Decision Support System Example Date: May 15 , 2020

Decision Support System Example

Date: May 15th, 2020

Disclaimer: The views represented in this document only reflect the views of the authors and not the views of Innovation & Networks Executive Agency (INEA) and

the European Commission. INEA and the European Commission are not liable for any use that may be made of the information contained in this document.

Furthermore, the information are provided “as is” and no guarantee or warranty is given that the information fit for any particular purpose. The user of the

information uses it as its sole risk and liability

This project has received funding from the European Union’s Horizon 2020 research and innovation programme

under grant agreement No 770064

Acronyms, definitions and references

The following acronyms are considered:• SO (resp., SOs): Strategic Objective (resp., Strategic Objectives)• TO (resp., TOs): Tactical Objective (resp., Tactical Objectives)• MS (resp., MSs): Measure (resp., Measures)• Score: relevance given by the user to a SO

The list and meaning of SOs, TO, and MS are available the Deliverable 1.5

Scope and Outline

The aim of these slides is to provide an example of the DSS interrogation.Two examples are reported:1. Given a set of Strategic Obectives, find the list of

measures that address them at the best2. Given a set of Measures, find the list of Strategic

Objectives that can be addressed by them and the projects developing them

General overivew of the DSS tool

DSS v1.0 structure

DSS strucure

The DSS is developed in Visual Basic and consits of an Excell workbook articulated in three worksheet:

1. Worksheet Guidelines: this worksheet provides basic intructions

2. Worksheet SO_to_MS: this worksheet provides a list of MSs that addressed a list of SOs choosen by the user

3. Worksheet MS_to_SO: this worksheet provides a list of SOs that can be addressed by a list of MSs choosen by the user

NOTE: The DSS should be opened in only-read mode to avoid errors when saving

Worksheet SO_to_MS

DSS v1.0

Step 1: Select the SOs and the relevant scores

First SO

Second SO

Third SO

Score of the first SO

Score of the second SO

Score of the third SO

NOTE: It is possible to choose a single SO. In this case it must be the first

Step 2: Press MS->SO and get the MS list

MS->SO

List of MSs

NOTE: The different colours indicate the MS’s category. MS are ranked by decreasing relevance.

Step 3: Select a MS and press EXPAND MEASURE

EXPAND MEASURE

Selected MS

List of projects/initiatives that developed the selected MS. The list is ranked by relevance of the project

Step 4: Select a Project and press EXPAND PROJECT

EXPAND PROJECT

Selected project

Selected project details

Selected MS

Worksheet MS_to_SO

DSS v1.0

Step 1: Select the MSs

First MS

Second MS

Third MS

NOTE: It is possible to choose a single MS. In this case it must be the first

Step 2: Press MS->SO and get the SOs and Projects lists

List of MSsMS->SO The different coloursindicate the SO’s category. SO are ranked by decreasing relevance.

This table shows which MS addresses a SO

This table shows which MS is developed in a project

List of projects

Step 3: Select a SO and press EXPAND SO

EXPAND SO

Selected SO

The result is shown in the worksheet SO_to_MS

Step 4: Select a Project and press EXPAND PROJECT

Selected project

Selected project details

EXPAND PROJECT

Unige TeamUniversity of Genoanicola.sacco@unige.ithilda.ghiara@unige.italessio.tei@unige.itweb | www.docksthefuture.eu@ | dauria@circletouch.eu (Project Coordinator)@ | info@docksthefuture.euupdates | www.onthemosway.eu

@DocksTheFuture

Docks The Future

Docks The Future