View
216
Download
2
Category
Tags:
Preview:
DESCRIPTION
emerson, book, itt
Citation preview
AC PowerFor Business-Critical Continuity™
Power Solutions IT System Protection That Grows With Your Needs
TROUBLE IS COMING DOWN THE POWER LINE
AND YOU MUST BE PREPARED
Every operation in your business depends upon the instant, around-the-
clock availability of computers, servers and other electronic systems. If they
aren’t working, neither is your company.
Unfortunately, every piece of this equipment your company possesses is
subject to the whims of the electricity that powers it.
The first step in taking control of this situation is to understand the threats
to your system reliability—and exactly what you can do about them.
2
YOU FACE MANY CHALLENGES INTHE PURSUIT OF PRODUCTIVITY
Is There Really A Problem?“My computer can ride right through a short blip in the
power—why do I need anything else?”
There Are No Simple Solutions“I have people telling me all I need to do is plug each
workstation into a small UPS from the computer store .
That’s good enough, isn’t it?”
Different Needs Require DifferentPower Protection Configurations “Should I have a small UPS for each workstation or
have everything on one large system . Which is best
for my facility?”
A Lot Can Happen Between Your UPSAnd The Equipment It Is Protecting“We have dozens of pieces of networking equipment. How
can I make sure that each one is getting exactly the power
it needs?”
Every Wire Carries The Potential For Trouble“An electrical surge came in through an outside phone line
and knocked out our entire communications system. Is this
going to happen again?”
A Single Source Of Power SimplyMay Not Be Enough“Adding a second power feed would certainly enhance our
availability picture—but who can we talk to about getting
it done right?”
3BUT THERE ARE REAL SOLUTIONS
You Need Protection From All Power ProblemsAn outage is just the problem you can see. There are many other more frequent power
fluctuations—surges, spikes, sags—that you don’t see. These are the conditions that cause the
“unexplained” lock-ups and other potentially damaging results.
“Out-Of-The-Box” Can Put You Out Of BusinessBuying a simple off-line UPS down at the computer store may be a good solution for your
home PC, but it just doesn’t make sense when your business and productivity are on the line.
Protecting critical network and computing systems requires the expertise of someone who
understands all the risks you face from poor power quality.
Centralized Vs. Distributed UPS ProtectionLiebert has the breadth of products that allows you to implement either a centralized or
a one-on-one distributed power protection strategy depending on your requirements.
Whatever configuration you choose, you can count on Liebert to make it the best it can be.
Benefits, such as increased system security, more efficient maintenance and improved
reliability, may make a centralized strategy a better choice for larger operations.
Proper Power Depends On Proper Distribution In network applications, there may be hundreds of different loads with various voltage
requirements, a mix of AC and DC power, plus any number of other electrical specifications.
This calls for a distribution system that is designed to maintain the highest levels of reliability
and quality between the source of conditioned power and the protected equipment.
Power Conditioning And Surge Protection Throughout The FacilityPower conditioning and surge suppression systems are key to maintaining power quality in
critical facilities. Raw utility power is often far too “dirty” for sensitive systems, resulting in lost
or garbled data, unexpected software glitches or shutdowns, even hardware damage. The IEEE
recommended practice is to install transient voltage surge suppression (TVSS) protection on
every electrical conductor that penetrates a facility shell, including power lines, telephone and
other communications links.
Maximum Reliability Demands Dual Power SourcesIf your needs require the highest level of system availability, Liebert has the knowledge and
products to implement a dual-power strategy throughout your enterprise. UPS, transfer
switching, power distribution and other equipment are all brought together to create the
ultimate in reliability.
WHERE DO YOU NEED MISSION-CRITICAL POWER PROTECTION TECHNOLOGY?
4
We have power solutions for any of the applications that are part of your mission-critical business operations.
Liebert has identified ten distinct zones or areas of application, found within many business operations,
which have a requirement for mission-critical power technology. While these zones have similarities in the
importance of their essential functions, they also have different needs for infrastructure protection—all of
which can be met by Liebert solutions.
Large Data Centers—High
availability data and network
applications are the heart of your
enterprise with blade servers and
high-density racks that demand
increased power protection.
Small To Mid-Size Data Centers —
Smaller sized network and computer
facilities, but equally essential to your
operations.
Network Closets—Housing
routers, switches, modems, cabling
devices and numerous other
communications components.
Network Operations Centers—
As networks expand and grow
more complex, you need reliable
and timely access to mission-critical
infrastructure monitoring information
long before problems arise.
Production—Smart factories
backed by a complex electronic
network, from computer-
controlled machinery and
processes to electronic sensors,
business systems and utility
equipment.
Laboratories and Testing—
Sensitive computers and
equipment used for diagnosing
patients, analyzing data,
performing critical tests,
and operating electronic tools
and lab instruments.
Telecom/CATV—Anything from
indoor and outdoor spaces hosting
cable, DSL and fiber optics to
remote cell sites and enclosures.
Emergency Shelters—Emergency
operations centers, 911 response
emergency dispatch, police and fire
facilities, medical facilities, public
works operations and more.
Desktop/Peripherals—Home and
small office computers, modems,
network components and other
electronic equipment that is vital
to business operations.
Point-of-Sale—Today’s cash
registers and store-level computer
networks not only handle sales
transactions, they also collect
and transmit vital customer and
inventory data required to make
informed supply chain decisions.
BiotechnologyIndustry
Retail
Distribution
Industrial
ComputerSystemsHealth Care
Government
Network Operations CentersWith many mission-critical computingsystems located right in the officespace, there is a need for UPS protection that can be placed nearby.Liebert offers a number of power systems that are especially designedfor use in business and office environments.
Small to mid-size Data CenterLiebert offers the full range of UPS, distribution systemsand other power protectionequipment that can adapt to data center growthrequirements.
ProductionLiebert UPS, surge protection and powerdistribution are all key to maintaining theproper operation of process control andother manufacturing systems that utilizemicroprocessor and computer control.
Mechanical RoomsLiebert power protection and conditioningsystems can greatly improve the operationof electrical switchgear and motor controlcenters vital to numerous functionsthroughout an industrial facility.
Emergency SheltersHigh-reliability Liebert UPS systems and DCpower equipment are critical to maintainingoperations in telecommunications sheltersand other unmanned structures.
Data CenterLiebert offers the fullrange of UPS, distributionsystems and other powerprotection equipment tomeet the needs of thelargest data centers andnetworking facilities.
Network ClosetsThese densely-packed equipmentbays, housing servers or other essential communications devicesrequire UPS back-up plus distributionto get uninterrupted, conditionedpower to each and every componentin the rack.
Telecom Wireline/Wireless SitesLiebert can provide a reliable flow of both AC and DC power for telephone switching systems and other communications equipment.
6
The Liebert Adaptive Architecture combines the
advantages of modularity and scalability to create a power
infrastructure that delivers unparalleled benefits.
THE LIEBERT ADAPTIVE ARCHITECTURE:THE POWER NEEDED TODAY. THE FLEXIBILITY
DEMANDED TOMORROW.
Advancing technology, new applications and more
demanding users are driving changes across the
network. Changes that are shaping your ability to
manage availability and costs—today and in the future.
Liebert’s Adaptive Architecture for IT infrastructure
uses components and system configurations that are
designed to accommodate changing technology and
application requirements, enabling higher levels of
equipment protection, lower cost of ownership and
simpler IT management.
The Adaptive Architecture is enabled by the
combination of Liebert technology, application
expertise and organizational commitment. Liebert
offers the industry’s broadest range of mission-critical
power, cooling and monitoring solutions, which serve
as the building blocks of an adaptive architecture.
No One Has More Real-WorldExperience Than Liebert
The Liebert Adaptive Architecture is the result of more
than 40 years experience in the development and
application of mission-critical power and cooling
systems. Our resources include knowledgeable
leadership, as well as an outstanding staff of research,
design, application and service engineers using the
latest technological tools.
These corporate capabilities are backed by the
unmatched expertise of your local Liebert
Representative, Distributor or Solutions Partner. We are
the only company in this business that maintains such a
strong local presence on a national and international
basis. Specifying and maintaining a high availability
power system requires someone who is knowledgeable
in all phases of critical systems protection.
This resource, coupled with our broad adaptive
product line, gives Liebert the ability to create a solution
that will meet your protection needs precisely and
efficiently. We don’t have to take the one or two items
we happen to have and stretch them to come up with
the answer. We give you the best answer every time.
7
Only Liebert can bring together all of the critical
power protection solutions you need to create
system availability that is as close to 100% reliability
as possible.
We use the industry’s widest range of product
solutions and apply them in a way that delivers
flexibility and availability. This philosophy is further
demonstrated by a research and development
strategy that extends the life of current
technologies and ensures new technologies work
with existing systems.
The Liebert Adaptive Architecture Offers Three Primary Advantages:Flexibility—The building blocks that comprise an
Adaptive Architecture can be reconfigured to meet the
demands of new technologies or achieve higher tiers of
protection, giving the power to adapt to change from
growth, new technologies or changing business
requirements.
Higher Availability—Proven mission-critical
technologies and system designs that minimize single-
points-of-failure produce the highest possible
availability of your IT systems.
Lowest Total Cost of Ownership—The higher
availability alone gives the Liebert Adaptive
Architecture a big edge in TCO. Factor in expansion,
support, operating and replacement costs and the
advantage is overwhelmingly in Liebert’s favor.
ADVANTAGE LIEBERT
8
UPS Systems
Liebert offers all three major uninterruptible power supply
(UPS) system configurations:
n Off-Line UPS—Passes utility power straight through to the
protected load with a 2-6 ms break in power when transferring
to battery back-up.
n Line Interactive UPS—Provides power conditioning with a
2-6 ms break in power when transferring to battery back-up.
n On-Line (Double Conversion) UPS—Delivers continuous,
high-quality AC power to equipment with no break when
transferring to battery. Protects equipment from virtually
all power disturbances due to blackouts, brownouts, sags,
surges or noise interference.
Liebert offers UPS systems in the industry’s widest range of
sizes including desktop, rack-mount and enterprise systems for
full facility power.
DC Power Systems For Communications Applications From major switching centers to remote shelters, Emerson DC
power systems offer performance and features to match virtually
every telecommunications equipment application. The line
includes a variety of system capacities ranging from small
systems at less than 3 kW up to large systems rated at over
60 kW. The product offering also includes distribution bays,
enclosures and network management products such as
controllers, monitors and supervisory software to control and
maintain energy equipment in a telecommunications network.
Critical Electrical Distribution Liebert offers a range of power distribution systems designed
to efficiently deliver conditioned power to your critical equipment.
These products include high-reliability distribution systems
specially designed for computer and communications systems
applications, as well as transfer switches offering ultra-fast
transfer between two independent AC power sources to provide
virtually uninterrupted power to sensitive electronic equipment.
Power Quality Protection For applications requiring protection from electrical line
disturbances without the need for back-up capability, Liebert
manufactures a full line of power conditioning equipment. It
includes a wide variety of transient voltage surge suppression
(TVSS) solutions ranging from high-quality surge suppressors
for use with PCs, workstations and other peripherals to
facility-wide systems with sophisticated active tracking
capability. Other products include power conditioning systems
featuring high-efficiency magnetic synthesizer technology
and isolation transformers to reduce line noise and other
power line problems.
Power System Monitoring Liebert’s family of power communications software and
hardware provides multiple levels of monitoring and control.
Capabilities range from automated shutdown software to
facility-wide centralized systems that provide a full range of
monitoring, control and analysis.
A COMPREHENSIVE POWER SOLUTION—WE’RE THE ONLY ONE WHO HAS IT
The Widest Range Of Products GivesYou An Infinite Range Of Solutions
9
There Is A Liebert Power SolutionTo Meet Every Need
CONTENTS
Co
mp
ute
r Ro
om
s
Dat
a C
ente
rs
Net
wo
rk C
lose
ts
Pro
du
ctio
n
Lab
s &
Tes
tin
g
Tele
com
/ C
ATV
Emer
gen
cy s
hel
ters
Des
kto
ps
/ Per
iph
eral
s
Poin
t of
Sal
e
MISSION-CRITICALAPPLICATION ZONES
10 Desktop UPSFor One-On-One Applications
11 Liebert PowerSure PST off-line UPS n n
12 Liebert Powersure PSP off-line UPS n n
13 Liebert PowerSure PSA line-interactive UPS n n
14 Rack-Mount UPS For Distributed Network Applications
15 Liebert PowerSure PSI line-interactive UPS n n n n
16 Liebert GXT2, 500-3000VA on-line UPS n n n n n n n
17 Liebert GXT2,6 and 10 kVA on-line UPS n n n n n n
18 Rack Enclosure Systems
18-19 Knurr rack enclosure system n n n n n n n n
21 Liebert Foundation EX expansion system option n n n n n n n n
22 Liebert MP advanced power strips & Knurr DI-STRIPs n n n n n n n n
23 Enterprise UPS For Computer Room And Data Center Applications
24-25 Liebert Nfinity on-line UPS n n n n n n n
26 Liebert NX, 10-30 kVA on-line UPS n n n n n n
26 Liebert NX, 40-120 kVA on-line UPS n n n n n n n
27 Liebert Npower on-line UPS n n n n n n n
28 Liebert Series 610 on-line UPS n n n n n
29 Liebert FS flywheel DC energy storage n n n n n
30 DC Power Systems For Telecommunications Applications
31 NterpriseIP™, Small Power, Medium Power, Large Power, n nInverter Systems
32 Power Distribution Systems For Critical Protection Applications
32 Liebert FDC power distribution cabinet n n n n
33 Liebert RDC remote distribution cabinet n n n n
34 Liebert Precision Power Center power conditioning and distribution cabinet
n n n
34 Liebert FPC power conditioning & distribution cabinet n n n
35 Liebert SmartSwitch transfer switch n n n n
36-37 Liebert STS2 static transfer switch n n n n
36-37 Liebert STS2/PDU static transfer switch/power distribution unit
n n n
38 Surge Protection And PowerConditioning Systems
Surge Suppression39 Liebert AccuVar transient voltage surge protection n n n n n n n n n
39 Liebert Hybrid Advantage surge protection n n n n n n n n n
39 Liebert Interceptor transient voltage surge protection n n n n n n n n n
39 Liebert LM Series surge protective device n n n n n n n n n
39 Liebert Type SS surge protection n n n n n n n n n
39 Liebert Panelguard Extension panelboard surge protection
n n n n n n n n n
39 Liebert Specialty Surge Protection Devices n n n n n n n n
Power Conditioning40 Liebert Datawave magnetic synthesizer n n n41 Liebert Isolation Transformer n n n
42 Monitoring And Control n n n n n n n
One-On-One ProtectionThe Liebert PowerSure® family includes
off-line UPS and line-interactive UPS to
give you a real choice in desktop and
network component protection.
PERFECTPROTECTIONFOR DESKTOPAND SMALLNETWORKAPPLICATIONS
Liebert desktop power solutions are
designed for applications where one or a
few pieces of equipment require surge
suppression or basic power protection
with battery back-up.
Liebert PowerSure® ProductsOffer One-On-One PowerProtection Solutions Forn Home And Small Office Desktop PCs
n Network Workstations
n Network Routers, Bridges And Hubs
n Point-of-Sale Terminals
n Other Sensitive Electronics
10
De
skto
p U
PS
11
The Liebert PowerSure PST off-line UPS is available in: 350 and 500 VA at 120 VAC,
as well as 500 and 650 VA at 230 VAC. Designed for easy operation, the Liebert
PowerSure PST provides enough battery back-up to save work in process and shut
down your system.
Standard Features For All Liebert PowerSure PST Models:n Lightning and surge protection
n Compact design [dimensions: 3.7” (H) x 9.8” (W) x 6.6” (D)]
n Data line surge protection for telephone/fax/DSL/modem
n USB, Microsoft Windows (XP and 2000) and Mac (OS X version 10.2 or later) Certified
n USB communications port for unattended shutdown
n Continuous overload detection
n Battery start (dark start) capability
n Multi-LED indicators
n Three battery-backed outlets and two surge-only outlets
n Alarms for on battery, low battery, overload and site wiring fault
n Advance warning of UPS shutdown
n Full sequenced battery testing
n Two-year warranty
LIEBERT POWERSURE® PST OFF-LINE UPS
COMPACT, ECONOMICAL OFF-LINEUPS POWER PROTECTION FOR
ELECTRONIC EQUIPMENTD
esk
top
UP
S
Data Line Surge Suppression (One Input/Two Output Ports)
Liebert PowerSure PST Offers USB Communication
The operation of Liebert PowerSurePSP can be monitored using
n Liebert MultiLink® AutomatedSystem Shutdown Software
For more information, see pages 42 and 43.
Liebert Power Monitoring Capabilities
Liebert PowerSure PSP is an economical, full-featured UPS that delivers cost-effective power
protection in a compact package. It features a configurable input power selector switch,
offering the user a wide input voltage window. The Liebert PowerSure PSP is
available in three sizes: 350, 500 and 650 VA at 120 VAC. For maximum flexibility with a
variety of computing equipment, the unit includes a choice of communications—USB,
serial or contact closure.
LIEBERT POWERSURE® PSP OFF-LINE UPS
FULL-FEATURED OFF-LINE UPSPROVIDES COST-EFFICIENT,
SPACE-SAVING POWER PROTECTION
Liebert PowerSure PSP Offers A Variety Of Standard Features:n Four battery-backed UPS outlets with spacing to accept transformer blocks
n Two surge-only outlets
n Greater than four minutes of battery backup at full load
n Wider input voltage window
n User replaceable hot-swappable batteries
n Full-sequenced battery testing
n Lightning and surge protection
n Data line surge protection for telephone/fax/DSL/modem
n USB, Microsoft Windows (XP and 2000) and Mac (OS X version 10.2 or later) Certified
n Two-year warranty
Data Line SurgeSuppression
User replaceable Hot-Swappable BatteriesIncrease product life andoffer prolonged, reliable UPSperformance.
Data Line SurgeSuppression
Outlets WithSpacing ToAcceptTransformerBlocks
12
The operation of the LiebertPowerSure PSA can be monitoredusing
n Liebert MultiLink® AutomatedSystem Shutdown Software
n Third Party Monitoring System
For more information, see pages 42 and 43.
Liebert Power Monitoring Capabilities
13
De
skto
p U
PS
LIEBERT POWERSURE® PSA LINE-INTERACTIVE UPS
VALUE-ADDED UPS COMBINESADVANCED FEATURES WITH
LINE-INTERACTIVE PERFORMANCE
Liebert PowerSure PSA is a line-interactive UPS available in four sizes: 350, 500,
650 and 1000 VA at 120 VAC and 230 VAC. The Liebert PowerSure PSA features double
boost/single buck technology that prolongs UPS battery life by providing automatic
voltage regulation (AVR) and compensating for incoming power fluctuations before
going to battery. The unit also includes a microprocessor-based control and monitoring
package with dual color LED indicators on the front panel for easy operation. A choice of
communications includes USB, serial or contact closure.
Other Standard Features Included On All Liebert PowerSure PSA Models: n Lightning and surge protection
n Data line surge protection for telephone/fax/DSL/modem
n USB, Microsoft Windows (XP and 2000) and Mac (OS X version 10.2
or later) Certified
n 4 or 6 battery-backed UPS outlets with space for transformer blocks,
and two surge-only outlets
n Continuous overload detection
n Hot-swappable user replaceable batteries
n Greater than five minutes of battery backup
time at full load when utility fails
n Battery start (dark start) capability
n Full sequenced battery testing
n Two-year warranty
Rack-mounted servers are at the heart
of today’s network computing systems.
These critical components need reliable,
compact power protection that will keep
pace with their growing needs.
Protection That Fits In Anywhere
From line-interactive units to true
on-line models, Liebert rack-mount
UPS systems are designed for reliability
and space-saving flexibility. No one
packs more power capacity and
features into a smaller package.
Liebert Has Rack-mountUPS Solutions For:n PCs
n Network Workstations
n Servers and Critical Nodes
n Network Routers, Bridges and Hubs
n Large Network Peripherals
n Storage Systems
n Point-of-Sale Terminals
n Test Equipment
n Other Sensitive ElectronicsR
ac
k-M
ou
nte
d U
PS
14
R AC K- M O U N T E DPOWER SOLUTIONS FO R GROW I N GN E T WO R K S
Other Standard Features OfLiebert PowerSure PSI: n Seven to eight battery-backed outlets
n Data line surge protection for
telephone/fax/DSL/modem
n Advance early warning of UPS system status
n User-replaceable hot swappable batteries
n Configurable input voltage selector
n Wider input voltage window
n Greater than five minutes of battery
backup time at full load when utility fails
n External battery cabinet available
n Full sequenced battery testing
n Lightning and surge protection
n USB, Microsoft Windows (XP and 2000) and
Mac (OS X version 10.2 or later) Certified
n Remote emergency power off
n Two-year warranty
The operation of Liebert PowerSurePSI can be monitored using
n Liebert MultiLink®AutomatedSystem Shutdown Software
n Liebert Nform MonitoringSystem
n Third-Party Monitoring Systems
For more information, see pages 42 and 43.
Liebert Power Monitoring Capabilities
15
Ra
ck
-Mo
un
ted
UP
S
LIEBERT POWERSURE® PSI LINE-INTERACTIVE UPS
PROVEN HIGH-LEVEL PERFORMANCEAND RELIABILITY FOR SERVER AND
NETWORK POWER PROTECTION
Designed for the IT environment, Liebert PowerSure PSI is a slim 2U size rack/tower style,
line-interactive UPS system. It offers a configurable input voltage window allowing the
customer to precisely match their input voltage. A choice of four communications options
includes SNMP, serial, contact closure and USB. The Liebert PowerSure PSI is available in
1000, 1440, 1920, 2200 and 3000 VA at 120 VAC and 1000, 1440, 2200, 3000VA at 230VAC.
Optional 2U POD output distributionand maintenance bypass moduleensures continuous uptime, even during UPS maintenance.
External 2U Cabinets supply additionalbackup time.
The operation of the Liebert GXT can be monitored using
n Liebert MultiLink® AutomatedSystem Shutdown Software
n Liebert Nform MonitoringSystem
n Liebert Universal Monitor andRemote Power Monitor Panels
n Third-Party Monitoring Systems
For more information, see pages 42 and 43.
Liebert Power Monitoring Capabilities
Liebert GXT leads the industry in combining small size, high capacity and multiple features.
Designed to be either rack-mounted or installed in a tower configuration, the UPS is available in 500,
700, 1000, 1500, 2000 and 3000 VA ratings, in both 120 V and 230 V models.
A true on-line UPS, Liebert GXT includes features such as power factor correction, internal
batteries, frequency conversion, unlimited external battery connectability and internal bypass
capability. And all this is housed in a smaller 2U size cabinet that cuts space requirements in half
while providing up to 3 kVA of true on-line power…batteries included. The UPS can also be used
with external batteries for extended run times.
A Windows™ configuration program, included with each unit allows the user to program a
variety of operating parameters. This capability allows you to customize Liebert GXT performance
to your specific requirements, providing a new level of power protection control and adaptability.
LIEBERT GXT 500-3000VA ON-LINE UPS
COMPACT UPS COMBINES ON-LINERELIABILITY, CONFIGURABILITY AND
INTERNAL BATTERIES
16
Other Features Of Liebert GXT 2U Models: n Microprocessor-based control and
monitoring packagen Input power factor correctionn PWM invertern Integral dynamic bypassn Integral sealed, flame retardant, non-spillable,
user replaceable batteryn Automatic and manual battery test feature
with push button and indicatorn Input and output noise suppressionn RS232 communication port n IntelliSlot® communications portn Two-year limited warranty
LIEBERT GXT 6 & 10 KVA ON-LINE UPS
HIGH CAPACITY, COMPACT ON-LINE UPSWITH FLEXIBLE OUTPUT VOLTAGE AND
POWER DISTRIBUTION
Other product features of LiebertGXT 6 & 10 kVA UPS models include:n Wider input voltage window enables the UPS
to support the critical load without having to
transfer to battery
n Patented output neutral bonding feature
meets UL 1778 standard by providing a
method for maintaining the UPS output neutral
to ground bond in all modes of operation
n Internal bypass assures continuity of power
to critical loads during system problems
or maintenance
n Automatic frequency detection matches line
input frequencies of either 60 or 50 Hz
n User-replaceable hot swappable internal
batteries provide five minutes of runtime
at full load
n Additional battery cabinets available for
extended backup time
n Liebert IntelliSlot® communications port
utilizes Liebert IntelliSlot® Web Card to
provide SNMP and web-based management
The operation of the UPS can bemonitored using
n Liebert MultiLink® AutomatedSystem Shutdown Software
n Liebert Nform MonitoringSystem
n Liebert Universal Monitor AndRemote Power Monitor Panels
n Third-Party Monitoring Systems
For more information, see pages 42 and 43.
Liebert Power Monitoring Capabilities
User replaceable hot swappableinternal batteries
Liebert GXT 6 & 10 kVA UPS systems provide true on-line protection in the smallest cabinets in
their capacity range. The UPS systems offer internal batteries, unlimited extended external
batteries, and internal bypass capability, resulting in continuous uptime for the connected
equipment. This makes the UPS an ideal fit in applications where the power requirements are
demanding—but rack space is limited.
Application versatility is achieved through the use of a dual inverter design capable of providing
simultaneous output voltages of 240/120, 208/120, 230/115, 220/110, or 200/100 VAC. The input
is power factor corrected to approximately .98, enabling the UPS to power a wide variety of
equipment with different voltages.
For installation flexibility, you may choose from several different wiring configurations made
possible by the use of removable power distribution boxes that simply plug into the rear of the UPS.
Options include hardwired or receptacle connections, as well as maintenance bypass capabilities.
17
Ra
ck
-Mo
un
ted
UP
S
KNURR RACKS AND CABINETS
READY-TO-DEPLOY RACK AND ENCLOSURE SOLUTIONS
Emerson Network Power’s Knurr, a world leader for standardized rack systems, has joined withLiebert to build comprehensive capabilities in rack solutions, mission-critical cooling, and systemsintegration for data center and telecom sites.
Knurr’s broad platform of rack systems will integrate with cooling and power managementtechnologies from Liebert, helping you solve problems in new and existing installations and givingyou more design flexibility. Knurr and Liebert are taking proven technologies from room-levelapplications and integrating them with the rack.
18
KNURR MIRACEL® OPEN FRAME ANDSERVER RACKS
Knurr Miracel racks are tailored to your requirements. The platform technologyprovides the basis for a versatile range of racks, which has been setting standards in theworld of IT, telecommunications and network technology as the solution for a diverserange of requirements.
The design of the Knurr Miracel product line enables all requested dimensions andstandards to be tailored to specific customer requirements. Adjustments can be easilymade thanks to the broad range of Knurr accessories, including active and passivecomponents, need-oriented power supply and distribution, cable management andscalable thermal management options.
The range of products runs from open racks to closed cabinets, EMC-shielded to heavy-duty racks with a static load of up to 2000 lbs. All are equipped to meet the most diversecustomer needs. The racks are lightweight yet stable, easy-to-assemble and offernumerous configuration possibilities.
19
Ra
ck
s & In
teg
rate
d C
ab
ine
ts/Ma
na
ge
d P
ow
er
Key features include:
n Aluminium construction — Patentedextruded aluminum frame allows for easy mounting of components, and offers high flexibility and stability withoutexcessive weight.
n T-slot system — Simple installation of manycomponents — anywhere in the frame.
n Thermal management — Fully perforateddoors, with 83% open area far exceed serverOEM requirements for effective heatdissipation additionally, a fan can be highlyeffective mounted on the rear door for spotcooling.
n Lockable doors — Offers physicalprotection for components against
unauthorized access.
n Cable management — A complete cablemanagement system assures optimum cable routing and includes an extensiverange of accessory components to helpmanage cabling effectively.
n Vented roof— A vented roof also offersgenerous cable entrance.
Liebert GXT on-line UPS
EnvironmentalControl Module(ECM)
BCM (Back-up Cooling Module)
Secure Door—lockable doorprovides anextra measureof security bylimiting accessto critical equipment.
Sealed Door — speciallydesigned rubber gasketprovides NEMA12 sealing protection.
Where a minimal amountof equipment is needed,the Foundation 44” tallenclosure provides compact protection.
Dual-Split RearDoor available
Bundled UPSsystems available
Wall Mount Systems12 U Hinge Body “swingout” and 12” depth LowProfile available.
Internal PowerDistributionA wide range ofinstalled powerstrips is availableto betteraccommodatepower distributionneeds within theenclosure.
EX Cable ManagementChannelThis versatile optionhelps to enhancecabling organizationand internal airflow.
20
True On-Line Power Protection
Protecting The Edge Of The Network
Liebert has brought together severalof our product solutions to create theIP Telephony Availability System.Especially designed to protectswitches, routers and other criticalcomponents, this solution is ideal foruse in remote locations such as branchoffices, retail stores and other edge ofthe network applications. Housed in aLiebert Foundation™ wall mountenclosure or freestanding enclosure.
The Liebert UpStation®
GXT 2U, a true doubleconversion UPS, delivers thehigh level power qualityrequired to fully protectcritical network switchingcomponents from all powerproblems. Available in sizesfrom 700 up to 3000 VA.
Continuous Power Availability
In most cases, your criticalrouters and other networkcomponents cannot bewithout power even forscheduled UPSmaintenance. To meet thisneed, the Liebert 2U PowerOutput Distribution (POD)system ensures continuousuptime by providingmaintenance bypasscapability as well as poweroutput distribution.
Power System Monitoring,Communications & Remote Control
The Liebert Webcard, housed within the UPS, will deliver SNMP and web-managementcommunicationscapabilities to yourpower system, includingthe ability to remotelyreboot the switch by cycling the UPS power off and on.
The Liebert IP Telephony Availability System, version1.0, has met the Cisco Technology Developer PartnerProgram test criteria for interoperability with CiscoCallManager Express 3.1, Cisco Unity Express, release1.1.2, Cisco Unity 4.0 (3), and Unity Bridge 3.0 (2).
Liebert IP Telephony Availability System
21
Inte
gra
ted
Ca
bin
et S
olu
tion
s/Ma
na
ge
d P
ow
er
LIEBERT FOUNDATION® EX EXPANSION SYSTEM OPTION
ADAPTIVE SPACE FOR HIGH DENSITY HEAT,CABLE AND EQUIPMENT SUPPORT
Liebert continues its leadership in critical space thermal, power and equipment management by
introducing the Liebert Foundation EX System—a flexible solution to rack enclosure space and
cable problems that utilizes an “Expansion Channel,” cable management and heat rejection
options to provide adaptive space for airflow, equipment and cable support. The Foundation EX
system allows you to quickly respond to the changing space, cabling and heat removal
requirements of your rack-based systems.
Adaptive features of the LiebertFoundation EX System include:
n The ability to individually adapt each enclosure tochanging space, cabling and heat removal requirementswithout the necessity of removing equipment—hotswappable.
n Cost-effective performance thanks to optimized use of critical rack space and adapting to changingequipment depth and space requirements.
n Enhanced heat rejection and airflow routes andremoves heated air using passive/active options and cable management.
n Organizes cabling, distributes power, improves equipment access, minimizes disruptions and optimizes air flow within the enclosure.
n Improved equipment access supports high load densities, improves management of components,allows easy installation of equipment.
n Fully compatible with Liebert Precision Cooling andXD Systems.
n Integrates easily with Liebert power systems, including UPS and Liebert MP Advanced Power Strips.
Foundation EX—available in 2,4,6 inch size.
Variety of CableManagement—spools, rings, trays,velcro, vertical orhorizontal alignment.
Cable troughs speed and simplify wiring-mounted tothe enclosure top for directrack-to-rack or row of racks.
Inte
gra
ted
Ca
bin
et S
olu
tion
s/Ma
na
ge
d P
ow
er
22RACK POWER STRIPS
FLEXIBLE POWER DISTRIBUTION FOR ITRACKS AND CABINETS
Liebert MP Advanced Power Strips
Liebert MP advanced power strips are
designed to distribute and manage power
within network cabinets and server racks.
Models are available with remote monitoring
and/or control capabilities for power
distribution at the load/equipment level.
Liebert MP Advanced Power Strips are
offered in multiple configurations that
provide a choice of capacities and number of
receptacles, as well as monitoring and control
capabilities to meet the power management
requirements of any rack-mounted
equipment. Liebert MP Advanced Power
Strips monitor electrical attributes of an
individual power strip, including real-time
remote and local display of total strip true
RMS volts, amps and watts.
Knurr DI-STRIP® Power Strips Knurr DI-STRIP® Power Strips meet a broad
range of power distribution requirements forIT and other applications. Designed especiallyto handle the growing number of electroniccomponents that can be housed withinnetwork cabinets and server racks, the spacesaving product line is available with a range ofaccessories including circuit breakers,overvoltage protection and more.
Knurr DI-STRIP is available in configurationsto meet varied rack mount equipment needs:
n The Knurr DI-STRIP® TriplePower® strip usesa three-phase feed to supply network rackswith three times the power to meet therising energy requirements of blade serversand other high-density equipment. TheKnurr DI-STRIP Triple Power strip is availablewith up to 48 receptacles for maximumpower distribution coverage.
n The Knurr DI-STRIP® BladePower® powerstrip is a new generation of the powerdistribution units that ensures fail-safepower supply in network racks. The KnurrBladePower optimally distributes therequired power over the entire rack.
n The Knurr DI-STRIP® Classic power stripoffers cost-efficient power distribution for awide variety of rack applications utilizingNEMA5-15R receptacles.
The need to safeguard critical operationsfrom power problems can be solvedthrough the use of large-scale UPS systems.
A Powerful Defense AgainstUptime Threats
Liebert offers a full range of enterprise
power protection solutions for any size
facility from a small computer room to the
largest data and communications centers.
Liebert Enterprise UPS SolutionsAre Ideal Forn Large-Scale Data Centers
n Facility-Wide Networks
n Large-Scale Telecommunications Centers
n Colocation Facilities
n Internet Data Centers
n Server Farms
n Data Warehouses
n Network Management Centers
n Medical Imaging Equipment
n Test and Laboratory Facilities
n Industrial Process Control Operations
PROTECTING THE ENTERPRISE
23
En
terp
rise U
PS
LIEBERT NFINITY®
AN EASILY SCALABLE, INCREDIBLY INTELLIGENT,
REMARKABLY REDUNDANT UPS THAT TAKES SYSTEMS
AVAILABILITY TO THE NEXT LEVEL
The Liebert Nfinity power system is a scalable 4 to 16 kVA or 12 to 20 kVA UPS
designed with N+x parallel redundancy to provide a fault-tolerant network of power
protection. Its modular design was devised to provide easy scalability to users as
their power demands grow. Configurations can be cost-effectively upgraded without
re-investing in a new system or installation.
A True On-Line System That Delivers Continuous,Regenerated SinewaveOutput Power
The Liebert Nfinity is a true on-line,
double-conversion UPS that delivers
100% power conditioning, zero transfer
time to battery, no change in output
voltage and better transient suppression
than line-interactive units.
Its unique frame design houses all of
the modular system components,
including 4 kVA power modules, battery
modules and system control modules.
By simply installing additional power or
battery modules, you can expand your
current system, extend backup runtime
or add redundancy.
Built-in intelligence is provided by
system level and individual module
microprocessor controls which increase
UPS functionality, communications and
reliability. Nfinity also offers added
reliability with internal bypass and
optional redundant monitoring.
The system’s fault-tolerant design
enables the intelligent power and
battery modules to take themselves
off-line if there is a problem…without
compromising system integrity.n Intelligent power modules provide
protection from all power
aberrations, and a patent pending
electrical-current-sharing technology
provides equal distribution of power
among all modules. Liebert Nfinity
power modules feature power factor
correction (PFC) to create a sinusoidal
input current waveform.
n The IntelliBattery™ modules utilize
multiple sensors to continuously
monitor battery voltage, current
and temperature to determine and
predict performance.
n The IntelliControl™ module works
with the user interface to provide vital
information about the condition of
the power and battery modules. An
optional paired system control ensures
that operations and communications
are always available in the event of
any single failure.
24
25
En
terp
rise U
PS
Additional Features Of The LiebertNfinity Power System:n Patent pending frame design that houses all of the
modular system components
n Hot-swappable modules that allow the user to replace
modules or upgrade the system without disturbing
connected equipment
n Continuous self-diagnostics that detect and isolate
faults to prevent cascading system failures, as well as
to simplify maintenance and troubleshooting
n Patent pending intelligent bypass technology that
provides seamless transfers to and from the bypass source
n Wide input voltage window that minimizes battery
operation to maximize battery life
n Fully assembled and factory-tested, simple to install
and ready for use for a plug-and-play solution that is
functional right out of the box
n Additional battery cabinets can be added for backup
times up to 72 hours
n Two-year limited warranty for repair or replacement of
your Liebert Nfinity UPS during the initial warranty period
with warranty extensions also available
Power and batterymodules are housed in identical bays withinthe frame. Power modules must be contained in the tophalf of the frame, whilebattery modules can be utilized in any of the bays. This allowsbattery backup timesto be configured to customer needs.
The system controlmodule provides communications andcontrol for the unit.
The system utilizes independent 4 kVApower modules. Up to six power modulescan be operating atone time.
Each battery module is composed of tenindividual 12-volt batteries encased in a plastic housing.
Initial System4 kVA Redundant
PowerModules
Blank
Batteries
UpgradeSystem Capacity8 kVA Redundant
PowerModules
Blank
Batteries
Extend SystemRun Time
8 kVA Redundant
PowerModules
Batteries
The operation of the Liebert Nfinity®
UPS can be monitored using
n Liebert MultiLink® AutomatedSystem Shutdown Software
n Liebert Nform™ MonitoringSystem
n Liebert Universal Monitor andRemote Power Monitor Panels
n Third-Party Monitoring Systems
For more information, see pages 42 and 43.
Liebert Power Monitoring Capabilities
The operation of the Liebert NX UPScan be monitored using
n Liebert IntelliSlot Web Card
n Liebert MultiLink® AutomatedSystem Shutdown Software
n Liebert Nform™ MonitoringSystem
n Liebert SiteScan® WebComprehensive FacilityMonitoring System
n Liebert Universal Monitor andRemote Power Monitor Panels
n Third-Party Monitoring Systems
For more information, see pages 42 and 43.
Liebert Power Monitoring Capabilities
26
LIEBERT NX UPS
POWER DESIGNED TO GROW WITH YOUR NEEDS
The Liebert NX is a true on-line, double conversion, three-phase UPS systems that delivers
complete, centralized power protection for mission-critical systems. Designed to meet the high
availability power needs of a wide variety of IT applications, the Liebert NX UPS combines
advanced operating features, compact size and low cost of ownership in a range of sizes to suit
room or data center needs.
Liebert NX 10, 15, 20 & 30 kVA UPS —
Increases growth flexibility by handling
larger loads, and offers the ability to
parallel like-sized 20 and 30 kVA modules
for increased capacity and redundancy.
Liebert NX 40, 60, 80, 100, 120 kVA UPS —
Available with Liebert Softscale™ technology that provides
flexibility to increase UPS capacity by 20 or 40kVA
without changes in your infrastructure. Allows paralleling
of unlike-sized models for capacity or redundancy.
Designed for optimized performance with the same high
efficiency at 40% utilization as at 100% utilization.
Liebert NX UPS systems incorporate anumber of exceptional technical features:n Wider input voltage and frequency tolerances contribute
to higher system availability by minimizing battery usage.n High overload rating handles 125% for 10 minutes, 150%
for one minute and a 1000% overload for 10 milliseconds.n Digital controls provide the fastest possible power
management to enhance reliability, accuracy and
efficiency.n Front access for easy installation and servicing of unit.n Triple-mode battery charger for fast battery recharge.n Compact footprint requires less floor space, leaving you
with more room for other equipment
En
terp
rise
UP
S
LIEBERT NPOWER™
INNOVATIVE POWER PROTECTION FORMAXIMUM POWER QUALITY
Liebert Npower is the next generation of large-scale UPS, utilizing true double-conversion on-line
technology to protect against the full spectrum of input and output power disturbances. Liebert
Npower’s all-digital ActiveStar™ controls are DSP-based and feature a unique, patent-pending technology
that allows it to make ultra-fast adjustments to changing loads, including subcycle pulse-width
corrections to keep the output voltage waveform nearly flawless. The Liebert Npower system is
available in seven models ranging from 30 kVA up to 130 kVA.
The Liebert Npower is rugged enough to handle load branch faults, input faults, 100% step loads, PDU
startup inrush and motor-load startup. Output voltage distortion (THD) typically measures less than
2.5% — even under worst-case conditions. The combination of rugged inverter and continuous-rated
static switch gives the Liebert Npower exceptional overload capability.
The operation of the Liebert NpowerUPS can be monitored using
n Liebert MultiLink® AutomatedSystem Shutdown Software
n Liebert Nform™ MonitoringSystem
n Liebert SiteScan® WebComprehensive FacilityMonitoring System
n Liebert Universal Monitor andRemote Power Monitor Panels
n Third-Party Monitoring Systemsn Liebert BDS-40 Battery Monitoring
Alber Technology By Liebert
For more information, see pages 42 and 43.
Liebert Power Monitoring Capabilities
Standard And Optional Features Of The Liebert Npower UPS:n 1+1 redundant configurations (for single-bus systems)
that allow concurrent maintenance resulting in virtually
100% availability of conditioned power
n Load bus synchronization option for dual-bus systems
with two power feeds for added availability (for use
with Liebert transfer switches or dual-input PDUs)
n Excellent efficiency powering non-linear, unbalanced
and crest loads
n Small footprint in a full-featured system
n Exceptional overload and transient performance
n All DSP-controlled UPS
n Easy-to-read screen and navigation menu on a
large LCD display
n Superior battery algorithms used to minimize operation
of batteries and include self-test and temperature
compensated charging
27
En
terp
rise U
PS
28
LIEBERT SERIES 610
ULTIMATE RELIABILITY FOR LARGE-SCALE, MISSION-CRITICAL
APPLICATIONS
The operation of the Liebert Series 610 UPS can be monitored using
n Liebert MultiLink® AutomatedSystem Shutdown Software
n Liebert Nform™ MonitoringSystem
n Liebert SiteScan® WebComprehensive Facility Monitoring System
n Liebert Universal Monitor andRemote Power Monitor Panels
n Third-Party Monitoring Systemsn Liebert BDS-40 Battery Monitoring
Alber Technology By Liebert
For more information, see pages 42 and 43.
Liebert Power Monitoring Capabilities
Other features include:n Higher DC bus utilization provides higher AC/AC and
DC/AC efficiency and allows a relatively smaller battery.n Continuous improvement dramatically improves
reliability by reducing the number of parts—and the
potential points of failure within the system. n Lower operating costs and long life thanks to 93%
operating efficiency and an industry leading power
factor of greater than 0.92 for all models.n The ability to handle unbalanced and 100%
non-linear loads.n Lower heat output eliminates the need for complex
air cooling arrangements. n Robust inverter manages overloads and faults without
the need for a static switch on the system output.n Designed for intuitive, menu-driven operation, a large
backlit LCD operator interface displays system controls,
full-featured monitoring and alarm notifications.
Offering the ultimate in power protection efficiency and reliability for larger facilities, Liebert
Series 610 UPS systems are available in a wide range of capacities from 100 kVA to 1000 kVA.
These systems are designed to protect mission-critical operations from the full range of power
quality problems and outages.
Efficient IGBT (insulated gate bipolar transistor) technology is combined with pulse width
modulation/stepwave topology to provide reliable operation and create a unit that packs more
capacity into a smaller footprint.
Thanks to all-digital controls and a unique inverter topology, the Series 610 can be applied
in several single-bus configurations, including single module, parallel redundant and isolated
redundant systems. For added reliability, multiple units can be utilized in a dual-bus system
with two power feeds to provide redundancy during normal operation, as well as continuous,
shutdown-free operation when service is required.
System benefits includen The compact, lightweight, and reliable Liebert FS
flywheel system is safe and environmentally friendly.n Offers a low installation cost, small footprint, low
maintenance and long operating life.n Unlike batteries, the Liebert FS uses no toxic metals
and emits no explosive gases.n Provides quick recharge, operates under a wide
range of temperatures.n Patented safety system provides a safe shutdown
under all circumstances.n When used with batteries, becomes the primary
DC energy source of more than 98% of power
disturbances (most power disturbances last less
than 4 seconds), reserving the battery for longer
outages, extending battery life and improving
overall UPS output reliability.n When used in a batteryless configuration, provides
the needed short-term DC energy bridge to an
engine generator.
29
En
terp
rise U
PS
LIEBERT FS FLYWHEEL SYSTEM
RELIABLE RIDE-THROUGH ENERGYSTORAGE, WITH OR WITHOUT BATTERIES
The Liebert FS flywheel DC energy storage system is designed to be a more efficient and
reliable alternative to standard battery systems used with uninterruptible power supply (UPS)
systems. The advanced, high-RPM, composite flywheel technology used in the Liebert FS
provides 190 kW of instant ride-through DC power and voltage stabilization for approximately
10 seconds—more than enough for the vast majority of electrical disturbances.
The Liebert FS can be used as the sole back-up DC energy device or in conjunction with
conventional battery strings or generator sets. When used along with batteries, the flywheel
system will eliminate their use for short power fluctuations, helping to extend life and save
capacity for longer outages. It can also be used alone to provide ride-through power until
back-up generators come on line.
The Liebert FS is engineered to support larger Liebert UPS systems, including the Liebert
Npower and Liebert Series 610 models. A single flywheel can be sized to support UPS systems
up to 225 kVA. Multiple flywheel systems can operate in parallel to support larger systems.
P OW E R F U LSO LU T I O NS FO RC R I T I C A L DATAA N D T E L ECO M A P PL I C AT I O NS
DC
Po
we
r Sy
stem
s
30
From major switching and data centers to remote shelters and computer rooms,Emerson Network Power DC power systemshave the performance and features tomatch your network application needs.
A Brilliant Combination Of Technology And Real-World Capabilit y
The Emerson Network Power line of DC power
systems demonstrates unparalleled reliability
and industry-leading MTBF ratings. It includes
power-factor corrected, AC/DC switch mode
rectifiers, operating at 48 and +24 VDC. Emerson
Network Power rectifiers—the heart of the power
system—possess some of the highest power
densities and smallest footprints in the business.
These power solutions can be further enhanced
with the addition of intelligent controllers,
remote system monitors, battery management
units and a full range of distribution modules.
Emerson Network Power DC PowerSolutions Are Ideal Forn Central Office n Computer Roomn Data Centern Enterprise (PBX, LAN)n Network Closetn Outside Plant: Broadband, Access and Wirelessn Radio Base Station / Microwave Siten Wireless and Wireless Access
Business-Critical Continuity For Communications
31D
C P
ow
er S
yste
ms
NterpriseIP™ Solution
Emerson Network Power offers a complete range of power systems to meet the energy capacity needs of any dataor telecom application. To view our complete DC Power catalog, visit EmersonNetworkPower.com/DCPower.
Medium DC Power Systems - 240VAC Single PhaseModular, flexible design for switching, wirelessbase stations, transmission, LAN, WAN and othernetworking operations.
AC powered DC UPS for VoIP and PoE applicationsn Pre-engineered, space saving, high
efficiency solution with flexible ordering configurations
n Easy to install and configure n Plug-n-play integrated cabinet design n Redundant architecture provides
six nines availabilityn Major components hot swappablen Easily expands for future growth
Small DC Power Systems 120 / 240VAC Single PhaseHighly reliable, uninterruptibleand cost-effective powersystems for small data ortelecom installations.
Mini DC Power Systems 120 VAC or 220/240VAC Single FeedHigh-density mini-sized DC power solutions for outside plantenclosure, central office or embedded applications.
LORAIN® VPS486000 / 246000 Modular powersystem providing upto 6,000 amps ofpower for -48VDC or+24VDC systems
Large DC Power Systems 208/480VAC 3 PhasePower systems for data center and centraloffice applications, including wireline andwireless switching, transmission, datarouting and large telecom hotels.
NetSure™ 701Modular powersystem providingup to 4,000 ampsof power at -48VDCwith 3200 wattPCUs
Candeo™ CSP 48300 Candeo™ CSP 24300Modular 23” rack-mount -48VDC or +24VDC powersystems up to 300 amp
LORAIN® PS 4810000 (LPS) Integrated -48VDC 3 phase PCUs, distribution,control and monitoring in a single frame.Expandable to 10,000 amps with additionalframes.
LORAIN®‚ XP 48450 / 48500 (LXP) Compact expandable -48VDC from25 to 425 amp for 19” or 23” rackmount applications withintegrated battery management
LORAIN® XP (LXP) 4870 / 4890 Builds upon the LXP 48500platform, bringing internaldistribution to the existing highcapacity yet compact 2RUpower shelf platform
NetSure™‚ 201 NMFB Integrated power shelf holdsup to six 400 or 800 wattrectifier modules in a 23”shelf solution, combiningspace efficiency and reliablerectifiers with an optimizedcontroller
NetSure™‚ 201 NNFB Integrated power shelf holdsup to two 400 or 800 wattrectifier modules in a 19” or23” shelf solution, combiningspace efficiency and reliablerectifiers with an optimizedcontroller
LORAIN® CIP 4890 & 48120Complete -48VDC system inone 19” or 23” rack-mountshelf with integrateddistribution for mini to small-sized power applications thatrequire up to 6,000 watts
LORAIN® IS 21000Modular invertersystem Grows with3.5kVA up to 21kVA
LORAIN® DB 48500 Thismodular systemprovides effectivesecondary loaddistribution for single ormultiple -48VDC feeds.LORAIN® Monitoring System —
LMS1000 This low profilemodular design withinput/output (I/O) networkingcapability and a fully integratedEthernet port sets a newstandard in the industry.
LORAIN® DB 484800Battery DistributionFuse/Circuit Breaker Bayfeaturing high capacity,front access, modularity,and simplified installation toeffectively providesecondary load distributionand protection for multiple -48 VDC feeds up to 600amps.
LORAIN® IS 6000Inverter System Compact modulardesign offersexpansion in 1kVAup to 6kVA
LORAIN® IS 3000Inverter System Stand alone rackmounted designoffers expansion in1kVA up to 3kVA
Inverter Systems120VAC and 230 VAC Single PhaseIdeal for a data center, wireless switching, orcentral office environment where flexibleexpansion capabilities are required.
DC Power Distribution Equipment
Monitoring Batteries &AccessoriesProducts frequently usedtogether with DC powersystems includingbatteries, battery strands,battery trays, bus covers,assorted panels, circuitbreakers and much more.
Enclosure SolutionsCustom designed or standard enclosures available for all types of dataand telecom equipment.
DC POWER SYSTEMS
EMERSON NETWORK POWER HAS A DC POWERSOLUTION FOR EVERY SIZE REQUIREMENT
Producing quality power is the first step—getting it to critical equipment in themost efficient manner while maintainingproper voltages and other key parametersis the important next step.
Making Sure The Power Is Always There When You Need It
Liebert’s range of power distribution
equipment is specially designed for
high-availability applications. It
includes both distribution and
switching systems to provide reliable
power to critical loads.
Liebert Power Distribution Solutions Are Ideal Forn Large-Scale Computer Centersn Facility-Wide Networksn Large-Scale Telecommunications Centersn Colocation Facilitiesn Internet Data Centersn Server Farmsn Data Warehousesn Network Management Centersn Medical Imaging Equipmentn Test and Laboratory Facilitiesn Industrial Process Control Operations
Po
we
r Distrib
utio
n S
yste
ms
32
POWER WHENAND WHEREYOU NEED IT
LIEBERT FDC
As your rack-based systems grow in number,
complexity and criticality — so must your
power distribution system. To meet this
challenge Liebert has created a product
designed to optimize power distribution at
the rack level with the “plug and play”
flexibility that today’s IT managers demand
from their systems. The Liebert FDC
distribution cabinet extends the functionality
of the PDU by packaging 168 poles in a stand-
alone cabinet with a rack foot print. Any
compartment can be serviced or reconfigured
without exposing the wiring of the other three
panelboards.
The standardLiebert FDCunit includes:n 4 complete
panelboards with
main breaker
(total 168 poles).n Front and rear
access only.n Bottom cable exit.
Optional features include:n Top cable exit.n 22kAIC main panelboard breakers.n Enhanced monitoring with remote
communications — Modbus output.n Isolated ground bus bars.n EZ-view doors enable visual inspection of
the breakers without unlocking the cabinet.n Square D or GE inline panelboards in bolt-in
or plug-in styles.n Current monitoring panel.n Tie-breakers to allow connection of two
panelboards to a common panelboard main
breaker (requires side access).n Plug-in main panelboard breakers.
33
Po
we
r Distrib
utio
n S
yste
ms
LIEBERT REMOTE DISTRIBUTION CABINET (RDC)
THE BETTER WAY TO WIRE HIGH DENSITY FACILITIES
The influx of client/server rack equipment is changing the content of data centers. There are more devices than
before—and they consume less power than their predecessors. As a result, most power distribution units (PDUs)
run out of circuit breaker poles before they run out of rated capacity. The Liebert Remote Distribution Cabinet
(RDC) extends the functionality of the PDU by packaging 168 poles (four complete 42-pole inline panelboards)
in a stand-alone cabinet.
Unlike standard Liebert Precision Power Centers (PPCs), the RDC has no internal isolation transformer and
requires 4-wire-plus-ground input from a PPC or other transformer. By separating the PPC transformer from the
panelboard function, Liebert was able to create an extremely compact package that fits the area of a standard
24” x 24” raised-floor tile.
The individual panelboards inside the Liebert Remote Distribution Cabinet can receive power from different
sources. This enables the RDC to provide fault-tolerant, fully maintainable dual-bus power to nearby load equipment.
A dual-input RDC can be configured with two panelboards on each side sharing common input terminals.
Other Features Of The Liebert RDC :n Unobstructed wiring access for ease of installation
n Complete isolation and maintainability
n Optional clear door insert panels enabling visual inspection
of the breakers without unlocking the cabinet
n Optional adjustable accent panels to make it easier to
compensate for breaker “creep”
n Single, dual or four-input configurations
n Optional current monitoring panel
n Optional input junction box and underfloor conduit box
n UL and CE compliant and labeled
Conduit-landing plate,above, is positionedfor easy cable access.Underfloor junction, inset,above right, is standardfor 4-input models andoptional for others.
34
Liebert Precision Power CenterThe Liebert Precision Power Center (PPC) power
conditioning and distribution cabinet is designed to bringyou a distribution system that offers the benefits of acustom-tailored power system, with the convenience andcost savings of a pre-packaged, factory-tested unit. Housedin a single, self-contained cabinet, it combines distribution,computer-grade grounding, isolation, and powermonitoring to provide the protection your vital computeror communications equipment demands. Available in 15-225 kVA capacity systems for raised floor applications and15-150 kVA capacities in top-exit models for non-raisedfloors, the Liebert PPC offers flexible expansion capabilitiesto fit growing sites.
The packaged system concept of the Liebert PPC isconvenient and space-saving, reducing installation timeand cost compared to a conventional approach usingmultiple interconnected components.
Other Standard Features Of The Liebert Precision Power Center :n Secure distribution and circuit identificationn Non-linear load compatibilityn Individual circuit breaker protectionn Built-in metering and alarm annunciation, with
communication to Liebert-centralized monitoring systemsn Easy installation, with single input cable connection
and application matched connections to the loadn Expandable with add-on panelboards and flexible cablingn Flexibility to protect your investment by allowing the unit
to be easily relocatedn UL and CSA Listed as a complete system
Liebert FPCThe Liebert FPC power conditioning and distribution
cabinet provides higher quality, more flexible powerdistribution for high-density data centers. It is engineeredto combine the convenience and cost savings of a pre-packaged, factory-tested unit with the flexibility of acustom-tailored power system. This self-contained systemprovides power isolation, power distribution, computer-grade grounding and power monitoring.
Ranging in capacity from 15kVA up to 300kVA, theLiebert FPC comes in a 19” rack and 47” wide rack, the sizeof two 19” racks, and is designed to fit at the end of, orwithin, a row of racks, as well as in a standaloneconfiguration.
The packaged system approach of the Liebert FPC isconvenient and space-saving, reducing installation timeand cost compared to a conventional approach usingmultiple interconnected components.
Other Standard Features Of The Liebert FPC:n Computer-grade groundingn Fully compatible with the non-linear loads n Main input breaker with shunt tripn Double-shielded isolation transformer n One or more individually enclosed 42-pole output
panelboardsn Built-in metering and alarm annunciation with
communication to Liebert centralized monitoringn Compact single cabinet conserves valuable floor spacen Single input cable connection reduces installation time
and costn Full front and rear accessn Can be easily relocated to protect your investmentn UL and ULc Listed as a complete system
LIEBERT PRECISION POWER CENTER — LIEBERT PPCLIEBERT FPC
PACKAGED POWER DISTRIBUTION FOR HIGHERPOWER QUALITY
The operation of the Liebert Precision Power Center and Liebert FPC canbe monitored using
n Liebert Nform™ Monitoring Systemn Liebert SiteScan® Web Comprehensive Facility Monitoring Systemn Liebert Universal Monitor and Remote Power Monitor Panelsn Third-Party Monitoring Systems
For more information, see pages 42 and 43.
Liebert Power Monitoring Capabilities
35
Po
we
r Distrib
utio
n S
yste
ms
LIEBERT SMARTSWITCH®
A SWITCHING SOLUTION FOR RELIABLE,REDUNDANT AC POWER
A Convenient Point-Of-Use Transfer Switch For A Variety Of Applications Requiring Reliable Dual AC Switching,
If your critical electronic equipment requires the reliability and continuous operation provided by dual power
sources—without tolerance for even scheduled downtime—Liebert has the solution. The Liebert SmartSwitch is
a convenient point-of-use transfer switch that provides rapid switching between two independent AC power
sources, for uninterrupted operation of critical electronic equipment.
It automatically transfers from the failing power source to the alternate source immediately upon detection
of a problem—typically within six milliseconds. The proven power switching technology of Liebert SmartSwitch
allows dual AC power paths all the way up to the critical load for the ultimate in AC power system redundancy,
power availability and fault tolerance.
Other Features Of The Liebert SmartSwitch:n Fast switching between two AC power sources makes
power transfer time invisible to your protected equipment
n Manual and automatic transfer capability
n Selectable preferred input source without rewiring
or load shutdown provides application flexibility and
facilitates load balancing
n Integral maintenance bypass to both input sources
for servicing convenience
n Hot-swap electronics allow module replacement
without load shutdown
n Switched neutrals maintain isolation of the separate
power sources and simplify grounding
n Break-Before-Make switching eliminates connecting
together of the independent power sources, even
under faulted conditions
n Diagnostics and transfer tests detect potential switch
failures before the problem becomes critical
n Output receptacles are available to match your load
specifications, simplifying system installation
n The enclosure may be placed under a raised floor, mounted
on a wall or used in a rack, based on your site needs
n ETL Listed to UL Standard 1008 for safety
n CE marked, complies with EMC and low voltage directives
The operation of the LiebertSmartSwitch can be monitored using
n Liebert Universal Monitor andRemote Power Monitor Panels
For more information, see pages 42 and 43.
Liebert Power Monitoring Capabilities
Liebert SmartSwitch includes manual transfer test capability toassure continued proper operation.
The unit is available with your choice of receptacles and connector, simplifyinginstallation and setup.
LED indicators provide at-a-glance operating status.Eight output contacts are available for remote status indication. RS232 ASCII communications port allows setpoint control and remote monitoring.
Hot swappable electronicsmodule and bypass featureallow your protected equipment to remain up and running, even when theSmartSwitch is being serviced.
36
LIEBERT STATIC TRANSFER SWITCH2™
THE KEY TO HIGH-AVAILABILITY POWERThe Liebert Static Transfer Switch2 (STS 2) provides an automatic, seamless transfer between the outputs of two
independent UPS systems and the input of a critical load in a dual-bus power system. If the primary UPS should fail,
the switch will automatically transfer the loads to the surviving UPS. For redundancy, the Liebert STS2 features three
separate, self-correcting logic modules. Each controller is capable of working independently and each helps monitor
the other two. Available in capacities ranging from 100 up to 1000 amps.
True Front-Access DesignAll mechanical and electronic components of the
Liebert STS2 are accessible from the front of the unit.
This gives you several immediate benefits:n Greater freedom in system design. The Liebert STS2 can
be placed adjacent to or in back of other equipment.
It can also be placed against a wall or partition.n Simplified installation, with ample space for cable
connections through top and bottom access platesn Less floor space required for maintenance access.n Simplified maintenance, with all key components
visible, serviceable and removable from the front
of the unit, without the need to shut down the
connected load.
True Internal RedundancyThe Liebert STS2 has triple-redundant logic. Each DSP
controller is capable of working independently, and each
helps monitor the other two. If one malfunctions, the other
two lock it out. Each controller has power feeds from both
power supplies.
The two power supplies feature true dual-bus power
distribution. Both have dual inputs, one from each AC input
source. All power connections have diode protection, so
that internal or external faults cannot propagate. The result
is a rugged, fault-resilient package that is optimized for
real-world applications.
Easy-To-Use Color Touch-Screen InterfaceThe controls of the Liebert STS2 are
intuitive and simple. The pop-up menus areeasy to understand and provide a wealth of operational and diagnostic information.
The color LCD monitor is divided intothree segments. In addition to a systemmimic diagram, there is a status/alarmpanel and a section dedicated to operatorinstructions and menus. You benefit from improved operator effectiveness,reduced training time, and less chance of operator error.
Other Features Of The Liebert Static Transfer Switch2:n Internal CANBUS protocol provides
high-bandwidth communication between
system components via twisted-pair cables.
Options can be added as simple network nodes
n Internal dual-bus control power
n Simplified installation and maintenance
n Full range of communications options to fit
any monitoring strategy
n Three-pole switch configurations
37
Po
we
r Distrib
utio
n S
yste
ms
The operation of the Liebert StaticTransfer Switch2 can be monitored using
n Liebert Nform™ Monitoring Systemn Liebert SiteScan® Web Comprehensive
Facility Monitoring Systemn Liebert Universal Monitor and Remote
Power Monitor Panelsn Third-Party Monitoring Systems
For more information, see pages 42 and 43.
Liebert Power Monitoring Capabilities
With a single, space-saving unit, the Liebert Static Transfer
Switch2/Power Distribution Unit combines the switching
capabilities of the STS2 with the benefits of a proven power
distribution unit.
Liebert designed the STS2/PDU to bring you a distribution system
that will close the power delivery loop in your critical facility. It offers
the benefits of a custom-tailored power system, with the convenience
and cost savings of a pre-packaged, factory-tested unit.
Housed in a single, self-contained cabinet, it combines distribution,
computer-grade grounding, isolation, and power monitoring, as well
as dual-source switching, to provide the protection your vital computer
or communications equipment demands.
Available in capacities from 250 to 800 amps, the Liebert STS2/PDU
offers flexible expansion capabilities to fit growing sites. The packaged
system approach of the Liebert STS2/PDU is convenient and space-saving,
reducing installation time and cost compared to a conventional
approach using multiple interconnected components.
Features of the LiebertSTS2/PDU include:n True dual-bus power distribution
switches automatically or manually
between two AC power sources.
n Computer-grade grounding
automatically establishes a single
point ground to meet major
manufacturers’ recommendations
and the requirements of the
National Electric Code.
n Fully compatible with the non-linear
loads of modern computer systems
and other electronic equipment.
n Built-in metering and alarm
annunciation with communication
to Liebert SiteScan® Web centralized
monitoring.
n Compact single cabinet conserves
valuable floorspace compared to
non-packaged solutions.
n Single cabinet design reduces
installation time and cost.
n The unit can be easily relocated to
protect your investment.
n UL Listed as a Complete System to
meet safety requirements for fast,
hassle-free inspection and building
code approvals.
n A choice of distribution options to
fit site requirements.
STS2/PDU COMBINESPOWER DISTRIBUTIONAND AUTOMATICSWITCHING
38
P OW E R Q UA L I T YSO LU T I O NS
Su
rge
Su
pp
ressio
n A
nd
Po
we
r Co
nd
ition
ing
Sy
stem
s
For applications requiring protection from electrical line problems without the need forback-up capability, Liebert manufactures a full line of surge suppression and power conditioning equipment.
The Best Possible PowerLiebert’s wide range of transient voltage
surge suppression (TVSS) products has
numerous applications throughout a facility,
including protection against transients that
are generated by other equipment within
the building. Our power conditioning
systems shield critical loads from external
disturbances, particularly those coming
through the utility power line.
Liebert Power Protection Solutions Are Ideal For:n Computer Centers
n Facility-Wide Networks
n Telecommunications Centers
n Colocation Facilities
n Internet Data Centers
n Network Management Centers
n Medical Imaging Equipment
n Test And Laboratory Facilities
n Industrial Operations
LIEBERT LARGE-SCALE SURGE PROTECTION
HIGH QUALITY SURGE PROTECTION
39
Su
rge
Pro
tectio
n A
nd
Po
we
r Co
nd
ition
ing
Sy
stem
s
AccuVar—A full line of multi-phase,
multi-mode distribution panel-mounted surge
suppression devices.
Hybrid Advantage—The first hybrid product
in the industry to offer a true coordinated
multi-stage system of suppression. Surge current
capacity ranges from 100 kA to 400 kA per phase.
Interceptor II TVSS Series—Built to provide the
highest level of surge current capacity, with the
lowest clamping voltages. Along with true NEMA
4 assembly suitable for outdoor use.
Interceptor ATF Series—A customized, modular
approach to surge protection in a series filter
device. The Interceptor Series utilizes MOV
(metal-oxide varistor) technology.
LM Series—Offers continuous protection from
damaging transients and electrical line noise,
and it has the industry’s highest surge current
repeatability. Surge suppression levels range
from 50 kA to 400 kA per phase.
Type SS—Approved by Motorola R56 Committee,
Standards and Guidelines for Communication
Sites—Type 1 and 2 Devices. Utilizes advanced
SAD/MOV array technology for industry leading
transient suppression voltages. Up to 160 kA surge
current capacity for increased reliability.
PanelGuard Extension—An add-on device for
integration with panelboards at the jobsite for
enhanced surge suppression. Surge current
capacity levels range from 130 kA to 200 kA
per phase.
Specialty Surge—is designed for data line,
telecommunications and other
specialty applications.
Liebert manufactures the industry’s widest range of transient voltage surge suppression (TVSS) equipment. These
products are ideal for small facilities, large equipment rooms or entire buildings. Plus a wide range of power, control and
data line applications. Each surge protection product features the rugged reliability that has been Liebert’s trademark
for more than 30 years.
Installing protection at the electrical service entrance, distribution points, branch panelboards and on specific sensitive
loads or equipment throughout your facility is the best way to prevent damage and eliminate associated downtime to
sensitive microprocessor-based electronics.
Islatrol® SP-6TVN Series—The Islatrol® SP-6TVN is a surge suppressor/filteringdevice that features uniquely designedrepositionable outlets and protects sensitive home/office equipment including home theaters, satellite dishes,computers, printers and faxes.
Islatrol® Rackmount Series—This line of ACsurge protectors is ideal for protecting thepower feeding valuable rack equipment. This series provides 40,000 Amps of surgeprotection and up to 60 dB of high-frequency noise filtering.
Edco Rackmount Series—The Edco RM-CAT6-16R is a 16-channel high-speed dataline protector that utilizes a three-stagehybrid design technology. Ideal for networkswitches and hubs, the Edco RM-CAT6-16R iseasily mounted in close proximity to the protected equipment.
Edco PC642 Series—The Edco PC642 Seriessurge suppressor is a two-pair (four-wire)module implementing three-stage hybridtechnology. This module addresses over-voltage transients with gas tubes and silicon avalanche components.
Edco LCDP Series—The Edco LCDP Series isdesigned to conveniently protect 8 wire, lowvoltage data circuits and employs two RJ-45jacks for easy installation.
Edco RJA-RJD Series—The Edco RJA and EdcoRJD Series are four pair telephone/data lineprotectors that implement advanced twostage hybrid design.
Edco CAT6-5 POE Series—The Edco CAT6-POE Series is designed to work on Category 5 Power-Over-Ethernet transmission lines aswell as Category 6 applications.
These Products Include:
The operation of the LiebertDatawave can be monitored using
n Liebert Nform™ MonitoringSystem
n Liebert SiteScan® WebComprehensive FacilityMonitoring System
n Liebert Universal Monitor andRemote Power Monitor Panels
n Third-Party Monitoring Systems
For more information, see pages 42 and 43.
Liebert Power Monitoring Capabilities
LIEBERT DATAWAVE® MAGNETIC SYNTHESIZER
THE COMPREHENSIVE POWER CONDITIONING SOLUTION
Liebert Datawave Offers ManyOther Features:n Input voltage range exceeds ±40% to maintain
consistent power output quality even during
deep sag conditions
n Regenerated output waveform, immune to
input transients, distortion and noise
n Combines power conditioning, monitoring
and flexible output distribution from a single
factory tested unit
n Can be paralleled for additional capacity or
to provide redundancy
n Handles non-linear loads and high neutral
current without oversizing
n Can be paralleled for additional capacity
or redundancy
Liebert Datawave magnetic synthesizer makes a critical system virtually invulnerable to any form of power
distortion or disturbance except a total outage. The Liebert Datawave synthesizes and cleans three-phase output voltage,
regardless of input quality, providing transient voltage protection and harmonics isolation, even with non-linear loads
and distorted input voltages. The Liebert Datawave can maintain three-phase output voltage even if one input phase
drops off completely.
Regardless of the quality of input power, the Liebert Datawave generates a stable output waveform to distribute to
your sensitive electronic equipment. The self-contained system can be used to condition utility power, distribute it to
sensitive electronics and monitor power parameters. Systems are available from 15-200 kVA.
Integral PowerMonitoring PanelProvides comprehensivemetering and alarms forsystem power parameters
40
41
Su
rge
Su
pp
ressio
n A
nd
Po
we
r Co
nd
ition
ing
Sy
stem
s
LIEBERT ISOLATION TRANSFORMER
PACKAGED ISOLATION AND SURGE SUPPRESSION FOR SENSITIVE ELECTRONIC
SYSTEMS
Enhance the quality of your power distribution system with the Liebert Isolation Transformer. This packaged system
reduces common mode noise, while the internal surge suppression system minimizes high energy transients and normal
mode noise that can disrupt the operation of your sensitive electronic equipment. The Liebert Isolation Transformer
enhances conventional building power distribution systems, non-raised floor applications and electronic office systems
to improve power quality to a variety of equipment and applications. Available in sizes ranging from 15-300 kVA.
Other features of the LiebertIsolation Transformer:n Superior common mode noise attenuation of
140 dB is achieved with double-shielded copper
isolation transformersn Suppresses high-speed, high-energy transients
and high-frequency noise in the normal moden K-rated transformers available for additional
non-linear load capabilityn Voltage compensation taps allow compensation
of +5% to –10% without deratingn Establishes a single point ground for proper
computer operationn High quality, all copper windings provide high
efficiency and long service life
42
What You Don’t Know Can Hurt You A small problem in a critical facility can quickly
escalate into a disaster—knowing what is happening
with your power equipment, so you can keep that
protective “envelope” at peak operating efficiency, is
vital to system reliability.
Different People Need To KnowDifferent Things
Liebert offers you more monitoring solutions than
anyone else because getting the right information about
your power equipment to the right people—with the right
level of urgency—is so important to system availability.
We do this by allowing you to receive and use
information from your Liebert power equipment’s
microprocessor controls…no matter where it is located
or what communications protocol, operating platform
or building management system is being used. In-band,
out-of-band and web-based monitoring are all available.
From enterprise monitoring systems to individual pieces
of communications hardware, you will know the exact
problem so that you can implement the right solution.
POWER SYSTEM MONITORING: THE KEY TOCONTINUOUS OPERATION
How Deep Does Your MonitoringNeed To Be?
Monitoring can range from a automated shutdown
software that provides basic operating information
from a single UPS unit—all the way to full-scale
monitoring and control of a critical facility including
trending and data analysis.
Your requirements will vary according to the
specificity of the information you need. You may
require no more than a local readout of a unit’s
operating status. Or you may need the ability to
control its operation and receive alarms.
These information requirements may also go
beyond basic monitoring and control. You may need
the ability to analyze performance data in order to
pinpoint trouble spots so that the same problems
don’t happen again and again.
MAXIMIZING YOUR INVESTMENT THROUGH ADAPTIVE MONITORING
Distributed Managementwith Liebert IntelliSlotInterface CardsFor enchanced remote communicationsand control of your Liebert units, the Liebert IntelliSlot Web and 485Cards deliver the communicationcapabilities you require.
Monitoring and control throughyour existing Network with noadditional software required.
Each Liebert system equipped with anLiebert IntelliSlot Web Card takes fulladvantage of your Ethernet network,allowing remote monitoring fromyour computer desktop, networkoperations center or wherever networkaccess is permitted, without the needfor front-end software.
Monitoring integration withyour existing BuildingManagement System.
A Liebert system equipped with aLiebert IntelliSlot™ 485 Card can beseamlessly integrated with yourexisting Building ManagementSystem.
Centralized Managementwith Liebert Nform®
SoftwareAs business grows, your criticalequipment infrastructure willexpand, thus the need for centralizedmanagement of this equipment will be key to your business success.Connecting to equipment in thedistributed critical space is only part of the monitoring challenge.
Liebert Nform leverages the network connectivity capabilitiesof your Liebert equipment to provide a centralized monitoringview of your distributed equipment.
Utilizing the SNMP and Web technologies built into each of theLiebert IntelliSlot communicationcards, Liebert Nform will centrallymanage alarm notifications toprovide you with an easy interfaceto access critical status information.Liebert Nform puts critical systems information at the fingertips of support personnel—wherever theyare—increasing responsiveness to alarm-event conditions, thusallowing IT organizations to maximize their system availability.
Liebert SiteScan Web
Enterprise Managementwith Liebert SiteScan®
Web SoftwareFor customers who require extensivemanagement of critical systemequipment that may span multiplelocations in an ever-moving globalenterprise, Liebert SiteScan Web will centrally manage your criticalequipment and give you the power to move beyond the event-responsiveservice paradigm.
Liebert SiteScan Web does it all —
Real-Time Monitoring and Control
Event Management and Reporting
Data Analysis and Trending
Building Management Integration
Liebert SiteScan Web is acomprehensive critical systemsmanagement solution dedicated toensuring reliability through graphics,event management and dataextrapolation. The standard Webinterface allows users easy access from anywhere at anytime.
Single and multi-site applications.Event management and unit control.Trend and historical data capturesand reporting.Full ASHRAE BACnet compatibility.Java based.Windows 2000, XP and 2003 compatible.
Liebert Nform
Liebert IntelliSlot Web
Mo
nito
ring
43
Making Sure You Always Get The Right Solution
There are many places where Liebert equipment is vital—
such as computer rooms, telecommunications centers,
high density Internet hosting sites, colocation facilities and
industrial control rooms. Our application engineers are
experienced in all of these situations and can make sure
you always get a power protection solution that is tailored
to your exact needs.
EXCELLENCE IN EVERY ASPECT OF DOINGBUSINESS…THAT IS THE LIEBERT EXPERIENCE
44
Doing Whatever It Takes To Meet The Needs Of Our Customers
Liebert has been safeguarding computer operations and
other critical facilities for over 35 years. No other company
in this business has a track record that is so solid. Everything
we do is focused towards you…the customer. The Liebert
design and manufacturing philosophy covers every aspect
of the product from advanced engineering…to providing
detailed equipment drawings…to manufacturing quality
in our ISO 9000—2001 certified production facilities…to
assuring on-time delivery.
It takes an innovative product, built to quality standards and properly specified to precisely meet each individual power protection application.
No one in the power protection industry offers you a broader range of solutions than Liebert. From one-on-one
protection for a single PC to full UPS coverage for an entire facility, we can help you develop the power solution
that is exactly right for your needs and your budget.
From our first meeting, Liebert’s goal is to help you solve your current and future power problems with a protection
plan that is designed specifically for your parameters. No overly simplified “out-of-the-box” answer can truly provide
optimum protection for complex computing and communications systems.
30 yearsover
100 countriesover
45
A Strong Local PresencePurchasing from Liebert is different from what you
might experience with other companies that sell power
protection products. Your local Liebert Representative,
Distributor or Reseller is your direct connection to our
full complement of critical power solutions. You can
always be sure that you are dealing with someone who
knows the answers and is fully capable of implementing
them on your behalf.
Someone There To Help Keep You UpAnd Running
After you purchase your Liebert power protection
product, there will always be someone you can talk to
who will answer any questions or operational problems
you may have. Through Liebert Global Services, we are
committed to providing comprehensive service training
programs to all of our service engineers and technicians.
It’s important to know that whether it’s scheduled
preventive maintenance…or an emergency situation,
service support will be quickly and expertly handled.
A Company You Can Count On…Year After Year
With your purchase of a Liebert power product, you
are aligning yourself with an organization that has a
reputation for quality that is second to none. The
Liebert name is recognized around the world. It is
synonymous with reliability. Our customer base includes
most of the world’s major corporations, institutions and
government agencies.
But, most importantly, your Liebert product provides
significant value—a product that continues to pay
dividends with year after year of reliable operation.
We also help lower your overall cost of ownership by
delivering cost-effective support with tools such as our
extensive online information resources, toll-free product
help lines, training programs and other capabilities.
Commitment to
Quality
35,000 customersover
46
SERVICING ALL OF YOURCRITICAL POWER EQUIPMENT
We Have The PartsTo make sure the job gets done when it needs to, we have
the most factory-certified parts—and the most
sophisticated logistics system—to get them wherever
they’re needed. You won’t wait on parts to get your system
up and running, because nearly 100% of emergency parts
orders are delivered in less than 24 hours.
The power equipment we service includes:n All UPS and Batteries
n Automatic Transfer Switch
n Static Transfer Switch
n System Control Cabinets
n PDUs
n Bypass Cabinets
nPower Conditioning & Distribution
Your power equipment functions as a complete system.
Shouldn't your service provider? Only Emerson Network
Power has the expertise and experience to service your
entire power infrastructure and all its components-from
utility to rack.
We Have The ResourcesOur Customer Resolution Center supports you
24x7x365. It’s always staffed by knowledgeable people
who understand the technology and your equipment. No
messages. No answering services. We handle over
100,000 calls per year, and resolve them in an average
time of 2.5 minutes.
We Have The PeopleEmerson Network Power has the coverage and the
capabilities to get you through just about anything. We
have the most and the best factory-trained Field
Technicians in the industry — over 375 of them located
across the country. What’s that mean to you? Our average
onsite response time in 2006 was just 1.97 hours.
Your investment in power equipment is worthless if you don’t maintain it. Not even the best equipment can function
properly unless it’s serviced with a regular maintenance schedule.
Emerson Network Power services the complete spectrum of UPS, batteries and related power distribution equipment
in your data center or in other critical facilities where continuous availability of systems is essential.
Should downtime strike, no one can you get you back online more quickly than Emerson Network Power.
Liebert Integrated Racks And Cabinets —Protection Wherever It’s Needed
Rack-based equipment has formed the foundation of today’s
IT network. To house and protect these systems, Liebert offers
a complete line of rack, cabinets and integrated protection
enclosures for rack-mounted components. From open racks
employed in large data centers to self-contained, integrated
enclosures with cooling and power protection used in remote
locations, there is a Liebert rack solution for every application.
Monitoring Solutions From Liebert — The SmartDecision To Make
Liebert is the only source that supplies the protection
infrastructure and all the tools you need to know how it is
operating every minute of every day.
From one-on-one supervision of a single piece of equipment
to full-scale monitoring and control of several far-flung
facilities, no one knows more about what it takes to keep you
in the know about your critical systems than Liebert.
You Know About Our Complete Line Of Power Protection Solutions
A steady flow of power, and the means to get it to each piece
of equipment in a critical facility, is a key to systems reliability.
The proper functioning of these systems depends on the
quality of power and the ability to ride through outages of any
duration. Only Liebert offers the breadth of power supply
products to meet any of these needs.
Power availability solutions include uninterruptible power
supply (UPS) systems from 300 VA to over 1000 kVA.
Power protection products include surge protection and
power conditioning systems up to 300 kVA.
Power conversion and distribution systems for both AC
and DC power applications range from 15 kVA to 225 kVA.
Liebert Offers A Full Range Of Environmental Control Systems
From high-capacity mission-critical cooling systems — to
compact and above-ceiling units — to our targeted cooling
products designed for the demanding requirements of high
density electronic installations… there is a Liebert solution
designed to cool and protect your critical computing and
communications equipment. We make the industry’s widest
range of mission-critical environmental control, including air
conditioners, fluid chillers and heat rejection systems from 1.0
to more than 60 tons, in a variety of configurations and
cooling technologies.
Power Availability And Protection
Power Conversion And Distribution Monitoring And Communication
Integrated Racks And Cabinets
High Heat Density And Precision Cooling
Liebert: The World Leader In Mission-CriticalPower And Cooling Technologies
47
Emerson Network Power.The global leader in enabling Business-Critical Continuity™.
EmersonNetworkPower.com
AC Power
Connectivity
DC Power
Embedded Computing
Embedded Power
Monitoring
Outside Plant
Power Switching & Controls
Racks & Integrated Cabinets
Services
Precision Cooling Surge Protection
Liebert Corporation1050 Dearborn DriveP.O. Box 29186Columbus, Ohio 43229800 877 9222 Phone (U.S. & Canada Only)614 888 0246 Phone (Outside U.S.)614 841 6022 FAX
Via Leonardo Da Vinci 8Zona Industriale Tognana 35028 Piove Di Sacco (PD)Italy39 049 9719 111 Phone 39 049 5841 257 FAX
Emerson Network Power Asia Pacific7/F., Dah Sing Financial Centre108 Gloucester Rd, WanchaiHong Kong852 25722201 Phone 852 28029250 FAX
liebert.com
24 x 7 Tech Support800 222 5877 Phone614 841 6755 (outside U.S.)
Business-Critical Continuity, Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. ©2007 Emerson Electric Co.
While every precaution has been taken to ensure accuracy and completeness in this literature, Liebert Corporation assumes noresponsibility, and disclaims all liability for damages resultingfrom use of this information or for any errors or omissions.
© 2007 Liebert Corporation. All rights reserved throughout the world. Specifications subject to change without notice.
All names referred to are trademarks or registered trademarksof their respective owners.
® Liebert and the Liebert logo are registered trademarks of the Liebert Corporation.
SL-70100 (R11/07) Printed in USA
Ensuring The High Availability OfMission-Critical Data And Applications.
Emerson Network Power, the global leader in enabling business-critical continuity,
ensures network resiliency and adaptability through a family of technologies —
including Liebert power and cooling technologies — that protect and support
business-critical systems. Liebert solutions employ an adaptive architecture that
responds to changes in criticality, density and capacity. Enterprises benefit
from greater IT system availability, operational flexibility, and reduced capital
equipment and operating costs.
Recommended