View
1
Download
0
Category
Preview:
Citation preview
T F W
6 0 4 . 5 4 9 . 9 3 7 9604.549.9555f l u x w e r x . c o m
All rights reserved. © Fluxwerx Illumination Inc 2017
Due to continuous product improvements, specifications and dimensions are subject to change without notice. Certain options have limited compatibility with some other product selections. Consult www.fluxwerx.com for most current technical information.
PAGE1 of 2
®
IDC-GRID-SPECDATANov, 2017
Ceiling (G) GRID INTEGRATED MOUNTING Type
Project
Product
Notes
FEATURES• integrated driver|BP, suspension point and power feed location• driver|BP can be installed in advance of luminaires• multiple orientations for easy access, installation and maintenance.• universal design for mounting ON grid or OFF grid through ACT• optional detached mounting method for shallow plenum spaces• suitable for all grid ceiling system heights up to 1.75" (44 mm)• prewired driver with integral barriers for line and low voltages• standard 120-277V multivolt or 347V line voltage drivers available• optional 120-277V BP drivers available; test light/button in canopy• supplied with all pushwire and twistwire electrical connectors
CONSTRUCTION• enclosure and components formed in 22 gauge CRS; satin coat• multiple 1/2" trade knockouts for conduit; rigid or flexible • prewired driver #18 gauge solid; pushwire and twistwire connectors• Standard 3" (76 mm) dia. white injection molded canopy; UV stable• BP 5.50" (140 mm) dia. canopy with integrated test light/button• 0.04" (1.0 mm) stainless steel aircraft cable; factory crimped
APPROVALS
• Certified by UL for dry or damp location installation in US and Canada• CCEA approved for Chicago plenum installation
NON-IC RATED – SPACING CRITERIA
• Keep insulation, building members and other driver enclosures at least 3 inches (76mm) away from all sides of the enclosure
• For 8 foot fixture enclosures at 47W per 4 foot, ensure 12 inches (300mm) of clearance from the center of the enclosure on all sides and 3 inches (76mm) from the top surface
Detached Installation Method
Alternative installation method for shallow plenum spaces, or where structural or mechanical obstructions interfere with mounting points.
Uses the universal mounting clip. Requires a horizontal switchbox,conduit, connectors and fasteners; supplied and installed by others.
Uses the universal mounting clip. Requires a Caddy 512 bar, switchbox, conduit, connectors and fasteners; supplied and installed by others.
Multivolt 120 - 277 V or 347V Non-Dim or Dimming driverHorizontal or Vertical orientation; shown mounted ON grid
Battery Pack enclosure with test light/button in canopy; or 347V transformer versionHorizontal or Vertical orientation; shown mounted OFF grid
ON GRID OFF GRID
MAX1.75(44)4.25
(108)
Universal grid mounting clip is suitable for mounting ON grid or OFF grid through ACT.Compatible with suspended ceiling systems with maximum grid heights ≤ 1.75" (44 mm)
• Flat T Grid 9/16" or 15/16"• Tegular 9/16" or 15/16"• Slot Grid 9/16"• Dimensional T 9/16"
OR
OR
® (G) GRID INTEGRATED MOUNTING
All rights reserved. © Fluxwerx Illumination Inc 2017
Due to continuous product improvements, specifications and dimensions are subject to change without notice. Certain options have limited compatibility with some other product selections. Consult www.fluxwerx.com for most current technical information.
PAGE2 of 2
IDC-GRID-SPECDATANov, 2017
Standard Battery Pack
Installation Wiring Details
Multivolt 120 - 277V or 347VNon-Dim or Dimming Driver
120 - 277V Battery Pack withNon-Dim or Dimming Driver
Canopies
Universal Grid Mounting Clip
For integrated driver|BP mounting, suspension and power feed locations; ON or OFF grid in either vertical (A) or horizontal (B) orientations. Detached driver mounting method also possible. Suitable for ceiling systems with grid heights < 1.75” (44 mm).
Shown above: Multivolt 120 - 277V or 347V driver enclosure ON grid
branch wiring conduit and wiresupplied and installed by others
driver factory prewired for all circuits;canopy conduit sleeves and all pushwire and twistwire connectors supplied by Fluxwerx; connected by others
LV powercord preinstalled on fixture by Fluxwerx; connected by othersLV powercord may have 2, 4 or 8 conductors
branch wiring conduit and connectorssupplied and installed by others
driver factory prewired for all circuits;canopy conduit sleeves and all pushwire, twistwire and crimpwire connectors supplied by Fluxwerx; connected by others
LV powercord preinstalled on fixture by Fluxwerx; connected by othersLV powercord may have 2, 4 or 8 conductors Battery test switch has 4 conductors
BP Onlyw/ test button
120 - 277Vor 347V
Maximum Intalled Dimensions - ON or OFF Grid
w h d
120-277V BP or 347V 120-277V BP or 347V 120-277V BP or 347V
Vertical Position 4.00 (102) 6.50 (163) 19.25 (488) 21.00 (533) 1.50 (39) 2.25 (58)
Horizontal Position 16.50 (419) 17.75 (450) 7.00 (178) 9.50 (242) 1.50 (39) 2.25 (58)
shown with bracket for BP test/light pushbutton
OFF grid installations through ACT require the use of Caddy 512 hanger bar, supplied and installed by others
Alternative Mounting Options
New or Retrofit(D) Drywall Integrated
0-10V Dim Lutron
120-277V 347V
eldoLED
Battery Pack
Perpendicular or Parallel Retrofit Method
Integrated driver, power feed and mounting suspension pointssuitable for GWB or plaster thicknesses of < 0.875” (22 mm)
Hard Lid Ceilings
Integrated Power Feed Canopy Suspension Canopy
(S) Structure Integrated
Integrated driver, power feed and mounting suspension pointssuitable for exposed surface conduit or recessed junction boxes
0-10V Dim Lutron eldoLED
120-277V 347V Battery Pack
inches
(mm)dimensions
0.28
(7)
3.00
(76)
5.50
(140)
3.93
(100)
1.63
(41)
3.46
(88)
3.11
(79)
Can be installed ON or OFF gridhorizontal or vertical orientation
• Flat T Grid (9/16" or 15/16") • Slot Grid (9/16")• Tegular (9/16" or 15/16") • Dimensional T (9/16")
A
B
OR
A
Vertical
Position
B
Horizontal
Position
d A (w)
A (h)
B (h)
B (w)
1.75(44)
MAX.
0.71
(18)
Hard Lid Ceilings(R) Remote
0-10V Dim
120-277V
Lutron
347V
eldoLED
Battery Pack
External remote mounted driver. Power feed and suspensionpoints suitable for exposed conduit or recessed junction boxes
Recommended