View
154
Download
1
Category
Preview:
Citation preview
Date11-Apr-23
Checked
Jukka HaapasaariApproved
Jussi YlinenIssue4.0
DN 0123445 4-0en
WORK INSTRUCTION
Nokia Standard Document Template
NO
CABLE MARKING ON ULTRASITE BTS SITES Page 2(8)
CONTENTS
1. PURPOSE.................................................................................................................................................................... 3
2. SCOPE......................................................................................................................................................................... 3
3. RESPONSIBILITIES.................................................................................................................................................. 3
4. PROCEDURE.............................................................................................................................................................. 3
4.1. TOOLS AND MATERIALS REQUIRED.......................................................................................................................... 34.2. CABLE IDENTIFICATION SYSTEM............................................................................................................................. 44.3. INSTALLATION OF THE LABELS................................................................................................................................ 5
5. REFERENCES............................................................................................................................................................ 6
6. RELATED DOCUMENTS.......................................................................................................................................... 6
7. DOCUMENT REVISION HISTORY......................................................................................................................... 6
8. DISTRIBUTION LIST................................................................................................................................................ 6
9. APPENDICES............................................................................................................................................................. 6
Appendix 1: Standard Cable Label Set of Ultrasite BTS Kit.............................................................................................7Appendix 2: Standard Basic (A) Cabinet Labelling example............................................................................................8
Date11-Apr-23
Checked
Jukka HaapasaariApproved
Jussi YlinenIssue4.0
DN 0123445 4-0en
CABLE MARKING ON ULTRASITE BTS SITES Page 3(8)
1. PURPOSE
The purpose of the document is to give a proposition for cable identification system for indoor & outdoor Ultrasite Base Station sites.
Purpose of cable identification is to install the cables of the BTS site correct and to ensure the cables are possible to find and separate from each other when later needed.
Description of proposition of cable identification system of BTS sites is given in the following chapters. Cable marking is part of the scope of work for Telecom implementation subcontractors.
2. SCOPE
The document is to be applied to indoor and outdoor ULTRASITE BTS installations. The other instructions for installation of ULTRASITE BTS are given in generic Work Instructions for BTS Installation /1/ and /2/.
3. RESPONSIBILITIES
Authorisation Site Engineering Manager
Review and amendments Site Engineering Personnel
Local review and changes Site Engineering Personnel
Introduction on Projects Project Managers
4. PROCEDURE
4.1. Tools and materials required
TOOLS:- Side cutters.- The specific installation tool for cable tie is recommended, but not essential.
MATERIALS:- Cable marking set for ULTRASITE indoor/outdoor BTS: (CS 73331.XX)
Date11-Apr-23
Checked
Jukka HaapasaariApproved
Jussi YlinenIssue4.0
DN 0123445 4-0en
CABLE MARKING ON ULTRASITE BTS SITES Page 4(8)
Cable marking set ULTRASITE BTS LABELS FOR (CS 73331.XX) consist of:- 16 pcs small (10´40) series 1xxx labels for earthing cables- 6 pcs small (10´40) series 2xxx labels for AC supply cables- 14 pcs small (10´40) series 3xxx labels for DC supply cables- 26 pcs big (22´50) series 4xxx labels for RF cables- 18 pcs small (10´40) series 5xxx labels for PCM cables- 6 pcs small (10´40) series 6xxx labels for external alarm cables- 200 pcs small (2,4´92 mm) black cable ties- 50 pcs big (4,8´186 mm) black cable ties
4.2. Cable identification system
The cable identification system of Nokia consists of two plastics labels on each cable, one label in the both ends of the cable. The identification number of the label shows the function of the cable and it is also a running number of the cable. The labels of the antenna feeders are also coloured so that each sector has its own identification colour. The materials of the labels are selected also for outdoor use.
DIGIT
1st 2nd 3rd 4th
GROUNDING 1
AC SUPPLY 2
FUNCTION DC SUPPLY 3
RF 4
PCM 5
ALARM 6
1...9 1 to 9
0 if no meaning
BASE STATION
1...9 1 to 9
0 if no meaning
SECTOR OR CABINET
FUNCTION
0...9 0 to 9(See Note )
SERIAL NUMBER
Note: TX feeder 0,RX feeder 1,RD feeder 2
Table 1. Identification code of the label.
Date11-Apr-23
Checked
Jukka HaapasaariApproved
Jussi YlinenIssue4.0
DN 0123445 4-0en
CABLE MARKING ON ULTRASITE BTS SITES Page 5(8)
Figure 1. Labels and cable ties.
4.3. Installation of the labels
The labels are mounted to the cables according to the Figures 2 and 3.
Figure 2. Mounting of the big label.
Date11-Apr-23
Checked
Jukka HaapasaariApproved
Jussi YlinenIssue4.0
DN 0123445 4-0en
CABLE MARKING ON ULTRASITE BTS SITES Page 6(8)
Figure 3. Mounting of the small label.
Tie one label to the both ends of the cable. Cut off the extra "tail" of the cable tie. Make sure that the labels of the antenna feeders can be seen on the ground level as well as possible.
Note! Cable has to be marked immediately after it is mounted and connected!
5. REFERENCES
None.
6. RELATED DOCUMENTS
/1/ ULTRASITE BTS Installation/2/ ULTRASITE INDOOR BTS Installation kit
7. DOCUMENT REVISION HISTORY
DATE ISSUE AUTHOR SUMMARY OF CHANGES
29 Mar 2001 1.0 Jukka Haapasaari 1st Release
31.8.2001 2.0 Jukka Haapasaari TX/RX and RXD definition changed to ANT 1 and ANT 2
27.9.2001 3.0 Jukka Haapasaari IBBU changed to NUSS and label 1003 is used for Battery extension cabinet
9.1.2002 4.0 Jukka Haapasaari Aviation warning lights DC supply, alarm cable labels added and PCM cable TX and RX cables separated
8. DISTRIBUTION LIST
DISTRIBUTION LIST FOR DOCUMENT:
9. APPENDICES
Date11-Apr-23
Checked
Jukka HaapasaariApproved
Jussi YlinenIssue4.0
DN 0123445 4-0en
CABLE MARKING ON ULTRASITE BTS SITES Page 7(8)
1. APPENDIX 1: STANDARD CABLE LABEL SET OF ULTRASITE BTS KIT
NUMBER OF BAG SPECIFIC USE CODE SIZE COLOUR NUMBERBTS A grounding 1110 10×40 black 2
1 BTS B grounding 1120 10×40 black 2BTS C grounding 1130 10×40 black 2
GROUNDING CABLES BTS D grounding 1140 10×40 black 2NUSS grounding 1000 10×40 black 2MDF/DDF grounding 1001 10×40 black 2Transmission Rack grounding 1002 10×40 black 2Battery extension cabinet 1003 10×40 black 2
1st NUSS supply cable 2000 10×40 black 22 2nd NUSS supply cable 2001 10×40 black 2
AC SUPPLY CABLES Spare 2002 10×40 black 2
1st DC supply for BTS A-rack 3110 10×40 black 23 2nd DC supply for BTS A-rack 3111 10×40 black 2
1st DC supply for BTS B-rack 3120 10×40 black 2DC SUPPLY CABLES 2nd DC supply for BTS B-rack 3121 10×40 black 2
1st transmission Rack supply 3000 10×40 black 22nd transmission Rack supply 3001 10×40 black 2DC supply for aviation lights 3002 10×40 black 2
1st sector ANT 1 4110 25×50 white 44 1st sector ANT 2 4112 25×50 white 4
2nd sector ANT 1 4120 25×50 red 4RF CABLES 2nd sector ANT 2 4122 25×50 red 4
3rd sector ANT 1 4130 25×50 blue 43rd sector ANT 2 4132 25×50 blue 4Spare 4000 25×50 black 2
1st 2Mbts cable BTS TX 5110 10×40 black 21st 2Mbts cable BTS RX 5111 10×40 black 22nd 2Mbts cable BTS TX 5120 10×40 black 22nd 2Mbts cable BTS RX 5121 10×40 black 2
5 3nd 2Mbts cable BTS TX 5130 10×40 black 23rd 2Mbts cable BTS RX 5131 10×40 black 2
PCM CABLES 4th 2Mbts cable BTS TX 5140 10×40 black 24th 2Mbts cable BTS RX 5141 10×40 black 2Spare 5000 10×40 black 2
Aviation lights alarm 6110 10×40 black 26 Customer Alarms 13-24 6120 10×40 black 2
ALARM CABLES Spare 6000 10×40 black 2
CABLE TIES: 2,5 ´ 100 mm black 200 pcs 4,8 ´ 186 mm black100 pcs
Date11-Apr-23
Checked
Jukka HaapasaariApproved
Jussi YlinenIssue4.0
DN 0123445 4-0en
Appendix 2: Standard Basic (A) Cabinet Labelling example
Date11-Apr-23
Checked
Jukka HaapasaariApproved
Jussi YlinenIssue4.0
DN 0123445 4-0en
Recommended