View
1
Download
0
Category
Preview:
Citation preview
ENGINEERED PRODUCTS
Peristaltic pumps deliver more than you expect
CT13CT13 — a versatile pump for corrosive environments.Like all Pulsafeeder ChemTuff® peristaltic pumps, the CT13 is ideally suited for corrosive chemicals used in water and wastewater treatment, petrochemical and mining industries — including Sodium Hypochlorite, Ferric Chloride, Sodium Hydroxide and Hydrofluosilisic Acid.
PeriFlo® ChemTuff® Series
Simple operating design The simple design of a PeriFlo® pump results in a pump that is valveless and sealless (creating a gentle pumping action), has reversible rotation, high suction lift, higher solids content handing ability and easy maintenance.
Variety of MediaThanks to its gentle pumping action, a peristaltic pump can handle a variety of media where other technologies are unsuccessful, including chemicals, slurries, viscous, abrasive or shear sensitive media such as polymers.
Pump Longer The simple design means there are no valves to change and no seals to replace. The hose or tube element is the common wear part and is easy to replace. This means less down-time, less spare parts inventory and more pumping.
Flowto 47 gph (178 lph)
Pressureto 115 psi (7.9 bar)
TemperatureProduct to 176° F (80° C)Ambient to 104° F (40° C)
ApplicationsMetering, batching, transfer and sampling
10.7272.6
10.0253.3
8.9225.0
.512.7
3/8" NPT
10.0254.8
4.3109.0
4.1103.0
2.153.3
4.1105.3
17.4441.3
9.0228.6
11.5292.7
14.5[367.5] (LOW SPEED)
3.383.4
2X 6.3160.3
2X 8.9225.4
3X 8.0204.0
CLEARANCE FORM10 BOLTS
CT10CT13
(HIGH SPEED)
85.280
60
40
20
00 10 20 47.56
Sp
eed
RP
M(b
ased
on
1725
RP
M m
otor
)
Flow GPH30 40
30 PSI / 85.2 RPM60 PSI / 67.4 RPM 60 PSI / 85.2 RPM115 PSI / 42.8 RPM 115 PSI / 67.4 RPM
Note: Continuous Duty = run time greater than 2 hoursIntermittent Duty = run time less than 2 hours with a 1 hour rest period between run times
Max Pressure/RPMfor Continuous Duty Cycle
Intermittent Duty Cycle
Flow vs. RPM
Measurements: in [mm]
ENGINEERED PRODUCTS
Pulsafeeder Engineered ProductsA Unit of IDEX Corporation2883 Brighton Henrietta TL Rd • Rochester, NY 14623Phone: +1 (585) 292-8000 • pulsa@idexcorp.compulsa.com
© Copyright 2014 Pulsafeeder. All Rights Reserved. Delrin® is registered trademark of E.I. DuPont Company. Halar® is a registered trademark of Solvay Solexis. Nylatron® is a registered trade name of Quadrant EPP. PFCT13spec_Rev0314
Spec Pulsafeeder. Get more than you expect.
PerformanceSpecifications
Features & Benefits
Materials of Construction
Drives & Accessories
Dimensions
Max capacity 0.009 gal/rev
Max flow rate 47 gph (178 lph)
Connections 3/8" MNPT, 3/4" Camlock
Compressor Rollers
Max tube pressure 30 psi (2 bar)
Max hose pressure 115 psi (7.9 bar)
• Chemical resistant Halar® coating• Non-metallic rotor and rollers• Shimless design • Sealless and Valveless• Close coupled• Abrasion resistant• Dry-run capable• Self priming to 27 ft.• Reversible rotation• Easy maintenance
• Variable speed controls with industry standard I/O’s
• Tube/Hose leak detection • Pulsation dampeners • Suction accumulators• Pressure relief valves
Hose: Natural rubber, Buna, EPDMTube: NorpreneConnections: Male NPT: PVC or
stainless steel as standard; Optional: Male NPT PVDF or Camlock PVC
Casing: Halar® coated aluminumRotor: Delrin®
Rollers: Nylatron®
Hardware: Stainless steel
PeriFlo® CT13
CT13 Weight (with standard motor): 56 lbs.
Top View
Side View
Front view
Recommended