View
233
Download
6
Category
Tags:
Preview:
Citation preview
No more MASM
Lab 5 Introduction to MPLAB IDE
Create a new project Compile a project Transfer the program to the board
This lab will have 3 parts. They will involve polling timers and setting up interrupts.
Introduction to MPLAB IDE
Start MPLAB IDE v8.15a Select Project
Select Project Wizard… Click Next
Device -> PIC16F917 Click Next
Active Toolsuite -> HI-TECH Universal Toolsuite HI-TECH ANSI C Compiler
Click Next
Continued…
Create New Project File Choose an existing folder or create a folder and
choose a file name and click save Click Next
Skip Step Four by clicking next Select Finish Create a new file by selecting File -> New
Save file as ‘.c’
Compiling your project
Type in the following:#include <htc.h>
void main(void){
} In the project window, add the .c file to
list of source files. Click Project->build.
Programming the PIC board
Click Pogrammer Select Programmer
Choose MPLAB ICD 2 If you do not see “MPLAB ICD 2 ready for
next operation” message in the output log window, then select Programmer->Settings. Ensure that the settings are as follows: Under communication tab: Com Port is set to
USB Under power tab: Power target circuit from
MPLAB ICD 2 box is checked
Recommended