CUCM 6.0.1 Config Notes (Dave Howe)

Cisco Unified Communications Manager 6.0.1.2000-3Configuration Notes

Authored by:

Dave HoweSenior Support Escalation Engineer Microsoft Corporation - Charlotte NC USA

With technical assistance from:

Geoff ClarkSenior Support EngineerMicrosoft Corporation - Charlotte NC USA

Cisco® Unified Communications is a comprehensive IP communications system of voice, video, data, and mobility products and applications. It enables more effective, more secure, more personal communications that directly affect both sales and profitability. It brings people together by enabling a new way of communicating -where your business moves with you, security is everywhere, and information is always available...whenever and wherever it is needed. Cisco Unified Communications is part of an integrated solution that includes network infrastructure, security, mobility, network management products, lifecycle services, flexible deployment and outsourced management options, end-user and partner financing packages, and third-party communications applications.

Cisco Unified Communications Manager v. 6.0 Product Data Sheet

Introduction / Credits Monday, June 29, 2009

7:44 AM

Cisco Unified Communications Manager Page 1

Terms and Definitions

Partition - provides routing organization for extensions and route patternsCalling Search Space - comprised of route patterns, used to determine target partition when completing a callSIP Trunk Security Profile - template for quickly configuring advanced settings for all associated sip trunksSIP Trunk - used to establish connectivity route to endpoint or gateway for SIP communicationsTranslation Pattern - used for digit manipulation before routing a callRoute Pattern - matches translated dial strings to a route list or gatewayX-Lite Client - free SIP soft phone used for placing/receiving VoIP calls

Hardware Requirements

Cisco Unified Communications Manager will only install on the following server hardware solutions:

HP Server SolutionsIBM Server Solutions

However, you can install Cisco Unified Communications Manager 6.0 in a VMware virtual machine configured with an 80 gigabyte SCSI virtual hard disk.

Please Note

The following documentation illustrates the generalsteps necessary to configure Cisco Unified Communications Manager 6.0.1 for use with either Office Communications Server 2007 R2 or Exchange 2007 Unified Messaging. CUCM This documentation does not contain instructions for configuring OCS 2007 R2 or UM to accept inbound calls from Cisco Unified Communications Manager.

Requirements / Terms and Definitions Sunday, July 05, 2009

10:44 AM

Cisco Unified Communications Manager Page 2

(Select only the Cisco CallManagerservice and click Save)

Step 1 - Activate CUCM Services Monday, June 29, 2009

8:58 AM

Cisco Unified Communications Manager Page 3

Step 2 - Create Partition(s) Monday, June 29, 2009

11:29 AM

Cisco Unified Communications Manager Page 4

Cisco Unified Communications Manager Page 5

(Select the Lake Wylie Partition and move it from Available to Selected. Click Next.)

Step 3 - Create Calling Search Space(s)Monday, June 29, 2009

3:26 PM

Cisco Unified Communications Manager Page 6

Step 4 - Create Trunk Security Profile(s)Sunday, July 05, 2009

7:26 AM

Cisco Unified Communications Manager Page 7

Step 5 - Create SIP Trunk(s) Monday, June 29, 2009

7:44 AM

Cisco Unified Communications Manager Page 8

Cisco Unified Communications Manager Page 9

Create Translation Patterns for Internal Extensions (translates 400X to 803631400X)A.

(Click Save.)

Step 6 - Create Translation Pattern(s) Tuesday, June 30, 2009

10:54 AM

Cisco Unified Communications Manager Page 10

Create Translation Patterns for External Numbers (translates 27XXX to 7045227XXX) B.

Translates dial string 27XXX to 7045227XXX

(Click Save.)

Cisco Unified Communications Manager Page 11

(Click Save.)

Step 7 - Create Route Pattern(s) Monday, June 29, 2009

8:07 AM

Cisco Unified Communications Manager Page 12

Create User AccountsA.

Step 8 - Configure Users / Phones Monday, June 29, 2009

8:58 AM

Cisco Unified Communications Manager Page 13

(Click Save)

Create Phone ObjectsB.

Cisco Unified Communications Manager Page 14

(Click Save.)

Add Line to Phone ObjectC.

Cisco Unified Communications Manager Page 15

(Click Save.)

Cisco Unified Communications Manager Page 16

Associate User to Phone ObjectD.

(Choose User ID)

(Choose Device Association)

(Enable checkmark beside SEP /Device Name, then Save Selected)

Cisco Unified Communications Manager Page 17

Create User Group/Assign UsersE.

(After adding users, click Save.)

Cisco Unified Communications Manager Page 18

Create Default Voice Mail PilotA.

(Open the Default Voice Mail Pilot Number)

(Enter the SA number for the UM Dial Plan. Click Save.)

Step 9 - Configure Voice Mail Tuesday, June 30, 2009

5:19 PM

Cisco Unified Communications Manager Page 19

Verify Phone Associations with System Default ProfileB.

(Select a Phone by clicking on Device Name.)

(Select Line Number.)

(Verify that Voice Mail Profile for each user is set to <None> (system default).

Cisco Unified Communications Manager Page 20

Step 10 - Configure X-Lite Client Monday, June 29, 2009

8:58 AM

Cisco Unified Communications Manager Page 21

Cisco Unified Communications Manager Page 22