View
22
Download
0
Category
Preview:
Citation preview
®
ELECTRIC PUMPSParts Diagram and Part Numbers
Plunger and Diaphragm Pumps
Sidewinder Pumps Inc
2108 S.W. Evangeline Thruway, Lafayette, Louisiana 70508
Office: (337) 235-9838 Fax (337) 235-9852
Website: www.sidewinderpumps.com
Email: sales@sidewinderpumps.com
TABLE OF CONTENTS Page Contents
1 The V‐10 Chemical Pump 2 V‐5 & V‐10 Pump Head Capacities 3 Pump Installation Procedures 4 Pump Installation Diagram 5 Speed Reducer Lubrication & Pressure Relief Valve
Installation
Parts Breakdown
6 1/4 Thru 5/8 Inch Piston Head Parts 7 1 Inch Piston Head Parts 8 1 ½ & 2 Inch Piston Head Parts 9 5/8 Inch Diaphragm Head Parts 10 1 inch Diaphragm Head Parts 11 1 ½ & 2 inch Diaphragm Head Parts 12 V‐5 & V‐10 Drive Assemblies
Maintenance
13 1/4 Thru 5/8 Inch Packing Replacement 14 1 Inch Packing Replacement 15 1 ½ & 2 Inch Packing Replacement 16 5/8 Inch Diaphragm Replacement 17 1 Inch Diaphragm Replacement 18 1 ½ and 2 Inch Diaphragm Replacement
Miscellaneous
19 Dimensional Data 20 Sidewinder Pumps F‐150‐20 Filter Unit
Air, gas or liquid chemical filterUsed on suction line of chemical metering pump
All stainless steel construction20 Micron Polyethylene filter element
Connecting ports are 1/4" FNPTThe element may be replaced without removing the filter from the process line
No wrenches required for maintenanceExcellent for Methanol service
Maximum recommended operating pressure 150 PSIBurst pressure 2000 PSI
Prolong pump seal and plunger life
Sidewinder Pumps Inc. Lafayette, Louisiana, USAOffice (337) 235-9838 / Fax (337) 235-9852
website: www.sidewinderpumps.com / email: sales@sidewinderpumps.com
10/08
F4-150-20
®
Sidewinder Pumps Filter Unit
Air, Gas or Liquid Filter Parts Break Down
1. Loosen and remove Canister Lock Ring (3)2. Pull Filter Canister (2) straight downoff of Filter Body (1)3. Remove Filter Element (5)4. Insert and hand tighten the newFilter Element (5)5. NOTE: Filter Element must be “HAND TIGHTEN” only.6. Inspect and replace Canister O-ringSeal (4) if neccesary7. Replace Filter Canister (2) and CanisterLock Ring (3) and hand tighten Lock Ring (3)
All Dimensions are approximate
®
Maintenance Instructions
Item Description Part Number Material1 Filter Body F4‐1 303 SS2 Filter Canister F4‐2 304 SS3 Canister Lock Ring F4‐3 303 SS4 Canister O‐ring Seal F4‐5 Aflas5 20 Micron Filter Element F4‐20 Polyethylene
Sidewinder Pumps Inc. Information
Sidewinder Pumps Inc.
Office Phone : (337)-235-9838Office Fax : (337)-235-9852
Mailing Address:P.O. Box 80769Lafayette, Louisiana USA 70598-0769
Physical / Shipping Address:2108 S. W. Evangeline ThruwayLafayette, Louisiana, USA 70508
V.P. / General Manager: Paul GeorgeMarketing Director: Guy M. ChachereOffice Manager: Cathy LouviereProduction Manager Bob Ritcher
Website: www.sidewinderpumps.com
Email:General: sidewinder@sidewinderpumps.comPurchase Order Submittal: sales@sidewinderpumps.comInquiries/Quotations: quotes@sidewinderpumps.comProduct Information: info@sidewinderpumps.com
12/2006
Recommended