View
1.560
Download
11
Category
Preview:
DESCRIPTION
How to project a 3D Manikin into a 2D drawing using CATIA V5R17. Please visit our free website at http://bndtechsource.ucoz.com
Citation preview
BND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSource
How to Project CATIAHow to Project CATIAHow to Project CATIAHow to Project CATIA3D Ergonomic Manikin3D Ergonomic Manikin3D Ergonomic Manikin3D Ergonomic Manikin
Website = http://bndtechsource.ucoz.com Prepared by: Bill Harbin –Technical Director 12-Sep-09
3D Ergonomic Manikin3D Ergonomic Manikin3D Ergonomic Manikin3D Ergonomic ManikinInto 2D DrawingInto 2D DrawingInto 2D DrawingInto 2D Drawing
BND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSource� The following licenses are required to
project 3D Ergonomic Manikins into CATIA 2D drawings:
Prepared by: Bill Harbin –Technical Director 12-Sep-09
� Digital Mockup Optimizer� Ergonomics Design & Analysis� Mechanical Design Drafting
BND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSource� Step 1: Project the 3D geometry normally
into a 2D drawing.
Prepared by: Bill Harbin –Technical Director 12-Sep-09
BND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSource� Step 2: Create an additional (duplicate)
view and Superimpose it on the first view.
Prepared by: Bill Harbin –Technical Director 12-Sep-09
BND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSource� Next, Rename the new view and change
the View Generation Mode to CGR.
Prepared by: Bill Harbin –Technical Director 12-Sep-09
In Properties of the view, change the View Generation Mode to CGR.
BND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSource� Step 3: Position the Manikin in 3D space
as you would like it to project into 2D.
Prepared by: Bill Harbin –Technical Director 12-Sep-09
BND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSource� Step 4: Use DMU Optimizer to create a
Silhouette of the Manikin.
Silhouette Icon
Reference Product
Prepared by: Bill Harbin –Technical Director 12-Sep-09
Silhouette Icon
Selection is the Manikin
BND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSource� Step 5: Save the Silhouette as a .model file.
Prepared by: Bill Harbin –Technical Director 12-Sep-09Save as .model file
BND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSource� Step 6: Add the .model into the Product
used for the 2d drawing.Hide all other parts that
have already been projected into the 2D drawing
Prepared by: Bill Harbin –Technical Director 12-Sep-09If the .model geometry doesn’t show, activate Representations+Design Mode of the Product
BND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSource� Step 7: Update the Manikin view in the 2d
drawing.
Prepared by: Bill Harbin –Technical Director 12-Sep-09Only Update this one view. Otherwise, you will lose the geometry already projected
into the first view.
BND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSource� Step 8: You may have to Superimpose the views
again. Also, you may want to change the line graphics of the Manikin (CGR) view.
Prepared by: Bill Harbin –Technical Director 12-Sep-09
Hide the first view, Activate the Manikin view, Drag a window about the view, change the line graphic from the
pull down menu.
BND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSource� Step 9: Show the first view and Lock the
Manikin view.
Prepared by: Bill Harbin –Technical Director 12-Sep-09
Recommended