View
1
Download
0
Category
Preview:
Citation preview
1
Data Sheet DSFO10004AR
Americas (703) 653-1130 sales.us@opterna.com
Europe +44(0)2031 301 716 sales.eu@opterna.com
Middle East +971 4 299 7676 sales.me@opterna.com
Asia Pacific +91 (0) 484 2104 779 sales.ap@opterna.com
www.opterna.com
Fiber Optic, Street Cabinets, TurnOpt MiniPOP 400 Featuresandbenefits
• Based on Opterna’s patented TurnOpt FDH with rotating fiber management frame • The unique design of this frame allows full access and utilisation of all four sides with only
front access • 100% factory pre-terminated and tested • Fully integrated solution, includes Fiber management, Active equipment and Electrical
distribution sections • Pre-terminated with cables to avoid splicing inside the cabinet • Over 25% CAPEX and OPEX savings compared to similar solutions • Decreased installation time • Simple, cost effective day-by-day operations: once the cabinet is installed and initially
connected – there is no need for trained staff with splicing and testing equipment • No consumables, no patch cords or pigtails– everything is already included in the TurnOpt
rotating frame
2
Data Sheet DSFO10004AR
Americas (703) 653-1130 sales.us@opterna.com
Europe +44(0)2031 301 716 sales.eu@opterna.com
Middle East +971 4 299 7676 sales.me@opterna.com
Asia Pacific +91 (0) 484 2104 779 sales.ap@opterna.com
www.opterna.com
Description
The TurnOpt MiniPOP-400 P2P FDH is an innovative Fiber optic management solution for FTTH deployment in rural areas with low and medium population density. The MiniPOP-400 is factory built and pre-terminated. It doesn’t require splicing in the cabinet and once the TurnOpt Mini-POP-400 is installed and connected to the fiber optic cables of the distribution network it offers extremely easy connecting, disconnecting and management of every single subscriber. It is based on Opterna’s patented TurnOpt Fiber Distribution Frame – an innovative fiber management solution that rotates 180° both sides. The MiniPOP-400 FDH is a fully integrated solution, that includes Opterna’s TurnOpt rotating frame pre-terminated and ready for 400 subscribers, a standard 19” mounting frame for active and passive components and a 300mm electrical equipment compartment.The product is fully assembled, the only thing to be done is to deploy the cabinet, splice the pre-terminated stubs to the cable distribution network and patch the patch cables to the active equipment panel. All customer patch cables are already routed and ready in a parking position on the TurnOpt frame. Technicaldata
Mechanical Value Dimensions including 19” and electrical frame H x W x D = 1445mm x 1500mm x 466mm Material CRCA, powder coated RAL 7032 Rack space capacity 30 rack Units Optical Fiber capacity (Fiber distribution frame) 864 fibers Active connection capacity 400 connections Outgoing cables 9 x 96 fibers duct installation cables Fiber type Singlemode G657a1 Connector type LC/APC (frame) and LC/UPC (rack side) Connector performance* Grade C or Grade B
*Different specifications available on request Environmentaldata
Description Value Operating temperature -40C to +65C 2011/65/EC RoHS Fully compliant
3
Data Sheet DSFO10004AR
Americas (703) 653-1130 sales.us@opterna.com
Europe +44(0)2031 301 716 sales.eu@opterna.com
Middle East +971 4 299 7676 sales.me@opterna.com
Asia Pacific +91 (0) 484 2104 779 sales.ap@opterna.com
www.opterna.com
DimensionalDrawing
Orderinginformation
Part number Description FDH400-864LCALCU-10 MiniPOP400 TurnOpt FDH pre-terminated with 9 x 96 fiber cables
with a 10-meter length and LC-APC to LC-UPC customer connection cables
Recommended