CHEER TIME ENTERPRISE (Taiwan IPO Listed No. ３２２９） CHEER TIME ENTERPRISE (Taiwan IPO...

　 　 CHEER TIME ENTERPRISECHEER TIME ENTERPRISE (Taiwan IPO Listed No. (Taiwan IPO Listed No. ３２２９３２２９））

　　　　　　 convenience of location rapid and stable delivery　　　 guarantee of fine quality　　　 outstanding operation team　　 RoHs Comp. production 　 accept all types of order

Contact usTaipei main company tel: 886-2-22052032Taipei main company fax: 886-2-22053346Taipei office Address: No. 311, Chyong Lin S. Rd., Hsin Chuang, 242 TaipeiHsien, Taiwan, R.O.C. China plant tel: 86-573-88580888 #8877(Sales Dep.)China plant fax: 86-573-88580858China Plant address: 1108ZHENHUA ROAD, TONGXIANG ECONOMIC DEVELOPMENT ZONE. ZHEJIANG CHINA

Website http://www.cheer-time.com China e-mail:sales@cheer-time.com.cn Taiwan e-mail:sales@cheer-time.com.tw

Since:1987

★PCB professional manufacturer

Brief Introduction

◆ Cheer Time Enterprise was set up in 1987, for over 20 years till now, and merge China Lian Cheng Technology in May, 2006 with 100% holding as our China plant. (ZHE JIANG CHEER TIME)

◆ Capital: USD 20,000,000 (Zhe Jiang Cheer Time $ 15,000,000)

◆ Ground area: 45,000 squaremeters

Building area: 28,000 squaremeters

◆ Employees: about 1000 (ZHE JIANG CHEER TIME 600)

◆Total capacity ： 600,000 square feet (Zhe Jiang plant 300,000 feet)

◆Taiwan Hsinchuang & Taoyuan plant mainly focus on small quantity, various types and fast delivery (Over 1,500 types per month). Zhe Jiang Cheer Time focus on medium and large scale production.

CHEER TIME ENTERPRISE CHEER TIME ENTERPRISE

Cheer Time plant (Hsin Chuang 1st plant, Kuei Shan 2nd plant, Zhe Jiang 3rd plant)

Hsin Chuang 1st plant

Guei Shan

2nd plant

Zhe Jiang 3rd plant

Production Overview

CHEER TIME ENTERPRISE CO., LTDCHEER TIME ENTERPRISE CO., LTD

ProductionProduction CapacityCapacity Capacity Capacity DescriptionDescription PurposePurpose

Multi-LayerMulti-Layer

75%(16L)75%(16L)

(mainly for (mainly for

4-6L)4-6L)

Design: 450,000 ftDesign: 450,000 ft²²

Present: 280,000 ftPresent: 280,000 ft²²

NB peripheral products, NB peripheral products, special power, network special power, network communication,communication, ，， industindustrial / medical / airplane rial / medical / airplane PCB, monitoring PCB, monitoring system…,etc.system…,etc.

Double SideDouble Side 25%25%Design: 150,000 ftDesign: 150,000 ft²²

Present: 120,000 ftPresent: 120,000 ft²²

Backlight modules, Backlight modules, automotive electronics, automotive electronics, industrial electronics, industrial electronics, consumer electronics, consumer electronics, power, etc.power, etc.

Single SideSingle Side N/AN/A N/AN/A Present customer only.Present customer only.

◆Material ： Lead free 、 High TG 、 halogen free 、 ceramic 、 Teflon 、 aluminum

◆ Layer ： 2L-16L

◆Minimum trace width/space ： 3 MIL/ 3MIL(1/3 OZ) ， 4 MIL/4 MIL

◆Board thick ： 0.1mm-3.2mm

◆Copper weight ： 1/3OZ-4OZ

◆Minimum hole ： 0.2mm

◆Min. solder mask space: 1MIL

◆Impedance control ： tolerance +/-10%

◆Surface finish ： Lead Free HASL 、 OSP(Entek) 、 ENIG 、 Immersion silver(Taiwan) 、 Immersion Tin (Taiwan)

Process Capability

CHEER TIME ENTERPRISE CO., LTDCHEER TIME ENTERPRISE CO., LTD

Shear material

Multi-layer production process(For Mass Lam process this page)

Inner layer exposureInner layer exposureInner layer drillInner layer drill

XX–RAY spot facing–RAY spot facing Lay upLay up

Inner layer etchInner layer etch

Double sideDouble sideProcessProcess

Brown oxideBrown oxide

PTH.1st copperPTH.1st copper Trace exposureTrace exposure

Etch & StripingEtch & Striping QCQC Solder maskSolder mask

Double side production process and equipment

Shear materialShear material DrillingDrilling

2nd copper + Tin-lead2nd copper + Tin-lead

HASLHASL Silk ScreenSilk Screen CNC RoutingCNC Routing

O/S testingO/S testing

Double side production process and equipment

FQCFQC PackingPacking

Advanced inspect equipment in Plant 1 & 2Controlled Impedance Test System

XRF

Magnifier

Ionic Contamination Test Machine

outstanding, skilled CAM engineering team

Auto film pressing machineProduction equipment in Plant 1 & 2

ENIG line

◆ New, high-speed, high-efficiency drilling machine

◆ Parallel exposure machine importes from West Germany which is well-known for precision instruments

◆ To assure the perfect of all traces

◆ Fabulous trace scanning system Strict quality control◆ : AOI 、 UN 、 Flying probe

◆ 12 computer-controlled rapid shaping machines

◆ Fast and precise V-CUT machine ◆ Hole Inspection Machine

◆ 3D measuring instrument

◆Perfect Solder mask print ◆hole plug Different S/M color Clear legend screen◆ ◆

◆Strict-controlled auto-plating line ◆ Small hole plating& impedance requirement ◆Comply with High TG and RoHS production process

China plant equipment - Lay up

11

2 hot-press and 1 cold-press machine, capacity 600,000 feet 、 hot rivet machine 、 auto-back line 、 semi-automatic X-ray target drilling machine 、 Automatic brown oxide line 、 CNC peripheral routing machine 、 automatic edge trimming machine 、 DSline (thick under 0.4mm)

Drill, CNC routing, and V-cut

12

◆ 13 drill machine with 200,000 high speed 、 10 CNC machine 、 2 V-cut machine 、 2 high-tonnage Punch machine

13

2nd copper auto-line

PTH auto-line

1st copper auto-line

Inner/Outer layer trace

14

Solder Mask

15

Silkscreen & Surface finish

16

Testing and InspectingTesting and Inspecting

18

Cheer Time quality certificationCheer Time quality certification

20

UL 、 ISO9001 、 ISO14000 、 TS16949 、 QC080000

Copper thick testing, Ionic testing, micro-section analysis, impedance testing system, substance examine, and laboratory

5000 tons of wastewater discharge qualified5000 tons of wastewater discharge qualified

END

Restaurant and Recreation Facilities

Thanks for

your attention!