Embla SLM version (Stabilizer less) CONFIDENTIAL · 2015. 12. 16. · Embla SLM version (Stabilizer...

Embla SLM version (Stabilizer less)

Main blades325mm carbon main blade.Used for both models.Piano wire added to prevent weightsflying away during crash.Black carbon base color with white line

Battery3S1p 2,100-2,500mAH Lipo batterynecessaryMaximum battery size should be under100mmX35mmX25mm

One piece moldedskid

SLM rotor headAll setup controlled from 3 axis gyro. Lesspower loss due to no flybar design. It givesenough power for 3D even with stock motor.Maximum pitch is +/- 16.3 Axis gyro required

TailTail rotor hub is made of alumimumand stainless steel for more strength.

Belt driveBelt from Japanese manufacturer used.The belt drive design is as durable andtrustable as any other Hirobo models.

Drive trainGear ratio 1:12.5:4.4Optimal ratio for 3D flight.CNC main gear, 11,13,14, and 15Tpinion gear will be available as optionparts

Carbon main frameMain frame made of better carbonmaterials. Hirobo original main framelayout for maximum 3D performance.

Linkage2 servo direct/single linkage, Aileronservo is push pull linkage with levers

Stabilizer barHarder material used.

SZM2 rotor head version (With stabilizer)

SZM2 rotor head　（Flybar version)Inheriting D3 / SDX design rotor head. Mixing armattached on blade holder. Just as previous models,wide range of different setting possible with usingdifferent setting holes. Maximum pitch +/- 13 to14.

Swash servo3 swash servo necessaryMaximum swash servo size should be under24mmX12mmX20mm(distance between mounting hole: 27～29.5mm)

Rudder servo1 rudder servo necessaryMaximum rudder servo size should be under37mmX17mm(distance between mounting hole :27～43mm)*There is no limit to height of rudder servo.

CONF

IDENT

IAL