View
35
Download
2
Category
Preview:
DESCRIPTION
DOCUMENT1
Citation preview
TABLE OF CONTENTS
INTRODUCTION ........................03SPECIFICATIONS........................04
I. CABLE TRUNKING ..................05
II. CABLE TRAY............................10
III. CABLE LADDER ...................15
05
09
11
06
02
03
01
0804
0710
01 straight tray02 �at bend03 �at tee04 �at four way 05 internal bend 06 external bend 07 center reducer 08 left reducer 09 right reducer 10 end cap 11 end �ange
CABLE TRAY & LADDER FITTINGS
INTRODUCTION
03
Reetech cable trunking, cable tray, cable ladder are designed and manufactured under basic standards of R.E.E Electric Appliances Joint Stock Company [TCCS 10:2015/REETECH], in compliance with national and international standards such as TCVN 197 : 2002, IEC 61537 : 2001, Nema VE1 2009.
Basic material to manufacture cable tray & ladder is galvanized steel sheet in conformity with JIS G3302 standard or black steel sheet in accordance with JIS G3141 standard, in common thicknesses as follows:
- Galvanized steel sheet: 0.95 – 1.15 – 1.48 – 1.95 [mm].
- Cold-rolled black steel sheet: 1.0 – 1.2 – 1.5 – 2.0 [mm].
For the purposes of anti-oxidation and anti-corrosion to the surface, depending on demand, cable tray & ladder may be hot-dip galvanized in accordance with standards of AS/NZS 4680-2006, ASTM A123/A 123A1 or electrostatic powder coating in confor-mity with standards of ASTM D3359-93, ASTM D3363-92A, ASTM D4138-94.
Depending on application, electrostatic powder coating material may be chosen to be suitable with indoor or outdoor environment with the following common painting colors:
- Yellow Orange: RAL 2000.
- Red Orange: RAL 2001.
- Green Blue: RAL 5001.
- Concrete Grey: RAL 7023
TMC-3F-SE1-1510 www.airduct.vn
04
INTRODUCTION
Width W [mm] 75 100 150 200 300 450 600 750 900Cable trunking 0.95 0.95 0.95 1.15 1.15 1.48 Cable tray 1.15 1.15 1.48 1.95 1.95 1.95 Cable ladder 1.48 1.95 1.95 1.95 1.95
Connector SC: It is used to connect straight trunking, straight tray, straight ladder with each other or to other �ttings.
25
45
10
50
2518
Ø7x15
25
H-5
10
50
25
Ø7x15
e
SC of cable trunking, cable tray with height H = 50mm
Order Code: SC-50
SC of cable trunking, cable tray, cable ladder with height H ≥ 75mm
Order Code: SC-HH (mm) 75 100 150
e (mm) 40 50 100
TMC-3F-SE1-1510
Speci�cations:Maximum length:- Cable trunking and tray: 2.5m.- Cable ladder: 2.4m.
Standard height H:- Cable trunking: 50, 75, 100 [mm].- Cable tray: 50, 75, 100, 150 [mm].- Cable ladder: 100 [mm].
In addition to above-mentioned materials as well as common speci�cations ,cable tray & ladder may be produced with di�erent materials, painting colors and dimensions as requested.
www.airduct.vn
Thickness of galvanized steel sheet [mm]:
I. CABLE TRUNKING
05
10
10
W
H
25
Ø7x15
10
10
Cap
W1
50
H
W2
50
50
50
10
25
Ø7x15
10
I.1 – Straight trunking STR: Order Code: STR-WxH
I.2 - Flat bend trunking FBTR: Order Code: - If W1 = W2: FBTR-W1xH - Other cases: FBTR-W1/W2xH
TMC-3F-SE1-1510 www.airduct.vn
I. CABLE TRUNKING
06
10
W3
10
50
50
50
50
Ø7x15
W1
50
H
W2
50
50
50
25
10
W3
10
W4
Ø7x1550
W1
50
H
W2
50
50
50
25
50
I.3 - Flat tee trunking FTTR: Order Code: - If W1 = W2 = W3: FTTR-W1xH - Other cases: FTTR-W1/W2/W3xH
I.4 - Flat four way trunking FFWTR: Order Code: - If W1 = W2 = W3 = W4: FFWTR-W1xH - Other cases: FFWTR-W1/W2/W3/W4xH
TMC-3F-SE1-1510www.airduct.vn
07
I.5 - Internal bend trunking IBTR: Order Code: IBTR-WxH
I.6 – External bend trunking EBTR: Order Code: EBTR-WxH
H
W
10
10
Ø7x15
50
50
H
5025
50
H
W
Ø7x15
50
50
10
10
H50
50
25
TMC-3F-SE1-1510 www.airduct.vn
I. CABLE TRUNKING
08
W2
A
B
A
W1
H
W2
W1
H
AB
A
W2
W1
H
A
B
A
25
10
10Ø7x15
I.7 - Left reducer trunking RTR-L: Order Code: RTR-L-W1/W2xH
I.8 - Right reducer trunking RTR-R Order Code: RTR-R-W1/W2xH
I.9 - Center reducer trunking RTR-C Order Code: RTR-C-W1/W2xH
W1/W2 (mm) A (mm) B (mm)
≤ 200 100 100
> 200 100 200
W1/W2 (mm) A (mm) B (mm)
≤ 200 100 100
> 200 100 200
W1/W2 (mm) A (mm) B (mm)
≤ 200 100 100
> 200 100 200
TMC-3F-SE1-1510www.airduct.vn
09
I.10 - End cap trunking ECTR: Used to cover the ends of cable trunking. Order Code: ECTR-W-50 In case cable trunking with height H = 50mm.
I.11 - End �ange trunking EFTR: Used to connect cable trunking to the cabinet. Order Code: EFTR-WxH
Order Code: ECTR-W-HIn case cable trunking with height H ≥ 75mm.
50
10
25
45 W-5
Ø7x15
50
10
W-510
25
Ø7x15
H-5
50
W
50
H
50
25
Ø7x15
TMC-3F-SE1-1510 www.airduct.vn
II. CABLE TRAY
10
H
Ø7x15W
20
20
25
24 25 50
75
37.5
Ø7x2017.5 13.75 27.5
75
37.5
Ø7x15
Perforation:Perforation in the base area of cable tray is classi�ed of group B by IEC 61537 : 2001. Either of two following speci�cations shall be at manufacturer's option:
II.1 - Straight tray STH Order Code: STH-WxH
Speci�cation 1 Speci�cation 2
TMC-3F-SE1-1510www.airduct.vn
11
W1 W2
150
100
150
100
Ø7x15
25
H
20
20
W1 W2
100
150
100
W3
150
100
H
20
20Ø7x15
15025
II.3 - Flat tee tray FTTH: Order Code: - If W1 = W2 = W3: FTTH-W1xH - Other cases: FTTH-W1/W2/W3xH
II.2 - Flat bend tray FBTH: Order Code: - If W1 = W2: FBTH-W1xH - Other cases: FBTH-W1/W2xH
TMC-3F-SE1-1510 www.airduct.vn
II. CABLE TRAY
12
II.4 - Flat four way tray FFWTH: Order Code: - If W1 = W2 = W3 = W4: FFWTH-W1xH - Other cases: FFWTH-W1/W2/W3/W4xH
W1 W2
150
100
150
100
20
W3
150
W4
150
100
25
H
20
100
Ø7x15
TMC-3F-SE1-1510www.airduct.vn
13
W
B
B
C
C
25
20H
Ø7x15
H
W
C
B
C
B
25
20
Ø7x15
II.6 - External bend tray EBTH: Order Code: EBTH-WxH
II.5 - Internal bend tray IBTH: Order Code: IBTH-WxH
TMC-3F-SE1-1510
W (mm) B (mm) C (mm)
= 150 100 140
≥ 200 100 200
W (mm) B (mm) C (mm)
= 150 100 140
≥ 200 100 200
www.airduct.vn
II. CABLE TRAY
14
W1
H
20
W2
A
C
A
W1
H
20
W2
A
C
A
W2
W1
H25
Ø7x15
20
A
C
A
II.7 – Left reducer tray RTH-L: Order Code: RTH-L-W1/W2xH
II.8 - Right reducer tray RTR-R: Order Code: RTH-R-W1/W2xH
II.9 - Center reducer tray RTH-C: Order Code: RTH-C-W1/W2xH
TMC-3F-SE1-1510
W1/W2 (mm) A (mm) C (mm)
≤ 200 100 140
> 200 100 200
W1/W2 (mm) A (mm) C (mm)
≤ 200 100 140
> 200 100 200
W1/W2 (mm) A (mm) C (mm)
≤ 200 100 140
> 200 100 200
www.airduct.vn
III. CABLE LADDER
15
W1
300
W225
150150300
20
H
Ø7x15
20
H
W
150
300
4020
50
Ø7x15
25
III.2 - Flat bend ladder FBL: Order Code: - If W1 = W2: FBL-W1xH - Other cases: FBL-W1/W2xH
III.1 - Straight ladder SL: Order Code: SL-WxH
TMC-3F-SE1-1510 www.airduct.vn
III. CABLE LADDER
16
W3
W1
300
W2
H
150150300
20
150
300
25
Ø7x15
W4
W1
300
W2
H
150150300
20150
300
25 150
300
W3Ø7x15
III.3 - Flat tee ladder FTL:Order Code: - If W1 = W2 = W3: FTL-W1xH- Other cases: FTL-W1/W2/W3xH
III.4 – Flat four way ladder FFWL:Order Code: - If W1 = W2 = W3 = W4: FFWL-W1xH- Other cases: FFWL-W1/W2/W3/W4xH
TMC-3F-SE1-1510www.airduct.vn
17
20
W
300
300
W
150
150
25
H
Ø7x15
300W
150
W
150
300
20
25
H
Ø7x15
III.5 - Internal bend ladder IBL:Order Code: IBL-WxH
III.6 - External bend ladder EBL:Order Code: EBL-WxH
TMC-3F-SE1-1510 www.airduct.vn
III. CABLE LADDER
18
W1
300
300
W2
20
H
25
150300
W1 H
W2
300
300
150
300
2025
300
300
150300
150
W2
W1
H
20
25
Ø7x15
III.7 - Left reducer ladder RL-L:Order Code: RL-L-W1/W2xH
III.9 - Center reducer ladder RL-C:Order Code: RL-C-W1/W2xH
III.8 - Right reducer ladder RL-R:Order Code: RL-R-W1/W2xH
TMC-3F-SE1-1510www.airduct.vn
Testing results of Reetech Cable Trunk-ing, Cable Tray, Cable Ladder under stan-dards: NEMA VE1, ASTM E376, TCVN 197.
Performed by Quality Assurance and Testing Center 1 (Quatest 1).
Yellow Orange (RAL 2000) Red Orange (RAL 2001)
Green blue (RAL 5001) Concrete Grey (RAL 7023)
Code of common powder coating colors
Recommended