View
11
Download
0
Category
Preview:
Citation preview
CONVEYOR BELTPRODUCTS & SERVICES
suppliessuppliesspeedbirdC O N V E Y O R B E L T S
2
‘‘ ‘‘Service, safety and reliability, 24 hours a day, 7 days a week.
Established since 2013, Speedbird Supplies Ltd is an independent family owned company
and has become one of the leading suppliers of Rubber Conveyor Belting and Service
Materials in the United Kingdom.
Our Sales and Technical team have combined experience in excess of 100 years and
possessing a wealth of knowledge across all aspects of bulk conveying and material handling.
Not only do we supply our market leading CORRUFLEX™ Sidewall Conveyor Belts, we also
supply a wide range of Flat, Chevron, Profiled, Dry Back Belting and other Specialised Belting,
many available from stock.
To support this we also can supply a wide range of service and ancillary products,
including Skirting, Scrapers, Fasteners, Adhesives and Repair Materials.
Our site services division, Eastern Vulcanising Services offers a full range of site services,
including supply and installation of conveyor belts, repairs, roller and scraper installation
and full site surveys.
Whatever your needs, we strive to deliver the Right Product in The Right Quality
at the Right Time.
3
INTRODUCTION
suppliessuppliesspeedbirdC O N V E Y O R B E L T S
‘‘ ‘‘
The right product in the right quality at the right time
4
TEXTILE EP FLAT BELTINGSpeedbird Supplies Ltd are able to offer most specifications of EP flat belt in widths
from 300mm to 2000mm, many available from stock.
All of our Standard Grade Conveyor Belting is DIN Y and conforms to DIN 22102.
The EP Fabric (Polyester/Polyamide) reduces the stretch under tension to a minimum.
Special Qualities
We are also able to supply special quality conveyor belts, some from stock or at very
short notice.
These include Oil Resistant, Heat Resistant and Fire Resistant. If these aren't available
from stock, we are able to have them manufactured to your requirement. (Where a
minimum order quantity may apply for certain belt types).
EP Belting Key Features
• Low Stretch under tension
• Excellent Troughing Characteristics
• Covers with excellent Abrasion Resistance
• EP Fabric resistant to rot
• Good Tear Resistance.
Min DrivePulley
Diameter (mm)
Min Tail Pulley
Diameter (mm)
Tensile Strength (N/mm)
Weight kg/m2
Thickness (mm)
Bottom Cover (mm)
Top Cover (mm)
Specification
EP160/2 2:1
EP200/2 2:1
EP250/2 3:1
EP315/2 3:1
EP315/3 3:1.5
EP400/3 4:2
EP500/3 5:1.5
EP630/4 6:2
EP800/5 6:2
2mm
2mm
3mm
3mm
3mm
4mm
5mm
6mm
6mm
1mm
1mm
1mm
1mm
1.5mm
2mm
1.5mm
2mm
2mm
5.5mm
5.5mm
6.5mm
6.5mm
8mm
9.5mm
10mm
13.5mm
14.3mm
6.2
6.2
7.4
7.5
8.6
11.5
12
16.5
18
250mm
250mm
315mm
315mm
315mm
400mm
400mm
500mm
500mm
200mm
200mm
250mm
250mm
315mm
315mm
315mm
400mm
400mm
160mm
200mm
250mm
315mm
315mm
400mm
500mm
630mm
800mm
5
suppliessuppliesspeedbirdC O N V E Y O R B E L T S
DRY BACK (GLIDE BELT)Dry Back or Glide Belt is used where the conveyor belt is required to run on a flat steel bed.
The belt has no bottom cover and utilises a low friction fabric on the underside.
This is available from stock as EP250/2 2:0
and EP400/3 2:0 in widths from 300mm to
2000mm. Other specifications are available
on request and may be subject to a minimum
order quantity.
Cover grades available are Standard DIN Y
and Oil Resistant.
GRIP FACE (ROUGH TOP)Grip face or Rough Top belt is used where boxed or bagged items need to be conveyed
on an incline. These offer excellent grip for packed items in any conditions.
This is available in Standard Type Belting with
a bottom cover and and dry back with no
bottom cover where the conveyor employs a
slide bed.
The standard ratings are EP250/2 2:1 or
EP400/3 3:1 for standard types, and EP250/2
2:0 and EP400/3 3:0 for Dry Back types,
Widths from 300mm to 2000mm
Other ply ratings and rubber types are available, please contact our sales department
for details. Minimum order quantities may apply.
6
CHEVRON BELTINGSpeedbird Supplies Ltd can supply a wide range of Chevron Conveyor Belting in widths
from 400mm to 1600mm and chevron heights from 15mm to 32mm.
Belts can be supplied in Black Standard or in special qualities on request (minimum order
quantities may apply).
Cleat Pitch (P)
Clea Width (Cw)
Belt Width (Bw)
Tension Ratings
ChevronDesign
ChevronType
V6 Multi
C15P287
C15P385
C25P450
C15P436
C15P585
EP250/2 3:1 EP400/3 3:1
EP250/2 3:1 EP400/3 3:1
EP250/2 3:1 EP400/3 3:1
EP400/3 3:1 EPS00/3 5:1.5
300-2000mm = Belt Width 75mm
400-500mm 287mm 145mm
500-800mm 436mm 218mm
650-800mm 585mm 295mm
400-800mm 385mm 254mm
500-800mm 450mm 312.5mm
7
suppliessuppliesspeedbirdC O N V E Y O R B E L T S
CHEVRON BELTING
Cleat Pitch (P)
Clea Width (Cw)
Belt Width (Bw)
Tension Ratings
ChevronDesign
ChevronType
C25P750
Y32P680
Y32P880
Y32P450
EP400/3 3:1 EP500/3 5:1.5
EP400/3 3:1 EP500/3 5:1.5
EP400/3 3:1 EP500/3 5:1.5
EP400/3 3:1 EP500/3 5:1.5
800-1200mm 750mm 451mm
500-800mm 450mm 330mm
700-800mm 680mm 330mm
900-1600mm 880mm 300mm
Other Chevron types and belt widths are available on request, please call for details.
Minimum order quantities may apply.
8
SERVICE MATERIALSIntroducing CORRUBOND and CORRUPRIME, our own adhesive and metal primer that has
been developed in conjunction with a leading European adhesive manufacturer to meet the
stringent demands of the Conveyor Belt Industry. This has been exhaustively tested in house
and with the manufacturer and is proven to offer extremely high adhesion strengths.
Repair Strips and Diamond Patches
Available with or without fabric reinforcement and can be supplied in a variety of sizes.
Call our sales team for more details.
9
suppliessuppliesspeedbirdC O N V E Y O R B E L T S
RUBBER SHEET AND LAGGINGDiamond Lagging
Our Diamond Drum Lagging is available in both Mini and Maxi Sizes. Mini with 35 x 19mm
diamonds and Maxi with 46 x 26mm diamonds, all with Bonding Layer Roll size is
2000mm x 10m and thickness from 8mm to 15mm for Mini Diamond and 10mm to 20mm
for Maxi Diamond.
Ceramic Lagging
Ceramic Lagging is available, some specifications from stock. Thicknesses of 12mm, 13mm,
15mm and 20mm available.
Rubber Hardness is 65ShA, and the Ceramic tiles are 92% Aluminium Oxide, giving excellent
wear resistance and grip in extreme operating conditions.
All come with bonding layer.
10
RUBBER SHEET AND LAGGING SANDWICH SCRAPER RUBBER
A premium quality sandwich scraper rubber
for V Scrapers, available in thicknesses of
15mm, 20mm and 25mm.
Precut rolls of 15mm and 20mm available
in widths of 100mm, 150mm, 200m and
250mm. Rolls are 10m long.
Outer black rubber - 60° ShA Hardness
Inner red rubber - 40° ShA Hardness
SIDE SKIRT
Premium Quality black side skirting in high
quality 60° ShA rubber.
Available in various thicknesses from 6mm to
20mm. Roll sizes from 1400mm to 2000mm
wide and 10m long.
10mm thick skirting is available as pre-cut rolls
that are ready to install. Widths of 100mm,
150mm, 200mm and 250mm.
LINING MATERIAL
Premium quality lining material, available
with or without bonding layer.
Thicknesses of up to 50mm available,
roll size 1400mm x 10m
Hardnesses of 40°, 60° and 70° ShA
and various colours.
11
suppliessuppliesspeedbirdC O N V E Y O R B E L T S
FLEXCOSpeedbird Supplies Ltd are approved distributors of the full Range of Flexco Fasteners and
Conveyor Belt Ancillary products.
The full range of Flexco hinged staple fasteners are available
from Speedbird Supplies Ltd.
RS62 - Belt Thicknesses from 1.5mm to 3.2mm
RS12S - Belt Thicknesses from 3.2mm to 4.8mm
RS187 - Belt Thicknesses from 4.8mm to 6.4mm
Available in Standard Carbon Steel and Also Stainless Steel,
for belt widths from 300mm to l500mm.
Rivet Hinge for heavier duty applications, all sizes available,
some may be special order.
R2 - Belt Thicknesses of 4mm to 9mm
RS - Belt Thicknesses of 6mm to 11mm
RS 1/2 - Belt Thicknesses of 8mm to 15mm
For thicker belts, R6, RAR6, RAR8 and R (available to order).
Available in Carbon or Stainless Steel.
Flexco Plate Fasteners in all sizes and types are available,
some from stock.
Types 1, 140, 190, 1 1/2, 2, 2 1/4, 2 1/2 and 3 in varying pack sizes.
Type “E” and “C” - Standard Steel
Type “EE” - Everdur, non magnetic copper alloy
Type “ES” - Stainless Steel
Type “VP” - Vulcanised Plate (rubber covered)
Type “EMA” - Megalloy.
Other types of Flexco fasteners and all installation tools are available from
Speedbird Supplies Ltd. Call our sales team for details.
12
FLEXCOThe full range of Flexco Conveyor ancillaries are available from Speedbird Supplies Ltd.
This includes Primary and Secondary Cleaners, Skirt Clamping Systems and Tracking Sets.
Belt Cleaning Systems
The full range of Flexco Belt Cleaning Systems
are available, including primary and secondary
scrapers, pre-cleaners, powered brush cleaners.
Scrapers are available as standard or limited
space types, and can be in many different grades
including heat resistant and tungsten tipped.
Skirt Clamp System
Flexco Skirt Clamp Systems are an effective
way of securing side skirts to the conveyor.
They also allow for fast and efficient
replacement of skirt rubbers.
Flexco Belt Trackers
An effective way to ensure that you conveyor
belt runs true and straight, helping to prolong
the life of you belt. The PT Max Trainer has a
true pivot and tilt system making it the only
high performance belt trainer of it's type on
the market.
Other Flexco ancillary items are available including Impact Bars and Beds, Belt Ploughs, Idlers,
Rollers and Inspection Doors. Contact our sales team for further information.
13
suppliessuppliesspeedbirdC O N V E Y O R B E L T S
LUWIREP REPAIR SYSTEMSpeedbird Supplies Ltd are the exclusive distributor for the LUWIREP repair system from
Lutze Fordertechnik GmbH.
LUWIREP is a two part self mixing repair liquid that is touch dry in just 45 seconds.
In only 40 minutes, the repair can be buffed and the conveyor belt returned to service.
An excellent solution where down time on a conveyor must be kept to a minimum.
Two type are available, LUWIREP 70, suitable for Rubber Repairs with a Shore Hardness
of 70 and LUWIREP 85 for harder PU type repairs with a Shore Harness of 85.
Pack sizes are 50ml, 400ml and 1400ml. All sizes and application tools are available from
Speedbird Supplies Ltd.
14
CORRUFLEX SIDEWALL AND CLEATED BELTSCORRUFLEX™ Sidewall and Cleated belting can be supplied to suit almost any application.
Sidewall heights are from 40mm to 400mm and cleat heights from 40mm to 360mm.
Base belts can be either EP or XR Cross Stabilised, and are available in many rubber qualities.
We can also supply loose profiles. Our CORRUFLEX™ brochure is available from our website.
VULCANISING PRESSESVulcanising presses of both Sectional and Frame types can be supplied along with accessories
such as cooling systems and compressors.
Made in Europe to your specification with both Quality and Safety in mind. Please call our
sales team for details.
15
suppliessuppliesspeedbirdC O N V E Y O R B E L T S
SITE SERVICESEastern Vulcanising Services Ltd can offer full on-site services, including a 24hour,
7 days a week breakdown service.
Our service fleet are fully equipped to carry out all aspects of Conveyor Belt Installation
and Service work.
Our personnel are trained to the highest standard and are up to date with all of the latest
health & safety legislation.
Other on-site services are available, please call the Eastern Vulcanising team on
+44 (0)1379 897156 to discuss your needs.
• Conveyor Belt Installation
• Hot or Cold Vulcanised Joints
• Mechanical Fastener Joints
• Drum Lagging
• Chute Lining
• Repair Work
• Belt Tracking
• Troubleshooting
• Site Surveys
suppliessuppliesspeedbirdC O N V E Y O R B E LT S
For more information, please contact us on:T: +44 1359 232667 F: +44 1359 300200 E: sales@speedbird-supplies.co.uk
www.speedbird-supplies.co.uk
Speedbird Supplies, Unit 28, Howlett Way, Thetford, Norfolk, IP24 1HZ, UK.
Recommended