View
3
Download
0
Category
Preview:
Citation preview
2.5kW CO2 Laser
Engineered For Step One Laser Processing
U.S. MANUFACTURED
AMNC/PC Control
• Network ready, touch-screen control with intuitivegraphic display.
• Maintenance scheduler with e-mail notification jobs in progress and alerts.
• Complete cutting library.
• Quick and easy control of feed, power, duty cycle, frequency, gas selection and pressure control.
• B-axis focal adjustment eliminates time-consuming manual adjustment.
• Cutting head movement selection.
• Compact flash drive instead of hard drive improves hardware reliability in a shop environment.
Step One Laser Processing2.5kW, FOMII 3015 NT
The FOMII 3015 NT was developed at our manufacturing facility in Brea, California. It was designed after listen-ing to customers who required a 2.5kW laser and refused to com-promise cut quality, machine accuracy, and machine expandability. Fabricators also wanted the ability to add automation later and not be forced to trade-up to another laser, thereby increasing their capital investment.
Fanuc Laser Resonator
The specially tuned AF2000i-C LU2.5 is designed specifically for Amada. Its improved mode stability, faster response time, and reduced M2 value (higher beam quality) are unique to Amada lasers. This resonator provides a continuous wave output of 2.5kW and pulses up to 2.7kW.
Sectionalized Dust Collection System
A CNC controlled damper and plenum system under the cutting area provides superior dust and smoke extraction. This system assures consistent, high-speed cutting and excellent part quality. The system is designed to operate in zones, so the dampers are open directly beneath the area where the cutting head is, while the dampers elsewhere remain closed. The machine enclosure, with telescoping doors, further helps to keep dust and particulate in the cutting area for more efficient removal.
A dust collector is provided to col-lect the fumes and air borne particulate matter created by the cutting process – essential for effective and safe operation of a laser-cutting machine.
• 2.5kWResonator
• Solid,SinglePieceCastFrame
• High-SpeedCuttingHead
• QuickChangeNozzleand Focus Lens
• NozzleCleanerand Calibration Plate
• PowerSaveFunction
• AMNC-FPCControl
• UpgradabletoaFullShuttle Table (Retrofit or with Purchase)
• AllAutomationOptionsare Retrofittable
Key Benefits
Brea Laser Manufacturing Facility
Three Steps For Maximizing Production.The FOMII 3015 NT is specifically engineered to expand your capabilities
quickly and easily. A high-speed shuttle table can be added at any time as your production needs change. Then, to take productivity to the next level, Amada’s
advanced automation systems can be customized to your specific needs.
Advanced Cutting Technologies
CleanCut™ provides a high quality, oxide-free, weld-ready edge for mild steel, stainless steel, aluminum, and titanium. CleanCut™ utilizes a high-pressure inert assist gas (typically nitrogen) to prevent oxidation of the cut edge.
AirCut™ uses clean dry and filtered air to process mild steel, alu-minum and stainless steel if the application permits. Using AirCut™ can increase cutting speeds by as much as 50% over standard cutting with oxygen.
HS-2010 High-Speed Cutting Head
Features and Benefits:• Cartridge-style focus lenses can be removed and replaced without any tools.• Lens burn detection to stop the machine and alert the operator of any
possible burn damage to the cutting lens.• Auto-focus control (B-axis).• The automatic nozzle cleaner will clean the nozzle head on command
by the operator or as part of a set cycle time.
Power Save Function
The Power Save Function on the FOMII 3015 NT can save over 60% of the energy consumed during idle. The machine recognizes non-movement of the cutting head and begins a preset countdown. Once the countdown is complete, the laser drops into an initial power save mode. A secondary countdown then begins. Once that’s complete, the laser then drops into a full Eco mode. When cutting is ready to resume, the laser begins instantly from the initial power save mode and approximately 40 seconds from the Eco mode.
Nozzle CleanerCartridge Focus Lens (blue)
Step Two
High-Speed Shuttle TableThe high-speed shuttle table design improves overall machine utilization by externalizing the material setup process. The ability to switch tables at high speed, ensures faster spark-to-spark times while greatly increasing machine utilization. Each table incorporates manual clamps so that materials of different thicknesses can be secured to the table.
AutomationThe FOMII 3015 NT allows for complete expansion into a fully automated laser cell. The laser machine includes all of the necessary wiring to connect automation modules. All of Amada’s laser automation solutions are compatible.
AMS Gantry
AMS 10-Shelf System
Step Three
7025 Firestone Boulevard • Buena Park, CA 90621 • (714) 739-2111 • FAX (714) 670-8020 • www.amada.com
Amada America, Inc.
Specifications
FOMII 3015 NT
Motion Package 121" x 61" Table
Laser Resonator AF2000i-CLU 2.5
CNC Controller AMNC-F
Chiller Orion or Equivalent
Dust Collector Torrit, Farr or Suitable Equivalent
Gas Kit Laser and Assist Gas Connection Kit
Motion System
Travel Method Stationary Table, X, Y and Z Axis
Control Method X, Y and Z Simultaneous 3-Axis Control
Drive Motors FANUC AC Servo Motors
Maximum Sheet Size 60" (Y) x 120" (X)
Maximum Axis Travel 61" (Y) x 121" (X) x 7.86" (Z)
Maximum Axis Positioning Speed (X, Y)
3,150"/min. Per Axis (4,455"/min. 45° Vector)
Repeatability ±0.0002"
Max. Material Weight 2,000 lbs.
Assist Gas 4 Ports with NC Pressure Control
Electrical Requirements 200V, 3-Phase, 60Hz
CNC Controller
Model AMNC-F
Display LCD Color Graphics Display
Control Function X, Y and Z-Axis Simultaneous and Focus Lens B-Axis, Adaptive Optic and Laser Power Control
Data Input Method Manual (MDI), Edit, RS-232 DNC, or 3½" PC Compatible Disk, CD/DVD, USB, Ethernet PCMCIA
Minimum Command Unit 0.0001" (X,Y,Z)
Minimum Travel Unit 0.0001" (X,Y,Z)
Standard Memory 2MB
Compact Flash Drive 2GB
Operating Modes Automatic or Manual
Display Modes Program Contents, Position Information, Program Check, Settings, Parameters, Beam Diameter, Compensation, Assist Gas Status, Self-Diagnostics, Maintenance Reminders
Interlock Displays Cooling Water Status, Gas Pressure Status, Vacuum Status, Turbo Blower Malfunction, Shutter Status, Beam Power, Resonator Discharge, Door Open
Electrical Requirements 200V, 3-Phase, 60Hz
Dimensions
248.03"
109.
37 "
Duct Length: 196.85"Shuttle Control Box
87.2
8"
77"
34.3
5"
NC Control Panel
33.27 "
Dust Collector
134"
All components are serviced and supported by Amada’s own highly-trained personnel.
Amada’s offline programming software and hardware can be supplied with the machine as an option.
Turn-Key Package:
• Beam Purge Unit
• Chiller
• Dust Collector
• Gas Regulator and Connection Kit
• Consumables (Focus Lenses, Cutting Nozzles, Slat Tables)
• Enhanced AMNC-F PC Control
– Complete Cutting Library with Automatic Cut Settings
– Automatic Maintenance Scheduler
– High-Speed and Efficient Pierce Functions
Recommended