View
217
Download
2
Category
Preview:
DESCRIPTION
cinta led
Citation preview
Non-waterproof Flex Strip 3528 Series
PLCC-2 SMD LED as the light source
High Brightness, All single color
High luminance efficient and low power consumption
Long Life over 80, 000 hours of usable life
Easy Installation, 3M Self adhesive back side
The flexible LED strip can be divided by every three LEDs!
2 years limited warranty
HK-F8N-30 Series
5000mmX8mm SMD Light Ribbon (300-LED).
Printed Circuit Board Thickness: 0.2mm
Working Voltage: 12V DC.
Working Current: 2000mA (400mA per meter).
LED Angel: 120°
Package: 5 meters / reel
Matched Joint connector for easy installation after cutting
HK-F8N-60 Series
Drawing ------------------------------------------------------F8N-30------------------------------------------------------------------
------------------------------------------------------F8N-60------------------------------------------------------------------
Notes:
1. All dimension units are millimeters.
2. All dimension tolerance is ±1mm unless otherwise noted.
Characteristics Absolute Maximum Rating at TA=25℃
Absolute Maximum Rating Parameter Symbo
60LEDs/m Unit
Forward Current IF 2000 mA
Forward Voltage VF DC 12V V
Electrostatic discharge ESD 400 V
Operating Temperature Topr -25 +60∽ ℃
Storage Temperature Tstg -40 +80∽ ℃
Electrical / Optical Characteristics at TA=25℃
Part No. Color Wavelength Lumen(lm) Power Viewing Angle CRI Certifications
HK-F8N-WW-30 ◆ 3000K-4000K 1200 24 120° 75 CE/ROHS
HK-F8N-W-30 ◆ 7000K-8000K 1350 24 120° 78 CE/ROHS
HK-F8N-R-30 ◆ 620-630nm 1050 24 120° -- CE/ROHS
HK-F8N-G-30 ◆ 515-530nm 1140 24 120° -- CE/ROHS
HK-F8N-B-30 ◆ 455-470nm 660 24 120° -- CE/ROHS
HK-F8N-Y-30 ◆ 585-590 nm 840 24 120° -- CE/ROHS
HK-F8N-WW-60 ◆ 3000K-4000K 2400 48 120° 75 CE/ROHS
HK-F8N-W-60 ◆ 7000K-8000K 2700 48 120° 78 CE/ROHS
HK-F8N-R-60 ◆ 620-630nm 2100 48 120° -- CE/ROHS
HK-F8N-G-60 ◆ 515-530nm 2280 48 120° -- CE/ROHS
HK-F8N-B-60 ◆ 455-470nm 1320 48 120° -- CE/ROHS
HK-F8N-Y-60 ◆ 585-590 nm 1680 48 120° -- CE/ROHS
Notes: 1. Tolerance of measurement of luminous intensity±15%. 2. All the technical parameters are based on per roll.
Typical Applications
■ Idea for in advertisement and cabaret, cabinet, furniture, landscape and architectural lighting
■ Flexible LED strip with 3M self-adhesive back nearly sticks to all kind of underground.
■ Easy installation dedicated for room- and deco-light!
■ The matched connector for easy install after cutting strip
Safety Information
■ The SMD light ribbon itself and all its components may not be mechanically stressed. Assembly
must not damage or destroy conducting paths on the circuit board.
■ Installation of LED light ribbon (with power supplies) needs to be comply with all applicable electrical
and safety standards. Only qualified personnel should be allowed to perform installations. Correct
electrical polarity needs to be observed. Wrong polarity may destroy the ribbon.
■ Parallel connection is highly recommended as safe electrical operation mode.
■ Serial connection is not recommended. Unbalanced voltage drop can cause hazardous overload
and damage the ribbon.
■ Please ensure that the power supply is of adequate power to operate the total load.
■ When mounting on metallic or otherwise conductive surfaces, there needs to be an electrical
insulated points between ribbon and the mounting surface.
■ Please pay attention to standard ESD precautions when installing the ribbon.
■ Damaged by corrosion will not be honored as a materials defect claim. It is the user’s responsibility
to provide suitable protection against corrosive agents such as moisture and condensation and other
harmful elements.
Package
5meter per roll
Recommended