Elsteel katalogforside 3 - RCL E-Technik...DNV - Det Norske Veritas LLOYD’S - 1st International...

Preview:

Citation preview

www.elsteel.com The best technical solution at the best possible price

MARINE SIMULATOR

ww

w.e

lsteel.c

om

ww

w.e

lsteel.c

om

INTRODUCTION

ELSTEEL MARINE SIMULATOR

Articulation of Ship Vibrations

Panel boards in ships are subject to vibrations from many different

directions, and sources.

Furthermore panels need to be in operation and be serviceable during

storms and high temperatures stemming from a combination of

engines and sometimes tropical weather.

ww

w.e

lsteel.c

om

ww

w.e

lsteel.c

om

The Marine Simulator designed by Elsteel is able to generate not only the

various vibrations from main engines, generators, compressors, thrusters

etc. but is also able to tilt the test object during these combined

frequencies!

Elsteel panel boards have also been type tested by IPH at 500C ambient

there by ensuring the suitability in engine room environment.

When you install an Elsteel panel board you are always sure that you have

chosen one of the best and most tested panels in the world!

ww

w.e

lsteel.c

om

ww

w.e

lsteel.c

om

STANDARDS & RESULTS OBTAINED

ww

w.e

lsteel.c

om

ww

w.e

lsteel.c

om

ISO - International Organization for Standardization

(ISO 6954 in 1984)

(ISO 2372, 2373, 3945) - old

(ISO 7919 and 10816 [6] and [7] ) - latest

DNV - Det Norske Veritas

LLOYD’S - 1st International ship noise and vibration conference

London, June 20-21,2005

VDI - Verein Deutscher Ingenieure

(The Association of German Engineers)

(VDI 2056, 2057 and 2063)

ABS - (American Bureau of Shipping Incorporated by Act of

Legislature of the state of New York 1862)

l Vibration in all directions is to be less that 10 mm/sec.

( rms velocity value )

l Frequency should lie between 0 - 1000 Hz.

l Usual practice is that with high-speed ships, flare angles of the

bow side shell and bulwarks are not to exceed angles of 40 to 45

degrees relative to the vertical.

(Normal value at rough weather, 2 30 degrees.)

l Panels are stable for 0-30 mm/sec. velocities.

l Panels can withstand frequencies in X Y Z directions

from 0-5000 Hz.

l Panels are stable for 0-30 m/s2 accelerations.

Tilting Angles

l At Slow Speeds 2 = 25 degrees

l At High Speeds 2 40 degrees

STA

ND

AR

DS

RE

SU

LT

S

ww

w.e

lsteel.c

om

ww

w.e

lsteel.c

om

FUNCTIONS &DEFINITIONS

ww

w.e

lsteel.c

om

ww

w.e

lsteel.c

om

Simulator functions,

l Wave Motion = Tilting of a Ship

l Main Engine = Main Driving Engine of a ship

l Vibrators = Other Machineries such as Compressors and Generators.

SOME DEFINITIONS.

FREE VIBRATION

Free vibration takes place when a system oscillates under the action

of forces inherent in the system itself, and when external impressed

forces are absent.

NATURAL FREQUENCY

Natural frequency is the frequency of free vibrations in Hz and is a

property of the dynamic system established by its mass and stiffness

distribution.

FORCED VIBRATIONS

Vibration that takes place under the excitation of external forces is

called forced vibration.

RESONANCE.

If the frequency of excitation coincides with the natural frequency of

the system, a condition of RESONANCE is encountered, and danger-

ously large oscillations may result. The failures of major structures are

encountered due to this theory.

ww

w.e

lsteel.c

om

ww

w.e

lsteel.c

om

TESTS

TEST PERFORMEDCERTIFICATION

AUTHORITYCERTIFICATE REFERENCE

Techno Module Panels Comply to IEC 60439-1

01. Full type test on 1600 A TM System with LS breakers ASTA 17011

02. Full type test on 1600 A TM System with GE breakers ASTA 16149

03. Full type test on 2000 A TM System with Siemens breakers ASTA 16783

04. Full type test on 2500 A TM System with LS breakers ASTA 17010

05. Full type test on 2500 A TM System with GE breakers ASTA 16150

06. Full type test rated 2500A with MG, ABB, Siemens, Jean Muller breakers

IPH 513.228.6.384

07. Temperature rise test & Short circuit test rated 2500A IPH 170.265.2.230

08. Full type test rated 3200A (Al Busbar) with ABB breakers CPRI S2060729

09. Temperature rise test & Short circuit test rated 3200A ASTA 12798

10. Full type test rated 4000A with Terasaki breakers IPH 1819.1206.5.668

11. Full type test rated 5000A with ABB & Jean Muller breakers IPH 1513.832.0.468

12. Temperature rise test & Short circuit test for 5000A ASTA 12890

13. Full type test rated 6300A with ABB breakers IPH 1819.1061.3.431

14. Full type test rated 7100A with ABB breakers IPH 1819.1061.3.434

15. Short circuit test 50kA/ 1sec for 1×10×40 Cu & 1×10×30 Cuand Power Cassette Unit

TCA 102602

16. Short circuit test 50kA/ 1sec for 2×10×40 Cu NATA 101740-1

17. Short circuit test 50kA/ 1sec for 2×10×50 Cu NEFI 1752

18. Short circuit test 50kA/ 3sec for 2×10×100 Cu ASTA 14902

19. Short circuit test 100kA/ 1sec for 4×10×150 Cu ASTA 15216

Techno Light Panels Comply to IEC 60439-1

20. Full type test rated 800A with LS breakers ASTA 17012

21. Full type test rated 800A with MG breakers ASTA 16899

Instant Panel Light Comply to IEC 60439-1

22. Full type test rated 400A with LS breakers ASTA 17013

ww

w.e

lsteel.c

om

ww

w.e

lsteel.c

om

TEST PERFORMEDCERTIFICATION

AUTHORITYCERTIFICATE REFERENCE

Techno Module Panels Comply to other Standards

01. Internal Arc Fault Test According to IEC61641 & AS/NZS

3439.1 : 2002TCA

102601

102380/

102378

02. Vibrations Test According to IEC68-2-6 & IEC68-2-36 VIPAC 302649-01

03. Seismic test According to IEC68-3-3 VIPAC 302649-02

04. Lloyd’s Register Type Approval Certificate for Marine,Offshore and industrial applications.

LLOYD’S

REGISTER02/70003 (E1)

05. ABS Type Approval Certificate for Shipboard and AssociatedMarine & Offshore installations.

ABS08-SG366750-

PDA

Box Enclosures

01 Certificate of compliance for Painted Steel Boxes andTerminal Boxes comply to UL 50 Type 4, 4X, 12 and CSA 94 Certificate of compliance for Stainless Steel Boxes and

Terminal Boxes comply to UL 50 Type 4, 4X, 12, 13 and CSA

94

CSA 227808

02. Degree of Protection Test (IPH) for Stainless Steel

Box enclosure

Test passed for IP 69K

IPH 1819.1575.7.61

9

03. Degree of Protection Test (IP Test) for Mild Steel Box enclo-

sure

Test passed for IP 65

UL 129169-02/A1

04. Degree of Protection Test (IP Test) for Stainless Steel Box

enclosure

Test passed for IP 66

DEMKO 93/53 BTh

05. Lloyd’s Register Type Approval Certificate for Marine,Offshore and industrial application of Stainless SteelEnclosures & 19” cabinets.

LLOYD’S

REGISTER02/70003 (E1)

06. ABS Type Approval Certificate for Shipboard and AssociatedMarine & Offshore installations.

ABS08-SG366750-

PDA

ww

w.e

lsteel.c

om

ww

w.e

lsteel.c

om

LLOYD’S CERTIFICATE

ww

w.e

lsteel.c

om

ww

w.e

lsteel.c

om

ww

w.e

lsteel.c

om

ww

w.e

lsteel.c

om

EUROPEElsteel UK - EnglandTel: ++44 197 885 5909Fax: ++44 197 885 5824Mail: sales@elsteel.co.uk

Elsteel Ltd. - PolandTel: ++48 77 465 4666Fax: ++48 77 465 4674Mail: elsteel@elsteel.pl

Elsteel Ltd. - IrelandTel: ++44 289 077 4041Fax: ++44 289 078 3197Mail: ghavlin@parkelect.co.uk

Envolventes Elsteel - SpainTel: ++34 95 567 5988Fax: ++34 95 567 5987Mail: josemanuel@elsteel_iberica.com

EFA Elektro AS - NorwayTel: ++47 6 681 2400Fax: ++47 6 680 0478Mail: geir.sogn@efa.no

RS Components Ltd. - EnglandTel: ++44 1536 20 1234Fax: ++44 1536 20 1501Web: www.rswww.com

BMC Manufacturing - IrelandTel: ++353 1 835 1744Fax: ++353 1 835 2359Mail: info@bmcmfg.ie

TMS GmbH - GermanyTel: ++49 4554 705 6500Fax: ++49 4554 705 6503Mail: info@technomodul.de

Kulik Telecom B. V. - NetherlandsTel: ++31 182 61 8777Fax: ++31 182 61 6064Mail: info@kulik.nl

Rafmidlun hf - IcelandTel: ++354 540 3500Fax: ++354 540 3501Mail: kolbeinn@rafmidlun.is

N. N. Control Panels Ltd. - CyprusTel: ++357 25 71 4816Fax: ++357 25 71 4415Mail: info@nncontrolpanels.com

Culic Elektro Centar - CroatiaTel: ++38 5 2120 4333Fax: ++38 5 2120 4343Mail: niksa@culicec.hr

Coelco Trade SRL - RomaniaTel: ++40 21 310 0961Fax: ++40 21 310 0959Mail: catalin.caciuleanu@coelco.ro

Elektra-Bree-Bordenbouw nv - BelgiumTel: ++32 8941 0041Fax: ++32 8941 0049Mail: koen.geebelen@ebbordenbouw.be

EUROPE - Contd.Alewijnse Panelenbouw B.V- NetherlandsTel: ++31 243 716 511Fax: ++31 243 716 510Mail: e.borren@alewijnse.nl

Montakon - Netherlands (Box Items)Tel: ++31 73 599 6000Fax: ++31 73 599 6060Mail: michiel.janssen@montakon.nl

Cebco Limited - Czech RepublicTel: ++420 604 645 648Mail: info@cebco.czMail: cebco@seznam.cz

UAB Electric Box - LithuaniaTel: ++370 45 580 242Fax: ++370 45 580 242Mail: saulius@electricbox.lt

AUSTRALIAIPD Group Ltd. - Australia & New ZealandTel: ++61 2 9645 0777Fax: ++61 2 9645 1608Mail: brian.rodricks@ipdgroup.com.au

MIDDLE EASTVoltamp Energy SAOG - OmanTel: ++968 2 444 9140Fax: ++968 2 444 6584Mail: pronab@voltampoman.com

Sharikah Fanniyah Omaniyah Ltd. - OmanTel: ++968 2 481 5970Fax: ++968 2 481 0706Mail: sfoelect@omantel.net.om

Bloudan Control Systems Industry - DubaiTel: ++971 4 339 0499Fax: ++971 4 339 1553Mail: arun@bcsdubai.com

Power & Control Fzco - DubaiTel: ++971 4 883 0391Fax: ++971 4 883 0392Mail: rami@pnc-ae.com

SAS Power Industries - DubaiTel: ++971 7 244 7278Fax: ++971 7 244 7689Mail: v.joshi@switchauto-pi.com

Al Bonian International - LebanonTel: ++961 6 40 0195Fax: ++961 6 40 0192Mail: mamalek@albonian-intl.com

Saudi United for Mech. Elec. - Saudi ArabiaTel: ++966 1 265 2953Fax: ++966 1 265 2443Mail: syed-muneer@eco.com.sa

Jawad Electric Switchgear Mfg. - Jordan Tel: ++962 6 488 5617Fax: ++962 6 489 1481Mail: b_hindi@go.com.jo

Schneider Electrical Engineering Ltd - IsraelTel: ++972 4 609 4433Fax: ++972 4 649 2216Mail: oded@sche.co.il

MIDDLE EAST - Contd.PAC International - QatarTel: ++974 699 6445Fax: ++974 469 0364Mail: mazen_harb@harbelectric.com

Electro-Mechanical Enterprises - QatarTel: ++974 468 4157Fax: ++974 468 4207Mail: info@emeg.com.ga

KG Switchgear - QatarTel: ++974 416 5836Fax: ++974 416 5837Mail: kumar@kgswitchgear.com

ASIAElsteel Ltd. - Sri LankaTel: ++94 11 225 2485Fax: ++94 11 225 2698Mail: elsteel@elsteel.com

Elsteel Modular Products (Pvt) Ltd. - IndiaTel: ++91 832 661 1111Fax: ++91 832 661 1112Mail: elsteel@elsteel.in

Elsteel Ltd. - IndiaTel: ++91 80 2351 9747Fax: ++91 80 2351 9757Mail: nishith@elsteel.com

Elsteel Techno - Singapore & MalaysiaTel: ++65 645 546 98Fax: ++65 645 591 31Mail: elsteel@singnet.com.sg

Fudo Automation Systems - Hydrabad, IndiaTel: ++91 40 2004 0814Fax: ++91 40 2754 4075Mail: fudo@rediffmail.com

Neptune Systems (Pvt) Ltd. - IndiaTel: ++91 120 306 9000Fax: ++91 120 306 9042Mail: dk@neptuneindia.com

AFRICAElsteel Ltd. - South AfricaTel: ++27 11 383 8300Fax: ++27 11 824 1353Mail: sales@elsteel.co.za

M & E Commercial Engineers Ltd.- MauritiusTel: ++230 670 5201Fax: ++230 670 5200Mail: mec.eng@intnet.mu

Specialised Power Systems Ltd. - KenyaTel: ++254 20 207 7219Fax: ++254 20 353 2986Mail: specialised@wananchi.com

CISJSC Electronmash - RussiaTel: ++781 2 320 1262Fax: ++781 2 320 1262Mail: alexeev@electronmash.ru

www.elsteel.com

FMTUFFM!Efonbsl!·!Fabriksvej 23 · 3000 Helsingor

Tel +45 49 22 33 44 · Fax +45 49 22 33 45

elsteel@elsteel.dk · xxx/fmtuffm/dpn

DISTRIBUTORS

ww

w.e

lsteel.c

om

ww

w.e

lsteel.c

om

Recommended