��=�"�#"�����#��������� �� �#"�����C�����"����#��

2. Safety Stock Decrease

;��#�"�����"�����#"���#�����"+�����#���#��� ���.���������.��"��"�����" �. ��@���#"#��+�����"���#����+�#��#��*�@���#"#�����.�����.#��#���

A� "���� �����3

. ��* �����#�������$ ������

3. Receipt Routing Quantities

Quantity in Transit

-��������+��#�"������"�����#�����#"���"#�"��������#���#�. "������#��*�"��"������#����#��"������#�������#�"#�"����" �. ��+��"����"�#�������#��$�"+��������#�@���#"#"��"��#��"#�#��.��"�� �����"��#���6��"��"��(��" �. ���� �� �#"������#���#"����"����#���"���#���������"�� ����#���@���#"#"��"��#���-��)���"�#�7O-)9� "����+�#���#"����"�������@���#"#"�����#" ���"��������" �. ��.��#�"�������������"++������"��� ��"�����������"��#���@���#"#"��"��#���#"����"��

A� "���� �����3

. ��* �����#�"�� ����"����C�����"����#��$ "�� ����"����C�����"����#��

Quantity in Inspection

-��������+��#�"������"�����#�����#"���"#�"��������#���#�. "������#��*�"��"������#����#��"������#�������#�"#�"����" �. ��+��"����"�#�������#��$�"+��������#�@���#"#"��"��"����#"���#��.��"�� �����"��#���6��"��"��(��" �. ���� �� �#"�����#���"���#���������"�� ����#����@���#"#"��"��#���-�)���"�#�7O-)9� "����+�#���#"����"�������@���#"#"�����#" ����"��������" �. �.��#�"�������������"++������"��� ��"�����������"���#���@���#"#"��"��#��#"����"��

Manufacturing and Distribution Planning

8–18 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

A� "���� �����3

. ��* �����#�"�� ����"����C�����"����#��$ "�� ����"����C�����"����#��

User Defined Quantity 1

-��������+��#�"������"�����#�����#"���"#�"��������#���#�. "������#��*�"��"������#����#��"������#�������#�"#�"����" �. ��+��"����"�#�������#��$�"+��������#�#���������+"����@���#"#"��7��+"�������)���"�#�)��#"��)��""���"��#���;���#������#"���$�+"� �9�#��.��"�� �����"��#���6��"��"��(��" �. ���� �� �#"�����#���"���#���������"�� ����#����@���#"#"��"��#���-�)���"�#�7O-)9� "����+�#���#"����"�������@���#"#"�����#" ����"��������" �. �.��#�"�������������"++������"��� ��"�����������"���#���@���#"#"��"��#��#"����"��

A� "���� �����3

. ��* �����#�"�� ����"����C�����"����#��$ "�� ����"����C�����"����#��

User Defined Quantity 2

-��������+��#�"������"�����#�����#"���"#�"��������#���#�. "������#��*�"��"������#����#��"������#�������#�"#�"����" �. ��+��"����"�#�������#��$�"+��������#�#���������+"����@���#"#"��7��+"�������)���"�#�)��#"��)��""���"��#���;���#������#"�����+"� �9�#��.��"�� �����"��#���6��"��"��(��" �. ���� �� �#"�����#���"���#���������"�� ����#����@���#"#"��"��#���-�)���"�#�7O-)9� "����+�#���#"����"�������@���#"#"�����#" ����"��������" �. �.��#�"�������������"++������"��� ��"�����������"���#���@���#"#"��"��#��#"����"��

A� "���� �����3

. ��* �����#�"�� ����"����C�����"����#��$ "�� ����"����C�����"����#��

4. Lot Hold Codes (up to 5)

;��#�"�����"�����#"���#�����"+��#��� �#�#��.��"�� �����"��#����� �� �#"���+���C�����"����#����>���������#������="�����+�4� �#��� �������7:$0<9�

. ��* "�� ��������� �� �#�"���� �� �#"����+���C�����"����#��P "�� ����� ��� �� �#�"���� �� �#"����+���C�����"����#��

Generating Multifacility Plans

8–19OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Forecasting Tab

���������"�����#"�������#��������3

� �����#��"������#�+����#�#����#���������������������

� ���"�"#"�#�����"� � ��"��+��+����#�������#"��

1. Forecast Types Used (up to 5)

1����#������������+���������>����������#��+����#��"���$���"++���#+����#�#����7 :0�19��"#�"��#���1����#"����#��������"����"�����#���6�#1"#�7619�#������������#�����"#��H��"#����+���������;��#�"�����"����#"���#����+"�����"���+����#�@���#"#"�����#���.����"���+����#�#������"�� �����"��#���� ���"�����������#���� #"� ���� ����"#�����������+��=��� �3��$��61�

2. Forecast Consumption Logic

-+��������+����#�������#"��������� ����������"��#���������"�����#��+����#�"�"�� ���������#��+�#���+����#�+��#��#���"����-#�"���#�������"#"��� ������+��������

������+����#�������#"�������"#��H�2 ���"���1�����)� ����#�.��F�����#��2 ���"���1�������#�.��%%%��������� �������#����#���2 ��#�5���+��#�"����#��+���

A� "���� �����3

. ��* �����#����+����#�������#"��$ ���+����#�������#"��

3. Interplant Demand Consumes Forecast

������"���+����#�������#"�������#�"�����"�����#"���#�����"+����#���#�����"�#�� ��#��������#���������+����#��������"��������#��� ���"���� ��������������#�"���#"���#�����"+�����#���#�����"���"�#�� ��#�����������#�����������������#�����#"���"��#��#����#������"��"�#�� ��#��������+��+"������� ������#��+������

�����#�����#"���"�. ��*��#����#���"�����"�#�C� ��#��������.��+����#������#"������ ���"���� ���������"���"�#�� ��#����������������#�������+���������A� "���� �����3

6 ��* �����#����"���"�#�� ��#������������#�����������$ ���"���"�#�� ��#������������#�����������

Manufacturing and Distribution Planning

8–20 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Document Types Tab

���������"�����#"����#�. "����+�� #��������#�#����

1. Purchase Orders

������������"���������� �#���#����������������#"����#�"��������##�����" ���������#�����+�� #��������+�� #��� ���"��2�

2. Work Orders

������������"���������� �#���#����*��������#"����#�"��������#�#����" ���������#�����+�� #��������+�� #��� ���"����

3. Rate Schedules

������������"���������� �#���#���#������� �����#"����#�"��������##�����" ���������#�����+�� #��������+�� #��� ���"�(��

Leadtimes Tab

;���+�#�� ���#"���#��� ����=#��#"���+���� ���"�����"�#��������#"����;�����������#��+" #����#������#���������

1. Purchased Item Safety Leadtime

1��"#����"#��#��*"���#����2��#�������������#����� ���������#������#�#���"#��H� ��� � ���#"���#���� �� �#��#���#�#� � ���#"���

2. Manufactured Item Safety Leadtime

1��"#����"#��#��*"���#����5��#�������������#����� ���������#������#�#���"#��H� ��� � ���#"���#���� �� �#��#���#�#� � ���#"���

3. Expedite Damper Days

�=���"#�������������������#�#"������#��������#"���#�#���#��������#"��"���+��#������.���+�����������#������

4. Defer Damper Days

��+�������������������#�#"������#��������#"���#�#���#��������#"��"���+��#������.���+�����������#������

Generating Multifacility Plans

8–21OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Performance Tab

���������"�����#"�����+"�����#��#������"�������������������"��#"���

1. Clear F3411/F3412/F3413 Tables

;��#�"�����"�����#"����"#���=#�������#"��I�-+�������#��$��� ������"�#���52�05)20�)2�5�����#�. ��71 :$$9��52�05)20�)2�<����<��� )�@�"����#�72���"��9�#�. ��71 :$�9������52�05)20�)2��������7�"����"�9�71 :$ 9�#�. �����������

(����#��#�"���������� ��.�� "�"#����-+��� #"� ��������#�"�������������# ���"#��#�"�����"�����#"����#�#��$��������� ��*������ #���������#����� �#������"���

A� "���� �����3

. ��* �����#�� ���#�. �$ � ���#�. �

2. Initialize MPS/MRP Print Code

-+�������#��$�"��#�"�����"�����#"����#���������"�"#"� "G������������"�#���-#���6�����#�. ��71:$��9�.���##"���#���-#����"� ��������75)2�9�#�. ��*�

-+����� �����#�"�+"� ��. ��*������"���#"���"���������������#����" ���#� ���#��������"��#���-#���6�����#�. ��71:$��9�

)���� ���+����������#�#�"�����"�����#"����+�������"#���"��#�����#�� ��#"���#���5)2��+"� ��"�����#�����+� ��3

� $�"+�������������#����#��

� ��"+��������������#��

����2"�#�5�#��2����#"��������� ��������7) :4�9�� �������#����#����#�� ��#"���.�������#���5)2��+"� ��

A� "���� �����3

. ��* �����#�"�"#"� "G��#���-#���6�����+" ��$ -�"#"� "G��#���-#���6�����+" ��

3. Messages and Time Series for Phantom Items

;��#�"�����"�����#"���#�����"+�����#���#��������������#�����������#"����"��+������#���"#���

Manufacturing and Distribution Planning

8–22 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

A� "���� �����3

. ��* �����#������#�$ �����#�

4. Ending Work Order Status

;��#�"�����"�����#"���#�����"+��#�����*�����#�#���#���"�������������� ������=� �����#����������#��-+����� �����#�"�+"� ��. ��*��� ����������=� �����#����������#�

5. Extend Rate Based Adjustments

;��#�"�����"�����#"���#�����"+�����#�����/�#���#�+���#��.����"#������=� �����#����������#��#���.�����#"���������+��#�����������#�

A� "���� �����3

. ��* �����#��=#���$ �=#���

6. Closed Rate Status

;��#�"�����"�����#"���#�����"+��#���#�#���+�� �����#������������� ��+�����#�C.����"#����#����#���������#�������#������#��#�����#��� ���C�#��#�#�������"����#�#��

Process Mfg Tab

-+�����������������+��#�"������#��$�#�������#��#���� ���.�������#��+����#��+�#�����C0.�C�����#�+��#�������������������#�������#�������+��#��������

1. Process Planning

-+�����������������+��#�"������#��$�#�������#��#���� ���.�������#��+����#��+�#�����C0.�C�����#�+��#�������������������#�������#�������+��#��������

A� "���� �����3

. ��* �"��#�$ ����

Multifacility Tab

���������"�����#"�����+"����"#�"��"������ #"C+��" "#�����"�����#�

Generating Multifacility Plans

8–23OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

1. Process Each Branch

-+��������� "��#"�����#����"���7.������ �#"���"�9�����#�"�����"����#"���#������������.�����+���#���6�����)� �#"���"��#�. ���#������ ��� #��#�.�������������"���#"���"����������"���#"���

A� "���� �����3

. ��* �����#�����������.����$ ����������.����

2. Date Branch

��#��#�����+�� #�.����0� ��#�+�����"���#���#"����#�������+ ����� ������-+���� �����#�"�+"� ��. ��*��#����� �����+�������.����0� ��#�"������������"���#"���"������

3. Consolidation Method

����"�� ������ "��#"�����#����7$9�����#������ �������������+������.�������� �� �#��������#"����"�������� ����#����� #�"��#������� "��#��.��������"+"���"��#������� "��#"���6���������"�����#"���

����.������ �#"���"����#����7�9����#���6�����)� �#"���"��#�. �����"�"#�����+�� #�

A� "���� �����3

$ "�� ������ "��#"��� .������ �#"���"��7��+�� #9

4. Run Regular Planning

-+��������� "��#"�����#����"�$�7"�� ������ "��#"��9����#��$�#����+���#�������#"������#���.����0� ��#�#��#����.�"������� "��#����#����"���#����#�����#���#���-+����� �����#�"�+"� ��. ��*��#�������������="#"���#"���"����#��

A� "���� �����3

. ��* �����#�"�� ����.����0� ��#�.�"������� "��#��$ "�� ����.����0� ��#�.�"������� "��#��

5. Consolidation Branch

-+��������� "��#"�����#����"�$�7"�� ������ "��#"��9����#��#���.����0� ��##�����#�"��#������� "��#����� #��-+�#������� "��#���.����0� ��#�� ����#�"��"#�����#"����"����#���#��#���#��"�"�� �����"��#���#�#� �

Manufacturing and Distribution Planning

8–24 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

6. Category Code

-+��������� "��#"�����#����"���7.������ �#"���"�9����#��#�����#����������+�#�����#�#��#�"���� "���.������.����0� ��#�#�����#������������+"�������+"������#����������#�. ��

A� "���� �����3

$ :$02$� :$02� :$02 : :$02:4 :$024

7. Manufacture at Origin

��#��$�"+�#�����������+��#����������������"#���"��#���������#����������.�#������� �����#�#���.#�"��#�����������"#���+������#��.����0� ��#�����+������������������#���+����������"#���������*�����������������#���+������+��#����"#���

A� "���� �����3

. ��* ���#��#��+������+������+��#����������������"#��$ ���#��#��+�������� ��+����������"#��

8. Transfer Order Document Type

������������"���������� �#���#��#��+���������#"����#�"��������##�����" ���������#�����+�� #��������+�� #��� ���"����

Parallel Tab

���������"�����#"������"+��#������.���+�������#��#�#����#�������"������ � �����"�����������#"���� �����"+�����#���#����#�����������"�����"������ � �����"���

1. Number of Processors

;��#�"�����"�����#"���#�����"+��#������.���+��.�#���"��������������+�� #�"���7G��9�

2. Pre Processing

;��#�"�����"�����#"���#�����"+�����#���#����#������������"����"������ � �����"������"���������"����#����#�������*���� ����������������� ����� ��#���"#����"#�"����� ��������������2�����"��"��������+�������������������5)2�����"��� "���� �������#������.�

Generating Multifacility Plans

8–25OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

�+�"#�����#�� ��� ������"� ��#����#���#�#� ����.���+�"#���"��#�����#�� ��#"����A� "���� �����3

6 ��* �����#���������#����������"���$ �����#������������"���

Manufacturing and Distribution Planning

8–26 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

8–27OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Working with Multifacility Planning Output

5� #"+��" "#��� ���"�����#��#����"#��+�"�+���#"���"��#���#"����"�����#��+�������������;��#���#"����"��"�+���#"���#���"#��������#�����"���#���� ���"���#��#�#����#�������#��>������ ����"���#���#��+�����������+��"��"�"��� �"#������.��#����#��"�����"�����#"����"+�����#��#����������#��#�*��

��*"����"#���� #"+��" "#��� ���"�����#��#����"#��+�#���+� ��"���#�*3

� )��"��"���#���#"����"��+��#����� #"+��" "#������� �

� 2���"���#��+������������+��#����� #"+��" "#������� �

Reviewing the Time Series for the Multifacility Schedule

;���"�����"��-�@�"��#����"���#���#"����"��+��#����� #"+��" "#������� �������� #"+��" "#������� ��"���������+�#"��C��������� �������������+�� ��#���"#������"���#��"���"����+���#�����#�����#�������#"�������#�����������2���"�����#"���"��#����)2052��������#"������������. �����#���#������" ������* ��������#� ��#"�����"���7.��*�#9�

-���� #"+��" "#��� ���"����#����#������#���+� ��"���@���#"#��#����"��#��#"����"�3

@�9- )�����#�#���������������� ��"����#�����+�����"#���

��"�@���#"#��#�������������#����������.����H�#"����"��

G�$ -�#�� ��#�����������"�@���#"#��#����"��"��#��#�����#�������

#��#�#����#���#��+��#��#������ ��.����0� ��#�+���

�������.����0� ��#�

Manufacturing and Distribution Planning

8–28 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

���%��'��������������������������

1���#���5� #"C1��" "#��2 ���"�����" ������#"��������78 :$:9���������"����"�0(�2�-�@�"��

�����*��"#���"�����"������� �#��#���+� ��"���+"� ������� "�*�1"��#�� ���#��#���#"����"��+�����"#��3�

� 6����02 ��#

� -#���D��.�

See Also

� �����#������2� �'�����

Processing Transfer Order Messages for the Multifacility Schedule

;����#�" �5�����)��"���#����"���#���#��+������������+��#���� #"+��" "#������� ���5� #"+��" "#������� "������#��������#��#��������"�#��#��#����������������� ��+��" "#"���-+����������#���������#����#�����#���#"�� �����#��#��+�������>�������#��+��"#���.�#����+��" "#"���"#����#���#����#�����*����

Working with Multifacility Planning Output

8–29OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

�����������������������������������������

1���#���5� #"C1��" "#��2 ���"�����" ������#"��������78 :$:9����������#�" 5�����)��"���

$� �����*��"#����#�" �5���������� �#��#���+� ��"���+"� ������� "�*1"���#�� ���#��#���#��+������������+�����"#��3�

� �������6����

� -#���D��.�

�� ������#���#��+������������#��#��������#�#�������

� 1���#���)���������������2����5�����#�����#��#���+� ��"��3

� ���+������+��#���"#��

� 2�������������.��+��#����������� ��#

� �� ���������.��+��#������ ��� ��#

:� )��"���#���"�+���#"���+��#�����������"��#���+� ��"���+"� �3

� )�@��#���#�

� )����H������ �#�

� )����H���#�#���#�

� �#�#���#�

� ����D��.�

� �������6����

� ���� ��6����

Manufacturing and Distribution Planning

8–30 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Multifacility Forecast Consumption

5� #"+��" "#��+����#�������#"���"��5�#�"� �)�@�"����#�2 ���"���75)29�"�������#��������#���+����#�@���#"#��#������#������.���+�� ����������"����������������� ��+�+����#�������#"���"�#�����������+����#@���#"#��.�����#��#����#���#�#� ��+�� �����������"�������������+����#�@���#"#��"����������"#���+� ������#"� ���1���=��� ��������#��� ������@���#"#��"����#��#����#���+����#�@���#"#���#����#���+����#@���#"#��"�+� ����������

Time Series Quantity Types

�����#������#���+� ��"���@���#"#��#����7 :0E�9�+���� #"+��" "#�������#"��3

G��$7 1"��"�#�� ��#�7����/�#��9����"�@���#"#��#���������#

����+��#��+��� ��#��#�#����#��������#�����"

@���#"#��������#����� ���"���������#��"������

���������=���"#�������+��#�������

G��$ 1"��"�#�� ��#�����������"�@���#"#��#���������#

����+��#��+��� ��#��#�#����#��������#�����"

@���#"#������ ���"���������#��"��������������

�=���"#�������+��#�������

G �7 ��#� �"���������#��������7����/�#��9����"�@���#"#�

#���������#�#���#�#� �@���#"#��#��#�#����#������#�

�������+����#�������������+����#�������#"���

������������������#�����������#��+����#

@���#"#���+���=��� ��#���8���#������ ���"���� ���'�-;

"�#���@���#"#��#��#�#����#����������#�����������

��"�@���#"#���"��#����"��#���#�"�� ����"�#�� ��#

�������7'-������'1-�9��-�#�� ��#�����������������

#���-�#�� ��#������������"�����#"���+��#���5�#�

2 ���"��������� ��������7) :� 9�

G � ��#� �"���������#�����������"�@���#"#��#���������#

#���@���#"#��+����#������������+#��#����#�����

+����#�������#"��� ��"��

G�$ -�#�� ��#�����������"�@���#"#��#���������#�#��

@���#"#���+��������#��#�#����#��������#��#������#

���#���+��" "#�H��@�"����#�

Working with Multifacility Planning Output

8–31OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Calculations

-+�#���-�#�� ��#������������"�����#"���+��#���5�#��2 ���"��������� ��C5� #"� ��2 ��#�������7) :� 9�"�����#���#��+�������������#������ �� ��#H�+����#�������#���������#�� ���#���#��+���������"��������#�����#���+� ��"����� �� �#"��������#���-�#�� ��#������������"�����#"��"���3

� C�-;�?�7C��;9�O�7C-�9�O�7C1-�9

� O2<��?�7C1���9�O�7C�-9

-+�#���-�#�� ��#������������"�����#"���"��++��#����#���������#��#��+�����������"#"��� ��������+��#������ ��� ��#�������#������#��+� ��"����� �� �#"��������#���-�#�� ��#������������"�����#"���"��++3

� 7�-;9�?�7C��;9

� O2<��?�7C1���9�O�7C1-�9�O�7C�-9�O�7C-�9

Additional Options for Multifacility Forecast Consumption

��������"�#�� ��#���������������+����#�����������#����������#��+�����#����#��;���#�. ��:�0�1�������#���#���������� �#���"�C���+"���#��+������#�������� �#��"��#���C�F-2�@���#"#��#�������" ��#" ��"���#������#���������+����#��( ������� ���+�#���-�#�� ��#�����������"�����#"����#����#���������"�#�� ��#�����������"#��# �����#��#�������"�� ���������������+"����������1���=��� ���"�#�� ��#��������"#������������������#��������+����#�

-+����������#����#�#�����#�������@���#"#��#���������������*����������+�#�� :0E��#�. ���"#��#����������@���#"#��#����������#������� �#��#���#���� �� �#"����.�#�������#��"� ���#�������#���#"����"��������#����"� ��#���+� ��"����� #����������������#���+� ��"���@���#"#��#���3

G��$7 �����#���������#��"#��#�������#��#���#"����"��

G��$ �����#�������#�������#��#���'-��@���#"#��#����

G �7 �����#���������#��"#��#�������#��#���#"����"��

G � �����#����"#��#�������#��#���'���@���#"#��

Manufacturing and Distribution Planning

8–32 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Supplier Scheduling

Manufacturing and Distribution Planning

8–34 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

9–1OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Supplier Scheduling

��##"��������� "������� �����"���������� "���"#�����"#��#��"��"��"�+���#"�������������������������+" ��#������#�������� ��+�/�#C"�C#"�������#"��������� "�����;"������ "������� �����. ������#�������#�����)2052�05)2�� ���"�#������ "#"���"��"�������� ��

���� "������� "������"#��+�#���+� ��"���#�*3

� ��+"�"������ "�����#��#

� 8����#"������ "������� �

� )��""������ "������� �

� )� ��"������ "������� �

� 2"�#"������ "������� ��7��#"��� 9

������� "������� ��"���#"+"��.�#����#C����� ���C#��������+���������"#����#�����+��" "#���>���.������"�#�"��#"�� ��"�+���#"���#�����"#����#��#�#������"�#���������#���� ����������������������� "�����#�������������� "������� ��#��� ���#��"������#"��������"��"������� ��

>����#����������"�#�"����� "������� ��#�3

� �����#�"#��C���"+"��� �#"���"��+������� ����"����#��#�#����� "�H�"#�

� ��#����. ��*�#������������������#�"� ��"��"�����������#��"#��������� "�

� 8����#�����"��"�������� ��+��� ���� "�C����� �����������"#�"������ ������"G��

� 8����#���� #"� ����� "������� ��+����"�� ��"#��

� (�/�#�#����"��"�������� ��+����� ����������#��������#��. ��*�#����� ���

Manufacturing and Distribution Planning

9–2 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

>����������#��������������2�������#��#���#��� �������������. ��*�#�����"#��������� "��

"���������� �������# (�. ��*�#�����"���#���"��������������#��#����

"���#������� "��+���� ����@���#"#���+�������"#����

���"+"���� "������#�������������+������ "������ "�

"#���.��"��"��#��������������2�������#��#��

�"#��#������#"����+���. ��*�#������>�����#����#���

. ��*�#�����+�������"#���#��#��������#�#������� �

+����� "���� "�����;����#��6 ��*�#�����"��#��

2�������#��#���#����#��. ��*�#�����+���"#���

>���������"���� �. ��*�#�����+����"�� ��"#�������

�����#��������� "������� ������� "��� ���

����� "���� �������#���#������ #"� ��. ��*�#����

+��#���������� "��������#��������#����"@���"�" �

#���++��#"�"#����#��#����#��"���#�����#"�����������

�#������#���. ��*�#�������#����#���#�#���#�����

#����@��#�����#����#���������#��

"��������� �������

�������# >��������. ��*�#������ ����+����� "��#������

������"��"�� ��� ��������+���� "�����+������.�#

��#�� ���+�#�������������������������1���=��� ��

�����"��#�"�����. ��*�#������ ����+��$&�����"#��

+�������� "���-�����"#"���������"��#��������

�������#�#��#�*���� "�����+����#����������"#��+�#��

"#�����������#����#" �#�������"�+" ���������#��

���� "�������� "���������������#������

����#"����#����#��������#��������������

���"�#�#���. ��*�#������)���"�#�+��#��������#��

����������#���#�#� �@���#"#��#��#����"����������#��

. ��*�#�����

"������������������%�

�����#

�����++��#"�����#�������+����. ��*�#�����"����"+"��

.��#���.��"��"���������#����#������#����=�"�#"��

�@��#������#���

����+� ��"����=��� ����# "���#���#���#��#�����+� ���#�����#������� "�

����� �3�

1A .��� ��-����/����

��#���������+�����"+"���"#���+�������#"�� ����� "��+�������"+"���#������������������������"��(�����"��#���������� ���������

4A $�������������������

��+"���#�����#�" ��+��������#��#��"#��#������ "�����#�����#�0���������� "��-�+���#"���+��������&�������'�����������������

9–3OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

5A $��������������������

��+"�����"������������ "��#�����"������"����#����&�������'��� �����������+

0A *��$*�3,��3,*�

)����)2052�05)2�#��� �������@���#"#"��"��#����+�#"�������@���#"#�������������������������.���� ����������

;A *�%��',�����������,*�

)��"�����=���"#�����+���������� ������+�#���5)2������+���!��"���#����������������

6 ���������������������-�������

��+"����������� "#������#����.�#�������� "��.��"#�������&�������'�������'����������������

8A !���������������������

8����#������+#��+�������� "������� ���"��#������"##"���#����+"�� ����� �����������������'�������'���������

<A *�%��'���*�%�����������������

;���#���#��C����� ���@���#"#"��#���������#��+�� �#C�"��#��������#��#�������� ���������������'�������'���������

=A ���%����*��������������������

)� ����@���#"#"��+���#���. ��*�#������������#�������������+�� �@���#"#"���"#�"��#���� ���. ��#"���+������������������'�������'��������+

12A ��������������������-�������

2"�#������#����"���#����"����#������ ������#���� ���. �@���#"#"���������������'�������'��������

Manufacturing and Distribution Planning

9–4 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����+� ��"�������"��" �#�#������#����#������. ��*�#��������� ���3

Purchase OrderQuantity 2,000

Blanket Order

Open Quantity 16,000

Blanket OrderRelease

Open Quantity 16,000Shipment Pattern Weekly

Supplier

16,000

9–5OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Defining Supplier Contracts

>�����#���#��#���#����+��������#��#��"#��������+�������� "�������#������#�������#��#�#���#�������#��������"�#�"����� "������� ���

-�����"#"����"+��������#�#�������#���� #"� ����� "������� ��+����"�� �"#����������#���+"����������� "#������#����.�#�����#������ "��.�"#���

���� �#��#���+� ��"���#�*3

� ��+"������ "�����#��#�"�+���#"��

� ��+"����"����#���##��

� ��+"������ "��� "#������#���

Defining Supplier Contract Information

�����������+"�������� "�����#��#����������� ����+"���#"���+�������"������ ���+��+��G"����� "����@���#"#"���� ���. ������� �����������+�#���@�"����#�

��������������#��������� ���#����#��3

� ��#�. ��*�#������ ����#��#������##���"���"�#�������"�#��#"����"���

� (����� �#����#�����@���#"#"������@���#"#"��#��#��������"�����"��#�#����@��#�����#��

� �=������#����������#�����"#"������.��"��#���2�#�����+"� ��

� �=������ �����"�#������#�"��#����� ��)���"�#�+"� ����������#�������#�#��#������� �#"������"����@���#"#��

���������������#��#�������� ���#����#����"� ���#���@���#"#"��"��#��2�#����������� ��)���"�#�+"� �������#�0����������� "��-�+���#"�������������� �#����� "��"�+���#"����#����#����� �#��#�����#"��������"�� ��"��#����"#���

Manufacturing and Distribution Planning

9–6 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Before You Begin

� ���#����. ��*�#�����+�������"#���#��#��������#�#������� ��#�������� "������� "��������������������"��(�����"��#���������� ��������+

��������������������������������

1���#����)2���5)2���" ������#"��������78 :$$���8 :$ 9���������#�0����������� "��-�+���#"���

$� �����*��"#��A����������� ��5�#������� �#��#���+� ��"���+"� ������ "�*�1"���#����������� ��"�+���#"���+������� "������#���. ��*�#����3

� ����D��.�

� <"���D��.�

� �����������

� ��������

�� � "�*�(���

Defining Supplier Contracts

9–7OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

� ���A����������� ��5�#��)��""�������� �#��#���+� ��"���+"� �3�

� A����������� ���0�05

� )� ���. �����

-���#"+��#�����"����+�#"���+���#��������#"���#�#���#��#��#������������" �.�����#���+��. ��*�#������(���@���#"#"�#��#��������� �����#"����+�#�"���"������#" ����"�����"�� ���"���#�#�����������#����������#�� ������������

:� ���� �#��#���+� ��"�����#"��� �+"� ������� "�*��T3

� �� "���#��<���#"��

� ��"����#�E���#"#�

� ��"��;�"#0���#

� ��"����#�<���#"��

� 1�G������

����"+��#���#"���+����+���#��������#"���#�#���#���"#�"����"���� "��"�����+�G���

� 1�."��#"������

-���#"+��#���#"�����"���+���#��������#"���#�#���#����"#�"���"���#�����#���������#���+�."��#"�����#�+��#���@���#"#"�#�������������#�������� ��������"+�#�������"������ ������"� ��"���#"��� �

Manufacturing and Distribution Planning

9–8 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

� )���5�#�"� ����

-���#"+��#���#"�����"���+���#��������#"���#�#���#����"#�"���"��������#�"� ���#���������#����.��#�����#����������"+#�������"������ ������"�� ��"���#"��� �

� A�����<�#��"G�

����� /&��������

A����������� ���0�05 �������.���+���*��������*��������#��#��#��" �.�

�"� ��������#������ "������� ��

)� ���. ����� (�#"���+�����#��#�"��"��#��#������.���+���*����+��

#��������#"���#�#���#��#����������"���#"+�"���#��

��#�++���#��+����#�� �. ��*�#������ ����������#��

���#���#"���+����������#������ "������� ��� ���

�����#"���������"����

�� "���#��<���#"�� ���� ���#"������"����#���� ��.���� "�����#����������

��#"�� �����"�"������*�����*����#��

��"����#�E���#"#� ��"�"�#���@���#"#��#������ "��"��" "���#���"�����

�"�"����

��"��;�"#0���# ����#������@���#"#���+����#�"���#��#��������"��#��

����+��#�"��������7#��"�� ���"�������#"#"��

����+��#�"������"�����#9������@���#"#��#��#�������#�

��#��"���#������.���+�.������� �.� �#��#������"

�����+���"��"����-#�� �����"+"������� ���

@���#"#"��

*�� ,������������� �����+++++++++++++ ++++++++++++++

-���#"+"��#������#�"����@�"����#��+�#������ "��

�����#����#��������#��#������ "������� ���"#

�� �� �#��#����"��"�����"#�������#�"��������� #"� �

������/�#�#���� ������@���#"#"�����������

��"����#�<���#"�� ����#"���"#�#�*�����"����#�#�������+���#������ "�H

���*�#��#�����#���H����*�������#������#�"��� ��

#���++�#�#����@�"�����#��#����#��"���#�����#�� ���#�

#��#�#����"����#���� ��#�*��� �����( ��*������

���"#��"�������� ��� � ���#"���+������������"#��

��� ��"�� ����#����"����#� ���#"���

1�G������ �������.���+���*����+���#��������#"���#�#���#�

#��#�#���@���#"#��.��*�#��" �.��+�G����"#�����������

����� ������". �����"��� ���"�� ������#���� �� �#�

#������� �#"���+�G���@���#"#��7����1)�9�

1�."��#"������ �������.���+���*�����+���#��������#"���#�#���#��

#��#�#�����#���������#���#���+�."��#"�����#�+��#��

@���#"#��������

Defining Supplier Contracts

9–9OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����� /&��������

)���5�#�"� ���� �������.���+���*�����+���#��������#"���#�#���#��

#��#�#�����#���������#���#��������#�"� ���#�+�

#���@���#"#��������

A�����<�#��"G� (��� ���#��#�"���#"+"��#��� �#�"G���@�"����#��+�#��

��� "��������#����#��������#��#������ "�

����� ���"#��� �� �#��#��������� �#�"G�������� #"� �

������/�#�#���� ������@���#"#"�����������

Processing Options for Vendor Schedule Master Revisions

Versions

Enter the version of each program. If left blank, ZJDE0001 will be used.

1. Purchase Order Header, ____________ Purchase Order Header (P4310) 2. Purchase Orders, Work With ____________ Purchase Order Detail (P4310) 3. Supplier Schedule (P34301) ____________ 4. Supplier Split Percentage ____________ (P43211)

Defaults

1. Enter the Document Type to ____________ display.

Defining Shipment Patterns

>�����#���+"�����"������������ "��#�����"������"����#��>���������+"������##���#��#�������#���+�@�������+���� "���� "��"���1���=��� ������������+"��������+�#���+� ��"����"����#���##��3

� ( ���*���

� �����5�����

� 5������#������1"�����+�#���+"#�����#�"�����*��+�#������#�

��+"�"����"����#���##������"#��+3

� ���#"����"����#���##��

� )��""����"����#���##��

Manufacturing and Distribution Planning

9–10 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

���������������������

1���#����)2���5)2���" ������#"��������78 :$$���8 :$ 9���������#�0����������� "��-�+���#"���

$� �����*��"#��A����������� ��5�#������� �#��#���+� ��"���+"� ������ "�*�1"���#�� ���#���� "������#���. ��*�#����3

� ����D��.�

� <"���D��.�

�� ������������������ "�*��� ��#�

� ���A����������� ��5�#��)��""������������"����#�2�##���+���#��1��������

:� �����"����#�2�##���)��""�������� �#��#���+� ��"���+"� �3

� �++��#"���1��

� ���

4� �����������������+�#���+� ��"�����#"����������"�����3

� ������

� 5�����

� ������

� ��������

� ������

Defining Supplier Contracts

9–11OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

� 1"���

� ��#����

&� ( #���#"�� ��������������+�#���+� ��"�����#"����������"�����3

� �����+�5��#�

� ( ���*����

!� �����������������+�#���+� ��"�����#"��� �+"� ���������"�����*3

� ���*�$

� ���*��

� ���*�

� ���*�:

� ���*�4

E���F����*�$�.��"���"#��#���+"#������+�#������#���1���=��� �������*��"��#�.�����������#�������������

�� ( #���#"�� ������� �#��#���+� ��"�����#"��� �+"� ���������"�����*3

� )������������*�79

%� � "�*��T�

E���3������#��������#�����"����#���##������"�������������"���.�#�*"�����1����="#�#����"����#���#���5��"+"��#"���#��#������ �������#���"����#���##�����������+���#�����*��"#����"����#���#��+���

����������C��#��#�����"����#�2�##���)��""���+����� ��� ������. ��*�>���������������+�#���+� ��"��3

� ��#�������� ������������#���������"����#���##��

� ;��#�����*��"#����"����#���#��+���#���"� ���#�������#��"����#��##��

����� /&��������

�����+�5��#� �����+�#������#��7�$�#��� $9

( ���*���� (������+��� ��#"���� ���*�����"�������*�

)������������*�79 (������#��#���#��"���#������* ����##���#��#�#��

�#���.�" ��.�������#����++��#"���+�����#��

A� "���������3

$ ��������*�"������ ��

� ��������������*�"������ ��

Manufacturing and Distribution Planning

9–12 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

���%�����������������

1���#����)2���5)2���" ������#"��������78 :$$���8 :$ 9���������#�0����������� "��-�+���#"���

$� �����*��"#��A����������� ��5�#������� �#��#���+� ��"���+"� ������ "�*�1"���#�� ���#���� "������#���. ��*�#����3

� ����D��.�

� <"���D��.�

�� ������������������ "�*��� ��#�

Defining Supplier Contracts

9–13OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

� ���A����������� ��5�#��)��""������������"����#���#��+���#��1��������

:� �����*��"#����"����#���#��������������������� "�*��� ��#�

4� �����"����#���#��)��""������"���#����"����#���##����-+����������"��#�����##���.������ �#"���#���+� ��"���+"� ��+����������"��#�����#�3

� ��"���. �����

Defining Supplier Split Percentages

6�����+#�������#�������"#���+����� #"� ����� "��#�����"��� �"�������"�� ����� "������� "������� "���� ����� #"� ����� "��#����� ����"�� �"#���.�������������#��"����� "#������#�����;������ "���� "#�2����#���#����+"���#���� "#������#����������#������ "��

Manufacturing and Distribution Planning

9–14 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

���������������������������

1���#����)2���5)2���" ������#"��������78 :$$���8 :$ 9����������� "���� "#�2����#����

$� �����*��"#������ "���� "#�2����#��������� �#��#���+� ��"���+"� ������ "�*�1"���#����+"���� "#������#������������� "�3

� 6����02 ��#

� -#���D��.�

�� ������������������ "�*��� ��#�

Defining Supplier Contracts

9–15OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

� ������� "���� "#�2����#����)��""�������� �#��#���+� ��"���+"� �3

� (����D��.�

� ���"�#"��

� �� "#�2����#

� �++��#"���1��

� �++��#"������

:� ���� �#��#���+� ��"�����#"��� �+"� ������� "�*��T3

� (��+���#�

� 6�����2 ��#

����� /&��������

�� "#�2����# ���������#������� "���

1������ ��)� ���������� "��3�����������#�����+�#��

� ������@���#"#��#��#�#����#������ "��#��#��

�������"������ "�������#�#� �� ������@���#"#����#

�@�� �$��Q���#���"���#����#����"� ��������

������

Manufacturing and Distribution Planning

9–16 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����� /&��������

�++��#"���1�� (���#��#��#�"��"��#�������+�#���+� ��"��3

� ���������������#���#�����"�#���++��#������." �+���#�"�

� ���������#"���#�������"�#���++��#�����@���������#�����#"���+�����"#��

� ��������#������� ��"�"���++��#

������+�� #�"�#�������#��#�����#���>���������#�

+�#����++��#"�����#����#��#�#����#���� ���+�

�����"�����������-#���#��#������� ������++��#"���"�

#���+�#�������#" �.������������������"G���"��2����#

��#"���������1 ���5��������#�����������"#�

)�@�"����#�2 ���"��������5�#�"� �)�@�"����#

2 ���"����#�����#��"����� "����������#�.�

�++��#"�"#����#�����#�.��#���." ��+���#�"� ���""��� ��� �

�����+����"� �����#��.�������#����++��#"�"#����#�

������#��

�++��#"������ (���#��#��#�"��"��#�������+�#���+� ��"��3

� ���������������#���#�"���� �����"���++��#�����." ��+���#�"�

� ���������#"���#���"���� �����"���++��#�����@���������#�����#"���+�����"#��

� ��������#������� ��"���� �������#"��

������+�� #�"������.�� $��+�#�����+�� #�������+"����"�

#�����#���"�#"�����+�����#����������>����>������

��#��+�#����++��#"�����#����#��#�#����#���� ���+�

�����"�����������-#���#��#������� ������++��#"���"�

#���+�#�������#" �.������������������"G���"��2����#

��#"���������1 ���5��������#�����������"#�

)�@�"����#�2 ���"��������5�#�"� �)�@�"����#

2 ���"����#�����#��"����� "����������#�.�

�++��#"�"#����#�����#�.��#���." ��+���#�"� ���""��� ��� �

�����+����"� �����#��.�������#����++��#"�"#����#�

������#��

9–17OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Generating Supplier Schedules

1���#����"�� ���"#��2�"��"��2 ���"�������#"��������78 :��9�������8����#������ "�������� �+

;��#���8����#������ "�������� ��#���������7���9�#�������������#��5)2��-+����������#����#���8����#������ "�������� ������������������������������������� ��������#���������#��"� ���#������������#������� ��#��#������ "��

��������������#��#������ "������� ���#����#������#���������+��#�����#�����#�5)2������#"����. ��*�#����������#���"�+���#"�����+"����"�#������� "�������� ��5�#��#�. ��#�����#������� "������� ��������#����#��"����������+���#���5)2�������

>��������#�#��������"�#������"�����#"���������� "�������� ��8����#"��#��� ���5)2��������+#������� �������#"���������#���� ����� ��#���������"�"���#���� ���. ��#"���+�����

�������3������#��������#��������������#����#�����������#���#���+���5)2�

��������������#������� "������� ���#����#������#������+#��+������� "������� �������"�#������#�#��#���#�" ������"������"��#��#��"��#��*��������� "������� ��"��++��#"����>���������"���#�����+#��+������� "������� ���"�����#�0������������� ��������*��������������""����"��#������"##"���#����+"�� ������ ��

-+���������� #"� ����� "���#����#������#���� #"� ����� "������� ��+���"�� ��"#����-#�������.��� "##"���#���5)2�������.��#��������#����#��#������+"����"��#������� "���� "#�2����#����#�. ��71: �$$9�

>������������"��#���������� �#����#���+����� � �����"����-��#����� � �����"�����#�����#����#���� ���"#���"�� #����� ��.���"���� #"� �����������"���#����#�*��� ������������#����=���#����.�#�����������������#��#��������#���������������������� � �����"����#�������"����"��"+"���#���+���������"�����"������ "�"#����� ��.��#��

���.���+�������#��#�������" �. �������������

(�����#���.�#�����"���"����#���#�������� � �����"����-��#�"��"����#����#������������"�����#"���#��#�"��"��#��#������.���+���+"�����������������#������#����������#���=���#��#���.�#�����"���

Manufacturing and Distribution Planning

9–18 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Before You Begin

� A�"+��#��#�#���+� ��"���"�+���#"������.�����#���3

� �����)2���52���#��

� (����#"���. ��*�#�����+��#���"#��

� (��"�#������ "��"�+���#"���+��#������

� ����. ��*�#����������#����� "���#���������#�#��"��#�����"����+��� �0�������"�� �"���� ��#��#����������"������ "������ �������#"��

� )���#���52�05)20�)2������#"�����#��#�#����#������3

� ���#������������+����� "������� ���"#��

� 2��������#"��C�"����#�"� �� ���������������� �G��#���"����#�+�����"���#�������#����/��#�� ���"�������#"��

� )��"���������+���#���5�������#�" �+��

See Also

� �������������������������������

� '�������������������'���� �

� ����������'�����,$���������'��������

� !��"���#����������

� �����#�����2� �'�����

� ��������'�������'��������

� �455667'�������'������������������"��#����������������+�������#��� �

Processing Options for Generating Supplier Schedule Report(R3440)

Defaults Tab

���������"�����#"���� �������#�����"+��#��������#"���#�#���#���������#�#�����������"�����"����+�#������ �0�������"�� �"���� ��#��##����#��������������������#������� "������� ��

Generating Supplier Schedules

9–19OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

1. Generation Start Date

;��#�"�����"�����#"���#�����"+��#�����#��#��#�#����#������#��#�#�#������ "�������� ��8����#"���������-+����������#����"+������#���#����#�����#�������#���#��

2. Document Type

;��#�"�����"�����#"���#�����"+��#����������#�#����+����"���#��������������+�����"#��H�. ��*�#�������"���#������� "�������� ��8����#"��������-+����������#����"+��#����������#�#�����#����#�������6�7. ��*�#���9�

3. Supply/Demand Inclusion Rule

;��#�"�����"�����#"���#�����"+����"�����"����+�#������ �0������"�� �"���� ��#����#����������"�� ����+"���#����"#�"��#��#�#�����������#��� ��#�. ��*�#�����#�����#������ "������� "��������

Process Tab

���������"�����#"���� �������#�����"+������#����#���� ����������������#��#�������� ���-�����"#"���������������"+��#���������"����"���#���#������������

1. Supplier Schedule Status

;��#�"�����"�����#"���#�����"+��#�������� ��#�#���+#��#����#�����#������� "�������� ��8����#"����������-+����� �����#�"���#"���. ��*��#���#���������#�����#��#�������� ��

2. Clear Messages

;��#�"�����"�����#"���#�����"+�����#���#����#���� ���52�05)20�)2�������+#��"#����#������� "�������� ��8����#"���������7) ::$�9�A� "���� �����3

6 ��* �����#���������#�� ����������+#��#������� "�������� �8����#"������������

$ �����#���� ����������+#��#������� "�������� ��8����#"�����������

3. Regeneration Flag

;��#�"�����"�����#"���#�����"+�����#���#����#����C���#������� "������� ��8����#"��������������#����#���������"�� ��� ����52�05)20�)2�������������#����"� ����������� ���+#��#���5)2)������#"����������������A� "���� �����3

Manufacturing and Distribution Planning

9–20 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

6 ��* �����#������� �����������$ �����#���������#����� �����������

4. Frozen Days Flag

;��#�"�����"�����#"���#�����"+�����#���#����#���"�����#���+�G��#"���+�����+����� "��� ��������� ������� �����#"����"#�"��#���+�G��#"���+������-+�#����#���"�����#���+�G���#"���+������"#�� ����@���#"#"��"#�"��#���+�G���#"���+������A� "���� �����3

6 ��* �����#���������#�"�����#���+�G���#"���+������ �����#���"�����#���+�G���#"���+�����

5. Transfer Order Messages Flag

;��#�"�����"�����#"���#�����"+�����#���#����#���"�����#���#��+�������������" �������#"���#�������� ���-+�#����#���"�����#���#��+������������"#������ ��@���#"#"���� ��+��#��������������������A� "���� �����3

6 ��* �����#���������#�"�����#���#��+������������� �����#���"�����#���#��+������������

9–21OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Revising Supplier Schedules

>���������"���������"��#������ "������� ��#��#����������#����1��=��� ��������"��#������#�����"����#��C����� ���@���#"#"��#��������#��+�� �#C�"��#���������#��#�������� ��

(+#��������"���#�������� ��������*���������������""����������#�����#�#���"�+���#"��������#�0������������� ��#������"#�#����+"�� ������ ��

��#�0������������� ��� �������#�3

� )��"���� �������� �����������"#�"�� �@���#"#��"�+���#"��

� �"� ���#�������#���� "������� �

� )��"������� �#"���@���#"#��"�+���#"��

� ;���#��� ������@���#"#"��"��#�������� ��.�+�������� ����#���

� 1"�� "G��#������ "������� �

����2 ������+"� ��"�#����� ��+"� ��#��#�������������������#���(��0������������ ��+���������#������ �� �#��#���@���#"#"��"��#������� �#"���1�G������� �#"���1�."��#����������� �#"���)���5�#�"� �+"� ����������������"�����

(����������#��#�������*��#��#�������� ���" ���#�++��#�#�����#�����#�52��5)2�����)2������#"����(+#������� ����#������ "������� ���������#������������+��#���. ��*�#������ �����#�����=#�52���5)2�����)2�����#"���#��#�#�������������������" �. ����� ��"#���

Manufacturing and Distribution Planning

9–22 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

���%��������������������������������

1���#���5)2���" ������#"��������78 :$ 9���������#�0������������� �+

$� �����*��"#��A����������� ������� �#��#���+� ��"���+"� ������� "�*1"���#���"� �������������. ��*�#�����#��#��="#�+��#���� ��#��"#��3

� -#���D��.�

� 6����02 ��#

� (��+���#�

�� ������������������ "�*��� ��#�

� ���A����������� ��)��""������"���#���+� ��"���"�+���#"��3

� ���� "�

� ��"��D��.�

� �� "���#�

� �#�#�

� 1���6�

� <�#�) �2���

� <�#�)���"�#

� )���"�#�E#�

� ����)���"�#

Revising Supplier Schedules

9–23OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

� ����1�G��

� ����1�."��#�

� ����)���5�#�

:� (����#�#��������.��� "�*"����T�������� �#��#���+� ��"���+"� ��#�����#��� ������@���#"#"��"��#�������� ������#����� "�*��T3

� 2 �����

����� /&��������

���� "� (����.��#��#�"���#"+"�������#��"��#���(����6��*

�#����;��#�"����.��#��"���#"+����� �����

��� "���#����#"�"���#����#�������� "���#����#���

���#"�������������#��������.��*����.��

��"��D��.� ���������.��*����.���+�#�����"�����"���"

���"+"���.��#�����#������.����������"G�#"����>��

�"��#����#�"���"��.�������+���#���@�"����#��

���"� ����� "����@�"����#�

�� "���#� ���� ���#"������"����#���� ��.���� "�����#����������

��#"�� �����"�"������*�����*����#��

1���6� (������+"���������7:�01)9���"���#"���#�����#����.�

��"������ "���"����#������ "������1���=��� ���#��

��� "����� ���� "���#���������*����������� ���"�*���

#����"����#��#�#������ "�H����*�

>�������� �����#���������#��"��"��#��������

����"." "#��+��+�"��#��������1���=��� ����������

������������"��"��#"���#��#�#�����#���� ��� ��#�*�

���"����+��������������#���� �����#������ "�

������������"�����". ��+��#����#�#"��������

#��#�����#"��#"���

-#���D��.� (����.��#��#�#����#����"���#�����"#����-#�����.��"�

��#�� �������#�"��"#������.��+���#�

1���������*������#���"#������.��"�#��������

6����02 ��# -���#"+"����.�������� ��#�

D���3�>���������#�����.�����������#��"��#�"

+"� ��������#���"��#C/�#"+"��#����7+���=��� �����$�

��������S�S�S���$� 9��>��������#� ���#��.�"�����"#

+����"�����������������#��"#��

(��+���#� �������"����"����#���#��+���"#������ �������

������������������� ���������������������

#�"���#��#���� �� �#�����" �. ��#�����"��7(�29

"�+���#"������"��� �������.����#���#"�� ���� �� �#��

��"���� ��������#�����"���#�������#�#�������#��#

#���"#�������.���"�����+���#�����������

Manufacturing and Distribution Planning

9–24 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����� /&��������

�#�#� ��������#�#�#���+�#������ "������� �����"�"

����#�����#�������� �������#������#����#���

<�#�) �2��� (����.��#��#�"���#"+"��#����"�"�� ��������#���������

��������"���"��������� "��������/���� ���#��������

���������#��+�������������"���#����"�"�� ��������#

���.���� �#�#����#����"���"#�#������D�=#�D��.��

5�#��"����������#�7���59����.��"���#"+��� �#��

�������#�"��#���(�����#�)���"��. ������(�����#

2���. ���#����������=��� ����3

� (�#���#��05���� �2�����#�"�"�� ��������#�C�A�����5�#��"����������#�C�2�����#

� (0)��"�"�� �-���"���"�"�� ��������#�C�-���"��

� )���"�#�(�� "��#"���"�"�� ��������#�C�-���"��5�#��"����������#�C�)���"�#

� ���"#�5���0(�/�#���#�"�"�� ��������#�C�-���"��5�#��"����������#�C����"#�5���

� ;���� "���)���"�#�"�"�� ��������#�C�)���"�#

<�#�)���"�# ������#��#��#�#��� �#��"����#��+�#���"#���������"����

)���"�#�E#� ����@���#"#�����"�������#�����#�����#��"����#�

����)���"�# ����@���#"#�����"����#����#�����"�#���. ��*�#�������

����

����1�G�� )�� #�"������ �� �#"���

����1�."��#� )�� #�"������ �� �#"���

����)���5�#� )�� #�"������ �� �#"���

Processing Options for Supplier Schedule Revisions

Versions

Enter the version for each program. If left blank, version ZJDE0001 will be used for 1 through 7.

1. Open Order Inquiry ____________ (P4310) 2. Supply/Demand Inquiry ____________ (P4021) 3. Purchase Order Entry ____________ (P4310) 4. Vendor/Blanket Information ____________ (P4321) 5. Pegging Information ____________ (P3412)

Revising Supplier Schedules

9–25OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

6. Supplier Schedule Release ____________ Generation (R34410) 7. Item Branch (P41026B) ____________ 8. Enter the version of ____________ Supply/Demand Inclusion Rules to use for active Blanket Order selection

Defaults

1. Enter the Document Type to filter on the form

Document Order Type ____________ 2. Supplier Self Service ____________ Functionality

blank = Bypass Supplier 1 = Activate Supplier Self Service functionality for use in JAVA/HTML

Status Update

1. Enter Status for Vendor Schedule Update

Vendor Schedule Status ____________

2. Enter status beyond which changes cannot be made to the Vendor Schedule. If left blank, the schedule will always be open to change.

To Status ____________

Manufacturing and Distribution Planning

9–26 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

9–27OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Releasing Supplier Schedules

1���#���2�"��"���"�� ���"#��2 ���"��������78 :��9��������)� �������� "������� ��

(+#������+"�� "G��������� ���"�����#�0������������� ������������ ����#������#���� "������� ���(+#��#�������� ��"���������#����#�������#�#���� ������@���#"#"��"�"���#���#"���+�����

����)� ���������������##���"����������������="#"���. ��*�#������������ "��� ����"�+���#"���#��#�"����"+"��#�������. ��*�#�����#�����#�3

� 2���������������#���+���. ��*�#������ ����+��� �@���#"#"�#��#�����������"�"���#���#"���+����

� (��"��"�������� ��.���������������������#���"#����#����"��"�� ���#"���������#�����+"������"�. �

� (�"�� ��������������"#���� #"� �� "���+��������"++���#�� ������#������� #"� �� "���+�������"#���� �����+��#������ "�

>������������"��#���������� �#����#���+����� � �����"����-��#����� � �����"�����#�����#����#���� ���"#���"�� #����� ��.���"���� #"� �����������"���#����#�*��� ������������#����=���#����.�#�����������������#��#��������#���������������������� � �����"����#�������"����"��"+"���#���+���������"�����"������ "�"#����� ��.��#�����.���+�������#��#�������" �. �������������

�����#������#��������#���.�#�����"���#�������� � �����"����-�#�"���"����#����#������������"�����#"���#��#�"��"��#��#������.���+���+"�����������#��#�#����#������#���=���#��#����.�#�����"���

Before You Begin

� 8����#��������#���� "������� �����������������'�������'��������+

See Also

� ��������������������������������+������"�+���#"������������� � ����"�����*

� �455867'�������'�������������������������"��#����������������+������#���� �

Manufacturing and Distribution Planning

9–28 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Processing Options for Supplier Schedule Release Generation(R34410)

Defaults Tab

���������"�����#"���� �������#�����"+������+�� #��� ���+�� "���#����.��"��"���#�#����������#�#���������#�=�����

1. Line Type (Required)

;��#�"�����"�����#"���#�����"+������+�� #� "���#�����<"���#�������#� ����#����#��������� "��������#����#"�������� "���#�����++��#�#����#���"#����"���#���#����#"���"�#�+�����������8���� �(�����#"������.���#�(�����#�2���. ���(�����#�)���"��. �������-����#���5��������#������ "��#����� �����"+"��#�������"#"���+��"�� ��"����� "���������#�����"��� �� �#"��������+� ��"�������=��� ���+��� "���� ���#��#�#����#�������+"�������#���<"�����������#��#�)��""��������3

� �#��*�"#���� ��.���#���.���#��#���������"���#��#���8���� �<����6 80<�������#�����"#������.�D D���#��*�"#��1 1�"��#� ��=#�"�+���#"��5 5"�� �������������������"#� ��*����

�����#������ "���#������ ���#�����#�������������������������#������ "�������� ��)� ����8����#"���������

2. Beginning Status (Required)

;��#�"�����"�����#"���#��"��"��#��#���"�"#"� �#�#���+��������������#��##����#��������#��

3. Document Type

;��#�"�����"�����#"���#��"��"��#��#����������#�#����+��������������#��#�#����#��������#���-+����� �����#�"���#"���. ��*��#����#������#���������#�#����+���������������7�29�

4. Default Tax Area

;��#�"�����"�����#"���#�����"+��#�����+�� #�#�=������>����������#���#�=����#��#�"��#����"��#��������.��*�+��#������.��"��#�����"�����+"� ���#���#��������.��*����.��+��#������ "���A� "���� �����3

6 ��* �����#������#���#�=�����+���#������ "�������.��*����.��

Releasing Supplier Schedules

9–29OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

$ �����#������#���#�=�����+���+��#����"��#�������.��*����.��

Process Tab

�������#"���� �������#�����"+��#�������"���#����#������#�������#�#������ "������� ��� ����

1. Supplier Schedule Status

;��#�"�����"�����#"���#�����"+��#������ "������� ��#�#��#��#�#���#����"����+#���������#������� "�������� ��)� ����������7) ::$�9��-+���� �����#�"���#"���. ��*��#����#���������#�����#��#������ "������� �#�#��

2. Clear Messages

���� "������� "������#���������+���#�����#�����#�5)2������#"���#���#��"�����������;��#�"�����"�����#"���#�����"+�����#���#��� ��52�05)20�)2��������+#��#����#������#������� "�������� ��)� ���������7) ::$�9�������#���� ����� ��#���������#��#����"�"���#��� ����+������A� "���� �����3

6 ��* �����#���������#�� ���������$ �����#���� ���������

3. Blanket Order Release

;��#�"�����"�����#"���#�����"+�����#���#����#�����#���#"�� ��� ���. ��*�#�������"���#������� "�������� ��)� ����������7) ::$�9��A� "��� �����3

6 ��* �����#���������#���#���#"�� ��� ����. ��*�#�����$ �����#�����#���#"�� ��� ����. ��*�#�����

4. Price Control

;��#�"�����"�����#"���#�����"+�����#���#����#����#"����#����"��+�����. ��*�#�������#���2�������#�2"���5��������#��#����A� "���� ����3

6 ��* �����#����#"����#����"���+�����. ��*�#�����$ �����#����#"����#����"���+���#���2�������#�2"���5��������#

�#���

Manufacturing and Distribution Planning

9–30 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

9–31OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Printing Supplier Schedules

1���#����"�� ���"#��2�"��"��2 ���"�������#"��������78 :��9�������2"�#���� "��)� ���+

>����������2"�#����� "��)� ����#���"�#������#��+�#������ "������� �������#������#���"�+���#"���#��#������������#�������#����#���+��� �����"#��#�����"����+���� �0�������"�� �"���� ��#��#������ ��#�#����#��#������#����"����#�����#����"����#������ ���� ���. �@���#"#"�������� ������������#��#�#����#��������#��+���#���6 ��*�#����)� ����

>������������"��#���������� �#����#���+����� � �����"����-��#����� � �����"�����#�����#����#���� ���"#���"�� #����� ��.���"���� #"� �����������"���#����#�*��� ������������#����=���#����.�#�����������������#��#��������#���������������������� � �����"����#�������"����"��"+"���#���+���������"�����"������ "�"#����� ��.��#��

���.���+�������#��#�������" �. �������������

�����#������#��������#���.�#�����"���#�������� � �����"����-�#�"���"����#����#������������"�����#"���#��#�"��"��#��#������.���+���+"�����������#��#�#����#������#���=���#��#����.�#�����"���

Before You Begin

� )���#���)� �������� "�������� ��.�#����������������������'�������'��������+

See Also

� �������������������������������

Processing Options for Supplier Schedule Print

Process

1. Enter the document type to use when retrieving an item’s blanket order. If left blank, ’OB’ will be used.

Blanket Order Type ____________

Manufacturing and Distribution Planning

9–32 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

2. Enter the status to use for updates to the supplier schedule. If left blank, no change will be made to the schedule’s current status.

Supplier Schedule Status ____________

Versions

1. Enter the version of Supply/Demand Inculsion rules to use for active blanket order selection.

Supply/Demand Inculsion Rules ____________ Version

Associated Text

1. Enter a ’1’ to print associated blanket order text. If left blank, no associated text will be printed.

Print Associated Blanket Order ____________ Text

Appendices

Manufacturing and Distribution Planning

9–34 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

OneWorld Xe (09/00) A–1

Appendix A: Action Messages

������#"���������+���)2052�05)2������+"����"�������+"���������#�. � :05������������#�������������C������������#��������#��������#������"��#�"�#�. ���

������,���������$*�3,��3,*�

�� $��������� �������

*���� �

������������������� � ��"���,��������

���������

"�� -����� ��������-�����

( ���"�������

����""����#� "#

�"� �����*�����>������������#���." ��+��#�"� �#�����#������# "#�

D0(

( ���"�������

6�5������#��="#�+�"#��

��������������"��� "��

D0(

( ���"�������

����� ���# "#

��������������"��� "���>�����#�� ������ �#��#���������

D0(

( ���"�������

��+����# "#

��������������"��� "���>�����#�� ������ �#��#���������

D0(

( ���"�������

<���#"���"G��

� �����������"� ����*�����

D0(

6 ����,�=���"#�

6 ��* � ���������������#����+"���������������#������*����

� ���������������#����+"���������������#������������

� ����� 6 ��* � ��������������#����� �#��#�����*������#� "#�"+�#�����������##���"��"�����������#�#��#�%%�

� ���� ���������������������� "��"#�����������#�#��#�%%%�

� ��+� 6 ��* � ���������������������*�����"#���@�"�����#��

� ����������������������������� "���"#����@�"�����#��

� �=���"#� 6 ��* � ���������������������*�����#�#��#��

� ����������������������������� "���"#���#�#���#��

1 1�G������ 1�G������ D����#"����@�"����������������"����#" �� �#������ �����

D����#"����@�"����������������"����#" �� �#������ �����

Manufacturing and Distribution Planning

OneWorld Xe (09/00)A–2

������,���������$*�3,��3,*�

�� ������������������� � ��"���,��������

���������

�������

*���� �

$��������� ��

��������-�����"�� -�����

�������

*���� �

$���������

8 -��������@���#"#�

6 ��* �"� �����*�����"#������#���@���#"#��� "�*��T�#�������#�#���������������#����� �� �#������������#������.���+��@�"����������#�

�"� ��������������"#������#���@���#"#��� "�*��T�#�������#�#���������

F �������#��@���#"#�

6 ��* �"� ���#����#������ ���>�����#����� ���������#���#��@���#"#��+��#������#�����#��

D0(

- -�������#�@���#"#�

6 ��* �"� ���#����#������ ���>�����#����� ���������#���#��@���#"#��+��#������#�����#��

D0(

< ���������@���#"#�

6 ��* �"� �����*�����"#������#���@���#"#��� "�*��T�#�������#�#���������������#����� �� �#������������#������.���+��@�"����������#�

�"� ��������������"#������#���@���#"#��� "�*��T�#�������#�#���������

5 5���� ��"���

;����#���#�=#

D����#"����@�"����������������"����#" �� �#������ �����

D����#"����@�"����������������"����#" �� �#������ �����

D ���#���#� 6 ��* � ���������������#��#����#������ ����"� ����#������ ����""���

D0(

� ��� 6 ��* � ���������������#����+"���������������#����*����

� ���������������#����+"���������������#������������

2 1"����� 1"����� D����#"����@�"����������������"����#" �� �#������ �����

D����#"����@�"����������������"����#" �� �#������ �����

Appendix A: Action Messages

OneWorld Xe (09/00) A–3

������,���������$*�3,��3,*�

�� ������������������� � ��"���,��������

���������

�������

*���� �

$��������� ��

��������-�����"�� -�����

�������

*���� �

$���������

� 12���/�#���#����#"��

� -�����

2�#�<"#

� ������

2�#�<"#

� �=���"#�

2�#�<"#

� ��+�

2�#�<"#

D����#"����@�"����������������"����#" �� �#������ �����(�#"���"�#�*������#������#�"#��H�������

D����#"����@�"����������������"����#" �� �#������ �����(�#"���"�#�*������#������#�"#��H�������

� 2�#�������

6 ��* D����#"����@�"����������������"����#" �� �#������ �����

D����#"����@�"����������������"����#" �� �#������ �����

Manufacturing and Distribution Planning

OneWorld Xe (09/00)A–4

OneWorld Xe (09/00) B–1

Appendix B: SynQuest Interface

����"�#�+����.�#���������� ��� �#"���"��5���+��#�"���2 ���"���������E��#�5���+��#�"���5������7559��� ������#��������"G��������#"�"G�#���� ���"��������=���#"���������+�#�������+ ���"��#�������+��#�"�����"�����#����"�"�#�+���� �#�����"�� �#�����#�"�#�������+"��������� �#��#��#"�"G������+��#�"���� ����"#�"��#����*��������#�"�#�

����"�#�+��������#���+� ��"���"�+���#"����"#��#������E��#�553

� ��*�������#���"�� ��"�����#� "#����#"��������"�#��#"��

� ��#��+��������������������"�#

� ��#��+��� �����������"�����+"��#"��

� -����#���.� ����

� -#���.����0� ��#���#�

� 6" ��+���#�"� �������#"�����#�

� 2 ������������#��+���5)2052�0�)2�� ���������������s

� )���������#"���+������E��#�55

� ����#�����#��+������E��#�55

����"�#�+����+��"#���.����0� ��#���#��� ������#�#�����+"�"#"����+�#��+� ��"�����������������#�"#�����#�3

� ���

� 5���"��

� <�.�

� �����#�-#��

�����#�����+"���#������������"����#���"#���"������� �������=��##����#�����E��#�55������"+"��#�� ������"�������� �.���-�����"#"����#��." ��+���#�"� �������#"�����#������#�����*�������#� "#�������#"�����#�����#��������@�"����#���#��+�����E��#�55�������#����##�����#���������@�"����#�#����." ��+���#�"� �����*�������#� "#�����������#�@�"����#�"������� ��������#���#�����=��#�#����#�����E��#�55�����"+"��#�� ������"�������� �.���@�"����#�+��������+��#����"#��������*�����

Manufacturing and Distribution Planning

OneWorld Xe (09/00)B–2

�����#���� ����+"�������#�"#�����"����#���"#���"������� ������=��#�#����#�����E��#�������#�"#������������#�"#�������.���##�����#��." ��+���#�"� �������#� "#�����#����#����=��#�#�����#��������#�"#���@�"����#�#�����E��#�

6�������#��������"�+���#"����#������E��#�55������������#�����@���#"#����/�#���#�#����*���������������������#���"������� ���������E��#�55�� ������#������� ���"#��#�������#"���#�#��"��#�����*������#"������#���.��#���������@���#"#"���������#���.��#���*�������� �#"������"�"�#�+����"�.�������#��������������-�#�����." "#��5��� #��#����������#��"�.�����������#.�����#����#"���#�����"����+#�"�C��#��� �#"������������E��#����"��������#����".������#���#���#������E��#�5���+��#�"���5������"�#�+����

Inbound Messages

��������������#��������#"���� ���"�����E��#��#����#�������#��#�������������#�. ��������#���#"�� ��������5)2����������"+���������� ��������#����+���#�����#�" �5�����)��"���������72 :$$9�������#�������#������������#���+� ��"���#�����+������3

$ ��+�

/ �=���"#�

! -����������@���#"#�

9 �����������@���#"#�

Inbound Synchronizer Events

�����#����#������#������E��#�55�#�����#���#��+��#�������+ ����#��"�#�+�������"�������#�.��*�+������E��#�55�#������#���+� ��"�������3

� -�.�����F�������E���#"#"��7) $$��U$-9

� -�.�������*��������� �#"���7) $$$:U$-9

Appendix B: SynQuest Interface

OneWorld Xe (09/00) B–3

����+� ��"���#�. �����".��#�������#�����������#��#������������� ��#�����#��#�������+ ������#� ��#���"������� ������� �+#��� �������".�#������E��#�����#M�#���"��#��� �������".��#�������� ��#����#"������#���������#��#�������#����

��������������������

���������������

(��������#��#���#�#���+�����*�������#"����"#�"�

���E��#�#��#�����#��#���#�#���+�#�����#"�������#"��

"������� ���������������#���-�.�����F������

E���#"#"��2�����������7) $$��U$-9��#����#��

����#��#���#�#���+�����*�������#"���

*���������������

+���������������������

��������

(����#��+�#�����������@���#"#"������#��+������#"��

����#"����"#�"�����E��#�����#��#����������

@���#"#"���+�����#"�������#"���"������� �����������

���#���-�.�����F�������E���#"#"��2����������

7) $$��U$-9��#����#������#���������@���#"#"�

���"�#�����#"�������#"���

*�������'�� �����

����������

(����#��+�#�����*��������� �#"����"#�"�����E��#

����#��#�����*��������� �#���@���#"#������*����

#�#����.�#��+������*������������������������#��

-�.��������� �#"���2�����������7) $$$:U$-9��#��

�#������#���*��������� �#"���

-������#"���#������E��#�5���+��#�"���5������"�#�+�������"#��+�#��+� ��"���#�*3

� ��##"��������#���=��#����#�

� ��##"������+ �#�+" ����C�+�����

� ��##"����������"�����#"��

� ��##"������;�������"��

� ��##"������8���"����#��-#�������"��

� ��##"�������@�"����#�+����������+"�"#"����=��#

� <�����"�����#.������.�#���;6�

� �=��#"���� ����������#��#������E��#�55

� )���"�����#.�����"#���.� ����

� )��"��"���#�������"��� ��

Manufacturing and Distribution Planning

OneWorld Xe (09/00)B–4

Setting Up Data Export Controls

>�����+"���#����=��#�"�+���#"���+��#���"�#�+�������##"��������#���=��#���#� ����"#��+3

� ��##"��������#���=��#����#� �+����*����������

� ��##"��������#���=��#����#� �+����*�������#� "#

� ��##"��������#���=��#����#� �+����*�������#"���"�#��#"��

� ��##"��������#���=��#����#� �+������������

� ��##"��������#���=��#����#� �+��." ��+���#�"�

� ��##"��������#���=��#����#� �+����#"��

� ��##"��������#���=��#����#� �+��"#���.�������#�

� ��##"��������#���=��#����#� �+����������������"�#

� ��##"��������#���=��#����#� �+��� �����

� ��##"��������#���=��#����#� �+���"�����+"��#"��

����������&��������������'�� ������������

1���#��������1 ���5��������#�-�#�����." "#�������78 $ $$9����������#��=��#����#� �

$� �����*��"#����#���=��#����#� ��� "�*�(���

Appendix B: SynQuest Interface

OneWorld Xe (09/00) B–5

�� �����#���=��#����#� �)��""����#����������"��#���+� ��"���+"� �3

� �����#"��

� ��������"��#���+� ��"���+"� �3

� ��������

:� �����) $�>D�$�"��#���+� ��"���+"� �3

� ;6��D���

4� ������R������$�"��#���+� ��"���+"� �3

� A�"��

&� �����$�"��#���+� ��"���+"� �3

� �=���#��1��(��

� �=���#��1��;��

� �=���#��1����

� �=#��6��=��5���

� <������-����"�#� �

!� �������"��#���+� ��"���+"� �3

� �=���#��1��-�@

� 1 �#�1" ���=��5���

� �=#�(2-��=��5���

Manufacturing and Distribution Planning

OneWorld Xe (09/00)B–6

����� /&��������

�����#"�� (������#��#�"���#"+"����#����#"���.��#����

�������� (������+"���������7��0��9�#��#�"���#"+"��#���#�����+

�������#����"������� ��"��"��#��#����"�"���+�#��

#����#"�������������������������������#�#���

�����+����������"���"�������"�#������#"������#�

��"������#����#���#"���++�#���#"����"���#�����#

�������7�������#"�������#�� +C.� ���"�����������

�"�"�� ����#��#����9

����+� ��"����������#�#���������+"����.������

������������� ����#�.���������3

2 (�����#�2���. ���������#

) (�����#�)���"��. ���������#

� 2��� ��������#

- -����#����������#

� 2����������2���"����������#

� 8���� �(�����#"��0��"�#�-�#��#�6" "��

�������#

� �� ������2���"����������#

�� ��.���#��#

�2 2���������

)� ���#��#�6" "��

;6��D��� ��������� �����"#��#���"��./��#C.�������"�����

#��#��"��#���+#�����./��#����#���.�" �"���. ��*�+�

� ���� "��#"��������#��#����� ������������#����./��#

"���� #"� ����� "��#"����������./��#�"�#��*���.��#��

�./��#�<".�"�����=��� ���+������ ���./��#�"�� ���3

� 6�#���(�� "��#"���7���������#9� -�#���#"���(�� "��#"��� 6�"���A"��� 6�"���1���#"��� 6�"���1���#"�����#���#��#��� ����#�)� �� 5��"���./��#���#���#��#��

A�"�� (���C��+"�����#��+����"+"��#"���#��#����#� ����

��� "��#"����������#�����>��������"���#������

�����������#��+���C��+"��������"�����#"����� ��

������#��� ��#"��������@����"�����#"����-�#���#"��

��"���������"�#����"#����� "��#"���7��� �����

������ ��#"��9��6�#�����"���������"�#����"#��.�#��

/�.������#����������.�#���������������#������

����"���

�=���#��1��(�� (������#��#���#��"������#���#����#������#���.�#��

��� "��#"���#����������������#����#"��������

A� "���� �����3

$ ;��.�#������ "��#"���#���������������

#����#"�������

� �����#����.�#������ "��#"���#���������

������#����#"�������

Appendix B: SynQuest Interface

OneWorld Xe (09/00) B–7

����� /&��������

�=���#��1��;�� (������#��#���#��"������#���#����#������#���.�#��

��� "��#"���#��������������#���#����#"��������

A� "���������3

$ ;��.�#������ "��#"���#��������������#��

#����#"�������

� �����#����.�#������ "��#"���#���������

����#���#����#"�������

�=���#��1���� (������#��#���#��"������#���#����#������#���.�#��

��� "��#"���#����������� �#���#����#"��������

A� "���������3

$ ;��.�#������ "��#"���#����������� �#��

#����#"�������

� �����#����.�#������ "��#"���#��������

�� �#���#����#"�������

�=#��6��=��5��� (������#��#���#��"������#���#���#����#"�������

��� ��.���=��#���#������=#��� ���#�.�����A� "������

��3

$ �=��#�#����#"��������#������=#���

��#�.���

� �����#��=��#�#����#"��������#������=#���

��#�.���

<������-����"�#� � ��"�+"� �����#� �#���"����"�#���=���#"����+���.�#���/�.�

-+�#���+"� ��"��#�#����$��#���/�.��" ��=���#��"����"�#� ��

�=���#��1��-�@ (������#��#���#��"������#���#����#������#���.�#��

��� "��#"���#����������"�@�"���+���#����#"��������

A� "���������3

$ ;��.�#������ "��#"���#����������"�@�"���+��

#����#"�������

� �����#����.�#������ "��#"���#���������

"�@�"���+���#����#"�������

1 �#�1" ���=��5��� (������#��#���#��"������#���#����#����=��#�#��

#����#"��������#����+ �#�+" ��

A� "���������3

$ �=��#�#����#"��������#����+ �#�+" �

� �����#��=��#�#����#"��������#����+ �#�+" �

�=#�(2-��=��5��� (������#��#���#��"������#���#����#����=��#�#��

#����#"��������#������=#��� �(2-�

A� "���������3

$ �=��#�#����#"��������#������=#��� �(2-

� �����#��=��#�#����#"��������#������=#���

(2-

Manufacturing and Distribution Planning

OneWorld Xe (09/00)B–8

����������&��������������'�� ��������������

1���#��������1 ���5��������#�-�#�����." "#�������78 $ $$9����������#��=��#����#� �

$� �����#���=��#����#� �)��""����#�������2<�"��#���+� ��"���+"� �3

� �����#"��

�� ��������"��#���+� ��"���+"� �3

� ��������

� �����) $�>D�$�"��#���+� ��"���+"� �3

� ;6��D���

:� �����R������$�"��#���+� ��"���+"� �3

� A�"���F"#��

4� �����$�"��#���+� ��"���+"� �3

� �=���#��1��(��

� �=���#��1��;��

� �=���#��1����

� �=#��6��=��5���

� <������-����"�#� �

&� �������"��#���+� ��"���+"� �3

� �=���#��1��-�@

� 1 �#�1" ���=��5���

� �=#��6��=��5���

����������&��������������'�� ������������������������

1���#��������1 ���5��������#�-�#�����." "#�������78 $ $$9����������#��=��#����#� �

$� �����#���=��#����#� �)��""����#�������)�8�"��#���+� ��"���+"� �3

� �����#"��

�� ��������"��#���+� ��"���+"� �3

� ��������

� �����) $�>D�$�"��#���+� ��"���+"� �3

� ;6��D���

Appendix B: SynQuest Interface

OneWorld Xe (09/00) B–9

:� �����R������$�"��#���+� ��"���+"� �3

� A�"��

4� �����$�"��#���+� ��"���+"� �3

� �=���#��1��(��

� �=���#��1����

� �=���#��1��;��

� �=#��6��=��5���

� <������-����"�#� �

&� �������"��#���+� ��"���+"� �3

� �=���#��1��-�@

� 1 �#�1" ���=��5���

� �=#�(2-��=��5���

����������&���������������������������

1���#��������1 ���5��������#�-�#�����." "#�������78 $ $$9����������#��=��#����#� �

$� �����#���=��#����#� �)��""����#�������2��;��"��#���+� ��"���+"� �3

� �����#"��

�� ������2�"��#���+� ��"���+"� �3

� ��������

� �����) $�>D� �"��#���+� ��"���+"� �3

� ;6��D���

:� �����R������$�"��#���+� ��"���+"� �3

� A�"��

4� �����$�"��#���+� ��"���+"� �3

� �=���#��1��(��

� �=���#��1��;��

� �=���#��1����

� �=#��6��=��5���

� <������-����"�#� �

Manufacturing and Distribution Planning

OneWorld Xe (09/00)B–10

&� �������"��#���+� ��"���+"� �3

� �=���#��1��-�@

� 1 �#�1" ���=��5���

� �=#�(2-��=��5���

����������&�����������������������������

1���#��������1 ���5��������#�-�#�����." "#�������78 $ $$9����������#��=��#����#� �

$� �����#���=��#����#� �)��""����#�������6�5�"��#���+� ��"���+"� �3

� �����#"��

�� <�����#���+� ��"���+"� ��. ��*3

� ��������

� �����) ��>D�$�"��#���+� ��"���+"� �3

� ;6��D���

:� �����R������$�"��#���+� ��"���+"� �3

� A�"���F"#��

4� �����$�"��#���+� ��"���+"� �3

� �=���#��1��(��

� �=���#��1��;��

� �=���#��1����

� �=#��6��=��5���

� <������-����"�#� �

&� �������"��#���+� ��"���+"� �3

� �=���#��1��-�@

� 1 �#�1" ���=��5���

� �=#�(2-��=��5���

����������&����������������������

1���#��������1 ���5��������#�-�#�����." "#�������78 $ $$9����������#��=��#����#� �

$� �����#���=��#����#� �)��""����#�������)�;�"��#���+� ��"���+"� �3

� �����#"��

Appendix B: SynQuest Interface

OneWorld Xe (09/00) B–11

�� <�����#���+� ��"���+"� ��. ��*3

� ��������

� �����) ��>D�$�"��#���+� ��"���+"� �3

� ;6��D���

:� �����R������$�"��#���+� ��"���+"� �3

� A�"��

4� �����$�"��#���+� ��"���+"� �3

� �=���#��1��(��

� �=���#��1��;��

� �=���#��1����

� �=#��6��=��5���

� <������-����"�#� �

&� �������"��#���+� ��"���+"� �3

� �=���#��1��-�@

� 1 �#�1" ���=��5���

� �=#�(2-��=��5���

����������&����������������������������

1���#��������1 ���5��������#�-�#�����." "#�������78 $ $$9����������#��=��#����#� �

$� �����#���=��#����#� �)��""����#�������-��5�"��#���+� ��"���+"� �3

� �����#"��

�� <�����#���+� ��"���+"� ��. ��*3

� ��������

� �����):$�>D�$�"��#���+� ��"���+"� �3

� ;6��D���

:� �����R������$�"��#���+� ��"���+"� �3

� A�"��

4� �����$�"��#���+� ��"���+"� �3

� �=���#��1��(��

� �=���#��1��;��

� �=���#��1����

Manufacturing and Distribution Planning

OneWorld Xe (09/00)B–12

� �=#��6��=��5���

� <������-����"�#� �

&� �������"��#���+� ��"���+"� �3

� �=���#��1��-�@

� 1 �#�1" ���=��5���

� �=#�(2-��=��5���

����������&���������������������������������

1���#��������1 ���5��������#�-�#�����." "#�������78 $ $$9����������#��=��#����#� �

$� �����#���=��#����#� �)��""����#�������)�"��#���+� ��"���+"� �3

� �����#"��

�� ������2�"��#���+� ��"���+"� �3

� ��������

� �����): �>D�$�"��#���+� ��"���+"� �3

� ;6��D���

:� �����R������$�"��#���+� ��"���+"� �3

� A�"��

4� �����$�"��#���+� ��"���+"� �3

� �=���#��1��(��

� �=#��6��=��5���

� <������-����"�#� �

&� �������"��#���+� ��"���+"� �3

� �=���#��1��;��

� �=���#��1����

� �=���#��1��-�@

� 1 �#�1" ���=��5���

� �=#�(2-��=��5���

Appendix B: SynQuest Interface

OneWorld Xe (09/00) B–13

����������&�������������������������

1���#��������1 ���5��������#�-�#�����." "#�������78 $ $$9����������#��=��#����#� �

$� �����#���=��#����#� �)��""����#����������;��"��#���+� ��"���+"� �3

� �����#"��

�� ��������"��#���+� ��"���+"� �3

� ��������

� �����):��>D�$�"��#���+� ��"���+"� �3

� ;6��D���

:� �����R������$�"��#���+� ��"���+"� �3

� A�"��

4� �����$�"��#���+� ��"���+"� �3

� �=���#��1��(��

� �=���#��1��;��

� �=���#��1����

� �=#��6��=��5���

� <������-����"�#� �

&� �������"��#���+� ��"���+"� �3

� �=���#��1��-�@

� 1 �#�1" ���=��5���

� �=#�(2-��=��5���

����������&������������������������������

1���#��������1 ���5��������#�-�#�����." "#�������78 $ $$9����������#��=��#����#� �

$� �����#���=��#����#� �)��""����#����������"��#���+� ��"���+"� �3

� �����#"��

�� ��������"��#���+� ��"���+"� �3

� ��������

� �����):��>D���"��#���+� ��"���+"� �3

� ;6��D���

Manufacturing and Distribution Planning

OneWorld Xe (09/00)B–14

:� �����R������$�"��#���+� ��"���+"� �3

� A�"��

4� �����$�"��#���+� ��"���+"� �3

� �=���#��1��(��

� �=���#��1��;��

� �=���#��1����

� �=#��6��=��5���

� <������-����"�#� �

&� �������"��#���+� ��"���+"� �3

� �=���#��1��-�@

� 1 �#�1" ���=��5���

� �=#�(2-��=��5���

Setting Up Flat File Cross-References

>�����+"�����C�+������"�+���#"���+��#���"�#�+����+��"�.����������#.�����������

��##"������+ �#�+" ����C�+���������"#��+3

� ��##"��������C�+������+����*����������

� ��##"��������C�+������+����*�������#� "#

� ��##"��������C�+������+����*�������#"���"�#��#"��

� ��##"��������C�+������+������������

� ��##"��������C�+������+��." ��+���#�"�

� ��##"��������C�+������+����#"��

� ��##"��������C�+������+��"#���.�������#�

� ��##"��������C�+������+����������������"�#

� ��##"��������C�+������+��� �����

� ��##"��������C�+������+���"�����+"��#"��

������������������������'�� ������������

1���#��������1 ���5��������#�-�#�����." "#�������78 $ $$9��������1 �#1" ����C)�+������

$� �����*��"#��1 �#�1" ����C)�+�������� "�*�(���

Appendix B: SynQuest Interface

OneWorld Xe (09/00) B–15

�� ���1 �#�1" ����C)�+�������#����������"��#���+� ��"���+"� �3

� �����#"��

� �������"��#���+� ��"���+"� �3

� �"��#"���-��"��#�

:� �����$�"��#���+� ��"���+"� �3

� )���������

4� �����1:��$U$�"��#���+� ��"���+"� �3

� 1" ��D���

����� /&��������

�����#"�� (������#��#�"���#"+"����#����#"���.��#����

�"��#"���-��"��#� (������#��#�"��"��#��#����"��#"����+�#���#����#"���

)��������� ����"���#"+"������#����*���-�#����#"���������

������������#�" �"�+���#"�������"�"������-�+���#"��

�� ��

1" ��D��� �������.���+������"+"��#�. ���1���=��� ���#���8����

<�����5�#��#�. �������"�1�%�$������#����#�����

5���� ����#����������H������+�����"��

������#"���

Manufacturing and Distribution Planning

OneWorld Xe (09/00)B–16

������������������������'�� ��������������

>����#����#��� "����+�"�+���#"��������+��#�����������������+��#�����#�" �

1���#��������1 ���5��������#�-�#�����." "#�������78 $ $$9��������1 �#1" ����C)�+������

$� ���1 �#�1" ����C)�+�������#�������2<�"��#���+� ��"���+"� �3

� �����#"��

�� �������"��#���+� ��"���+"� �3

� �"��#"���-��"��#�

� ���#���+"#��"�� "����#����$�"��#���+� ��"���+"� �3

� )���������

:� �����1:��$U$�"��#���+� ��"���+"� �3

� 1" ��D���

4� ���#����������"�� "����#������"��#���+� ��"���+"� �3

� )���������

&� �����1 $$$U$�"��#���+� ��"���+"� �3

� 1" ��D���

������������������������'�� ������������������������

>����#����#��� "����+�"�+���#"��������+��#�����������������+��#�����#�" �

1���#��������1 ���5��������#�-�#�����." "#�������78 $ $$9��������1 �#1" ����C)�+������

$� ���1 �#�1" ����C)�+�������#�������)�8�"��#���+� ��"���+"� �3

� �����#"��

�� �������"��#���+� ��"���+"� �3

� �"��#"���-��"��#�

� ���#���+"#��"�� "����#����$�"��#���+� ��"���+"� �3

� )���������

:� �����1:��$U$�"��#���+� ��"���+"� �3

� 1" ��D���

4� ���#����������"�� "����#������"��#���+� ��"���+"� �3

� )���������

Appendix B: SynQuest Interface

OneWorld Xe (09/00) B–17

&� �����1 $$�U$�"��#���+� ��"���+"� �3

� 1" ��D���

�������������������������������������

>����#����#��� "����+�"�+���#"��������+��#�����������������+��#�����#�" �

1���#��������1 ���5��������#�-�#�����." "#�������78 $ $$9��������1 �#1" ����C)�+������

$� ���1 �#���C)�+�������#�������2��;��"��#���+� ��"���+"� �3

� �����#"��

�� �������"��#���+� ��"���+"� �3

� �"��#"���-��"��#�

� ���#���+"#��"�� "����#����$�"��#���+� ��"���+"� �3

� )���������

:� �����1: �$U$�"��#���+� ��"���+"� �3

� 1" ��D���

4� ���#����������"�� "����#������"��#���+� ��"���+"� �3

� )���������

&� �����1: $$U$�"��#���+� ��"���+"� �3

� 1" ��D���

���������������������������������������

1���#��������1 ���5��������#�-�#�����." "#�������78 $ $$9��������1 �#1" ����C)�+������

$� ���1 �#�1" ����C)�+�������#�������6�5�"��#���+� ��"���+"� �3

� �����#"��

�� �������"��#���+� ��"���+"� �3

� �"��#"���-��"��#�

� �����$�"��#���+� ��"���+"� �3

� )���������

:� �����1 ���U$�"��#���+� ��"���+"� �3

� 1" ��D���

Manufacturing and Distribution Planning

OneWorld Xe (09/00)B–18

��������������������������������

1���#��������1 ���5��������#�-�#�����." "#�������78 $ $$9��������1 �#1" ����C)�+������

$� ���1 �#�1" ����C)�+�������#�������)�;�"��#���+� ��"���+"� �3

� �����#"��

�� �������"��#���+� ��"���+"� �3

� �"��#"���-��"��#�

� �����$�"��#���+� ��"���+"� �3

� )���������

:� �����1 �� U$�"��#���+� ��"���+"� �3

� 1" ��D���

��������������������������������������

>����#����#��� "����+�"�+���#"��������+��#�����������������+��#�����#�" �

1���#��������1 ���5��������#�-�#�����." "#�������78 $ $$9��������1 �#1" ����C)�+������

$� ���1 �#�1" ����C)�+�������#�������-��5�"��#���+� ��"���+"� �3

� �����#"��

�� �������"��#���+� ��"���+"� �3

� �"��#"���-��"��#�

� ���#���+"#��"�� "����#����$�"��#���+� ��"���+"� �3

� )���������

:� �����1:$�$U$�"��#���+� ��"���+"� �3

� 1" ��D���

4� ���#����������"�� "����#������"��#���+� ��"���+"� �3

� )���������

&� �����1:$�$U$(�"��#���+� ��"���+"� �3

� 1" ��D���

Appendix B: SynQuest Interface

OneWorld Xe (09/00) B–19

�������������������������������������������

1���#��������1 ���5��������#�-�#�����." "#�������78 $ $$9��������1 �#1" ����C)�+������

$� ���1 �#�1" ����C)�+�������#�������)�"��#���+� ��"���+"� �3

� �����#"��

�� �������"��#���+� ��"���+"� �3

� �"��#"���-��"��#�

� �����$�"��#���+� ��"���+"� �3

� )���������

:� �����1: $�$U$�"��#���+� ��"���+"� �3

� 1" ��D���

�����������������������������������

>����#����#��� "����+�"�+���#"��������+��#�����������������+��#�����#�" �

1���#��������1 ���5��������#�-�#�����." "#�������78 $ $$9��������1 �#1" ����C)�+������

$� ���1 �#�1" ����C)�+�������#����������;��"��#���+� ��"���+"� �3

� �����#"��

�� �������"��#���+� ��"���+"� �3

� �"��#"��

� ���#���+"#��"�� "����#����$�"��#���+� ��"���+"� �3

� )���������

:� �����1:��$U$�"��#���+� ��"���+"� �3

� 1" ��D���

4� ���#����������"�� "����#������"��#���+� ��"���+"� �3

� )���������

&� �����1:�$$U$�"��#���+� ��"���+"� �3

� 1" ��D���

Manufacturing and Distribution Planning

OneWorld Xe (09/00)B–20

����������������������������������������

>����#����#��� "����+�"�+���#"��������+��#�����������������+��#�����#�" �

1���#��������1 ���5��������#�-�#�����." "#�������78 $ $$9��������1 �#1" ����C)�+������

$� ���1 �#�1" ����C)�+���������#��������"��#���+� ��"���+"� �3

� �����#"��

�� �������"��#���+� ��"���+"� �3

� �"��#"��

� ���#���+"#��"�� "����#����$�"��#���+� ��"���+"� �3

� )���������

:� �����1:��$U$�"��#���+� ��"���+"� �3

� 1" ��D���

4� ���#����������"�� "����#������"��#���+� ��"���+"� �3

� )���������

&� �����1:�$$U$�"��#���+� ��"���+"� �3

� 1" ��D���

Setting Up Processing Options

>����#��������"�����#"���#��"��"��#��#���#�����+�#����#"���#��#�#���#����=��#�#�����E��#�55�

��##"����������"�����#"������"#��+3

� ��##"����������"�����#"���+����*����

� ��##"����������"�����#"���+����*�������#� "#

� ��##"����������"�����#"���+����*�������#"���"�#��#"��

� ��##"����������"�����#"���+������������

� ��##"����������"�����#"���+��." ��+���#�"�

� ��##"����������"�����#"���+����#"��

� ��##"����������"�����#"���+��"#���.�������#�

� ��##"����������"�����#"���+����������������"�#

� ��##"����������"�����#"���+��� �����

Appendix B: SynQuest Interface

OneWorld Xe (09/00) B–21

� ��##"����������"�����#"���+���"�����+"��#"��

� ��##"����������"�����#"���+����*���������"��

�����������������������'�� ������

1���#�����#���(��"�"#�#"������ ������78F%�$$9��������-�#���#"��A�"���

$� �����*��"#��-�#���#"���A�"����#����2:��$ �"��#���+� ��"���+"� ������ "�*�1"��3

� -�#���#"���(�� "��#"��

�� ��������"���U������$�����#����������2���"�����#"���+���#��)��������

� � "�*�#���-�#����#�.�����#����������"��#���+� ��"���+"� �3

� �����#"�������

�����������������������'�� ��������������

1���#�����#���(��"�"#�#"������ ������78F%�$$9��������-�#���#"��A�"���

$� �����*��"#��-�#���#"���A�"����#����2 $$$�"��#���+� ��"���+"� ������ "�*�1"��3

� -�#���#"���(�� "��#"��

�� ��������"���U������$�����#����������2���"�����#"���+���#��)��������

� � "�*�#����=��#�#�.�����#�������2<�"��#���+� ��"���+"� �3

� �����#"�������

�����������������������'�� ������������������������

1���#�����#���(��"�"#�#"������ ������78F%�$$9��������-�#���#"��A�"���

$� �����*��"#��-�#���#"���A�"����#����2 $$��"��#���+� ��"���+"� ������ "�*�1"��3

� -�#���#"���(�� "��#"��

Manufacturing and Distribution Planning

OneWorld Xe (09/00)B–22

�� ��������"���U������$�����#����������2���"�����#"���+���#��)��������

� � "�*�#����=��#�#�.�����#�������)�8�"��#���+� ��"���+"� �3

� �����#"�������

������������������������������������

1���#�����#���(��"�"#�#"������ ������78F%�$$9��������-�#���#"��A�"���

$� �����*��"#��-�#���#"���A�"����#����2: $��"��#���+� ��"���+"� ������ "�*�1"��3

� -�#���#"���(�� "��#"��

�� ��������"���U������$�����#����������2���"�����#"���+���#��)��������

� � "�*�#���-�#����#�.�

:� �����$�"��#���+� ��"���+"� �3

� 6�+���-����

4� ��������2��;��"��#���+� ��"���+"� �3

� �����#"�������

��������������������������������������

1���#�����#���(��"�"#�#"������ ������78F%�$$9��������-�#���#"��A�"���

$� �����*��"#��-�#���#"���A�"����#����2 ����"��#���+� ��"���+"� ������ "�*�1"��3

� -�#���#"���(�� "��#"��

�� ��������"���U������$�����#����������2���"�����#"���+���#��)��������

� � "�*�#���-�#����#�.�

:� ��������6�5�"��#���+� ��"���+"� �3

� �����#"�������

4� �����$�"��#���+� ��"���+"� �3

� 6�+���-�����2���"��

Appendix B: SynQuest Interface

OneWorld Xe (09/00) B–23

�������������������������������

1���#�����#���(��"�"#�#"������ ������78F%�$$9��������-�#���#"��A�"���

$� �����*��"#��-�#���#"���A�"����#����2 �� �"��#���+� ��"���+"� ������ "�*�1"��3

� -�#���#"���(�� "��#"��

�� ��������"���U������$�����#����������2���"�����#"���+���#��)��������

� � "�*�#���-�#����#�.�

:� ��������)�;�"��#���+� ��"���+"� �3

� �����#"�������

4� �����$�"��#���+� ��"���+"� �3

� 6�+���-�����2���"��

�������������������������������������

1���#�����#���(��"�"#�#"������ ������78F%�$$9��������-�#���#"��A�"���

$� �����*��"#��-�#���#"���A�"����#����2:$��&�"��#���+� ��"���+"� ������ "�*�1"��3

� -�#���#"���(�� "��#"��

�� ��������"���U������$�����#����������2���"�����#"���+���#��)��������

� � "�*�#���-�#����#�.�

:� ��������-��5�"��#���+� ��"���+"� �3

� �����#"�������

4� �����$�"��#���+� ��"���+"� �3

� 6�+���-�����2���"��

Manufacturing and Distribution Planning

OneWorld Xe (09/00)B–24

������������������������������������������

1���#�����#���(��"�"#�#"������ ������78F%�$$9��������-�#���#"��A�"���

$� �����*��"#��-�#���#"���A�"����#����2: $��"��#���+� ��"���+"� ������ "�*�1"��3

� -�#���#"���(�� "��#"��

�� ��������"���U������$�����#����������2���"�����#"���+���#��)��������

� � "�*�#���-�#����#�.�����#�������)�"��#���+� ��"���+"� �3

� �����#"�������

����������������������������������

1���#�����#���(��"�"#�#"������ ������78F%�$$9��������-�#���#"��A�"���

$� �����*��"#��-�#���#"���A�"����#����2:�$��"��#���+� ��"���+"� ������ "�*�1"��3

� -�#���#"���(�� "��#"��

�� ��������"���U������$�����#����������2���"�����#"���+���#��)��������

� � "�*�#���-�#����#�.�

:� �����������;��"��#���+� ��"���+"� �3

� �����#"�������

4� �����$�"��#���+� ��"���+"� �3

� 6�+��0-�����2���"��

���������������������������������������

1���#�����#���(��"�"#�#"������ ������78F%�$$9��������-�#���#"��A�"���

$� �����*��"#��-�#���#"���A�"����#����2:��4�"��#���+� ��"���+"� ������ "�*�1"��3

� -�#���#"���(�� "��#"��

�� ��������"���U������$�����#����������2���"�����#"���+���#��)��������

Appendix B: SynQuest Interface

OneWorld Xe (09/00) B–25

� � "�*�#���-�#����#�.�

:� �����������"��#���+� ��"���+"� �3

� �����#"�������

4� �����$�"��#���+� ��"���+"� �3

� )���#�����#.�������.�#���;6�

�����������������������'�� ��������������

1���#�����" ������2����#"���C��"��#�������78 $$$9�����������2���"���

$� �����*��"#��6�#���A�"����������#��������"�#����"����+����2���"���7) $:$�9�#�����+����*���������"��������#���������2���"�����#"���+���#���)��������

�� � "�*�#���-�#����#�.�

� ��������2<�"��#���+� ��"���+"� �3

� 2�#�<"#������#"�������

:� �����$�"��#���+� ��"���+"� �3

� 2�#�<"#�6�+���-����

Setting Up UDC Mappings

>��������="#"�������������������+"���������#�����E��#�������(����"����������+"����.��������������������������#�������"+��#��������"���#������.�"��������

1���=��� �3

IA$A/�'����

����������

���D����

����������

$�

$4

��

1"���

:�

4�

)� ����

Manufacturing and Distribution Planning

OneWorld Xe (09/00)B–26

��##"������;�������"���"�� ����#���+� ��"���#�*3

� ��#����;���5���"��

� ���������"���+��#������E��#�"�#�+���

�����7$�������

1���#��������1 ���5��������#�-�#�����." "#�������78 $ $$9��������;���+"���������5���

$� �����*��"#�������5���"����� "�*�(���

�� ��������5���"���)��""�������� �#��#���+� ��"���+"� ������� "�*��T3

� 2����#�����

� )���������

� �"�-��

� �=#��� �A����D���

� ;����+�����

� �=#��� �����

� � #�>0D

�������3�������+�� #�+��#����� �#��>0D�+"� ��"�D����"�������������#��� �#���������#��������"#"�� �#������"���

Appendix B: SynQuest Interface

OneWorld Xe (09/00) B–27

����� /&��������

2����#����� (������+"���������7%�0�>9�#��#�"���#"+"��������������

�#���

)��������� (������#��#�"���#"+"��#���#�. ��#��#����#�"�������+"���

����������#�. ��"�� ���+����#������;���#����

�"�-�� (������#��#�"��"��#��#����"��#"����+�#���#����#"���

�=#��� �A����D��� ���������������#��#�#��������5���"���"�+��

;����+����� (� "#��+��� "�������+�������"+"�������+"��������� "#�

�=#��� ����� ��"��� �������#�"���� "#��+��� "���=#��� ����+"���

�����+�������"+"�������5���

� #�>0D ��"��������"���#�����#�������#��������� ��.�

�� �#���+���#���+" ���������+�� #��� ���"�D�

Processing Options for Code Mapping Revision

Process

1. Enter the default view mode. ____________ ’ ’ – View All Mappings (default). ’1’ – View Inbound Mappings only. ’2’ – View Outbound Mappings only. 2. Enter the Mapping revision ____________ mode. ’ ’ – Enter Mappings for UDC Values. ’1’ – Enter Mappings for Data Item Values.

��������������������D�������������

-#�"������������#��#�������"+��#������������"���#����#������#������#��#�� �#����#"����+�������� "���� ����"#�"������� ���������E��#������#������+� ��"������������"��3

$� ���������"���+��2����#�������������)������������

5�������� ��� �������������#�#����7����9�#�����E��#��"��@��#�����#�����>�������������#�������� ��� �������������##������ ���#��#��������#��=��#���#�����E��#�

�� ���������"���+��2����#�������������)����������2)

5�������� ����*������������"�"#��72)��9�#�����E��#���*�����"�"#��

Manufacturing and Distribution Planning

OneWorld Xe (09/00)B–28

� ���������"���+��2����#�������������)������������

5�������� ����*�����������#�#��7�)��9�#�����E��#���*����� ����#�#��

:� ���������"���+��2����#������ $�����)������������

5�������� ����*�������#"�������#"���#�#��7�2��9�#�����E��#��*�����#���#�#��

4� ���������"���+��2����#������:������)����������(�

5�������� ��� ��������*�����#�#��#�����E��#�� ��������*����� ����#�#��

5�������� ��� �����������������#�#��#�����E��#�� �������#"������ ��� ����#�#��

5�������� �������������#�#��7DR�)9�#�����E��#���#"������ �� ����#�#��

5�������� ��� ������#�#��7<��)9�#�����E��#��"���@��#�� ���#�#���>�������������#�������� ��� ������� ����#�#���#��#�������#��=��#���#�����E��#�

&� ���������"���+��2����#������:$�����)����������-

5�������� ��"#���.����0� ��#�#��*"���#����7��T�9�#�����E��#�"#����������#���#�����>�������������#�������� ��"#���.����0� ��##��*"���#������ ���#��#��������#��=��#���#�����E��#�

!� ���������"���+��2����#������F:������)����������1�

5�������� ��." ��+���#�"� ���������#�+"=�������"�. ��@���#"#�71�)E9�#�����E��#�." ��+���#�"� ���������#�+"=�������"�. ��+ ���

Setting Up Generic Data Item Mappings

>����������E��#������#��#������#����" �����" �. ��+�������� ���"������"����#��"#�������"����-�����"#"������+�� #��� ���+����#��"#���"����E��#����� ����+"��������

����#��������"����#��"#�������"������� �#��#���+� ��"���#�*3

� ��#��������"����#��"#�������"��

� A�"+������"����#��"#�������"��

Appendix B: SynQuest Interface

OneWorld Xe (09/00) B–29

��������������������������

1��������1 ���5��������#�-�#�����." "#�������78 $ $$9��������8���"���#��-#���5���

$� �����*��"#�������5���"����� "�*�(���

�� ��������5���"���)��""�������� �#��#���+� ��"���+"� ������� "�*��T3

� ��#��-#���5���"��

� �"�-��

� �=#��� �A����D���

� ;����+�����

� �=#��� �����

� � #�>0D

Manufacturing and Distribution Planning

OneWorld Xe (09/00)B–30

Processing Options for Generic Data Item Mappings

Process

1. Enter the default view mode. ____________ ’ ’ – View All Mappings (default). ’1’ – View Inbound Mappings only. ’2’ – View Outbound Mappings only. 2. Enter the Mapping revision ____________ mode. ’ ’ – Enter Mappings for UDC Values. ’1’ – Enter Mappings for Data Item Values.

�%��������������������������

-#�"������������#��#�������"+��#�������"����#��"#�������"���#����#�����#�������#��#�� �#����#"����+�������� "���� ����"#�"������� ��������E��#�������#������#���+� ��"�������"��3

$� 8���"����#��"#�������"���+����#��"#���-��5S�>2��

5�������� ��"#���.����0� ��#�#��*"���#����7��T�9�#�����E��#�"#��#����

�� 8���"����#��"#�������"���+����#��"#���-�5S�)-�����������+"��������5(2�

5�������� ��"#���.����0� ��#���#����������+"� ��#�����E��#�"#���"#"�� �+ ������"����"� �������+"���#���+"� ��������"#�"��"#��.����0� ��#�#��#�#���#���"#����"#"�� �+ ����� ���

� 8���"����#��"#�������"���+����#��"#���-�5S(<�)�����������+"��������5(2�

5�������� ��"#���.����0� ��#���#����������+"� ��#�����E��#�"#��� �#��������"����"� �������+"���#���+"� ��������"#�"��"#��.����0� ��#�#��#�#���#���"#���� �#������� ���

:� 8���"����#��"#�������"���+����#��"#���-�5S��1����������+"��������6;>�)�

-+�#���"#���.����0� ��#�.�������.��76;>)9�"�G�����. ��*��#���#������#����� �����+"����"��#�"�����#����+�� #�#������E��#�"#��.���������

Appendix B: SynQuest Interface

OneWorld Xe (09/00) B–31

4� 8���"����#��"#�������"���+����#��"#���-�5S��1����������+"��������1(5-<>�

-+�#���"#���.����0� ��#�� ���"���+��" ��72)2:9�"�. ��*��#����#�����#����� �����+"����"��#�"�����#����+�� #�#������E��#�"#��������#�+��" ������

&� 8���"����#��"#�������"���+����#��"#���-�5S��1����������+"��������2<(DD�)�

-+�#���"#���.����0� ��#�� ��������.��7(D2<9�"�G�����. ��*��#���#������#����� �����+"����"��#�"�����#����+�� #�#������E��#�"#��� ����������

!� 8���"����#��"#�������"���+����#��"#���-�5)�<��(��

5�������� ��"#���.����0� ��#�#��*"���#����7��T�9�#�����E��#�"#��� ����#�#��

�� 8���"����#��"#�������"���+����#��"#���)S<-5)����������+"��������5(2�

5�������� ��"#���.����0� ��#���#����������+"� ��#�����E��#������ "�"#������#"���+ ������"����"� �������+"���#���+"� �������"#�"��"#���.����0� ��#�#��#�#���#��������� "�"#������#"����� ���

%� 8���"����#��"#�������"���+����#��"#���)S<������������+"��������5(2�

5�������� ��"#���.����0� ��#���#����������+"� ��#�����E��#������ ���#"���+ ������"����"� �������+"���#���+"� ��������"#�"��"#��.����0� ��#�#��#�#���#��������� ���#"���+ ���

$�� 8���"����#��"#�������"���+����#��"#���)S��F������������+"��������5(2�

5�������� ��"#���.����0� ��#���#����������+"� ��#�����E��#����������� ���+ ������"����"� �������+"���#���+"� ��������"#�"�"#���.����0� ��#�#��#�#���#�������������� ���+ ���

$$� 8���"����#��"#�������"���+����#��"#���)S�)(�����������+"��������5(2�

5�������� ��"#���.����0� ��#���#����������+"� ��#�����E��#������#��*���+ ������"����"� �������+"���#���+"� ��������"#�"��"#��.����0� ��#�#��#�#���#���������#��*���+ ���

Manufacturing and Distribution Planning

OneWorld Xe (09/00)B–32

$�� 8���"����#��"#�������"���+����#��"#���)��S��1����������+"����������2��

��"���+�� #��� ���"�����#������� �����������+�������� ��#������E��#�����������#���#��� ���

$ � 8���"����#��"#�������"���+����#��"#���)��S��1����������+"��������58��

��"���+�� #��� ���"�����#������� �����������+�������� ��#������E��#�����������+��#�"����� ������� ���

$:� 8���"����#��"#�������"���+����#��"#���)��S��1����������+"��������2<��

��"���+�� #��� ���"�����#������� �����������+�������� ��#������E��#�������� ���"����� ������� ���

$4� 8���"����#��"#�������"���+����#��"#����F-2S��1����������+"���������2�

��"���+�� #��� ���"�����#������� �����������+�������� ��#������E��#��"���@��#�#�������#"���

$&� 8���"����#��"#�������"���+����#��"#����F-2S��1����������+"��������2)��

��"���+�� #��� ���"�����#������� �����������+�������� ��#������E��#��"���@��#��"�"#�������

$!� 8���"����#��"#�������"���+����#��"#����F-2S��1����������+"��������)��

��"���+�� #��� ���"�����#������� �����������+�������� ��#������E��#��"���@��#�#������#"����� ���

$�� 8���"����#��"#�������"���+����#��"#����;2S��1����������+"����������)�

��"���+�� #��� ���"�����#������� �����������+�������� ��#������E��#�����#����#��

$%� 8���"����#��"#�������"���+����#��"#����;2S��1����������+"���������>2�

��"���+�� #��� ���"�����#������� �����������+�������� ��#������E��#�����#�"#���#����

Appendix B: SynQuest Interface

OneWorld Xe (09/00) B–33

Setting Up Requirements for Resource Definition Export

>�����+"���������#��#����"#��+�#�� ������"�������� �.��"������� ���"����#���"#���"��#���-#���5�#������-#���6����02 ��#���� "��#"�������"�#�+������ �������"G������#�+���#���"#���.����0� ��#��-������� ���#��"�#�+����"�� ����.�"��"�+���#"����.��#��������������������������"�#"���������+ ���#��#�"������ ����#��*������ ���#����-��#������E��#5���+��#�"���5�������#����������� ����"�#�"�������"#���++��#"�"#����#��

�����#��������+"���#���������"�����"����#����#�������������##���#��������������#�#����." ��+���#�"� �������*�������#� "#�������#��#���#��������"#���@�"����#�"��#���E���#"#��2��+"� ��+��#���." ��+���#�"� ����� ��"��#���E���#"#��)�@�"���+"� ��+��#�����#� "#�

>�����+"�������#�"#���"����"�" ��+��"������������>�����+"���"#���"������ ����"����#���"#���������#�"#����� �������.�"��"�+���#"��������������"�#"����(+#��������+"���#�������#�"#���"��#���"����#����#������������##����#����#��." ��+���#�"� �����#� "#�����������#��D�#��#��#��������#�"#���#��#�������+"���"��#���"����#����#��������#�"����"�#� ����" �. ��"�����E��#������������##����#�����������#�"#���#������*������#� "#�����#����#����=��#�#�����*�����#�����E��#��#������E��#�#�����#���#"�� �����#��#�������#�"#���"��"#���#��.���

�������+�������������������������������&���

1���#���8���� ���#��������78��9��������8���� �;����+"���������

$� �����*��"#��;����+"���������72���:(9��#����:$�"��#���+� ��"��+"� �3

� 2����#�����

�� �����-�"��#���+� ��"���+"� ������� "�*�1"��3

� ;����+"��������

� � "�*�(���

:� ���;����+"������������ �#��#���.�##����+�#����"���������� �#��#��+� ��"����� ��3

� ����

� ���"�#"����$

� ���"�#"�����

Manufacturing and Distribution Planning

OneWorld Xe (09/00)B–34

E���3������� ����+�#���+"#�#��������#��"�����"�#"�����"���������������"�#�+���������"G��#������ �����������

����+� ��"������#��������#��*"���#����#��#�#���"�#�+������+"���"��#�������+"���������#�. ��"������� ��

� �<�C�#�� ������

� (��C�����"��������

� <6�C� �.�������

� �-�C�����#�"#��

�����������+"���#����#��*"���#���������������������"#���"��#���"����#���#����������#��������"�#������#��*"���#����#��"���#"+��#���"#������������������#�"#����������#������������������#�"#�������# ��"�#������E��#�5���+��#�"���5������"�#�+�������������������������#��+� ��"��3

� ("��"���#���� ���"���������+�#�������������#��K���C� �����L�#���*���������� ��������#�� ���"#���"���52�05)20�)2

� ("��"������"���#����������+����"#���#����K���C"��L������#����*��������� ��������#�"������"#��

� ("��"������"#��H�#"���.�"������#����K��"#C.���L������#����*��������� ���� �� �#��#����@�"��������"#�����"#��

� ("��"������"#��H�#��*"���#����#����K#��*��L������#����*��������� ���##�����#���"#���������� ��"#��

Appendix B: SynQuest Interface

OneWorld Xe (09/00) B–35

Launching Outbound Subsystem UBEs

����6�#���A�"�������������#���+� ��"��3

� ���#������"��� ��������.���������#���=��#����#� �+������#����#"���#����

� <�������#���������#��#���+�����#��#��+��#��#������E��#�55�

>��������#����#���6�#���A�"��������� ��� �����"#���#�.���.�"##���#�#��������;� �������=��"������#���+�" �������������#�����#�"�������� �������

������������������������7./�

1���#�����#���(��"�"#�#"������ ������78F%�$$9��������6�#���A�"���

$� �����*��"#��6�#���A�"���C�(��" �. ��A�"������#��)��:&��"��#��+� ��"���+"� ������� "�*�1"��3

� 6�#���(�� "��#"��

�� )���A�"���R������$�

Exporting Planned Orders to the SynQuest MM

�������� ����������������#�����E��#����+���#����=��#������5)2�"���� �#���

��&�����������������������D����,,

1���#���5�#�"� �2 ���"���(�����������������"�� �����#"��������78 :::9�������52�05)2�2 �����������=#��#"���+���=��#�

$� �����*��"#��6�#���A�"���C�(��" �. ��A�"����� ��#���"��R������$���=��#�2 ����������#�����E��#�

�� ������2���"�����#"���+���#���)��������

� � "�*�#���2����#�.�

:� �����$�"������"�����#"���$�

4� �������"������"�����#"�����

&� ������>DE;����"������"�����#"��� �

!� �����2�"������"�����#"���:�

�� ��#"���4�?�2�7����#�#��#��#�"��������#��#������E��#�2 ������#�#�9

Manufacturing and Distribution Planning

OneWorld Xe (09/00)B–36

2�"���#�#��#��#�"��������#��#������E��#�2 ������#�#��

%� � "�*��T�

�������������#�����+�� #���"���R������$�

Processing Options for Planned Order Extraction

Process

1. Enter a ’1’ to automatically ____________ attach Parts List and Routing data to the Planned Order. 2. Enter a ’1’ to export Planned ____________ Purchase Orders only; ’2’ to export Planned Work Orders only; or ’3’ to export both types of Planned Orders. 3. Enter the Vendor Name (UDC ____________ 00/VN) that will import the Planned Orders. If left blank, the UBE will end immediately. 4. Enter the Purchase Order Status ____________ that the system will use when exporting Planned Purchase Orders. (Required) 5. Enter the Work Order Status ____________ that the system will use when exporting Planned Work Orders. (Required)

SynQuest

Only one of the following parameters must be specified. If the Data Source Name is given, the Environment Name will be ignored. If the Data Source Name is left blank, the Environment Name must be supplied.

1. Enter the OneWorld Data Source ____________ Name where the SynQuest Exchange Repository resides. 2. Enter the OneWorld Environment ____________ Name which is configured to connect to the SynQuest Exchange Repository. 3. Enter a ’1’ to export Planned ____________ Orders using the Add Work Order transaction or ’2’ to export Planned Orders using the Add End Item Demand transaction.

Appendix B: SynQuest Interface

OneWorld Xe (09/00) B–37

Running Outbound Item Balances

1���#��������1 ���5��������#�-�#�����." "#�������78 $ $$9��������-#��6� ������=#��#"���

6�+���� ���"������������#�����E��#�55��"#��#�����#�����#���#���.��#���" �. ��@���#"#"��"������"����#����;��#�����+�� #�+��#�"��������#��6����02 ��#���#����7�#���#����#���5)2���#���9�#���� �� �#��"#������" �." "#��>����������#�"���������������������#����+���"�� �#"���"�����E��#�

-+��������#�#����������#�.�+�������#"������E��#�55�����A�"��R������$�7���+�����9����������A�"���R��������7+"�� �����9�#���������#���"����#���"�+���#"���#�����E��#�55�

Processing Options for Export Inventory Balances to SynQuest

Process 1

1. Enter a ’1’ to run this UBE in ____________ Final mode. If left blank, the UBE will run in Proof mode. 2. Enter a ’1’ to calculate ____________ nettable quantity based on Item Availability in Branch/Plant Constants. If left blank, nettable quantity is calculated using the following options. 3. Enter a ’1’ to reduce nettable ____________ quantity by the Safety Stock of the Item. 4. Enter a ’1’ to add Quantities ____________ in Transit to nettable quantity. 5. Enter a ’1’ to add Quantities ____________ in Inspection to nettable quantity. 6. Enter a ’1’ to add Quantities ____________ in User Defined Bucket 1 to nettable quantity. 7. Enter a ’1’ to add Quantities ____________ in User Defined Bucket 2 to nettable quantity. 8. Enter up to 5 Lot Hold Codes to ____________ include in nettable quantity calculations. Enter a “*” to add ALL held lots to nettable quantity. If left blank, no held lots will be added to nettable quantity.

Manufacturing and Distribution Planning

OneWorld Xe (09/00)B–38

Process 2

Only one of the following parameters must be specified. If the Data Source Name is given, the Environment Name will be ignored. If the Data Source Name is left blank, the Environment Name must be supplied.

1. Enter the OneWorld Data Source ____________ Name where the SynQuest Exchange Repository resides. 2. Enter the OneWorld Environment ____________ Name which is configured to connect to the SynQuest Exchange Repository.

Reviewing the Processing Log

1���#��������1 ���5��������#�-�#�����." "#�������78 $ $$9�������2���"���<����

1��#��*"����������������������*�#�������"��� ���#�������#��#�#��"�#�+��������������#��������"�#��#����#"���

���%��'���������������

Appendix B: SynQuest Interface

OneWorld Xe (09/00) B–39

$� �����*��"#��2���"���<�������� �#��#���+� ��"���+"� �3

� �����#"��

� ��������

�� ��#��D�"��#���+� ��"���+"� ������� "�*�1"��3

� 2�����

� A�"+��#��#�#���"�#�+������������ �#����#"���

�������3�(�K>L������#��#�#���"�#�+�����������+� ���"##�����#����#"���#�#������E��#��=�������)���"#�������E��#��"��#��/��#�#�"�#����#"�������#������#���"�#�+������#��#���#����#"���#��#����=����������"#����1��=��� ���"+�#���"�#�+�����=��#��������+�����.������ ��#�"�����#���#�#����������������#������ ����+"����"#�"�����E��#�55��#�������@��#�55��" �/��#�#�"������-��#�"��=��� �������� ������+� ����#����#����#"���#�#����=����������"#����.�#����E��#�55��/��#���"#�.������#���.������ ��#�"����#��="#�"�����E��#�

����� /&��������

2����� (��"��"��#��#����*������������+� ��������

#������#���.�#�������"����#����(+#�����������

.������*�������������"#�������� �����.������#��

#������#���.�#�������"���������

A� "���� ���+���� ���+#������3

� ;���������� �

$ 2������������������

1������� ���+#���3

�� �����#������������#��#������.���

����+� ���������

�++ �����#������������#��#��������#���#

.�����������

Manufacturing and Distribution Planning

OneWorld Xe (09/00)B–40

Index

Manufacturing and Distribution Planning

9–42 ����� ��R��7�%0��9To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

OneWorld Xe (9/00)

Index

A

(.��#���� "������� "����%'$

(����� �#������������" �. ��� ' :

(�#"�����������)2052�05)2��('$

(��"�����+��G�������#���������������

:':%

(��"�����+��G�������#������*������:'4$

(��"#"��� ��#���"�+���#"���+����!'�$

(��. �C#�C�������+"�"#"����$'�$

(�2

�� �� �#"����:'�

����#"����:'�%

(��" �. ��#�����"�������#"����:'�%

B

6�#���." �������#"���52���&'�

6�#���." ��+���#�"� ����"��"����&':

6�#�������"�������������+��#�"���

&'$

6" ��+���#�"� ��5)2��4'���4'!

6" ��+�5�#�"� �-�@�"�������"�����#"���

4' $

6" ��+���#�"� ���#�����#��������+ ���

:'�:

6" ��+�5�#�"� �)��""��������"��

��#"����&'&

6 ��*�#��������� "������� "����%'�

6 ��*�#������ �������� "������� "���

%'�

6 ��*�#��������������++��#"�����#�

������%'�

6�����)� �#"���"��)��""��������"��

��#"�����'$�

6������ �#"���"�����"��"�����'$�

C

�� �� �#"����#��������"#��+���"#"�� ���*

���#��� ':�

�� �� �#"��

���" �. ��#�����"���:'�

���� �#"������" �. ��#�����"���:'%

���"������" �. ���:'�

+����#�������#"����:'44

#"����"���:'!

����� "���"#��������������������:':&

�����"#��<���������"�����#"���� ' &

�����"#��5�����������������"��

��#"���� ' :

�����"#��2 ���"���5�����)��""���

����"�����#"���� ':�

�����"#���@�"����#��"� �����##"������

!':

�����"#���@�"����#�� ���"������"��"��

��*����#�� ����� '4&

�����"#��)�@�"����#�2 ���"���7�)29�

��+"�"#"����$'$!

�����"#���@�"����#�� ��

�����#"���� '4:

��"��"���+��5)2�� '44

�� "��#"���� '4%

�(�2���� �� �#"����:'%

� �������������#"��"���� ' %

� ��"����������:':%

��C�����.�C�����#����+"�"����!'$�

�����5���"���)��""��������"��

��#"����6'�!

�����5���"���)��""���+����6'�&

�����"�������"���+���#�" �+����#

����������+����#��'�����+"�"���#��

�"#".�#"����"������72:�%$9

���+"�����"#����&'�

#��+��������'$

���"���#"�����'$:

���� "��#��������������"����:':&

���#"���������"��������

����+��#�"����&'$:

Manufacturing and Distribution Planning

OneWorld Xe (9/00)

����"���� �������"#����'�����##"�����

��#�" �+����#

����"���������� �������"#����'��

��##"��������#�" �+����#M���##"�����

������+����#

���#"��� "�0"#���� �#"���"���!'�:

���#"����#����#���#"�� ���!'�!

���#"������#"#"�����#"����!'��

�"#"�� ���*����#����� �� �#"���52�� ����

':4

�)20)��2�2 ���"���)������#"���

����"�����#"���� '::

D

��#���=��#����#� �)��""���+����6'4

��#���=��#����#� ���##"�������6':

��#��� ��#"��

�����#"�������#������� ��+���

"#����:'$�

5)2��4'�

��+"�"�����C�����.�C�����#��!'$�

��+"�"��������� "����!'��

��+"�"�����������+" ������� ��� '�$

��+"�"����"����#���##����%'%

��+"�"������ "�����#��#�"�+���#"����%'4

��+"�"������ "�����#��#��%'4

��+"�"������ "��� "#������#�����%'$

��+"�"���#���#��*"���#����+��������

!'$&

�� �#������������"�����#�" ��

������+���� ':�

�� �#"�����#������� ���!'�!

�� �#"����������:' !

�������+����#"���� '�

���������##�����'$�

��#�" �+����#���'4

��#�" ���������"��

��#��������+ ����:'�:

�#"��"���� ������������ ' %

��#�" ������

�� �#"����:' !

+"=�������@���#"#���:':

��"��"����:' !

��"��"���+��5)2��4'$:

��*"����"#���:' &

��#��"�"������" �. �������"#��� '$$

��#��"�"��� ���C����� ����� '$%

�"��#������+��#�"����&'�

�"��#�������

��"��"����+���������@�"����#

� ���"���� ' $

��"��"���+�������"#���@�"����#

� ���"���� '4&

�"��#��� "#����"��"���5)2���*

����� ��� '4!

�"#".�#"����#����&'�

�)2

��#"����������('$

@���#"#��#�����:'��

�)2��52�������)��2���##"�������!'!

�)2052����#�" �5�����)��""���

����"�����#"����:' �

5)2����� � �����"����&'%

�)2052�05)2������"�����#"����:'$

��� "��#"�����#������� ���!'�!

E

�++��#"�����#������

. ��*�#�������������%'�

��� "������� ���%'�

���"������" �. ���� �� �#"����#"����"��

:'�

���"���C#�C�������+"�"#"����$'�$

��#��6" ��+�5�#�"� �-�+���#"���+���

:'&4

��#�0������������ ��+���72 : �$9��%'��

��#�"�����������"#������ ��� '$:

��#�"�����*����#��+��))2�� '4

����#��"�.�����������G"���6'�

�=��#�-����#���6� �����#�����E��#�

����"�����#"����6' !

�=��#"���2 ����������#�����E��#�

6' 4

F

1�#���#���������

��#�"� �� ���"����$'�%

���������������"#��� ���"����$'��

1��#���� �����������#������##"������

:'&:

1��#��

���������##�����'$�

Index

OneWorld Xe (9/00)

+����#�����������'$

+����#"�����'!

1"����*�����7'1��9��@���#"#��#���

+��5)2��4'$�

1"=�������@���#"#��71�E9����#�"

�������:':

1 �#�1" ����C)�+������+����6'$4

1 �#�+" ����C�+��������##"�������6'$:

1����#����������#�#"#"�� � �����'$

1����#����"���#"�����'$:

'�������(�����"=�6�'�1����#

�� �� �#"����=��� �

1����#�������#"������ #"+��" "#����' �

1����#�������#"����:'��

�.��#��:'4

��#�����#"���.��*�#��:'4:

� ���"�����"G���#"�����"����:'4:

1����#�������#"����� �� �#"����:'44

1����#�������#"�����"�����##"������

!'$�

1����#���""������#��������+ ����:'�:

1����#"��

�������� '�

+��#�����'!

1����#"��� ��� �������#������'�

1����#"�������"�����'4

1����#"����������'$:

1������#�0������������ ���%'��

1��

���"#"��� ��#���"�+���#"����!'�$

�����5���"���)��""����6'�&

��#���=��#����#� �)��""����6'4

��#��6" ��+�5�#�"� �-�+���#"����:'&4

1 �#�1" ����C)�+�������6'$4

-#���5�#��)��""����!'$!

<"��0"#���� �#"���"����""����!'�4

������#�" ��:'4�

������#�" �'�2����--��:'4�

)������2�+" ��)��""���� '��

A����������� ��5�#��)��""����%'!�

%'$�

��*����#��5�#��)��""���� '&

��*����#��)������;�"#�)��""���

'$4

��*��"#��6�#���A�"���'�(��" �. �

A�"����6' 4

��*��"#��6" ��+�5�#�"� ��:'&:��&'4

��*��"#��6�����)� �#"���"����'!

��*��"#��6�����)� �#"���"�

F"��������'$$

��*��"#����06�C2����#�2 ���"��

��. ���!'$�

��*��"#�������5���"����6'�&

��*��"#����#���=��#����#� ��6':

��*��"#����#�" �5������:': ��:'::�

4'$ ��&'$$��&'$!���'�%

��*��"#����#�" ��������&'�:

��*��"#��1 �#�1" ����C)�+������

6'$:

��*��"#��1����#�������#"��

)��""����!'$�

��*��"#��-�#���#"���A�"����6'�$

��*��"#��-#���6������!'�$

��*��"#��"#���.������!'$

��*��"#��-#���5�#��6�����!'$!

��*��"#��"#�����#��.�����!'$4

��*��"#��<���#"���6�5�-�@�"���4' $

��*��"#�� "��0"#���� �#"���"���!'�:

��*��"#��5���+��#�"�����*�����

:'4$

��*��"#������������ "����4'��

��*��"#��2���"���-�@�"���4'$!

��*��"#��2���"���<����6' %

��*��"#��)������2�+" ��)��""���

'�$

��*��"#��)������;�"#�� '$4

��*��"#��)��#"�������#"����!'��

��*��"#����� "��� "#������#����

%'$:

��*��"#������ ��������������4'$%

��*��"#������ �0�������-�� �"��

)� ���!'�

��*��"#���"�����"���&'$$��&'$&���'��

��*��"#��#"����"���&'�

��*��"#������������� ����#���%'&

��*��"#����*����#��� '4

1��G������

���"���#������*������:'4$

���"���#��������������:':%

1��G��+������:'4

1�G��������5)2��4'�

Manufacturing and Distribution Planning

OneWorld Xe (9/00)

G

8����#������ "�������� ��)���#�

����"�����#"����%'$�

8����#"��

�)2�� '4:

'�������8����#"���5)2M���##"�����

����������������"�� �"���� �

��#������� ��+��� �"#����:'$�

��#������� ��+��� ��#���"#����:'�&

8����#"�������#������� ��+��� �"#���

:'$�

��#��� ��#"����:'$�

��#���@�������:'$�

8����#"�����"�� �� ��� ���#������� �

��#��������+ ������#� ��:'�4

��#��������+ �������#���:'�4

8����#"�������� "������� ���5)2

�������%'$!

8����#"��������"#���@�"����#�� ���

'4:

8����#"�����#�"� ��@�"����#�� ���

4'!

8����#"���52��+��.�#���." ��&'�

8����#"���52��+��#��������"���#��

&'$4

8����#"����� #"C+��" "#��� �����'$

8����#"���� ���"���." �+����#��'��

��#�"������ ���"���."

8����#"����������@�"����#�� ���

'�4

8����#"�����������"#���#���#"�� ��

'$$

8����#"����������#������"#��� ���� ':�

8����#"���"�� �� ��� ���#������� ��

:'$$

8����#"������ "������� ���%'$!

8����#"���#�����������+" �

��#���#"�� ��� '$%

8����#"���#�����5)2��4'�

8���"����#��-#���5���"��������"��

��#"����6' �

8���"�

�)2�������������"#����:'�

�=� ��"���� �����������:'&

52����������+��#����"#����:'

52������5)2��4':

��#�����#"���.��*�#��:'4:

� ���"���." ��:'&�

��������+" �������++��#"�"#����#��

'��

#"���+������:'4

H

F� �����������"�����#�" ������

+���� ':�

I

-�.������������6'�

-�.�����������"G������#��6'�

-�� �"���� ������ ��������������!'!

-�#�� ��#�� �#"���"����'$

-����#�����/�#���#����#��������+ ���

:'�

-����#���#��+�����#��������+ ����:'�

-#���5�#��)��""���+����!'$!

L

<�����"�����#.�������.�#���;6��

6' 4

<���#"������"��"���+��5)2��4' $

<���#"���� ������#��������+ ����:'�:

<��� �������#������'�

.�#�+"#���'�

�� �� �#��������#����� �#�������'%

�=�����#"� ����#�"�����'$$���'$�

+ �=". ����#������'$$

�����#"�� ����"��#������"����������

�'$$

�#�����#��#�"�������'%

"��������="��#"�����'$�

��#������'%

���"������������'$�

�����#����� �#�������'%

����������������="��#"�����'$�

��"��#������"������������'$$

<"��0"#���� �#"���"������#"����!'�:

<"��0-#���)� �#"���"��)��""���+���

!'�4

<�������"��"����#������� ���&'�:

<��������+" ��� ' :

Index

OneWorld Xe (9/00)

<���C����������"#��� ���� '

<��� ��� �������5)2��4'!

M

5�/��#�. ����'��

5�*�C#�C�������+"�"#"����$'�$

5�*�C#�C#��*����+"�"#"����$'�$

5���+��#�"��

�"��#���&'�

�"#".�#"����#����&'�

5���+��#�"��������"#".�#"���� ���"��

�#���"�#���#"����$'$�

#�������������#��$'�$

5���+��#�"�����#����""������#�������

+ ����:'�:

5���+��#�"��������� "�����*.�����

����"�����#"����4' �

5���"�����##"������;����6'�4

5�#�������#"�������� ��������#"���+�

���#"#"���"#����&'��

5�#������� �

�����#"���+��� �"#����:'$�

�����#"���+��� ��#���"#����:'�&

5�#������� ��+��� �"#���������#"���

:'$$

5�#������� "��

�� #"C ��� ��:'&$

"�� �� ��� ��:'$

5�#�"� �� ���"����+�#���#����������

$'�%

5�#�"� �� ���"�������#"��������"���

$'$�

5��������"����$'�!

5���������"����$'�!

5�������#�" ����"��"���� ' �

5������"� ���+������:'4

5�����#������##"�������!':

5������������������#�����#�������

+ ����:'�:

5����

� ��"����:':%

�� �#���� ':�

�� �#"����:' !

�)2052�05)2��('$

�� ��� ':�

"�.������6'�

� ��"�������� ���:':�

������"������� "��#"����:':&

����"�����#���#"�� ���:':�

����"���+��������������:':

����"���+����*������:':�

�#"��"���� ������ ' %

��*"����"#���:' &

5�����+��5)2����*"����"#���4'$

52�

��#"����������('$

�����#"���+��.�#���." ��&'�

�����#"���+��#��������"���#���&'$4

@���#"#��#�����:'�%

��"��"���.�#�����#��#��&'$�

��"��"����������#��#��&'$4

��"��"������#"#"�����#��#��&'�$

52������5)2���"++�������4'

52�� ����� ':

�� �� �#"���+���"#"�� ���*����#��� ':4

52�0�)205)2����� � �����"����:'&&

5)2

." ��+���#�"� ��4'!

��#��� ��#"����4'�

+�G��������4'�

�����#"���#�����4'�

��� ��� �������4'!

��� � �����"����4'�

2�� � �����"����5)2��&'$4���'$ ��%'$!�

%' $

5)2

'�������5�#�"� ��@�"����#�� ���"��

��#"����������('$

"���#��4'$

��#��#��4'�

����"�����*������������4'$&

���"����++��#"�� ���4'4

5)2�����52����"++�������4'

5)2���#�" ����������"��"����4'$:

5)2�������������#"�������� "�

����� ���%'$!

5)2��#������� ��������*����� ����

��"��"���� '4�

5)2���� ����������������"��"����4'$�

5)2�#"����"�����"��"����4'$$

5� #"+��" "#���+����#�������#"�����' �

5� #"+��" "#���)2052�05)2�7) :� 9�

����"�����#"�����'$:

5� #"C+��" "#��� ���"�����##"��������'4

5� #"C+��" "#��� ���������#"�����'$

Manufacturing and Distribution Planning

OneWorld Xe (9/00)

5� #"C+��" "#��#"����"�����"��"�����'�!

5� #"C ��� ���#������� �

�##"��������#��*"���#�����!'$:

�##"������������ "���� ���!'$

5� #"C ��� ���#������� "����� ���"��

." ��:'&$

N

D���#"���(�20(�2;��:'�%

D�#�����������"��"���"#����:'�

D�#��������+ ��

." ��+���#�"� ���#���:'�:

��#�" ���������"����:'�:

+����#���""����:'�:

"����#�����/�#���#��:'�

"����#���#��+���:'�

���#"���� ����:'�:

����+��#�"�����#����""����:'�:

�������������������#���:'�:

��#����������"����:'�:

�������������#���:'�:

���#������@���#"#"���:'�:

� ��������#���:'�:

��*�������#���:'�

��*�����"����#������� �#"����:'�

��*�����"����#���"����:'�

D�#��������+ ������#� ��"�� �� ��� ���#�

����� ���:'�

D�#��������+ �������#���"�� �� ��� ���#�

����� ���:'�4

D�#��������)��"��������"�����#"���

:'�&

D�#����������"������#��������+ ����:'�:

O

����#"����"��#���-�@�"�������"��

��#"���� ':%

������#�" �'�2����--�+����:'4�

������#�" �+����:'4�

������ "���� ����##"�������!'$�

����#�#�����*������������:':

��#.�����"#���.� ������6' !

��#.������.�#���;6���6' 4

��� ������#"���+����� ��� "���� '4�

����"����+����#"�����'4

P

5)2����� � �����"����&'$4���'$ ��%'$!�

%' $

2�� � �����"��

5)2��&'%

52�0�)20522��:'&&

5)2��4'�

����#���"�����'�$

2�#� "#���""����:'�

2�#� "#��.#"#�#���:'�

2�#�����#"���.��*�#��+����#

������#"����:'4:

2���"�������������"��"����4'$!

2���"���-�@�"�������"�����#"����4'$�

2����#������������ ' :

2����#�����+��#���� �������:'&:

2�"�������"�

��"��"���� ' &

��"��"���+���)2�� '4!

��"��"���+��)��2�� ':&

2�"���������������"�����#"���� ' �

2 ��"�������������� ���:':�

2 ����������7O2<�9��@���#"#��#����+�

5)2��4'$�

2 �����������=#��#"��������"��

��#"����6' &

2 ���������

�=� ��"����:'&�

�=��#"���#�����E��#��6' 4

2 ��������*�����7'2<�9��@���#"#��#���

+��5)2��4'$�

2 ���"���." �+����#���'4

2 ���"���." ���� #"C ��� ���#�

����� "����:'&$

2 ���"���+��" "�����"��"���+��5)2��4'$�

2 ���"���+��" �������"���������+��

:':!

2 ���"���+������:'4

2 ���"�����"G���#"�����"����+����#

������#"����:'4:

2 ��#�����+��#�"�����#��+���72:$��!9�

!'$

2"��� ����� ' :

2"�#"�������� "������� ���%' $

Index

OneWorld Xe (9/00)

2����"���#��������#"���52���&'$4

2��������+��#�"��

.�#�������"����&'$

���#"���������"����&'$:

2���"��� ������"��"����6' �

2���"����������+����� ���"���+��" ��

:':!

2���"�����������#���#"�� ���:':�

2���"����� #"C+��" "#��#��+�����

��������'��

2���"�����#"�����)20)��2�2 ���"��

)������#"���� '::

2���"�����#"��

6" ��+�5�#�"� �-�@�"���4' $

6" ��+�5�#�"� �)��""����&'&

6�����)� �#"���"��)��""�����'$�

�����"#��<����� ' &

�����"#��5������������� ' :

�����"#��2 ���"���5�����)��""���

':�

�����5���"���)��""����6'�!

�)2052����#�" �5�����)��""����:' �

�)2052���"�����"���:' �

�)2052�05)2��:'$

�=��#�-����#���6� �����#�����E��#�

6' !

8����#������ "�������� ��)���#��%'$�

8���"����#��-#���5���"����6' �

5���+��#�"��������� "�����*.�����

4' �

5� #"+��" "#���)2052�05)2�7) :� 9���'$:

D�#��������)��"����:'�&

����#"����"��#���-�@�"��� ':%

2���"���-�@�"���4'$�

2�"����������� ' �

2 �����������=#��#"����6' &

)�+���)������;�"#�� '$�

)������2�+" ��)������#"���� '�$

)������)�@�"����#�2 ���"���� '�!

�##"������+�����E��#��6'��

���� "�������� ��2"�#��%' $

���� "�������� ��)� ����8����#"���

%'��

���� "�������� ��)��""����%'�:

���� �������������-�@�"���4'$%

���� �0�������-�� �"���)� ���!'$�

A����������� ��5�#��)��""����%'%

��*����#��)������;�"#�� '$!

��*����#�������� ��)��"���� '4�

��*�����8����#"����:'4!

2���"��������:'4!

2���"�������+��5)2��4':$

2���"��������������������+�

5)2��4'$&

2���"������"�#����� "������� "���

%'4

2���"�����*������������:':�

2���"�����*�����������+��5)2�

4'$&

2���"�����*������:'4!

2���������-�

2 : �$�7��#�0������������ �9��%'��

2:$��!�7� ��#�����+��#�"�����#�9��!'$

2��������������"���+��G�������#���:':%

2������������#�����#��������+ ����:'�:

2����������������+��5)2�

����"����4'$&

2���������

����� "���"#����:':&

����"����������:':

Q

E���#"#��#���

�)2��:'��

�)2�����52���:'�!

52���:'�%

E���#"#��#����+��5)2

+"����*�����7'1��9��4'$�

� ����������7O2<�9��4'$�

� ��������*�����7'2<�9��4'$�

��*�����7O��9��4'$�

R

)�#������� �

�� �#"����!'�!

��� "��#"����!'�!

��"+�"����!'�&

)�#��������"#����� �� �#"���+���"#"�� ���*

���#��� ':�

)�#�����+" ��� ' :

)�#������#"�����#���#"�� ���!'�!

)��2

��"��"�����"�������"��� ':&

��*����#�� �������"��"���� ':4

Manufacturing and Distribution Planning

OneWorld Xe (9/00)

)�+���)������;�"#������"�����#"���

'$�

)� ��"�������� "������� ���%'�!

)���#"#"������"��"���52����#��#��&'�$

)���#"#"���"#���������#"�������#�

�����#"�������� ���&'��

)���#"#"�������+��#�"������+"�"������

�� "����!'��

)���#"#"�����#"������"+�"����!'��

)���#������@���#"#"�����#��������+ ���

:'�:

)���������������"#��� ���"��

+�#���#�����������$'��

����"����$'$!

)���������" �. ��� ' :

)��������+"�"#"����=��#���##"�������6'

)�������++�#�� ' 4

)��������+" �

��+"�"�������� ��� '�$

�����#"�����#���#"�� ��� '$%

)������2�+" ��71 � 9�� ' 4

)������2�+" ��)������#"��������"��

��#"���� '�$

)������2�+" ��)��""���+���� '��

)��������+" ��������#"�����#���#"�� ��

'$%

)�������@�"����#��"� �����##"������

!'

)������)�@�"����#�2 ���"���

����"�����#"���� '�!

)�������@�"����#�� ���"���7))29

��+"�"#"����$'$!

���C����������"#��� ���"���� '

��"��"����"��#��������� ' $

)�������@�"����#�� ������ "��#"���

':�

)��������"#�� ':�

�� �� �#"���� '$�

��#�"�������� ��� '$:

�����#"�����#���#"�� ��� '$$

)��"��"��

�"��#��������� '4&

�"��#��������+���)2��'���)��"��"��

�"��#�������

5)2��#������� ��������*����� ����

'���2���"�����#"���+������� �

��"��

5)2��#������� ��������*����

����� '4�

��"�������"��+���)2��'���)��"��"��

��*����#�� ���

��*����#�� ����� ' 4

��*����#�� ����+���)2�� '4&

'�������)��"��"�����*����#�� ���

)��"��"���.�#���." ��+���#�"� ��&':

)��"��"���.�#�����#��#�+���52���&'$�

)��"��"���.������ �#"���"����'$�

)��"��"��������"#���@�"����#�� ���

'44

)��"��"�����#�" ��������:' !

)��"��"����"��#��������+��))2�� ' $

)��"��"����)2052���"�����"���:'�!

)��"��"���"#��� ���#"���������'��

��+"�"���#����"#".�#"����"������72:�%$9

)��"��"���"#���+����#������� �

� ��#"����:'�4

)��"��"���"#���+����#���������:'�

)��"��"��� ���#"���+��5)2��4' $

)��"��"���5�������#�" �� ' �

)��"��"���5)2�����"�����������4'$!

)��"��"���5)2��#������� ��������*

���� ����� '4�

)��"��"���5)2���� ��������������4'$�

)��"��"���5)2�#"����"���4'$$

)��"��"���5)2���*������ �����#��

�"��#��� "#�� '4!

)��"��"����� #"C+��" "#��#"����"����'�!

)��"��"�����"�������"��� ' &

)��"��"�����"�������"��+���)2�� '4!

)��"��"�����"�������"��+��)��2�

':&

)��"��"���� ���"���+��" "��+��5)2��4'$�

)��"��"����������#��#�+���52�

�����#"����&'$4

)��"��"����#������� ��������*����#�

����� ':%

)��"��"����#������� �� �����&'�:

)��"��"������#"#"�����#��#�+���52���&'�$

)��"��"����������@�"����#�� ���

' $

)��"��"�������+ �����*.�����+��5)2�

4'��

)��"��"���#���2���"���<����6' �

)��"��"�����*����#�� ����+���)2�� '4&

)��"��"�����*����#�� ����+��)��2�� ':4

)��"��"�����*����#�� ����+��))2�� ' :

)��"��"�����*������ ��+�������#"��

#�#��� ':�

Index

OneWorld Xe (9/00)

)��""�������"���+�+����#��'��

8����#"�������"���+���#�" �+����#M

8����#"���������+����#

)��""���#���������+����#��'���)��""��

������+����#��"���#���1����������

�����

)�������#������"#���"� �����##"�������!':

)�������#������"#��� ���"���7)��29�

��+"�"#"����$'$!

)�������#������"#��� ���������#"���� ':�

)���"�����#.�����-#���6� ������6' !

S

�� ��������#�����#��������+ ����:'�:

������ �������#"����=���#"������#�

��"��"����%'$!

��##"���������������+"�"#"����=��#��6'

��##"��������#��*"���#������� #"C ���

��#������� ���!'$:

��##"��������#���=��#����#� ��6':

��##"������+��#���� �����������#����

:'&:

��##"������+ �#�+" ����'�+�������6'$:

��##"������+����#�������#"�����"���

!'$�

��##"������������#����+���)2��52��

5)2������)��2��!':

��##"�������� #"C+��" "#��� ���"�����'4

��##"������������ "���� ���!'$���!'$

��##"����������"�����#"����+�

���E��#��6'�$

��##"������#��*"���#�����!'$:

��##"������������+����#��'�����##"��

�����#�" �+����#M��������+����#

��##"��������� �������������"�� �"��

� ���!'!

��##"��������� ������������

� �#"���"����'4

��##"������#��������"#���@�"����#

�"� ����!':

��##"������#���� ���"����#����!'!

��##"������#����������@�"����#

�"� ����!':

��##"������#����������#������"#���"� ���

!':

��##"������#"���+������ ��+���)2����

52���!'4

��##"���;��;���5���"����6'�&

��##"��������"#�#�����!':

��"����#���##������+"�"����%'%

�����+ �����*.��������"��"���+��5)2�

4'��

�"�� �� ��� ���#������� �

��#��������+ ������#� ��:'�

��#��������+ �������#���:'�4

�"�� �� ��� ���#������� "��

��� "��#"����:'�

�)2�������������"#����:'�

52����������+��#����"#����:'

#"���+������:'4

�#�#"#"�� � ����+����#�����������'$

�#���+�����#"�������� "������� ���%'�

�#��*"���#�������+"�"���+������

����+��#�"����!'$&

�#��*"���#������##"�������!'$:

�������+����#���'4

���� "�����#��#�"�+���#"������+"�"����%'4

���� "������� �

���#"����%'�

�++��#"�����#��������%'�

���� "������� ����#��71: �$9��#�. ��

$'�!

���� "�������� ��2"�#������"�����#"���

%' $

���� "�������� ��)� ����8����#"���

����"�����#"����%'��

���� "�������� ��)��""��������"��

��#"����%'�:

���� "������� "��

. ��*�#������%'�

. ��*�#������ �����%'�

�� #"� ���%'$!

����"������"�#��%'4

���� "��� "#������#�������+"�"����%'$

���� "��� "#������#����71: �$$9��#�. ��

$'�!

���� ����������������"��"���+��5)2�

4'$�

���� �������������"�� �"���� ����##"��

����!'!

���� �������������-�@�"�������"��

��#"����4'$%

���� �������������� �#"���"�

�++��#"�"#����#����'&

"����#������" �." "#����'&

��*�����'&

�##"��������'4���'!

Manufacturing and Distribution Planning

OneWorld Xe (9/00)

���� �0�������-�� �"���)� �������"��

��#"����!'$�

���E��#��6'$

��#���"�#���#"��

�"#".�#"���������� ���"�����'&

����+��#�"��������"#".�#"���� ���"���

$'$�

��#�������#"�������� ����'&

��#�"� ��@�"����#�� ���"�����'&

�������@�"����#�� ���"�����'&

T

��. ���$'�4

(����6��*���'��

6����02 ��#�5�#����'��

6�"���;�"#�5�#����'��

��#�" �1����#���'��

1����#����������*���'��

-#���5�#����'��

)������2�+" ��71 � 9�� ' 4

�� ��F"#�����'��

�� ��������#�" ���'��

����������#��#���'��

�������1����#���'��

��� "������� ����#��71: �$9��$'�!

��� "��� "#������#����71: �$$9��$'�!

��������������#������+��#�"������

�"#".�#"���� ���"����$'�$

�"���.��*�#����#������+����#

������#"����:'4:

�"���+������ ���:'&

�##"�������!'4

�"���+������:'4

+��G��+������:'4

�������"� ���+������:'4

� ���"���+������:'4

"�� �� ��� ���#������� "����:'4

�"���+����� ��� "������ ����� '4�

�"����"�

���" �. ��#�����"���� �� �#"����:'�

���� �#"������" �. ��#�����"�

�� �� �#"����:'%

���"������" �. ���� �� �#"����:'�

+����#�������#"����� �� �#"����:'44

�� #"C+��" "#����'�!

��"��"���+��5)2��4'$$

�"����"���� �� �#"����:'!

���+�����������������"�����'��

���+����������+"�����"#�����'$

U

;�������"�����##"�������6'�4

;���#���"��������+"����������!'

;�"#�#������##"�������!'

V

A� "��#"�����#������� ��� ':$

A� "��#"�����#�"� ��@�"����#�� ���

'4 ��4' %

A� "��#"����������@�"����#�� ���

':�

A� "��#"���#��������"#���@�"����#�� ���

'4%

A����������� ��5�#��)��""���

����"�����#"����%'%

A����������� ��5�#��)��""���+���

%'!��%'$�

A�"+�"����#������� ���!'�&

A�"+�"������#"#"�����#"����!'��

W

���#����� ���"���." B��:'&$

���#����#���#"����"���� �� �#"��B��:'!

���#����#"���+������ �B��:'&

��*����#������� ':�

��*����#�� ���

��"��"����+��))2�� ' :

��"��"���+���)2�� '4&

��"��"���+��)��2�� ':4

��*����#��5�#��)��""���+���� '&

��*����#��)������;�"#������"��

��#"���� '$!

��*����#�������� ��)��"��������"��

��#"���� '4�

��*����#��;�"#�)������)��""���+���

'$4

��*����#�

����� ':�

��"���#��"�� ����"���)2�� '�&

Index

OneWorld Xe (9/00)

��*����

���"���+��G�������#���:'4$

+�G����5)2��4'�

��*�����7O��9��@���#"#��#����+��5)2�

4'$�

��*�������#�����#��������+ ����:'�

��*�����8����#"��������"��

��#"����:'4!

��*�����"����#������� �#"������#

�������+ ����:'�

��*�����"����#���"������#�������

+ ����:'�

��*����������

����#�#���:':

����"���+����#�"� ��@�"����#

� ����4'$&

��*����������"����������:':�

��*������ �����"��"���+�������#"��

#�#��� ':�

��*��"#��6�#���A�"���'�(��" �. �

A�"���+����6' 4

��*��"#��6" ��+�5�#�"� �+����:'&:��&'4

��*��"#��6�����)� �#"���"��+�����'!

��*��"#��6�����)� �#"���"��F"�����

+�����'$$

��*��"#����06�C2����#�2 ���"�����. �

+����!'$�

��*��"#�������5���"���+����6'�&

��*��"#����#���=��#����#� �+����6':

��*��"#����#�" �5�����+����&'�:

��*��"#����#�" �5�����+����:': �

:'::��4'$ ��&'$$��&'$!���'�%

��*��"#��1 �#�1" ����C)�+������+���

6'$:

��*��"#��1����#�������#"���)��""��

+����!'$�

��*��"#��-�#���#"���A�"���+����6'�$

��*��"#��-#���6�����+����!'�$

��*��"#��-#���5�#��6����+����!'$!

��*��"#��"#�����#��.����+��

72:$�$9��!'$4

��*��"#��<���#"���6�5�-�@�"��+���

4' $

��*��"#��<"��0-#���)� �#"���"�

)��""���+����!'�:

��*��"#��5���+��#�"�����*�����

:'4$

��*��"#������������ "���+����4'��

��*��"#��2���"���-�@�"��+����4'$!

��*��"#��2���"���<���+����6' %

��*��"#��)������2�+" ��)��""���+���

'�$

��*��"#��)������;�"#�+���� '$4

��*��"#��)��#"�������#"���+����!'��

��*��"#����� "��� "#������#����+���

%'$:

��*��"#������ �������������+����4'$%

��*��"#������ �0�������-�� �"���)� �

+����!'�

��*��"#���"�����"��+����&'�

��*��"#���"�����"��+����&'$$��&'$&�

�'��

��*��"#������������� ����#��+���

%'&

��*��"#����*����#��+���� '4

��*"����"#��.�#���� ���"����&'

��*"����"#���)2052����#��#��:' 4

��*"����"#����#�"� ��@�"����#�� ���

4'$$

��*"����"#���������:' &

��*"����"#��������+��5)2��4'$

��*"����"#���� #"C+��" "#��� �����'�!

��*"����"#���� #"C ��� ���#������� ��

:'&4

��*"����"#�������� ���"����&'$

��*"����"#�����#"#"���� ���"����&'$%

��*"����"#������� "���"�+���#"����4'$&

Manufacturing and Distribution Planning

OneWorld Xe (9/00)

Recommended