View
1
Download
0
Category
Preview:
Citation preview
DATA SHEET
www.raycap.comInformation contained in this document is subject to
change at any time without notice.
Kombi-Blitzstromableiter ProTec ZPS T1H 3+0(-R)Class I • Class II • Type 1 • Type 2
Anwendungsgebiet: Hauptverteilung, 40-mm-Sammelschienensysteme
Verteilungsnetze: TN-CSchutzpfade: L-PEN
Ableitvermögen: Iimp = 12,5kA(10/350µs)In = 20kA (8/20µs)
IEC/EN: Typ1+2/ClassI+IITechnologie: Hybrid
Leckstrom: KeinLeckstromFolgestrom: Kein Folgestrom
Gehäuseausführung: KompaktKonformität: EN61643-11:2012
IEC61643-11:2011
Technical DataProTec ZPS T1H-xxx-3+0(-R)
IEC Electrical
NominalACVoltage(50/60Hz) Uo / Un 240 V
MaximumContinuousOperatingVoltage(AC) Uc 300 V
NominalDischargeCurrent(8/20µs) In 20 kA
MaximumDischargeCurrent(8/20µs) Imax 50 kA
ImpulseDischargeCurrent(10/350µs) Iimp 12.5 kA
SpecificEnergy W/R 39 kJ / Ω
Charge Q 6.25As
VoltageProtectionLevel Up 1500V
Response Time tA < 100ns
Back-Up Fuse (max) 315 A gG
Short-CircuitCurrentRating(AC) ISCCR 25 kA
TOVWithstand120min UT 442 V
NumberofPorts 1
Mechanical & Environmental
Operating Temperature Range Ta -40 ºF to +185 ºF [-40 ºC to +85 ºC]
PermissibleOperatingHumidity RH 5%...95%
Altitude 13123 ft [4000 m]
TerminalScrewTorque Mmax PZ2 / 39.9 Ibf·in [4.5 Nm]
ConductorCrossSection(max) 35 mm2 (Solid, Stranded) / 25 mm2 (Flexible)
2 AWG (Solid, Stranded) / 4 AWG (Flexible)
Mounting 40mm Busbar Systems
DegreeOfProtection IP 20*
HousingMaterial Thermoplastic: Extinguishing Degree UL 94 V-0
OperatingState/FaultIndication Green Flag / Not Green Flag
Remote Contacts (RC) Optional
RCSwitchingCapacity AC: 250V/ 1A, 125V/ 1A; DC: 48V/0.5A, 24V/0.5A, 12V/0.5A
RC ConductorCrossSection(max) 1.5mm2 (Solid) / 16 AWG (Solid)
Order Information
Order Code
ProTecZPST1H-300-3+0(basic) 59.0900
ProTecZPST1H-300-3+0-R(withremotecontacts) 59.0901
*IP 30 (in combination with cover)
www.raycap.com
Information contained in this document is subject to
change at any time without notice.
Dimensions & PackagingDimensions & Packaging
ProTec ZPS T1H-xxx-3+0 300
SingleUnitWeight pounds[grams] 1.552 [704]
PackagingDimensions(HxWxL) 2.9 × 4.5 × 8.6" [75 × 116 × 220 mm]
StandardOrderQuantity 1 Unit
ProTec ZPS T1H-xxx-3+0-R 300
SingleUnitWeight pounds[grams] 1.570 [712]
PackagingDimensions(HxWxL) 2.9 × 4.5 × 8.6" [75 × 116 × 220 mm]
StandardOrderQuantity 1 Unit
ProTec ZPS T1H 3+0(-R)
Internal Configuration
8.11 [
229]
2.28 [47] 3.89 [99]
Legend
L Terminal for Line Busbar
PEN Terminal for PEN Busbar
Terminal for Main Earthing Terminal
RC Terminal for Remote Contacts (Optional)
TD Thermal Disconnector
L2
L3
PEN
L1 TDTD
TD
L2
L3
12 11 14
RC
PEN
L1 TDTD
TD
inches [mm]
© 2019 Raycap All rights reserved.G29-00-820 190321
DATA SHEET
www.raycap.comInformation contained in this document is subject to
change at any time without notice.
Kombi-Blitzstromableiter ProTec ZPS T1H 3+0(-R)-LClass I • Class II • Type 1 • Type 2
Anwendungsgebiet: Hauptverteilung, 40-mm-Sammelschienensysteme
Verteilungsnetze: TN-CSchutzpfade: L-PEN
Ableitvermögen: Iimp = 12,5kA(10/350µs)In = 20kA (8/20µs)
IEC/EN: Typ1+2/ClassI+IITechnologie: Hybrid
Leckstrom: KeinLeckstromFolgestrom: Kein Folgestrom
Gehäuseausführung: KompaktKonformität: EN61643-11:2012
IEC61643-11:2011
Technical DataProTec ZPS T1H-xxx-3+0(-R)-L
IEC Electrical
NominalACVoltage(50/60Hz) Uo / Un 240 V
MaximumContinuousOperatingVoltage(AC) Uc 300 V
NominalDischargeCurrent(8/20µs) In 20 kA
MaximumDischargeCurrent(8/20µs) Imax 50 kA
ImpulseDischargeCurrent(10/350µs) Iimp 12.5 kA
SpecificEnergy W/R 39 kJ / Ω
Charge Q 6.25As
VoltageProtectionLevel Up 1500V
Response Time tA < 100ns
Back-Up Fuse (max) 315 A gG
Short-CircuitCurrentRating(AC) ISCCR 25 kA
TOVWithstand120min UT 442 V
NumberofPorts 1
Mechanical & Environmental
Operating Temperature Range Ta -40 ºF to +185 ºF [-40 ºC to +85 ºC]
PermissibleOperatingHumidity RH 5%...95%
Altitude 13123 ft [4000 m]
TerminalScrewTorque Mmax PZ2 / 39.9 Ibf·in [4.5 Nm]
ConductorCrossSection(max) 35 mm2 (Solid, Stranded) / 25 mm2 (Flexible)
2 AWG (Solid, Stranded) / 4 AWG (Flexible)
Mounting 40mm Busbar Systems
DegreeOfProtection IP 20*
HousingMaterial Thermoplastic: Extinguishing Degree UL 94 V-0
OperatingState/FaultIndication Green Flag / Not Green Flag
Remote Contacts (RC) Optional
RCSwitchingCapacity AC: 250V/ 1A, 125V/ 1A; DC: 48V/0.5A, 24V/0.5A, 12V/0.5A
RC ConductorCrossSection(max) 1.5mm2 (Solid) / 16 AWG (Solid)
Load Terminal (L1’)
Rated Current IL 20 A
LoadSideOvercurrentProtectiveDevice 20 A gG
WireConnectionMethod Push In
ConductorCrossSection 10 AWG / 4 mm2 (Solid, Stranded, Flexible)
StrippingLength 12 mm
Order Information
Order Code
ProTecZPST1H-300-3+0-L(withloadterminal) 59.0902
ProTecZPST1H-300-3+0-R-L(withremotecontactsandloadterminal) 59.0903
*IP 30 (in combination with cover)
www.raycap.com
Information contained in this document is subject to
change at any time without notice.
ProTec ZPS T1H 3+0(-R)-L
Internal Configuration
Legend
L Terminal for Line Busbar
PEN Terminal for PEN Busbar
Terminal for Main Earthing Terminal
RC Terminal for Remote Contacts (Optional)
TD Thermal Disconnector
L1’ Load Terminal (Optional)
inches [mm]
Dimensions & PackagingDimensions & Packaging
ProTec ZPS T1H-xxx-3+0-L 300
SingleUnitWeight pounds[grams] 1.570 [712]
PackagingDimensions(HxWxL) 2.9 × 4.5 × 8.6" [75 × 116 × 220 mm]
StandardOrderQuantity 1 Unit
ProTec ZPS T1H-xxx-3+0-R-L 300
SingleUnitWeight pounds[grams] 1.587 [720]
PackagingDimensions(HxWxL) 2.9 × 4.5 × 8.6" [75 × 116 × 220 mm]
StandardOrderQuantity 1 Unit
8.11 [
229]
2.28 [47] 3.89 [99]
L2
L3
PEN
L1 TDTD
TD
L1’
L2
L3
12 11 14
RC
PEN
L1 TDTD
TD
L1’
© 2019 Raycap All rights reserved.G29-00-821 190321
DATA SHEET
www.raycap.comInformation contained in this document is subject to
change at any time without notice.
Follow Current Interrupt Rating (N-PE) Ifi 100ARMS
Kombi-Blitzstromableiter ProTec ZPS T1H 3+1(-R)Class I • Class II • Type 1 • Type 2
Technical DataProTec ZPS T1H-xxx-3+1(-R)
IEC Electrical
NominalACVoltage(50/60Hz) Uo / Un 240 V
MaximumContinuousOperatingVoltage(AC)(L-N) Uc 300 V
(N-PE) Uc 305 V
NominalDischargeCurrent(8/20µs)(L-N)/(N-PE) In 20 kA / 80 kA
MaximumDischargeCurrent(8/20µs)(L-N)/(N-PE) Imax 50 kA / 100 kA
ImpulseDischargeCurrent(10/350µs)(L-N)/(N-PE) Iimp 12.5 kA / 50 kA
SpecificEnergy(L-N)/(N-PE) W/R 39 kJ / Ω / 625 kJ / Ω
Charge(L-N)/(N-PE) Q 6.25As / 25As
VoltageProtectionLevel(L-N)/(N-PE) Up 1500V / 1500V
Follow Current Interrupt Rating (N-PE) Ifi 100ARMS
ResponseTime(L-N)/(N-PE) tA < 100ns / < 100ns
Back-Up Fuse (max) 315 A gG
Short-CircuitCurrentRating(AC) ISCCR 25 kA
TOVWithstand120min(L-N) UT 442 V
TOVWithstand200ms(N-PE) UT 1200 V
NumberofPorts 1
Mechanical & Environmental
Operating Temperature Range Ta -40 ºF to +185 ºF [-40 ºC to +85 ºC]
PermissibleOperatingHumidity RH 5%...95%
Altitude 13123 ft [4000 m]
TerminalScrewTorque Mmax PZ2 / 39.9 Ibf·in [4.5 Nm]
ConductorCrossSection(max) 35mm2 (Solid, Stranded) / 25mm2 (Flexible)
2 AWG (Solid, Stranded) / 4 AWG (Flexible)
Mounting 40mm Busbar Systems
DegreeOfProtection IP 20*
HousingMaterial Thermoplastic: Extinguishing Degree UL 94 V-0
OperatingState/FaultIndication Green Flag / Not Green Flag
Remote Contacts (RC) Optional
RCSwitchingCapacity AC: 250V/ 1A, 125V/ 1A; DC: 48V/0.5A, 24V/0.5A, 12V/0.5A
RC ConductorCrossSection(max) 1.5mm2 (Solid) / 16 AWG (Solid)
Order Information
Order Code
ProTecZPST1H-300-3+1(basic) 59.0908
ProTecZPST1H-300-3+1-R(withremotecontacts) 59.0909
*IP 30 (in combination with cover)
Anwendungsgebiet: Hauptverteilung, 40-mm-Sammelschienensysteme
Verteilungsnetze: TN-S,TTSchutzpfade: L-N,N-PE
Ableitvermögen: Iimp = 12,5kA(10/350µs)In = 20kA (8/20µs)
IEC/EN: Typ1+2/ClassI+IITechnologie: Hybrid
Leckstrom: KeinLeckstromFolgestrom: Kein Folgestrom
Gehäuseausführung: KompaktKonformität: EN61643-11:2012
IEC61643-11:2011
www.raycap.com
Information contained in this document is subject to
change at any time without notice.
ProTec ZPS T1H 3+1(-R)
Internal Configuration
Legend
L Terminal for Line Busbar
N Terminal for Neutral Busbar
PE Terminal for PE Busbar
Terminal for PE / G Busbar / Conductor
TD Terminal for PE Busbar
RC Terminal for Remote Contacts (Optional)
TD Thermal Disconnector
L1
L2
L3
12 11 14
RC
N
TDTD
TD
PE
L1
L2
L3
N
TDTD
TD
PE
Dimensions & PackagingDimensions & Packaging
ProTec ZPS T1H-xxx-3+1 300
SingleUnitWeight pounds[grams] 1.640 [744]
PackagingDimensions(HxWxL) 2.9 × 4.5 × 8.6" [75 × 116 × 220 mm]
StandardOrderQuantity 1 Unit
ProTec ZPS T1H-xxx-3+1-R 300
SingleUnitWeight pounds[grams] 1.658 [752]
PackagingDimensions(HxWxL) 2.9 × 4.5 × 8.6" [75 × 116 × 220 mm]
StandardOrderQuantity 1 Unit
8.11 [
229]
2.28 [47] 3.89 [99]
inches [mm]
© 2019 Raycap All rights reserved.G29-00-822 190321
DATA SHEET
www.raycap.comInformation contained in this document is subject to
change at any time without notice.
Kombi-Blitzstromableiter ProTec ZPS T1H 3+1(-R)-LClass I • Class II • Type 1 • Type 2
Technical DataProTec ZPS T1H-xxx-3+1(-R)-L
IEC Electrical
NominalACVoltage(50/60Hz) Uo / Un 240 V
MaximumContinuousOperatingVoltage(AC)(L-N) Uc 300 V
(N-PE) Uc 305 V
NominalDischargeCurrent(8/20µs)(L-N)/(N-PE) In 20 kA / 80 kA
MaximumDischargeCurrent(8/20µs)(L-N)/(N-PE) Imax 50 kA / 100 kA
ImpulseDischargeCurrent(10/350µs)(L-N)/(N-PE) Iimp 12.5 kA / 50 kA
SpecificEnergy(L-N)/(N-PE) W/R 39 kJ / Ω / 625 kJ / Ω
Charge(L-N)/(N-PE) Q 6.25As / 25As
VoltageProtectionLevel(L-N)/(N-PE) Up 1500V / 1500V
Follow Current Interrupt Rating (N-PE) Ifi 100ARMS
ResponseTime(L-N)/(N-PE) tA < 100ns / < 100ns
Back-Up Fuse (max) 315 A gG
Short-CircuitCurrentRating(AC) ISCCR 25 kA
TOVWithstand120min(L-N) UT 442 V
TOVWithstand200ms(N-PE) UT 1200 V
NumberofPorts 1
Mechanical & Environmental
Operating Temperature Range Ta -40 ºF to +185 ºF [-40 ºC to +85 ºC]
PermissibleOperatingHumidity RH 5%...95%
Altitude 13123 ft [4000 m]
TerminalScrewTorque Mmax PZ2 / 39.9 Ibf·in [4.5 Nm]
ConductorCrossSection(max) 35mm2 (Solid, Stranded) / 25mm2 (Flexible)
2 AWG (Solid, Stranded) / 4 AWG (Flexible)
Mounting 40mm Busbar Systems
DegreeOfProtection IP 20*
HousingMaterial Thermoplastic: Extinguishing Degree UL 94 V-0
OperatingState/FaultIndication Green Flag / Not Green Flag
Remote Contacts (RC) Optional
RCSwitchingCapacity AC: 250V/ 1A, 125V/ 1A; DC: 48V/0.5A, 24V/0.5A, 12V/0.5A
RC ConductorCrossSection(max) 1.5mm2 (Solid) / 16 AWG (Solid)
Load Terminal (L1’)
Rated Current IL 20 A
LoadSideOvercurrentProtectiveDevice 20 A gG
WireConnectionMethod Push In
ConductorCrossSection 10 AWG / 4 mm2 (Solid, Stranded, Flexible)
StrippingLength 12 mm
Order Information
Order Code
ProTecZPST1H-300-3+1-L(withloadterminal) 59.0910
ProTecZPST1H-300-3+1-R-L(withremotecontactsandloadterminal) 59.0911
*IP 30 (in combination with cover)
Anwendungsgebiet: Hauptverteilung, 40-mm-Sammelschienensysteme
Verteilungsnetze: TN-S,TTSchutzpfade: L-N,N-PE
Ableitvermögen: Iimp = 12,5kA(10/350µs)In = 20kA (8/20µs)
IEC/EN: Typ1+2/ClassI+IITechnologie: Hybrid
Leckstrom: KeinLeckstromFolgestrom: Kein Folgestrom
Gehäuseausführung: KompaktKonformität: EN61643-11:2012
IEC61643-11:2011
www.raycap.com
Information contained in this document is subject to
change at any time without notice.
ProTec ZPS T1H 3+1(-R)-L
Internal Configuration
inches [mm]
Dimensions & PackagingDimensions & Packaging
ProTec ZPS T1H-xxx-3+1-L 300
SingleUnitWeight pounds[grams] 1.658 [752]
PackagingDimensions(HxWxL) 2.9 × 4.5 × 8.6" [75 × 116 × 220 mm]
StandardOrderQuantity 1 Unit
ProTec ZPS T1H-xxx-3+1-R-L 300
SingleUnitWeight pounds[grams] 1.676 [760]
PackagingDimensions(HxWxL) 2.9 × 4.5 × 8.6" [75 × 116 × 220 mm]
StandardOrderQuantity 1 Unit
8.11 [
229]
2.28 [47] 3.89 [99]
L1
L2
L3
12 11 14
RC
N
TDTD
TD
PE
L1’
L1
L2
L3
N
TDTD
TD
PE
L1’
Legend
L Terminal for Line Busbar
PE Terminal for PE Busbar
N Terminal for Neutral Busbar
Terminal for Main Earthing Terminal
RC Terminal for Remote Contacts (Optional)
TD Thermal Disconnector
L1’ Load Terminal (Optional)
© 2019 Raycap All rights reserved.G29-00-823 190321
DATA SHEET
www.raycap.comInformation contained in this document is subject to
change at any time without notice.
Kombi-Blitzstromableiter ProTec ZPS T1H 3+0 E(-R)Class I • Class II • Type 1 • Type 2
Anwendungsgebiet: Hauptverteilung, 40-mm-Sammelschienensysteme
Verteilungsnetze: TN-CSchutzpfade: L-PEN
Ableitvermögen: Iimp = 12,5kA(10/350µs)In = 20kA (8/20µs)
IEC/EN: Typ1+2/ClassI+IITechnologie: Hybrid
Leckstrom: KeinLeckstromFolgestrom: Kein Folgestrom
Gehäuseausführung: KompaktKonformität: EN61643-11:2012
IEC61643-11:2011
Follow Current Interrupt Rating (N-PE) Ifi 100ARMS
Technical DataProTec ZPS T1H-xxx-3+0-E(-R)
IEC Electrical
NominalACVoltage(50/60Hz) Uo / Un 240 V
MaximumContinuousOperatingVoltage(AC) Uc 300 V
NominalDischargeCurrent(8/20µs) In 20 kA
MaximumDischargeCurrent(8/20µs) Imax 50 kA
ImpulseDischargeCurrent(10/350µs) Iimp 7.5 kA
SpecificEnergy W/R 14 kJ / Ω
Charge Q 3.75 As
VoltageProtectionLevel Up 1500V
Response Time tA < 100ns
Back-Up Fuse (max) 315 A gG
Short-CircuitCurrentRating(AC) ISCCR 25 kA
TOVWithstand120min UT 442 V
NumberofPorts 1
Mechanical & Environmental
Operating Temperature Range Ta -40 ºF to +185 ºF [-40 ºC to +85 ºC]
PermissibleOperatingHumidity RH 5%...95%
Altitude 13123 ft [4000 m]
TerminalScrewTorque Mmax PZ2 / 39.9 Ibf·in [4.5 Nm]
ConductorCrossSection(max) 35 mm2 (Solid, Stranded) / 25 mm2 (Flexible)
2 AWG (Solid, Stranded) / 4 AWG (Flexible)
Mounting 40mm Busbar Systems
DegreeOfProtection IP 20*
HousingMaterial Thermoplastic: Extinguishing Degree UL 94 V-0
OperatingState/FaultIndication Green Flag / Not Green Flag
Remote Contacts (RC) Optional
RCSwitchingCapacity AC: 250V/ 1A, 125V/ 1A; DC: 48V/0.5A, 24V/0.5A, 12V/0.5A
RC ConductorCrossSection(max) 1.5mm2 (Solid) / 16 AWG (Solid)
Order Information
Order Code
ProTecZPST1H-300-3+0-E(basic) 59.0904
ProTecZPST1H-300-3+0-E-R(withremotecontacts) 59.0905
*IP 30 (in combination with cover)
www.raycap.com
Information contained in this document is subject to
change at any time without notice.
ProTec ZPS T1H 3+0 E(-R)
Internal Configuration
Legend
L Terminal for Line Busbar
PEN Terminal for PEN Busbar
Terminal for Main Earthing Terminal
RC Terminal for Remote Contacts (Optional)
TD Thermal Disconnector
L2
L3
PEN
L1 TDTD
TD
L2
L3
12 11 14
RC
PEN
L1 TDTD
TDDimensions & Packaging
Dimensions & Packaging
ProTec ZPS T1H-xxx-3+0-E 300
SingleUnitWeight pounds[grams] 1.548 [702]
PackagingDimensions(HxWxL) 2.9 × 4.5 × 8.6" [75 × 116 × 220 mm]
StandardOrderQuantity 1 Unit
ProTec ZPS T1H-xxx-3+0-E-R 300
SingleUnitWeight pounds[grams] 1.565 [710]
PackagingDimensions(HxWxL) 2.9 × 4.5 × 8.6" [75 × 116 × 220 mm]
StandardOrderQuantity 1 Unit
8.11 [
229]
2.28 [47] 3.89 [99]
© 2019 Raycap All rights reserved.G29-00-824 190321
DATA SHEET
www.raycap.comInformation contained in this document is subject to
change at any time without notice.
Kombi-Blitzstromableiter ProTec ZPS T1H 3+0 E(-R)-LClass I • Class II • Type 1 • Type 2
Location of Use: MainDistributionBoards, 40mmBusbarSystems
Network Systems: TN-CMode of Protection: L-PEN
Surge Ratings: Iimp = 7.5kA(10/350µs)In = 20kA (8/20µs)
IEC/EN: ClassI+II/Type1+2Technology: Hybrid
Leakage Current Free: YesLine Follow Current: No
Housing: Compact designCompliance: IEC61643-11:2011
EN61643-11:2012
Technical DataProTec ZPS T1H-xxx-3+0-E(-R)-L
IEC Electrical
NominalACVoltage(50/60Hz) Uo / Un 240 V
MaximumContinuousOperatingVoltage(AC) Uc 300 V
NominalDischargeCurrent(8/20µs) In 20 kA
MaximumDischargeCurrent(8/20µs) Imax 50 kA
ImpulseDischargeCurrent(10/350µs) Iimp 7.5 kA
SpecificEnergy W/R 14 kJ / Ω
Charge Q 3.75 As
VoltageProtectionLevel Up 1500V
Response Time tA < 100ns
Back-Up Fuse (max) 315 A gG
Short-CircuitCurrentRating(AC) ISCCR 25 kA
TOVWithstand120min UT 442 V
NumberofPorts 1
Mechanical & Environmental
Operating Temperature Range Ta -40 ºF to +185 ºF [-40 ºC to +85 ºC]
PermissibleOperatingHumidity RH 5%...95%
Altitude 13123 ft [4000 m]
TerminalScrewTorque Mmax PZ2 / 39.9 Ibf·in [4.5 Nm]
ConductorCrossSection(max) 35 mm2 (Solid, Stranded) / 25 mm2 (Flexible)
2 AWG (Solid, Stranded) / 4 AWG (Flexible)
Mounting 40mm Busbar Systems
DegreeOfProtection IP 20*
HousingMaterial Thermoplastic: Extinguishing Degree UL 94 V-0
OperatingState/FaultIndication Green Flag / Not Green Flag
Remote Contacts (RC) Optional
RCSwitchingCapacity AC: 250V/ 1A, 125V/ 1A; DC: 48V/0.5A, 24V/0.5A, 12V/0.5A
RC ConductorCrossSection(max) 1.5mm2 (Solid) / 16 AWG (Solid)
Load Terminal (L1’)
Rated Current IL 20 A
LoadSideOvercurrentProtectiveDevice 20 A gG
WireConnectionMethod Push In
ConductorCrossSection 10 AWG / 4 mm2 (Solid, Stranded, Flexible)
StrippingLength 12 mm
Order Information
Order Code
ProTecZPST1H-300-3+0-E-L(withloadterminal) 59.0906
ProTecZPST1H-300-3+0-E-R-L(withremotecontactsandloadterminal) 59.0907
*IP 30 (in combination with cover)
www.raycap.com
Information contained in this document is subject to
change at any time without notice.
ProTec ZPS T1H 3+0 E(-R)-L
Internal Configuration
L2
L3
PEN
L1 TDTD
TD
L1’
L2
L3
12 11 14
RC
PEN
L1 TDTD
TD
L1’
Dimensions & PackagingDimensions & Packaging
ProTec ZPS T1H-xxx-3+0-E-L 300
SingleUnitWeight pounds[grams] 1.565 [710]
PackagingDimensions(HxWxL) 2.9 × 4.5 × 8.6" [75 × 116 × 220 mm]
StandardOrderQuantity 1 Unit
ProTec ZPS T1H-xxx-3+0-E-R-L 300
SingleUnitWeight pounds[grams] 1.583 [718]
PackagingDimensions(HxWxL) 2.9 × 4.5 × 8.6" [75 × 116 × 220 mm]
StandardOrderQuantity 1 Unit8.11 [
229]
2.28 [47] 3.89 [99]
Legend
L Terminal for Line Busbar
PEN Terminal for PEN Busbar
Terminal for Main Earthing Terminal
RC Terminal for Remote Contacts (Optional)
TD Thermal Disconnector
L1’ Load Terminal (Optional)
© 2019 Raycap All rights reserved.G29-00-825 190321
DATA SHEET
www.raycap.comInformation contained in this document is subject to
change at any time without notice.
Kombi-Blitzstromableiter ProTec ZPS T1H 3+1 E(-R)Class I • Class II • Type 1 • Type 2
Location of Use: MainDistributionBoards, 40mmBusbarSystems
Network Systems: TN-S,TTMode of Protection: L-N,N-PE
Surge Ratings: Iimp = 7.5kA/30kA(L-N/N-PE)In = 20kA/80kA (L-N/N-PE)
IEC/EN: ClassI+II/Type1+2Technology: Hybrid
Leakage Current Free: YesLine Follow Current: No
Housing: Compact designCompliance: IEC61643-11:2011
EN61643-11:2012
Follow Current Interrupt Rating (N-PE) Ifi 100ARMS
Technical DataProTec ZPS T1H-xxx-3+1-E(-R)
IEC Electrical
NominalACVoltage(50/60Hz) Uo / Un 240 V
MaximumContinuousOperatingVoltage(AC)(L-N) Uc 300 V
(N-PE) Uc 305 V
NominalDischargeCurrent(8/20µs)(L-N)/(N-PE) In 20 kA / 80 kA
MaximumDischargeCurrent(8/20µs)(L-N)/(N-PE) Imax 50 kA / 100 kA
ImpulseDischargeCurrent(10/350µs)(L-N)/(N-PE) Iimp 7.5 kA / 30 kA
SpecificEnergy(L-N)/(N-PE) W/R 14 kJ / Ω / 225 kJ / Ω
Charge(L-N)/(N-PE) Q 3.75 As / 15As
VoltageProtectionLevel(L-N)/(N-PE) Up 1500V / 1500V
Follow Current Interrupt Rating (N-PE) Ifi 100ARMS
ResponseTime(L-N)/(N-PE) tA < 100ns / < 100ns
Back-Up Fuse (max) 315 A gG
Short-CircuitCurrentRating(AC) ISCCR 25 kA
TOVWithstand120min(L-N) UT 442 V
TOVWithstand200ms(N-PE) UT 1200 V
NumberofPorts 1
Mechanical & Environmental
Operating Temperature Range Ta -40 ºF to +185 ºF [-40 ºC to +85 ºC]
PermissibleOperatingHumidity RH 5%...95%
Altitude 13123 ft [4000 m]
TerminalScrewTorque Mmax PZ2 / 39.9 Ibf·in [4.5 Nm]
ConductorCrossSection(max) 35mm2 (Solid, Stranded) / 25mm2 (Flexible)
2 AWG (Solid, Stranded) / 4 AWG (Flexible)
Mounting 40mm Busbar Systems
DegreeOfProtection IP 20*
HousingMaterial Thermoplastic: Extinguishing Degree UL 94 V-0
OperatingState/FaultIndication Green Flag / Not Green Flag
Remote Contacts (RC) Optional
RCSwitchingCapacity AC: 250V/ 1A, 125V/ 1A; DC: 48V/0.5A, 24V/0.5A, 12V/0.5A
RC ConductorCrossSection(max) 1.5mm2 (Solid) / 16 AWG (Solid)
Order Information
Order Code
ProTecZPST1H-300-3+1-E(basic) 59.0912
ProTecZPST1H-300-3+1-E-R(withremotecontacts) 59.0913
*IP 30 (in combination with cover)
www.raycap.com
Information contained in this document is subject to
change at any time without notice.
ProTec ZPS T1H 3+1 E(-R)
Internal Configuration
L1
L2
L3
12 11 14
RC
N
TDTD
TD
PE
L1
L2
L3
N
TDTD
TD
PE
Dimensions & PackagingDimensions & Packaging
ProTec ZPS T1H-xxx-3+1-E 300
SingleUnitWeight pounds[grams] 1.636 [742]
PackagingDimensions(HxWxL) 2.9 × 4.5 × 8.6" [75 × 116 × 220 mm]
StandardOrderQuantity 1 Unit
ProTec ZPS T1H-xxx-3+1-E-R 300
SingleUnitWeight pounds[grams] 1.653 [750]
PackagingDimensions(HxWxL) 2.9 × 4.5 × 8.6" [75 × 116 × 220 mm]
StandardOrderQuantity 1 Unit
8.11 [
229]
2.28 [47] 3.89 [99]
inches [mm]
Legend
L Terminal for Line Busbar
PE Terminal for PE Busbar
N Terminal for Neutral Busbar
Terminal for Main Earthing Terminal
RC Terminal for Remote Contacts (Optional)
TD Thermal Disconnector
© 2019 Raycap All rights reserved.G29-00-826 190321
DATA SHEET
www.raycap.comInformation contained in this document is subject to
change at any time without notice.
Kombi-Blitzstromableiter ProTec ZPS T1H 3+1 E(-R)-LClass I • Class II • Type 1 • Type 2
Location of Use: MainDistributionBoards, 40mmBusbarSystems
Network Systems: TN-S,TTMode of Protection: L-N,N-PE
Surge Ratings: Iimp = 7.5kA/30kA(L-N/N-PE)In = 20kA/80kA (L-N/N-PE)
IEC/EN: ClassI+II/Type1+2Technology: Hybrid
Leakage Current Free: YesLine Follow Current: No
Housing: Compact designCompliance: IEC61643-11:2011
EN61643-11:2012
Technical DataProTec ZPS T1H-xxx-3+1-E(-R)-L
IEC Electrical
NominalACVoltage(50/60Hz) Uo / Un 240 V
MaximumContinuousOperatingVoltage(AC)(L-N) Uc 300 V
(N-PE) Uc 305 V
NominalDischargeCurrent(8/20µs)(L-N)/(N-PE) In 20 kA / 80 kA
MaximumDischargeCurrent(8/20µs)(L-N)/(N-PE) Imax 50 kA / 100 kA
ImpulseDischargeCurrent(10/350µs)(L-N)/(N-PE) Iimp 7.5 kA / 30 kA
SpecificEnergy(L-N)/(N-PE) W/R 14 kJ / Ω / 225 kJ / Ω
Charge(L-N)/(N-PE) Q 3.75 As / 15As
VoltageProtectionLevel(L-N)/(N-PE) Up 1500V / 1500V
Follow Current Interrupt Rating (N-PE) Ifi 100ARMS
ResponseTime(L-N)/(N-PE) tA < 100ns / < 100ns
Back-Up Fuse (max) 315 A gG
Short-CircuitCurrentRating(AC) ISCCR 25 kA
TOVWithstand120min(L-N) UT 442 V
TOVWithstand200ms(N-PE) UT 1200 V
NumberofPorts 1
Mechanical & Environmental
Operating Temperature Range Ta -40 ºF to +185 ºF [-40 ºC to +85 ºC]
PermissibleOperatingHumidity RH 5%...95%
Altitude 13123 ft [4000 m]
TerminalScrewTorque Mmax PZ2 / 39.9 Ibf·in [4.5 Nm]
ConductorCrossSection(max) 35mm2 (Solid, Stranded) / 25mm2 (Flexible)
2 AWG (Solid, Stranded) / 4 AWG (Flexible)
Mounting 40mm Busbar Systems
DegreeOfProtection IP 20*
HousingMaterial Thermoplastic: Extinguishing Degree UL 94 V-0
OperatingState/FaultIndication Green Flag / Not Green Flag
Remote Contacts (RC) Optional
RCSwitchingCapacity AC: 250V/ 1A, 125V/ 1A; DC: 48V/0.5A, 24V/0.5A, 12V/0.5A
RC ConductorCrossSection(max) 1.5mm2 (Solid) / 16 AWG (Solid)
Load Terminal (L1’)
Rated Current IL 20 A
LoadSideOvercurrentProtectiveDevice 20 A gG
WireConnectionMethod Push In
ConductorCrossSection 10 AWG / 4 mm2 (Solid, Stranded, Flexible)
StrippingLength 12 mm
Order Information
Order Code
ProTecZPST1H-300-3+1-E-L(withloadterminal) 59.0914
ProTecZPST1H-300-3+1-E-R-L(withremotecontactsandloadterminal) 59.0915
*IP 30 (in combination with cover)
Kombi-Blitzstromableiter
www.raycap.com
Information contained in this document is subject to
change at any time without notice.
ProTec ZPS T1H 3+1 E(-R)-L
Internal Configuration
inches [mm]
Internal Configuration
Dimensions & PackagingDimensions & Packaging
ProTec ZPS T1H-xxx-3+1-E-L 300
SingleUnitWeight pounds[grams] 1.653 [750]
PackagingDimensions(HxWxL) 2.9 × 4.5 × 8.6" [75 × 116 × 220 mm]
StandardOrderQuantity 1 Unit
ProTec ZPS T1H-xxx-3+1-E-R-L 300
SingleUnitWeight pounds[grams] 1.671 [758]
PackagingDimensions(HxWxL) 2.9 × 4.5 × 8.6" [75 × 116 × 220 mm]
StandardOrderQuantity 1 Unit
8.11 [
229]
2.28 [47] 3.89 [99]
L1
L2
L3
12 11 14
RC
N
TDTD
TD
PE
L1’
L1
L2
L3
N
TDTD
TD
PE
L1’
Legend
L Terminal for Line Busbar
PE Terminal for PE Busbar
N Terminal for Neutral Busbar
Terminal for Main Earthing Terminal
RC Terminal for Remote Contacts (Optional)
TD Thermal Disconnector
L1’ Load Terminal (Optional)
© 2019 Raycap All rights reserved.G29-00-827 190321
Recommended