DESCRIPTION LESSON, BREAK AND BELL RINGING … · The SDM-10 school bell controller is designed for...

DESCRIPTION

MAIN MENU

TIME SETTING AND WINTER / SUMMER TIME TOGGLING

DATE SETTING

OPERATING MODE CHANGE (AUTOMATIC, MANUAL, OFF)

LESSON, BREAK AND BELL RINGING DURATION SETTING

HOLIDAY BREAK SETTING

-currenttimesetting;enterbypressingOK;HOUR-with selecthourinoneofthefollowingformats:1-24 ,1-12 (AM),1-12 (PM),acknowledgebypressingOK;

MINUTES-with cursorsselectminutesandacknowledgebypress-ingOK;

Minutesacknowledgementcausesseconds resetandentering thetimesettingwindow;

-winter/summertimetogglemodeselection: -auto-matictimechangingonthelastMarchSunday,at2:00,intosummertimeandonthelastOctoberSunday,at3:00intowintertime -winter/summertimetogglemanual;enterbypressingOK;

, MODESETTING-with select or andpressOK;afterselecting ,winter/summertimewillbetoggledautomaticallyindependenceofthecurrenttimeanddate;after modeselectingyouenterthenextwindow;

With selectwinter/summer,where: iswintertime, issummertime;ifthetimeiconischanged,thetimerwillcorrectthecurrenttimeappropriately;acknowledgeselectionbypressingOK;

Afterthetimemodeselectingwinter/summertimetogglewindowwillbeopen.

It is possible to exit any submenu to a higher level, at any moment without settings saving by means of pressing or key.

-thecurrentdatesetting;enterbypressingOK;RYEAR–with cursorsselectayearandacknowledgewithOK;allow-ablesettings:2000÷2099;

MONTH–with cursorselectamonthandacknowledgewithOK;DAY-with cursorsselectthemonth’sdayandacknowledgewithOK;theunitisprotectedagainstenteringincorrectdaysforthegivenmonth (leapyearsaccounted)andcalculates theweek’sdayon thebasisofthesetdate;

Afteracknowledgement thedatesettingwindow isopenandcurrentwinter/summertimeisset,iftheautooptionisactive .

It is possible to exit any submenu window at any moment without set-tings saving by pressing or key.

-week’sdays-automaticmode

-manualmode-wintertime-summertime-bellringing-Schoolyearactive

, -settingbanks-lessonsbeginning

-lessonduration-bellringingduration

-breakduration-alarmmode

-day-year

-automatic

-user’s

-ON/OFF

Button description •themainwindow–theautomaticmodeenteror,iftheautomodeisalreadyON,switch-OFF; •theotherwindows–exittoahigherlevelwithoutdataenteredsaving;

•themainwindow-themanualmodeenteror,ifthemanualmodeisalreadyON,switch-OFF; •theotherwindows–exittoahigherlevelwithoutdataenteredsaving;

•themainwindow–themainmenuenter; •theotherwindows–asubmenuenterorthesetvalueacknowledgement;;

•window/optiontoggleorthesetvalueincrease/decrease.

MenuenterbypressingOK;menuitemsscrollingbemeansofthecursors . Function Description

LESSON,BREAKANDBELLRINGINGDURATIONSETTING CURRENTTIMESETTING CURRENTDATESETTING WINTER/SUMMERTIMESETTING HOLIDAYBREAKSETTING

Themanualopmodechange(thebellmanualswitchingON/OFF)–ifthemainwindowisopenandtheautomaticmodeisset pressingthekey willcauseenteringthemanualmode ;successivekey pressingwillcausechangeoverbetween & themanualmodeandtheOFFmode..Theautomaticmodechange(systemoperatingaccording to theprevioussettings)– if themainwindowisopenandthemanualmodeisset pressingthekey willcauseenteringtheautomaticmode ;successivekey pressingwillcausechangeoverbetweentheOFFandautomode( & ).ExitfromtheOFFmode(therelayisOFFpermanently)–ifthemainwindowisopenandtheOFFmodeisset, pressingthekey willcauseenteringthemanualmode ,pressingthekey willcauseenteringtheautomaticmode .

SDM

- 10

- setting: lessonbeginning time, les-son duration, successive breaks durationandthebellringingduration;enterthemodebypressingOK;

With selectthesettingsbankforalltimesettings; it is possible to select one of thebanks: or ,whereitispossibletosetvarioustimes(e.g. -stdlessons,

-shortlessons);thedefaultactiveoneis ;switchingtothebank isreal-izedbymeansofIN2controlinput;inorderto enter settings edition for the given bankpressOK;

, , , -windowsfortimesettings;thewin-dowstogglingbymeansofthecursors ;

Window - - lesson beginning hourand lesson days setting (these days thebell will be operating in the auto mode):press OK to enter; with set the les-son beginning hour; acknowledge with OK;

with setthelessonbeginningminuteandpressOK; with selectlessondays(fortheautomaticmodesettingforthebell);therearethreeweekdivisionmodesavailable:Monday–Friday,SaturdayandSunday,allweek;afteracknowledgementwithOKthelessondurationsettingwin willbeopen;

Window - - lesson duration setting inminutes:pressOK toenter; with selectlessondurationinminutes;afteracknowledgementbypressingOKthebellringingdurationsettingwindowwillbeopen ;

Window - -bellringingdurationsettinginseconds:pressOKtoenter; with cursorsselectbellringingdurationinseconds;afterselectionacknowledgementbypressingOKthebreakdurationsettingwindowwillbe open;;

Window - -thebreakdurationviewingandsettinginminutes:pressOKtoenter; with cursorsselectthebreaktosetandpressOK; with selectthebreakdurationwithintherangebetween0and60minutes;acknowledgewithOK; , with cursorsselectsuc-cessivebreakno.toset;maximumnumberofthebreaksis20 ;entereditionbypressingOK;the marker is designed for the last break marking – the ringing program will be running until the first marker near the break no. is met (further programmed breaks will not be realized).It is possible to exit any submenu to a higher level at any moment, without settings saving, by means of pressing the keys or .

Displayed items and messages description

Weekdivisioncombinations 1 2 3

- holiday break setting;enter the mode by pressingOK;

, With setactivity orinactivity for the holidaybreak;acknowledgebypress-ingOK;

Selecting causes he holi-day break settings main win-dow ;

i With cursorsselect thebeginning day or theendingday fortheholidaybreak;pressOK;;

With cursorsselectanappropriateyear;acknowledgeselectionbypressingOK;With cursorsselectamonth;acknowledgeselectionbypressingOK;KWith cursorsselectthemonth’sday;acknowledgeselectionbypressingOK;Afterthesettingsacknowledgementtheholidaybreakendingsettingwindow willbeopen;;, i Inthesamewayasfortheholidaybreakbeginningdaysettheyear,monthandday;Afterthesettingacknowledgementtheholidaybreakbeginningsettingwindowwillbeopen .

It is possible to exit any submenu to a higher level at any moment, without settings saving, by means of pressing the key or .

SDM-10,SDM-10/USCHOOLBELLCONTROLLER INSTRUCTIONMANUAL

Zakład Mechaniki i Elektroniki ZAMEL sp.j.

J.W. Dzida, K. Łodzińskaul.Zielona27,43-200Pszczyna,Poland

Tel.+48(32)2104665,Fax+48(32)2108004www.zamelcet.com,e-mail:marketing@zamel.pl

MAIN RESET

CONNECTIONSASSEMBLY

DEVICE CONTROL

Therearetwoindependentcontrolinputs:● Control input 1 (alert) – afterLorNsignalcomesontheinputterminalthemanualopmodeisset

atonce andtwooutputrelaysareON,andthedisplayshowsthemessage .AftersettingtheinputtriggeringOFF,therelayswillbeOFF,buttheunitwillremaininthemanualmodeforabout1minute,andthenwillentertheopmodesetbeforeALERTinputoperating.

● Control input 2 (bank 2) – afterLorNsignalcomeson the input terminal thedisplayshowsandthebank2issetactive–thesettingsdeclaredfor intheautomode (e.g.short

lessons)arebinding.AftersettingtheinputtriggeringOFFsettingsprogrammedfor willberestored(e.g.standardlessons).

CASING DIMENSIONS

PRODUCT FAMILYTheSDM-10controllerisamemberof

theSDMproductfamily.

1. Disconnect the electric network bymeansofanappropriatecut-off,cur-rent-limiting circuit-breaker or sepa-rator.

2. Check if there is no any voltage be-tween power leads by means of an appropriate gauge.

3. Mount the SDM-10 controller on TH35rail.

4. Connect the system leads to theterminalsaccording to theelectricaldiagram.

5. Connectpowersupplycircuit.

UNIT DIAGRAM

A2A1

IN

μC

KEYB. LCD

RTC

PSU

In order to cancel the timer settings time,date,datafunctionactivity,etc.)Itisneces-sary, in themainwindow, topressandholdsimultaneously( i )for3seconds;

All the display fields will be illuminated;;Afterawhilethetimerwillenterthedateandtimesettingmode.

NOTE: In order to cancel all the saved programs it is necessary to hold OK key additionally.

SDM - xx/UPowersupply:SDM-10:230VSDM-10/U:24÷250V SDM-10/U:30÷300V

Deviceversion:10-basic

Devicetype

Controlinput1(ALERT)

Controlinput2(BANK2)

L(+)N(-)

L(+)/N(-)

APPEARANCE

FEATURES

TECHNICAL DATADESCRIPTIONSDM-10

Powerterminals: A1,A2

Ratedvoltage: SDM-10:230V (-15÷+10%)SDM-10/U:24÷250V ,30÷300V

Ratedfrequency: 50/60HzRatedcurrent: 2W/14VA

Channelsquantity: 1Program: mannualcyclebellcontrol

Operatingmodes: manual,automaticSummer/wintertimechanging: automatic,manual

LCDpanelilluminationcolour: amberExternalinput: yes

Timemeasureaccuracy: max.±1s/24hprzytemp.25°CClocksustaintime: 3years

Programsustaintime: 10yearsTriggerterminals: IN1,IN1,IN2,IN2

Relayoutputterminals: 11,12,14,21,22,24Relaycontactsparameters: 2NO/NC-16A/250VAC14000VA

Connectionterminalsquantity: 12Connectionwiresection: 0,2÷2,50mm2

Operatingtemperature: -20÷+60oCOperatingposition: optional

Casingfastening: TH35rail(accordingtoPN-EN60715)CasingIP: IP20(PN-EN60529)

Protectionclass: IIOvervoltagecategory: II

Pollutionlevel: 2Dimensions: double-module(35mm)90x5x66mm

Weight: 140gStandardconformity: PN-EN60730-1;PN-EN60730-2-1;

PN-EN61000-4-2,3,4,5,6,11

,Easy time table programming algorithm ی,Easy lesson time changeover: normal / short ی,RTC circuit and built-in calendar ی,Bell ringing duration setting possible یAlert bells programming possible ی-control inputs for running programmed func 2 ی

tions, Two power supply versions: 230 V or 24 ÷ 250 ی

V,30÷300V ,Relay output — two changeover contacts ی

maximumload16A, ,Clock and program data battery sustain ی.LCD display LED illumination ی

TheSDM-10schoolbellcontroller isdesignedfor acoustic signalling control at schools usingtheschoolbells(e.g.DNT-212,DNS-212,DNT-212M,DNS-212M). Thesystemcontrol runs inanautomaticmodeaccording to thepresetpro-gram. Program setting is operated by means ofselectingthelessonduration,breaksdurationanddefiningthebeginninghour.Thesystemisreadytoimplementsomespecialsfunctions(alertbells,shortlessons)bymeansofprogrammablecontrolinputs.Thecontrollermaybemanufacturedasakitforassembling,EW-01ElectronicSchoolBell.In case of power supply malfunction the unit battery sustain enables all settings saving and maintaining.

Thedeviceshouldbecon-nected to a single-phasesystemaccordingtocurrentstandards. The deviceconnections will be des-cribed in this manual. Only

qualified electricians are allowed to mount, connectandadjustthecontroller.Itisneces-sary to read this manual before the devicemounting.Donotdisassemblythedeviceca-singoryouwill loseanywarrantyrightsandexposeyourselftotheelectricshockhazard.Beforemountingoperationmakesureofdi-sconnecting the connection wires from theelectricnetwork.Useacross-headscrewdri-verof3.5mmdiametertomountthedevice.Thecontrollershouldbecarried,storedandusedinanappropriateway.Donotmountthedeviceincaseofanyunitpartslack,damageordeformation.Incaseofmalfunctionpleasenotifythemanufacturer.

CAUTION

Display

Relayoutputterminals(12,11,14,22,21,24)

Controlbuttons

Triggerterminals(IN1,IN1,IN2,IN2)

Powerterminals(A1,A2)

Currentdate(dd-mm)

Week’sday

Currenttime(gg:mm:ss)

Automode

Manualmode

Winter/summertime

Ringingindicator

Schoolyear

indicator

Schoolbell

WARRANTYTheproductwarrantyisforaperiodof24months

Dealersignature&stamp,purchasedate

1.ZMIEZAMELSP.J.assures24monthsguaranteefortheproduct.2.Themanufacturer’sguaranteedoesnotcoveranyofthefollowingactions:a)mechanicaldamageduringtransport,loading/unloadingorunderothercircumstances,b)damagecausedbyincorrectproductmountingormisuse,c) damage caused by unauthorised modifications made by the PURCHASER or any third parties to the product or any other devices

neededfortheproductfunctioning,d)damagecausedbyActofGodoranyotherincidentsindependentofthemanufacturer.3.ThePURCHASERshalllayanyclaimsinwritingtothedealerorZMIEZAMELSP.J.4.ZMIEZAMELSP.J.isliableforprocessinganyclaimaccordingtocurrentPolishlegislation.5.ZMIEZAMELSP.J.shallprocesstheclaimatitsowndiscretion:productrepair,replacementormoneyreturn.6.Themanufacturer’sguaranteeisvalidintheRepublicofPoland.7.ThePURCHASER’sstatutoryrightsinanyapplicablelegislationwhetheragainsttheretailerarisingfromthepurchasecontractor

otherwisearenotaffectedbythiswarranty.