View
237
Download
7
Category
Preview:
Citation preview
3 I D
rillAir Y
35 / V39
4 REASONS to invest in DrillAir Y35
Drilling 500 meters per day is achievable with the DrillAir Y35. Two 4.5” geothermal wells can be finished in a single drilling day(1).
3 I D
rillAir Y
35
A single truck can carry both the compressor and the rig thanks to the short, 4.1 meter compressor frame.
DrillAir Y35 is 100% suitable for sustainable projects, thanks to compliancy with Stage IV emission standards.
DrillAir Y35 consumes less than 2.2 liters of fuel per meter drilled(1).
500 1 100% 2.2
(1) Dependent on various operational parameters. Please ask your Atlas Copco representative for more details.
5 I D
rillAir Y
35 / V39
High penetration rate with 35 bar pressure and 34.8m³/min (580l/s) flow means more meters drilled every day.
Dynamic Flow Boost®
increases flow from 34.8 to 39m³/min (650l/s) when flushing and during drill stem refill. It means faster flushing, faster stem refill and a shorter time to finish a well.
Compliancy with Stage IV means a healthier life for our children. It also allows you to work on sustainable projects and for environmentally conscious customers.
Atlas Copco XPR extends the working pressure range. It is based on patented technology and lets you set working pressure as low as 15 bar. The DrillAir Y35 is an efficient solution for geothermal foundation drilling and other applications.
5 I D
rillAir Y
35
HigherREVENUES
7 I D
rillAir Y
35 / V39
The combination of DrillAirXpert, the Atlas Copco screw element and a Scania engine provides high efficiency for a wide range of pressure and flow.
Drilling with 35 bar pressure allows you to drill more meters in an hour. Even though consumption per hour is higher, the cost per meter is lower. In field tests fuel consumption averaged 2 liters per meter drilled(2).
A single truck can carry both the compressor and the rig thanks to the DrillAir Y35’s short 4.1 meter frame, which helps to minimize transport expenses.
7 I D
rillAir Y
35
Lower fuel and transportEXPENSES
(2) Dependent on various operational parameters. Please ask your Atlas Copco representative for more details.
9 I D
rillAir Y
35 / V39
Lower maintenance and repairEXPENSES
9 I D
rillAir Y
35
Maintenance and repair costs are now predictable. The standard warranty covers parts within two years or 4,000 hours (whichever occurs first)(3).
An optional extended powerpack warranty covers engine parts and compressor elements within 4 years or 8,000 hours (whichever occurs first)(3).
Scania engines are engineered for maximum uptime. A modular product system and efficient logistics provide outstanding part availability. The Scania network includes over 1,000 workshops and more than 370 industrial engine specialists in Europe.
Three layer protection coating of all bodywork helps to minimize repainting costs. The top layer, a 100μm powder coat, creates a barrier against mechanical damage. The 100μm layer of primer protects from corrosion infiltrating under the coating. And in the event of coating damage, the steel is protected by a Zincor layer.
(3) Please ask your Atlas Copco representative for warranty conditions.
Scania
11 I D
rillAir Y
35 / V39
Higher residual value, lower depreciationEXPENSES
A single truck can carry both the compressor and the rig thanks to the short 4.1 meter frame. There is no need to invest in a second or a bigger truck.
To keep the canopy in good condition for a long period of time, we use three layers of protection: Zincor, primer and powder top coat. The compressor’s residual value will be higher if the bodywork is intact.
The compressor’s residual value is largely defined by the remaining lifetime of the engine at the moment of resale. Scania is well known for its excellent performance and durability with unique design features such as a built-in oil cleaner, saver ring and separate cylinder heads, all contributing to an extended service life and high uptime. The DrillAir Y35 complies with Stage IV emission standards, so it will have a higher value than similar Stage IIIA or IIIB equipment in the years to come. Moveover, the DrillAir Y35 does not require a particulate filter, which means its remaining lifespan will not be a consideration when you resell the compressor.
11 I D
rillAir Y
35
Scania
13
I DrillA
ir Y35 / V
39
REVE
NU
E
FUEL
EXP
.
LAB
OR
CON
SUM
AB
LES
TRA
NSP
ORT
ATIO
N
MA
INTE
NA
NCE
REPA
IR
DEP
RECI
ATIO
N
PRO
FIT
BEF
ORE
TA
X
Optional
Standard
Scania
HigherPROFIT
Optional
Y35: THE BETTERSTAGE IV ENGINE
1,000+
370+
0 costs
More than 1,000 Scania workshops in Europe
Over 370 engine specialists in Europe
There are no costs for particulate filter replacement as Scania Stage IV engines don’t require one
15
I DrillA
ir Y35 / V
39Stage IV is the emission standard for non-road engines that was introduced in Europe in January 2014. Stage IV-compliant engines REDUCE THE EMISSION OF NOX AND PARTICULATE MATTER TO NEAR-ZERO LEVELS.
Compressors with engines that comply with older regulations can still be used, but increasingly companies are required to minimize their environmental impact. This means using compressors that meet the latest emission requirements.
SCANIA STAGE IVScania is Atlas Copco’s preferred partner for meeting Stage IV standards with our high-pressure compressors. Scania’s Stage IV technologies are easy to handle, very reliable and do not affect torque or power output. Scania uses advanced exhaust gas recirculation (EGR) and selective catalytic reduction (SCR) technology that eliminates the need for particulate filters. By injecting a urea-based additive, AdBlue/DEF (diesel exhaust fluid), into the after-treatment system, a chemical reaction takes place that converts the harmful nitrogen oxides (NOx) into diatomic nitrogen (N2) and water.
DRILLAIR Y35 ENGINEThe DrillAir Y35 uses the Scania DC16, an 8-cylinder, 16-liter engine that produces 478 kW of power. Thanks to its compact V8 configuration and SCR module, the overall length of the DrillAir Y35 is just 4.1m. This means you can position it on a truck the same way as the previous DrillAir model.
LOCAL SUPPORTThe Scania network includes over 1,000 workshops in Europe, all within a two hour drive of your site. Every dealer has a service van to provide on-site service.
SCANIA
Features & Options DrillAir Y35
Other features:After-cooler, water separator and bypass valve; 500 hour service interval for the engine; Oiltronix®; pressure ����������� ���������������������������with water separator; spillage free ����� �����������������������������������������������������������������(4)
!��������������"�������������the 70l AdBlue ����(4)
Easily accessible centralized ��������������and outlet ball valve
Easy to operate with the Xc controller
Straightforward operation with external battery switch and access ������#����������level
Easy operation and reduced fuel ������#�����������������������
$�����#��������#��������%������when you need it by operating the preheater ������������������������#����
Additional safety with the �&��'��#������suppression ������
Safe operation with external LED lights
Features:
Options:
Other options:Cold start; XPR;wagon under-carriage
(4) Dependent on various operational parameters. Please ask your Atlas Copco representative for more details.
19
I DrillA
ir Y35 / V
39
Stage IIIACaterpillar
(�)��*��'����+�).��/����$1
Stage IV Scania
!(�*��2)�+�*.��/")��$1
4 DIFFERENCES that matter
(5) With optional XPR system
Length (without undercarriage)
Minimum pressure
Canopy coating
Engine
XRYS577
4.5m
22 bar��������3��4���6�
Y35
4.1m
15 bar+�1
��������3��4���4���6�
Air delivery at 75% load @ 35bar 84.4 l/h 72.3 l/h
21
I DrillA
ir Y35 / V
39
TECHNICAL DATA Y35 2��Pressure range bar 35-22 25-14Extended pressure range (with optional XPR) bar 22-15 NA
Nominal flow m³/min (l/s) 34,8 (580) at 35 bar 39,3 (656) at 25 barFlow in dynamic flow boost mode m³/min (l/s) max. 39.0 (650) at 22 bar 43,3 (722) at 17 barEngine speed range rpm 1200-1900 1200-1900 Engine make Scania DC16 V8 Scania DC16 V8Emission compliance Stage IV Stage IVEngine power (DIN 627 1) kW 478 478AdBlue tank capacity l 70 70
DIMENSIONS AND FUEL CAPACITY WAGON SUPPORT MOUNTED HIGH SPEED TRAILERDimensions m 6,2x2,2x2,5 4,1x2,2x2,5 6,9x2,4x3,1Fuel tank capacity l 750 1200 1200Weight (excl. fuel, AdBlue) kg 6781 6200 8678Weight (incl. fuel, AdBlue) kg 7540 7342 9820
STANDARD FEATURES OPTIONSDrillAirXpert Work zone lights
Aftercooler and Waterseparator Extended pressure range (XPR)OilTronix Remote control
V-notch ball valve Preheater with GSM start3 step fuel filtration Cold Start equipment
3 x layer corrosion protection Shut down valve
External battery switch Automatic fire supression system Manual fire extinguisher
COMMITTED TO SUSTAINABLE PRODUCTIVITY
We stand by our responsibilities towards our customers, towards the environment and the people around us. We make performance stand the test of time. This is what we call - Sustainable Productivity
2958 0270 01 - Printed in Belgium – Subject to alteration without prior notice. Copyright 2015, Atlas Copco Airpower n.v., Wilrijk, Belgium.www.atlascopco.com
Recommended