Drawing Setup Intro - Iowa State Universityhome.engineering.iastate.edu/~jcshahan/Inventor...

Drawing – SetupIntro

Using Autodesk Inventor

3/24/2014 Inventor - Drawing Setup Intro -jcS

1.INITIALIZATION

3/24/2014 Inventor - Drawing Setup Intro -jcS

a. Startup

Inventor Projects (Verify)

Project Name:

Other

3/24/2014 Inventor - Drawing Setup Intro -jcS

b. New Drawing

NewEnglish

ANSI(in).idw

3/24/2014 Inventor - Drawing Setup Intro -jcS

c. Drawing Layout

Note: oC (17in.x22in).

oDrawing Area vs. Titleblock

oResources

oFormats

oBorders

oTitleblocks

oSheets

3/24/2014 Inventor - Drawing Setup Intro -jcS

2. STANDARD ITEMS

3/24/2014 Inventor - Drawing Setup Intro -jcS

a. Drawing - iProperties

Drawing

<RMB> ipropertiesoGeneral

oSummary

oProject

oStatus

oCustom

oSave

3/24/2014 Inventor - Drawing Setup Intro -jcS

b. iProperties - Summary

Drawing

<RMB> iProperties - Summary oTitle

oAuthor

oCompany

3/24/2014 Inventor - Drawing Setup Intro -jcS

c. iProperties - Project

Drawing

<RMB> iProperties - Project oPart Number (File name)

oCreation Date

3/24/2014 Inventor - Drawing Setup Intro -jcS

d. iProperties - Status

Drawing

<RMB> iProperties - Project oChecked By

oChecked Date

3/24/2014 Inventor - Drawing Setup Intro -jcS

3. SAVE

3/24/2014 Inventor - Drawing Setup Intro -jcS

a. Save

SaveWorkspace

File name:

Save as type

3/24/2014 Inventor - Drawing Setup Intro -jcS