View
9
Download
0
Category
Preview:
Citation preview
ANKORIG.ITEN
CASING FOR MICROPILES AND TUNNELING
FULL-THREADED BARS
SELF-DRILLINGANCHORS
PRODUCTS, SERVICES AND ACCESSORIES FOR
GEOTECHNICS
TUNNELLING
MINING
MICROPILES
CASING
ANCHORING
SELF-DRILLING ANCHORS
THREADING
BOLTING
NAILING
CONSOLIDATION
DEEP FOUNDATIONS
THREADING
THE COMPANY
MICROPILE CASING
TENSO.RIG ANCHOR BARS
TENSO.RIG PRE-INJECTED ANCHOR BARS
SELF-DRILLING ANCHOR BARS
04 - 05
06 - 09
10 - 11
12 - 13
14 - 17
Ankorig is a company that specialises in the production of geotechnical materials and equipment, ground consolidation, tunnelling, anchoring and mining.
Ankorig was founded on twenty years’ experience in the piling sector, thanks to the collaboration of experts already working in the geotechnical field for many years.
Ankorig provides solutions for every type of application, supporting custom-ers in every stage of the works, from the project to the execution.
THE COMPANYExperience in consolidation
The Company | Experience in strengthening
Ankorig guarantees fast delivery; the Bagnatica and Carobbio degli Angeli factories stretch for over 5,000 m2 of covered production space.
Wide range of available materials
Ground consolidationActive and passive anchoring Tunneling
MiningRock-fallSpecial foundations
Ankorig and its specific expertise:
Thanks to acquired experience and know-how, Ankorig has established itself as a leading company in the geological consolidation sector, earning a position on international markets, exporting over 80% of own production.
The continuous improvements in technology and the attention paid to market variations and demands guarantee customers complete support in the design and execution of operations of consolidation, anchoring and tunnelling etc.
Ankorig’s commitment continues even beyond the sale and supply of materials.
The company philosophy in terms of custo-mer care includes fully comprehensive technical assistance and support.
Micropile casing | Foundation and consolidation structures
The application is undertaken by drilling into the ground and inserting casing segments threaded together, until the desired depth is reached. Grout is injected into the casing, spreading, where necessary, through holes or valves in the casing, which allows the direct formation of a pillar in the ground.
Ankorig focuses on helping you save time because “getting the job done quickly” is where the real money lies.Only with the precision of every Ankorig process and component is possible to achieve the very best results.
Standard threads:Square (standard)RoundGas-type
Special double or triple-start threads can be produced.
Diam. 12 2-3 BarDiam. 16 2-3 BarDiam. 16 20 Bar
Micropile casing is used as deep foundation structures element for the support building works and infrastructures. Ankorig:
a fastwork
Aluminium and plasticinjection valves
The typical joint involves a Male/Female thread coupling between a series of pipe.
Based on the demands of the customer, Ankorig can produce Male/ Male/Sleeve or Female/Female/Nipple joints.
Developments in technique have extended the use of micropiles to soldier pile wall structures, umbrella roof for the temporary support of tunnels, jet-grouting and mines.
MICROPILE CASINGFoundation and consolidation structures
Types of process
Standard and customised accessories:Drill bits for all types of terrainInjection valvesCoupling jointsHead-Plates
Head Thread joint Injection valves End parts
Ring Bit Male/Female Valve (12mm/16mm) Injection head
Sacrificial Bit Male/Male + Sleeve Holes (12mm/16mm) Lifting Head
Customised Bit Female/Female + Nipple Manchette API machine adaptor
Conversion scale 1,0 MPA = 1,0 N/mm2 - Above values are valid for pipes with thickness from 3,0 ÷16,0 mm
Quality
Technical support
Innovative solutions
Just-in-time delivery
Special production on request
Micropile casing | Consolidation and foundation structures
Table of sizes
Steels used for micropiles
Kg/m Tube thicknessd (mm) 3.6 4.0 4.5 5.0 5.6 5.9 6.3 7.1 8.0 8.8 9.5 10.0 11.0 12.5 14.2 16.0 17.5 20.0 22.2 25.0 28.0 30.0
48.3 4.0 4.4 4.9 5.3 5.9 6.2 6.5 7.2 7.9 8.6 9.1 9.4 10.1 11.0
60.3 5.0 5.6 6.2 6.8 7.6 7.9 8.4 9.3 10.3 11.2 11.9 12.4 13.4 14.7 16.1 17.5 18.5
70.0 5.9 6.5 7.3 8.0 8.9 9.3 9.9 11.0 12.2 13.3 14.2 14.8 16.0 17.7 19.5 21.3 22.6 24.6
73.0 6.2 6.8 7.6 8.4 9.3 9.8 10.4 11.5 12.8 13.9 14.9 15.5 16.8 18.6 20.6 22.5 23.9 26.1
76.1 6.4 7.1 7.9 8.8 9.7 10.2 10.8 12.1 13.4 14.6 15.6 16.3 17.7 19.6 21.7 23.7 25.3 27.7
82.5 7.0 7.7 8.7 9.6 10.6 11.1 11.8 13.2 14.7 16.0 17.1 17.9 19.4 21.6 23.9 26.2 28.0 30.8 33.0 35.4
88.9 7.6 8.4 9.4 10.3 11.5 12.1 12.8 14.3 16.0 17.4 18.6 19.4 21.1 23.5 26.1 28.8 30.8 34.0 36.5 39.4
95.0 8.1 9.0 10.0 11.1 12.3 13.0 13.8 15.4 17.2 18.7 20.0 21.0 22.8 25.4 28.3 31.2 33.4 37.0 39.8 43.1
101.6 8.7 9.6 10.8 11.9 13.3 13.9 14.8 16.5 18.5 20.1 21.6 22.6 24.6 27.5 30.6 33.8 36.3 40.2 43.4 47.2 50.8 52.9
108.0 9.3 10.3 11.5 12.7 14.1 14.8 15.8 17.7 19.7 21.5 23.1 24.2 26.3 29.4 32.8 36.3 39.0 43.4 47.0 51.1 55.2 57.7
114.3 9.8 10.9 12.2 13.5 15.0 15.8 16.8 18.8 21.0 22.9 24.5 25.7 28.0 31.4 35.0 38.8 41.8 46.5 50.4 55.0 59.6 62.3
121.0 10.4 11.5 12.9 14.3 15.9 16.7 17.8 19.9 22.3 24.3 26.1 27.4 29.8 33.4 37.4 41.4 44.6 49.8 54.1 59.2 64.2 67.3
127.0 11.0 12.1 13.6 15.0 16.8 17.6 18.7 21.0 23.5 25.6 27.5 28.8 31.5 35.3 39.5 43.8 47.2 52.7 57.3 62.9 68.3 71.7
133.0 11.5 12.7 14.3 15.8 17.6 18.5 19.7 22.0 24.6 26.9 28.9 30.3 33.1 37.1 41.6 46.1 49.8 55.7 60.6 66.6 72.5 76.2
139.7 12.1 13.4 15.0 16.6 18.5 19.5 20.7 23.2 26.0 28.4 30.5 32.0 34.9 39.2 43.9 48.8 52.7 59.0 64.3 70.7 77.1 81.1
146.0 12.6 14.0 15.7 17.4 19.4 20.4 21.7 24.3 27.2 29.8 32.0 33.5 36.6 41.1 46.1 51.3 55.4 62.1 67.7 74.6 81.4 85.8
152.4 13.2 14.6 16.4 18.2 20.3 21.3 22.7 25.4 28.5 31.1 33.5 35.1 38.3 43.1 48.4 53.8 58.2 65.3 71.2 78.5 85.9 90.5
159.0 13.8 15.3 17.1 19.0 21.2 22.3 23.7 26.6 29.8 32.6 35.0 36.7 40.1 45.1 50.7 56.4 61.0 68.5 74.9 82.6 90.4 95.4
168.3 14.6 16.2 18.2 20.1 22.5 23.6 25.2 28.2 31.6 34.6 37.2 39.0 42.7 48.0 53.9 60.1 65.0 73.1 79.9 88.3 96.8 102.0
177.8 15.5 17.1 19.2 21.3 23.8 25.0 26.6 29.9 33.5 36.7 39.4 41.4 45.2 50.9 57.3 63.8 69.1 77.8 85.1 94.2 103.0 109.0
193.7 16.9 18.7 21.0 23.3 26.0 27.3 29.1 32.7 36.6 40.1 43.1 45.3 49.5 55.8 62.8 70.1 76.0 85.6 93.8 104.0 114.0 121.0
203.0 17.7 19.6 22.0 24.4 27.2 28.7 30.5 34.3 38.5 42.1 45.3 47.6 52.1 58.7 66.1 73.7 80.0 90.2 98.9 110.0 121.0 128.0
219.1 19.1 21.2 23.8 26.4 29.5 31.0 33.0 37.1 41.6 45.6 49.1 51.5 56.4 63.7 71.7 80.1 87.0 98.2 108.0 120.0 132.0 140.0
229.0 22.2 24.9 27.6 30.8 32.4 34.6 38.8 43.6 47.8 51.4 54.0 59.1 66.7 75.2 84.0 91.2 103.0 113.0 126.0 139.0 147.0
244.5 23.7 26.6 29.5 33.0 34.7 37.0 41.5 46.6 51.1 55.0 57.8 63.3 71.5 80.6 90.1 97.9 111.0 122.0 135.0 149.0 159.0
273.0 26.5 29.8 33.0 36.9 38.8 41.4 46.5 52.3 57.3 61.7 64.8 71.0 80.3 90.6 101.0 110.0 125.0 137.0 153.0 169.0 180.0
298.5 29.0 32.6 36.2 40.4 42.6 45.4 51.0 57.3 62.8 67.7 71.1 78.0 88.1 99.5 111.0 121.0 137.0 151.0 169.0 187.0 199.0
323.9 31.5 35.4 39.3 43.9 46.2 49.3 55.4 62.3 68.3 73.6 77.4 84.8 95.9 108.0 121.0 132.0 150.0 165.0 184.0 204.0 217.0
339.7 41.3 46.1 48.5 51.8 58.2 65.4 71.8 77.3 81.3 89.1 101.0 114.0 128.0 139.0 158.0 174.0 194.0 215.0 229.0
355.6 43.2 48.3 50.9 54.2 61.0 68.5 75.2 81.0 85.2 93.4 106.0 119.0 134.0 146.0 165.0 182.0 204.0 226.0 241.0
406.4 49.5 55.3 58.2 62.1 69.9 78.6 86.2 92.9 97.7 107.0 121.0 137.0 154.0 168.0 190.0 210.0 235.0 261.0 278.0
457.2 55.7 62.3 65.6 70.0 78.8 88.6 97.3 105.0 110.0 121.0 137.0 155.0 174.0 190.0 216.0 238.0 266.0 296.0 316.0
508.0 62.0 69.3 73.0 77.9 87.7 98.6 108.0 117.0 123.0 135.0 153.0 173.0 194.0 212.0 241.0 266.0 298.0 331.0 353.0
609.6 83.4 87.8 93.7 105.0 119.0 130.0 141.0 148.0 162.0 184.0 208.0 234.0 255.0 291.0 321.0 360.0 401.0 429.0
Steel quality S235 S275 S355 AJ55 AK55 AK80
Yield strength ≥ 235 N/mm2 ≥ 275 N/mm2 ≥ 355 N/mm2 ≥ 379 N/mm2 ≥ 379 N/mm2 ≥ 552 N/mm2
Tensile strength ≥ 340 N/mm2 ≥ 410 N/mm2 ≥ 490 N/mm2 ≥ 517 N/mm2 ≥ 655 N/mm2 ≥ 690 N/mm2
Tenso.rig anchor bars | Anchoring with continuos threaded barsp
d
s
A A
dettaglio G
dettaglio G
kr
90°
t
sezione A-A
50
63,5
Dn(mm)
20
25
28
32
40
Carico a SNERVAMENTO / ROTTURA MPa
500 / 550
555 / 700
S
500 / 550
500 / 550
500 / 550
500 / 550
500 / 550
670 / 900
670 / 900
H
670 / 900
670 / 900
670 / 900
670 / 900
670 / 900
900 / 1100
900 / 1100
X
900 | 1100
900 / 1100 900 / 1100
900 / 1100
900 / 1100
1.96350 15,41 48,9±0,5 48,3±0,6 2,8±0,3 12,0 2,75 26,0±0,3 81,5°
3.16763,5 24,90 67,6±0,5 60,0±0,6 2,5±0,3 12,2 2,75 21,0±0,3 82,5°
D(mm)
A(mm2)
G(kg/m)
s(mm)
t(mm)
k(mm)
r(mm)
p(mm)
d(mm)
31420 2,47 19,5±0,4 19,1±0,5 1,3±0,3 4,8 2,00 10,0±0,3 81,5°
49125 3,85 24,4±0,4 23,9±0,5 1,6±0,1 5,9 2,00 12,5±0,3 81,5°
61628 4,83 27,3±0,4 26,8±0,5 1,8±0,2 6,7 2,50 14,0±0,3 81,5°
80432 6,31 31,2±0,5 30,7±0,6 2,1±0,2 7,6 2,50 16,0±0,3 81,5°
1.25640 9,87 39,1±0,5 38,5±0,6 2,4±0,3 9,5 2,75 20,0±0,3 81,5°
1.080 kN
2.217 kN
TENSIONE AROTTURA
173 kN
270 kN
388 kN
442 kN
690 kN
981 kN
1.757 kN
TENSIONE ASNERVA-MENTO
157 kN
246 kN
308 kN
402 kN
628 kN
STANDARD HIGH EXTRA
dado standard giunti piastredado a cupola
TEN
SIO
NI R
IFER
ITE
ALLA
BAR
RA S
TAN
DARD
DATA SHEETTENSO.RIG
info@ankorig.it
Filettatura SX
ANKORIG SRL unipersonalevia Passo del Gavia 1-3 24060 BAGNATICA (BG)Tel. +39 035 683 211 - Fax +39 035 676 650
info@ankorig.it - www.ankorig.it
p
d
s
A A
dettaglio G
dettaglio G
kr
90°
t
sezione A-A
50
63,5
Dn(mm)
20
25
28
32
40
Carico a SNERVAMENTO / ROTTURA MPa
500 / 550
555 / 700
S
500 / 550
500 / 550
500 / 550
500 / 550
500 / 550
670 / 900
670 / 900
H
670 / 900
670 / 900
670 / 900
670 / 900
670 / 900
900 / 1100
900 / 1100
X
900 | 1100
900 / 1100 900 / 1100
900 / 1100
900 / 1100
1.96350 15,41 48,9±0,5 48,3±0,6 2,8±0,3 12,0 2,75 26,0±0,3 81,5°
3.16763,5 24,90 67,6±0,5 60,0±0,6 2,5±0,3 12,2 2,75 21,0±0,3 82,5°
D(mm)
A(mm2)
G(kg/m)
s(mm)
t(mm)
k(mm)
r(mm)
p(mm)
d(mm)
31420 2,47 19,5±0,4 19,1±0,5 1,3±0,3 4,8 2,00 10,0±0,3 81,5°
49125 3,85 24,4±0,4 23,9±0,5 1,6±0,1 5,9 2,00 12,5±0,3 81,5°
61628 4,83 27,3±0,4 26,8±0,5 1,8±0,2 6,7 2,50 14,0±0,3 81,5°
80432 6,31 31,2±0,5 30,7±0,6 2,1±0,2 7,6 2,50 16,0±0,3 81,5°
1.25640 9,87 39,1±0,5 38,5±0,6 2,4±0,3 9,5 2,75 20,0±0,3 81,5°
1.080 kN
2.217 kN
TENSIONE AROTTURA
173 kN
270 kN
388 kN
442 kN
690 kN
981 kN
1.757 kN
TENSIONE ASNERVA-MENTO
157 kN
246 kN
308 kN
402 kN
628 kN
STANDARD HIGH EXTRA
dado standard giunti piastredado a cupola
TEN
SIO
NI R
IFER
ITE
ALLA
BAR
RA S
TAN
DARD
DATA SHEETTENSO.RIG
info@ankorig.it
Filettatura SX
ANKORIG SRL unipersonalevia Passo del Gavia 1-3 24060 BAGNATICA (BG)Tel. +39 035 683 211 - Fax +39 035 676 650
info@ankorig.it - www.ankorig.itThe continous thread is created directly by means of hot plastic deformation.Tenso.Rig bar has a vast and increasing field of application, given that its versatility and the use of suitable accessories (standard or specific) allow the development of new technical solutions or to improve traditional applications to make them more effective.
Resin-anchored rock boltsMicropiles, installed using groutConnectors for concrete elementsHot-dip galvanisation and electro-galvanisation upon customer request.
Advantages of full thread:
Size the bar via direct cutting on site.
Lengthen the system by connecting extra bars using the sleeve joints
Bend the bar freely to achieve the required form, maintaining full use of both screw ends.
Increase the adherence between the steel of the bar and the injected grout.
The Tenso.Rig bars are solid B500B or S670 steel bars with full left-hand thread and a special profile.
Steel B500B Steel S670
Code Yield strength Tensile strength Diam.(mm) Yield strength Tensile strength Code
TS20 157 kN 173 kN 20 213 kN 251 kN TS20H
TS25 246 kN 270 kN 25 333 kN 392 kN TS25H
TS28 308 kN 388 kN 28 418 kN 492 kN TS28H
TS32 402 kN 442 kN 32 546 kN 643 kN TS32H
TS40 628 kN 690 kN 40 854 kN 1004 kN TS40H
TS50 981 kN 1080 kN 50 1316 kN 1548 kN TS50H
TS63.5 1757 kN* 2217 kN* 63.5 2153 kN 2533 kN TS63,5H
Technical specifications
Resin-anchored rock bolts
Micropiles produced using grout
Connectors for concrete elements
Spherical nut
PVC spacer
Standard nut
Coupling Plate
TENSO.RIG ANCHOR BARSAnchoring with continuos threaded bars
Diam.(mm)
Area(mm²)
Weight(kg/m
d (mm)
s (mm)
t(mm)
k(mm)
r(mm)
p(mm)
A(mm²)
20 314 2.47 22.1±0.4 19.1±0.5 1.3±0.3 4.8 2.00 10.0±0.3 81.5°
25 491 3.85 27.6±0.4 23.9±0.5 1.6±0.1 5.9 2.00 12.5±0.3 81.5°
28 616 4.83 30.5±0.4 26.8±0.5 1.8±0.2 6.7 2.50 14.0±0.3 81.5°
32 804 6.31 35.4±0.5 30.7±0.6 2.1±0.3 7.6 2.50 16.0±0.3 81.5°
40 1256 9.87 43.9±0.5 38.5±0.6 2.4±0.3 9.5 2.75 20.0±0.3 81.5°
50 1963 15.41 54.5±0.5 48.3±0.6 2.8±0.3 12.0 2.75 26.0±0.3 81.5°
63.5 3167 24.90 67.6±0.5 60.0±0.6 2.5±0.3 12.2 2.75 21.0±0.3 82.5°
*Steel S555 Left-hand thread bar
Detail g
Detail g
Section A-A
Left-hand thread bar
Tenso Rig Bar
Strong corrosion resistance Protection against Eddy CurrentsStrong mechanical resistance Waterproof and damp-proof
The dual protection system has multiple advantages:
The lower part of the bar is encased and protected by a heat-shrink cap. In the event of having to join two or more bars together, the coupling is recommended through the use of two short nuts and a sleeve (this is to avoid an accentuated bending on the bars) or alternatively a sleeve of longer length and finally a heat shrinkable sleeve (this operation takes place directly on job site).The head of the bar is made up of heat-shrink protection, a section of free bar (around 20 cm), a nut and a perforated bearing plate.
The dual protection system has multiple advantages:
Strong corrosion resistance
Protection against Eddy Currents
Strong mechanical resistance
Waterproof and damp-proof
TENSO.Rig pre-injected anchor bars are made up of a full continuos threaded bar protected by corrugated sheat in high-density polyethylene (HDPE) and by grout injection along the whole bar.
TENSO.RIG PRE-INJECTED ANCHOR BARS
The bars could be between 1m and 12m longTenso-rig preinjected bar datasheet:
The sheat made of high density polyethylene (HDPE), thanks to its corrugated shape, allows the distribution of the tensile force to the injected grout and then to the ground. The size of the thread varies depending on the thread bar used.
SIZE TR 25 TR28 TR32 TR40 TR50 TR63
L: left-hand thread L L L L L L L
External diameter mm 25 28 32 40 50 63.5
External diameter casing mm 55 55 65 70 85 100
Section mm² 491 616 804 1256 1936 3167
Tensile strength KN 270 388 442 690 1080 2217
Rm MPa 500 500 500 500 500 555
Yield strength KN 246 308 402 628 981 1757
Material quality B500B B500B B500B B500B B500B S555S
Weight KG / MT 3.85 4.83 6.31 9.87 15.41 24.90
Weight with grout KG/MT 7.0 7.50 10.00 14.00 21.50 32.50
Corrugated casing
Heat-shrink casing
Short nut
Steel coupling
Bar
Cement
Hexagonal nut
Plate with holeTenso .Rig bar
Heat-shrink protectionHeat-shrink cap
Heat-shrink sleeve
Plastic manchette injection tube 12/16
Plastic spacer
Corrugated sheetCement injection
The self-drilling hollow anchor is a very versatile tool, which guarantees maximum flexibility and speed of installation.
The threaded profile has multiple functions:
acts as a connector, enabling a series of bars to be joined together, using couplings;enables the installation of the drilling bit most suited to the ground conditions;it is used for direct attachment to the drilling machine;enables the bar to be cut to the desired length, whilst maintaining the threaded end; the corrugated form increases adherence between the steel and the grout or injected resin.
Spherical nut
Standard nut
Coupling Bit
Plate
The self-drilling hollow anchor bar carries out three functions:
Drilling rod Injection pipeStructural element
These instruments are used for nailing, anchoring and micropiling, in earth or in rocks.
The bars are produced using plastic de-formation, creating the full ISO 10208 thread on the outer surface of a pipe.
SELF-DRILLING ANCHOR BARSHollow full threaded anchor bars
Self driling bars | Self drilling anchors
A wide range of accessories are available based on worksite requirements:
Drilling bits for all types of terrainCouplingsNuts and lock nutsPlatesAdaptors
Self-drilling bars
Type of bar Yield strength
Tensile strength Section Weight Thickness Nominal
diam.
32-210 160 kN 210 kN 330 mm² 2.7 kg/m 4.00 mm 32 mm
32-250 190 kN 250 kN 370 mm² 2.9 kg/m 4.30 mm 32 mm
32-280 220 kN 280 kN 410 mm² 3.2 kg/m 4.85 mm 32 mm
32-320 250 kN 320 kN 470 mm² 3.7 kg/m 5.80 mm 32 mm
32-360 280 kN 360 kN 520 mm² 4.0 kg/m 6.60 mm 32 mm
32-400 330 kN 400 kN 595 mm² 4.5 kg/m 8.20 mm 32 mm
38-420 350 kN 420 kN 670 mm² 5.20 kg/m 6.90 mm 38 mm
38-500 400 kN 500 kN 745 mm² 5.85 kg/m 8.00 mm 38 mm
38-540 450 kN 540 kN 802 mm² 6.3 kg/m 9.00 mm 38 mm
38-600 480 kN 600 kN 910 mm² 7.20 kg/m 10.60 mm 38 mm
51-550 450 kN 550 kN 810 mm² 6.35 kg/m 5.90 mm 51 mm
51-660 540 kN 660 kN 975 mm² 7.65 kg/m 7.30 mm 51 mm
51-800 640 kN 800 kN 1210 mm² 9.10 kg/m 9.10 mm 51 mm
51-930 730 kN 930 kN 1325 mm² 10.10 kg/m 10.40 mm 51 mm
The hollow bar meets the requirements of EN 14490 on metallic reinforcement.Thread according to ISO 1720 or 10208.
Self-drilling bar
Other availablesolutions
Diameters 76 - 88,9 - 101 Available to make on request
DRILLING DIAMETER (mm)
Treated steel With cemeted carbide inserts
Bit R32 R38 R51 R76 R32 R38 R51 R76
TRIPLEBLADE
76 7695
110
- 76 76 - -
TETRABLADE
515576
7690
115100115
115130150
51 - - -
BUTTON
515576
7690
100
100 | 115130 | 150180 | 200
100 | 115130 | 150180 | 200
5176
7690
115130
90115130
130
DROPBUTTON
515576
7690
115
100 | 115130 | 150180 | 200
130 | 150180 | 200
- - - -
Certifications
QUALITY
CONTROL TRACEABILITY
CERTIFICATIONS
All Ankorig products are tested and approved following the ISO 9001-2008 quality control.
Steel quality certificationInternal mechanical testingIndependent laboratory certificationSteel traceabilityCertified welding tests
Organismo Notificato/Notified body N./No. 0474RINA Services S.p.A. Via Corsica, 12 – 16128 Genova (GE)Italy
CERTIFICATO DI CONFORMITÀ DEL CONTROLLO DELLA PRODUZIONE IN FABBRICA /CERTIFICATE OF CONFORMITY OF THE FACTORY PRODUCTION CONTROL
N./No. 0474-CPR-1630
In conformità al Regolamento N. 305/2011/EU del Parlamento Europeo e del Consiglio del 9 marzo 2011 (RegolamentoProdotti da Costruzione o CPR), questo certificato si applica al prodotto da costruzione /
In compliance with Regulation No. 305/2011/EU of the European Parliament and of the Council of 9 March 2011 (the Construction Products Regulation or CPR), this certificate applies to the construction product
Componenti strutturali e kit per strutture di acciaio /Structural components and kits for steel structures
come descritto nell’allegato al presente certificato / as described in the annex to this certificate
prodotto dal fabbricante / produced by the manufacturer
ANKORIG S.R.L.
Via Passo del Gavia, 1/3 - 24060 Bagnatica (BG)
nello stabilimento di produzione / in the manufacturing plant
Via Passo del Gavia, 1/3 - 24060 Bagnatica (BG)
Il presente certificato attesta che tutte le disposizioni riguardanti la valutazione e la verifica della costanza della prestazionedescritte nell'Allegato ZA della norma /
This certificate attests that all provisions concerning the assessment and verification of constancy of performancedescribed in Annex ZA of the standard
EN 1090-1:2009/A1:2011
nell’ambito del sistema 2+, sono applicate e che / under system 2+, are applied and that
il controllo della produzione in fabbrica soddisfa tutti i requisiti prescritti di cui sopra / the factory production control fulfils all the prescribed requirements set out above
Il presente certificato è stato emesso la prima volta il 24/02/2017 ed ha validità sino a che i metodi di prova e/o i requisiti del controllo della produzione in fabbrica stabiliti nella norma armonizzata di cui sopra, utilizzati per valutare la prestazione delle caratteristiche dichiarate, non cambino, e il prodotto e le condizioni di produzione nello stabilimento non subiscano modifiche significative.
This certificate was first issued on 24/02/2017 and will remain valid as long as the test methods and/or factory production control requirements included in the harmonised standard set out above, used to assess the performance of the declared characteristics, do not change, and the product, and the manufacturing conditions in the plant are not modified significantly.
Genova, 24/02/2017RINA Services S.p.A.
Il Direttore Tecnico / Technical Manager
Revisione n. / Revision no.: 0
(Ing. Paolo SALZA)
RINA Services S.p.A. Società a socio unico RINA S.p.A. C.F. / P. Iva / R.I. Genova N. 03487840104 Tel. +39 010 53851 – Fax +39 010 5351000
Via Corsica, 12 – 16128 Genova Cap. Soc. € 35.000.000,00 i.v. www.rina.org - info@rina.org
QUALITY
TECHNICAL SUPPORT
INNOVATIVE SOLUTIONS
JUST-IN-TIME DELIVERY
SPECIAL PRODUCTION ON REQUEST
CONTACT US!ANKORIG.IT
www.ankorig.it
ANKORIG SRL Unipersonale
Via Passo del Gavia 1/3
24060 Bagnatica (BG) ITALY
T. +39 035 683211 - F. +39 035 676650
info@ankorig.it
Tax Code: 03828170161
V.0
4_0
9_1
8_E
N
Recommended