View
223
Download
8
Category
Preview:
Citation preview
World Congress on Engineering
WCE 2010
30 June - 2 July, 2010
Imperial College London, London, U.K.
Organizing Association:
IAENG
International Association of Engineers
IA ENG
International Association of EngineersISBN: 978-988-18210-8-9
ISSN: 2078-0958
VOLUME III
The 2010 International Conference of Applied and
Engineering Mathematics
Properties of Modified p-Cyclic Self-Maps in Metric Spaces
M. De la Sen 1666
A Method for Testing AQM Controllers with Probability Guaranteed
Properties
Jose M. Maestre, Teresa Alvarez, Anuar Salim, and Teodoro Alamo....
1679
Line Segment Convolution
Jeffrey A. Dunne, and Kevin M. Ligozio 1686
Optimal Replenishment Policy for Special Display Goods with Ramp-type
Demand Rate
Hidefumi Kawakatsu 1691
On Waiting Time Distributions for the Occurrence of Patterns
Spiros D. Dafnis, and Andreas N. Philippou 1697
Control and Integrability on SO (3)
C. C. Remsing. 1705
A Direct BEM with Higher Order Boundary Elements for the Compressible
Fluid Flow around Smooth Obstacles
Ion Vladimirescu, and Luminita Grecu 1711
An Evolutionary Solution to a Multi-objective Scheduling Problem
Sumeyye Samur, and Serol Bulkan 1717
Using Interval Graphs in an Order Processing Optimization Problem
Isabel Cristina Lopes, and J. M. Valerio de Carvalho 1722
Direct-Search Penalty/Barrier Methods
Aldina Correia, Joao Matlas, Pedro Mestre, and Carlos Serodio 1729
Joint Accelerated Failure Mode Modeling of Degradation and Traumatic
xxxv
Failure Times
Zhengqiang Pan, Jinglun Zhou, and Peng Zhao 1735
The Research of Hydromechanics Methods with Changing Connectivity of
the Mesh in Problems with Large Deformations
VANG Rui-li, LIN Zhong, and LIN Wen-zhou 1739
2D LARED-H Simulation of Ignition Hohlraum
ZHAI Chuan-lei, PEL Wen-bing, and ZENG Qing-hong. 1745
Curved Beams with Elastic Supports Transfer and Stiffness Matrices
Lazaro Gimena, Pedro Gonzaga, FaustIno N. Gimena, and Fernando
Sarria
Force Characteristics of an Engaged Involute Gear Tooth
Nesrin Akman 1755
Presentation of an Efficient Parallelepiped Finite Element Based on
the Strain Approach SBP8C
D. HAMADI, and T. MAALEM. 1761
A Geom/G/l/n Queueing System with LIFO Discipline, Service
Interruptions and Resumption, and Restrictions on the Total Volume of
Demands
Annunziata Cascone, Rosanna Manzo, Alexander V. Pechinkin, and Sergey
Ya. Shorgin
Explicit Group Iterative Methods for the Solution of Telegraph
Equations
Kew Lee Ming, and Norhashidah Hj. M. Ali 1770
Optimization of Statistical Decisions via an Invariant Embedding
Technique
Nicholas A. Nechval, Maris Purgailis, Kaspars Cikste, Gundars Berzins,^
and Konstantin N. Nechval
Bivariate Degradation Modeling Based on Gamma Process
Jinglun Zhou, Zhengqiang Pan, and Quan Sun 1783
Dispersal Curves for Optimal Collision Avoidance in a Close ProximityEncounter: a Case of Participants with Unequal Turn Rates
xxxvi
Tanya Tarnopolskaya, and Neale L. Fulton 1789
Neural Network Modeling and Simulation of Sorption of Cd (II) Ions
from Waste Water using Agricultural Waste
J. K. Arora, and Shallni Srivastava 1795
Explicit Group Methods in the Solution of the 2-D Convection-Diffusion
Equations
Tan Kah Bee, Norhashidah llj. M. AH, and Choi-Hong Lai 1799
Biharmonic Computation of the Flow Past an Impulsively Started
Circular Cylinder at Re = 200
Jiten C Kalita, and Shuvam Sen 1805
Mine Valuation in the Presence of a Stochastic Ore-Grade Uncertainty
G.W. Evatt, P.V. Johnson, P. V. Duck, and S. R Howell 1811
On the Reliability of Consecutive Systems
Spiros D. Dafnis, Frosso S. Makri, and Zaharias M. Psillakis 1817
Multidimensional Matrix Mathematics: Notation, Representation, and
Simplification, Part 1 of 6
Ashu M. G, Solo 1824
Multidimensional Matrix Mathematics: Multidimensional Matrix Equality,
Addition, Subtraction, and Multiplication, Part 2 of 6
Ashu M. G. Solo 1829
Multidimensional Matrix Mathematics: Multidimensional Null and
Identity Matrices and Multidimensional Matrix Outer and Inner
Products, Part 3 of 6
Ashu M. G. Solo 1834
Multidimensional Matrix Mathematics: Multidimensional Matrix
Transpose, Symmetry, Antisymmetry, Determinant, and Inverse, Part 4 of
6
Ashu M. G. Solo 1838
Multidimensional Matrix Mathematics: Algebraic Laws, Part 5 of 6
Ashu M. G. Solo 1842
xxxvii
Multidimensional Matrix Mathematics: Solving Systems of Linear
Equations and Multidimensional Matrix Calculus, Part 6 of 6
Ashu M. G. Solo 1848
Asymptotic Expansion for Thermal Flow through a Pipe
Sanja Marusic, Eduard Marusic-Paloka, and Igor Pazanin 1851
Selection of Multiphase Governmental Projects, Related Contractors and
Master Planning under Fuzzy Environment
Hossein Badri, Taha Hossein Hejazi, and Babak Afghahi 1855
Analytical Treatment of System of Linear and Nonlinear PDEs by
Homotopy-Perturbation Method
M. S. H. Chowdhury, I. Hashim, and A. F. Ismail 1860
Numerical Investigation on Heat Transfer of Power Law Fluids in a Pipe
with Constant Wall Temperature
Botong Li, Liancun Zheng, and Xinxin Zhang. 1864
Fixed Points Results via Iterates of Four Maps in TVS-valued Cone
Metric Spaces
Muhammad Arshad, and Akbar Azam. 1867
The Stochastic Boundary-Layer in the Non-Newtonian Problem
Lei Hou, Hanling Li, Dezhi Lin, and Lin Qiu 1872
Probabilistic Analysis of a Desalination Unit with Nine Failure
Categories
S M Rizwan, N Padmavathi, G Taneja, A G Mathew, and All Mohammed Al~
Balushi
Eigenvalue Approach to Thermoelastic Interactions in an Unbounded Bodywith a Spherical Cavity
A. Lahiri, B. Das, and S. Sarkar. 1881
On Solving Unsymmetric Tridiagonal Systems Without Interchanges
Jennifer B. Erway, Roummel F. Marcia, and Joseph A. Tyson 1887
Flow and Heat Transfer In a Power-law Fluid with Variable Conductivity
over a Stretching Sheet
xxxviii
Jing zhu, Liancun Zheng, and Xinxin Zhang. 1893
Optimal Fuzzy Control with Application to Discounted Cost Production
Inventory Planning Problem
Md. Azizul Baten, and Anton Abdulbasah Kamil 1898
A Note on Chromaticity of Certain 6-Partite Graphs
A. Sh. Ameen, Y H. Peng, and H. Roslan 1903
Development of a New Optimal Method for Solution of Transportation
Problems
Chandrasekhar Putcha, Aditya K. Putcha, Rohul Amin Bhuiyan, and Nasima
Farzana Hoque
Formulation of Response Reduction Factor for RCC Framed Staging of
Elevated Water Tank using Static Pushover Analysis
Bhavin Patel, and Dhara Shah 1913
Controlling Chaotic Forced Brusselator Chemical Reaction
Ali Sanayei 1917
Stability of a Numerical Discretisation Scheme for the SIS Epidemic
Model with a Delay
Ekkachai Kunnawuttipreechachan 1923
A Fixed Point Approach to Ulam Stability Problem for Cubic and Quartic
Mappings in Non-Archimedean Fuzzy Normed Spaces
Renu Chugh, and Sushma 1931
An Instance of Failure for the MATLAB Explicit 0DE45 Solver
Riccardo Fazio 1935
Finite Element Modeling for the Design of a Single-Screw Extruder for
Starch-Based Snack Products
Ram Yamsaengsung, and Chumporn Noomuang. 1941
Subdivision Algorithm For The Triangular Spline Surface
Mohd. Nain Hj. Awang, and Emi Marlina Mohd. Nain 1945
Spectral Methods for Time-dependent Variable-coefficient PDE Based on
Block Gaussian Quadrature
xxxix
James V. Lambers 1949
A New Approach to the Divergence of a Tensor and Application to the
Curvature Tensor in the General Theory of Relativity
Andrei Nicolaide 1955
Web-based Application Programming Interface to Solve Nonlinear
Optimization Problems
Joao Matias, Aldina Correia, Pedro Mestre, Carlos Fraga, and Carlos
Serodio
An Iteration Process For Two Finite Families Of Mappings
Safeer Hussain Khan, Isa Yildirim, and Mujahid Abbas 1967
Some Oscillation Flows of a Generalized Oldroyd-B Fluid in Uniform
Magnetic Field
Yaqing Liu, Liancun Zheng, Xinxin Zhang, and Fenglei Zong. 1971
Extended Progress Variable and Mixture Fraction Model for Turbulent
Premixed Combustion
Y. Y. Wu, and C. K. Chan 1975
The 2010 International Conference of Computational
Statistics and Data Engineering
Improving the Performance of Cascade Correlation Neural Networks on
Multimodal Functions
Mike J. W. Riley, Chris P. Thompson, and Karl W, Jenkins 1980
PLS Path Modeling with Mode C Computational Experiments
Alba Martinez-Ruiz, and Tomas Aluja~Ba.net 1987
Improvements of Rainfall Rate Measured by Radar for Tripoli City -
Libya
Kamil S. AH, and Medhat H. Said. 1993
Multivariate Functional Regression for Classification With an
Application to Geology
xl
Vera Hofer. 1997
Assessment of Entropy Based Method of Variable Choice in Cluster
Analysis
Jerzy Korzeniewski 2003
Assessing the Number of Clusters From a Mixture of Von Mises-Fisher
Wafia Parr Bouberima, Mohamed Nadif, and Yamina Khemal Bencheikh... 2006
Generalized Measure for Two Utility Distributions
J. S. BHULLAR, 0. P. VINOCHA, and MANISH GUPTA 2012
Automation and Control Engineering Laboratory: Students Perspectives
Celina P. Leao, Filomena 0. Soares, Vitor Carvalho, and Rosa M.^
Vasconcelos
A Method For Fitting A pRARMAX Model: An Application To Financial Data
Marta Ferreira, and Luisa Canto e Castro 2022
The 2010 International Conference of Manufacturing
Engineering and Engineering Management
On Sensitivity of EWMA Control Chart for Monitoring Process
Dispersion
Saddam Akber Abbasi 2027
Game-Theoretic Coordination of Marketing and Inventory Policies in a
Multi-level Supply Chain
YUN HUANG, and GEORGE Q. HUANG. 2033
Simulation Study of Optimal Pricing on Daily Perishable Products with
Reference Price Effect
Takeshi Koide, and Hiroaki Sandoh 2039
Comparison of Dry and Flood Turning in Terms of Quality of Turned
Parts
N. H. Rafai, and M. N. Islam. 2044
xli
Intelligent Scenario Selection in Dynamic Hoist Scheduling Problem:
The Real-Life Electroplating Production Line Case Analysis
K. Kujawski, and J. Swiatek 2050
Effect of Activated Sludge on Limestone Reactivity
Paul Maina, and Makame Mbarawa 2057
Analyzing of CPFR Supporting Factors in Retail Sector
G. Buyukozkan, and Z. Vardaloglu 2064
Study on Dry Electrical Discharge Machining
Grzegorz Skrabalak, and Jerzy Kozak 2070
Business Performance Evaluation Model for the Taiwan Electronic
Industry based on Factor Analysis and AHP Method
V. Wen 2076
The Relationship of Head Rotation Angle and SCM EMG Value for the
Development of AnS2
C. F. Tan, W. Chen, and G. W. M. Rauterberg. 2082
GA-Driven ANN Model for Worker Assignment into Virtual Manufacturing
Cells
R. V. Murali, A. B. Puri, and G. Prabhakaran 2086
Optimal Parameter Design by Regression Technique and Grey Relational
Analysis
A. Al-Refaie, L, Al-Durgham, and N. Bata 2091
Optimization for Efficient Supply Chain Using Swarm Intelligence: an
Outsourcing Perspective
N C Hiremath, Sadananda Sahu, and M K Tiwari 2096
The Development of Quality Management Model for Implementation in
Thai Organisations
P. Kluaypa, and S. 0. Onuh 2102
Funding Structurization Based on Level of Importance in Formulating
Indonesia National Standard
Arfan Bakhtiar, Ari Arvianto, and Ike Permata Sari 2105
xlii
Effect of High Speed Cutting Parameters on the Surface
Characteristics of Superalloy Inconel 718
D. G. Thakur, B. Ramamoorthy, and L. Vijayaraghavan 2108
Exploiting Simulation for Call Centre Optimization
Salman Akhtar, and Muhammad Latif. 2112
A Simulation-Based Decision Making Tool for Key Warehouse Resources
Selections
Safwan A. Altarazi, and Maysa M. Amouri 2118
Reactive Operating Schedule in Case of a Disaster: Arrival of
Unexpected Victims
/. Nouaouri, J-C. Nicolas, and D. Jolly. 2123
A Buffer Stocks Model for Stabilizing Price of Staple Food with
Considering the Expectation of Non Speculative Wholesaler
Wahyudi Sutopo, Senator Nur Bahagia, Andi Cakravastia, and TMA. Ari2\2§
Samadhi
Integration of Quality Cost to Economic Service Life
Jirarat Teeravaraprug. 2135
Discount Pricing Model to Coordinate a Supply Chain under Stochastic
Demand Environment
S. P. Sarmah, and San tami Sinha 2139
Tailoring Material Properties in Layered Manufacturing
Prashant K. Jain, Pulak M. Pandey, and P. V. M. Rao 2144
Workflow Analysis as Tool for Development of Medical Devices, a white
Paper
A. Boese, and K. -//. Grote 2149
An Optimization Technique for the Full and Efficient Removal of
Copper from Wastewater
Bahatope. A. Olufemi, Ibrahim. 0. Salami, and Adewale. S.
Akinyanju 2153
xliii
The Estimation of Forging Load for the Closed Die Forging Process by
Computer Simulation
D. B, Gohil 2160
Level of Repair Analysis based on Genetic Algorithm with Tabu Search
Taoufik BOUACHBRA, Mohammed KISHK, and Laurie POWER. 2166
Matching Teams to Process Oriented Roles
Usman Ghani, Richard Weston, and Robert Harrison 2173
Inventory Control for Stochastic Reverse Logistics with Product's
Life Cycle
Che~Fu Hsueh 2179
Relationship between Flank wear and Cutting Force on the Machining of
Hard Martensitic Stainless Steel by Super Hard Tools
S. Thamizhmanii, and S. Hasan 2185
Metal Cutting Optimization Using Graphical Method
Dolatrai B. Naik, Devdas I. Lalwani, Faculty, SVNIT Surat, Gujarat,2\§l
and India
Robustness-based Comparison of Reorder Point and Kanban Replenishment
Strategies
Chandandeep S. Grewal, SiIvanus T. Enns, and Paul Rogers 2195
The Analysis and Complementarity of Abbe Principle ApplicationLimited in Coordinate Measurement
Fei Yetai, Shang Ping, Chen Xiaohuai, Huang Qiangxian, and Yu
Liandong. 2201
Analysis of the Acceptable Deviation for the Measurement Process
Established by the MSA and the VDA Manuals
Sueli Fischer Beckert, Edson Pacheco Paladini, and Luiz Veriano
Oliveira Dalla Valentina
Influence of Process Parameters in the Direct Metal Deposition of H13
Tool Steel on Copper Alloy Substrate
M. Khalid Imran, S. H. Masood, and Milan Brandt 2213
xliv
Surface Roughness Prediction for CNC Milling Process using Artificial
Neural Network
M.F.F. Ab. RashId, and M. R. Abdul Lani 2219
The 8D Methodology: An Effective Way to Reduce Recurrence of Customer
Complaints?
Carlos A. Riesenberger, and Sergio D. Sousa 2225
Lead Time Estimation of A Production System using Fuzzy Logic
Approach for Various Batch Sizes
A. Sudiarso, and R. A. Putranto 2231
Toward Understanding Costs and Benefits of Virtual Teams in Virtual
Worlds
Adji Cisse, and David A. Wyrick 2234
Effects of Lightning Rod on a Substation after a Lightning Stroke
M. Derakhshanfar, and M. Javdani E. 2240
Comparative Study of Robust Controllers for Vibration Control of
Flexible Structures by Combining Pre-Compressed Layer Damping and
ACLD Treatment
Rajiv Kumar, and Sanjiv Kumar. 2246
Optimization Measures for Assessing Compromise Solutions in
Multiresponse Problems
Nuno Costa, Zulema Lopes Pereira, and Martin Tanco 2252
The Cost Forecasting Application in an Enterprise with Artificial
Neural Networks
Tulay KORKUSUZ POLAT, and Seher ARSLANKAYA 2258
Conflict between Chainsaw Rigid and Vibration Acceleration based on
Conversion Bridge
Yan-wei Zhao, Huan-huan Hong, Jian Chen, and Nan Su 2263
Effect Of Calcination Temperature On The Morphology Of Plating Sludge
N. Tugrul, 0. Dere Ozdemir, and S. Piskin 2269
Short-run Process Control Based on Non-conformity Degree
xlv
Majid Aminnayeri, Elnaz Asghari Torkamani, Mehdi Davodi, and Faraz
Ramtin
The Determination of the Boron Amounts of Teas That Are Sold In
Turkey by Using the ICP-OES Technique
E. Moroydor Derun, A. S. Kipcak, and 0. Dere Ozdemir. 2277
Applying Harmony Search to the Bulky Waste Recycling Network Design
Problem
UeiShiang Chang, and Wei-Chih Yang. 2280
Optimization of a Dynamic Supply Chain Model with Budget Constraint
Hossein Badri, and Babak Afghani 2286
Simulation of a Libyan Cement Factory
Elbahlul M. Alghadafi, and Muhammad Latif. 2292
Analysis of the Sustainable Supply Chain Structure with IncompletePreferences
G. Buyukozkan, and G. cifci 2297
Modelling Demand and Supply of Cocoa Produce in Nigeria using
Regression Method
B. Kareem, 0.0. Awopetu, P. K. Oke, B. 0. Akinnuli, S. P. Ayodeji, and
P. B. Mogaji
A Push-Pull Manufacturing Strategy: Analytical Model in the Screw
Cutting Sector
B. Lyonnet, M. Pralus, and M. Pillet 2306
Validation of an Ontology-based Approach for Enhancing Human
Simulation in General Assembly Environments
Seonhwa Jeong, Diana M. Wegner, and Sangdo Noh 2313
A Location Within Distribution Network Design Problem With Flexible
Demand
Reza Tavakoli-Moghadam, Faraz Ramtin, Vahidreza Golmohanmadi, and^Elnaz Asghari Torkamani
Material Selection Method in Design of Automotive Brake Disc
M. A. Maleque, S. Dyuti, and M. M. Rahman 2322
xlvi
The Effect of Testing a Copper Wire and a Copper Wire Coated with
SnPb Solder using a Wetting Balance Machine
Bobby Woods, and Christy Gil lick. 2327
Boiling Heat Transfer on the Outside of A Miniature Diameter Compact
Tube Bundle
Ebenezer Adorn, Sheikh Z Islam, and Peter Kew. 2331
A Comparison of Ulexite Mineral and Borax Decahydrate to Synthesize
Zinc Borate
M. B. Piskin, and N. Baran Acarali 2337
Coordinated Control of Waste Water Treatment Process
Magdi S. Mahmoud. 2341
Lean Revolution and the Human Resource Aspects
Ifechukwude K. Dibia, and Spencer Onuh 2347
Theoretical Prediction of the Springback of Sheet Metal Laminates
after U-Bending
H. Adibi, M. H. Asadian Ardakani, B. Mollaei Dariani, and F. R.oori
„. , .
2351BigJ an
A Survey of TQM Practices in North Karnataka Manufacturing SMEs: an
Empirical Evaluation
S B Uallur, and N L Hiregoudar. 2357
Exploiting Simulation for Product Returns in SMEs
Muhammad Ejaz Ahmed, and Muhammad Latif. 2363
Communication in Technical Organizations: A Designed Experiment
Approach
Ganapathy S. Natarajan, David A. Wyrick, and Richard R. Lindeke....
2369
Applying a Two-Stage Simulated Annealing Algorithm for Shelf Space
Allocation Problems
Chieh-Yuan Tsai, and Ming-Chang Wu. 2376
A Nonparametric Analysis of Asymptomatic Hazard Rates in a Brewing
Plant Using the Probability Failure Functions
xlvii
J. I. Achebo, and 0. Oghoore 2381
Multiple Cluster Tools System Modelling Using Coloured Petri Net
Tauseef Aized. 2385
Deformation Evaluation of Embedded Antennas in Vehicular Components
E Sulic, B. Pell, S, John, R. Gupta, W. Rowe K. Ghorbani, and K.
Zhang.
Web Services - Based Control Devices for Future Generation
Distributed Automation Systems
Navjot Kaur, Robert Harrison, Andrew West, and Punnuluk
Phai thoonbua thong. 2395
Performance Analysis of a Two Stage Supply Chain Network Using
Simulation - A Case Study
Ramaa.A, T.M. Rangaswamy, and K. N. Subramanya 2401
Machining Optimization of Sleeve and Valves of Hydraulic Steering
System
Silva S. P., Pereira R. F. P., Abreu G. A., Panzera T. H., and Brandao
L. C.2407
2413
An Assessment of Machine Tools Utilisation Effectiveness in the
Developing Economy
B. Kareem, 0.0. Awopetu, P. K. Oke, B. 0. Akinnuli, S. P. Ayodeji, and
P. B. Mogaji
Multi Objective Particle Swarm Optimization for A Dynamic Cell
Formation Problem
Fatemeh Sarayloo, and Reza Tavakkoli-Moghaddam. 2418
Cetane Number and Thermal Properties of Croton Oil, Biodiesel, 1-
Butanol, and Diesel Blends
F. Lujaji, A. Bereczky, Cs. Novak, and M. Mbarawa 2424
Capturing the Process Efficiency and Congestion of Supply Chains
Mithun J. Sharma, and Yu Song Jin 2429
The Problem of Scheduling in Parallel Machines: A Case Study
xlviii
F. Charrua Santos, and Pedro M. Vilarinho 2443
Comparative Study of Low and High-Grade Crumb Rubber Processing
Energy
T. P. Utomo, U. Hasanudin, and B. Suroso 2449
Corrosion and Wear Behavior of ZrN Thin Films
J. Menghani, K. B. Pai, M. K. Totlani, and N. Jalgoankar. 2454
Improvement of Scrap Request Process with Six Sigma Methodology
J. B. Ferreira, and I. S. Lopes 2458
Minimizing Makespan for Machine Scheduling and Worker AssignmentProblem in Identical Parallel Machine Models Using GA
Imran AH Chaudhry, Sultan Mahmood, and Riaz Ahmad. 2464
Planning Inspections of Fatigued Aircraft Structures via Damage
Tolerance Approach
Nicholas A. Nechval, Maris Purgailis, /Caspars Cikste, and Konstantin^
N. Nechval
An Investigation into Dimensional Accuracy Achievable in Wire-cut
Electrical Discharge Machining
M. N. Islam, N. H. Rafai, and S. S. Subramanian 2476
Game-theoretic Price Coordination in a Three-level Supply Chain with
Different Channel Structures
Yun Huang, and George Q. Huang. 2482
Appendix
Author Index
xlix
Recommended