View
220
Download
0
Category
Preview:
Citation preview
Eco Moisture Separator
Additionally, Camfil Farr offers two drainage equippedside access housings:
MOISTURE/PACK® - Single-stage housing, 12” deep,with drain. It is ideal where minimal space is available,or where particulate filters are utilized elsewhere inthe system.
ECO GLIDE/PACK® - Three-stage housing with drainage provided in the first stage. Second stageaccommodates a 2” Camfil Farr 30/30®. The thirdstage has universal holding frames to accept a varietyof filters and efficiencies.
Camfil Farr Product Sheet
Eco Moisture Separator - RPEMS1004-06-04
Camfil Farr - Industrial Products
CAMFIL FARR ECO MOISTURE SEPARATORS are highlyeffective in significantly reducing oil mist, water mist, fog ordroplets from outside or recirculated air. In addition, theyare useful downstream of DX or chilled water coils, andsteam or mist-type humidifiers which allow saturated air tocondense out.
CONSTRUCTION – The 2” deep media pack is encased ina 4” deep, 16-gauge galvanized steel enclosing frame andis comprised of multiple, alternate layers of flat andcrimped, galvanized screen.
PERFORMANCE – The separator is 98% efficient on20 micron droplet size at 500 fpm. Velocity should notexceed 550 fpm or go below 450 fmp without consultingfactory.
INSTALLATION – The ECO Moisture Separator must bevertically installed in order to operate at peak efficiency.A “TOP” marker is provided for proper orientation duringinstallation. Mounting hardware must be designed tosupport the moisture separator with adequate drain-age.For built-up banks, Farr’s Type 8® holding frames can bejoined to create a functional system.
100
90
80
70
60
50
40
30
20
10
00.6 .8 1 1.5 2 3 4 5 6 8 10 15 20
DROPLET SIZE (microns)
EF
FIC
IEN
CY
(p
erc
en
t)
EFFICIENCY VS. DROPLET SIZE@ 500 fpm (2.54 m/s)
1.00.90.80.70.6
0.5
0.4
0.3
0.2
0.1
.25
.20
.15
.12
.10
.07
.05
.02
3000750
2500625
2000500
1500375
CFMFPM
AIRFLOW
AIR
FLO
W R
ES
ISTA
NC
E (
ins.
w. g
.) AIRFLOW RESISTANCE (kPa)
AIRFLOW RESISTANCE
RATED AIRFLOW
98% EFFICIENT FOR SIDE ACCESS HOUSINGS & BUILT-UP BANKS
Camfil FarrIndustrial Products DivisionTel.: 1-800-976-9382 or (450) 629-3030Fax: (450) 662-6035E-mail: IPD@camfilfarr.comwww.camfilfarr.com
SPECIFICATIONS
Represented by:
Eco Moisture SeparatorTo ensure proper installation and drainage, a “TOP”marker shall be placed by the manufacturer on the popof the enclosing frame.
Built-up banks shall consist of Farr Type 8 HoldingFrames. A drain trough must be provided by the installerunder each row of separators and frames to carry offaccumulated liquids.
Performance – When installed vertically, the separatorshall be 98% efficient on 20 micron moisture droplets at500 fpm (2.54 m/s) face velocity.
Airflow resistance at 500 fpm (2.54 m/s) shall not begreater than 0.25” w.g. (0.06 kPa). Airflow shall notexceed 550 fpm (2.79 m/s) to avoid liquid carry-over.
Note: Stainless steel may be inserted as on option in lieu of galvanized steel.
For filter banks morethan five filters wide,bank should beseparated near thecenter for an addi-tional downspout.
ORDERING INFORMATIONCAMFIL FARR
ORDERINGNUMBER
USE NOMINALSIZE
DIMENSIONS
GALVANIZED STEEL MOISTURE SEPARATOR
STAINLESS STEEL MOISTURE SEPARATOR
RATED AIRFLOW WEIGHTACTUAL HEIGHT ACTUAL WIDTHinches mm inches mm cfm m3 /h lbs. kgs.
064649-001 24 X 24 X 4 23.38 594 23.38 594 2000 3400 19 8.6064649-002 24 X 12 X 4 23.38 594 11.38 289 1000 1700 10 4.5064649-003 12 X 24 X 4 11.38 289 23.38 594 1000 1700 10 4.5
FORBUILT-UPBANKS
064649-004 24 X 24 X 4 23.38 594 23.38 594 2000 3400 19 8.6064649-005 24 X 12 X 4 23.38 594 11.38 289 1000 1700 10 4.5064649-006 12 X 24 X 4 11.38 289 23.38 594 1000 1700 10 4.5
FORSIDE ACCESSHOUSINGS*
098512-001 24 X 24 X 4 23.38 594 23.38 594 2000 3400 19 8.6098512-002 24 X 12 X 4 23.38 594 11.38 289 1000 1700 10 4.5098512-003 12 X 24 X 4 11.38 289 23.38 594 1000 1700 10 4.5
FORBUILT-UPBANKS
098512-004 24 X 24 X 4 23.38 594 23.38 594 2000 3400 19 8.6098512-005 24 X 12 X 4 23.38 594 11.38 289 1000 1700 10 4.5098512-006 12 X 24 X 4 11.38 289 23.38 594 1000 1700 10 4.5
FORSIDE ACCESSHOUSINGS*
Camfil Farr Company has a policy of uninterrupted research, development and productimprovement and reserves the right to change design and specifications without notice.
* Groups 004, 005 and 006 are equipped with a spongeneoprene gasket on each side for ECO side access housings.
Moisture Separators shall be Camfil Farr Type ECO.They shall be permanent, cleanable, all metal, panel type.Each separator shall consist of steel screen media andenclosing frames.
Media pack shall be constructed of 15 corrugated and flatlayers of galvanized screen wire. It shall be 2” (51 mm) deepand be permanently fastened together to ensure rigidity.
Enclosing frameshall be 16-gaugegalvanized steel,4” (102 mm) deep,with flush, miteredand re in forcedcorners . F ramebottoms shall beequipped with aminimum of three0.375” (9.5 mm)diameter drainholes.
Camfil Farr ECOMoisture Separator infirst stage of sideaccess housing. Note: Drawing C-67125 details installation, through
construction and drainage requirements.
Recommended