View
11
Download
1
Category
Tags:
Preview:
DESCRIPTION
Decorating Country Tin
Citation preview
ora
Published by
The Country LoftNewfield, N. H.
*b-2- B{5 $cZ
DECORATING COUNTRY TIN
By
Audrey Chandler Woodman
Price One Dollar
Published by
THE COUNTRY LOFT Newfield, N. H.
Copyright 1947
by
Audrey Chandler Woodman
TABLE OF CONTENTS
PAGE
Foreword 4
Country Tin 5
Country Tin Painting 5
Materials for Brush Stroke Painting 6
Mixing Colors 8
Practicing Brush Strokes 9
Care of Brushes 9
Painting a White Band 10
Putting a Design on Supersee 10
Designs 11
Preparing Tin for Decoration 23
Painting a Design on Tinware 25
Striping 27
Finishing 27
Stenciling 29
Materials for Stenciling 29
Preparing and Cutting Stencils 30
Applying Stenciled Designs on Tinware 31
Overtoning Stencils in Color 32
Striping and Finishing Stenciled Tin 32
Cover: Child's toy teapot, found in Maine.
Simply decorated in Red and Yellow
on a Green background.
Foreword
The purpose of this booklet is to help those who
wish to pursue the fascinating hobby of tin deco-
ration in the Early American Manner.
If at all possible, one who wishes to become
proficient in this craft should study under one of
the capable teachers available in many commu-nities.
If personal instruction is not available, we
feel that the next best thing to do is to obtain
through a library the excellent book written by
the late Esther Stevens Brazer, "Early American
Decoration". Another very fine book which is
obtainable in many libraries is "Early American
Stencils on Walls and Furniture" by Janet War-ing.
As both of the above books are temporarily
out of print, we have written this booklet to help
you in getting started in this absorbing hobby.
April 15, 1947
DECORATING COUNTRY TIN
COUNTRY TIN.
In Early American homes there were many examples
of bright and useful tin pieces made by the tinsmith
of the early 19th century.
In the Spring the tinsmith loaded his oxcart with
his skillfully decorated wares and started on his waythrough the countryside. Imagine what a welcome he
received! Our ancestors loved brightness and color,
just as we do, and after a long, lonely winter the tin-
smith brought news of the countryside along with
his wares.
Among Country pieces were Coffin Trays, Bread
and Fruit Trays, Tea Pots, Canisters, and Boxes of
many sizes.
COUNTRY TIN PAINTING.
We find many charming designs on these old pieces,
simple roses, fruit, sunbursts, and gay borders of
berries and leaves- -the latter often on bands of
white. These were painted in skillfully formed brush
strokes of red, green, and yellow, on backgrounds of
black, asphaltum, and many other colors.
The beginner, however, will find it easier to
work on the black background,
As a source of design the old pieces are valu-
able, and whenever possible an old design should be
carefully recorded.
Many want to start right in painting the morecomplicated Chippendale and Gold Leaf designs, not
realizing that there is no better foundation for this
work than mastery of the brush stroke painting.
It is of great importance that a nice piece of old
tin, or a well-made and authentic reproduction, be
decorated in a manner suitable to its date and style.
The Chippendale trays had their own Chippendale
designs --Lace -edged and Gallery trays their own,
too. Similarly, simple Country Tin was decorated
in a manner appropriate to its simple lines.
Care should be taken not to confuse the different
types of designs, and to use the proper one for the
particular piece of tin we intend to decorate.
MATERIALS FOR BRUSH STROKE PAINTING.
A minimum list of materials for brush stroke paint-
ing would include the following:
About one yard of Supersee, Tracolene, or Pro-
tec toid.
Pad of ordinary tracing paper.
Scotch Tape.
Drawing Pencils #2-1/2 and #2H.
Blackboard chalk or Magnesium Carbonate, ob-
tainable at any drug store.
Fine, square -tipped, 3/4" long, French Quill
Brushes, sizes #1 and #3. If these are un-
6.
obtainable, fine -pointed Quills (or Sable
Water Color Brushes) in these same sizes
will do. Some prefer the latter.
Show Card Brushes, sizes #6 and #8.
A fine 1-1/2" Striping Brush.
Round Toothpicks to use as handles for the tini-
est quills.
Two or three best quality Varnish Brushes; Grum-
bacher,or equal, for applying Flat Black and
varnish.
Rust Remover.
Metal Priming Paint.
Flat Black Paint; Lowe's, Sherwin-Williams,
or equal.
Gloss Varnish; Wheeler's Bar-Top, Sherwin-
Williams Mar-Not, Super Vaispar, or equal.
Turpentine, for washing brushes.
Carbon Tetrachloride (Carbona) for erasing
mistakes.
The Following Tube Colors:
Sign Writer's Red in Japan, Sign Craft Red in
Japan, or Permanent Vermillion in Japan.
Chrome Yellow Medium in Japan.
Raw Umber.
Black in Japan.
Prussian Blue.
Alizarin Crimson.
Yellow Lake.
Yellow Ochre.
Phillip's White.
For finishing, the following:
The finest Wet-or-Dry Garnet sandpaper.
Fine Pumice.
Rottenstone (very fine).
Crude Oil or Mineral Oil.
7.
MIXING COLORS.
RED—Depending upon the shade of red pre-
ferred, the Red in Japan can be used as it comes from
the tube, or a little Chrome Yellow Medium in Japan
can be added to make the lighter vermillion, used so
often in the old Country Tin painting. A little RawUmber can be added to make an older, softer red.
GREEN—Green can be mixed from Prussian
Blue and Raw Umber with a little yellow added to
make a rather dark, olive green.
YELLOW—A little Raw Umber can be added to
Chrome Yellow Medium to make an old mustardy
yellow.
BLUE—Blue is occasionally found in Country
Tin painting. Prussian Blue, White, and Raw Umbercan be mixed to make a soft, grayed, not too light
blue.
Note—Add a little Raw Umber to White when
used alone, as well as to the thin, White and Alizarin
overtones.
ANTIQUING ---An "old look" can be produced by
cautiously adding a little Raw Umber to our first few
coats of varnish until the desired effect is obtained.
Caution should be used not to darken the work too
much, and the last coat of varnish should be used
clear.
ASPHALTUM—A Transparent Asphalturn back-
ground was used on much of the old tin. It can be
bought in a hardware store and thinned with varnish
before applying. However, it is tricky to use prop-
erly, and does not seem to dry well. We therefore
do not recommend it for beginners.
8.
PRACTICING BRUSH STROKES.
It is important that we make our brush strokes as
perfectly as possible. This can only be done with a
great deal of practice. It is well to practice these
brush strokes on paper. A piece of newspaper or
shelf paper painted with one coat of Flat Black will
do very nicely.
Lay the brush down flat for the large end of the
stroke, lifting it to bring the stroke to a fine point.
Always try to keep the edges clean and the curves
good.
We cannot expect to reach perfection without a
great deal of practice, but we always try to make the
strokes correctly, cleaning them up afterwards to
give the desired effect. We always paint toward our-
selves, turning the object we are decorating to make
this possible. Using the little finger to steady the
hand will be ahelpin making clean strokes. Remem-ber that the old painting was done thinly, and try
never to use too much paint.
CARE OF BRUSHES.
The small brushes should be washed thoroughly in
turpentine, then soap and water, after each using.
The Varnish brushes must be kept very clean by the
same procedure, and then wrapped in clean paper to
keep the dust from them. Some prefer to rub a little
Vaseline into the bristles of the small brushes after
cleaning in order to keep them soft and pliable.
9.
PAINTING A WHITE BAND.
The bands of white used on many of the Country Tin
pieces were not dead white, but had a grayed, trans-
lucent look, which is most attractive under the col-
orful red and green designs painted over them.
To mix the white for one of these bands, add a
little Raw Umber and a speck of Yellow Ochre to
Phillip's White. Mix this with some varnish to about
the consistency used for striping.
It is a good idea to paint guide lines with a fine
striping brush, and then fill in with broad, even
strokes, made with a large show card brush.
PUTTING A DESIGN ON SUPERSEE.
The best way to record a design for future use is to
paint a copy on a piece of Supersee. Fasten the Su-
persee with Scotch Tape over the pattern to be cop-
ied. Now paint all undercoats of flowers, brush
strokes, and leaves. Lift the pattern from under the
Supersee, fasten the latter to a piece of cardboard,
and paint the overtones and the details. Scotch tape
the painted pattern, when completed, to a piece of
heavy black paper and protect it with a wax paper
envelope.
Putting a design on paper in this manner is very
good practice and should be done by a beginner be-
fore attempting to put a design on a piece of tin.
10.
DESIGN FOfc_
£/
ALL FilUil~ - V£R.n Ik-MOiV
3 G^eerM
YfLkP*/ OV£R.Toi\(tS OMG-f^.eEM B^ush stroke S
II.
Xo
c/3
Z
ro
Zai
z
Q
IZ.
o
IP 2
Y-
CD
21
>
>*
o
>O
UJIP £UJ -
o H
1/3 .X
QD
O
-J
>
13.
Stencil for Apple Tra^ -
^
\Wcom
USE. cxs Four, "sides
14.
Aa
Bottom
Black B^ck^round -
RjCH GOkO Poi/v/ftER,
AM^^RUN CRinSON IvHEUE SHOWN
On pkOw/ER,IS
filL FLOWERS hn&6uC)S- VER.MIL.UION
with Ptu^HR-trvCR/M*SOlN <^Vr\Jb WHITE.OVEfSTONE'S.
Leaves ^rs>& "stems-
G-R.E&N .
VEIN5 ANb ,5Mrti-k
fc>OTT> - YELLOW.
FlME STR.IPE IN
OUTSfOe E6&E
Tuv/o F.NE ^Tripes
Floors ©F TK^•k " "P^orn «oiG>
Place tracing- -so
TH-A-T VEl^vf TIP O^
0ASE O^ TKAVf.
Coffin tray — l
16.
n.
<Y
d
yt
h
tOJ
QL
(Q
U.
o
ztu
IP
g3O
Z
z:
Z2 z
K Hi
<3
5o
- < tv^i
oQ
u
zoo
ro
z
)r
Zs?
UJ
2o.
o
PREPARING TIN FOR DECORATION.
If tin to be painted is new, it should be thoroughly
scrubbed in hot, soapy water to remove any film of
oil or grease, however slight. It should then be
rinsed thoroughly in hot water and immediately dried.
This should be followed by a light sanding with
very fine Garnet Wet-or-Dry sandpaper. Again wash
well and apply priming coat as soon as thoroughly
dry. The priming coat should be any standard Metal
Priming Paint which can be brushed on, such as
Lynch's Red Sanding Primer, or equal.
If none of these are immediately available, a
priming coat can be made by using Flat Black paint
with a little varnish added, or a coat of clear var-
nish can be used. However, by all means use a
standard metal primer if possible.
The purpose of a priming coat is to effect the
best possible adherence between the bare metal and
the subsequent coats of paint. It must be put on the
surface to which it is meant to adhere. If it is ap-
plied on top of dirt, oil, or rust, which will sooner
or later come off, the paint will, of course, come off
too. Nothing is more disheartening than to spend
hours decorating a piece of tin only to have it ruined
later on due to poor adherence between the metal and
the paint.
Many who decorate prefer working on tin, either
old or new, which is already prepared for them,
ready for their design.
A word of caution to beginners, however, is in
order. They are very likely to make mistakes in
23
painting on their designs. This can be readily cor-
rected by touching up around the design with Flat
Black paint. This touching up will not show when
varnished providing the touch-up paint comes from
the very same can as the background coat. Flat
Black paint has a surprising number of shades.
If tin to be painted is an old piece, all paint should
be removed either by using a standard paint remover,
or boiling the article in a solution of half a box of
Oakite to about a gallon of water.
The above treatment will not, however, removeany rust. This must be entirely removed before
painting for the reasons given above.
Rust can be removed by using plenty of "elbow-
grease" and a rust remover; Rusticide, Sano-rust,
Zud, or equal. They can be purchased at most hard-
ware stores.
Every bit of rust remover must be removed fromthe tin before painting. Use Carbon Tetrachloride
and then scrub the tin with hot, soapy water, and wipe
dry.
Now, apply your priming coat of paint immediate -
ly as the chemical process of rusting (oxidation) be-
gins almost at once after the above treatment.
Apply two or three coats of Flat Black, allowing
twenty -four hours between coats. Sand lightly be-
tween each coat. Your piece of tin is now ready for
the design.
24,
PAINTING A DESIGN ON TINWARE.
Copy design to be used on a piece of ordinary trac-
ing paper, using a pencil with a #2-1/2 lead. Somemay prefer a slightly harder or softer lead. Now,
cover the back of the tracing with chalk, smoothing
off the excess with the hand. Place tracing correctly
on the article and trace over the design, this time
using the #2H drawing pencil. The tracing can be
secured to the piece of tin by using Scotch Tape. The
placing of the design is most important. Look it over
carefully before starting to paint. If the position of
the design is not correct it will be well worth the
necessary time to wipe off the chalk lines with a
cloth and retrace it on the tin. It will not be neces-
sary to re -chalk the tracing.
Varnish is used as a medium with the oil and
Japan tube colors in decorating tin. Put a little var-
nish in a bottle cap or jar cover, and pour someturpentine into a small jar or glass for cleaning the
little brushes. Squeeze a little of the colors to be
used on a piece of folded newspaper, wax paper, or
a large tin can cover, mixing, as needed, with a pal-
let knife or matchstick.
You are now ready to paint in the flat, opaque,
flower 01 fruit forms in Vermillion, using a large
brush if the areas are large. Dip the brush into the
varnish, filling it with the medium, and then pull it
through the paint. Practice will soon give you the
"feel" of the amount of paint to use.
To make the fruit or flower forms opaque, it
sometimes seems necessary to use two coats of
Vermillion, twenty -four hours apart. This is es-
25.
pecially so if the forms are large. Next, paint in the
green leaves, or green and yellow brush strokes, as
the case may be. Of course, it is best to let the Ver-
million dry completely if there is danger of smudg-
ing it while painting in the green.
When the basic coats of Vermillion and green are
perfectly dry, we apply our overtones. The types of
overtones vary in the many different brush stroke
designs, but we will use as an example the more or
less usual, thin, Alizarin and white brush strokes.
First, paint thinly the Alizarin overtones. This
means using more varnish than usual to thin the
paint to a slight translucency. However, great care
must be taken to use a minimum of this mixture on
the brush in order to make a clean stroke which will
not creep or run. Make these overtones as perfectly
as possible as the form of our fruits and flowers is
governed by our dark and light overtones.
When these overtones are dry, paint in the white
overtones in the same manner. Perhaps it would
be well for a beginner to trace the outline of the over-
tones on the basic flower form from a separate
chalked tracing, but the correct way, of course, is
to do them free hand.
Now, paint in any overtones or veining there maybe on the leaves. Next comes the border, which maybe a brush stroke border in yellow, or striping, or
both. The brush stroke border can be carefully
traced on, but as you become more adept, you will
be able to do it free hand.
26.
STRIPING.
It is best to stripe twenty -four hours after applying
one coat of varnish to the piece of tin being decorated.
Mix the tube paint and the varnish together in a
jar cover to a consistency that will flow easily. Draw
the striping brush through this mixture, then across
a piece of newspaper, watching for specks of paint
that would mar the stripe. Practice is the only thing
that will tell you how much paint to leave on the brush.
Holding the brush between the thumb and forefinger,
and, if possible, running the third and fourth fingers
along the edge to steady the hand, pull the full length
of the brush toward you as smoothly and steadily as
possible.
FINISHING.
The first and most important thing to remember
about the finishing of a decorated piece of tin is to
keep dust from getting into the varnish coats. Have
the article absolutely dust free. Wash well with
soapy water, rinse, and dry with an old silk stocking
or other lintless cloth.
Keep the varnish brush perfectly clean and al-
ways covered when not in use. Never dip a brush
directly into the varnish can or leave the cover off
the can. Also, never shake a can of varnish before
using, as this will form a multitude of minute air
bubbles which will not disappear for some time.
These air bubbles, picked up on the brush and trans-
ferred to the tin, interfere with a nice smooth finish.
27.
Have the tin article and the can of varnish warmbefore starting. Now, pour a little of the varnish in-
to a clean jar cover, and fill the brush. Flow the
varnish on smoothly and evenly, neither too sparing-
ly nor heavily enough to cause the varnish to run. In
the case of flat pieces, such as trays, do not stand
them on edge while drying as this, also, may cause
the varnish to run.
Cover the newly varnished article with a paste-
board box that will allow plenty of room for ventila-
tion. Leave this cover on until the varnish coat has
reached the dust free stage. Each coat should be
allowed to dry twenty -four hours before re -varnish-
ing, and forty -eight hours before rubbing with pum-ice and water.
After the article has had two coats of varnish,
rub with a soft, wet cloth dipped in pumice. Continue
this procedure until a lovely, smooth finish has
been obtained, smoothing out all dust specks. The
last coat of varnish is rubbed with pumice and crude
oil, and then given a final polishing with rottenstone
and crude oil. Care should, however, be taken not to
rub hard enough so as to rub through the coats of
varnish, especially on the edges of our tin.
The Bar-Top or Spar varnishes are very neces-
sary for trays, but for the smaller things that do not
have to be water and alcohol proof, a good grade of
satin finish varnish can be used, and the rubbing
down omitted. For all varnishing the day should be
clear and the temperature above 70 degrees.
28.
STENCILING.
Much of the simple tin was stenciled. The bread
and apple trays, tea caddies, boxes, etc., were amongthe articles treated in this manner.
Most of the simple tin was stenciled with a com-plete design, cut in one unit. Other more elaborate
types of stenciling were built up from several small
units. In these built-up stencils, one leaf, one grape,
and one fruit might be used more than once, and even
reversed, to help make a complete design.
LIST OF MATERIALS FOR STENCILING.
A minimum list of materials for stenciling would in-
clude the following:
About one yard of Architect's Linen.
One pair of sharp-pointed embroidery scissors.
One Exacto knife, Model #1, with the smallest
pointed blade, Model #11.
A small piece of silk -backed velvet or chamois.
The following bronze powders, very finely ground:
Rich Gold.
Orange Gold.
Pale Gold.
Aluminum.The following transparent colors:
Alizarin Crimson.
Prussian Blue.
Yellow Lake.
Raw Umber.Gloss Varnish; Wheeler's Bar-Top or equal.
29.
PREPARING AND CUTTING STENCILS.
The stencils are cut from the best quality Architect's
Linen, with fine -pointed embroidery scissors where
curves of small radii are involved. On more open
curves, or straight lines, the Exacto knife does an
excellent job. On very fine lines, such as stems,
etc., it is best to cut one side of the line with the Ex-
acto knife, and then pare it down to the desired width
with the embroidery scissors. Small dots can be
cut with the very tips of the embroidery scissors.
Carefully, well cut stencils are their own re-
ward, and, if proper care is taken, they can be used
practically indefinitely.
The stencil units, or the complete stencils, as
the case may be, should be traced carefully onto or-
dinary tracing paper with india ink and a crow quill
pen. We do this in order to make the design show up
better through the less transparent Architect's Linen.
Next, the Architect's Linen should be cut to fit the
stencil pattern with at least an inch border all around.
Now, trace the unit onto the piece of linen with india
ink and carefully cut the stencil.
**********
Note: Often the 1-1/2" striping brushes are too
wide for the finest striping. They can be made nar-
rower by cutting off as many of the hairs as neces-
sary close at the base of the quill.
30.
APPLYING STENCILED DESIGNS ON TINWARE.
When the cutting of the stencil is completed, the pre-
pared piece of tin (see directions for brush stroke
painting) is given a smooth, even coat of varnish, and
allowed to dry until it is practically, but not quite,
dry. It should feel tacky but should let the finger
come away from it perfectly dry. Depending on con-
ditions such as the amount of varnish used, the tem-perature of the room, etc., the length of time until
this point is reached will vary. It might, under favor-
able conditions, be ready for stenciling in half an
hour. Experience will teach one to recognize the
correct time for applying the stencil.
While waiting for the tacky stage to arrive, put
bits of different powders to be used on a piece of
upholsterer's velvet. Tiny amounts are all that will
be needed, and after using the velvet it can be folded
and put away to use another time.
When the crucial moment for stenciling has ar-
rived, place the cut stencil carefully in the correct
position. Wrap a small piece of silk-backed velvet
(never* rayon or cotton) or a piece of chamois over
the forefinger, being careful to keep it smooth.
Hold the stencil in place with the left hand, and,
with the wrapped forefinger, dip very cautiously into
the powder. Wipe off any excess onto your smockand apply the remaining powder to the tacky surface
with a circular motion, shading carefully when the
design so requires. Apply more powder as needed.
It is far better to start with too little powder than too
31.
much, as too much powder will slip under the edge of
the stencil.
After each use stencils should be thoroughly
cleaned with turpentine. Care should be taken not to
let any water come in contact with the Architect's
Linen, as it will be immediately ruined. This is due
to the fact that the starch on the linen is highly sol-
uble in water.
The stenciled article must dry for twenty -four
hours, and then the loose powder should be washed
away under running water.
It may be necessary to touch up with Flat Black
paint here and there where the powder has gotten out
of hand.
OVERTONING STENCILS IN COLOR.
If overtones of color are to be applied, a large brush
is used to lay broad strokes of thin, transparent color
over the different parts of the design.
It is to be noted that in the old stenciled designs,
these broad sweeps of color took in a whole group of
leaves or petals in one stroke, rather than trying to
confine the transparent color to each little leaf or
petal.
STRIPING AND FINISHING STENCILED TIN.
The procedure involved in striping and finishing
stenciled tin is exactly the same as that explained
previously, under directions for brush stroke paint-
ing.
32.
. wmm
Recommended